Filters

List of non-classified Tenders

List of latest non-classified Tenders in Indian Tenders. Click on any non-classified Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for non-classified Tenders.

All-Tenders (101)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35220843 | 09 Sep, 2025

Tender Value : 0

Kutch - Gujarat

Tender for gem bids for self adhesive flags v2 q4, gel pen v3 q4, highlighter pen q4, drawing pins v2 as per is 5205 q4, desk pads - writing v2 q4, register v2 q4, packaging tape q4, ball point pens v2 as per is 3705q4, markers for white board v2 q4, glue stick v2q4, sparkle sheet v2 q4, black lead pencils v2 asper is 1375 q4, metric steel scales v2 as per is 1481q4, tags for files v2 as per is 8499 q4, eraser q4, stamp - pad ink as per is 393 q4, pins, paper, straight asper is 5653 q4, pen or pencil holders v2 q4, pincushions q4, stapler pin / staples v2 q4, bindingcovers q4, laminating pouch q4, stamp pads q4, packing list envelope v2 q4, double sided tape q4, clips, paper as per is 5650 q4, school chalks, moulded, white as per is 2694 q4 * * // ./ ./ % %/years of past experience required forsame/similar service3 year s 1 1 6 76 7 / mseexemption for years of experienceyes | complete 1 1 & % & % 6 76 7 / startupexemption for years of experienceyes | complete 8 8 & & /document requiredfrom sellerexperience criteria, past performance, bidder turnoverin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer : /bid number: gem/2025/b/6605320; /dated: 25-08-2025 & & / bid document1 / 21 b b d d e e ; ; & d & d f f d d ; ; h h? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in -- k k * 8 8 : : / minimum number ofbids required to disable automatic bidextension1; d; d : :, , . . -- / / number of days for which bidwould be auto--extended7 6 % 6 % /past performance50 % p %p % ;8 ;8 ; ; /bid to ra enabledyesp %p % q q /ra quali cation ruleh1-highest priced bid elimination 6 6 /type of bidtwo packet bid6 6 s s /primary product categoryball point pens v2 as per is 3705 t t & v & v /time allowed for technicalclarifications during technical evaluation2 days / / k k w w / / 6 6 / % % f d f d e e /inspection required byempanelled inspection authority / agenciespre-registered with gemno t t w w /evaluation methodtotal value wise evaluation y & y & /arbitration clauseno /mediation clauseno //bid details /emd detail k /requiredno /epbg detail k /requiredno /splitting ; / bid splitting not applied.2 / 21 /mii purchase preference /mii purchase preferenceno /mse purchase preference /mse purchase preferenceyes1. if the bidder is a micro or small enterprise as per latest orders issued by ministry of msme, the bidder shall beexempted from the eligibility criteria of experience criteria as defined above subject to meeting of quality andtechnical specifications. the bidder seeking exemption from experience criteria, shall upload the supportingdocuments to prove his eligibility for exemption.2. if the bidder is a dpiit registered startup, the bidder shall be exempted from the the eligibility criteria ofexperience criteria as defined above subject to their meeting of quality and technical specifications. the bidderseeking exemption from experience criteria, shall upload the supporting documents to prove his eligibility forexemption. 3. experience criteria: in respect of the filter applied for experience criteria, the bidder or its oem of the productoffered in the bid themselves or through resellers should have regularly, manufactured and supplied same or

Central Government/Public Sector

TRN :35220918 | 15 Sep, 2025

Tender Value : 0

Noida - Uttar Pradesh

Tender for gem bids for chemicals, naphthalene balls, zip lock bag, nitrile gloves powder free, blotting sheets, illustration pen, tracing paper, steeltray, aluminium foil, casettes for embedding, laboratorytray, dissecting needle, brush, dissecting foreceps, splinter forceps, slides, weighing bottle, measuringcylinder, watch glass, glass jar, transparent autoclavable, tba, glycerine, dpx, mercuric chloride, safranin, fastgreen, xylene, formaldehyde

Central Government/Public Sector

TRN :35223133 | 17 Sep, 2025

Tender Value : 0

Tiruchirappalli - Tamil Nadu

Tender for supply of modified packing gland part finished for piston rod.

Central Government/Public Sector

TRN :35223521 | 15 Sep, 2025

Tender Value : 39.8 Thousand

Sonebhadra - Uttar Pradesh

Tender for gem bids for packing gland graphited 14 mm

State Government

TRN :35225098 | 06 Sep, 2025

Tender Value : 0

Barasat 1464 - West Bengal

Tender for supply and delivery of graphite impregnated gland packing of different size and 150 mm dia hose clamp under barasat a.m division

