Filters

List of air-handling Tenders

List of latest air-handling Tenders in Indian Tenders. Click on any air-handling Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for air-handling Tenders.

All-Tenders (12)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35963422 | 05 Dec, 2025

Tender Value : 1.42 Crore

Khandwa - Madhya Pradesh

Tender for procurement of preventive maintenance spares for atlas copco make transport air compressor tac installed at ash handling plant of 2x600 mw, sstpp, mppgcl dongalia.

corporations/Associations/Others

TRN :35952511 | 18 Dec, 2025

Tender Value : 20.20 Crore

Jaipur - Rajasthan

Tender for e-bid for rate contract cum supply and empanelment of surgical items - """sterile disposable perfusion set (infusion set) with airway and needle (paediatric use) • burette type measured volume chamber of 100 ml • drop size of approx 60 drops per ml • injection port,latexfree, for intermittent medication. • floating auto shut off valve (latex free) in burette. • soft and kink resistant pvc tubing. • roller controller for flow control • tube length 150 cm • 23g needle • as per iso 8536-5"" " """sterile disposable (single use) teflon / ptfe i.v. cannula with integrated 3 way stop cock. size 20g • should be packed in transparent, single blister pack. • as per is 10555 standard"" " """sterile disposable (single use) teflon / ptfe i.v. cannula with integrated 3 way stop cock. size 22g • should be packed in transparent, single blister pack. • as per is 10555 standard"" " """sterile disposable (single use) teflon/ ptfe i.v. cannula without port. size 24g • suitable for paediatric & neonatal use • should be packed in transparent, single blister pack. • as per is 10555 standard"" " """plaster of paris bandages 15cm x 2.7mts / roll testing parameter should be followed as per bp standard"" " "urine collecting bag, disposable 2000 ml • transparent sheet • kink resistant flexible tubing not less than 90 cm in length • should have non-return valve • top drainage outlet • graduated bag • moulded handle for easy handling " "vaccum suction set, 2.5 meter length, •suction handle with suction tube •sterile,• pyrogenic free, •latex free,• single use " "vascular catheter 5fr/16g, double lumen length 50cm.usfda/four digit notified ce approved. should have two guide wire 45 cm & 80cm or more(logline iv.) peel-away sheath glide thru 5fr 10 cm, guide wire nitinol 80 cm, guide wire nitinol 45 cm, introducer needle 21 g 7 cm, syringe-10 ml luer-lock, skin protectant prep pad, second site adjustable hub, measuring tape,5 fr pressure injectable picc line with blue flex tip 50 cm, dressing statloock stabilization device " "vascular catheter 5fr/16g, double lumen length 55cm.usfda/ four digit notified ce approved, should have two guide wire 45cm & 80cm or more (logline iv.) peel-away sheath glide thru 5fr 10 cm,guide wire nitinol 80 cm,guide wire nitinol 45 cm,introducer needle 21 g7 cm, syringe-10 ml luer-lock, skin protectant prep pad, second site adjustable hub, measuring tape,5 fr pressure injectable picc line with blue flex tip 55cm, dressing statloock stabilization device (suture less) " "vascular catheter with metal guide wire,5fr triple lumen, size range 55cm or more (logline iv:) usfda/four digit notified ce approved syringe 12 ml, internal stylet, measuring tape, stat lock catheter stabilization device (suture less), introducer safety peripheral iv catheter 20g,micro introducer with vessel dilator, guide wire-50 cm nitinol, needle introducer 21 g, safety scalpel,end cap " """core biopsy instrument with compatible co-axial needle (automatic disposal ) should be bevel tip.should have adjustable penetration depth of 18mm and 25 mm with automatic and semi- automatic firing modes in single instrument/gun. should have fire ready indicator to reduce the risk of premature instrument firing.should have advanced echogenic technology for enhanced visibility in ultrasound. should be available with compatible coaxial needle in a single kit. instrument / gun size: 18 gauge, 16cm with coaxial needle size: 17 gauge, total cannula length 12.9cm."" " "disposable bone marrow biopsy needle should have ergonomic two- piece t-handle design. should have trocar tapered stylet point for easy coring of bone.should have triple crown cannula tip with 6 cutting cannula facets.should be available with marrow acquisition cradle with sample size verification marking. 11gauge, 4 inch length"" " """absorbable surgical suture (synthetic) antibacterial coated sterilised needled suture (braided coated polyglactin/ polyglycolic acid violet) 1/2 circle ct round bodied 40mm, gs needle, suture length 90 cm"" " "bed side leucodepletion filters for blood transfusion (for 2 unit of red cell) [ne32b] 1. filters should be able to leucodeplete red cells form leukocyte contamination separately for 1 unit of red cells and for 2 units of red cells each. 2. filters should be having the capacity of log 4 reduction (99.99%) 3. filters should not carry any charges it should be neutrally charged. 4. filters material should be polyester woven / non- woven. 5. leukocytes should be consistently averaging less than 0.5x105 residual leucocytes for one unit of red cell and 0.2*106 for two units of red cell. rbc recovery should be averaging more than 90%. 6. filters should have hard / soft housing for optical monitoring. 7. filtration loss should not be more than 35 ml for one unit red cell. 8. should have integrated = 40 µm, micro aggregate filter. 9. should be us fda/ european ce certified. "

