Filters

List of latest aluminum-sliding-door Tenders in Indian Tenders. Click on any aluminum-sliding-door Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for aluminum-sliding-door Tenders.

All-Tenders (16)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government And Public Sector

TRN :19555307 | 19 Dec, 2020

Tender Value : 0

Port Blair - Andaman And Nicobar Islands

Tender for procurement of miscellaneous items- aluminum paneling for pre-existing concrete shelf with glass door & locking arrangement size 17 x 78 box covering for an equipment with aluminum frame, particle board and glass door with locking system size 1100x1400x2450 mm refurbishment of work station installation of aluminum partition shoe rack plywood with front rail made display door glass & fixed led lighting size 706 x 4x1.2 ft over head cabinet with sliding glass door size 2x7x1.2 ft display showcase made of 19 mm plywood size 1420x300x2150 mm with installation of lighting arrangement work station with locking arrangement size 3.6x1.10x2.6 ft installation of wooden filling cabinet modification of office space at various store houses and refurbishment of offices and stores at bvy pb

State Government

TRN :19551251 | 18 Dec, 2020

Tender Value : 0

Dhanbad - Jharkhand

Tender for supply of brick - 75a cold twisted bars hysd bars as per is:1786-2008 average rate corrosion resistant structural steel paint cement primer primer structural steel average rate tiles size 300 x 300 mm and 25 mm thick timber water based cement paint wooden ballies 2 dia for bracing wooden ballies 8 dia and 9 m long 9 m @ rs. 43.00/m wooden packing wooden staff for fastening of flag 25 mm dia, 1.0 m long a 75b brick b fly ash lime bricks falg brick conforming to is - 12894-1990 9 x 4.5 x 3 100 a at source c brick tiles 300mm x 150 mmx 50 mm d picket jhama brick ejhama khoa/metal fbangla bhattas brick of size 9 3/4 x 4 3/4 x 2 3/4 248 mm x121 mm x 70 mminclusive of royalty but exclusive of gst . 1 75 b 2 jhama bricks note :- in areas where bricks manufacture are of less size, the rate may be derived by reducing the rate in item 271d & f in proportion of the bricks rounding to nearest rs. 5.00 bricks bats at kiln site rough dressed stone boulder for masonry works. seasonel sal wood scantling sal planks : i 25 mm to 40 mm ii 12 mm to 20 mm teak wood : i scantling ii planks 25 mm to 40 mm iii planks 12 mm to 20 mm sisum wood i scantling ii planks 25 mm to 40 mm iii planks 12 mm to 20 mm seasoned gamhar wood scantling local local wood i scantling ii planks 25 mm to 40 mm iii planks 12 mm to 20 mm bamboo i 75 mm dia 6 m long to 8 m long ii 100 mm dia 6 m long to 8 m long iii 50 mm dia hill bamboo sal ballah post i 100 mm dia ii 125 mm dia iii 150 mm dia butt hinges as per clause 562 of building specification of building construction deptt. of size. i 75 mm ii 100 mm i teak ply 4 mm thick ii teak ply 6 mm thick ply wood national or equivalant make i 25 mm thick ii 19 mm thick iii 12 mm thick iv 6 mm thick orinary commercial ply i 3 mm thick ii 4 mm thick iii 6 mm thick isun mica best quality ii formica 1 mm barbed wire of 4 point, 2 ply 12 swg, 150 mm apart welded mesh 8 to 10 swg 100 to 125 mm square size c.a. sheet i corrugated 6 mm thick 1.5 m to 3.05 m long. ii a plain 6 mm thick 2.4 m to 3.05 m long b plain 4 mm -do- iii c.a. ridge, valley 1 m long plain wing adjustable iv corrugated adjustable ridge l-drop 16 mm dia 300 mm long as per 5.6.5 of building specification of bcd with screw and all fittings. i aluminum ii iron copper oxidized d-handle iron, proper oxidized as per clause 5.6.7 of building specification of b.c.d. i 150 mm long ii 125 mm long iii 100 mm long d-handle made of 16 mm wide and 6 mm thick aluminum flat. i 150 mm long and 10 mm dia ii 100 mm long and 10 mm dia aluminum pipe of 18 gauge i 12 mm dia ii 16 mm dia iii 20 mm dia iron nails i 125 mm and below ii above 125 mm iii glass clip of wire mild steel copper oxidized tower bolt as per clause 5.6.6 of building specification of b.c.d 10 mm dia, complete set. i 100 mm long ii 150 mm long iii 200 mm long iv 225 mm long v 300 mm long vi 450 mm long vii 600 mm long aluminum tower bolt as per clause 5.6.6 of buillding specification of b.c.d. top quality, 10 mm dia i 100 mm long ii 120 mm long iii 150 mm long iv 200 mm long v 225 mm long vi 300 mm long screw n.f i 75 mm size ii 60 mm size iii 50 mm size iv 40 mm size to 30 mm size v below 30 mm to 12 mm size varnish standard make sprit i primer for wood work ii primer for steel work shaliltex board for use as per expansion joint i.s. 1838-1938 filter i 25 mm thick ii 18 mm thick iii 12 mm thick shalitex primer double boiled llinseed oil a aluminum paint standard make b synthetic enamel isi mark plastic emulsion paint dry distemper oil bound distemper snowcem powder i cicko powder / inpermo waterproofing comp ii cicko liquid robin blue color for wash whitening putty blackening powder i 1st quality paint of different shades ii 2nd quality paint wax polish 1 lit 0.50 kg french polish standard make cotton ram raj shellex narial coir string narial rope 20 mm to 25 mm dia. sutli sabey string cotton string raniganj tiles ridge for above naria tiles 225 mm to 250 mm ridge for above or mungra narial rope above 25 mm dia thatching grass in bundle consisting of small & average length of grass 2.75 m bundle oxalic acid 1 lit. 1 kg iron clamp 460 mm x 40 mm x 6 mm rolling shutter 1.02 mm thick shalimar tarphelt bh type ii group - 1 a sun glass modi b plane glass panes i 2 mm thick ii 3 mm thick iii 4 mm thick iv 6 mm thick c pin hammered glass i 3 mm thick ii 4 mm thick iii 5 mm thick d 20 mm wide 4 mm thick glass strip for flooring hessian cloth 0.3 kg/ m2 cot. gunny best quality limpet washer bitumen washer plaster of peris g.i. hook 150 mm to 10 mm dia i 25 mm x 6 mm nuts & bolts ii 16 mm x 3.75 mm nuts & bolts iii 10 mm x 3.75 mm nuts & bolts i fly proof wire netting 18 gauge wire with 12-16 nos, mesh per m2 ii fly proof wire netting light gauge turpentine oil manson polish carborandum stones 4, 6, 8 & 10 nos lime rubbish slack coal grade - c steam long flame flush door hot pressed adhesive conforming to 2202 part - 1 i.s. i 25 mm thick a both side commercial b one side teak c both side teak ii 32 mm thick a both side commercial b one side teak c both side teak iii 38 mm thick a both side commercial b one side teak c both side teak a looking eye piece best quality fevicol / ktcat / vamicol boat spike 300-400 mm long kotah stone tiles 15 mm - 23 mm thick i 300 mm x 300 mm ii 375 mm x 375 mm iii 450 mm x 450 mm white makrana marble stone 20 mm thick i 300 mm x 300 mm and below ii 300 mm x 600 mm and above white glazed tiles 6 mm thick 150 x 150 mm size commercial grade colour ceramic wall/floor tiles as per is 13712 i 150 mm x 150 mm ii 300 mm x 300mm iii 300 mm x 450mm iv 300mm x 600mm dholpur tiles 15 mm x 23 mm thick i 275 mm x 275 mm to 300 mm x 600 mm ii 300 mm x 900 mm iii 600 mm x 1200 mm mosaic/tarrazo tiles 20 mm thick in