Central Government/Public Sector

TRN :35214002 | 12 Sep, 2025

Tender Value : 0

Raigad - Maharashtra

Tender for gem bids for sodium hypochlorite solution v2 as per is 11673 part 1q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellerexperience criteria, bidder turnover, certificate requestedin atc, additional doc 1 requested in atc, additional doc2 requested in atc, additional doc 3 requested inatc, additional doc 4 requested in atcin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?no -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension3 d /bid number: gem/2025/b/6600304; /dated: 23-08-2025 & & / bid document1 / 12 ; 9; 9 d d, , m m -- / / number of days for which bidwould be auto--extended7 o %o % ;5 ;5 ; ; /bid to ra enabledyeso %o % p p /ra quali cation ruleh1-highest priced bid elimination 4 4 /type of bidtwo packet bid q q & s & s /time allowed for technicalclarifications during technical evaluation3 days t t b b u u t t 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno q q u u /evaluation methodtotal value wise evaluation x & x & /arbitration clauseno /mediation clauseno //bid details /emd detail > /advisory bankicici /emd amount300000 /epbg detail > /advisory bankstate bank of india 4 %/epbg percentage%5.00 b /duration of epbgrequired months.14a. . % & 4& % & % 4 > \ o 9 /emd exemption: the bidder seeking emd exemption, must submit the valid supporting documentfor the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods andservice providers for services are eligible for exemption from emd. traders are excluded from the purview of thispolicy.b. , , t < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. /beneficiary : chief manager financethal, department of fertilizers, rashtriya chemicals and fertilizers limited rcf, ministry of chemicals and2 / 12 fertilizerscm finance /splitting ; / bid splitting not applied. /mii purchase preference /mii purchase preferenceyes /mse purchase preference /mse purchase preferenceyes1. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 2. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 3. reverse auction would be conducted amongst all the technically qualified bidders except the highest quotingbidder. the technically qualified highest quoting bidder will not be allowed to participate in ra. however, h-1will also be allowed to participate in ra in following cases:i. if number of technically qualified bidders are only 2 or 3.3 / 12 ii. if buyer has chosen to split the bid amongst n sellers, and h1 bid is coming within n.iii. in case primary product of only one oem is left in contention for participation in ra on elimination of h-1.iv. if l-1 is non-mse and h-1 is eligible mse and h-1 price is coming within price band of 15% of non-mse l-1v. if l-1 is non-mii and h-1 is eligible mii and h-1 price is coming within price band of 20% of non-mii l-1sodium hypochlorite solution v2 as per is 11673 part 1 300000 liter 5 5 1 2 & & % % % % < < % % 4 `4 ` b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively s s /technical specifications s / as per gem category speci cation /speci cation s s /specificationname b b q q /bid requirementallowed valuesstandards &certificationgoverning standardgenerally confirming to is 11673-part 1 latestrequirementchemical/physicaltype of gradesgrade 2 for industrial userelative density at 25 deg / 25deg c, min1.20available chlorine as cl2, percent, mass by volume12.5 to 15.0total chlorine as cl2, percent, mass by volume12.5 to 15.0free alkali as naoh, g/l, min5.0free sodium carbonate asna2co3, g/l, max0.5packaging &markingnet content of eachcontainer/ pack50 litertest reportstype of lab which carried outtest of complete product toprove the conformity of productas per specificationfrom central govt. lab, nabl accredited lab, manufacturer in-house testadditional specification parameters - sodium hypochlorite solution v2 as per is 11673 part 1 300000 liter specification parameternamebid requirement allowed valuessodium hypochloritethe chemical specification is as follows: sodium hypochlorite naocl as peris 11673 latest grade 2 1. relative density at 25 c/25 c: 1.20 min 2.available chlorine as cl, % by mass/volume: 12.5 to 15.0 3. total chlorine, % by volume as cl: 12.5 to 15.0 4. free alkali as naoh, g/l, min: 5.0 totalquantity 3, 00, 000 litre +/- 25 %* bidders offering must also comply with the additional specification parameters mentioned above. 4 / 12 //o ; b o ; b /consignees/reporting officer and quantity5. .5. ./s.no. //o ; b o ; b /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1sushil kumar402208, stores, rcf ltd thal, alibag, district raigad300000365special terms and conditions-version:1 effective from 22-01-2025 for category sodium hypochloritesolution v2 as per is 11673 part 11. the product may also carry an isi mark/standard mark as per the bis standard governing this category. assuch buyers may also opt for isi marked product while creating bid. in such cases buyer shall verify validbis license for the same at the time of evaluation of bid and check isi marking at the time of receipt ofmaterial before issuing crac. 5 5 : : e e/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. buyer added bid specific atcbuyer added text based atc clausestender au-85726 for supply of sodium hypochlorite 300, 000 liter earnest money deposit emd for rs. 3, 00, 000 /- is to be deposited as per following instructions: online deposit: emd to be deposited online in rashtriya chemicals and fertilizers ltd rcf s accountthrough payment gateway available on our website at: www.rcfltd.com under portals emd payment click here for emd payment. submit the acknowledgement/receipt of online emd payment along with your offer.if exempted from submission of emd, then upload a valid exemption details.please note emd and integrity pact shall not