Filters

List of latest aluminum-door-repair Tenders in Indian Tenders. Click on any aluminum-door-repair Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for aluminum-door-repair Tenders.

All-Tenders (5)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :19355232 | 09 Nov, 2020

Tender Value : 30.00 Lacs

Rajkot - Gujarat

Tender for special repair to government press colour work, door window, aluminum section window, mosquito proof net

State Government

TRN :19346760 | 04 Nov, 2020

Tender Value : 13.38 Lacs

Idukki - Kerala

Tender for building maintanance 7.38.1.1 : stone tile work for wall lining upto 10 m height with special adhesive over 12mm thick bed of cement mortar 1:3 1 cement :3 coarse sand, including pointing in white cement with an admixture of pigment to match the stone shade.8 mm thick mirror polished and machine cut edgegranite stone of any colour and shade 25.1 : providing and supplying aluminium extruded tubular and other aluminium sectionsas per the architectural drawings and approved shop drawings, the aluminiumquality as per grade 6063 t5 or t6 as per bs 1474, including super durable powdercoating of 60-80 microns conforming to aama 2604 of required colour and shadeas approved by the engineer-in-charge. the item includes cost of material suchas cleats, sleeves, screws etc. necessary for fabrication of extruded aluminiumframe work. nothing extra shall be paid on this account. 25.7 : designing, fabricating, testing, installing and fixing in position curtain wall withaluminium composite panel cladding, with open grooves for linear as well ascurvilinear portions of the building, for all heights and all levels etc. including:a structural analysis & design and preparation of shop drawings for pressureequalisation or rain screen principle as required, proper drainage of water to makeit watertight including checking of all the structural and functional design.b providing, fabricating and supplying and fixing panels of aluminium compositepanel cladding in pan shape in metalic colour of approved shades made out of4mm thick aluminium composite panel material consisting of 3mm thick fr grademineral core sandwiched between two alumini um sheets each0.5mm thick. thealuminium composite panel cladding sheet shall be coil coated, with kynar500based pvdf / lumiflon based fluoropolymer resin coating of approved colourand shade on face # 1 and polymer service coating on face # 2 as specified usingstainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backerrods etc.c the fastening brackets of aluminium alloy 6005 t5 / ms with hot dip galvanisedwith serrations and serrated washers to arrest the wind load movement, fasteners, ss 316 pins and anchor bolts of approved make in ss 316, nylon separators toprevent bi-metallic contacts all complete required to perform as per specificationand drawing the item includes cost of all material & labour component, the cost ofall mock ups at site, cost of all samples of the individual components for testing inan approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wallwith aluminium composite panel cladding till the handing over of the building foroccupation. base frame work for acp cladding is payable under the relevantaluminium item.s the contractor shall provide curtain wall with aluminiumcomposite panel cladding, having all the performance characteristics all complete, as per the architectural drawings, as per item description, as specified, as per theapproved shop drawings and as directed by the engineer-in-charge.however, for the purpose of payment, only the actual area on the external face ofthe curtain wall with aluminum composite panel cladding including width ofgroove shall be measured in sqm. up to two decimal places. 13.46.1 : finishing walls with acrylic smooth exterior paint of required shade:new work two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm 9.48.2 : providing and fixing m.s. grills of required pattern in frames of windows etc. with m.s. flats, square or round bars etc. including priming coat with approved steel primer all complete.fixed to openings/ wooden frames with rawl plugs screws etc 2.6.1 : earth work in excavation by mechanical means hydraulic excavator/manual means over areas exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.all kinds of soil 10.28 : providing and fixing stainless steel grade 304 railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature wherever required and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in-charge, for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc. 16.42 : cement concrete 1:2:4 1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete od824869/2020 2021 : providing and fixing name board in granite of approved quality and size 3.sheet roofing 10.16.1 : steel work in built up tubular round, square or rectangular hollow tubes etc. trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.hot finished welded type tubes od824853/2020 2021 : roofing with g.i trafford profile sheet 0.35 mm thick, powder coated with overlaps of<br>150mm at ends and ss screws including plain washers and bitumen washers etc. complete od923561/2020 2021 : supplying and fixing 15 c. m sqaure pvc gutter including cost conveyance labour as per<br>direction from departmental officers 4.1.8 : providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size 11.37 : providing and laying ceramic glazed floor tiles of size 300x300 mm thickness to be specified by the manufacturer, of 1st quality conforming to is : 15622, of approved make, in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 1 cement : 4 coarse sand, including pointing the joints with white cement and matching pigment etc., complete. 4.maintenance 50.9.3.1 : providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including isi marked m.s. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f engineer in- charge. using anjili/ jack wood 50.9.4.1 : providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows area of opening for panel inserts excluding portion inside grooves or rebates to be measured paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality anjili/ jack wood 21.1.2.2 : for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber/ neoprene gasket required fittings shall be paid for separatelypowder coated aluminium minimum thickness of powder coating 50 micron 21.3.1 : providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer - in -charge. cost of aluminium snap beading shall be paid in basic item:with float glass panes of 4.0 mm thickness 14.54.1 : painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:one or more coats on old work 14.67.1 : finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade:old work two or more coats applied @ 1.43 ltr/10 sqm over existing cement paint surface 2.8.1 : earth work in excavation by mechanical means hydraulic excavator /manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan, including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil 4.1.8 : providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size 5.1.2 : providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:1:5:3 1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size 5.2.2 : reinforced cement concrete work in walls any thickness, including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size 5.9.1 : centering and shuttering including strutting, etc. and removal of form for:foundations, footings, bases of columns, etc for mass concrete 5.22.6 : steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo - mechanically treated bars of grade fe-500d or more 13.16.1 : 6 mm cement plaster of mix:1:3 1 cement : 3 fine sand 14.1.1 : repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:with cement mortar 1:4 1 cement : fine sand od925411/2020 2021 : providing and laying 60 mm thick factory made cement concrete interlocking paver block of m - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm metal bedding, filling the joints with fine sand etc. all complete as per the direction of engineer-in-charge.

Central Government/Public Sector

TRN :19296508 | 09 Nov, 2020

Tender Value : 0

Rajouri - Jammu And Kashmir

Tender for repair to joinery aluminum window/door pvc doors and sanitary plumbing fitting under age b/r dett iii at rajouri

State Government

TRN :19319884 | 27 Nov, 2020

Tender Value : 4.50 Lacs

Ranchi - Jharkhand

Tender for emergent required for aluminum partition work in jusnl hq. building for 1 year

State Government

TRN :19288293 | 03 Nov, 2020

Tender Value : 3.88 Lacs

Kolkata - West Bengal

Tender for structural infrastructure in front of surgical opd and medicine opd along with aluminum partition work for isolation ward and speech therapy room within baghajatin state general hospital, kolkata 700032 for covid 19, during the year 2020 21

Related Keywords : aluminum door repair

List of latest aluminum-door-repair Tenders in Indian Tenders. Click on any aluminum-door-repair Tenders to view BOQ, NIT and Tender Documents. Get Bidding Support and Vendor Registration for aluminum-door-repair Tenders.

Tender for special repair to government press colour work, door window, aluminum section window, mosquito proof net

Tender for repair to joinery aluminum window/door pvc doors and sanitary plumbing fitting under age b/r dett iii at rajouri

Tender for emergent required for aluminum partition work in jusnl hq. building for 1 year

Tender for structural infrastructure in front of surgical opd and medicine opd along with aluminum partition work for isolation ward and speech therapy room within baghajatin state general hospital, kolkata 700032 for covid 19, during the year 2020 21

Get aluminum door repair Tender Alert...

Related Keywords : aluminum door repair

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us