Filters

List of a-h-u Tenders

List of latest a-h-u Tenders in Indian Tenders. Click on any a-h-u Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for a-h-u Tenders.

All-Tenders (3616)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49056710 | 16 May, 2025

Tender Value : 2.98 Lacs

Nabagram - West Bengal

Tender for repairing and renovation of bilbari high madrasah h.s. under nabagram development block.

Government Departments

TRN :49056712 | 28 May, 2025

Tender Value : 28.00 Lacs

Panchkula - Haryana

Tender for tender for the supply, installation and commissioning spinal surgery instruments on 2 years rate contract as mentioned against item in schedule of requirement.---1 adson retractor hinged arms 330mm, blunt prongs 32 mm 2 2 anterior vertebral body spreader, 110 mm wide, total opening 70 mm, depth of shank 60 mm 3 lamina spreader, curved bar ratchet 280 mm, prong 7 mm total opening 65 mm 2 4 cervical spreader, ring handles, 165mm, total opening 15 mm 2 5 kerrison punch up cutting 45 degree 8 inch 1 mm 2 6 kerrison punch up cutting 45 degree 8 inch 2 mm 2 7 kerrison punch up cutting 45 degree 8 inch 3 mm 2 8 kerrison punch up cutting 45 degree 8 inch 4 mm 2 9 kerrison punch up cutting 45 degree 8 inch 5 mm 2 10 kerrison punch down cutting 90 degree 8 inch 2 mm 2 11 disc forceps straight 7 inch x 1 mm 2 12 disc forceps straight 7 inch x 2 mm 2 13 disc forceps straight 7 inch x 4 mm 2 14 bone curette angled 2 mm 2 15 bone curette angled 3 mm 2 16 american curette bayonet shaped shaft angled backward, rigid shaft working end 140 x 1 mm 1 17 american curette bayonet shaped shaft angled backward, rigid shaft working end 140 x 2 mm 1 18 smith peterson osteotome 8” straight 6 mm 1 19 smith peterson osteotome 8” curved 6 mm 1 20 dahmen osteotome straight 300 mm 8 mm 1 21 o’brien, special chisel, blade 11x11 mm, 350 mm 1 22 ohl elevator 7 inch , double ended 6 mm semi sharp end and 5 mm sharp end 2 23 kleinert kutz elevator and dissector 195 mm, 2 mm x 3 mm sharp ends 2 24 double end dissector 5 mm x 4.5 mm blunt end 1 25 micro nerve hook blunt , angled 90 x 3 mm 1 26 micro nerve hook blunt , angled 90 x 4 mm 1 27 suction tube with olive hose, angled, dia 2.5 mm 230 mm 1 28 suction tube angled with finger-cut-off, dia 3 mm 260 mm 29 cobb spinal elevator with wooden handle 31 cm length with 13 mm elevator. 