Filters

List of latest armour-panel Tenders in Indian Tenders. Click on any armour-panel Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for armour-panel Tenders.

All-Tenders (9)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :19338701 | 07 Nov, 2020

Tender Value : 52.70 Lacs

Uttarkshi - Uttaranchal

Tender for solid waste earth work in excavation by mechanical means hydraulic excavator/manual means over areas exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm or plan including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge. all kinds of soil filling available excavated earth excluding rock in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and lift upto 1.5m. supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- all work up to plinth level : 1:4:8 1 cement : 4coarse sand : 8 graded stone aggregate 40 mm nominal size. providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- all work up to plinth level : 1:3:6 1 cement : 3 coarse sandzone-iii : 6 graded stone aggregate 20 mm nominal size. providing and laying in position machine batched and machine mixed design mix m -25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-in-charge.note:cement content considered in this item is @330 kg/cum.excess/ less cement used as per design mix is payable/recoverable separately. all works upto plinth level providing and laying in position machine batched and machine mixed design mix m 25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-in-charge.note:cement content considered in this item is @330 kg/cum.excess/ less cement used as per design mix is payable/recoverable separately. all works above plinth level upto floor v level steel reinforment for r.c.c. work including straighting, cutting bending, placing in position and binding all complete upto plinth level. thermomechanically treated bars of grade fe500d or more. centering and shuttering including strutting, propping etc. and removal of forms for all heights : foundations, footing, bases of columns, etc. for mass concrete. columns, pillers, piers, abutments, posts and struts lintels, beams, plinth beams, girders, bressumers and cantilevers brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 1 cement :6 coarse sand 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size and top layer 12 mm thick cement hardener consisting of mix 1:2 1 cement hardener mix:2 graded stone aggregate 6 mm nominal size by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturers specifications. this includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete providing 12 mm cement plaster 1:6 with clean fine sand inner side structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. providing and fixing precoated galvanised iron profile sheets size, shape and pitch of corrugation as approved by engineer-in-charge 0.50 mm +0.05 % total coated with zinc coating 120 thickness grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineer in- charge. the sheet shall be fixed using self drilling /self tapping screws of size 5.5x 55 mm with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. providing and fixing precoated galvanized steel sheet roofing accessories 0.50 mm +0.05 % total coated thickness, zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete: ridges plain500-600mm providing and fixing precoated galvanized steel sheet roofing accessories 0.50 mm +0.05 % total coated thickness, zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete: gutter 600mm over all girth boundary wall earth work in excavation by mechanical means hydraulic excavator/ manual means over areas exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge. all kinds of soil. filling available excavated earth excluding rock in trenches, plinth, sides of foundation etc. in layer not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and lift upto 1.5m providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- all work up to plinth level : 1:4:8 1 cement : 4coarse sand zone-iii : 8 graded stone aggregate 40 mm nominal size. providing and laying in position machine batched and machine mixed design mix m -25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-in-charge.note:cement content considered in this item is @330 kg/cum.excess/ less cement used as per design mix is payable/recoverable separately. all works upto plinth level providing and laying in position machine batched and machine mixed design mix m -25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-in-charge.note:cement content considered in this item is @330 kg/cum.excess/ less cement used as per design mix is payable/recoverable separately. all works above plinth level upto floor v level centering and shuttering including strutting, propping etc. and removal of form for all heights: foundations, footings, bases of columns, etc.for mass concrete centering and shuttering including strutting, propping etc. and removal of form for all heights: columns, pillars, piers, abutments, posts and struts bricks work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : cement mortar 1:6 1 cement :6 coarse sand 15 mm cement plaster on the rough side of single or half brick wall of mix: 1:6 1 cement: 6 fine sand finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: new work two or more coats applied @ 1.43ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/10 sqm fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m minimum, between the two posts fitted and fixed with g.i. staples, turn buckles etc, complete. cost of posts, struts, earth work and concrete work to be paid for separately. payment to be made per metre cost of total length of barbed wire used. with g.i. barbed wire supplying at site angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10cm length and drilling holes upto 10mm dia. etc.complete. steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. thermo-mechanically treated bars of grade fe-500d or more. entry gate providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete. fixed to steel windows by welding. security cabin earth work in excavation by mechanical means hydraulic excavator/ manual means over areas exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge. all kinds of soil. filling available excavated earth excluding rock in trenches, plinth, sides of foundation etc. in layer not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and lift upto 1.5m supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- all work up to plinth level : 1:4:8 1 cement : 4coarse sand : 8 graded stone aggregate 40 mm nominal size. bricks work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in foundation and plinth in : cement mortar 1:4 1 cement : 4 coarse sand providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 1 cement: 2 coarse sand zone-iii : 4 graded stone aggregate 12.5 mm nominal size brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : cement mortar 1:6 1 cement : 6 coarse sand providing and laying in position machine batched and machine mixed design mix m -25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-in-charge. note:cement content considered in this item is @330 kg/cum.excess/ less cement used as per design mix is payable/recoverable separately. all works above plinth level upto floor v level providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length hold fast lugs or dash fastener shall be paid for separately : saal wood providing and fixing paneled or paneled and glazed shutter for doors, windows and clerestory windows, including isi marked m.s. pressed but things bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of engineer-in-charge, 35mm thick shutters steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. thermo-mechanically treated bars of grade fe-500d or more 12mm cement plaster on the rough side of single or half brick wall of mix: 1:6 1 cement : 6 fine sand 40 mm thick cement concrete flooring with concrete hardener topping, under layer 40mm thick cement concrete 1:2:4 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size and top layer 12mm thick cement hardener consisting of mix 1:2 1 cement hardener mix: 2 graded stone aggregate 6mm nominal size by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturers specifications. this includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. white washing with lime to give an even shade : new work three or more coats with ready mixed pink or grey primer of approved brand and manufacture on wood work hard and soft wood painting with oil type wood preservation of approved brand and manufacture: new work two or more coats providing and laying non-pressure np2 class light duty r.c.c. