Filters

List of latest aluminum-frame Tenders in Indian Tenders. Click on any aluminum-frame Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for aluminum-frame Tenders.

All-Tenders (9)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :19335900 | 31 Oct, 2020

Tender Value : 0

Srinagar - Jammu And Kashmir

Tender for supply of aluminum doors frames etc

State Government

TRN :19312921 | 29 Oct, 2020

Tender Value : 23.95 Lacs

Bikaner - Rajasthan

Tender for replacement and repairing work at stone slab roofing on ground floor with fine grained stone slab from aproved quarry soorsagar, jodhpur including filling of joints of parapet and slab on both sides in cement sand mortar 1 :4 with top 15cm. thick lime concrete 40:100 terracing as per bikaner practice including sandla ralthal, hemp and methi well tapping finished smooth polished surface in all respects in lime surkhimortar 1 : 2 with nails and wire and lime batta gola 75 mm x 75 mm and sandla etc. complete finished for span : above 2.0 m and upto 2.50 metre. providing and laying lime terrace of lime concrete 40:100 with kankar in lime mortar 1 : 2 on roofs of ground floor including mixing hemp methi etc. finished smooth polished surface complete bikaner practice including batta gola 75mm x 75mm and sandla for thickness.75 mm thick repair to damaged cement plaster of stone chajja with cm 1 : 3 of required thickness on top & bottom as per existing pattern and making patta etc complete up to three floor level as per direction of engineer in charge including all necessary scoffolding etc repair of door, window shutters including cost of material and labour for change of damaged : style / rail of teak wood 30mm thick/ aluminium section 6 wide panel by shuttering ply - 9mm thick commercial providing and fixing double scaffolding system on the exterior side, upto five story made with 4 wodden member 1.5 m c/c horizontal and vertical direction joining with rassi, clamps, challies. the scaffolding system shall be stiffened with bracing, runner, connection of building if necessary with all essential safty features for the workmen etc complete as per direction of ei.the lavation area of the scaffolding shall be mearured for payment. the paeyment will be made once irrespective of duration of scaffolding. note : this item to be used for maintence work judically providing and fixing steel gate, grating, and grills made of angles, tees, square bars, flats, or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide providing and fixing of double leaf steel shutter for cupboard, the frame is made of pressed steel isi section 80x25 mmx 1.25 mm thick with 1.00 mm ms sheet to spot welded including holdfasts of 15x3mm, ms oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting in approved shade with deco paint of approved quality complete as per direction of engineer in charge providing and fixing calcium silicate perforated board false ceiling at all heights including providing and fixing of frame work made of special sections power pressed from m.s. sheet and galvanised in accordance with zinc coating of grade 350 as per is : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to g.i. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to g.i. channel with connecting clips made out of 2.64mm diax230mm long g.i. wire at every junction including fixing the calcium silicate board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the engineer in charge but but excluding the cost of painting of thickness of calcium silicate board as below:- 8 mm thick structural steel work in single section fixed with or without connecting plate including cutting, hoisting height upto 10 m, fixing in position and applying a priming coat of approved steel primer all complete. distempering with 1st quality acrylic washable distemper ready mixed of approved manufacturer and of required shade and colour completeincluding all scaffolding as per manufacturers specification. two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect. painting exterior surface of wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect. on old work p & f of ip20 led recess ed / surface mounted, round / sqaure non- dimmable downlight with die-cast aluminum housing & heat sink for heat dissipation, high purity reflector with external bis certified 2.5 kv surge b5o/o and in compliance to iec standards. system lumen efficacy of > 100 lm / watt and life time of minimum 35000 burning hours with 700/o of intial lumen maintaned, cct 3000k / 4000k / 6000ok, maximum power consumption should not more than the specified rating and fixture shall be of ce complianed. e304610 recessed mounting e30461 1 led downlight 2/3 watt each led downlight 18/20w p & f of ip20 led ceiling/ recessed/ suspended mounting light fixture made form crca sheet steel housing, high purity/ transmisivity diffuser for uniform light distrubution.high