ordinary cement base. mosaic / tarrazo tiles 20 mm thick in white cement base. slacked stone lime unslacked stone lime colour pigment for cement :- i red ii black iii green iv blue marble dust daltonganj marble chips i dehradoon ii daltanganj marble chips coloured daltonganj commercial particle board interior i 12 mm 600 mm x 600 mm size ii 25 mm 600 mm x 600 mm size particle board exterior 600 mm x 600 mm size i 12 mm ii 25 mm a 100 mm dia c.a. pipe b 100 mm dia c. bend paint synthetic enamel vitrified floor tiles of size 300x300x10mm thick with water absorption less then 0.08% and conforming to is 15622 of approved make in all colours and shades.parking tiles industrial tiles vitrified tiles tread of stairs of size 1200x300x15mm thick with water absorption less then 0.08% and conforming to is 15622of approved make in all colours and shades.size of tile 1200x300 mm for tread of stairs. double charged vitrified floor tiles of size 600x600mm thick with water absorption less then 0.08% and conforming to is 15622 /iso 13006 of approved make in all colours and shades. vitrified cool roof tiles of size 300x300x10mm thick with water absorption less then 0.08% and conforming to is 154557-2007/1501 3006 of approved make in all colours and shades. vitrified floor tiles of size 800x800mm with water absorption less then 0.08% and conforming to is 154557-2007/1501 3006 of approved make in all colours and shades. vitrified floor tiles of size 1000x1000mm with water absorption less then 0.08% and conforming to is 154557-2007/1501 3006 of approved make in all colours and shades. polysulphideporing grade ;density 1.65 gm/cc polymer modified cementation coating fibre glass cloth chequered tiles cement concrete base 300x300x25mm chequered tiles cement concrete base 300x300x40mm brass screws 30 mm plastic sleeves for screw chromium plated brass screws 40 mm chromium plated brass screws 30 mm chromium plated brass screws 25 mm chromium plated brass screws 20 mm bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm nickel plated bright finished mild steel piano hinges 1 mm thick 25 mm wide bright finished or black enameled mild steel screws 40 mm bright finished or black enameled mild steel screws 25 mm bright finished or black enameled mild steel screws 20 mm bright finished or black enameled mild steel bolts and nuts 50x6 mm oxidised mild steel butt hinges 125x65x2.12 mm oxidised mild steel butt hinges 100x58x1.90 mm oxidised mild steel butt hinges 75x47x1.70 mm oxidised mild steel butt hinges 50x37x1.50 mm oxidised mild steel parliamentary hinges 150x125x27x2.8 mm oxidised mild steel parliamentary hinges 125x125x27x2.8 mm oxidised mild steel parliamentary hinges 100x125x27x2.8 mm oxidised mild steel parliamentary hinges 75x100x20x2.24 mm oxidised mild steel sliding door bolt 300x16 mm oxidised mild steel sliding door bolt 250x16 mm oxidised mild steel tower bolt barrel type 250x10 mm oxidised mild steel tower bolt barrel type 200x10 mm oxidised mild steel tower bolt barrel type 150x10 mm oxidised mild steel tower bolt barrel type 100x10 mm oxidised mild steel handles 125 mm oxidised mild steel handles 100 mm oxidised mild steel handles 75 mm oxidised mild steel screws 50 mm oxidised mild steel screws 40 mm oxidised mild steel screws 30 mm oxidised mild steel screws 25 mm oxidised mild steel screws 20 mm anodised aluminium butt hinges 100x75x4 mm anodised aluminium butt hinges 75x45x3.2 mm anodised aluminium sliding door bolt 300x16 mm anodised aluminium sliding door bolt 250x16 mm anodised aluminium tower bolt barrel type 300x10 mm anodised aluminium tower bolt barrel type 250x10 mm anodised aluminium tower bolt barrel type 200x10 mm anodised aluminium tower bolt barrel type 150x10 mm anodised aluminium tower bolt barrel type 100x10 mm anodised aluminium handles 125 mm with plate 175 x 32 mm anodised aluminium handles 100 mm with plate 150 x 32 mm anodised aluminium handles 75mm with plate 125 x 32 mm anodised aluminium kicking plate 50 cm long 100x3.15 mm exterior primer black japan paint superior copal varnish oil type wood preservative putty for wood work plug black colour dark shade pigment red, chocolate, orange, buff or yellow red oxide of iron light shade pigment green or blue medium shade pigment ball bearing for rolling shutters galvanised steel plain sheets mild steel round bar 12 mm dia and below structural steel such as tees, angles channels and r.s. joists flats up to 10 mm in thickness flats exceeding 10 mm in thickness mild steel rivets galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots bolts and nuts up to 300 mm in length bolts and nuts above 300 mm in length superior class teak wood such as dandeli, balarshah or malabar in planks first class teak wood in planks second class teak wood in planks second class deodar wood in planks sal wood in scantling precast heat resistant terrace tiles size 300x300 mm and 20 mm thick g.i. plain washer thick water proofing materials welding by electric plant 20 mm dia holding down bolts steel weld mesh 18 mm thick flamed finish granite stone slab 18 mm thick italian marble stone slab, perlato slab area up to 0.5 sqm. commercial lpg in cylinder surface box for stop cock 8 mm dia c.p. brass/ s.s. jet with flexible tube upto 1 metre long with s.s. tringular plate for eureopean type w.c. vitreous china pedestal for wash basin flush pipe with union spreaders and clamps all in c.p. brass for single stall flush pipe with union spreaders and clamps all in c.p. brass for double stall stoneware pipes grade a 60 cm long 100 mm dia white plastic seat solid with lid c.p. brass hinges and rubber buffers black plastic seat solid with lid c.p. brass hinges and rubber buffers c.i. trap for standard urinal with vent arm with operating and other couplings in c.p. brass: 50 mm dia float glass panes of nominal thickness 4 mm weight not less than 10 kg/sqm float glass panes of nominal thickness 5 mm weight not less than 12.50 kg/sqm float glass panes of nominal thickness 8 mm weight not less than 20.00 kg/sqm anodised aluminium hanging type door stopper anodised aluminium pull bolt lock locking bolt of size 85 mm x 42 mm with screws, bolts, nuts and washers complete anodised aluminium casement stay 250 mm pre laminated both side solid foam upvc profile 45x20mm solid foam upvc sheet 20mm thick pre laminated on both side pvc edge beading expandable fastner with plastic sleeve weather/structural non sag elastomeric pu sealant 600ml sausage for joints in rcc/ brick/ stone/ wood/ ceramic/ gypsum/ alluminium work complying to astm c920, din 18540-f & iso 11600 incl all taxes structural sealant - 6 mm x 12 mm spacer tape 6.4 mm thick x 6 mm wide weather sealant - non staining 600 ml weather sealant - normal 300 ml ms brackets/aluminium alloy brackets silicon gasket in kg above 50 g / m epdm gasket in kg above 60 g / m anchor fastner - m10 ss bolt with washer of different sizes for structural glazing / acp cladding ss screws of sizes for structural glazing / acp cladding