1 15 | p a g e 30 suction tube angled with finger-cut-off, dia 6 mm and stylet 140 mm 1 31 gelpi spreader 210 mm with prong length 65 mm 1 32 anterior vertebral body retractor set (blades sizes 27, 22, 17 mm wide 2 level pronged blade, 27,22,17 mm wide 2 level blade, blade inserter clamp, full jointed retractor arms) 1 33 micro discectomy retractor complete set (lateral blades sizes depth 40 to 70 mm, specula depth 40 to 70 mm, counter ejector frame, blade ejector forceps) 1 34 tissue retractor 150 mm length 45 mm diameter 1 35 laminectomy retractor set (16 mm wide blade with depth from 35 mm to 60 mm, 16 mm pronged blade with depth from 35 mm to 60 mm) 1 36 ruskin bone rongeur, double action, slightly curved, jaw width 2x4 mm, length 230 mm 1 37 mcindoe bone cutter 178 mm angled delicate blades 1 38 marquartt bone rongeur, jaw angled forward, parallel cut 240 mm 1 39 scaglietti bone rongeurangled, double action, jaw anged forward, handle curved to left, jaw width 6mm, length 250 mm 1 40 scaglietti bone rongeur curved, double action, jaw anged forward, handle curved to left, jaw width 6mm, length 250 mm 1 41 scaglietti bone rongeurupward, double action, jaw anged forward, jaw width 5 mm, length 250 mm 1 42 scaglietti bone rongeur fine, double action, slightly curved jaw width 3.5 mm x 5 mm, handle angled slightly to side 240 mm 43 leksell-stille bone rongeur double action , jaw curved to side , jaw width 4x6 mm 235 mm 1 44 dalle-leksell bone rongeur extra long double action, extra long handle , jaw angled slightly to side 360 mm 45 kerrison punch ronguer curved 90 degree 1 mm and 2 mm 2 46 bone curette straight 2 mm with 26 mm overall length with 13 mm handle length 1 47 bone curette straight 3 mm with 26 mm overall length with 13 mm handle length 1 48 bone curette straight 4 mm with 26 mm overall length with 13 mm handle length 1 49 lexar chisel 10 mm with 8 3/4 inches length 2 50 lexar chisel 5 mm with 8 3/4 inches length 2 51 bone impacter rectangular tip 10x15 mm, 350 mm length 1 52 bone punch straight, length 300 mm with serrated tip 5 mm 2 53 bone punch straight, length 300 mm with serrated tip 8 mm 2 54 nerve root reractor blade size 5.5x6 mm with retro curve, length 210 mm 2 55 love nerve root retractro 45 degree angled 2 56 love nerve root retractro 90 degree angled 2 57 nerve spatula with aspirating cannula 4 mm 1 58 nerve spatula with aspirating cannula 7 mm 1 59 howarth elevator 21.5 cm length 2 60 stilleliston bone cutting , forceps angled, 267 mm 2 61 wilson frame radiolucent 1 62 micro adson forcep non tooth 12 cm 2 63 micro adson forcep tooth 12 cm 2 64 needle holder 6 inch 4 65 needle holder 4 inch 2 66 metzenbaum scissors 4 inch 3 67 metzenbaum scissors 6 inch 2 68 autoclavable storage box

