Filters

List of app-sheet Tenders

List of latest app-sheet Tenders in Indian Tenders. Click on any app-sheet Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for app-sheet Tenders.

All-Tenders (51)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35763827 | 10 Nov, 2025

Tender Value : 2.94 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at gups narayanpura - demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). random rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :cement mortar 1:6 ( 1-cement : 6-sand).cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." stone kharanja : random rubble dry stone kharanja under floor. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr

Central Government/Public Sector

TRN :35764670 | 21 Nov, 2025

Tender Value : 0

Silvassa - Dadra And Nagar Haveli

Tender for gem bids for confirm 2 70mm fleaxwear skin barrier floating withadhesive border 70 mm confirm 2 55mm lock drainablepouches lock n roll with filter 55 mm confirm 2 70mmlock drainable pouches lock n roll with filter 70 mm ostomy paste adapt paste ostomy powder adapt powder deo bottle 236 mladapt deodorant bottle remover sprayadapt adhesive remover spray gel of col1a1 gene withaminoglycoside class antibiotic 01percent col1a1 nongreasy odourless water soluble mixure of the repetitiousamino acid sequence organic highly refined scrleroproteinnano sized grind mixed mixture of col1a1 gene withaminoglycoside class antibiotic 01percent with freeze-drying technology advanced formulation ofcyclopentasiloxane 20percent worw ascrbyltetraisopalmitate 025percent high graded medical siliconesheet 2mm mixture of an anionic water-soluble derivativeof cellulose a linear polysaccharide reconstruct oxidizedcarbohydrate or polysaccharide consisting of 3000 or moreglucose single coated non woven 10mils medical attachingsheet mils with 800gmorsqm pouch of 2028floz with afilter fine enough to prevent high graded medical siliconesheet 2mm thickness consisting of silicon dioxide singlecoated non woven 10mils medical attaching sheet mils with800gmorsqmiec gamma sterile surgical powder freeunder gloces size60 gamma sterile surgical powder freeunder gloces size65 gamma sterile surgical powder freeunder gloces size70 gamma sterile surgical powder freeunder gloces size75 gamma sterile surgical powder freeunder gloces size80 gamma sterile surgical powder freegloces size60 gamma sterile surgical powder free glocessize65 gamma sterile surgical powder free glocessize70 gamma sterile surgical powder free glocessize75 gamma sterile surgical powder free gloces bid number gem2025b6840505 dated 30-10-2025 bid document1 126 1 1 size8.0, gamma sterile surgical powder free ortho glocessize6.0, gamma sterile surgical powder free ortho glocessize6.5, gamma sterile surgical powder free ortho glocessize7.0, gamma sterile surgical powder free ortho glocessize7.5, gamma sterile surgical powder free ortho glocessize8.0, single lumen pur umblical catheter fr4 l40cmext tube 5 cm with clampcm graduation 4 to 25 cmfrom distal tip ce certifiedfda approved, single lumenpur umblical catheter fr5 l40 cmext tube 5 cm withclampcm, double lumen polyurethan flexane cathetercvc line 3 fr l6cm or 10 cm, double lumen polyurethanflexane catheter 4.5 fr length 6 cmlumen 20g20g 1, xrotoracic trocar 8 no, xro toracic trocar 10 no, xro toracictrocar 12or14no l30, adaptor for thoracic to attached withdrainage, lisa catheter for surfactant delivery, bemiputemperature monitoring watch, cling wrap plastic 300 mtr, curafix i.v junior 4.3 x 5 cm, neo help baby cover plasticbag, ecg gel 250 mg, ecg paper roll 6208 80 mm x 20mtr, nst graph paper size 151mm x 90mm fm 9852 bpl, thermal printer roll abl 80011225mtr., tharmalpaper size a4 for ecg bpl9108, tharmal paper size a4 fortmt machine1packet 500 sheets, ultrasound gel250gm, blade set cresent side port keratome, cornisolcorneal storage media solution 20ml, dark goggles, enlarger blade 5mm, fibrinogen 70 mg thrombin 500 iuor1ml aprotinin 3000 kiu for ophthalmology, hydrophobicaspheric foldable lens, intraoccular lens 5 mm, intraoccular lens 6 mm, iso amyl 2cyano acrylatebioadhesive 0.25orml for ophthalmology, keratome 2.8mmslit blade for ophthalmology, posterier iris clawo lens, side port 15 degree lanctip blade for ophthalmology, ptosis sling silicon 75 x 25 mm, amniotic membrane, fogarty catheter vaseular size.6, ureteric catheter no.3, ureteric catheter no.4, ureteric catheter no.5, uretericcatheter no.6, tur set, 20 fr three way foleys, 22 frthree way foleys, turp drap, dj stand 5 fr 26 cm bothend open, pcnl drap, hydrophilic guide wire 0.035 inch, zebru guide wire0.035 inch blue and white twistey, nephrostomy tube 18fr, nephrostomy tube 20fr, nephrostomy tube 22fr, tcazo crafian dye 