be accepted after bid submission due date and non-submission of the same along with bid shall lead to rejection of your o er. no communication shall be done for the same.pre-qualification criteria:a. experience criteria: a. for manufacturer only: bidder shall submit self- attested po copies and / or invoice copies as evidence of manufacture and supply of 150 kl of sodium hypo chlorite solution is as per is 11673 latest grade 2, manufactured and supplied during an5 / 12 y one of the last 3 years. b. for non-manufacturers: po copy of sodium hypo chlorite solution as per is 11673 latest grade 2 supplied during last seven years from the date of tender satisfying minimum one criteria as follows: i. single po copy of minimum quantity 240 kl.ii. two po copies of minimum quantity 150 kl each.iii. three po copies of minimum quantity 120 kl each.. c. relaxation in experience criteria for eligible mses/ startups1. for mses- relaxation of 25% in prior experience shall be provided to the qualifying mses.2. for start-ups no prequali cation criteria except for criteria de ned by government of india for de nition as start up like certi cate from dipp, maximum years from incorporation and turnover criteria. vendor shall be start up for item under procurement and maximum 10% additional qty. to be awarded to them. for detail kindly refer annexure-v of buyer added atc.b. financial criteria: i. ca certified turnover during last three financial years 2021-22, 2022-23, 2023-24 or 2022-23, 2023-24, 2024-25 required minimum avg. turnoverof rs. 82.12 lakh. the turnover should be issued by practicing ca with membership number, seal and signed with udinin case the date of constitution / incorporation of the bidder is less than 3 years old, the average turnover in respect of the completed financial years after the dateof constitution shall be taken into account. in this case, the financial turnover during last nancial year / the average nancial turnover during preceding two nancial years should be at least rs. 82.12 lakh. ii. relaxation in experience criteria for eligible mses/ startups1. for mses- relaxation of 25% in annual nancial turnover shall be provided to the qualifying mses.2. for startups no prequali cation criteria except for criteria de ned by government of india for de nition as start up like certi cate from dipp, maximum years from incorporation and turnover criteria. vendor shall be start up for item under procurement and maximum 10% additional qty. to be awarded to them.for detail kindly refer annexure-v of buyer added atc. iii. the net worth of the bidder rm manufacturer or principal of authorizedrepresentative should not be negative on the relevant date . it means the net worth of the bidder should not be negative in the balance sheet of last nancial year.andnet worth of bidder should have not eroded by more than 30% thirty percent in the lastthree years, ending on the relevant date . it means the net worth of last nancial year should not be less than 70% compared to the 3rd last financial year.in case the date of constitution/ incorporation of the bidder is less than 3 years old, the following will be applicable: the net worth in each of these years should not be negative. net worth in respect of the immediate previous financial year should not have eroded more 30 per cent than that of its previously audited nancial statement. in case the bidder has completed financial statements of only preceding year, the clause of net worth erosion will not be applicable the relevant date means 31-03-2024 for block of fy 2021-22, 2022-23& 2023-24 and 31-03-2025 for block of fy 2022-23, 2023-24, 2024-25.the nancial soundness should be ca certi ed or audited nancial statement certified by cac. make in india clause: as per revision dt 19.07.2024 of public procurement policy 2017, non-local suppliers cannot participate in tenders having estimates less than r6 / 12 s. 200 crores. offers of class-i and class-ii local suppliers as per make in india policy can only be considered for evaluation and award of contract.d. integrity pact duly signed with date and stamped on each page. upload in relevant packet of this tender.signing the integrity pact is a prerequisite for prequalification. integrity pact and nit conditions will form part of the contract. security deposit:the supplier receiving the loa is required to furnish the required performance security, in the prescribed form by the speci ed date; failing this necessary action including forfeiture of emd will be taken against the supplier. supplier shall submit the security deposit for 05% of the order value basic contract value without taxes within 15 days of the p.o. date in the form of dd or bank guarantee as per r.c.f. format from r.c.f. approved banker valid for a period of delivery period plus 60 days for claim period. or performance security may be furnished in the form of insurance surety bond, account payee demand draft, fixed deposit receipt from a commercial bank, bank guarantee issued/con rmed from any of the commercial bank in india, or online payment in an acceptable form. if the supplier / contractor fails to submit the performance security as indicated above, performance security will be deducted from running billsthe performance security will be forfeited and credited to the procuring entity s account in the event of a breach of contract by the contractor. it shall be refunded to the contractor without interest, after he duly performs and completes the contract in all respects but not later than 90ninety days of completion of all such obligations including the warranty under the contract.bank guarantee to be addressed and submitted to: chief manager finance, rcf thal unit, alibag, raigad 402208.technical conditions:1the chemical specification is as follows: sodium hypochlorite naoclas per is 