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 1 cement: 2 fine sand including testing of joints etc. complete: 100mm dia. r.c.c. pipe sub head- i scheduled items --wiring wgstlpt point wiring in pvc conduit, with modular type switch. wiring for light point/ fan point/ exhaust fan point/call bell point with 1.5 sq/mm frls pvc insulated copper conductor single core cable in surface/ recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm. frls pvc insulated copper conductor single core cable etc. as required. group b wgstlpp2 power plug wiring in pvc conduit 2x4 sq.mm wiring for light /power plug with 2x4 sq.mm fr pvc insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 no 4 sq.mm fr pvc insualted copper conductor single core cable for loop earthing as required. tlwgec telephone wiring in pvc conduit: supplying and drawing following pair 0.5mm dia frls pvc insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ pvc conduit as required. 2pair pvccon s/f pvc conduit: supplying and drawing fixing of following sizes of pvc conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm mb s/f metal boxes: supplying and fixing metal box of following sizes nominal size on surface or in recesswith suitable size of phenlic laminated sheet coer in front including painting etc as required. 75mm x 75mm x 60mm deep ptsweb s/f modular type switch/ socket: suppling and fixing following midular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch 3 pin 5/6 amp socket outlet telephone socket outlet modfreb s/f modular type electronic fan regulator: supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. ppaccpt s/f power plug point modular type accessories: supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 &15/16 amps modular switch, connection etc. as required. creb s/f ceiling rose: supplying and fixing 3 pin, 5 amp. ceiling rose on the existing junction box/ wooden block including connection etc. as required itcffsur itc fluorescent fitting directly on surface: installation, testing and commissioning of pre-wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq.mm fr pvc insulated, copper conductor, single core cable and earthing etc. as required. itccffc itc ceiling fan with cover on fan box: installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length upto 30 cm with 1.5 sq.mm fr pvc insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick m.s.sheet with its top surface hackedfor proper bonding, top lid shall be screwed into the cast iron/ m.s.sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. clamp shall be made of 12mm dia m.s. bar bent to shape as per standard drawing. sub head - ii non scheduled/ extra items ceiling fan supply of ac 230/250 volts, 50 hz energy efficient ceiling fan with standard down rod, blades, 2 nos. caps etc. complete make: bajaj/ crompton/ havells 1200mm sweep supply of following sizes of pvc sheathed lt xlpe armoured, aluminium 1.1kv grade, as required of the following sizes. 3.5c x 50 sq.mm cable 4c x 10 sq.mm cable storm water drain earth work in excavation by mechanical means hydraulic excavator/ manual means over areas exceeding 30cm in depth, 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, as directed by engineer-in - charge. all kind of soil. filling available excavated earth excluding rockin trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and lift upto 1.5m. providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level: 1:4:8 1 cement : 4 coarse sand zone-iii : 8 graded stone aggregate 40mm nominal size brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in foundation and plinth in : cement mortar 1:6 1 cement : 6 coarse sand centering and shuttering including strutting, propping etc. and removal of form for all heights: foundations, footings, bases of columns, etc. for mass concrete 15mm cement plaster on the rough side of single or half brick wall of mix : 1:4 1 cement: 6 fine sand green belt 213 m nos of plants in 2m x 2m grid taking distance 2m difference between two plant trenching in ordinary soil up to a deapth of 60 cm including removal and stacking of serviceable materials and neatly levelling with in lead of 50 m and making up the treanched area to proper levals by fitting with earth or earth mix with sludge or/and manure before and after flooding treanch with water 3.50 m wide concrete road 130 m earth work in excavation by mechanical means hydraulic excavator/ manual means over areas exceeding 30cm in depth, 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, as directed by engineer in charge.all kind of soil. preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dreassing to camber and consolidating with road roller including making good and undulation etc and re-rolling sub grade and disposal of surplus earth with lead upto 50 meters. dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level: 1:4:8 1 cement : 4 coarse sand zone-iii : 8 graded stone aggregate 40mm nominal size provinding and laying in position machine batched and machine mixed design mix m-25 grade cement concrete for reinforced cement concrete work, using cement contant as per approve design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is:9103 to accelerate, retard setting of concrete, improve work ablity without impairing strength and durability as per direction of engineer -incharge compost shed 25 x 10 m earth work in excavation by mechanical means hydraulic excavator/ manual means over areas exceeding 30cm in depth, 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth lead upto 50m and lift upto 1.5m, as dir filling available excavated earth excluding rockin trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50m and lift upto 1.5m. supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level: 1:4:8 1 cement : 4 coarse sand zone-iii : 8 graded stone aggregate 40mm nominal size provinding and laying in position machine batched and machine mixed design mix m-25 grade cement concrete for reinforced cement concrete work, using cement contant as per approve design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is:9103 to accelerate, retard setting of concrete, improve work ablity without impairing strength and durability as per direction of engineer -incharge provinding and laying in position machine batched and machine mixed design mix m-25 grade cement concrete for reinforced cement concrete work, using cement contant as per approve design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is:9103 to accelerate, retard setting of concrete, improve work ablity without impairing strength and durability as per direction of engineer -incharge steel reinforcement for r.cc work including straightening, cutting bending, placing in position and binding all complete up to plinth level .thermo mechanically treated bars of grade fe-500d or more centering and shuttering including strutting, propping etc. and removal of form for all heights: foundations, footings, bases of columns, etc. for mass concrete columns, pillars, piers, abutments, posts and struts lintels, beams, plinth beam, gridders, bressumers and cantilevers brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in foundation and plinth in : cement mortar 1:6 1 cement : 6 coarse sand 52mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:41 cement :2coarse sand :4 graded stone aggegate 20 mm nominal size and top layer 12mm thick cement hardner consisting of mix 1:2 1 cment hardener mix :2 graded stone aggaricate 6 mm nominal size by volume, hardening compound mixed @ 2 liter per 50 kg of cement or as per manufacturers specifications. this includes cost of cement slurry, but excluding the cost of nosinf of steps etc complete. providing 12 mm cement plaster 1:6 with clean fine sand inner side stuctural steel work reveted, bolted or welded in built up section, trusses and framed work up, including cutting, hoisting fixing in position and applying a priming coat of approve steel primer all complete.

