Filters

List of base-door Tenders

List of latest base-door Tenders in Indian Tenders. Click on any base-door Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for base-door Tenders.

All-Tenders (25)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :34979680 | 07 Aug, 2025

Tender Value : 1.40 Crore

Baramulla - Jammu And Kashmir

Tender for gem bids for rubik, bid number gem2025b6505627 dated 28-07-2025 bid document1 40 1 1 permanent defence pd rubik of size 2.55m x 2.55m o o and2.10 m height with thickness of interlocking hollow block 25mm thick, hdpe laminated sand bag of size 75x40 cm, shs 6 mm thick size 120x120mm x 2.4m long for columnwith holes, ismb 150 rsj 150 x 75 mm g1 3050 mtr longfor beam, ismb 150 rsj 150 x 75 mm g2 2.20 mtr long forbeam 2, ismb 125 rsj 125 x 70mm g3 0.40 mtr long forbeam, 6 mm thick ms base plate of size 150x150mm forshs column, 12mm dia nut bolt 75mm long inserted in12mm dia eight nos hole in each column., steel roofingtrough srt of size 1630 mm x 613 mm x 180 mm made outof 2 mm thick hot rolled carbon steel sheet, ms hexagonalnuts. bolts and washers 12 mm dia 40 mm long., ldpesheet 3 m wide weighing 1.00 kg rm black in colour, redoxide primer conforming to relevant is, synthetic enamelpaint colour green, thinner sample to be approved beforesupply, dry distemper sample to be approved beforesupply, chalk whiting sample to be approved before supply, paint brush 4 inch, pre fabricated double door shuttersteel door of size 1100mmx1900mm made out of 2mm thick, supply of swivel bullet proof glass glass 610mm x300mmx72 mm thick, silicone gel sealent of 01 pack of 400 gmsincluding aplicator gun, ply wood 10 mm thick for pcc formwork., foundation bolts of 16 mm dia and 250 m long withnut bolts washer etc., sifcon pre fabricated interlockingrcc blocks., aggregate 20mm., natural manufacturedsand, aggregate 40mm, rapidite conforming to is 13442018 make acclerex cico fosroc, integrated water proofingcompound., aluminimum straight edge 50mm squre 2mmthick 1800mm long, wooden flat gurmala, water levelingpipe pvc 100 mtr, hand rivet gun machine, drill bit 6mmdia, drill bit 8mm dia, tape measuring metallic 30 m, mason trowel karchi, tasla iron 18 inch, shovel withwooden handle, axe picks with wooden handle, fawda withwooden handle, crobar 5 feet long, rammer with woodenhandle of wt 5 10 kg, sieve for sieving fine and crose agg900 x 1500mm made of angle iron frame with stand, brickhammer 1 2 kgs, cutting plier insulate 6 inch, screwdriver 12 inch with insulated plastic, pipe wrench 12 inch, pipe wrench 18 inch, adjustable spanner 12 inch, hacksawframe with 2 blade, hand gloves canvas with isi mark, aluminium sprit level 6 inch, brick line, plumbob

corporations/Associations/Others

TRN :34982320 | 04 Aug, 2025

Tender Value : 9.50 Crore

Nagaur - Rajasthan

Tender for based system for door to door municipal solid waste collection segregation and transportation of segregated waste to mrf processing plant in ward no. 01 to 60 of municipal council nagaur for 2 years.