State Government

TRN :49056716 | 15 May, 2025

Tender Value : 10.95 Lacs

Chaibasa - Jharkhand

Tender for construction of 125 x 115 mm dia, 90 mtr. extra deep drilled tube well with installation of india mark ii (is:15500 part-2/2004) hand pump with platform and drain for eco development village gua forest area under d.w.& s. division, chaibasa for the year 2025-26 (deposit head)

State Government

TRN :49056717 | 23 May, 2025

Tender Value : 0

Kolkata - West Bengal

Tender for supply, delivery & installation of submersible pumping machinery and other electrical / mechanical equipment etc. including allied works for sibaichandi water supply scheme, t.w. no. v & vi, block: dhaniakhali, district - hooghly under electrical division, phe dte.-1 part-a supply and delivery at site submersible pumping machinery directly coupled with wet winding type submersible motor having the following specification pump.duty condition :36 cu.mtrhead :58 mtr.motor : submersible type 3 ph. 50 hz. 400v + 10%, mos:- star deltaimpeller : gm/ ss/ cromesteelmotor winding : wet type.pump outlet - 65/75/100 mm.(test certificate, warranty certificate along with characteristic curve should be submitted at the time of delivery.) 2 supply and delivery at site the following:-upvc 80 mm dia column pipewith both side square threaded (8 tpi)with one socket and o ring biax technology with wiring lock system non corrosive,high tensile having iso 9001 standard. 3 i)3 mtr. long. 4 ii) 1.5 mtr. long 5 iii) 80 mm dia top & bottom adaptor 6 100 mm x 80 mm dia gi reducer 7 supply and delivery at site heavy type suitable dia m.s. suspension clamp for above column pipe along with nuts, bolts and washers etc. 8 supply and delivery at site 80 mm. dia cidf sluice valve- 1 no., 80mm non return valve (swing type - 1 no.) pn - 1.0,80mm ms heavy flange - 1 no., cidf bend 90o - 1 no., cidf / ms (heavy) short piece as required length, 80mm cidf tee - 1 no., reducer, nut bolt and other ci / ms specials etc. as required as per i.s. specification and other required materials for the job i.e. for making complete construction of delivery and wash out lineas per relavant i.s. (test certificate for valve should be submitted at the time of delivery). 9 supply and delivery at site split type m.s. fabricated suitable tubewell cover for the tubewell housing with necessary clamping arrangement including holes for column pipe, air pipe and cable entry etc. 10 supply and delivery at site depth gauge (make : h. guru) 102 mm dia. with steel airbreak pipe required length with all other fittings and accessories for the work including supplying on the good quality hand pump of approve make 11 supply and delivery at site pressure gauge 102 mm. dia and 7 kg. /cm2 range, brass cocks and fitting complete(h.guru) 12 supply and delivery at site 4 sq. mm. 3 core copper 1.1 kv grade pvc insulated water proof flat submersible cable. 13 making safety device for above pump by supplying 3 nos. suitable size ms clamp/ ms cage and 1 dia nylon rope of required length including supplying nuts, bolts, and other materials as per direction. 14 supply & delivery of double flanged three phase 50 hz quarter turn electrical actuator [gear case lubrication : sp68 is:13095, torch switches: 2 x 1 no / 1 nc changeover contact, positional limit switches: 2 x 1 no / 1 nc changeover contacts] operated flange type butterfly valve (pn - 1.0) 80 mm. dia with mechanical position indicator, ci body & disk - is: 210 gr. fg 260, shaft of stainless steel aisi 410 as per bs 5155 ip - 68 / s-2,(test certificate should be submitted at the time of delivery) 15 supply & delivery of 415 v mcc cum pdb. with minimum 2mm thickness and degree of protection ip - 54, conforming to is-8623 withsuitable bus bar, digital voltmeter ammeter, contactor, delay timer, mcb, valve actuator starter etc. with plc logic & ups as detailed in annexure - i7.5 -12.5 hp with sds (star delta starter)panel make : digitek / rnr industries /pce projects / opg power system / ecs.[tc / gc to be submitted along with panel after approval of detail power and control circuit drawing by eic]. 16 supply & delivery of 35 sq. mm. 3 1/2 core pvc insulatedal. armoured cable (1.1 kv grade), is 1554 (part - i) / is 7098 (part-i) make : incab /gloster / nicco / polycab / crystal. 17 supply & delivery of 100 amp. 440 v, 50 hz. tpn main switch with rewireable type fuse link 18 supply & delivery of 100 amp. industrial copper busbar 19 supply & delivery of 4 pole 100 amp changeover unit 20 supply & delivery of 100 amp 4 pole mccb with adjustable overload and adjacent short circuit protection including enclosures. 