20 ml, amplantz sheath 22fr, tur 100p double strem, viu coldknife straight, collins knife shot, bluneem stone borketnitmol, triplony forceps for urs, triplony forceps forpcnl, endo clip applicator violet, hewostater clips violet, uretheral dilator set, ureteic dilator set, pcn set, malecot pcn tube, tissue separating dual layer meshpolyachide caprolactone polyprolene 15x15 cm, tissueseparating dual layer mesh polyachide caprolactonepolyprolene 10x15 cm, absorbable mesh fixation deviceprofound a mfp30a, non absorbable mesh fixation deviceprofound n mfd 30n, polypylene medium weight mesh15cm x 15 cm macroporous, haemmoroidal stappler, loopprolene, inj.normal saline 3ltr, sol.glycine 1.5percent 3ltr, dormia basket kit, toomy syringe 100 ml, paraffin wax 1kg, rotahaler device, double lumen endobronchial tube37 fr, double lumen endobronchial tube 35 fr, doublelumen endobronchial tube 32 fr, oxidized regeneratedcellulose rayon based topical absorbable hemostatstructured, lap or spinal or pcnl drape drape landr lapdrape mention below specseu ce markeden13795, csection drape set landr csection drape set mention belowspecseu ce markeden13795, baby drape landr tuveu cemarked en13795 approved with certified test, orthopaedicset landr drape set hip replacement kit //bid details2 / 126 ceisotuven13795, hip u drape landr drape set hipreplacement kiteu ce markeden13795, extremity setlandr extremity set knee replacement kit, shoulderarthroscopy drape landr shoulder arthroscopy set orthoprocedure kit, knee arthroscopy drape sheet landr kneearthroscopy drape sheet, tur drape set landr lap drapemention, cranio drape set landr cranio set mention, aami 2 gown landr special surgical gowns l, aami 2 gownlandr special surgical gowns xl, aami 3 gown landrspecial surgical gowns l, aami 3 gown landr specialsurgical gowns xl ceisotuven13795 marked aami, external drainage system sh024, cerebral catheterreservoir largesh012, cerebral catheter reservoirsmallsh013, bone marrow biopsy size 11g length10cm, bone marrow biopsy size 8g length11cm, lumbr peritonealshunt system with touhey needle bacterial resistanttubing, soda lime drager sorb 800 plus 5 ltr, needless ivsystem with closed lure access having selfsealing silicone, non ported i.v cannula with instaflash technology back cut, extension tube with pediatric endotoxin filter, polyurethane nutnisafe 4fn, polyurethane nutnisafe 5fn, polyurethane nutnisafe 6fn, polyurethane nutnisafe 8fn, yconnecton, baby pack 200 ml infant urine collectorpe, cather extension tube priming volume 150 ml length 25cm, extension tube with side port length 25 cm, lectroguard 150 cm, lectno spiral 100 cm, lectno spiral150 cm, posiflush prefilled 10ccconfirm 2 70mm fleaxwear skin barrier floating withadhesive border 70 mm, confirm 2 55mm lock drainablepouches lock n roll with filter 55 mm, confirm 2 70mmlock drainable pouches lock n roll with filter 70 mm, ostomy paste adapt paste, ostomy powder adaptpowder, deo bottle 236 mladapt deodorant bottle, remover spray adapt adhesive remover spray, gel ofcol1a1 gene with aminoglycoside class antibiotic 0.1% ., non greasy odourless water soluble mixure, organic highlyrefined scrleroprotein nano sized grind mixed, mixture ofcol1a1 gene with aminoglycoside class antibiotic 0.1%, advanced formulation of cyclopentasiloxane 20percent ww, high graded medical silicone sheet 2mm thicknessconsisting, mixture of an anionic water-soluble derivative ofcellulose a linear, reconstruct oxidized carbohydrate, orpolysaccharide, single coated non woven 10mils medicalattaching sheet mils with 800gm sqm.iec, single coatednon woven 10mils medical attaching sheet mils, pouch of20.28floz with a filter fine enough to prevent the passage ofgerm, high graded medical silicone sheet 2mm thickness, single coated non woven 10mils medical attaching sheetmils with 800gm sqm.iec, single coated non woven 10milsmedical attaching sheet mils, pouch of 20.28floz with afilter fine enough to prevent the passage of germ, gammasterile surgical powder free under gloces size-6.0, gammasterile surgical powder free under gloces size-6.5, gammasterile surgical powder free under gloces size-7.0, gammasterile surgical powder free under gloces size-7.5, gammasterile surgical powder free under gloces size-8.0, gammasterile surgical powder free gloces size-6.0, gamma sterilesurgical powder free gloces size-6.5, gamma sterilesurgical powder free gloces size-7.0, gamma sterilesurgical powder free gloces size-7.5, gamma sterilesurgical powder free gloces size-8.0, gamma sterilesurgical powder free ortho gloces size-6.0, gamma sterilesurgical powder free ortho gloces size-6.5, gamma sterilesurgical powder free ortho gloces size-7.0, gamma sterilesurgical powder free ortho gloces size-7.5, gamma sterile

