Filters

List of latest anodizing Tenders in Indian Tenders. Click on any anodizing Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for anodizing Tenders.

All-Tenders (7)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Corporations And Associations And Others

TRN :19281953 | 23 Oct, 2020

Tender Value : 9.03 Lacs

Malappuram - Kerala

Tender for material collection facility, 2.8.1 earth work in excavation by mechanical means hydraulic excavator /manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan, including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil 4.1.8 : providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size 60.7.1 : dry rubble masonry dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of departmental officers at site 7.1.1 : random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size up to plinth level with:cement mortar 1:6 1 cement : 6 coarse sand 50.6.7.1 : laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc. 5.1.2 : providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:1:5:3 1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size 50.6.7.2 : laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for super structure above plinth level up to floor two level including all cost of materials, labour charges etc. 50.6.1.2 : solid block masonry using pre cast solid blocks factory made of size 40x20x20cm or nearest available size confirming to is 2185 part i of 1979 for super structure up to floor two level thickness 20cm and above in: cm 1:6 1 cement: 6 coarse sand etc complete. 5.2.2 : reinforced cement concrete work in walls any thickness, including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size 5.3 : reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15⁰ landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 1 cement : 1.5 coarse sand zone iii : 3 graded stone aggregate 20 mm nominal size. 5.9.5 : centering and shuttering including strutting, etc. and removal of form for:lintels, beams, plinth beams, girders bressumers and cantilevers 5.22.6 : steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo - mechanically treated bars of grade fe-500d or more 50.10.1 : steel work in built up g i tubular round, square or rectangular hollow tubes etc. trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete od891474/2020 2021 : providing and fixing precoated galvanised iron profile sheets size, shape and pitch of corrugation as approved by engineer-in-charge 0.40 mm +0.05%, total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineer-in-charge. the sheet shall be fixed using self drilling/self tapping screws of size 5.5x55mm with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. data modified 12.50 9.48.1 : providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete.fixed to steel windows by welding 9.53 : providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size 13.1.1 : 12 mm cement plaster of mix:1:4 1 cement : 4 fine sand 10.5.1 : providing and fixing 1 mm thick m.s. sheet door with frame of 40x40x6 mm angle iron and 3 mm m.s. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.using m.s. angels 40x40x6 mm for diagonal braces 13.43.1 : applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:water thinnable cement primer 13.82.2 : wall painting with acrylic emulsion paint, having voc volatile organic compound content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour.two coats 11.3.1 : cement concrete flooring 1:2:4 1 cement : 2 coarse sand : 4 graded stone aggregatefinished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate 13.84.2 : painting with synthetic enamel paint, having voc volatile organic compound content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.two coats 50.9.15.2 : supplying and fixing 300 mm aluminium aldrop 16.68 : providing and laying 60 mm thick factory made cement concrete interlocking paver block of m - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer-in-charge.

State Government

TRN :19271099 | 22 Oct, 2020

Tender Value : 0

Shimla - Himachal Pradesh

Tender for supply of hot dip galvanized steel mild steel wire specification: mild steel wire for general engineering purpose hot dip galvanized finish in annealed condition confirming to is: 280-2006 with all latest amendments. the wire shall be hot dipped galvanized heavy coated, mass of zinc coating shall confirm to table 1 of is : 4826/1979 amdt. no. 1-3 first revision isi marked in m0201003005 5.00 mm.