21 supply & delivery at site of 25 kva, 3 phase oil cooled type servo motor operated wound line voltage corrector conforming to is-9815 [pt-i] 1994 suitable for unbalanced input voltage.input voltage: 3 phase main supply phase to phase 200v-500v 3 servo motor in 3 phase with all protection by mcb (make- abb / siemens/ l&t)output voltage: 3 phase balanced output phase to phase 415v + 1% (test certificate & warranty certificate should be submitted at the time of delivery) 22 supply and delivery of automatic plunger type chlorinator for feeding accurately automatic controlled dosage of chlorine solution into the water by connecting metering pump with flow rate of water 0-100 ltr/hr. with maximum pressure of 10 kg./cm2 suitable dosing pump and other necessary accessories on the delivery pipe line as required. the pump shall be coupled with 1/2 hp motor having 3 phase power and 1440 rpm (+4%).(test certificate will be submitted at the time of delivery) 23 part-binstallation of pumping machinery with valves, pipe & pipe specials, sort piece, presurre gauge including hoisting of column pipe making all electrical and water line interconnection complete as per direction including supply of necessary materials as required for the work. 24 making of tubewell foundation (size- 3x 3x 3.5 approx) as per site situation including supply of necessary materials as bricks, sand, cement, stone chips etc. with plastering & neat cement finishing to complete as per direction. 25 installtion of panel & actuator operated ci butterfly valvewith supply of 12 core 2.5 sq. mm. copper control cable, compensating ms flange, nuts, bolts gasket and other fixing materials as required to complete the job including necessary making of brick pillar as per site situation with supply of necessary materials like bricks, sand, cement, stone chips etc. with plastering & neat cement finishing in all respect including successfull operation along with testing of the whole installation as per entire satisfaction of eic. 26 installation with testing and commissioning of the voltage stabilizer with necessary foundation along with necessary accessories in the suitable position and drawing cable with ms shaddle, making all electrical connection including socketing, crimping to complete the work as per direction. 27 installation of above supplied chlorinator pump set and drawing of power line by supplying of necessary wire and continuous earthing connected to auto/ manual panel. this includes the cost of making necessary brick foundation base with neat cement finish by supplying all requered materials and testing entire set as per direction of eic 28 making internal electrification with 16amp main switch/mcb (make: havells/ any approved) by 1.5 sq.mm frlsh grade copper pvc insulated single core multistrand wire (make: havells/ mescab/ finolex/ any approved) in pvc casing of pump house consisting of 2 nos. bracket point, 1 no. tube light point, 1 no. bulk head point and 1 no. five pin 5 amp. socket point, 1 no. ceiling fan point with controlling switches including supply of 2 nos. bracket with 12w led lamp, 1 no. 20 watt led tube light set, 1 no. outdoor type bulk head with 9w led lamp and drawing of necessary earthing (1.0 sq.mm) material all complete as per direction eic. (led light make: philips/ havells/ any approved) 29 supply and fitting fixing of 45 watt. x 2 nos. led light set [make - philips, model: brp031 led45 cw slr gr psu] with 2 nos 40 mm dia 1.5 mtr. long g.i pipe bracket fixed on the roof of the pump house with properly grout including making power connection by 2 x 1.5 sq. mm copper fr grade flexible wire through pvc casing/conduit with drawing earth conductor (1.0 sq mm copper flexible wire), fitting fixing of 15 amp switch on board with all complete as per direction of eic. 30 earthing confirming to is: 3043 by 50mm dia gi pipe 3.64mm thick x 3.04m long and 1 x 4 swggi (hot dip) wire (4 mts. long), 13mm dia x 80mm long gi bolts, double nuts, double washers including supply & fixing of 15mm dia gi pipe protection (1 mtr long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 mtrs below the ground level and restoring surface duly rammed as below. a) for soft soilby tata - medium gi pipe 31 drawing earth by m.s. flat strip (20mm x 3mm) fromearth bus / electrode to above differentcomponents as per i.e. rules and as per direction of eic. 32 supply & fitting fixing of 100 amp. kit kat (3 nos.)(make : havells) with required size wooden board mounted on wall. 33 supply, delivery & fitting fixing of 48 sweep 230 volt, 50 hz, ac ceiling fan (make : havells/ cg/ approved make) including fitting fixing on ceiling and making electrical connection complete. 34 supply & delivery at site 2 nos. plastic chair & 1 no. plastic table (make: cello / supreme / nilkamal) 35 trial operation and guarding of whole installationas per departmental requirement and guideline 1 no. operator @ 465/- per day with 8.33% bonus. [as per existing departmental terms & conditions]