11673 latest grade 21. relative density at 25 c/25 c: 1.20 min2. available chlorine as cl, % by mass/volume: 12.5 to 15.03. total chlorine, % by volume as cl: 12.5 to 15.04. free alkali as naoh, g/l, min: 5.0total quantity 3, 00, 000 litre +/- 25 % terms and conditions- 1. certi cate of analysis from nabl accredited lab/manufacture in-house/oem and msds shall be suppliedalong with supply.2. material received at rcf thal shall be inspected by rcf thal. rcf representative will draw sample and analysis will be carried out at rcf s laboratory. the results obtained at rcf s laboratory will be nal and binding. the consignment shall be rejected if it does not meet the po specification. delivery period:1. delivery period of naocl shall be within one year from gem po placement.2. delivery shall be in staggered manner as per rcf requirement. at single time minimum 15 kl to 20 kl sodium hypochlorite will be required.3. material delivery shall be done within ten days after rcf concern official information.7 / 12 . drum shall be delivered on wooden pallet.5. successful bidder shall take back the empty hypo drums within one month after use.6. material shall be supplied in drum having sodium hypochlorite solution in net volume of 50 litre drum.7. delivery at rcf thal site only.8. the shelf life of the sodium hypochlorite solution shall be a minimum of one 1 year from the date of delivery of the material. payment terms: payment shall be made on the 30th day from the date of receipt of material at rcf thal site, subject to acceptance of the material as per the acceptance/rejection criteria and submission of all required documents. acceptance / rejection criteria for sodium hypochlorite: 1. acceptance standard range 12.5% to 15%: if the active chlorine content of the supplied material is between 12.5% and 15%, the material shall be accepted. payment will be made considering 12.5% active chlorine content as the base i.e.100 percent payment. any excess concentration above 12.5% shall not be considered for additional payment.2. acceptance higher than 15%: if the active chlorine content exceeds 15%, the material shall still be accepted. however, payment will be restricted to 12.5% of active chlorine content only. example: if one bidder supplies sodium hypochlorite with 12.5% and another with >15% chlorine, both will be paid at the 12.5% base rate.3. acceptance with pro-rata payment 9.5% to <12.5%: if the active chlorine content lies between 9.5% and less than 12.5%, the material will be accepted, but payment shall be made on a pro-rata basis. payment formula:payable amount actual chlorine content % / 12.5% rate as per gem po per litreexample: if the actual chlorine content is 11%, then:payment 11 % / 12.5 % rate as per gem po per litre4. rejection below 9.5% : if the active chlorine content is below 9.5%, the entire lot shall be rejected and not accepted for delivery. integrity pact:rcf has accepted and agreed to the terms and conditions of the integrity pact.the bidder, as a token of acceptance of the terms and conditions of the integrity pact will sign and stamp the integrity pact and submit the same with nit documents.signing the integrity pact is a prerequisite for prequalification and integrity pact and nit conditions will form part of the contract. documents to be submitted along with offer:1. emd payment details8 / 12 . integrity pact duly signed with date and stamped on each page3. po copies as per above mentioned criteria4. ca certified turnover proofs of last three financial years mentioning udin5. net worth details as mentioned above6. make in india declaration as per make in india policy mentioning % of local content and place of value addition7. no deviation certificate as per format given in bid document please note emd and integrity pact shall not be accepted after bid submission due date and non-submission of the same along with bid shall lead to rejection of your offer. no communication shall be done for the same. additional information:1. the rates quoted shall be inclusive of all taxes, duties, freight, insurance and any other statutory charges.2. pre-bid meeting shall be conducted on 10th day of tender publishing at rcf thal, alibag, raigad maharashtra-402208. queries regarding pre-bid meeting shall be sent to rcf on following mail before 7 days of pre-bid meeting.3. any communication shall be done to mail id gshaha@rcfltd.com/ hemant.rao@rcfltd.com note: please note that any blank field un-marked in the preceding confirmation box will be treated as agreed only. no.descriptionbidder confirmationplease put in front of your confirmation1pl. ensure following documents are submitted along with bid document 1.1emd as per bid document submitted1.2po copy as per pqc submitted1.3turnover certificate as per pqc submitted1.4net worth certificate of last 3 years submitted1.5integrity pact duly filled, signed and stamped along with date on each page which is attached in buyer added atc.also signed and stamp copy of buyer added atc. submitted9 / 12 .6make in india declaration as per make in india policy mentioning % of local content and place of value addition submitted2pl. make sure that quoted rates are inclusive of all taxes i.e. gst, freight, packing and forwarding and insurance, statutory charges etc i.e. delivered price to rcf thal stores confirmed3please note that rcf will not accept any deviation in payment termpayment terms: payment terms: payment shall be made on the 10th day from the date of crac as per std. term & cond., subject to acceptance of the material as per the acceptance/rejection criteria and submission of all required documents. noted4mutually agreed damages clause for late delivery @ 0.5% per week or part thereof subject to maximum of 10% of total p.o./contract value. noted5firm price: price shall remain firm through out