efficiency driver electronics having efficiency > 85% and in compliance to iec standards . integral driver. power consumption of 40 w/50w/60w, 3000/3300/4200 lumens, system lumen efficiency of 70-80 lm /watt output suitable for 2x36w ftl/2x36w cfl/3x36 w cfl light fixtures, life time of 50000 burning hours with 70% intial lumens maintained. cct 3000°k, 4000°k and 6000°k. fixture shall be ce compliance.57.25.1 recessed 36w led light 2’x2’ with acrylic/ prismatic front cover half brick masonry with common burnt clay f.p.s.non modular bricks of class designation 7.5 in superstructure, above plinth level upto floor five level .cement mortar 1 : 4 1 cement : 4 coarse sand plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 20mm thick . providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m15 grade nominal mix 1: 2: 4 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size. supplying and fixing in walls machine cut and polished stone shelves, tands and in cm 1:3 with machine cut edges : kota stone 25 to 30mm thick. repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead : with cement mortar 1 :4 1 cement : 4 coarse sand providing & fixing door, window, chowkhats and other frames, including antitermite treatment, m.s. flat, hold fasts of size 250 x 40 x 3mm fixed with m.s. bolt 5mm dia 50mm long duly embedded in cement concrete m-15 grade :nigeria teak wood grade - i. providing and fixing external grade board solid core single/ double leaf flush door shutters is: 2202part-ii1996 marked using phenol formal dehyderesin in glue both sides with approved stainless steel fittings complete as per annexure a : 25 mm thick . decorative teak veneer both side providing and fixing nigeria / ghana /ivory coast teak wood grade-i mouldings and beadings in droos and windows size :- 25x20 mm providing and fixing almirah lock 50 to 70 mm size of approved make without pair of handles for door with necessary screws etc complete as per direction of engineer-in-charge. for shutters builtup standard tubular sections of openable doors, windows & ventilators including providing & fixing hinges / rollers etc. and making provision for fixing of fittings wherever required lockes shall be paid for separately. anodised aluminum anodised transparent 81 dyed to required shade according to is : 1868. minimum anodic coating of grade ac 15, anodizing to be got done from approved anodizer providing and fixing aluminum work for doors, windows, ventilators and partition with extruded built up standard tubular / appropriate z sections and other sections of approved make conforming to is :733 and is :1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gap. at junctions, at top, bottom and sides with required pvc/neoprene felt etc. aluminium section shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle aluminium snap beading for glazing /paneling, c.p. brass/ stainless steel screws al. tower bolt & al. handle & al. aldrop etc., all complete as per architectural drawings and the directions of engineer- in – charge .glazing and paneling to be paid for separately. for fixed portion anodised aluminum anodised transparent 81 dyed to required shade according to is : 1868. minimum anodic coating of grade ac 15, anodizing to be got done from approved anodizer providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with pvs / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.cost of aluminium snap beading shall be paid in basic item. with glass panes of 4.0 mm thickness weight not less than 10.0 kg/sqm as per is : 2835. pointing on stone slab ceiling with cement mortar 1:2 1 cement : 2 fine sand: flush/ ruled pointing add :- extra for pointing on walls on the outside at height more than 10 m from ground level for every additional height of 3 m or part there of. replacement of stone chajja with sriwan in damaged portion as per existing thickness and width in cm 1 : 3 with removal of old damaged pieces of chajja including top plaster of chajja and bottom pointing in cm 1 : 3 with scoffolding upto three floor level as per direction of engineer in charge providing and fixing stone jali 50mm thick red/pink sand stone as per ornamental design to fixed with white cement/epoxy mortar including pointing in white cement mortar 1:2 1 white cement : 2 stone dust with an admixture of pigment, matching the stone shade. dulmera stone cladding using fine grained, sand stone of thickness 35 to 40mm with a base of 20mm average thickness cement mortar of mix 1:4 using ms clamps to fix the stone including jointing with colour pigment match to stone shade and as per approved drawing & design and as per instruction to engineer in charge. supplying and fixing machine cut fine dressed red/pink sand stone dasa or coping, with full moulding if required laid on cement mortar 1:4 including pointing with admixture of pigment matching with the stone shade. 25 mm thick