Central Government/Public Sector

TRN :35764899 | 11 Nov, 2025

Tender Value : 10.14 Lacs

Ernakulam - Kerala

Tender for gem bids for adhesive flags paper colour four colour size 1 inch x 2 inch100 numbers sheets of each colour in a packet adhesiveflag plastic five colour size 05 inch x 2 inch 100 numbersheets of each colour in a packed attendance register longbest quality writing minimum white paper not less than 330x 210mm and 100 pages art line drawing pen 01 0305 07mm automatic air freshner refill binder clip 32mm12 clips in a packet binder clip 25mm 12 clips in a packet binder clip 19mm 12 clips in a packet blade 7 o clockpacket have 10 blades box file large size glass mediumset of 6 nos transparent 350 ml calculator ordinary 12digit cd mailer wallet type for cd dvd size 16cm x 13cm x1 cm good quality in a packed cd rewritable cd markerpen cd writeable cello packing tape brown size 2 inch 65mtr long cello tape transparent size 05 inch 65 mtr long cello tape transparent size 1 inch 65 mtr long cello tapetransparent size 2 inch 65 mtr long cello tape red of size05 inch 65 mtr long cello tape green size 05 inch 65 mtr cello tape blue size 05 inch 65 mtr long checking pencilscolour blue 10 nos in packet paper clips gem clips 35mmstainless steel u clips 200 pieces for holding loose papers paper clips gem clips 55mm stainless steel u clips 200pieces for holding loose papers glass surface cleaner 500ml correction fluid pen type cleaning duster cloth 450gsm white colour size 22 inch x 22 inch duster cloth for pc black dvd rw 47 gb disc 4 x speed dvd rewritable black recordable dvd 47 gb dak folder fuax leather withprinting office name and logo envelope cover green coloursize a4 with inner cloth envelope cover green colour sizelegal with inner cloth envelope cover green colour size 95inch x 45 inch envelope cover green colour size 12 inch x10 inch envelope cover green colour size 10 inch x 45inch envelope cover green colour size 105 inch x 15 inch bid number gem2025b6685507 dated 31-10-2025 bid document1 74 1 1 , envelope cover brown colour size 9 inch x 4 inch, envelope cover brown colour size 16 inch x 6 inch, envelope cover green colour size 16 inch x 6 inch, envelopecover green colour size 6 inch x 5 inch, envelope covergreen colour size 16 inch x 12 inch with cloth, envelopecover green colour size 18 inch x 14 inch with cloth, envelope cover white colour size 9.5 inch x 4.5 inch, erasernon dust big pack of 10 nos, royal executive bond papera4 size 90 gsm 500 sheets per ream, fevistick 15 grams, fevicol 100 grams, file cover white printed size 370mm x250mm alongwith mes logo printed on folder, file coverwhite alongwith mes logo printed on folder, file coverprinted size 370mm x 250mm alongwith mes logo printedon folder, l folder, paper clips gem pins u pins file clipsfor office multi colored packed of 100 nos, hand book plain100 pages, high lighter pen size 4 inch x 1 inch five coloursin each set, mouse pad, cd dvd ohp marker permanentall colour pack of 10 nos, paper pin t type size 20mmlength, 0.7mm dia, weight of packet not less than 50 gms, plain fax paper rolls, roll for panasonic replacement roll film70 mtr x 2 rolls, steel paper cutter blade 1 inch 18mmmetal grip hand-held paper cutter set of 10, steel papercutter 1 inch knife cutter good quality with 18mm blade withsteel body, paper punch hdp 1320 colour may vary in amake kangaroo, parcel cloth khadi white, paste in stickpad 3 colours florescent each colour not less than 40 sheetssize of sheets is 1.5 inch x 2 inch, paper weight, paste instick pad 3 colour florescent each colour not less less than40 sheets size of sheets is 3 inch x 3 inch, paste in stick pad3 colour florescent each colour not less less than 40 sheetssize of sheets is 4 inch x 4 inch, pen blue 10 nos in a packet, pen black 10 nos in a packet, pen red 10 nos in a packet, pen add gel point type fine and line size 0.5mm modelachiever blue colour, pen add gel point type fine and linesize 0.5mm model achiever black colour, pen add gel pointtype fine and line size 0.5mm model achiever red colour, pen hi tech point 0.5 luxor pilot v7 black colour cartridgetype, pen hi tech point 0.5 luxor pilot v7 blue colourcartridge type, pen hi tech point 0.5 luxor pilot v7 redcolour cartridge type, pen hi tech point 0.5 luxor pilot v7green colour cartridge type, pen butter flow ball pen0.7mm 10 pen in one packet, pen white board marker black, pen white board marker blue, pen white board markerred, pen stand for officers, pen stand, pencil apsara eachpacket consist of 10 pencils, drawing pencil b platinumeach packet consist of 10 pencils, battery 1.5v aaa size10.5mm dia, battery 1.5v aa size 10mm dia, pencilsharpener, pencil sharpener long point size approximately7 x 12 x 12 cm, stapler pin 24 x 6mm leg of length 6mm1000 nos stapes in each box, stapler pin 10mm 1000 nosstapes in each box, plotter paper 36 inch x 91 cm x 100mtr 80 gsm core size 3 inch 3 core, pocha cloth with mobstick scrotch brite, plotter paper 36 inch x 91 cm x 50 mtr80 gsm core size 3 inch 3 core, plotter tracing paper 36inch x 91 cm x 150 mtr 80 gsm core size 3 inch 3 core, poker wooden handle, refill for add gel pen blue colourpack of 20 refill, refill for add gel pen black colour pack of20 refill, ruled register long 1 qr best quality writingpaper minimum white paper not less than 330 x 210mmand 100 pages chlorine free paper including cover, ruledregister long 2 qr best quality writing paper minimumwhite paper not less than 330 x 210mm and 158 pageschlorine free paper including cover page, ruled registerlong 3 qr best quality writing paper minimum white paper //bid details2 / 74 not less than 330 x 210mm and 240 pages chlorine freepaper including cover page, ruled register long 4 qr bestquality writing paper minimum white paper not less than330 x 210mm and 320 pages chlorine free paper includingcover page, ruled register long 5 qr best quality writingpaper minimum white paper not less than 330 x 210mmand 380 pages chlorine free paper including cover page, room freshener 200 ml bottle, rotating isograph ink penthickness 0.3mm, rotating isograph and variant drawingink 23ml bottle black, tia crafts 12inch 30cm stainless steelruler scale long double side measuring tool for architectsengineers 12 inch, 30 cm, stainless steel, scissors size 6inch good quality, scissors size 12 inch good quality, sketch pen set 12 nos in packet with different colours, stamp pad, stamp pad ink, stapler hd 45, kangaro size10 mm, spiral roll all size, stapler large size ds12s 17, stick folder file a4, tag white cotton large, tag bestquality nylon large, tag small, towel for revolving chair big, tracing paper a3 size, tracing paper a4 size, traymedium size, twine jute nylon in a make, wall clock, photocopier paper a3 size 80 gsm superior quality, photocopier paper a4 size 80 gsm superior quality, photocopier paper legal size 80 gsm superior quality