Central Government/Public Sector

TRN :34985122 | 19 Aug, 2025

Tender Value : 0

Allahabad - Uttar Pradesh

Tender for gem bids for rhs of size 96x48x4mm with two coat of paint and one coat of red oxide , rhs of size 66x33x2.90mm with two coat of paint and one coat of red oxide , 6mm thick ms plate for purlin plates of sizes 100x50mm with two coat of paint and one coat of red oxide , normal nut and bolts of size 12mm dia and 100mm long , normal nut and bolts of size 16mm dia and 100mm long , foundation bolts of size 16mm dia and 450mm long , ppgi roof sheet 0.60mm sand colour , ppgi roof sheet 0.60mm , ppgi plain sheet side 1.25mm thick sand colour of size 3x0.60m , cement opc 43 grade in hdpe bag of 50 kg , quick setting compound rapidite , super plasticizers admixture for concrete , natural sand , aggregate 20mm , aggregate 40mm , 3mm thick app based polymeric membrane size 10x1m , water proof siliver paint , bond stone , pcc solid blocks of size 400x200x200mm , aac solid blocks of size 450x300x200mm , non skid water proof tiles 1200x600mm and 10mm thick , ms tmt bars 12 mm dia , ms tmt bars 10 mm dia , ms tmt bars 08 mm dia , ms binding wire not less than 0.9mm dia , asian paints acrylic distemper white smooth finish , white putty , 9 inch stainless steel putty scraper , white cement , paint brush 4inches , 9 inch roller brush , welding rod , self taping screw of size 3inch long. , hdpe sand bags of size 840x360mm , anodised aluminium snap grid frame work for false ceiling with hangers 6mm dia , 12mm thick seamless calcium silicate ceiling of size 600x600mm. , factory made upvc white colour paneled 5mm thick toughened glazed door , factory made upvc white colour sliding window , form work type 2 , fire extinguisher 2 kg , pvc ceiling rose 2by3 terminal with pvc square box complete with screws , led tube light fitting 18w 4 feet long , xlpe insulated pvc seathed heavy duty armoured multi core cable 16 sqmm 2 core aluminum conductor , cable pvc insulated unsheathed single core flexible copper conductor 1100v grade of size 1.5 sqmm , cable pvc insulated unsheathed single core flexible copper conductor 1100v grade of size 2.5 sqmm cable pvc insulated and pvc sheathed 1100v grade twin core with stranded aluminium conductor , modular switch one way 6 amps one module , ms screw 20 mm per pkt-100 nos , ms screw 25 mm per pkt 100 nos , insulation tape 2 cm width 10 mtr long , mcb single pole 230v ac 50 hz 6 amps 10ka , mcb four pole 230v ac 50 hz 100 amps , mcb distribution boards in sheet metal enclosure 6 ways double door with blanks confirming to is 8623 , mcb distribution boards in sheet metal enclosure 4 ways double door with blanks confirming to is 8623 , residual current circuit breaker with over load and short circuit protection four pole 100 amps , modular switch one way 16 amp 1 module , modular socket 6a 2or3 pin combined 2 module , modular socket 16a 2or3 pin combined 2 module , white cover plate with frame 3 module , white cover plate with frame 6 module , white cover plate with frame 8 module , metal flush box 3 module , metal flush box 6 module , metal flush box 8 module , compact street light luminaire with deep drawn housing complete along with single 36w frl , pvc concealed pipe 25mm dia , pvc concealed l bend 25mm , pvc concealed t 25mm , pvc concealed elbow 25mm dia , pvc casing caping square box 4x4 inches , ceiling fan 1200mm sweep , lightening conductor and earthing of building

Central Government/Public Sector

TRN :34972360 | 18 Aug, 2025

Tender Value : 9.95 Lacs

Ajmer - Rajasthan

Tender for gem bids for coarse sand , stone aggregate , white cement based putty , vitrified tile , tile adhesive , cement opc 43 , glass putty , white cement , distemper , fevicol , wpc door , wooden gate with wiremesh , wc seat indian , toilet seat western , welding electrodes , glass panes , bricks , wire isi marked , 4 sqmm wire isi marked , 16 sqmm armed cable isi marked , casing caping , capacitor , wood cutter blade , fan regulator modular , electrical tape , hydaraullic door closer , ball cock 20mm , pillar tap , 16 amp switch socket box , mcb 40amp isi marked , led bulb 9w , ceiling fan , cable clip 9mm , cistern flush tank , solvent , bib cock long isi marked , bib cock short isi marked , taflon tape , cpvc coupler 25mm isi marked , cpvc elbow 25mm , m seal 100gm , cpvc end cap 15mm , cpvc end cap 20mm isi marked , cpvc end cap 25mm isi marked , cp niple mfta isi marked , cpvc pipe 20mm isi marked , 6 amp switch isi marked , 6 amp socket isi marked , exhaust fan 300mm isi marked , round cable isi marked , round cable 4 sqmm isi marked , pigment 50ml , paint brush 100mm , paint brush 150mm , paint roller big size , wheek saw blade 12inch , aluminium aldrop lock , street light 45w isi marked