protective tape gi flashing - 1.2 mm thick 6 mm thick high performance glass 6 mm thick clear heat strengthened glass 6 mm thick clear heat strengthened glass arms gs hd - top hung -20- type p- couple connection block for vision glass panel curtain wall striker for vision glass panel adjustable fastening pawl for vision glass panel corner drive for vision glass panel top wedge block for vision glass panel baker rod fire stop 600x120 mm glass shelf with anodised aluminium angle frame, c.p. brass brackets and guard rail of standard size galvanized iron 1.6 ± 0.2 mm thick reinforcement for big series casement window/door frame, sash, mullion, big & small series sliding window frame galvanized iron 1.6 ± 0.2 mm thick reinforcement for big series sliding window / door sash g.i fasteners 100 x 8 mm stainless steel grade-304hollow section round/square tubes stainless steel bolts/square bar and plates pressed steel door frames mild steel sheet 1.60 mm profile b pressed steel door frames mild steel sheet 1.60 mm profile c pressed steel door frames mild steel sheet 1.60 mm profile e mild steel tubes hot finished welded type mild steel tubes hot finished seamless type mild steel tubes electric resistant or induction butt welded circular c.i. box for ceiling fan internal dia 140 mm, 73 mm height, toplid of 1.5mm thick ms sheet red oxide zinc chromate primer brass 100mm mortice latch and lock with 6 levers without pair of handles pair of anodised aluminium lever handles for 100 mm mortice latch and lock 12.5 mm thick tapered edge plain gypsum plaster borad confirming to is 2095 part- i : 2011 galvanised steel ceiling section size 80x26x0.50 mm galvanised steel perimetre channel size 20x27x30x0.50 mm galvanised steel intermediate channel size 15x45x15x0.90 mm galvanised steel angle hanger celling angle size 25x10x0.50 mm galvanised steel connecting clips 2.64 mm dia and 230 mm long gi wire galvanised steel soffit cleat size 27x37x25x0.60 mm joint filler joint finisher joint tape roll all drive screws for gypsum board primer for gypsum board chlorpyriphos 20% e.c. / lindane 20% e.c. acid proof cement self tapping pan head nickel coated mild steel screws of size 13 x3.2 mm fibre joint tape 50 mm wide 90 metre roll 12.5 mm thick fully perforated gypsum board galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm 12.5 mm thick tapered edge moisture resistant plain gypsum plaster board confirming to is 2095 part- i : 2011 nickel plated m.s. pipe 25 mm dia nickel plated m.s. pipe 20 mm dia nickel plated m.s. brackets for curtain rod 20 mm nickel plated m.s - brackets for curtain rod 25 mm oxidised mild steel screws 35 mm rawl plug 50 mm designation 10 nos aluminium tee channel heavy duty with rollers and stop end aluminium hanging floor door stopper with twin rubber & stopper hydraulic door closer tubular type aluminium section body chequered precast cement concrete tiles 22 mm thick using marble chips of size 6mm - light shade using white cement acid and alkali resistant tiles 300x300 mm size, 10 mm thick stainless steel kitchen sink - with drain board 510 x 1040 mm bowl depth 200 mm stainless steel kitchen sink - without drain board 610x510 mm bowl depth 200 mm coloured other than black solid p.v.c. seat in european w.c. pan circular shape 450 mm dia mirror with plastic moulded frame rectangular shape 453x357 mm mirror with plastic moulded frame oval shape 450x350 mm outer dimensions mirror with plastic moulded frame rectangular shape 1500x450 mm mirror with plastic moulded frame hard board 6 mm thick flexible coil shaped pvc waste pipe for sink and wash basin 32mm dia with length not less than 700 mm i/c pvc waste fittings flexible coil shaped pvc waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c pvc waste fittings u-pvc pipes working pressure 4 kg / cm² single socketed pipe 75 mm dia u-pvc pipes working pressure 4 kg / cm² single socketed pipe 110 mm dia u-pvc pipes working pressure 4 kg / cm² rubber seal ring 75 mm dia u-pvc pipes working pressure 4 kg / cm² rubber seal ring 110 mm dia upvc coupler for upvc drainage pipes 75 mm upvc coupler for upvc drainage pipes 110 mm upvc pushfit coupler single 75 mm thick upvc pushfit coupler single 110 mm thick upvc single equal tee without door 75x75x75 mm upvc single equal tee without door 110x110x110 mm upvc single equal tee with door 75x75x75 mm upvc single equal tee with door 110x110x110 mm upvc bend 87.5° 75 mm bend upvc bend 87.5° 110 mm bend upvc plain shoe 75 mm bend upvc plain shoe 110 mm bend upvc pipe clip 75 mm bend upvc pipe clip 110 mm bend precast chequered cement tiles 22 mm thick dark shade using ordinary cement precast chequered cement tiles 22 mm thick medium shade using 50% white cement 50% ordinary cement epoxy paint melamine polish table rubbed polished stone 18mm thick 75x50cm granite stone- 18 mm thick pressed clay tiles 20mm thick 250x250 mm size glass wool 50 mm thick granite of any colour, 18 mm thick slab area above 0.50 sqm aluminium t or l sections double coupler 12 mm m.s. u beading p.v.c. automatic flushing cistern 5 litre capacity glass reinforced gypsum grg plaster board 12.5 mm thick confirming to is 2095 part- 3 : 1996 galvanised m.s. sheet 0.5 mm thick pressed channel section of size 50x32 mm galvanised m.s. sheet 0.50 mm thick pressed stud : 48x34x36 mm white vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per is:2556 12 mm dia 50 mm long wedge type expanded zinc alloy dash fastener spigot for standard jointing dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt anodising 15 microns on aluminium sections epdm gasket for upvc window/door anodising 25 microns on aluminium sections powder coating 50 microns on aluminium sections polyester powder coating 50 microns on aluminium sections double action hydraulic floor spring with stainless steel cover plate 6 mm dia g.i. adjustable hangers including clips up to 1.2 m length double action hydraulic floor spring with brass cover plate base jack challies cup locks prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded medium density grade i, type ii conforming to is : 12823 exterior grade 12 mm thick prelaminated particle board with both sides decorative lamination, flat pressed 3 layer & graded medium density grade i, type ii conforming to is : 12823 exterior grade 12 mm thick pvc blind pipe 150 mm dia as per is: 12818 pvc blind pipe 200 mm dia as per is: 12818 pvc slotted pipe 150 mm dia as per is: 12818 pvc slotted pipe 200 mm dia as per is: 12818 upvc blind pipe 100 mm dia as per is: 12818 upvc slotted pipe 100 mm dia as per is: 12818 epoxy sbr polymer acrylic polymer chemical for cracks 24 mm thick factory made shutters with style, rails and panels of pvc extruded sections in white, grey or wooden finish 30 mm thick factory made shutters with style, rails and panels of pvc extruded sections in white, grey or wooden finish 48mmx40mmx1.5mm thick factory made door frame of pvc extruded sections in white, grey or wooden finish upvc extruded small series