State Government

TRN :19293022 | 27 Oct, 2020

Tender Value : 0

Reasi - Jammu And Kashmir

Tender for construction of plant room for medical oxygen generator mgps manifold system and allied equipments at district hospital earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. not exceeding 1.5 mtr in width and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan., depth upto 1.5 mtr including disposal of excavated earth upto 50 metre beyond 1 mtr from cutting edge, disposed earth is to be leveled and neatly dressed in:all kinds of soil. for plinth work and foundations. providing and laying of cement concrete of specified grade including curing but excluding the cost of centering and shuttering. all work upto plinth level. 1:4:8 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. all work upto plinth level.1:2:4 1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal in size structural steel work in built up section, trusses and framed work including cutting, hosting, fixing in position and applying a priming coat of approved steel primer all complete using riveted and bolted / welded. 8 no. of trusses including nut bolts, kingpost, struts, purlins, tie beam, cleats, plates, rafter etc. providing pre profiled colour coated corrugated sheets to be laid over a frame work of truses columns and purlins using hot dipped zinc coated self drilling hexagonal washers, fasteners. colour coated ridge is to be fixed on top junction, j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i limpet washers filled with white lead complete upto any pitch in horizonat/vertical or curved surface excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. using 0.63 mm thick zinc coating not less than 275 gm/m2 providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required epdm rubber / neoprene gasket felt etc. aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per the directions of engineer-in-charge glazing, panelling and dash fasteners to be paid for separately. for aluminium shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber / neoprene gasket required fittings shall be paid for separately. polyester powder coated aluminum minimum thickness of polyester powder coated 50 microns door : 7’x3’- 1 no, windows 3’x3’ – 2 nos and window 2’x3’ – 1 no providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to is: 12823 grade-i type-ii in panelling fixed in aluminum doors, with c.p. brass / stainless steel screws etc. complete directions of engineer-incharge. pre-laminated particle board with decorative lamination on both sides providing and fixing glazing in aluminum window with epdm rubber / neoprene gasket etc. complete as per and the directions of engineerin-charge. cost of aluminum snap beading shall be paid in basic item with float glass panes of 8 mm thickness weight not less than 20.0 kg / sqm providing and fixing double action hydraulic floor spring of approved brand and manufacture is : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor 22.0 aluminum work 290 code no. description unit rate ? finishing and cover plates with brass pivot and single piece m.s. sheet outer box with slide plate etc. complete as per the direction of engineer-in-charge. with brass cover plate minimum 1.25 mm thickness providing and fixing aluminum tubular handle bar 32mm outer dia, 3.0mm thick & 2100mm long with ss screw etc. complete as per direction of engineer-in-charge. polyester powder coated minimum thickness 50 micron aluminum tubular handle bar providing and fixing brass 100mm mortice latch and lock with 6levers without pair of handles best make of approved quality for aluminium doors including necessary cutting and making good etc. complete. providing of table -1no of standard size with 4 chairs made out of wood/board/steel for operator. complete in all respects. cost includes material, carriage, labor and taxes. cement concrete flooring 1:2:4 1 cement: 2 coarse sand: 4 graded stone finished with a floating coat of neat cement including cement slurry and curing complete but excluding the cost of noising of steps complete. 50mm thick 20mm size stone aggregate. providing and fitting of 01no main entry/exit door and one emergency door on opposite ends and one door for operators room of size 7’x3’ fabricated out of ms section and sheet with frame including primer and enamel paint and allied accessories providing and fitting of 6 nos. heavy duty industrial type exhaust fans above 10’ height with wiring and other accessories including providing and fitting of 6 nos. roof top wind driven turbo ventilators providing and fitting of wire mesh made of galvanized iron with 25mmx25mm square opening and to be fitted on the existing angle frame with the help m/s nut & bolts of size m10x40x1.25 & m/s iron flat of size 25mmx3mm. the bolts are to be welded on the existing frame for fastening of the wire mesh and ms flat. the wire mesh should be having a square opening 8”x4” for operating the existing glass window. mesh is to be fitted in such a way so that it can easily be removed whenever required. the job includes an opening of 3’x3’ in front and back. electrification of whole shed including providing and laying of wires- 1.5 sqm- 05 rolls, 2.5sqm – 02 rolls, boards for supplying 3 phase power for mechanical equipments. 10 nos each power points and heating points in the shed, 12 nos – 100 watt capacity led bulbs, 02 nos. lighting points in the operator room. 02 nos. 15 watt led bulbs and 36” fan in operator room. providing and laying of gi 300mmx50mmx2mm cable tray for accommodating varies cables of machinery. providing of the electrical safety insulation rubber mats confirming to is : 15652 & is : 5424 with lower plain surface and size 1.2m x 2.4m x 20mm. – 20 nos. providing and laying of 6-10mm ms plate 400 sqft along the floor adjoining oxygen manifolds and main entrance of plant room to prevent damage to flooring design, fabrication and fixing of ms pipe gate 10 ft x 10 ft size by way of metal welding of ms rectangular pipe 1.25 inch x 03 inch including cutting, hoisting and fixing in position along with fixing of 1 inch square type weld mesh on the ms gate of the plant room and applying welding and bolting with special shaped washers etc. complete job includes cost of material, tools and tackles, labor charges, carriage, transportation, allied civil works and all applicable taxes