State Government

TRN :34976139 | 27 Aug, 2025

Tender Value : 13.59 Lacs

Bhopal - Madhya Pradesh

Tender for gem bids for high mast lighting tower for large area with led floodlighting system q3, xlpe cable for working voltages upto and including 1.1 kv as per is 7098 part 1 q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellercertificate requested in atcin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension1; 9; 9 d d, , g g -- / / number of days for which bidwould be auto--extended7 d /bid number: gem/2025/b/6505250; /dated: 28-07-2025 & & / bid document1 / 10 o %o % ;5 ;5 ; ; /bid to ra enabledno 4 4 /type of bidtwo packet bid4 4 r r /primary product categoryhigh mast lighting tower for large area with led floodlighting system s s & u & u /time allowed for technicalclarifications during technical evaluation2 days v v b b w w v v 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno s s /estimated bid value1359771 s s w w /evaluation methodtotal value wise evaluation y & y & /arbitration clauseno /mediation clauseno //bid details /emd detail > /advisory bankstate bank of india /emd amount13597 /epbg detail b /requirednoa. . % & 4& % & % 4 > \ o 9 /emd exemption: the bidder seeking emd exemption, must submit the valid supporting documentfor the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods andservice providers for services are eligible for exemption from emd. traders are excluded from the purview of thispolicy.b. , , v < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. /beneficiary : cmobhopal, urban development and environment department, urban administration and devlopment, chief municipal officer ashta /splitting ; / bid splitting not applied.2 / 10 /mse purchase preference /mse purchase preferenceno /mii purchase preference /mii purchase preferenceno1. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. high mast lighting tower for large area with led flood lighting system 4 pieces u u /technical specifications u / as per gem category speci cation /speci cation u u /specificationname b b s s /bid requirementallowed valuesgenericheight of high mast towerin meters16installation andcommissioning installationand commissioning work atmultiple locations shallfollow as per the guidelinesof state/central govt rulesand regulations asapplicableyes. including civil work for mining sites for miningsites all electricalss, winch mechanism, lamps control-gears, breakers, cables etc shall be suitable for 230 vl-l, 50 hz supply and with rccb/elcb basedprotection provided with suitable range to complyrelevant cea regulation 42onsite warranty in years2high mast systemno of sections2effective length of eachsection in m10material construction: themast shall be manufacturedusing special steel plates, conforming to355 gradeasper bsen10 025bottom diameter in mm -minimum540plate thickness for middlein mm - minimum4plate thickness for bottomin mm - minimum53 / 10 no of longitudinal welds /section in nos1diameter of base plate inmm - minimum740thickness of base plate inmm - minimum25wind loadmaximum wind load47 m/secdoor openingsize of opening and closingdoor at base compartmentof high mast in mm -minimum1200 x 250junction boxingress protection forjunction box i.e. ip class asper is/iec:60529:2001latest test report fromcentral governmentlab/nabl/ilac accrediatedlab and report shall furnishto buyer on demandip 65no of core3cable categoryfrsize of cable in sq mm2.5conductor material shall becopperwinchthe winch shall haveprovision for manualoperation in case of failureof the motoryesstainless steel wireropethe breaking load of eachrope shall be at full load asper the relevant standard>/ 2250kgelectrical system, cable and cableconnectionsno. of cores3cable shall bearmouredconudctor material shall becoppercable category1incoming power cable fromfeeder panel to basecompartment of mast andcable shall conforming tois:7098 part 1:1988 latestfeeder pillar panelfeeder pillar panel for eachmastyesfeeder panel shall besuitable for230 v l-l, 3 phase, ac 50 hz for mining areaformining sites all electricals, winch mechanism, lampscontrol-gears, breakers, cables etc shall be suitablefor 230vl-l, 50 hz supplythe control panels shall bestand mounted /speci cation u u /specificationname b b s s /bid requirementallowed values4 / 10 ingress protection forfeeder pillar panel i.e ipclass as peris/iec:60529:2001latest.test report shallfurnish from centralgovernment lab/nabl/ilacaccrediated lab to buyer ondemandip 55it shall be fabricated out of14 swg crca sheet steelthickness of sheet in mm2the panels shall be givenpre-treatment and powdercoated and color shall begreythe stand shall be paintedinblack colorcable entry shall be at thebottomthe panels shall haveknock outs of the required cablelaminated circuit diagramshall be pastedinside of the doorfeeder pillar shall have