Central Government/Public Sector

TRN :19272649 | 04 Nov, 2020

Tender Value : 0

Ajmer - Rajasthan

Tender for supply of galvanized steel stay tube 25 mm type-erw as per railway electrification drg. no.- re/33/p/2401 rev.- c & rdsos spec. no.- eti/ohe/11 5/89 rev. 1 & eti/ohe/134/84 with a & c slip no 1, 2, 3 & 4 length of tube 6 meter plus/minus 10cm, minimum average mass of zinc coating 610 g/m2 for lightly polluted area

Central Government/Public Sector

TRN :19260707 | 22 Oct, 2020

Tender Value : 0

Hubli - Karnataka

Tender for supply of prevailing torque type hexagon nut size m16x1.5 mm with non metallic insert polyamid to is:7002-2005, with property class-10 with zinc coating

Central Government/Public Sector

TRN :19264962 | 16 Nov, 2020

Tender Value : 0

Liluah - West Bengal

Tender for supply of kit of stainless steel bolts, screws, hex nut, csk screws & washer as per schedule consisting of 10 ten items :- .1 hex head bolt m 10 x 35 ss with nylock nut m10 ss.1 each . as per is: 1364 part 1 /2002 bolt, is 7002/91 nut, material to is: 1367 part 14 /84. qty per kit 16 nos. 2 csk hd. screw m 8 x60 with m 8 nylock nut & spring washer 1 each, as per is: 6761/94, black anodized, p-8.8 screw, is:7002- 1991 nut, is: 3063-1994spring washer .qty.per kit 32 nos. 3 plain washer m 12, is :2016/1967, type a, table 2, electroplated zinc coating, qty. per kit 28 nos.4 plain washer m 16, is :2016/1967, type a, table 2, electroplated zinc coating, qty. per kit 100 nos.5 plain washer m 20, is :2016/1967, type a, table 2, electroplated zinc coating, qty. per kit 20 nos.6 plain washer m 24, is :2016/1967, type a, table 2, electroplated zinc coating, qty. per kit 24 nos.7plain washer m 10, is :2016/1967, type a, table 2, electroplated zinc coating, qty. per kit 16 nos. 8 spring washer m 16, is: 3063/1994, table 1 a type b, electroplated zinc coating, qty per kit 24 nos. 9 machine washer dia 36.5 / 49.5 mm x 6 mm thick, is :2016/1967, table 1 electroplated zinc coating, qty per kit 16 nos. 10 hex nut m 30 ss, is 1364 part 3 1992, a2-70 qty. per kit 8 nos.

State Government

TRN :19249291 | 05 Nov, 2020

Tender Value : 53.47 Lacs

Jalpaiguri - West Bengal

Tender for supply 76 nos. of different materials supply of polythene sheet 150 gram per sqm. portland cement f stone aggregate single size :- 20 mm. nominal size. stone aggregate single size :- 10 mm. nominal size. stone aggregate below 40 mm. nominal size. rate inclusive of loading, unloading & stacking coarse sand. hire charges of shuttering plank 25 mm - 30 mm. thick with prop including all fittings. silver sand. medium sand. m.s. structural works in roof trusses with tubular sections conforming to is 806 - 1968 & is - 1161 - 1998 truss spanning upto 12.00 m. steel corrugated sheets with zinc coating not less than 275 gm / m2 galvanised steel bolts & nuts 6mm dia and 25 mm. long round head with slots. galvanised steel j or l hooks 8 mm. dia. g.i limpet washer bitumen washer galvanised sheet plain sheets seam bolts and nuts 6 mm dia and 25 mm long g.i. plain washer for seam bolts f bright finished black enameled mild steel butt hinges of size 75 x 47 x 1.70 mm. rabbit / chicken wire mesh. m.s. integrated grill for steel window and ventilator. display board for construction of poultry shed at different places within sukhani under rajganj panchyat samity.

Central Government/Public Sector

TRN :19224251 | 22 Oct, 2020

Tender Value : 0

Mangalore - Karnataka

Tender for procurement of protective coating materials on rate contract rc basis for two years.

Related Keywords : anodizing

List of latest anodizing Tenders in Indian Tenders. Click on any anodizing Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for anodizing Tenders.

Tender for supply of prevailing torque type hexagon nut size m16x1.5 mm with non metallic insert polyamid to is:7002-2005, with property class-10 with zinc coating

Tender for procurement of protective coating materials on rate contract rc basis for two years.

Get anodizing Tender Alert...

Related Keywords : anodizing

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us