casement window frame size 47x50mm upvc extruded small series casement window sash/window mullion size 47x68 mm upvc extruded glazing bead of appropriate dimension for small series casement window sash upvc extruded glazing bead of appropriate dimension for big series of sliding window/ door sash upvc extruded big series 3 track sliding window/door frame size 116x45mm upvc extruded small series 2 track sliding window sash/3 track sliding window sash size 32x60mm upvc extruded big series 2 track sliding window sash size 46x62mm upvc extruded big series 3 track sliding window sash size 46x62mm upvc extruded interlock of appropriate dimension for small series sliding window sash upvc extruded interlock of appropriate dimension for big series sliding window/ door sash upvc extruded inline adaptor of appropriate dimension for big series sliding window/door sash upvc extruded 2 track sliding door sash/ 3 track sliding door sash big series size 46x82mm a.p.p. modified 3 mm thick membrane reinforced with polyester matt bitumen primer for bitumen membrane geotextile 120 grams per sqm membrane stainless steel screws 50 mm stainless steel screws 40 mm concealed zinc coated hinges 19-20 mm thick with mounting plate acrylic exterior paint premium acrylic exterior paint textured exterior paint galavanised ms 8 mm outer diameter m-6 dash fastener 50mm long g.i main runner 15 x32 mm of 3000 mm length, 0.33 mm thick g.i cross-t 15 x32 mm of 1200 mm length, 0.33 mm thick 15 mm thick, light weight, integral densified micro look edged, false ceiling tiles of size 595x595 mm. 15 mm thick, light weight, fully perforated square/butt edge integral densified, false ceiling tiles of size 595x595 mm. powder coated steel section main-t ceiling sections 15x42x0.40 mm 3000 mm long galvanized mild steel perimeter wall angle 22x19x0.40 mm 3000mm long powder coated galvanised iron intermediate cross-t section 15x42x0.40 mm 1200 mm long powder coated galvanized iron intermediate cross-t section 15x42x 0.40mm 600 mm long 12 mm thick micro tegular edged semi perforated grg glass fibre reinforced gypsum false celing tiles of size 595x595 mm 12 mm thick micro tegular edged fully perforated grg glass fibre reinforced gypsum false celing tiles of size 595x595 mm galvanized iron intermediate cross-t section 15x32x0.33 mm 600mm long galavanised ms hanger rod 6mm dia ms fully threaded up to 1000mm length calcium silicate tegular edged celling tiles 595x595 mm and 15 mm thick on edges galvanised steel main tee ceiling section size 24x38x0.33 mm 3 metre long galvanised steel perimeter wall angle size 24 x 24 x 0.40 mm 3.00 metre long galvanised steel intermediate cross t section size 24 x 25 x 0.33mm 1.2 metre long galvanised steel intermediate cross t section size 24 x 25 x 0.33mm 0.6 metre long galvanised ms 8mm outer diameter m-6 dash fastener 25mm long gi metal tile lay-in plain tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick gi metal tile lay-in perforated tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick pvc laminated gypsum tiles square edge of size 595x595 mm and 12.5 mm thick gypsum tiles fully perforated square edge of size 595x595 mm and 12.5 mm thick main t ceiling sections 24x38x0.3 mm 3 metre long perimeter wall angle 24 x 24 x 0.3 mm 3 metre long intermediate cross t-section 24x25x0.3 mm 1.2 m long intermediate cross t-section 24x25x0.3 mm 0.6 m long hanger rod 4 mm thick adjustment clip 85x30x0.8 mm soffit cleat size 27x37x25x1.60 mm galavanised ms l-shape level adjuster of size 85x25x2 mm vitrified floor tile 50x50 cm conforming to is 15622:2006 group b1a border tiles 200x75mm size chlorinated polyvinyl - chloride cpvc pipe 15 mm outer dia chlorinated polyvinyl - chloride cpvc pipe 20 mm outer dia chlorinated polyvinyl - chloride cpvc pipe 25 mm outer dia chlorinated polyvinyl - chloride cpvc pipe 32 mm outer dia chlorinated polyvinyl - chloride cpvc pipe 40 mm outer dia chlorinated polyvinyl - chloride cpvc pipe 50 mm outer dia chlorinated polyvinyl - chloride cpvc pipe 62.5 mm inner dia chlorinated polyvinyl - chloride cpvc pipe 75 mm inner dia chlorinated polyvinyl - chloride cpvc pipe 100 mm inner dia chlorinated polyvinyl - chloride cpvc pipe 150 mm inner dia weather silicon sealant stainless steel screws 30 mm x4 mm masking tape autoclaved aerated cement aac blocks aluminium casement window fastener anodised ac 15 aluminium casement window fastener powder coated aluminium casement window fastener polyester powder coated stainless steel screws 25 mm x4 mm precoated galvanised iron profile sheet 0.50 mm tct precoated galvanised steel plain ridges 0.50 mm tct and 500-600mm wide precast c.c. kerb stone m - 25 interlocking c.c. paver block 60 mm thick, m-30 punched tape concertina coil 600 mm dia 10 m openable length total length 90 m rbt reinforced barbed wire turn buckle and strengthening bolt chain link fabric fencing mesh of size 50x50 mm made of g.i. wire of dia 4 mm chain link fabric fencing mesh of size 50x50 mm made of g.i. wire of dia 4 mm, pvc coated to outer dia 5 mm chain link fabric fencing mesh of size 25x25 mm made of g.i. wire of dia 3 mm stainless steel crampsweight 260 grams with nuts, bolts and washer for dry stone cladding telescopic drawer channels 300 mm long stainless steel roller for sliding arrangement in racks/ cupboards/cabinets shutter 50 mmx42 mmx2 mm thick factory made door frame of pvc extruded sections in white, grey or wooden finish 25 mm thick factory made pvc flush door shutter i/c carriage magnetic catcher triple strip vertical type magnetic catcher double strip horizontal type 100 mm mortice lock with 6 levers for aluminium door high polymer modified quickset tile adhesive stainless steel wire guage grade-304 aperture 1.4 mm and 0.50mm dia wire zinc alloy white powder coated touch lock withhook for upvc window/door zinc alloy body with single nylon roller weight bearing capacity to be 40 kg for upvc sliding window stainless steel ss - 304 with adjustable double nylon roller weight bearing capacity to be 120 kg for upvc sliding door/window zinc alloy white powder coated cresent lock for upvc sliding door/window stainless steel friction hinge of size 200 mm x 19 x 1.9 mm for upvc windows stainless steel friction hinge of size 250 mm x 19 x 1.9 mm for upvc windows stainless steel friction hinges ss-304 grade size 300 x 19 x 1.9 mm for upvc window stainless steel friction hinges ss-304 grade size 350 x 19 x 1.9 mm for upvc window stainless steel friction hinges ss-304 grade size 400 x 19 x 1.9 mm for upvc window wool pile/ weather pile strip for upvc sliding window aluminium grill as per is 1868 toughened glass 12 mm thickness 8 mm thick calcium silicate perforated tiles of size 595 x595 mm 8 mm thick marble tiles polished raj nagar chromium plated brass curtain rod 12 mm dia 1.25mm thick chromium plated brackets curtain rods pvc cleeves for screws chromium plated brass curtain rod 20 mm dia 1.25mm thick chromium plated brass curtain rod 25 mm dia 1.25mm thick