Central Government And Public Sector

TRN :19338728 | 10 Dec, 2020

Tender Value : 0

Pune - Maharashtra

Tender for supply of distribution switch enterprise layer-3, 16 port fixed 1g/10g sfp+ with modular uplink slot to support 8x1/10gig sfp/sfp+ ports or 2x40gig ports with support for rps, sdn ready 8 port 1g/10g sfp/sfp+ network module access switch type-1 layer 2 managed with 8 nos. rj45 10/100/1000 base-t ports and additional 2 nos. sfp and 2 nos. utp uplinks ports access switch type-2 layer 2 managed with 12 nos. rj45 10/100/1000 gigabit ethernet ports, and should have 2 x 1g copper and 2 x 1g sfp uplinks access switch type-3 layer 2 managed access switch with 24 nos. rj45 10/100/1000 gigabit ethernet ports, and the switch should have fixed 4 x 1g sfp uplinks access switch type-4 layer 2 managed access switch with 48 nos. rj45 10/100/1000 gigabit ethernet ports, and the switch should have fixed 4 x 1g sfp uplinks application server with 2 x 16 core cpu, ram 96bg, hdd - 8 x 1.2 tb nlsas, 2 x 500 gb ssd, raid 5/6/10 hwd controller, redundant power supply, 2 x 10gbps and 2 x 1gbps ethernet ports 1 g single mode, 10km distance sfp modul 1 g coper sfp modul 10 g single mode, 10km distance sfp+ modul 10 g multi mode, sfp+ modul 1 g coper sfp modul gigabit media converter sm ofc console cable 6ft with usb type a and mini-b o. f.cable 24f outdoor - armoured unitube sm - hdpe sheath o. f.cable 06f outdoor - armoured unitube sm - hdpe sheath patch cord lc-lc sm duplex length- 3m lc, sm pigtail, 1 m lc, sm, duplex adapters 24 port rack mount liu unloaded 1 x 6 sc adapter plates cat6 utp 23awg solid:305m cat-6 armored outdoor cable 305 mtr category 6 utp patch panel, 24 port unloaded category 6 utp patch panel, 24 port fully loaded jack cat 6 keystone utp - white, white for patch pannel jack cat 6 keystone utp - white field side cat6 utp 24awg patch cord:1m, plug 30u snagless cat6 utp 24awg patch cord:3m, plug 30u snagless face plate - single keystone jack, square back box for single, dual cat 5e/cat6/cat6a, square 9u 600 x 600 mm network rack wall mount for access locations 15u 600x 600mm network rack wall mount for access locations 17u 800 x 800mm floor standing for distribution locations hardware pkt 3kva online, 1p-1p, 42ah*6 number batteries for 30mins back up time ups 600va, 30 min backup 40 mm hdep pipe ofc route marker 50 mm gi pipe 1 casing caping / conduite 2 casing caping / conduite 1 flexible pipe 2 flexible pipe 40 mm hdep pipe laying charges chamber making charges ofc route marker fixing charges tar road cutting and resurfacing charges 50 mm gi pipe laying charges fiber cable laying charges fiber splicing soft digging and resurfacing charges hard digging and resurfacing charges 1 casing caping laying charges 2 casing caping laying charges 1 flexible pipe laying charges 2 flexible pipe laying charges cat 6 cable laying charges network rack fixing and dressing charges liu fixing and dressing charges patch pannel termination charges io box fixing and termination charges configuration of servers and integration with existing setup testing, commissioning, project management and documentation charges

State Government

TRN :19339567 | 29 Oct, 2020

Tender Value : 1.34 Lacs

Solapur - Maharashtra

Tender for providing led high mast light in bauddh samaj wasti at tarangfal supplying and erecting led flood light fitting of 120w, including lamp, with pf > 0.95, class ip 65 and above class ip 65 and above housing of pressure die cast alluminium alloy and heat sink extruded alluminium complete per specification no fg-odf2-9-16 supplying, erecting & marking dpmcb 6 a to 32 a b- series for lighting in provided distribution board as per specification no. sw-swr/mcb5-3-7 supplying & erecting crca sheet metal one way enclosuers suitable for d.p.m.c.b./ t.p.m.c.b./ f.p.m.c.b. complete erected on angle iorn frame. supplying, erecting & marking spmcb 6a to 32a, b- series for lighting in provided distribution board as per specification no. sw-swr/mcb5-3-3 supplying and erecting two pole power contactor 250v 12a for time switch complete erected on wooden block/provided box, with necessary materials4-4-2 supplying and erecting programmable digital almanac timer microcontroller based with real time clock to operate on derived switching “on” & switching “off” street light as per daily sunset and sunrise respectively automatically having 4 digit led continuous time display, relay output 230v / 10a with 10 hrs battery backup and manual over drive facility capable to drive different capacity contactors timer erected in ms box in an approved manner4-4-6 supply and erecting 9m clear height fixed type high mast top-100mm, bottom- 200mm with hexagonal/round bracket and foundation bolts suitable for max. 4nos floodlight fixtures on provided foundation as per specification no. oh-pl/opl excluding luminaries.8-3-8 providing & casting m- 20 cement concrete foundation suitable for 9m & 10m raising lowering high mast considering the safe soil bearing capacity at site as 10 t/sq m at 1.5 m depth including excavation and fixing provided nut bolts with the help of template as per design in an approved manner.-16-3-9 supplying & erecting mains with 2x2.5 sq.mm f.r copper pvc insulated wire laid in provided conduit/trunking/inside pole/bus bars or any other places. as per specification no: wg-ma/bw1-3-5 supplying pvc insulated pvc round sheathed 2.5 sq.mm 50 no. x 0.25 mm dia. 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kv1-3-30 supplying, erecting & terminating pvc armoured cable 2 core 10 sq mm aluminium conductor with continuous 5.48 sq mm 12 swg g.i. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specificat7-1-4 making trench in soft soil of suitable width and depth as per is for laying provided l.t cable up to 25 sq mm complete. as per specification no. cw-exn-ctr16-1-1 supplying and laying including excavation 50 mm outside dia. double wall corrugated pipes dwc of hdpe for enclosing cable below ground/road surface, to required depth complete.7-6-11 supplying & erecting g.i. pipe ‘a’ class 40 mm dia. erected for enclosing pvc armoured cable on wall/pole as per specification no. cw-plb/gp, para 4.2.1 & 4.2.2 chapter 17.57-6-2 supplying and erecting g.i. strip of required size used for earthing on wall and/or any other purpose with necessary gi clamps fixed on wall painted with bituminous paint in an approved manner with joint required. as per specification no ea-ep.9-2-3 supplying and erecting iron, sheet metal work consisting of crca sheets, various sections of iron, plates, chequered plates, rods, bars, ms pipes, etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority6-1-19 providing cement concrete for foundation or for concrete filling in 1:3:6 ratio with 20 to 25 mm. stone metal duly plastered with necessary curing for pole muffing or any other purposes.16-3-6 providing pipe type earthing with 40mm. dia. g.l. pipe or 20 mm dia. g.l. rod complete with all materials as per specification no. ea-ep9-1-4 add gst-