Central Government/Public Sector

TRN :35765659 | 12 Nov, 2025

Tender Value : 1.44 Lacs

Bangalore - Karnataka

Tender for gem bids for almond, apple cider vineger, baking pdr, baking soda, basmati rice, besan, bisibele bhath masala pdr, blackbean sauce, black paper pdr, black paper whole, bluecuraco, bread crumbs, bundi, butter paper, corn flour, cajun masala, capers, cashew nut, cheese slice, chickpeas, chocolate sauce, cloves, cocktails sticks, coconut cream, cumin seed, custard pdr, foxtail millet, fresh cream, garlic, ghee, granadine syrup, greencardomom, green chilli sauce, honey, icing sugar, jaggery, jaiphal, jowar whole, kabuli chana, kashmiri redchili pdr, kesar, kewra water, khaskhas, lasagne sheets, macroni, mango juice, mayanoise, milk made, milk pdr, mint syrup, mix fruit td, mustard oil, mustard sauce, noodles, nutmeg, oats, olive black, olive green, oliveoil, orange crush, orange juice, oregeno, pasta noodles, penne fusilini pasta, peri peri sauce, phyllo sheets, pineapple crush, pineapple juice, pista, raisin, red chillipdr, red chilli sauce, rice vineger, dry rose mary, rosewater, sambhar masala, seasome oil, seasome seed, silver work, soda 750ml, soya sauce, spring roll sheets, sprite 750ml, strawberry crush, sundried tomato, sweetpeprika, tamarind, thyme, tomato juice, tomatoketchup, tomato pure, vanila essence, vanla ice cream, vermicelly, vineger, walnut, wc sauce, whipped cream, dry yeast, sweet corn fzn, bamboo shoots, green peasfzn, red cherry /bid number: gem/2025/b/6845587* /dated: 31-10-2025 & & / bid document1 / 70

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

State Government

TRN :35766126 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Dausa - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Central Government/Public Sector