Central Government/Public Sector

TRN :35214448 | 06 Sep, 2025

Tender Value : 0

Ernakulam - Kerala

Tender for gem bids for mechanical, carbon insert, seal ring tc, complete mechanicalseal assembly p2006, shaft sleeve, o ring vitiongland gasket, gasket vition pt. no. g, carboninsert no.5, mechanical seal ring tc drive end, seal ring tc non drive end, complete mechanicalseal assembly nde p2005, complete mechanical sealassembly de p2005, nde shaft sleeve, de shaftsleeve, duraflex shaft packing de, duraflex shaftpacking nde, viton o ring sleeve packing nde, insert mounting duraflon de, insert mountingduraflon nde, carbon insert no.5 nde, o ringviton gland gasket, duraflon shaft packing, vitonsleeve packing duraflon, duraflon insert ptfe, complete mechanical seal assembly 102p001 and102p003, mechanical seal ring tc, viton insertmounting, viton shaft packing, carbon insert no 5, sleeve packing viton, gland cover o ring, sleevegasket viton o ring

State Government

TRN :35217813 | 09 Sep, 2025

Tender Value : 0

Kapurthala - Punjab

Tender for gem bids for college, steel almirah, steel almirah small, fully plasticmoulded chair with arms seat andback cushioned, executive table or office table, library almirahsteel glass front cabinet, laboratoryorlibraryorcanteen table, drawing stool, computertable, computer and printer table, steel rack, conference room table, chemistry lab table, footrest, laboratory table with boxes, lecture stand, laboratory table with drawers, notice board, single seat sofa, three seat sofa, revolving chairbig, revolving chair smallsteel almirah : size:- height-1981mm, width-916 mm, depth - 486mm construction: - the almirah should havewelded type construction. the thickness of back panelshould be 0.8 mm, other components the thickness shouldbe 0.9mm and the shelf thickness should be 1.2 mm doors& handles: - the almirah should have full height steelhinged door & should be provided with handle. locking: -the almirah should be provided with 3 way lockingmechanism & shooting bolt arrangement. shelves & loadbearing capacity: - the almirah should have height wiseadjustable shelf mounting and uniformly distributed loadcapacity per each full shelf should be 80 kg and shelvesshould be 4 in number and should be fully adjustable.powder coating process: - all the metal parts shall be givenantirust surface treatment & and shall be powder coatedwith epoxy polyester powder. it shall involves an 8 steptreatment. final finish shall consists of poxy polyesterpowder coating of approved color & shade with a dry filmthickness of minimum 40 microns. the testing of paint shallbe done for various physical & chemical properties as peris: 101. the material shall then be oven baked with a /bid number: gem/2025/b/6561795* /dated: 25-08-2025 & & / bid document1 / 35 controlled temperature of 1800c to 2000c. manufacturer/supplier must have iso- 9001, 14001, bifma & ohsascertifications. certificates should be attached. leveler:-itshould have leveler with m10 screw type leveler withhexagonal plastic base. , steel almirah small : size:-height 1270 mm, width 765mm, depth 440 mmconstruction: - the almirah should have welded typeconstruction. the thickness of back panel should be 0.8mm, other components the thickness should be 0.9mm andthe shelf thickness should be 1.2 mm doors & handles: -the almirah should be provided with full height steelhinged door & should have handle. locking: the almirahshould have 3 way locking mechanism with shooting boltarrangement. shelves & load bearing capacity: - thealmirah should have height wise adjustable shelf mountingand uniformly distributed load capacity per each full shelfshould be 80 kg maximum and shelves should be 3 innumber and should be fully adjustable shelves. powdercoating process: - all the metal parts shall be given antirustsurface treatment & and shall be powder coated with epoxypolyester powder. it shall involves an 8 step treatment. finalfinish shall consists of poxy polyester powder coating ofapproved color & shade with a dry film thickness ofminimum 40 microns. the testing of paint shall be done forvarious physical & chemical properties as per is: 101. thematerial shall then be oven baked with a controlledtemperature of 1800c to 2000c. manufacturer / suppliermust have iso- 9001, 14001, bifma & ohsas certifications.certificates should be attached leveler:- it should haveleveler with m10 screw type leveler with hex plastic base , fully plastic moulded chair with arms seat &backcushioned : size - total height : 820mm + 10mm, totalwidth : 565mm + 10mm, total depth : 565mm + 10mm&total weight: 4.20 kg + 50gms cushioned chair with armscomprising of single piece moulded frame made ofpolypropylene & coated with pu coating paint high glossfinish with seat & back cushion made of moulded pu foamand velvet upholstery. weight of moulded polypropleneframe