padlocking arrangementyesearth terminal12 mm dia. boltspanel shall have a slopingcover to avoid accumulationof dustyespanel shall be providedwith incoming & outgoingmccb / mcb of appropriaterating and in desiredquantity depending on totalno of circuits in useyestimer for automatic on &off of lights with pilotlamps shall be providedyesbus bars materialyes. copperno of cores3size of cable in sq.mm2.5cable shall bearmouredthe conductor materialshall becoppercable category1led flood lightluminaireno. of luminaires for eachhigh mast lighting tower innos10 /speci cation u u /specificationname b b s s /bid requirementallowed values5 / 10 led rating/systemwattage/rated power foreach luminaire150wluminaire system efficacylumen/watt>/ 100 lm/wattingress protection iprating as per is:10322part 1:1982 latestip65mounting bracketsincludedadjustableinput operating voltagerange and frequency90 to 300 volts ac at 50hz+/-2hzrated voltage230 v ac 50 hzcolour temperature6000k +/- 500koptic lense material uvstabilised write na forwithout optic lense supplypoly carbonate lenseoperating temperaturerange-20 deg c to +50 deg cthe luminaire shall beprotected against surgesand transients internal>/ 5kvnumber of electroniccontrol gear per luminairepower supplies4 nos.length of isi marked threecore wire shall be providedalong with supply ofmaterial50 cm /speci cation u u /specificationname b b s s /bid requirementallowed values & & g& g& / installation commissioning and testing ictdetails for the above item:% of product cost payable on product delivery70%min cost allocation for ict as a % of product cost30%number of days allowed for ict after site readinesscommunication to seller15 days //o ; a o ; a /consignees/reporting officer and quantity6 / 10 . .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1vinod kumarprajapati466116, nagar palikaparishad ashta near newbus stand ashta4180xlpe cable for working voltages up to and including 1.1 kv as per is 7098 part 1 500 meter u u /technical specifications* u / as per gem category speci cation /speci cation u u /specificationname b b s s /bid requirementallowed valuesstandardsconformity of thespecification for xlpe cableas per is:7098 part 1: 1988 latestcables suitable for use inminesyes, nocables suitable for use inlow temperatureapplicationsyes, nogenericclassification of cables forimproved fire performacecategory01, c1 - fr, c2 - fr-lshnominal area of conductorin sq mm16number of core in nos4constructionmaterial of conductorplain copper, aluminiumtype of inner sheathvulcanized rubber, un-vulcanized rubber, thermoplasticarmouringtype of cablearmoured cable, un-armoured cablematerial of armouringgalvanized round steel wire, galvanized steel formedwire, aluminium round wire, aluminium flat strip, notapplicble for un-armoured cabletype of armouringsingle wire, double wire, single strip, double strip, not applicble for un-armoured cablecertificationavailability of optional testreportscold bend test for outer sheath, cold impact test forouter sheath, resistance test for armour, notapplicable & & g& g& / installation commissioning and testing ict7 / 10 details for the above item:% of product cost payable on product delivery70%min cost allocation for ict as a % of product cost30%number of days allowed for ict after site readinesscommunication to seller15 days //o ; a o ; a /consignees/reporting officer and quantity5. .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1vinod kumarprajapati466116, nagar palikaparishad ashta near newbus stand ashta5001805 5 : : d d/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. genericafter award of contract successful bidder shall have to get detailed design drawings approved frombuyer before starting fabrication. successful bidder shall submit detailed design drawings for buyersapproval, within 7 days of award of contract. buyer shall, either approve the drawings or will providecomplete list of modification required in the drawings within 7 days. seller shall be required to ensuresupply as per approved drawings with modifications as communicated by buyer. if there is delay frombuyer side in approval of drawing the delivery period shall be refixed without ld for the period of delayin approval of drawing.3. genericdata sheet of the products offered in the bid, are to be uploaded along with the bid documents. buyerscan match and verify the data sheet with the product specifications offered. in case of any unexplainedmismatch of technical parameters, the bid is liable for rejection.4. genericexperience criteria: the bidder or its oem themselves or through resellers should have regularly, manufactured and supplied same or

Central Government/Public Sector

TRN :34962124 | 19 Aug, 2025

Tender Value : 0

Gorakhpur - Uttar Pradesh

Tender for supply installation and fitment of sensor based automatic door controller ..