Central Government/Public Sector

TRN :19259275 | 28 Oct, 2020

Tender Value : 0

Jaisalmer - Rajasthan

Tender for supply of xlpe cable 95 sqmm, 3.5 core insulated screened pvc bedded, galvanized steel strip or wire armored, electric power cables heavy duty 1100 volts grade with stranded aluminums conductor, lugs and cable gland, only bus chamber factory made outdoor type, cpri approved, size 0.45mx0.75mx0.4m deep, fabricated out of 3.15 mm thick mild steel sheet and vermin proof with neoprene gasket having front opening and locking arrangement with ip-54 protection, bus chamber factory made outdoor type, cpri approved, size 0.45mx0.75mx0.4m deep, fabricated out of 3.15 mm thick mild steel sheet and vermin proof with neoprene gasket having front opening and locking arrangement with ip-54 protection, galvanized steel tubing, light grade, with fitting and ms clamps, nuts, bolts, rough stone patti, screw drivers, electric tester, hacksaw frame, hacksaw blade double ended measuring tape 30 mtrs durmut 10 kg pan mortar tasla trowel mason mason square plumbing bob with cotton thread cutting pliers taparia for minimum electrification

Central Government / Public Sector

TRN :19260101 | 29 Oct, 2020

Tender Value : 0

Vijayawada - Andhra Pradesh

Tender for supply of supply of battery bank particulars board duly providing the battery particulars and data in printed format as per the description given by the department. the printed format provided on a hard melamine board provided with back mount support sheet and aluminum angle frame. size: 120cm x 90cm.

Central Government/Public Sector

TRN :19153295 | 03 Nov, 2020

Tender Value : 40.00 Lacs

Dehradun - Uttaranchal

Tender for supply and installation of mechanic-rac trade equipments machinery - surface plate oil can surface gauge universal bench vice hack saw tubular metal frame adjustable snip sheet metal straight nose snip sheet metal curved nose anvil stakes different types tin smith wooden mallet /nylon mallet round punch electrical drill portable drill with chuck and key soldering iron exchangeable copper tip knife folded stainless steel - tong tester clamp on multi meter tenon saw firmer chisel rawal plug tool fire extinguisher fire buckets ring spanner quick couples, process tube adopter tong close mouth and pick ratchet spanner capillary plug gauge spanner double ended ring spanner off set wrench adjustable wrench adjustable wrench adjustable valve key handletreated as consumable hollo punch hole for cutting gasket pipe cutter with built in reamer and space cutter, for copper tube pipe /tube bender lever type spanner double ended pipe wrench lapping plate hammer ball peen puller 3 legged with flexible arm hand blower portable complete spirit level precision metallic tap set with matching drills tap set with matching drills refrigerant cylinder heating kit with infrared bulb plumbing hammer cylinder torque wrench piercing valve feeler gauge four way reversible valve vernier hight gauge tape measuring graduation in mm megger sling psychro meter mounted on aluminum back, stop watch fin straightened/fin comb. filler gauge wire gauge voltmeter ac/dc portable precision grade digital panel board type ammeter ac/dc portable precision grade digital panel board type wattmeter multi-range multi meter digital type k.w. meter service oscillator c.r.o single beam c.r.o dual trace/ double beam a.f.o oscillators pressure gauge digital type compound gauge, digital type service man thermometer in metal case gas leak detector for halogen gas electronic leak detector vernier caliper micrometer outside measurement multi meter tachometer digital, multi range micron vacuum gauge sensor thermometer digital dial thermometer remote control, armored capillary dial anemometer compressors testers for small hermetic compressors digital thermometer temperature & humidity recorder digital weighing machine split phase induction motor bldc motor with controller idu pulse generation type motor capacitor start induction motor ac 3 phase motor, 400/50 hz star delta starter auto transformer starter d.o.l starter portable air - lpg brazing kit oxy-acetylene welding set complete single door direct cool refrigerator, frost free refrigerator three/four door refrigerator inverter type core drill machine. bench drilling machine grinding machine evacuating and refrigerant charging station, consist of a rotary two stage vacuum pump and motor with gas ballast and anti such back b manifold with gauges and valves and capable of pulling vacuum up to 50 microns of hg and with provision of connecting to a microns level vacuum gauge bgraduated charging cylinder with provision for temperature correction and all necessary isolating valves evacuating and charging station as above but fitted with weighing scale two stage rotary vacuum pump, 3or 4 cfm. dry n2 cylinder window a.c split a.c duct able split a.c 1.5 ton recovery unit with cylinders decibel meter cassette air conditioner de scaling pump set fan coil unit shell and tube, dx chillers small circulating water pump small refrigerant cylinder gauge manifold with gauges shell and tube type condenser rotary hermetic compressor bottle cooler visible deep freezer display cabinet water cooler storage type water dispenser bubble type hot and cold ice candy plant air-conditioning, direct system. air-conditioning, indirect system. water cooled package a/c car a.c componentsfull kit a wobble plate compressor with mounting brackets. b serpentine evaporator c parallel flow condenser d hoses, tubes, receiver, ex. valve. e electrical components & wiring harness car ac tutorial model bus ac tutorial model automatic ice cube m/c storage type water cooler hot and cold visi cooler vrf/vrv unit with two indoor units 2.5tr each and 5tr capacity out door unit complete with air cooled condenser, accessories and controls. split a/c inverter technology walk in cooler puf insulated for cold room 6x4.5x8 cft. absorption system for upgradation of priority itis