is 4.2 kg. , executive table/office table : thesize of the table in mm should be 1500 x 600 x 728 andshould consist of following parts: top: top should furtherconsist of work surface which should be 18mm thick and prelaminated particle board plb. all work surface edgesshould be duly sealed with 2mm thick machine fitted pvcedge banding understructure: understructure shouldconsist of the following components: a.rectangular frame:rectangular frame should be a fabricated component in1.2mm thick crca is:513 with powder coat epoxypolyester b.legs: legs should be fabricated component in38mmx25mmx1.2mm thick ms erw tube is:7138 withpowder coat epoxy polyester c. plastic cap for cable:plastic cap for cable should be made up of injectionmoulded polypropylene. d. leveler glide for leg : levelershould be made of nylon 6 & consist of ms bolt. storage:storage should consist of pedestal. the pedestal shouldfurther consist of a. shell which should be 0.6mm thickcrca is:513 and should have powder coat epoxypolyester as finish. b. drawer tray which should be 0.6mmthick crca is:513and should have powder coat epoxypolyester as finish c. drawer front which should be 0.8mmthick crca is:513 and should have powder coat epoxypolyester as finish d. frame assembly which should be1.2mm thick rca is:513 and should have powder coatepoxy polyester as finish. e lock which should be 10 //bid details2 / 35 lever cam lock f. handle which should be made ofinjection moulded polypropylene g. leveler which should bemade up of nylon 6 and should also consist of ms boltpowder coating process: all the metal parts shall be givenantirust surface treatment and shall be powder coated withepoxy polyester powder. it shall involves an 8 steptreatment. final finish shall consists of poxy polyesterpowder coating of approved color & shade with a dry filmthickness of minimum 40 microns. the testing of paint shallbe done for various physical & chemical properties as peris: 101. the material shall then be oven baked with acontrolled temperature of 1800c to 2000c. manufacturer /supplier must have iso- 9001, 14001, bifma & ohsascertifications. , library almirah steel glass frontcabinet : the size of the almirah should be of 915 mm wx 486mm d x 1981 mm h construction & material: - itshould have welded construction using 0.8 mm thick crcavirgin steel for shelf & 0.9 mm thick crca for all othercomponents. door glasses thickness 5mm should be fittedto full height steel frame. minimum 6 lever locking 2 waylocking mechanism with shooting bolt should be provided.standard size handle to be provided should be chromeplated brass handle shelving: height wise adjustableshelves 4 nos should be provided. uniformly distributedload capacity per full shelf should be 80 kg maximumleveler should be provided which consist of m10 screw typewith hexagonal plastic base. add 10mm to unit height andadditional 10mm for adjustment. powder coating process:all the metal parts shall be given antirust surface treatment& and shall be powder coated with epoxy polyester powder.it shall involves an 8 step treatment. final finish shallconsists of poxy polyester powder coating of approved color& shade with a dry film thickness of minimum 40 microns.the testing of paint shall be done for various physical &chemical properties as per is: 101. the material shall thenbe oven baked with a controlled temperature of 1800c to2000c. manufacturer quality & safety assurancecertificationmanufacturer / supplier must have iso- 9001, 14001, bifma & ohsas certifications. , laboratory/library/canteen table : overall size: 1800 mm w x900mm d x 740mmh +- 10mm tolerance on overallsizes. frame:legs of table frame should be made of erwround pipe of 48mm+- 1.0mm and 1.5mm thickminsupports shall not be more than 160mm from the floor levelwhen measured frombottom of pipe two supports of thesame pipe should be provided breadth wise in betweenthelegs of the frame and two supports should also beprovided length wise between legs supports are welded toeach other properly. the frame top should be made of msangle iron size38mmx38mmx5mmmin.. the bottom of legsshould be closed with metal shoes. top:top should be madeout of 18mm +-1.0mm commercial board fixed with goodquality sunmica 0.75mm thick. shade of sunmica top shouldbe natural teak/ baverian beach. all the edges of thesunmica top should be fixed with teak beading duly spiritpolished. finish all steel components are to be prepared fordegreasing and derusting. after pretreatment, the steel steelcomponents are to be epoxy powdercoated. thickness ofpowder coatingshould be 50-60 micron min. shade ofpowder coating should be nickle grey/ seimn grey. , drawing stool : seat assembly: it is circular type 30.0 0.5cm and made up of 0.1 0.012 cm thickness crsteel. it is welded to the understructure and coated withblack epoxy polyester powder dft 50-80 microns.