corporations/Associations/Others

TRN :19328965 | 02 Nov, 2020

Tender Value : 0

Saoner - Maharashtra

Tender for supply of electrical material- supplying pvc surface modular switch box with double mounting plate for 2 modules duly erected. supplying pvc surface modular switch box with double mounting plate for 4 modules duly erected. supplying pvc surface modular switch box with double mounting plate for 6 modules duly erected. supplying pvc surface modular switch box with double mounting plate for 8 modules duly erected. supplying pvc surface modular switch box withdouble mounting plate for 12 modules duly erected. supplying pvc surface modular switch box withdouble mounting plate for 16/18 modules duly erected. supplying pvc surface modular switch box with double mounting plate for 1 modules duly erected. supplying pvc surface modular switch box with double mounting plate for 3 modules duly erected. modular switch box with double mounting plate for 1 module complete duly erected modular switch box with double mounting plate for 2 module complete duly erected modular switch box with double mounting plate for 4 module duly erected modular switch box with double mounting plate for 6 module duly erected modular switch box with double mounting plate for 8 module duly erected modular switch box with double mounting plate for 12 module duly erected modular switch box with double mounting plate for 16 / 18 module duly erected pvc surface modular double mounting plate 6 modules pvc surface modular double mounting plate 8 modules complete pvc surface modular double mounting plate 12 modules complete. pvc surface modular double mounting plate 16/18 module modular type blanking plate one module, duly erected on provided plate & box. modular type blanking plat two module, duly erected on provided plate & box. one/two way piano type switch 6a. piano type switch 250 v 16a. modular type switch 6a / 10a modular type switch 16a modular type bell-push 6a /10a modular type bell-push with indicator 2 modules 6a / 10a modular type two way switch 6a / 10a modular type switch 16 / 20 a with indicator 3 pin plug socket 6a 3 pin plug socket 16a modular type 3 pin 6a multi sockets pin 6 / 16a multi socket plug socket 6 pin 6a and 16a with switch 16a plug socket 6 pin 6a and 16a with switch 16a plug socket 6a & 16a 6 pin with 16a switch combined with indicator lamp and fuse with gang box on wooden board. bell push on filled polypropylene board modular type d.p. switch 32a with indicator modular type indicator lamp modular type 6 / 16a fuse unit modular type electronic step regulator for fan modular type buzzer 220 / 250v spmcb 0.5a to 5a each 183 35 218 spmcb 6a to 32a, c-series spmcb 6a to 32a, b- series spmcb 40a to 63a c- series spmcb 40a to 63a, b- series spn mcb 6a to 32a, c- series spn mcb 6a to 32a, b- series spn mcb 40a, c-series spn mcb 40a, b-series spndb one pole for spmcb 1 no on iron/ gi frame spndb surface/flush mounted with 2 poles for incoming and 2poles for outgoing spmcbs on iron/ gi frame 6 to 32 a spmcb suitable to fix in 1 module of modular switch in provided box 16 to 32 a dpmcb suitable to fix in 2 module of modular switch in provided box dpmcb 40a to 63a, c- series dpmcb 40a to 63a, b- series dpmcb 6a to 32a, c- series dpmcb 6 a to 32 a b- series tpn mcb 6a to 32a, c- series tpn mcb 40a to 63a, c- series tpmcb 6 a to 32a tpmcb 40a to 63a fpmcb 6a to 32a fpmcb 40a to 63a porcelain base iron clad cut out 415v 16a double pole metal clad switch 240v, 16a double pole metal clad switch 240v, 32a double pole metal clad switch 240v, 63a triple pole metal clad switch 415v, 16a triple pole metal clad switch 415v, 32a triple pole metal clad switch 415v, 63a triple pole metal clad switch 415v, 100a triple pole metal clad rewireable fuseswitch 415v, 200a triple pole metal clad hc type rewireable fuse and switch 415v, 16a triple pole metal clad hc type rewireable fuse and switch 415, v 32a with neutral link triple pole metal clad hc type rewireable fuse and switch 415v, 63a with neutral link triple pole metal clad switch and fuse 415v, 100a with neutral link triple pole metal clad switch rewireable fuse 415v, 200a with neutral link tpndb of 36 poles/12 four pole metal clad on load change over switch 415v, 16a four pole metal clad on load change over switch 415v, 40a four pole metal clad on load change over switch 415v, 63a four pole metal clad on load change over switch 415v, 100a double pole isolator only switch version of miniature circuit breaker of 40a triple pole isolators only switch version of miniature circuit breaker of 40a triple pole isolators only switch version of miniature circuit breaker of 63a triple pole isolators only switch version of miniature circuit breaker of 100a four pole isolators only switch version of miniature circuit breakers of 40a four pole isolators only switch version of miniature circuit breakers of 63a supplying two pole power contactor 230 v, 12 a for time switch complete erected on provided wooden block/ box, with necessary materials. supplying two pole power contactor 230 v, 32 a for time switch complete erected on provided wooden block/ box, with necessary materials. supplying four pole power contactor 430 v, 16 a for time switch complete erected on provided wooden block/ box, with necessary materials. supplying four pole power contactor 430 v, 40 a for time switch complete erected on provided wooden block/ box, with necessary materials. supplying digital timer supplying 4 pole power contactor 63 a with coil voltage of 220/240 v suitable to operate on av voltage for dg set. supplying 4 pole power contactor 80-130a with coil voltage of 220/240 v suitable to operate on av voltage for dg set. supplying 4 pole power contactor 200a with coil voltage of 220/240 v suitable to operate on av voltage for dg set. iron clad cut out hc type 415v 100a iron clad cut out hc type 415v 200a d. o. l. starter suitable for 250v. single phase, 50 cycles with connected to supply upto 3 h.p. d.o.l. starter 400v. 3 phase, 50 cycles with connected to supply upto 7.5 h.p. d.o.l. starter 400v. 3 phase, 50 cycles with connected to supply for 7.5 hp to 10 h.p. relay range 13-21 amp d.o.l. starter 400v. 3 phase, 50 cycles with connected to supply for 7.5 hp to 10 h.p. relay range 28-42 amp fully automatic star/delta starter suitable for 12.5 h.p. to 15 h.p. for 3 phase squirrel cage motor fully automatic star/delta starter suitable for above 15 h.p. up to 25 h.p. squirrel cage motor fully automatic star/delta starter suitable for above 25 h.p. up to 35 h.p. squirrel cage motor upvc reinforced flexible conduit 20 mm in dia. complete upvc reinforced flexible conduit 25mm in dia. complete. hms pvc conduit 20 mm. dia. hms pvc conduit 20 mm dia. hms pvc conduit 25 mm. dia. hms pvc conduit 25 mm dia hms pvc conduit 32 mm dia. hms pvc conduit 32 mm dia. hms pvc conduit 20 mm dia. hms pvc conduit 25 mm dia hms pvc conduit 32 mm dia. pvc casing-ncapping of size 20 mm pvc casing-n-capping of size 25 mm pvc casing-ncapping of size 32 mm pvc casing-ncapping of size 40 mm rigid steel conduit 16 swg 20 mm dia steel conduit 16 swg - 20 mm. dia. rigid steel conduit 16 swg 25 mm dia. steel conduit 16 swg 25 mm. dia. rigid steel conduit 16 swg 32 mm dia. steel conduit 