State Government

TRN :19551252 | 19 Dec, 2020

Tender Value : 0

Latehar - Jharkhand

Tender for supply of brick - 75a cold twisted bars hysd bars as per is:1786-2008 average rate corrosion resistant structural steel paint cement primer primer structural steel average rate tiles size 300 x 300 mm and 25 mm thick timber water based cement paint wooden ballies 2 dia for bracing wooden ballies 8 dia and 9 m long 9 m @ rs. 43.00/m wooden packing wooden staff for fastening of flag 25 mm dia, 1.0 m long a 75b brick b fly ash lime bricks falg brick conforming to is - 12894-1990 9 x 4.5 x 3 100 a at source c brick tiles 300mm x 150 mmx 50 mm d picket jhama brick ejhama khoa/metal fbangla bhattas brick of size 9 3/4 x 4 3/4 x 2 3/4 248 mm x121 mm x 70 mminclusive of royalty but exclusive of gst . 1 75 b 2 jhama bricks note :- in areas where bricks manufacture are of less size, the rate may be derived by reducing the rate in item 271d & f in proportion of the bricks rounding to nearest rs. 5.00 bricks bats at kiln site rough dressed stone boulder for masonry works. seasonel sal wood scantling sal planks : i 25 mm to 40 mm ii 12 mm to 20 mm teak wood : i scantling ii planks 25 mm to 40 mm iii planks 12 mm to 20 mm sisum wood i scantling ii planks 25 mm to 40 mm iii planks 12 mm to 20 mm seasoned gamhar wood scantling local local wood i scantling ii planks 25 mm to 40 mm iii planks 12 mm to 20 mm bamboo i 75 mm dia 6 m long to 8 m long ii 100 mm dia 6 m long to 8 m long iii 50 mm dia hill bamboo sal ballah post i 100 mm dia ii 125 mm dia iii 150 mm dia butt hinges as per clause 562 of building specification of building construction deptt. of size. i 75 mm ii 100 mm i teak ply 4 mm thick ii teak ply 6 mm thick ply wood national or equivalant make i 25 mm thick ii 19 mm thick iii 12 mm thick iv 6 mm thick orinary commercial ply i 3 mm thick ii 4 mm thick iii 6 mm thick isun mica best quality ii formica 1 mm barbed wire of 4 point, 2 ply 12 swg, 150 mm apart welded mesh 8 to 10 swg 100 to 125 mm square size c.a. sheet i corrugated 6 mm thick 1.5 m to 3.05 m long. ii a plain 6 mm thick 2.4 m to 3.05 m long b plain 4 mm -do- iii c.a. ridge, valley 1 m long plain wing adjustable iv corrugated adjustable ridge l-drop 16 mm dia 300 mm long as per 5.6.5 of building specification of bcd with screw and all fittings. i aluminum ii iron copper oxidized d-handle iron, proper oxidized as per clause 5.6.7 of building specification of b.c.d. i 150 mm long ii 125 mm long iii 100 mm long d-handle made of 16 mm wide and 6 mm thick aluminum flat. i 150 mm long and 10 mm dia ii 100 mm long and 10 mm dia aluminum pipe of 18 gauge i 12 mm dia ii 16 mm dia iii 20 mm dia iron nails i 125 mm and below ii above 125 mm iii glass clip of wire mild steel copper oxidized tower bolt as per clause 5.6.6 of building specification of b.c.d 10 mm dia, complete set. i 100 mm long ii 150 mm long iii 200 mm long iv 225 mm long v 300 mm long vi 450 mm long vii 600 mm long aluminum tower bolt as per clause 5.6.6 of buillding specification of b.c.d. top quality, 10 mm dia i 100 mm long ii 120 mm long iii 150 mm long iv 200 mm long v 225 mm long vi 300 mm long screw n.f i 75 mm size ii 60 mm size iii 50 mm size iv 40 mm size to 30 mm size v below 30 mm to 12 mm size varnish standard make sprit i primer for wood work ii primer for steel work shaliltex board for use as per expansion joint i.s. 1838-1938 filter i 25 mm thick ii 18 mm thick iii 12 mm thick shalitex primer double boiled llinseed oil a aluminum paint standard make b synthetic enamel isi mark plastic emulsion paint dry distemper oil bound distemper snowcem powder i cicko powder / inpermo waterproofing comp ii cicko liquid robin blue color for wash whitening putty blackening powder i 1st quality paint of different shades ii 2nd quality paint wax polish 1 lit 0.50 kg french polish standard make cotton ram raj shellex narial coir string narial rope 20 mm to 25 mm dia. sutli sabey string cotton string raniganj tiles ridge for above naria tiles 225 mm to 250 mm ridge for above or mungra narial rope above 25 mm dia thatching grass in bundle consisting of small & average length of grass 2.75 m bundle oxalic acid 1 lit. 1 kg iron clamp 460 mm x 40 mm x 6 mm rolling shutter 1.02 mm thick shalimar tarphelt bh type ii group - 1 a sun glass modi b plane glass panes i 2 mm thick ii 3 mm thick iii 4 mm thick iv 6 mm thick c pin hammered glass i 3 mm thick ii 4 mm thick iii 5 mm thick d 20 mm wide 4 mm thick glass strip for flooring hessian cloth 0.3 kg/ m2 cot. gunny best quality limpet washer bitumen washer plaster of peris g.i. hook 150 mm to 10 mm dia i 25 mm x 6 mm nuts & bolts ii 16 mm x 3.75 mm nuts & bolts iii 10 mm x 3.75 mm nuts & bolts i fly proof wire netting 18 gauge wire with 12-16 nos, mesh per m2 ii fly proof wire netting light gauge turpentine oil manson polish carborandum stones 4, 6, 8 & 10 nos lime rubbish slack coal grade - c steam long flame flush door hot pressed adhesive conforming to 2202 part - 1 i.s. i 25 mm thick a both side commercial b one side teak c both side teak ii 32 mm thick a both side commercial b one side teak c both side teak iii 38 mm thick a both side commercial b one side teak c both side teak a looking eye piece best quality fevicol / ktcat / vamicol boat spike 300-400 mm long kotah stone tiles 15 mm - 23 mm thick i 300 mm x 300 mm ii 375 mm x 375 mm iii 450 mm x 450 mm white makrana marble stone 20 mm thick i 300 mm x 300 mm and below ii 300 mm x 600 mm and above white glazed tiles 6 mm thick 150 x 150 mm size commercial grade colour ceramic wall/floor tiles as per is 13712 i 150 mm x 150 mm ii 300 mm x 300mm iii 300 mm x 450mm iv 300mm x 600mm dholpur tiles 15 mm x 23 mm thick i 275 mm x 275 mm to 300 mm x 600 mm ii 300 mm x 900 mm iii 600 mm x 1200 mm mosaic/tarrazo tiles 20 mm thick in ordinary cement base. mosaic / tarrazo tiles 20 mm thick in white cement base. slacked stone lime unslacked stone lime colour pigment for cement :- i red ii black iii green iv blue marble dust daltonganj marble chips i dehradoon ii daltanganj marble chips coloured daltonganj commercial particle board interior i 12 mm 600 mm x 600 mm size ii 25 mm 600 mm x 600 mm size particle board exterior 600 mm x 600 mm size i 12 mm ii 25 mm a 100 mm dia c.a. pipe b 100 mm dia c. bend paint synthetic enamel vitrified floor tiles of size 300x300x10mm thick with water absorption less then 0.08% and conforming to is 15622 of approved make in all colours and shades.parking tiles industrial tiles vitrified tiles tread of stairs of size 1200x300x15mm thick with water absorption less then 0.08% and conforming to is 15622of approved make in all colours and shades.size of tile 1200x300 mm for tread of stairs. double charged vitrified floor tiles of size 600x600mm thick with water absorption less then 0.08% and conforming to is 15622 /iso 13006 of approved make in all colours and shades. vitrified cool roof tiles of size 300x300x10mm thick with water absorption less then 0.08% and conforming to is 154557-2007/1501 3006 of approved make in all colours and shades. vitrified floor tiles of size 800x800mm with water absorption less then 0.08% and conforming to is 154557-2007/1501 3006 of approved make in all colours and shades. vitrified floor tiles of size 1000x1000mm with water absorption less then 0.08% and conforming to is 154557-2007/1501 3006 of approved make in all colours and shades. polysulphideporing grade ;density 1.65 gm/cc polymer modified cementation coating fibre glass cloth chequered tiles cement concrete base 300x300x25mm chequered tiles cement concrete base 300x300x40mm brass screws 30 mm plastic sleeves for screw chromium plated brass screws 40 mm chromium plated brass screws 30 mm chromium plated brass screws 25 mm chromium plated brass screws 20 mm bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm nickel plated bright finished mild steel piano hinges 1 mm thick 25 mm wide bright finished or black enameled mild steel screws 40 mm bright finished or black enameled mild steel screws 25 mm bright finished or black enameled mild steel screws 20 mm bright finished or black enameled mild steel bolts and nuts 50x6 mm oxidised mild steel butt hinges 125x65x2.12 mm oxidised mild steel butt hinges 100x58x1.90 mm oxidised mild steel butt hinges 75x47x1.70 mm oxidised mild steel butt hinges 50x37x1.50 mm oxidised mild steel parliamentary hinges 150x125x27x2.8 mm oxidised mild steel parliamentary hinges 125x125x27x2.8 mm oxidised mild steel parliamentary hinges 100x125x27x2.8 mm oxidised mild steel parliamentary hinges 75x100x20x2.24 mm oxidised mild steel sliding door bolt 300x16 mm oxidised mild steel sliding door bolt 250x16 mm oxidised mild steel tower bolt barrel type 250x10 mm oxidised mild steel tower bolt barrel type 200x10 mm oxidised mild steel tower bolt barrel type 150x10 mm oxidised mild steel tower bolt barrel type 100x10 mm oxidised mild steel handles 125 mm oxidised mild steel