TRN :35770160 | 12 Nov, 2025

Tender Value : 0

Imphal - Manipur

Tender for gem bids for led bulb 18w 220-240 volt led bulb 9w 220-240 volt ceiling fan 1200mm sweep with electronic regulatorconforming to is switch socket combination 6 amp 240vwith gang box isi marked switch socket combination 15amp 240v with gang box isi marked pedestal fan 400mmsweep wall mounted fan 300mm sweep conforming to is socket 3 oblique 6 pin 5 obliqu 15 amp 240v isi marked exhaust fan 300mm sweep conforming to is mcbdistribution box 8 way conforming to is 13032 mcb 20amp sp 240 volts angle holder bakelite isi marked concertina coil 1050mm dia hdpe sand bags of size14inch x 36inch weight not less than 60 gms led securitylifgt fitting 20 watts security light fittings for 65w led plywood commercial bwr grade isi marked of size 8ft x 4ftx 12mm thick bib cock fancy type 15mm long nozzle cpbrass mirror for gents of size 30inchx 15inch x5mm thick pvc connection pipe 15mm dia 450mm long with both sidenut and washer jet spray teflon tape 3 oblique 8 inchwide 10 mtr roll gun metal gate valve 25mm m painingbrush 100mm standard quality cp towel rail 600mm long20mm dia with bracket bricks sub class b old size bestlocally available minimum compressive strength 75 kgoblique sqcm water absorption not more than 20percentage app water proofing membrane 3 mm thick 1mwide 10 m long long angle iron picket of size 18 mtrlength of size 2inch x2inch laip pendent holder bakelite isimarked led batten surface 4ft long 18w output 1600lumen per watt with suitable powder coated frame endcape and connector swtich piano 6 amp 240v isi marked cp cast copper alloy bib cock long body 15mm bore cpshower rose 75mm dia with swivel arm 15mm bore squareoblique round shape mcb 10 amp sp with enclosure boxmild steel mcb 32 sp 240 volts mcb 40 amp sp 240 bid number gem2025b6848455 dated 01-11-2025 bid document1 63 0 0 volts, , mcb 63 dp 240 volts, , bulk head fitting in deepdrawn anodized aluminum body, epoxy powder coated andhead resistant prismatic glass cover with specially., waterdespencer 20 ltr make voltas, vitreous china pedestalpattern water closet european type ewc inclk pvc seat andcover, nylon rope 32mm, vitreous china wash hand basinof size 550mm x 400mm, pvc insulated sheathedunarmored cable 6sqmm twin core aluminum conductor isimarked with working voltage upto 1100 volt roll of 90 mtrs, flexible cable twin twisted roll of 90 mtr 23 oblique 0.0040, conforming to is, pvc sheathed unarmored strandedcopper conductor cable of size 1sqmm conforming to isimarked 90m roll, tripple layer hdpe water storage tankcylindrical vertical with closed top 1000ltrs capacityconforming to is specification, tripple layer hdpe waterstorage tank cylindrical vertical with closed top 500ltrscapacity conforming to is specification, 1 hp motor, nonskid ceramic colored tiles of size 600mm x 600mm x 9 to10mm thick, sheated unarmored stranded copperconductor cable of size 1.5sqmm conforming to isiconductor cable to size 1.5sqmm conforming to isi marked90m roll, flood light 200 watt, ppgi profiled sheet of size10ft x 3.5ft, 0.50mm thick, mild steel corrugatedgalvanized cgi sheet 8ft x 3ft, .63mm thick isi marked, ordinary portland cement 43 grade in hdpe bags of 50 kgseach, confirming to is 269-1976, m seal 100gm, pvcsheathed unarmoured stranded copper conductor cable ofsize 2.5sqmm conforming to isi marked 90m roll, pvcsheathed unarmoured stranded copper conductor cable ofsize 4sqmm conforming to isi marked 90m roll, thinner forpaint, tarpentin oil, paining brush 75mm standard quality, painting brush 50mm standard quality, coarse sanddimapur sand conforming to is 383 to1978., coarseaggregate crushed stone 20mm graded conforming to is383 to1979, plywood commercial bwr grade isi marked ofsize 8ft 4ft x 19mm thich, cp cast copper alloy stoop cock15 mm bore, mild steel hard drawn wire mesh 50 x 50mmpitch 3mm dia of wire, weight not less that 2.20 kg per, white cement, tirpolean plastic 30 x 30, tirpolean plastic24x18, pvc swr pipe 75m dia 3m long with socket end isimarked, pvc swr pipe 110m dia 3m long with socket endisi marked, pvc l bow 4 inch, pvc t 4 inch, pvc socket 4inch, pvc l bow 3 inch, pvc t 3 inch, pcv socket 3 inch, pixel bulk head fitting in deep drawn anodized minimumbody, epoxy powder coated and heat resistant prismaticglass cover with specially, change over switch 63 amp fourpole, change over switch 100 amp four pole, 25 ltr waterstrong geyser plastic body with all accessories forinstallation, pvc insulated sheathed unarmoured cable10sqmm twin core aluminium conductor isi marked withworking voltage upto 1100 volt roll of 90 mtr, insulationtape 3 oblique 8 inch wide 9 mtr roll, mild steel wire nailssorted size, gi binding wire 3mm dia, curtain rod mscp20mm dia 12ft long, bracket for curtain rod aluminiumpowder coated curtain rod in white colour 20 oblique 25mmdia, synthetic enamel paint high gloss superiour qualityblack colour, synthetic enamel paint high gloss superiourquality red colour, synthetic enamel paint high glosssuperiour quality yellow colour, synthetic enamel painthigh gloss superiour quality og colour, synthetic enamelpaint high gloss superiour quality white colour, plywoodcommercial bwr grade isi marked of size 6ft x 3ft x 12mmthick, cp cast copper alloy pillar cock 15mm, batten holderbakelite, vitreous china urinal pot bowl type including //bid details2 / 63 spreader, solvent cement for pvc pipe, distemper paintemulsion oblique acrylic distemper, pvc flexible ribbed pipe20mm dia