16 swg 32 mm. dia. upvc reinforced flexible conduit 31/32 mm in dia. complete upvc reinforced flexible conduit 38/40 mm in dia. complete. upvc reinforced flexible conduit 50 mm in dia. complete. pvc box trunking of size 50x16/20 mm. pvc box trunking of size 50x50 mm. pvc box trunking of size 75x50 mm. pvc box trunking of size 75x75 mm. pvc box trunking of size 100x50 mm. pvc slotted box trunking of size 25x25 mm. pvc slotted box trunking of size 45x30 mm pvc slotted box trunking of size 60x45 mm. pvc slotted box trunking of size 75x75 mm. pvc slotted box trunking of size 100x100 mm. supplying including excavation of suitable width & depth up to 90 cm 50 mm outside dia. double wall corrugated pipes dwc of hdpe for enclosing cable below ground/road surface, to required depth complete. supplying 75 mm outside dia. double wall corrugated pipes dwc of hdpe for enclosing cable below ground/road surface, to required depth complete. supplying gi pipe 20 mm dia b class with resin bonded flap rock wool/glass wool insulation, with necessary material as per specification no. esd-hwp/tgp supplying gi pipe 40 mm dia b class with resin bonded flap rock wool/glass wool insulation, with necessary material complete. specification no. esd-hwp/tgp making trench of suitable width and depth in hard murum / tar road / soft soil for laying provided lt cable up to and including 16 sq. mm complete supplying g.i. pipe ‘a’ class 25 mm dia. erected for enclosing xlpe armoured cable on wall/pole as per specification no. cb-ce supplying g.i. pipe ‘a’ class 40 mm dia. erected for enclosing xlpe armoured cable on wall/pole as per specification no. cb-ce supplying g.i. pipe ‘a’ class 50 mm dia. erected for enclosing xlpe armoured cable on wall/pole as per specification no. cb-ce 2x1.5 sq.mm f.r copper wire laid 2x1.5 sq.mm frlsh copper wire laid 2x2.5 sq.mm f.r copper wire laid 2x2.5 sq.mm frlsh copper wire laid 2x4 sq.mm f.r copper wire laid 2x4 sq.mm frlsh copper wire laid 2x6 sq.mm f.r copper wire laid 2x6 sq.mm frlsh coppe wire laid 2x10 sq.mm f.r copper wire laid 2x10 sq.mm frlsh copper wire laid 3x2.5 sq.mm f.r copper wire laid 3x2.5 sq.mm frlhs copper wire laid 3x4 sq.mm fr copper wire laid 3x4 sq.mm frlsh copper wire armoured cable 3 core2.5 sq. mm. aluminium conductor armoured cable 3 core 4sq. mm. aluminium conductor armoured cable 3 core 6sq. mm. aluminium conductor armoured cable 3 core 10sq. mm. aluminium conductor armoured cable 3 core 16sq. mm. aluminium conductor armoured cable 3 core 25sq. mm. aluminium armoured cable 3 core 35sq. mm. aluminium conductor armoured cable 3 core 50sq. mm. aluminium conductor armoured cable 4 core 4sq. mm. aluminium conductor armoured cable 4 core 6sq. mm. aluminium conductor armoured cable 4 core 10sq. mm. aluminium conductor armoured cable 4 core 16sq. mm. aluminium conductor armoured cable 4 core 25sq. mm. aluminium conductor armoured cable 4 core 35sq. mm. aluminium conductor armoured cable 4 core 50sq. mm. aluminium conductor armoured cable 4 core 70sq. mm. aluminium conductor flat flexible 3 core 4 sq mm pvc sheathed submersible type copper cable flat flexible 3 core 6 sq mm pvc sheathed submersible type copper cable supplying aluminium stranded conductors 7/3.10 mm. complete. ant. 145.0 kg/km as per specification no. oh-con/aac supplying aluminium stranded conductors 7/2.21 mm complete. gnat 73.77kg/km as per specification no. oh-con/aac 70 sq. mm a .b. cable 90 sq. mm a .b. cable 24 sq. mm .service wire 26 sq. mm .service wire suspention clamp for ab cable lt distribution box street light wall bracket made from 25 mm. dia =b‘ class g.i. pipe 1.2 m in total length street light wall bracket made from 40 mm. dia =b‘ class g.i. pipe 1.2 m in total length street light bracket for erection of side entry fitting on pole with 25 mm. dia. =b‘ grade g.i. pipe 3w, 230v integral type led lamp 5w-7w, 230v integral type led lamp 10-12w, 230v integral type led lamp 14w, 230v integral type led lamp suitable 18w, 230v integral type led lamp suitable led square / circular 5 to 8w led square / circular 9 to 12w led square / circular 13 to 15w led square / circular 16 to 20w square shaped led panel light for upto 8 w square shaped led panel light suitable for 9 w - 12 w. square / round shaped led panel light suitable for 13w to18w led panel light square / round shape suitable for 19 to 24 w square / rectangular shaped led panel light suitable for 25 to 32w square shaped g led panel light 600x600mm suitable for 36 w-40w rectangular shaped led panel 300x1200mm of suitable for 36 to 40 w t8 fluorescent tube day light 1200mm 36w t5 14 w energy efficient fluorescent tube. t5 24 w energy efficient fluorescent tube. t5 28 w energy efficient fluorescent tube. pigmy /candle lamp led 18w to 20w tube light fitting 4 feet led street light fitting 12 to 18 w led street light fitting for 20 to 25w led street light fitting for 26 to 36w led street light fitting for 40 to 48w led street light fitting for 60 w led street light fitting for 70 to 75w led street light fitting for 75 to 90 w led street light fitting for 100 w led street light fitting for 120 w led street light fitting for 150 w led street light fitting 100w led street light fitting 120 w led street light fitting 150 w led flood light fitting of 30-40w led flood light fitting of 50w led flood light fitting of 70- 80w led flood light fitting of 90-100w led flood light fitting of 120w led flood light fitting of 150w led flood light fitting of 200w electronic type driver for outdoor led fittings upto 25w electronic type driver for outdoor led fittings upto 26w-45w electronic type driver for outdoor led fittings upto 46w-75w electronic type driver for outdoor led fittings upto 76w-100w electronic type driver for outdoor led fittings upto 101w-150w electronic type protector for outdoor led fittings upto 25w-150w electronic type pbc for outdoor led fittings upto 26w-45w electronic type pcb for outdoor led fittings upto 46w-75w electronic type pcb for outdoor led fittings upto 76w-100w electronic type pcb for outdoor led fittings upto 101w-150w electronic ballast, pf > 0.9 or transformer suitable for t5 lamp upto 28w electronic ballast, pf > 0.9 or transformer suitable for ftl upto 40w t8 fluorescent tube day light 600mm 18 w t8 fluorescent tube day light 1200mm 36w t5 14 w energy efficient fluorescent tube. t5 24 w energy efficient fluorescent tube. t5 28 w energy efficient fluorescent tube. pigmy /candle lamp ultra violet storage type water purifier ro+uv+uf with of 8w capacity output of purified water 7 to 8 litre/min ultra violet water purifier of 8w capacity, with output of purified water 2 litre/min. single phase ac supply. ceiling rose / batten holder / 6a. lamp holder 230 v.a.c. supply. supplying street light bracket made from 25 mm. dia =b‘ class g.i. pipe, 0.6 m in length street light bracket made from 40 mm. dia =b‘ class g.i. pipe, 0.6m. in length evaporative air cooler desert cooler with 18 exhaust fan. air desert cooler with normal cooling capacity of 50 cu.m per minute, with 12 exhaust supplying and erectin cassette type split room air conditioning unit 1.5 tr having iseer minimum 4.50 suitable for capacity 230/250 v, 50 cycles, ac supply having 1 no. air handling unit false ceiling mounting