handles 100 mm oxidised mild steel handles 75 mm oxidised mild steel screws 50 mm oxidised mild steel screws 40 mm oxidised mild steel screws 30 mm oxidised mild steel screws 25 mm oxidised mild steel screws 20 mm anodised aluminium butt hinges 100x75x4 mm anodised aluminium butt hinges 75x45x3.2 mm anodised aluminium sliding door bolt 300x16 mm anodised aluminium sliding door bolt 250x16 mm anodised aluminium tower bolt barrel type 300x10 mm anodised aluminium tower bolt barrel type 250x10 mm anodised aluminium tower bolt barrel type 200x10 mm anodised aluminium tower bolt barrel type 150x10 mm anodised aluminium tower bolt barrel type 100x10 mm anodised aluminium handles 125 mm with plate 175 x 32 mm anodised aluminium handles 100 mm with plate 150 x 32 mm anodised aluminium handles 75mm with plate 125 x 32 mm anodised aluminium kicking plate 50 cm long 100x3.15 mm exterior primer black japan paint superior copal varnish oil type wood preservative putty for wood work plug black colour dark shade pigment red, chocolate, orange, buff or yellow red oxide of iron light shade pigment green or blue medium shade pigment ball bearing for rolling shutters galvanised steel plain sheets mild steel round bar 12 mm dia and below structural steel such as tees, angles channels and r.s. joists flats up to 10 mm in thickness flats exceeding 10 mm in thickness mild steel rivets galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots bolts and nuts up to 300 mm in length bolts and nuts above 300 mm in length superior class teak wood such as dandeli, balarshah or malabar in planks first class teak wood in planks second class teak wood in planks second class deodar wood in planks sal wood in scantling precast heat resistant terrace tiles size 300x300 mm and 20 mm thick g.i. plain washer thick water proofing materials welding by electric plant 20 mm dia holding down bolts steel weld mesh 18 mm thick flamed finish granite stone slab 18 mm thick italian marble stone slab, perlato slab area up to 0.5 sqm. commercial lpg in cylinder surface box for stop cock 8 mm dia c.p. brass/ s.s. jet with flexible tube upto 1 metre long with s.s. tringular plate for eureopean type w.c. vitreous china pedestal for wash basin flush pipe with union spreaders and clamps all in c.p. brass for single stall flush pipe with union spreaders and clamps all in c.p. brass for double stall stoneware pipes grade a 60 cm long 100 mm dia white plastic seat solid with lid c.p. brass hinges and rubber buffers black plastic seat solid with lid c.p. brass hinges and rubber buffers c.i. trap for standard urinal with vent arm with operating and other couplings in c.p. brass: 50 mm dia float glass panes of nominal thickness 4 mm weight not less than 10 kg/sqm float glass panes of nominal thickness 5 mm weight not less than 12.50 kg/sqm float glass panes of nominal thickness 8 mm weight not less than 20.00 kg/sqm anodised aluminium hanging type door stopper anodised aluminium pull bolt lock locking bolt of size 85 mm x 42 mm with screws, bolts, nuts and washers complete anodised aluminium casement stay 250 mm pre laminated both side solid foam upvc profile 45x20mm solid foam upvc sheet 20mm thick pre laminated on both side pvc edge beading expandable fastner with plastic sleeve weather/structural non sag elastomeric pu sealant 600ml sausage for joints in rcc/ brick/ stone/ wood/ ceramic/ gypsum/ alluminium work complying to astm c920, din 18540-f & iso 11600 incl all taxes structural sealant - 6 mm x 12 mm spacer tape 6.4 mm thick x 6 mm wide weather sealant - non staining 600 ml weather sealant - normal 300 ml ms brackets/aluminium alloy brackets silicon gasket in kg above 50 g / m epdm gasket in kg above 60 g / m anchor fastner - m10 ss bolt with washer of different sizes for structural glazing / acp cladding ss screws of sizes for structural glazing / acp cladding protective tape gi flashing - 1.2 mm thick 6 mm thick high performance glass 6 mm thick clear heat strengthened glass 6 mm thick clear heat strengthened glass arms gs hd - top hung -20- type p- couple connection block for vision glass panel curtain wall striker for vision glass panel adjustable fastening pawl for vision glass panel corner drive for vision glass panel top wedge block for vision glass panel baker rod fire stop 600x120 mm glass shelf with anodised aluminium angle frame, c.p. brass brackets and guard rail of standard size galvanized iron 1.6 ± 0.2 mm thick reinforcement for big series casement window/door frame, sash, mullion, big & small series sliding window frame galvanized iron 1.6 ± 0.2 mm thick reinforcement for big series sliding window / door sash g.i fasteners 100 x 8 mm stainless steel grade-304hollow section round/square tubes stainless steel bolts/square bar and plates pressed steel door frames mild steel sheet 1.60 mm profile b pressed steel door frames mild steel sheet 1.60 mm profile c pressed steel door frames mild steel sheet 1.60 mm profile e mild steel tubes hot finished welded type mild steel tubes hot finished seamless type mild steel tubes electric resistant or induction butt welded circular c.i. box for ceiling fan internal dia 140 mm, 73 mm height, toplid of 1.5mm thick ms sheet red oxide zinc chromate primer brass 100mm mortice latch and lock with 6 levers without pair of handles pair of anodised aluminium lever handles for 100 mm mortice latch and lock 12.5 mm thick tapered edge plain gypsum plaster borad confirming to is 2095 part- i : 2011 galvanised steel ceiling section size 80x26x0.50 mm galvanised steel perimetre channel size 20x27x30x0.50 mm galvanised steel intermediate channel size 15x45x15x0.90 mm galvanised steel angle hanger celling angle size 25x10x0.50 mm galvanised steel connecting clips 2.64 mm dia and 230 mm long gi wire galvanised steel soffit cleat size 27x37x25x0.60 mm joint filler joint finisher joint tape roll all drive screws for gypsum board primer for gypsum board chlorpyriphos 20% e.c. / lindane 20% e.c. acid proof cement self tapping pan head nickel coated mild steel screws of size 13 x3.2 mm fibre joint tape 50 mm wide 90 metre roll 12.5 mm thick fully perforated gypsum board galvanised wire mesh of average width of aperture 1.4 mm and nominal dia of wire 0.63 mm 12.5 mm thick tapered edge moisture resistant plain gypsum plaster board confirming to is 2095 part- i : 2011 nickel plated m.s. pipe 25 mm dia nickel plated m.s. pipe 20 mm dia nickel plated m.s. brackets for curtain rod 20 mm nickel plated m.s - brackets for curtain rod 25 mm oxidised mild steel screws 35 mm rawl plug 50 mm designation 10 nos aluminium tee channel heavy duty with rollers and stop end aluminium hanging floor door stopper with twin rubber & stopper hydraulic door closer tubular type aluminium section body chequered precast cement concrete tiles 22 mm thick using marble chips of size 6mm - light shade using white cement acid and alkali resistant tiles 300x300 mm size, 10 mm thick stainless steel kitchen sink - with drain board 510 x 1040 mm bowl depth 200 mm stainless steel kitchen sink - without drain board 610x510 mm bowl depth 200 mm coloured other than black solid p.v.c. seat in european w.c. pan circular shape 450 mm dia mirror with plastic moulded frame rectangular shape 453x357 mm mirror with plastic moulded frame oval shape 450x350 mm outer dimensions mirror with plastic moulded frame rectangular shape 1500x450 mm mirror with plastic moulded frame hard board 6 mm thick flexible coil shaped pvc waste pipe for sink and wash basin 32mm dia with length not less than 700 mm i/c pvc waste fittings flexible coil shaped pvc waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c pvc waste fittings u-pvc pipes working pressure 4 kg / cm² single socketed pipe 75 mm dia u-pvc pipes working pressure 4 kg / cm² single socketed pipe 110 mm dia u-pvc pipes working pressure 4 kg / cm² rubber seal ring 75 mm dia u-pvc pipes working pressure 4 kg / cm² rubber seal ring 110 mm dia upvc coupler for upvc drainage pipes 75 mm upvc coupler for upvc drainage pipes 110 mm upvc pushfit coupler single 75 mm thick upvc pushfit coupler single 110 mm thick upvc single equal tee without door 75x75x75 mm upvc single equal tee without door 110x110x110 mm upvc single equal tee with door 75x75x75 mm upvc single equal tee with door 110x110x110 mm upvc bend 87.5° 75 mm bend upvc bend 87.5° 110 mm bend upvc plain shoe 75 mm bend upvc plain shoe 110 mm bend upvc pipe clip 75 mm bend upvc pipe clip 110 mm bend precast chequered cement tiles 22 mm thick dark shade using ordinary cement precast chequered cement tiles 22 mm thick medium shade using 50% white cement 50% ordinary cement epoxy paint melamine polish table rubbed polished stone 18mm thick 75x50cm granite stone- 18 mm thick pressed clay tiles 20mm thick 250x250 mm size glass wool 50 mm thick granite of any colour, 18 mm thick slab area above 0.50 sqm aluminium t or l sections double coupler 12 mm m.s. u beading p.v.c. automatic