State Government

TRN :49056720 | 15 May, 2025

Tender Value : 3.50 Lacs

24 Paraganas North - West Bengal

Tender for construction of pucca drain from the h/o of sunil ghosh at boilgachi under rajibpur bira gp of habra-ii panchayat samity under 15th fc tied fund 2024-25 activity code -124221616.

State Government

TRN :49056725 | 23 May, 2025

Tender Value : 0

Kolkata - West Bengal

Tender for supply, delivery & installation of submersible pumping machinery and other electrical / mechanical equipment etc. including allied works for amodghata water supply scheme, t.w. no. vi, block: chinsura mogra, district - hooghly under electrical division, phe dte.- 1 part-a supply and delivery at site submersible pumping machinery directly coupled with wet winding type submersible motor having the following specification pump.duty condition :36 cu.mtrhead :58 mtr.motor : submersible type 3 ph. 50 hz. 400v + 10%, mos:- star deltaimpeller : gm/ ss/ cromesteelmotor winding : wet type.pump outlet - 65/75/100 mm.(test certificate, warranty certificate along with characteristic curve should be submitted at the time of delivery.) 2 supply and delivery at site the following:-upvc 80 mm dia column pipewith both side square threaded (8 tpi)with one socket and o ring biax technology with wiring lock system non corrosive,high tensile having iso 9001 standard. 3 i)3 mtr. long. 4 ii) 1.5 mtr. long 5 iii) 80 mm dia top & bottom adaptor 6 100 mm x 80 mm dia gi reducer 7 supply and delivery at site heavy type suitable dia m.s. suspension clamp for above column pipe along with nuts, bolts and washers etc. 8 supply and delivery at site 80 mm. dia cidf sluice valve- 1 no., 80mm non return valve (swing type - 1 no.) pn - 1.0,80mm ms heavy flange - 1 no., cidf bend 90o - 1 no., cidf / ms (heavy) short piece as required length, 80mm cidf tee - 1 no., reducer, nut bolt and other ci / ms specials etc. as required as per i.s. specification and other required materials for the job i.e. for making complete construction of delivery and wash out lineas per relavant i.s. (test certificate for valve should be submitted at the time of delivery). 9 supply and delivery at site split type m.s. fabricated suitable tubewell cover for the tubewell housing with necessary clamping arrangement including holes for column pipe, air pipe and cable entry etc. 10 supply and delivery at site depth gauge (make : h. guru) 102 mm dia. with steel airbreak pipe required length with all other fittings and accessories for the work including supplying on the good quality hand pump of approve make 11 supply and delivery at site pressure gauge 102 mm. dia and 7 kg. /cm2 range, brass cocks and fitting complete(h.guru) 12 supply and delivery at site 4 sq. mm. 3 core copper 1.1 kv grade pvc insulated water proof flat submersible cable. 13 making safety device for above pump by supplying 3 nos. suitable size ms clamp/ ms cage and 1 dia nylon rope of required length including supplying nuts, bolts, and other materials as per direction. 14 supply & delivery of double flanged three phase 50 hz quarter turn electrical actuator [gear case lubrication : sp68 is:13095, torch switches: 2 x 1 no / 1 nc changeover contact, positional limit switches: 2 x 1 no / 1 nc changeover contacts] operated flange type butterfly valve (pn - 1.0) 80 mm. dia with mechanical position indicator, ci body & disk - is: 210 gr. fg 260, shaft of stainless steel aisi 410 as per bs 5155 ip - 68 / s-2,(test certificate should be submitted at the time of delivery) 15 supply & delivery of 415 v mcc cum pdb. with minimum 2mm thickness and degree of protection ip - 54, conforming to is-8623 withsuitable bus bar, digital voltmeter ammeter, contactor, delay timer, mcb, valve actuator starter etc. with plc logic & ups as detailed in annexure - i7.5 -12.5 hp with sds (star delta starter)panel make : digitek / rnr industries /pce projects / opg power system / ecs.[tc / gc to be submitted along with panel after approval of detail power and control circuit drawing by eic]. 16 supply & delivery of 35 sq. mm. 3 1/2 core pvc insulatedal. armoured cable (1.1 kv grade), is 1554 (part - i) / is 7098 (part-i) make : incab /gloster / nicco / polycab / crystal. 17 supply & delivery of 100 amp. 440 v, 50 hz. tpn main switch with rewireable type fuse link 18 supply & delivery of 100 amp. industrial copper busbar 19 supply & delivery of 4 pole 100 amp changeover unit 20 supply & delivery of 100 amp 4 pole mccb with adjustable overload and adjacent short circuit protection including enclosures. 