Central Government/Public Sector

TRN :35756641 | 21 Nov, 2025

Tender Value : 62.75 Lacs

Jaisalmer - Rajasthan

Tender for gem bids for local, adhesive incise drape 25 by 30cm adhesive incise drape 5by 15cm apparatus anaesthitic face mask with air cushiontransparent size 0 infant apparatus anaesthetic facemaskwith air cushion transparent size 1 paediatric apparatusanaesthetic face mask anitistatic with air cushiontransparent size 2 medium apparatus anaesthetic facemask antistatic with air cushion transparent size 3 adultwith valve apparatus anaesthetic face mask antistatic withair cushion transparent size 4 apparatus oxygen inhalationportable tubing 1 meter with connector for angiocath 15 gover the needle 4 and half inch catherer suctionendobronchial with terminal transparent non toxic pvctubing size fg 10 length 45 cm catherer suctionendobronchial with terminal transparent non toxic pvctubing size fg 12 length 50 cm catherer suctionendobronchial with terminal transparent non toxic pvctubing size fg 14 length 50 cm chest drainage system disposable gown disposable shoe cover ecg electrodesdisposable laryngoscope adult bulb for laryngoscopeinfant bulb for long iv line 15 g 100 cm long iv line 18g of 70 cm long iv line 18 g of 100 cm endotrachealtube with bronchial blocker 6 point 0 mm to 9 point 0 mm mapleson non rebreathing system bains circuit nasalcannula adult nasal cannula paediatric needle epiduralanaesthesia with luer lock fitting with styllet 15 g ss needle epidural anaesthesia with luer lock fitting with styllet18 g ss needle spinal anaesthesia with luer lock fittingwith styllet 25 g ss mask for nebulizer outfit venouspressure manometer complete paediatric anaestheticcircuit complete non-rebreathing system pressuremonitoring line 100 cm or 200cm male or female rapidinfusion set short ledercath 20g 8 to 10 cm long withintroducer needle and guide wire three way stop cock bid number gem2025b6822692 dated 31-10-2025 bid document1 134 1 1 plastic, triple lumen catherer kit cannula guide wiredilator introducer needle, tube rubber left and rightendotracheal intubation with 2 ballons and 2 pilot bags withsuction tube size large, tube endotracheal reinforced pvcsize 3 point 0 with out cuff, tube endotracheal reinforcedpvc size 3 point 5 with out cuff, tube endotrachealreinforced pvc size 4 point 0 with out cuff, tubeendotracheal armoured styllet for, tube endotrachealcatheter mount for, tube endotracheal nasal size 2 point 5without cuff, tube endotracheal nasal size 3 point 0 withoutcuff, tube endotracheal nasal size 3 point 5 without cuff, tube endotracheal nasal size 4 point 0 without cuff, tubeendotracheal nasal size 4 point 5 without cuff, tubeendotracheal nasal size 5 point 0 with cuff, tubeendotracheal nasal size 5 point 5 with cuff, tubeendotracheal nasal size 6 point 0 with cuff, tubeendotracheal nasal size 6 point 5 with cuff, tubeendotracheal nasal size 7 point 0 with cuff, tubeendotracheal nasal size 7 point 5 with cuff, tubeendotracheal nasal size 8 point 0 with cuff, tubeendotracheal oral with inflatable cuff tube and pilot bag 7point 5 mm internal diameter, tube endotrachealreinforced pvc size 7 point 5 with cuff, tube endotrachealreinforced pvc size 8 point 0 with cuff, tube tracheostomywith inflatable cuff size 35 fg, tube tracheostomy withinflatable cuff size 39 fg, laproscopic coliscytectomyprocedure drape sheet, foleys balloon catheter 2 waysilicon 16 g, foleys balloon catheter 2 way silicon 18 g, foleys balloon catheter 2 way silicon 20 g, foleys ballooncatheter silicon size 8 fr, hand gloves size 6 and half pairof, hand gloves size 7 pair of, knife bard parker blade size1 fitting commercial no 10 packet of 6, knife bard parkerblade size 1 fitting commercial no 11 packet of 6, knifebard parker blade size 1 fitting commercial no 12 packet of6, knife bard parker blade size 1 fitting commercial no 15packet of 6, knife bard parker blade size 2 fittingcommercial no 20 packet of 6, knife bard parker blade size2 fitting commercial no 22 packet of 6, knife bard parkerblade size 2 fitting commercial no 23 packet of 6, suctiondrain, syringe disposable plastic sterile 2 ml with needle, syringe disposable plastic sterile 5 ml with needle, syringedosposable plastic sterile 10 ml with needle, syringedisposable 20 ml, syringe disposable 50ml, strip indicatorsfor sterilisation control for testing sterility of drums, armband disposable tourniquet, percutaneous tracheostomy kitset complete with forceps or dilators and tracheostomy tube8 point 0 mm, clavicle brace small or medium or large, long knee brace large, long knee brace medium, kneecap elastic xl, knee cap elastic large, knee cap elasticmedium, knee cap elastic small, hinged knee brace withopen patella, flexible open patella knee brace large, flexible open patella knee brace medium, heel cup siliconor carbon copolymer, pelvic binder size m or l or s orxxl, lumbosacral belt support size s or m or l or xl orxxl, skin stapler remover, adhesive plaster zinc oxide 2point 5 cm by 1 mtr, adhesive plaster zinc oxide 7 point 5cm by 5 mtr, adhesive plaster micro porous tape 1 inch boxof 12, adhesive plaster micro porous tape 2 inches box of 6, adhesive plaster micro porous tape 3 inches box of 4, abdominal binder 10, bandage crepe 10 cm, bandagecrepe 15 cm, bandage open woven for plaster of paris10cmx5m, bandage open wove uncompressed 6 cm by 4metres, bandage open wove uncompressed 10 cm by 4metres, bandage plaster of paris 10 cm by 3 metres, //bid details2 / 134 / / 1 1 /item categorybandage plaster of paris 15 cm by 3 metres, bandage tshaped, bandage comfortable casting 7 point 5cm by 3point 6 cm, bandage comfortable casting 12 point 5cm by 3point 6 cm, bandage dvt stocking small, bandage dvtstocking medium, bandage dvt stocking large, cottonwool absorbent pkt of 500 gm, cotton wool non absorbentpkt of 500g, dressing medicated adhesive 25 cm by 6 cm ina single strip pack, dressing first aid unmedicated sterilepack, dressing medicated gauze paraffin 10 cm by 10 cmtin of 24, dressing, shell compressed, dressing woundcare occlusive and hydrocolloid dressing with flexible foampadding for optimum healing 10cm by 10cm box of 5, dressing wound care occlusive and hydrocolloid dressingwith flexible foam padding for optimum healing 20cm by20cm box of 3, dressing