flushing cistern 5 litre capacity glass reinforced gypsum grg plaster board 12.5 mm thick confirming to is 2095 part- 3 : 1996 galvanised m.s. sheet 0.5 mm thick pressed channel section of size 50x32 mm galvanised m.s. sheet 0.50 mm thick pressed stud : 48x34x36 mm white vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per is:2556 12 mm dia 50 mm long wedge type expanded zinc alloy dash fastener spigot for standard jointing dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt anodising 15 microns on aluminium sections epdm gasket for upvc window/door anodising 25 microns on aluminium sections powder coating 50 microns on aluminium sections polyester powder coating 50 microns on aluminium sections double action hydraulic floor spring with stainless steel cover plate 6 mm dia g.i. adjustable hangers including clips up to 1.2 m length double action hydraulic floor spring with brass cover plate base jack challies cup locks prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded medium density grade i, type ii conforming to is : 12823 exterior grade 12 mm thick prelaminated particle board with both sides decorative lamination, flat pressed 3 layer & graded medium density grade i, type ii conforming to is : 12823 exterior grade 12 mm thick pvc blind pipe 150 mm dia as per is: 12818 pvc blind pipe 200 mm dia as per is: 12818 pvc slotted pipe 150 mm dia as per is: 12818 pvc slotted pipe 200 mm dia as per is: 12818 upvc blind pipe 100 mm dia as per is: 12818 upvc slotted pipe 100 mm dia as per is: 12818 epoxy sbr polymer acrylic polymer chemical for cracks 24 mm thick factory made shutters with style, rails and panels of pvc extruded sections in white, grey or wooden finish 30 mm thick factory made shutters with style, rails and panels of pvc extruded sections in white, grey or wooden finish 48mmx40mmx1.5mm thick factory made door frame of pvc extruded sections in white, grey or wooden finish upvc extruded small series casement window frame size 47x50mm upvc extruded small series casement window sash/window mullion size 47x68 mm upvc extruded glazing bead of appropriate dimension for small series casement window sash upvc extruded glazing bead of appropriate dimension for big series of sliding window/ door sash upvc extruded big series 3 track sliding window/door frame size 116x45mm upvc extruded small series 2 track sliding window sash/3 track sliding window sash size 32x60mm upvc extruded big series 2 track sliding window sash size 46x62mm upvc extruded big series 3 track sliding window sash size 46x62mm upvc extruded interlock of appropriate dimension for small series sliding window sash upvc extruded interlock of appropriate dimension for big series sliding window/ door sash upvc extruded inline adaptor of appropriate dimension for big series sliding window/door sash upvc extruded 2 track sliding door sash/ 3 track sliding door sash big series size 46x82mm a.p.p. modified 3 mm thick membrane reinforced with polyester matt bitumen primer for bitumen membrane geotextile 120 grams per sqm membrane stainless steel screws 50 mm stainless steel screws 40 mm concealed zinc coated hinges 19-20 mm thick with mounting plate acrylic exterior paint premium acrylic exterior paint textured exterior paint galavanised ms 8 mm outer diameter m-6 dash fastener 50mm long g.i main runner 15 x32 mm of 3000 mm length, 0.33 mm thick g.i cross-t 15 x32 mm of 1200 mm length, 0.33 mm thick 15 mm thick, light weight, integral densified micro look edged, false ceiling tiles of size 595x595 mm. 15 mm thick, light weight, fully perforated square/butt edge integral densified, false ceiling tiles of size 595x595 mm. powder coated steel section main-t ceiling sections 15x42x0.40 mm 3000 mm long galvanized mild steel perimeter wall angle 22x19x0.40 mm 3000mm long powder coated galvanised iron intermediate cross-t section 15x42x0.40 mm 1200 mm long powder coated galvanized iron intermediate cross-t section 15x42x 0.40mm 600 mm long 12 mm thick micro tegular edged semi perforated grg glass fibre reinforced gypsum false celing tiles of size 595x595 mm 12 mm thick micro tegular edged fully perforated grg glass fibre reinforced gypsum false celing tiles of size 595x595 mm galvanized iron intermediate cross-t section 15x32x0.33 mm 600mm long galavanised ms hanger rod 6mm dia ms fully threaded up to 1000mm length calcium silicate tegular edged celling tiles 595x595 mm and 15 mm thick on edges galvanised steel main tee ceiling section size 24x38x0.33 mm 3 metre long galvanised steel perimeter wall angle size 24 x 24 x 0.40 mm 3.00 metre long galvanised steel intermediate cross t section size 24 x 25 x 0.33mm 1.2 metre long galvanised steel intermediate cross t section size 24 x 25 x 0.33mm 0.6 metre long galvanised ms 8mm outer diameter m-6 dash fastener 25mm long gi metal tile lay-in plain tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick gi metal tile lay-in perforated tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick pvc laminated gypsum tiles square edge of size 595x595 mm and 12.5 mm thick gypsum tiles fully perforated square edge of size 595x595 mm and 12.5 mm thick main t ceiling sections 24x38x0.3 mm 3 metre long perimeter wall angle 24 x 24 x 0.3 mm 3 metre long intermediate cross t-section 24x25x0.3 mm 1.2 m long intermediate cross t-section 24x25x0.3 mm 0.6 m long hanger rod 4 mm thick adjustment clip 85x30x0.8 mm soffit cleat size 27x37x25x1.60 mm galavanised ms l-shape level adjuster of size 85x25x2 mm vitrified floor tile 50x50 cm conforming to is 15622:2006 group b1a border tiles 200x75mm size chlorinated polyvinyl - chloride cpvc pipe 15 mm outer dia chlorinated polyvinyl - chloride cpvc pipe 20 mm outer dia chlorinated polyvinyl - chloride cpvc pipe 25 mm outer dia chlorinated polyvinyl - chloride cpvc pipe 32 mm outer dia chlorinated polyvinyl - chloride cpvc pipe 40 mm outer dia chlorinated polyvinyl - chloride cpvc pipe 50 mm outer dia chlorinated polyvinyl - chloride cpvc pipe 62.5 mm inner dia chlorinated polyvinyl - chloride cpvc pipe 75 mm inner dia chlorinated polyvinyl - chloride cpvc pipe 100 mm inner dia chlorinated polyvinyl - chloride cpvc pipe 150 mm inner dia weather silicon sealant stainless steel screws 30 mm x4 mm masking tape autoclaved aerated cement aac blocks aluminium casement window fastener anodised ac 15 aluminium casement window fastener powder coated aluminium casement window fastener polyester powder coated stainless steel screws 25 mm x4 mm precoated galvanised iron profile sheet 0.50 mm tct precoated galvanised steel plain ridges 0.50 mm tct and 500-600mm wide precast c.c. kerb stone m - 25 interlocking c.c. paver block 60 mm thick, m-30 punched tape concertina coil 600 mm dia 10 m openable length total length 90 m rbt reinforced barbed wire turn buckle and strengthening bolt chain link fabric fencing mesh of size 50x50 mm made of g.i. wire of dia 4 mm chain link fabric fencing mesh of size 50x50 mm made of g.i. wire of dia 4 mm, pvc coated to outer dia 5 mm chain link fabric fencing mesh of size 25x25 mm made of g.i. wire of dia 3 mm stainless steel crampsweight 260 grams with nuts, bolts and washer for dry stone cladding telescopic drawer channels 300 mm long stainless steel roller for sliding arrangement in racks/ cupboards/cabinets shutter 50 mmx42 mmx2 mm thick factory made door frame of pvc extruded sections in white, grey or wooden finish 25 mm thick factory made pvc flush door shutter i/c carriage magnetic catcher triple strip vertical type magnetic catcher double strip horizontal type 100 mm mortice lock with 6 levers for aluminium door high polymer modified quickset tile adhesive stainless steel wire guage grade-304 aperture 1.4 mm and 0.50mm dia wire zinc alloy white powder coated touch lock withhook for upvc window/door zinc alloy body with single nylon roller weight bearing capacity to be 40 kg for upvc sliding window stainless steel ss - 304 with adjustable double nylon roller weight bearing capacity to be 120 kg for upvc sliding door/window zinc alloy white powder coated cresent lock for upvc sliding door/window stainless steel friction hinge of size 200 mm x 19 x 1.9 mm for upvc windows stainless steel friction hinge of size 250 mm x 19 x 1.9 mm for upvc windows stainless steel friction hinges ss-304 grade size 300 x 19 x 1.9 mm for upvc window stainless steel friction hinges ss-304 grade size 350 x 19 x 1.9 mm for upvc window stainless steel friction hinges ss-304 grade size 400 x 19 x 1.9 mm for upvc window wool pile/ weather pile strip for upvc sliding window aluminium grill as per is 1868 toughened glass 12 mm thickness 8 mm thick calcium silicate perforated tiles of size 595 x595 mm 8 mm thick marble tiles polished raj nagar chromium plated brass curtain rod 12 mm dia 1.25mm thick chromium plated brackets curtain rods pvc cleeves for screws chromium plated brass curtain rod 20 mm dia 1.25mm thick chromium plated brass curtain rod 25 mm dia 1.25mm thick