Central Government/Public Sector

TRN :35219051 | 10 Sep, 2025

Tender Value : 4.25 Lacs

Bhagalpur - Bihar

Tender for gem bids for gland, gland packing-100259350 item 10 m0541903255, item 20 m0542700653, item 30 m0541902331, item 40 m0541906856, item 50 m0545210384, item 60 m0542804050, item 70 m0545101950, item 80 m0545101848, item 90 m0541701431, item 100 m0545101838, item 110 m0541907895

Central Government/Public Sector

TRN :35211867 | 12 Sep, 2025

Tender Value : 0

Kamrup - Assam

Tender for gem bids for dglp, monofilament polyglecaprone size 3minus 0coma 1slash 2circle 25mm cutting needlecoma 70minus 90cm edot gmonocrylslash biosyn box of 12 vicryl nominus 02cutting 90cmcoma sizeminus 45 mm 1slash 2 circle absorbable braided polyglyctin suture no 1 rb 90cm size45mm 1slash 2 absorbable braided polyglyctin suture no 1cutting 90cm size 45mm 1slash 2 absorbable braidedpolyglyctin suture no 1minus 0 rb 90cm size 45mm 1slash2 absorbable braided polyglyctin suture no 1minus 0cutting 90cm size45mm 1slash 2 absorbable braidedpolyglyctin suture no 2minus 0 rb 90cm size 45mm 1slash2 suture rapid vicryl 1dot 0 round body braidedpolyglactin rapid absorption 2slash 0coma 180 cmscoma1slash 2 circle cutting coma 30minus 40 mm double armedlike vicryl rapideslash velosorb box of 12 slik braidedsize 1coma 70minus 76cm reverse cutting 3slash 8 circleneedle 45 mm silk size 1slash 0coma 70minus 80cmcoma3slash 8 circle reverse cutting needlecoma 40minus 50mmlike mersilkslash sofsilk box of 12 synthetic nonabsorbable sutures polypropylenecoma size 1coma 70cmcoma 1slash 2circle round body 40mm heavydot no1slash 0 polypropylene monofilament synthetic suturelength 70minus 100cmcoma 1slash 2 circle cutting needle30minus 35mmcoma box of 12 polypropelene bluemonofilament sizeminus 1slash 0 rb polypropylene bluemonofilament 70minus 75cm size 2slash 0 cutting needle20minus 25mm 1slash 2 polypropylene monofilament n02minus 0 70minus 90cmcoma round bodied needle 20mmlike proleneslash surgipro box of 12 polypropylene bluemonofilament 70minus 75cm size 3slash 0 cutting needle20minus 25mm 1slash 2 polypropylene monofilamentcoma size 4slash 0coma 70minus 90 cm 15minus 25mmcutting needle like proleneslash surgipro box of 12 bid number gem2025b6570524 dated 22-08-2025 bid document1 79 0 0 polypropylene monofilament coma size 5slash 0coma70minus 90 cm 15minus 25mm cutting needle likeproleneslash surgipro box of 12, monofilamentpolypropylene blue suture 6slash 0 coma1slash 2 circle 12minus 15 mm round body needle comal 45 cm, polypropylene monofilament coma size 6slash 0coma40minus 50 cm 10minus 15mm cutting needle likeproleneslash surgipro box of 12, polypropylene bluemonofilament suture 7slash 0 coma 1slash 2 circle 12 mmround body needle comal45 cm, polyamide monofilamentsize 1coma 100cmcoma 1slash 2 circle reverse cutting30minus 50mm egdot ethylonslash dermalonslashmonosof box of 12, polyamide monofilament size 1slash0coma 70minus 80 cm 3slash 8 circle reserve cutting40minus 45 mm, monofilament polyamide size 3slash 070cm reverse cutting 26mm 3slash 8 c, polyamidemonofilament size 2slash 0coma 70minus 80 cm 3slash 8circle reserve cutting 40minus 45 mm box of 12, no 1 pds90 cm length with cutting needle strong and closer of lapports full quality assurance box of 12, no 2minus 0monofilament polydioxanone pds suture violet 70minus80cmcoma 1slash 2 circle 30minus 40mm round bodiedneedle box of 12, thunderbeat 5mm 35cms front actuatedmodel nodot tbminus 0535fcs, thunderbeat 9mm 20cmsopen extended jaw model nodot tbminus 0920oe, thunderbeat beat transducer model nodot tdminus tb400, 30 gm per sq mtrs medical grade pe medical staffapronsdot widthminus 78dot 74cmcoma lengthminus 120cm, sterile polyethylene ultrasound probe cover for linearultrasound probes, chlorhexidine gluconate solution bp 25percent vslash v equivalent to chlorhexidine gluconate 5percent wslash v can of 1ltr, bowie dick test pack class ii, elastomeric disposable infusion pumpcoma multirate2coma3and 5mlslash hour with 300ml fill volume and 5micron filterdot non electronic medication pump forambulatory infusion therapy, sodium percarbonateperoxyhydrate disinfectant 1l, nano antimicrobialnonminus sterile powder free nitrile gloves sizeminusmedium, nano antimicrobial nonminus sterile powder freenitrile gloves sizeminus large, sterile disposablemonopolar electrominus cautery pencilslash pen with leadnonminus stick silicon coated nonminus charring tip andcolour coded switches, regional anesthesia cathetersecurement device to fit catheter used with 18g needles, no 1 monofilament polypropylene blue 45 mm 1slash 2circle heavy cutting body 100cm, no 2 monofilamentpolypropylene blue 45 mm 1slash 2 circle heavy cuttingbody 100cm, endotracheal tube with ultra thin cuff 3dot 0mm, endotracheal tube with ultra thin cuff 3dot 5 mm, endotracheal tube with ultra thin cuff 4dot 0 mm, endotracheal tube with ultra thin cuff 4dot 5 mm, endotracheal tube with ultra