extra thin wound care 10cm by10cm box of 5, dressing extra thin wound care 20cm by20cm box of 3, preop adhesive drape 28 cm by 30 cm, dressing silicon gel sheet 5 inch by 4 point 5 inch, dressingwound care non adhesive 3 by 3 inches, dressing woundcare non adhesive 4 by 4 inches, dressing postopmedicated 6 by 7cm pack of 100 dressings flexigrid, dressing postop medicated 10 by 12 cm pack of 50dressings flexigrid, dressing wound 10 by 20 cm, dressingsterile 4 inch by 4 inch box of 5, dressing sterile 8 inch by 8inch box of 3, dressing collagen wound management size 2inch by 3 inch, dressing collagen wound management size8 inch by 14 inch, dressing collagen wound managementmaterial 5 ml, dressing collagen wound managementmaterial 15 ml, gauze absorbent folded 1 cm by 100metres, haemostatic gauze chitosan, pad abdominal swab25 by 25 cm with tape 30 cm, pad abdominal swab 40 by25 cm with tape 30 cm, suspensory scrotal, surgeons capsdisposable, surgeons mask disposable, haemostatic clipstitanium haemostatic clips extra large, haemostatic clipstitanium haemostatic clips large, haemostatic clipstitanium haemostatic clips medium, haemostatic clipstitanium haemostatic clips small, linear cutter reload unitblue cartidge for use with safety lock out 75mm, meshprosthesis for hernia small polypropylene mesh size 6 by 11cms composite light wt mesh of polypropylene andpolygalactin 910 polygycolic acid size 6 by 11 cms, monofilament polyglyconate synthetic absorbable suturesize 1 by 0 70 to 75 cm 1 by 2 circle taper cutting 20 to 30mm, monofilament polyglyconate synthetic absorbablesuture size 2 by 0 70 to 75 cm 1 by 2 circle taper cutting20 to 30 mm, monofilament polyglyconate syntheticabsorbable suture size 3 by 0 70 to 75 cm 1 by 2 circletaper cutting 20 to 30 mm, polyamide monofilament size 1by 0 100 cm 1 by 2 circle rb 40 mm, polyamidemonofilament size 2 by 0 70 to 80 cm 3 by 8 circle reservecutting 40 to 45 mm, polyamide monofilament size 3 by 070 to 80 cm 3 by 8 circle reverse cutting 25 to 30 mm, polyamide monofilament size 4 by 0 40 to 50 cm 3 by 8circle cutting 15 to 20 mm, polydioxanone size 1 150 cmsloop 1 by 2 circle rb needle 50 to 55 mm, polydioxanonesize 1 90 cms 1 by 2 circle needle 40 to 45 mm, polydioxanone size 1 by 0 70 to 75 cms 1 by 2 circle rb 40to 45 mm, polydioxanone size 4 by 0 70 to 75 cms 1 by 2circle rb needle 12 to 15 mm, polydioxanone size 5 by 070 to 75 cms 1 by 2 circle rb needle 12 to 15 mm, polyglicaprone size 3 by 0 70 to 75 cm 3 by 8 circle cutting20 to 25 mm, polyglicaprone size 4 by 0 70 to 75 cms 3 by8 circle reverse cutting 15 to 20 mm, polypropylene bluemonofilament 70 to 75 cm size 3 by 0 and 1 by 2 circle //bid details3 / 134 taper cut 25 mm double needle, polypropylene bluemonofilament 70 to 75 cm size 3 by 0 and 3 by 8 circlereverse cutting 12 mm, polypropylene blue monofilament70 to 75 cm size 4 by 0 and 3 by 8 circle rb, polypropyleneblue monofilament 70 to75 cm size 1 and 3 by 8 circlereverse cutting 12 mm, polypropylene blue monofilament70 to 75 cm size 1 by 0 and 3 by 8 circle reverse cutting 12mm, polypropylene blue monofilament 70 to75 cm size 4 to0 and 1 by 2 circle rb 13 mm double needle, polypropylene blue monofilament 70 to 75 cm size 4 by 0and 3 by 8 rb 12 mm, polypropylene blue monofilament 70to 75 cm size 5 point 0 3 by 8 rb 24 mm, polypropyleneblue monofilament 70 to 75 cm size 6 point 0 rb 26 mmneedle, polypropylene blue monofilament 70 to 75 cm size2 to 0 and 3 by 8 circle reverse cutting 12 mm, silkbraided size 1 by 0 70 to 76 cms taper cut 1 by 2 circleneedle 25mm, skin stappler with stainless steeel staples, synthetic absorbable polygalactin 910 rapid absorptionsize 2 by 0 and 80 to 90 cm circle cutting 30 to 40 mmdouble arm, synthetic absorbable polygalactin 910 orpolyglycolic acid coated with polycaprolate size 1by 0 and70 to 90 cms and 1 by 2 circle rb 20 to 25 mm, syntheticabsorbable polygalactin 910 or polyglycolic acid coatedwith polycaprolate size 2 by 0 and 70 to 90 cms and 1 by 2circle rb 30 to 40 mm, synthetic absorbable polygalactin910 or polyglycolic acid coated with polycaprolate size 3 by0 and 70 to 90 cms and 1 by 2 circle rb 20 to 25 mm, synthetic absorbable polygalactin 910 or polyglycolic acidcoated with polycaprolate size 4 by 0 and 70 to 90 cms and1 by 2 circle rb 16 to 20 mm, face mask 3 ply, tubefeeding smooth plastic infant 38 cm long 5 f with redflexible connector for nasogastric feeding, tube rectalflatus size 18 catheter gauge, urinary leg bag 540ml, nasogastric tube adult 100cm long 14g, naso gastric tube adult100cm long 16g, naso gastric tube adult 100cm long 18g, naso gastric tube adult 100cm long 20gadhesive incise drape 25x30cm, adhesive incise drape5x15cm, apparatus anaesthitic face mask with air cushiontransparent size 0 infant, apparatus anaesthetic facemaskwith air cushion transparent size 1paediatric, apparatusanaesthetic face mask anitistatic with air cushiontransparent size 2 medium, apparatus anaesthetic facemask antistatic with, air cushion transparent size 3 adultwith valve, apparatus anaesthetic face mask antistaticwith air cushion transparent size 4, apparatus oxygeninhalation portable tubing 1 meter with connector for, angiocath 15 g over the needle 4 1/2, catherer suctionendobronchial with terminal transparent non toxic pvctubing size fg 10, length 45 cm, catherer suctionendobronchial with terminal transparent non toxic pvctubing size fg 12 length 50 cm, catherer suctionendobronchial with terminal transparent non toxic pvctubing size fg 14 length 50 cm, chest drainage system, disposable gown, disposable shoe cover, ecg electrodesdisposable, laryngoscope adult bulb for, laryngoscopeinfant bulb for, long i v line 15 g 100 cm, long i v line 18g of 70 cm, long i v line 18 g of 100 cm, endotracheal tubewith bronchial blocker, 6.0 mm-9.0mm, mapleson nonrebreathing system bains circuit, nasal cannula adult, nasal cannula paediatric, needle epidural anaesthesia withluer lock fitting with styllet 15 g ss, needle epiduralanaesthesia with luer lock fitting with styllet 18 g ss, needle spinal anaesthesia with luer lock fitting with styllet25 g ss, mask for nebulizer, outfit venous pressuremanometer complete, paediatric anaesthetic circuitcomplete non-rebreathing system, pressure monitoring line //bid details4 / 134