State Government

TRN :35941047 | 28 Nov, 2025

Tender Value : 1.00 Crore

Bikaner - Rajasthan

Tender for dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer.cement concrete grade m-15 and above and pcc blocks clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to a lead of 50 metres from road boundary including removal and disposal of top organic soil not exceeding 150 mm in thickness as directed by engineer.in area of light jungle silt clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. sludge clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. "providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level :1:3:6 (1 cement : 3 fine/ coarse sand : 6 graded stone aggregate 20 mm nominal size). " 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : including providing /mixing of synthetic fibers compulsorily complying with is 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of cement i.e. 125 gms per 50 kg cement up to 900 gms per cum of concrete/ mortar. "reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete." centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete. wrought iron and mild steel welded work) (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately. providing and fixing of reinforced ferro-cement drain covers designed for 'a' class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted m.s. plate , rim and m.s. lifting hooks, admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc.standard size 2100x500mm (150mm thick) for span 1201 to 1500mm brick work with fps bricks of class designation 75 in foundation and plinth in:cement mortar 1:4 (1 cement : 4 coarse sand) cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand) providing and laying precast reinforced cement concrete box culvert section of m-40 grade designed for 'aa' class loading as per irc specifications including the effect of impact, eq etc. complete on firm base of 200mm thick lean concrete of m-10 grade with aggregate of size 40mm nominal of following internal sizes. the work includes required safety measures, construction of drain for diversion of flowing water, cost of design of rcc precast box and its proof checking from iit/mnit jaipur etc. complete in all respect as per specifications diversion of flowing water, cost of design of rcc precast box and its proof checking from iit/mnit jaipur etc. complete in all respect as per specifications size 2.00 m x 2.00 m providing, laying, spreading and compacting of granular sub-base by providing close graded material, mixing in a mechanical mix plant at omc, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion.grading - i material providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (wmm) base course comprising of graded stone aggregate and granular material conforming to mort&h specifications (table 400-ii) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per mort&h specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per is : 8887 and approved quality @ 0.6 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and applying tack coat on the prepared surface with bitumen emulsion as per is: 8887 and approved quality @ 0.2 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. "providing and laying 50-75 mm compacted thick design mix (approved by engineer) dense bituminous macadam on prepared surface with specified graded crushed aggregates as per table 500-9, 500-10 with bitumen binder set (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) for base/ binder course including loading of material with f.e. loader, heating and mixing of stone aggregate, filler and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control as per clause 504.3.5 to the required level and grade, compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa to achieve the desired density (approximately 2.3 tonne/cum) complete as per clause 507 of mort&h specification but excluding primer/tack coat, including all material, labour, machinery, lighting, guarding and maintenance of diversion.grade-ii with bitumen vg-grade 30 @ 4.25 %, lime filler @ 2% (percent by weight of total mix)" "providing and laying 30-45 mm compacted thickness bituminous concrete as per design mix (approved by engineer) on prepared surface with specified grade stone aggregate as per table - 500-18 with bitumen for wearing course including loading of aggregate with f.e. loader and hot mixing of stone aggregate and bitumen (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensing device (as per clause 504-3.5) to the required level and grade and compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa, to achieve the desired density complete as per clause 509 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding primer/tack coat.grade-ii with bitumen vg-grade 30 @ 6% (percent by weight of total mix)" "earth work in excavation in open area, stp, wtp, pumping station with mechanical means including dressing of sides and ramming of bottoms, including getting out the excavated material, disposal of excavated material lead upto 1000m at suitable site as per as per drawing and as per direction of engineer. (measurements for payment to be done as per standard drawings). above 3.0 m and upto 6.0 m depth" dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer. cement concrete grade m-15 and above and pcc blocks clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to a lead of 50 metres from road boundary including removal and disposal of top organic soil not exceeding 150 mm in thickness as directed by engineer.in area of light jungle silt clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. sludge clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. "providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level : 1:3:6 (1 cement : 3 fine/ coarse sand : 6 graded stone aggregate 20 mm nominal size). " 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) brick work with fps bricks of class designation 75 in foundation and plinth in: cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand) reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : including providing /mixing of synthetic fibers compulsorily complying with is 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of cement i.e. 125 gms per 50 kg cement up to 900 gms per cum of concrete/ mortar. "reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete." centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete. wrought iron and mild steel welded work) (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately. providing and fixing of reinforced ferro-cement drain covers designed for 'a' class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted m.s. plate , rim and m.s. lifting hooks, admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc.standard size 2100x500mm (150mm thick) for span 1201 to 1500mm dismantling of flexible pavements for sewer line and manholes and disposal of dismantled materials up to a lead of 50 metres as directed by engineer including allowances for any additional dismantling beyond the drawings (measurement for payment to be as per standard drawings), re-handling of material/earth to complete the task. bituminous courses granular courses "providing, laying, spreading and compacting of granular sub-base by providing close graded material, mixing in a mechanical mix plant at omc, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion. grading - i material" providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (wmm) base course comprising of graded stone aggregate and granular material conforming to mort&h specifications (table 400-ii) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per mort&h specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and applying tack coat on the prepared surface with bitumen emulsion as per is: 8887 and approved quality @ 0.2 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery lighting, guarding and maintenance of diversion. providing and laying 50-75 mm compacted thick design mix (approved by engineer) dense bituminous macadam on prepared surface with specified graded crushed aggregates as per table 500-9, 500-10 with bitumen binder set (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) for base/ binder course including loading of material with f.e. loader, heating and mixing of stone aggregate, filler and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control as per clause 504.3.5 to the required level and grade, compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa to achieve the desired density (approximately 2.3 tonne/cum) complete as per clause 507 of mort&h specification but excluding primer/tack coat, including all material, labour, machinery, lighting, guarding and maintenance of diversion. grade-ii with bitumen vg-grade 30 @ 4.25 %, lime filler @ 2% (percent by weight of total mix) providing and laying 30-45 mm compacted thickness bituminous concrete as per design mix (approved by engineer) on prepared surface with specified grade stone aggregate as per table - 500-18 with bitumen for wearing course including loading of aggregate with f.e. loader and hot mixing of stone aggregate and bitumen (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensing device (as per clause 504-3.5) to the required level and grade and compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa, to achieve the desired density complete as per clause 509 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding primer/tack coat. grade-ii with bitumen vg-grade 30 @ 6% (percent by weight of total mix)