type complete with refrigerant r32/r410a and copper condenser coil at position with provided copper piping and drainage pipe. supplying and erectin cassette type variable speed inverter technology split room airconditioning unit 2 tr capacity having iseer minimum 3.50 to maximum 3.99 suitable to operate on 230/250 v, 50 cycles, ac supply having 1 no. air handling unit false ceiling mounting type complete with refrigerant r32/r410a and copper condenser coil at position as per specification with provided copper piping and drainage pipe. supplying and erectin cassette type variable speed inverter technology split room air conditioning unit 3 tr capacity having iseer maximum 4.50, suitable to operate on 230v /415 v, 50 cycles, ac supply having 1 no. air handling unit false ceiling mounting type complete with refrigerant r32/r410a & copper condenser coil at position with provided copper piping and drainage pipe. supplying and erectin cassette type split type variable speed inverter technology room airconditioning unit 3.5 tr capacity 230/250 v, 50 cycles, ac supply having 1 no. air handling unit false ceiling mounting type complete with refrigerant r32/r410a & copper condenser coil at position with provided copper piping and drainage pipe. exhaust fan of light duty 250 v a.c. 50 cycles 300mm.1400 rpm exhaust fan of light duty250 v a.c. 50 cycles 225mm. 1400 rpm exhaust fan medium duty 230 v a.c. 50 cycles 225 mm.1400 rpm exhaust fan heavy duty 230 v, a.c. 50cycles 375/380 mm. 900 rpm exhaust fan heavy duty 230 v a.c. 50 cycles 375/380 mm. 1400rpm exhaust fan heavy duty 230 v a.c. 50cycles 450 mm. 1400 rpm wall fan 400 mm regular ceiling fan of 1200 mm. regular ceiling fan of1400mm. condenser 2.5 micro farad for ceiling fan on line ups pure sine wave of 1 kva capacity complete with standard features, along with necessary smf batteries for 30 mins. battery backup 12 v/80ah to 88 ah tubular battery with battery terminal wire, duly charged complete 12 v/100ah tubular battery with battery terminal wire supplying and erectin rolled steel joist girder pole 175 x 85 mm 19.6 kg/m with supplying and erectin rolled steel joist girder pole 125 x 70 mm 13.3 kg/m with supplying and erectin isi mark g.i. pipe pole ‘b’ grade 80 mm dia 6 m long with pole cap, base plate in provided foundation as per specification no. oh-pl/gip supplying and erectin m.s. pipe pole ‘b’ grade 80 mm dia 6 m long with pole cap, base plate in provided foundation as per specification no. oh-pl/gip shackle type lt medium insulator 75x115 mm dia. with g.i. shackle strips, nuts and bolts, complete. shackle type lt medium insulator 50 x 89 mm dia. with g.i. shackle strips, nuts and bolts, complete. supplying and erectin g.i. stay set for poles, including loop insulators at inaccessible height complete with anchor plate 300 x 300 x 6 mm., straining screws, g.i. stay wire 7/8 swg, g.l.stay rod 20 mm x 1.8 m length and pole clamps duly erected d? type pole clamps, fabricated from 50 x 6 mm ms flat with 15 mm dia. supplying and erectin 5 m high clear height galvanised octagonal pole with foundation bolts supplying and erectin 6 m high clear height galvanised octagonal pole with foundation bolts supplying and erectin 8 m high clear height galvanised octagonal pole with foundation bolts supplying and erectin 9 m high clear height galvanised octagonal pole with foundation bolts supplying and erectin 6 m high galvanised conical pole with foundation bolts supplying and erectin 8 m high galvanised conical pole with foundation bolts supplying and erectin 9 m high galvanised conical pole with foundation bolts supplying and erectin 12 m high galvanised conical pole with foundation bolts supplying and erectin galvanised 1000mm single arm sword type bracket with frp dome and ball supplying and erectin galvanised 1000mm double arm sword type bracket with frp dome and ball supplying and erectin 9m clear height fixed type high mast top-100mm, bottom- 200mm with hexagonal/round bracket and foundation bolts suitable for max. 4 nos floodlight fixtures on provided foundation as per specification no. oh-pl/opl excluding luminaries. supplying and erectin12.5m clear height fixed type high mast top-110mm, bottom- 242 mm with hexagonal/round bracket and foundation bolts suitable for max. 6 nos floodlight fixtures on provided foundation as per specification no.oh-pl/opl excluding luminaries. making cement concrete foundation for 6 m pole making cement concrete foundation above 6 m to 9 m poles making cement concrete foundation for above 9 m poles making cement concrete foundation for stay making cement concrete foundation pole muffing making m- 20 grade reinforced cement concrete foundation complete for 3 to 5m octagonal / conical gi pole. making m- 20 grade reinforced cement concrete foundation complete for 6m to 8m high octagonal /conical gi pole. making m- 20 grade reinforced cement concrete foundation complete for 9m & 10m high octagonal /conical gi pole. making m- 20 cement concrete foundation complete for 12.5 m raising lowering high mast. providing pipe type earthing with 40mm. dia. g.l. pipe or 20 mm dia. g.l. rod supplying and erecting outdoor stand mounted feeder pillar for highmast of the same manufacturer with 32a tpn mcb incomer, single dial timer switch, 25a tp contactor for automatic switching of luminaries, 2 nos 9a contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables erected in min. 14 swg crca sheet box with supporting angles, self-lock, gasket and slanting top erected with cc foundation complete. supplying iron, sheet metal work consisting of crca sheets, various sections of iron, plates, chequered plates, rods, bars, ms pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. supplying self-locking arrangement with keys in duplicate, made of brass duly erected, flush with surface of panel / cupboard. supplying slotted angles, frames etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority supplying bus bar chamber triple pole with neutral with four aluminium bars, 500v, 100a complete as per specification no. cp-bb supplying bus bar chamber triple pole with neutral with four aluminium bars, 500v 200a complete as per specification no. cp-bb supplying electrolyte copper flexible braided bus patti or bar in bus bar chamber/in panel or any other purpose, suitable for 500 volt with require capacity with 99.9% copper purity with fixing arrangement like lug or bottle type lug to both the end with high grade polyolefin insulation sleeve complete as per specification no. bcp-bb supplying hylam sheet/ ebonite sheet 3 mm thick for covering wall entries including cutting, drilling and fixing with nut bolts / screws etc. complete. supplying hylam sheet/ ebonite 6 mm thick for covering wall entries including cutting, drilling and fixing with nut bolts / screws etc. complete. supplying plywood 12 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete. supplying mains with isi mark wp 2 x 2.5 sq. mm. 1100 v grade aluminium pvc insulated and pvc sheathed wires on g.i. bearer wire no. 8 swg complete erected with required size of porcelain reel insulators and 16 swg g.i. binding wire. labour charges for internal wiring of fider piller/ panel. 3 terminal earth resistance tester tong tester l n key set

