Liasoning Service

764523

Liasoning Service

Warm Greetings from www.thetenders.com, the fastest growing tender information portal in India.

Tender For Road Safety And Signage Work On Roads Under Ae-Ii In Fy-2025-26 - SPEED LIMITProviding and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing 2 Road DelinatorDelineator: Supply & fixing of MS Delineator made of Mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 microns for protection against corrosion. The surface should be conceated so that there should not be any exposed surface without powder coating. 3 TRAFFIC SIGNS -HAZARD MARKER (LEFT/RIGHT) Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing 4 Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing(DOUBLE CHEVRON (NORMAL)) As Per MoRTH-801 (8.4 (iii) 5 Direction and Place indentification signs with more than 0.90 sqm sizeWARNING BOARDProviding and erecting direction and place identification retro-reflectorised sign as per IRC-67 made of high intensity grade sheeting The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/ Government Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends, letters, numerals and borders etc should be as per MoRTH specification No-801.3.7. Sheet fixed over aluminium sheeting, 2mm thick with area exceeding 0.9 sqm. Supported on a mild steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45x45x60 cm., below ground level as per approved drawing, complete. (Morth-801 (8.6) 6 Retro Reflective Sheeting type XI with 4 mm thick ACM Double Side MORTH-801 (Sl. No. 12) 7 Providing and laying of hot applied thermoplastic compound 5.00 mm thick including reflectorising glass beads @ 500 gms per sqm area, thickness of 5.00 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. (Repeated bars) MORTH-803(8.130)-Base 8 Solar Power road marker (Solar Studs)The solar studs shall be made of Aluminium alloy and poly carbonate material which shall be absolutely weather resistant and strong enough to support a load of 13,635 kg tested in accordance with ASTM D4280. Its colour may be white, red, yellow, green or blue or combination as directed by the Engineer. Its water resistance shall meet the requirements of IP 65 in accordance with IS:12063:1987 category 2 for protection against water ingress. The dimensions of solar studs shall not be less than 100 mm X 100 mm X 10 mm. It shall have super bright LEDs so as to provide long visibility from a distance of more than 800 m. Its flashing rate shall not be less than 1 Hz. Its should be able to give the prescribed performance in the temperrature range of 40°C to +55°C. Its life shall be not less than 3 Years. The rate shall include all materials, labour, equipments, fabrication, transportation, erection, installation and incidentals all complete as per direction of the Engineer-in-Charge.

TRN :49058034
Government Departments / Housing Urban And Rular Development
Lalitpur - Uttar Pradesh

INDIAN Instructions for obtaining this information:
  1. If you are a registered member, please login in the members area with your user id and password.
  2. If you are not a registered member, then first register for the services.
  3. If you don’t want to register, but want to download only this project information, then fill in the form.
  4. Email id and mobile should be correct. www.thetenders.com will not be responsible for non receipt of the desired information at your end owing to wrong email id and mobile number.
  5. Upon filling this form follow the next instructions.
  6. You will receive the information and documents on the email id provided by you.
  7. In case of any query please call us on +91 92760 83333
INDIAN - Liason

Why www.thetenders.com ?

  • Fastest growing tender information portal in India
  • User friendly tender web portal with multiple search criteria
  • Reliable and quick tender information services
  • Reduces time, cost and man power required for tender cycle
  • Tenders information across India and Globe
  • Tenders categoried in various groups
  • Team, sprawling over entire Geography, scans various tenders and uploads them on our portal
  • Comprehensive and Sophisticated software to search online tenders
  • Search features by Product Keywords, Industries, States & Regions, Price, Organisation & Sectors etc.
  • Choose categories as per your choice
  • Daily alerts on emails about tenders of your category
  • Non English Tenders translated into English
  • 24 x 6 customer support with E-tendering support
  • Scanned copies of tender documents
  • Tenders from Government, Semi Government, Corporate Sector, Private Sector, PSUs, NGOs, state, city and local bodies
  • Download available tender documents.
  • Technical support for online and offline tenders including e-bidding, e-auction etc.
  • No hidden Cost / No Additional Charges / Quick service activation
  • Bid Form collection support
  • Bid Form filling support
  • Bid Form submission support
  • Provide SEO benefit for you site*
  • Available upcoming projects and Market research journals absolutely free.
  • Free 5 page website designing and hosting *
  • Provides platform to advertise your products daily through emails and reach the customer inbox directly. *
  • Tenders from newspapers
  • Tenders from websites

Set Tender Alert

Activate daily alerts to know the tenders available of your work.

Get alerts

Bidding Support

Ask experts, how to fill bid forms, submit bids, participate in bids.

Get in touch

GeM Registration

Looking for GeM Registration? Get in touch with us and we will do the needful.

Registration

Digital Certificate

Get DSC for e-Tendering, e-Auction, e-bidding, Corporations / Associations / Others Tenders

Purchase now

Tender Awards

Want to know who's got the tender and are looking for subcontracting?

Connect now

Projects

Government and other private players, Real-time Updates of Project Information

Get info

International Tenders

We almost cover all the regions and countries across the world. Click to take your business to new heights.

Start now

Web Design

Get the Best Offers & Deals, expertise in developing static websites, dynamic websites and e-commerce.

Design now

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us

W B


Copyright ©2018 - Thetenders.com. Read Policies