corporations/Associations/Others

TRN :19553247 | 04 Dec, 2020

Tender Value : 0

Jammu - Jammu And Kashmir

Tender for construction of entry gate back side wall toward fields and fitting of water tank at cremation ground pouni chak band waziram in ward no 32

Central Government/Public Sector

TRN :19541198 | 04 Dec, 2020

Tender Value : 63.43 Lacs

Durgapur - West Bengal

Tender for construction of 1250 seated boys hostel for nit sh chain link fencing all round the hostel 2 nos gate at front main entry and back side entry with security post construction of balance boundary wall in the back side of work shop 4 nos collapsible gates in block iii and iv back side main entry and at main entry gate

Central Government/Public Sector

TRN :19531562 | 16 Dec, 2020

Tender Value : 2.50 Lacs

Hyderabad - Andhra Pradesh

Tender for moringa farm partitioning

corporations/Associations/Others

TRN :19532215 | 07 Dec, 2020

Tender Value : 99.84 Lacs

Yamuna Nagar - Haryana

Tender for construction of entry gates 2 no. locations at kurukshetra road near damla and at saharanpur road near village pansra in municipal limit municipal corporation

State Government

TRN :19524844 | 17 Dec, 2020

Tender Value : 0

Barpeta Road - Assam

Tender for re furbishing including supply of furniture and repairs, partitioning and electrical connection

corporations/Associations/Others

TRN :19508294 | 04 Dec, 2020

Tender Value : 15.78 Lacs

Tehri Garhwal - Uttaranchal

Tender for construction of entry gate

State Government

TRN :19500813 | 11 Dec, 2020

Tender Value : 1.46 Lacs

Kolkata - West Bengal

Tender for construction of main entry gate

Related Keywords : aluminum sliding door

List of latest aluminum-sliding-door Tenders in Indian Tenders. Click on any aluminum-sliding-door Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for aluminum-sliding-door Tenders.

Tender for construction of entry gate back side wall toward fields and fitting of water tank at cremation ground pouni chak band waziram in ward no 32

Tender for moringa farm partitioning

Tender for construction of entry gates 2 no. locations at kurukshetra road near damla and at saharanpur road near village pansra in municipal limit municipal corporation

Tender for re furbishing including supply of furniture and repairs, partitioning and electrical connection

Tender for construction of entry gate

Tender for construction of main entry gate

Get aluminum sliding door Tender Alert...

Related Keywords : aluminum sliding door

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us