State Government

TRN :19312679 | 27 Oct, 2020

Tender Value : 0

Pune - Maharashtra

Tender for supply of electrical material - ¾ modimake casing capping patti white 1” modimake casing capping patti white 10 sq mm armoured cable lugal/cu 100 wclear lamp philips or isi mark 15 amp 3 pin socket khosla mark 16 sqmm/armoured al/cu, 4core cable isi mark 16/25 sq mm armoured cable lug al/cu 2 pin plug socket 5 amp anchor 25 /10 sqmm armoured 4 core al/cu cable bharat/isi mark 200 wclear lamp philips or isi mark 3 hp washing machine moter as per sample isi mark4g / samsung 3 pin socket 5ampanchor/isi mark15amp 3/16” rock drill bitstd mark 35sqmm/armoured al/cu, 4core cable isi mark 40/36 flexible wire finolex 40w starterphilips or isi mark 440 volts 3 phase busbar panel with neutral link 100/200/300amp 440 volts 3 phase busbar panel with neutral link 63amp 5a bedswitch anchore/isi mark 5a, 2pin tube light adapater anchore/isi mark 8 no rawal punch std mark above l&t make motor starter relay 6, 8, 10, 14 amp ahuja make cordless mike ahuja make driver unit ahuja make mike with cord ahuja make mike cord ahuja make speaker angle holder anchor/isi mark street light led fitting 120 watt battem holder anchor/isi/ mark bell push button ceiling rows celling fan 36” 900 morient/ crompton mark celling fan 48”1200morient/ crompton mark celling fan 56” 1400morient/ crompton mark led bulb 5 w/8w/12w/18w/40w change over switch 440 volts, 200amp isi mark clamp isi mark multi meter combine switch 5 amp khosla make isi mark compressar air comp 75hp, 3 phase, 440 v, 50 hz isi mark compressar water pump 5hp, three phase air compresser, 440 v, 50 hz isi mark condenser for moter 100 mfd/150 mfd condenser for moter 33 mfd condenser for moter 50 mfd contanctor, coil 230v ac 9a cordless mike cell ding dong bell std mark disel generating set slternator of 15 kva output continous rating, 3 phase, 415 volts, 50 c/s 08 pf ac a totally enclosed air cooled multy cylinder disel engine developing suitable bhp at 1500 rpm with 10 % overload for 1 hour in 24 hours with standard accessories isi mark disel generating set slternator of 40 kva output continous rating, 3 phase, 415 volts, 50 c/s 08 pf ac a totally enclosed air cooled multy cylinder disel engine developing suitable bhp at 1500 rpm with 10 % overload for 1 hour in 24 hours with standard accessories isi mark disel generating set slternator of 75 kva output continous rating, 3 phase, 415 volts, 50 c/s 08 pf ac a totally enclosed air cooled multy cylinder disel engine developing suitable bhp at 1500 rpm with 10 % overload for 1 hour in 24 hours with standard accessories isi mark double pole switch 16 amp, dp 230 v crompton/isi mark double pole switch 32 amp, dp 230 v crompton/isi mark drill machine brush bosch make as per m/c 15 hp 63 amp realy range 13 to 25 elbow, two way, three way, four way ¾”&1” electric welding cable 30guage, 2250 stands, 600amp cloth & rubber cover isi mark exhaust fan 16’’, 6’’, 24’’, 18’’mmalmarerao/khaitan/isi mark exhaust fan 300mm to 450 mm almarerao/khaitan/isi mark fan condensor 25mfdisi mark fan condensor 35mfdisi mark fan regulator transformer & step dimmertype/hduty crompton/isi mark fasner hook five in one combined 15amp, sscombined anchor/isi mark flexible cable for welding machine 140 stands 3 core isi mark flexible cable for welding machine 140 stands 4 core isi mark flexible pipe1/4”greay/stander mark flexible pipe1”greay/stander mark flexible wire twin white for tube light connection only 40/36 gi wire 6mm &10mm grinder single phase, 230 v 50 hz isi make grinder three phase, 440 volts, 50 hz isi make hrc fuse square type, fuse link 200 amp, 440 v isi hrc fuse square type, fuse link 400 amp, 440 v isi handgloves 440 volt isi mark hdmi cable finolex isi mark heavy duty screw driver, tapariamake, 150 mm/250 mm hot tape insulation isi mark house type switch 5 amp khosala make brown isi mark ictp three phase main switch 100 amp 440 volt, 50hz stanely/samrat/isi mark ictp three phase main switch 200 amp 440 volt, 50hz stanely/samrat/isi mark ictp three phase main switch 32 amp 440 volt, 50hz stanely/samrat/isi mark ictp three phase main switch 63 amp 440 volt, 50hz stanely/samrat/isi mark indicating lamp isi mark insulation tape pvc steel grip bhor or isi make3/4” inverter 10kva single phase microtake make/stdisi mark kit 1kat fuse with base & top 100amp isi mark kit kat fuse with base & top 16amp isi mark kit kat fuse with base & top 200amp isi mark kit kat fuse with base & top 300amp isi mark kit kat fuse with base & top 32amp isi make kit kat fuse with base & top 63amp isi make kpt hammering head drill machine 10 mm, 230 volt l&t make motor starter isi make 45-900amp l&t make motor starter isi mark 9-14amp ltlk motor starter contactor spear part kit mk-1 mark 440 volt ltlk motor starter nvc coil mk-1 mark 440 volt led type street light set 20/30/100w isi mark line tester tapariya main incomer switch/mcb 32a/63 a, 3phase, 440v mcb with metal enclosure box 10a/20a/32a ds/anchor/indokopp make or isi mark mcb with metal enclosure box 16a ds/anchor/indokopp make or isi mark mcb with metal enclosure box 20a/32amp /63amp ds/anchore /indokopp mark mcb-3 pole 20a 32 amp megger/earthing tester unit isi mark 440 volt monoblack water pump 15hp, three phase 440 volts, 50 hz isi mark monoblock water pump 5hp three phase 440 volts, 50 hz isi mark monoblock water pump 75hp three phase 440 volts, 50 hz isi mark motor protection circuit breaker mpcb amp to 30 amp multimeter out let plug top 20 amp/230v 2pole crompton/isi mark out let plug top 3 pole 20amp/440 v crompton/isi mark over load relay with spp 6-10a over load relay with spp as per sample pvc flexible wire 128 strand four core isi mark pvc flexible wire 128 strand, 3 core pvc industrial flexible wire 1/18” philco/finolex /isi mark1 sqm pvc industrial flexible wire 3/20” philco/finolex/isi mark 25 sqm pvc industrial flexible wire 7/20” philco/finolex /isi mark 4 sqm pvc two core wire 40/36 pvcthree core wire 40/36 p5 paralite louvers 2 ? 