Central Government/Public Sector

TRN :34963277 | 01 Aug, 2025

Tender Value : 0

Chittaranjan - West Bengal

Tender for supply of shim and pad for cab door & m/r door hinge base & striker plate base for wag-9hc loco..

Central Government/Public Sector

TRN :34965112 | 18 Aug, 2025

Tender Value : 5.17 Lacs

Sonipat - Haryana

Tender for gem bids for motor , v belt , condenser , labour charge , compressor gas , coil repairing , fan blade , door rubber , gas , cylinder head , crank assembly , main bearing , filter , engine oil , packing kit , oil pump assemble , piston , ring set , cunkting pad , head valve , fuel pump , bearing and head , engine opening and fitting , presure assembly , chain set , gair oil , bearing , gear box , gear fork , gear seal , belt , leath work , labour gear box , compressor acr444 , relay , olp , capacitor , labour charge , motor repair , wiring replacement , motor copper binding , delta hmi touch screen , plc to hmi wiring , programing , frontms plate , wire , 12 inch by 20 inch glass , stripper pad , boss slide , pressure roller , cover f stripper pad , base stipper pad , frame panel , main swpcb , start key , serrvices charges , master making pcb , wire harness mm unit , sensor , plate elevator r , plate elevator f , elevator shaft assembly , elevator rack pf , alane boilt , timer puli sim , lock , bibrator seat , nylon bailt roll , rubber roller water roller ss , water roller ss , rider tray ss , rider roller ss , water vest tray , ink cleaner rubber , service charges , copper binding , brakes , 40005372 feed motor assy. , service chargess , motor binding , fan sheet , grassor honeycomb , fan blades , water pump , motor leg , three pin top , regulator

Central Government / Public Sector

TRN :34940184 | 11 Aug, 2025

Tender Value : 0

Vijayawada - Andhra Pradesh

Tender for supply of set of entrance door window glass gaskets for wap4 locos consisting of 04 items as follows. 1 ref, no. 1 : base gasket-1 as per drg. no. b/trs/g7/cab/3/7 or latest if any. qty/set. 100 metres. 2 ref. no. 2 : base gasket-2 as per drg. no. b/trs/g7/cab/3/7 or latest if any. qty/set. 100 metres. 3 ref. no. 3 : front gasket- 1 as per drg. no. b/trs/g7/cab/3/7 or latest if any. qty/set. 100 metres. 4 ref. no. 4 : front gasket-2 as per drg. no. b/trs/g7/cab/3/7 or latest if any. qty/set. 100 metres..

Central Government/Public Sector

TRN :34941542 | 01 Aug, 2025

Tender Value : 35.79 Lacs

Karwar - Karnataka

Tender for addition and alteration to existing structure at ambe kodar, provision of hard top and armoury and special repairs to electrical operated doors at b3, b4 and l1 to l6 hangers at ins vajrakosh at naval base

Related Searched Keywords : base door

List of base-door Tenders

Tender for based system for door to door municipal solid waste collection segregation and transportation of segregated waste to mrf processing plant in ward no. 01 to 60 of municipal council nagaur for 2 years.

Tender for supply installation and fitment of sensor based automatic door controller ..

Tender for supply of shim and pad for cab door & m/r door hinge base & striker plate base for wag-9hc loco..

Tender for addition and alteration to existing structure at ambe kodar, provision of hard top and armoury and special repairs to electrical operated doors at b3, b4 and l1 to l6 hangers at ins vajrakosh at naval base

Get base door Tender Alert...

Related Searched Keywords : base door

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us