State Government

TRN :35759701 | 06 Nov, 2025

Tender Value : 52.30 Lacs

New Delhi - Delhi

Tender for provision of exit gate, shading at stairs in front of skating rink, seepage rectification in tt hall, relaying of app sheet over trusses, repair of practice tennis wall, renovation of gym toilet at mdcsc, and gi link fencing at kalyan vihar mini maintenance of various sports complexes/golf courses a/r m/o of works at major dhyan chand sports complex, ashok vihar for the year 2025-26. sh- provision of exit gate, shading at stairs in front of skating rink, seepage rectification in tt hall

corporations/Associations/Others

TRN :35747339 | 17 Nov, 2025

Tender Value : 0

Multi Location - Multi State

Tender for supply of apparatus case half size made of ms sheet as per drawing no. sk-783-1/2 with latest alteration with e type lock to both front and rear door as per irs: s- 30/64 and rdso drawing no. sa-3473/m.

Related Searched Keywords : app sheet

List of app-sheet Tenders

Tender for supply of apparatus case half size made of ms sheet as per drawing no. sk-783-1/2 with latest alteration with e type lock to both front and rear door as per irs: s- 30/64 and rdso drawing no. sa-3473/m.

Get app sheet Tender Alert...

Related Searched Keywords : app sheet

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us