36 watt cfl havells panel board operatin rubber coating matisi mark pencil cell everyday pendent bulb holder anchor/isi mark piyano type switch 5 amp anchor or isi mark power cable-25 sqmm 19a pumps jet submersible 2hp single phase isi mark 230 v, 50 hz pump jet pump/submersible 1 hp single phase isi mark, 230 v, 50hz, 15 hp push button 10a isi mark pvc pipe ¾” garaware mark pvc pipe 1” garaware mark rawal plug box stdmake8 no-10 no revers-forward switch thakur shraff make 440 volt rock bit 12mm isi mark rock bit 6mm isi mark round type switch 15 amp khosla make isi mark sandle for above pipe ¾” 1’’ isi mark screw driver 200 mm conneeter type, taparia make screw hardware 15x8 stdmake screw hardware 25x8 stdmake screw hardware 35x8 stdmake screw hardware 60x8 stdmake screw hardware 75x8 stdmake service tar/metal wire 10sqmm service tar/metal wire 8sqmm service wire bundle 10sqmm twin isi mark service wire bundle 8 sqmm twin isi mark singal phase preventer 230 volt single phase 05/1/ 2hp tullu pump 230 volt 50 hurs pump isi mark open well water pump 5 hp socket round type 5 amp khosla make isi mark socket round type 5 amp khosla make isi mark solar power led lighting system set isi mark spike guard 230 volt 4/5 socket square box stdmake sunmica board, top sunmica 10x12 isi mark sunmica board, top sunmica 12x12 isi mark sunmica board, top sunmica 12x18 isi mark sunmica board, top sunmica 4x4 isi mark sunmica board, top sunmica 8x10 isi mark sunmica board, top sunmica6x8 isi mark sunmica board, topsunmica4x7 isi mark switch for above grinder three phase, 440 volts, 50 hz isi mark switch for abovegrinder single phase, 230 v 50 hz isi mark table fan crompton/sini/isi mark table fan blades, as per size crompton/sini/isi mark terminals three phase preventer 440 volt three pin plug & socket single phase 230 volt 20amp isi mark three pin plug & socket single phase 415 volt 20amp isi mark tube light 4 ft-40watt philips/crompton or isi mark tube light 4ft-40w industrial fitting isi make with tube light, choke, starter, etc led tube set complite tube light holder side patty type sinsi mark tubes light choke 40 w240v copper/ al philips/crompton or isi mark & electronic choke two pin unbrekeble 5a isi mark wall fan sini/isi make 16”/24’’/450 mm welding m/c socket 20 amp 230 volt &20 amp 440 volt isi or any standard make only crompton greves makes white warm tube light & cfl isi mark wire cutting plier 8 mm taparia mark wire multi gauge 15 sq mm 2 sq mm 25 mm/41mm wooden board 12x12 std make wooden board 8x10 std make wooden board 8x6 std make stand fan isi make 24” industrial walk fan almonard 36” industrial stand fan almonard 36” mcb 1 pole with box isi make 32 amp electric tool box all set crimping tools all set hydrolic earthing plate 6 x 6 earthing plate 12 x 12 salt coal amplifire machine 120 w ahuja make with pendrive inspection lamp industrial star delta stater l & t 15 hp for motor ss combimne box ancher flood light led 120 watt

Central Government/Public Sector

TRN :19338823 | 31 Oct, 2020

Tender Value : 2.50 Lacs

Tezpur - Assam

Tender for supply of fuel filter, switch oil pressure sensor, self stareter assy, crank shaft front, oil filer, gasket engine oil sump, oil seal fly wheel end, ring gear, filter cartridge, belt, gasket cylinder head, primary element, secondary element, nut hex fl, fan blade, clutch cover assy, reverse switch, tierod end rh, grease seal hub.

Central Government/Public Sector

TRN :19331437 | 29 Oct, 2020

Tender Value : 0

Pune - Maharashtra

Tender for tender for allotment of temporary stalls for sale of crackers and fire works during ensuing dassera diwali festivals at golibar maidan

Central Government And Public Sector

TRN :19318228 | 18 Nov, 2020

Tender Value : 0

Avadi - Tamil Nadu

Tender for supply of flares cartridge belt assy/172.91.273cbcb

Central Government/Public Sector

TRN :19273172 | 06 Nov, 2020

Tender Value : 2.30 Lacs

Vadodara - Gujarat

Tender for e -tender invited for procurement of green bomb fire-crackers for scaring of wild life from operational area

Related Keywords : armour panel

List of latest armour-panel Tenders in Indian Tenders. Click on any armour-panel Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for armour-panel Tenders.

Tender for tender for allotment of temporary stalls for sale of crackers and fire works during ensuing dassera diwali festivals at golibar maidan

Tender for supply of flares cartridge belt assy/172.91.273cbcb

Tender for e -tender invited for procurement of green bomb fire-crackers for scaring of wild life from operational area

Get armour panel Tender Alert...

Related Keywords : armour panel

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us