21 supply & delivery at site of 25 kva, 3 phase oil cooled type servo motor operated wound line voltage corrector conforming to is-9815 [pt-i] 1994 suitable for unbalanced input voltage.input voltage: 3 phase main supply phase to phase 200v-500v 3 servo motor in 3 phase with all protection by mcb (make- abb / siemens/ l&t)output voltage: 3 phase balanced output phase to phase 415v + 1% (test certificate & warranty certificate should be submitted at the time of delivery) 22 supply and delivery of automatic plunger type chlorinator for feeding accurately automatic controlled dosage of chlorine solution into the water by connecting metering pump with flow rate of water 0-100 ltr/hr. with maximum pressure of 10 kg./cm2 suitable dosing pump and other necessary accessories on the delivery pipe line as required. the pump shall be coupled with 1/2 hp motor having 3 phase power and 1440 rpm (+4%).(test certificate will be submitted at the time of delivery) 23 part-binstallation of pumping machinery with valves, pipe & pipe specials, sort piece, presurre gauge including hoisting of column pipe making all electrical and water line interconnection complete as per direction including supply of necessary materials as required for the work. 24 making of tubewell foundation (size- 3x 3x 3.5 approx) as per site situation including supply of necessary materials as bricks, sand, cement, stone chips etc. with plastering & neat cement finishing to complete as per direction. 25 installtion of panel & actuator operated ci butterfly valvewith supply of 12 core 2.5 sq. mm. copper control cable, compensating ms flange, nuts, bolts gasket and other fixing materials as required to complete the job including necessary making of brick pillar as per site situation with supply of necessary materials like bricks, sand, cement, stone chips etc. with plastering & neat cement finishing in all respect including successfull operation along with testing of the whole installation as per entire satisfaction of eic. 26 installation with testing and commissioning of the voltage stabilizer with necessary foundation along with necessary accessories in the suitable position and drawing cable with ms shaddle, making all electrical connection including socketing, crimping to complete the work as per direction. 27 installation of above supplied chlorinator pump set and drawing of power line by supplying of necessary wire and continuous earthing connected to auto/ manual panel. this includes the cost of making necessary brick foundation base with neat cement finish by supplying all requered materials and testing entire set as per direction of eic 28 making internal electrification with 16amp main switch/mcb (make: havells/ any approved) by 1.5 sq.mm frlsh grade copper pvc insulated single core multistrand wire (make: havells/ mescab/ finolex/ any approved) in pvc casing of pump house consisting of 2 nos. bracket point, 1 no. tube light point, 1 no. bulk head point and 1 no. five pin 5 amp. socket point, 1 no. ceiling fan point with controlling switches including supply of 2 nos. bracket with 12w led lamp, 1 no. 20 watt led tube light set, 1 no. outdoor type bulk head with 9w led lamp and drawing of necessary earthing (1.0 sq.mm) material all complete as per direction eic. (led light make: philips/ havells/ any approved) 29 supply and fitting fixing of 45 watt. x 2 nos. led light set [make - philips, model: brp031 led45 cw slr gr psu] with 2 nos 40 mm dia 1.5 mtr. long g.i pipe bracket fixed on the roof of the pump house with properly grout including making power connection by 2 x 1.5 sq. mm copper fr grade flexible wire through pvc casing/conduit with drawing earth conductor (1.0 sq mm copper flexible wire), fitting fixing of 15 amp switch on board with all complete as per direction of eic. 30 earthing confirming to is: 3043 by 50mm dia gi pipe 3.64mm thick x 3.04m long and 1 x 4 swggi (hot dip) wire (4 mts. long), 13mm dia x 80mm long gi bolts, double nuts, double washers including supply & fixing of 15mm dia gi pipe protection (1 mtr long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 mtrs below the ground level and restoring surface duly rammed as below. a) for soft soilby tata - medium gi pipe 31 drawing earth by m.s. flat strip (20mm x 3mm) fromearth bus / electrode to above differentcomponents as per i.e. rules and as per direction of eic. 32 supply & fitting fixing of 100 amp. kit kat (3 nos.)(make : havells) with required size wooden board mounted on wall. 33 supply, delivery & fitting fixing of 48 sweep 230 volt, 50 hz, ac ceiling fan (make : havells/ cg/ approved make) including fitting fixing on ceiling and making electrical connection complete. 34 supply & delivery at site 2 nos. plastic chair & 1 no. plastic table (make: cello / supreme / nilkamal) 35 trial operation and guarding of whole installationas per departmental requirement and guideline 1 no. operator @ 465/- per day with 8.33% bonus. [as per existing departmental terms & conditions] 36 add: 18% gst 37 add: 1% cess