thin cuff 5dot 0 mm, endotracheal tube with ultra thin cuff 5dot 5 mm, endotracheal tube with ultra thin cuff 6dot 0 mm, endotracheal tube with ultra thin cuff 6dot 5 mm, endotracheal tube with ultra thin cuff 7dot 0 mm, endotracheal tube with ultra thin cuff 7dot 5 mm, endotracheal tube with ultra thin cuff 8dot 0 mm, endotracheal tube with ultra thin cuff 8dot 5 mm, reinforced endotracheal tube with ultra thin cuff 3dot 0 mm, reinforced endotracheal tube with ultra thin cuff 3dot 5mm, reinforced endotracheal tube with ultra thin cuff 4dot0 mm, reinforced endotracheal tube with ultra thin cuff4dot 5 mm, epidural catheterization full set 18 g with //bid details2 / 79 catheter fixation device and click lock connector, whitacrepencil point spinal needle with introducer size 25 g, whitacre pencil point spinal needle with introducer size 26 g, microlaryngeal oralslash nasal endotracheal tube cuffedmurphy eye size 3dot 0, microlaryngeal oralslash nasalendotracheal tube cuffed murphy eye size 3dot 5, microlaryngeal oralslash nasal endotracheal tube cuffedmurphy eye size 4dot 0, microlaryngeal oralslash nasalendotracheal tube cuffed murphy eye size 4dot 5, microlaryngeal oralslash nasal endotracheal tube cuffedmurphy eye size 5dot 0, microlaryngeal oralslash nasalendotracheal tube cuffed murphy eye size 5dot 5, microlaryngeal oralslash nasal endotracheal tube cuffedmurphy eye size 6dot 0, microlaryngeal oralslash nasalendotracheal tube cuffed murphy eye size 6dot 5, microlaryngeal oralslash nasal endotracheal tube cuffedmurphy eye size 7dot 0, microlaryngeal oralslash nasalendotracheal tube cuffed murphy eye size 7dot 5, microlaryngeal oralslash nasal endotracheal tube cuffedmurphy eye size 8dot 0, microlaryngeal oralslash nasalendotracheal tube cuffed murphy eye size 8dot 5, surgicalblade sterile size 10 single peel pack in metal foil, surgicalblade sterile size 11 single peel pack in metal foil, surgicalblade sterile size 15 single peel pack in metal foil, surgicalblade sterile size 23 single peel pack in metal foil, surgicalblade sterile size 20 single peel pack in metal foil, surgicalblade sterile size 22 single peel pack in metal foil, scenteddisposable anaesthesia face mask size 1, scenteddisposable anaesthesia face mask size 2, scenteddisposable anaesthesia face mask size 3, scenteddisposable anaesthesia face mask size 4, scenteddisposable anaesthesia face mask size 5, scenteddisposable anaesthesia face mask size 6, disinfecting andsterilising solution for surgical instrument 2 percentglutaraldehyde solution with activator, endoscopic ligatingclip applicator compatible with v shaped titanium clips sizelarge lt 300 grey, endoscopic ligating clip applicatorcompatible with v shaped titanium clips size extra large lt400 yellow, endoscopic ligating clip applicator with 90degree angle jaw compitable with v shaped titanium clipssize large lt 300 grey, endoscopic ligating clip applicatorwith 90 degree angle jaw compitable with v shaped titaniumclips size extra large lt 400 yellow, sterile corrugateddrainage sheet with radio opaque line 25 mm x 250 mm, titanium hemostatic ligation clips size large lt 300 greycartridge of 6 clips, titanium hemostatic ligation clips sizeextra large lt 400 yellow cartridge of 6 clips, seal bonnetwashers compatible with karl storz laparoscopic trocar5mm, seal bonnet washers compatible with karl storzlaparoscopic trocar 10 mm, disposable suction irrigationtube 5mm with central and lateral openings with two waystop cockcoma working length 410mm compatible withrichard wolfe laparoscopy set, spinal needle 15cmcoma22fgcoma type chibacoma for lumabar sympathetic blockfor crps of lower limbsdot, polypropylene mesh meshprosthesis hernia minus medium polypropylene mesh size15cm x 15cm composite light weight mesh of polypropyleneand polygalactin 910, endotracheal tube introducer bougieadult, endotracheal tube introducer bougie paeds, foambased hand rubcoma bott of 500ml, ot drape sheet large193cm x 139cm, ot drape sheet medium 101cm x 147cm, disposable sterile surgical impervious gown reinforced withaami 4 en 13795 slash 5 layered microporous filmimpregnated reglan sleevecoma v shaped collarcoma with2 scrimmed towel, laminospinal drape 160cm x 385cm

Search Other Industries

List of non-classified Tenders

Tender for supply of modified packing gland part finished for piston rod.

Tender for gem bids for packing gland graphited 14 mm

Tender for supply and delivery of graphite impregnated gland packing of different size and 150 mm dia hose clamp under barasat a.m division

Tender for gem bids for gland, gland packing-100259350 item 10 m0541903255, item 20 m0542700653, item 30 m0541902331, item 40 m0541906856, item 50 m0545210384, item 60 m0542804050, item 70 m0545101950, item 80 m0545101848, item 90 m0541701431, item 100 m0545101838, item 110 m0541907895

Get Non Classified Tender Alert...

Search Other Industries

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us