Central Government/Public Sector

TRN :35931158 | 11 Dec, 2025

Tender Value : 0

Visakhapatnam - Andhra Pradesh

Tender for gem bids for air handling unit qty 11981 cmh training charges as per para 1(ad) of atc type testing charges (if any)

corporations/Associations/Others

TRN :35934607 | 01 Dec, 2025

Tender Value : 35.01 Lacs

Khordha - Orissa

Tender for gem bids for gardening, gardening service, extra man unskilled, hiring ofunskilled manpower, hiring of manpower-semiskilled, hiring of tractor material handling, cutting and disposal of grass, maintenance oflawn garden, fruit trees plant, cow dung manureqty 1 tractor, hand wash refill neo neem cap 5lt, kerosene valve salvaging, naphthalene sply 100mg each, floor cleaner, liquid cap 5lt lizol, cleaner harpic qty 1lt, bathroom cleaning, supplyof bleaching powder, glass cleaner colin 500ml, broom, room freshner genral consumables, airfreshener ball packet odonil

Central Government/Public Sector

TRN :35902754 | 08 Dec, 2025

Tender Value : 0

Uttara Kannada - Karnataka

Tender for gem bids for repair and overhauling service - repair of aircraftmechanical handling system mototok; repair ofaircraft mechanical handling system mototok; yes;buyer premises /

Central Government/Public Sector

TRN :35902891 | 05 Dec, 2025

Tender Value : 0

Multi Location - Multi State

Tender for gem bids for electrical tow/tug for aircraft ground handling

Central Government/Public Sector

TRN :35882736 | 04 Dec, 2025

Tender Value : 0

New Delhi - Delhi

Tender for gem bids for electrical tow/tug for aircraft ground handling

Central Government/Public Sector

TRN :35874537 | 29 Nov, 2025

Tender Value : 0

Mumbai - Maharashtra

Tender for dismantling, cleaning, assembly, testing, painting & handling of air brake components of icf coaches.

State Government

TRN :35855148 | 28 Nov, 2025

Tender Value : 44.00 Lacs

New Delhi - Delhi

Tender for supply, installation, testing, commissioning of air handling units at various locations at nipgr

Related Searched Keywords : air handling

List of air-handling Tenders

Tender for procurement of preventive maintenance spares for atlas copco make transport air compressor tac installed at ash handling plant of 2x600 mw, sstpp, mppgcl dongalia.

Tender for gem bids for air handling unit qty 11981 cmh training charges as per para 1(ad) of atc type testing charges (if any)

Tender for gem bids for repair and overhauling service - repair of aircraftmechanical handling system mototok; repair ofaircraft mechanical handling system mototok; yes;buyer premises /

Tender for gem bids for electrical tow/tug for aircraft ground handling

Tender for gem bids for electrical tow/tug for aircraft ground handling

Tender for dismantling, cleaning, assembly, testing, painting & handling of air brake components of icf coaches.

Tender for supply, installation, testing, commissioning of air handling units at various locations at nipgr

Get air handling Tender Alert...

Related Searched Keywords : air handling

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us