Government Departments

TRN :49056727 | 05 Jun, 2025

Tender Value : 5.95 Lacs

Purulia - West Bengal

Tender for group maintenance of different buildings i.e, the office building of purulia highway division, purulia highway sub-division, balarampur highway sub-division and manbazar highway sub-division and inspection bungalow under purulia highway division .

Government Departments

TRN :49056734 | 02 Jun, 2025

Tender Value : 0

24 Paraganas North - West Bengal

Tender for annual maintenance of wics, wifs with dg sets and svs present in different point under state family welfare bureau, west bengal.- 1 walk-in-cooler (wic)-hurre / yorco / blue star / fridge king / spencers / marken / foster / zenotti / other makes 2 walk-in-freezer (wif)- huree / blue star/ zenotti / marken / spencers / other makes 3 diesel generator sets :- rating = 7.5 kva (ashoke leyland / kirloskar / mahindra & mahindra / escort / other make) 4 diesel generator sets :- 7.5 kva < rating = 15 kva (ashoke leyland / kirloskar / mahindra & mahindra / escort / other make) 5 diesel generator sets :- 15 kva < rating = 25 kva (ashoke leyland / kirloskar / mahindra & mahindra / escort / other make) 6 servo voltage stabilizers :-rating = 7.0 kva (sen & pandit /infratel / mark en / other make) 7 servo voltage stabilizers :-7.0 kva < rating = 10 kva (sen & pandit /infratel / mark en / other make) 8 servo voltage stabilizers :-10 kva < rating = 20 kva (sen & pandit /infratel / mark en / other make) 9 total price of spares & repairing

State Government

TRN :49056761 | 15 May, 2025

Tender Value : 33.50 Lacs

Aligarh - Uttar Pradesh

Tender for tender for patch repair work on village roads of block- gangiri. - collection of 22.4-53 mm size stone ballast of approved quarry (m/c) duly stacked at site true to template, including its cartage, loading & unloading and including all taxes & royalty. required for completion of the work as per direction of engineer-in-charge. (including cost of all material, labour, t&p, labour cess but excluding g.s.t.) 2 collection of crushable type/ stone dust of approved quarry duly stacked at site trueto template,including its cartage, loading & unloading and including all taxes & royalty. required for completion of the work as per direction of engineer-in-charge. (including cost of all material, labour, t&p, labour cess but excluding g.s.t.) 3 consolidation of 22.4-53 mm size stone ballast in filling pot holes and undulation including opening out stacks, spreading in existing surface. making medhi to retain water and lead up to 200 meter and also including hire charge of road roller & its fuel charges etc.binding material as crushable type screening/stone dust and water allowance used with consolidation.required for completion of the work as per direction of engineer-in-charge. ch-20, s.i. 755 a (including cost of all material, labour, t&p, labour cess but excluding g.s.t.) 4 repair to pot holes and removal of loose material, trimming of sides, cleaning of surface by providing tack coat, 20 mm thick pre-mix carpet and seal coat type b specificationclause 1904.2 (including cost of all material, bitumen vg-10, labour, t&p, labour cess but excluding g.s.t.)

Central Government/Public Sector

TRN :49056766 | 22 May, 2025

Tender Value : 1.20 Crore

Sonbhadra - Uttar Pradesh

Tender for bids are invited for facility management services - lumpsum based - industrial; running and maintenance including providing breakfast meals and catering services and also including cleaning of utensils house keeping of transit camp jr transit camp and transit homes at ka.. total quantity :

Related Searched Keywords : a h u

List of a-h-u Tenders

Tender for repairing and renovation of bilbari high madrasah h.s. under nabagram development block.

Tender for construction of 125 x 115 mm dia, 90 mtr. extra deep drilled tube well with installation of india mark ii (is:15500 part-2/2004) hand pump with platform and drain for eco development village gua forest area under d.w.& s. division, chaibasa for the year 2025-26 (deposit head)

Tender for construction of pucca drain from the h/o of sunil ghosh at boilgachi under rajibpur bira gp of habra-ii panchayat samity under 15th fc tied fund 2024-25 activity code -124221616.

Tender for group maintenance of different buildings i.e, the office building of purulia highway division, purulia highway sub-division, balarampur highway sub-division and manbazar highway sub-division and inspection bungalow under purulia highway division .

Get a h u Tender Alert...

Related Searched Keywords : a h u

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us