Central Government/Public Sector

TRN :19329906 | 03 Nov, 2020

Tender Value : 0

Sundergarh - Orissa

Tender for supply of calibration gas mixture in 0.5 litre w/c aluminium canister along with fine control needle valve: methane %u2013 1000ppm, ethane %u2013 1000 ppm, ethylene %u2013 1000ppm, acetylene %u2013 1000ppm, hydrogen %u2013 1000 ppm, carbon dioxide %u2013 5000 ppm, carbon monoxide %u2013 5000 ppm and nitrogen balance. filling pressure: 20 kg/cm2

Central Government / Public Sector

TRN :19313705 | 16 Nov, 2020

Tender Value : 5.81 Crore

Mumbai - Maharashtra

Tender for rate contract for supply of aluminium dish ends with free issue material for cryocans

State Government

TRN :19230084 | 31 Oct, 2020

Tender Value : 0

Jammu - Jammu And Kashmir

Tender for supply of sample items and miscellaneous items- surgical gloves pair cotton absorbent 500 gm cotton non – absorbent 500 gm adhesive tape 3” x 9 mtr roll disposable syringe 2 ml disposable syringe 5 ml disposable syringe 10 ml disposable syringe 20 ml disposable syringe, 50 ml towel big 26inch* 52inch towel small 17inch37inch i/v set disposable bandage roll 3” x 5 mtrs first aid box apron coat full size scissors straight 6” scissors straight 9” scissor curved 6” scissor curved 9” disposable needles assorted size pack of 100 face mask surgical tattooing ink cream based ear tag plastic for sheep /goat embossed with letters and numbers face mask n95 clincher for plastic ear tags specific to the item 23 ear tag aluminium clincher for aluminium tags specific to the item 25 hoof paring scissiors clinical thermometer isi mark igloo box / vaccine carrier having 1.6 l vaccine carrying capacity igloo box / vaccine carrier having 8 l vaccine carrying capacity digital weighing scale, lock/ clamp type, capacity 150 kgs power and battery operated surgical/dressing set complete containing items as per annexure of nit. plastic chair minimum 2.9 kg wt tarpauline canvas 12 x 15 ft tarpauline canvas 15 x 18 ft sleeping bag standard polypropylene sheet 12 x 15 ft polypropylene shhet 15 x 18 ft tub plastic 20-25 ltr. jug plastic 2 ltr. cap. mug plastic 1 ltr. cap feeding troughs 20 guage 8 “ x 12 “ x 6 ft trunk steel 20 guage 1.5 ft. height 3 ft. length 2 ft. width tent double fly 10 x 10 ft. with accessories chouldhari single fly 8 x 8 ft. with accessories dangri standard size automatic vaccinator branded 5ml capacity, bottle attachment, range 0.5 ml to 5 ml non corrosive body. shepherding knife plastic table standard size steel rack 3 shelves steel rack 5 shelves hypodermic needles 20 guage pack of 10 magnifying lens haver sack water proof jacket water proof trekking/ sport shoes branded size 6, 7, 8, 9, 10 pressure cooker 5 ltr isi mark bucket plastic 20 ltr dustbin plastic steel almirah 5 shelves castrator for small ruminants spring balance digital for 100 kgs umbrella full size branded flash light torch rechargeable branded rabbit cage stainless steel l- 28 inch b- 19 inch mesh size bottom 12mm * 12mm frame top30mm *30mm door on front width 16 inches foldable on top attached feeders and hay rack.

Related Keywords : aluminum frame

List of latest aluminum-frame Tenders in Indian Tenders. Click on any aluminum-frame Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for aluminum-frame Tenders.

Tender for supply of aluminum doors frames etc

Tender for rate contract for supply of aluminium dish ends with free issue material for cryocans

Get aluminum frame Tender Alert...

Related Keywords : aluminum frame

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us