Notice Inviting Tender (NIT) by the State Government Of Punjab for Gem Bids For College, Fully Plastic Moulded Chair With Arms Seatandback Cushioned, Executive Table Or Office Table, Laboratory Or Library Or Canteen Table, Computer Table, Computer And Printer Table, Conference Room Table, Chemistry Lab Table, Footrest, Laboratory Table With Boxes, Laboratorytable With Drawers, Revolving Chair Big, Revolving Chair Smallfully Plastic Moulded Chair With Arms Seat &Backcushioned-Size - Total Height : 820Mm + 10Mm, Totalwidth : 565Mm + 10Mm, Total Depth : 565Mm + 10Mm&Total Weight: 4.20 Kg + 50Gms Cushioned Chair With Armscomprising Of Single Piece Moulded Frame Made Ofpolypropylene & Coated With Pu Coating Paint High Glossfinish With Seat & Back Cushion Made Of Moulded Pu Foamand Velvet Upholstery. Weight Of Moulded Polypropleneframe Is 4.2 Kg., Executive Table/Office Table-Made Upof Injection Moulded Polypropylene. D. Leveler Glide For Leg: Leveler Should Be Made Of Nylon 6 & Consist Of Ms Bolt.Storage: Storage Should Consist Of Pedestal. The Pedestalshould Further Consist Of A. Shell Which Should Be 0.6Mmthick Crca Is:513 And Should Have Powder Coat Epoxypolyester As Finish. B. Drawer Tray Which Should Be 0.6Mmthick Crca Is:513And Should Have Powder Coat Epoxypolyester As Finish C. Drawer Front Which Should Be 0.8Mmthick Crca Is:513 And Should Have Powder Coat Epoxypolyester As Finish D. Frame Assembly Which Should Be1.2Mm Thick Rca Is:513 And Should Have Powder Coatepoxy Polyester As Finish. E Lock Which Should Be 10Lever Cam Lock F. Handle Which Should Be Made Ofinjection Moulded Polypropylene G. Leveler Which Should Bemade Up Of Nylon 6 And Should Also Consist Of Ms Bolt
/Bid Number: Gem/2026/B/7096951* /Dated: 12-01-2026

& & / Bid Document1 / 23 Powder Coating Process: All The Metal Parts Shall Be Givenantirust Surface Treatment And Shall Be Powder Coated Withepoxy Polyester Powder. It Shall Involves An 8 Steptreatment. Final Finish Shall Consists Of Poxy Polyesterpowder Coating Of Approved Color & Shade With A Dry Filmthickness Of Minimum 40 Microns. The Testing Of Paint Shallbe Done For Various Physical & Chemical Properties As Peris: 101. The Material Shall Then Be Oven Baked With Acontrolled Temperature Of 180 C To 200 C. Manufacturer /Supplier Must Have Iso- 9001, 14001, Bifma & Ohsascertifications., Laboratory/ Library/Canteen Table-Overall Size: 1800 Mm W X 900Mm D X 740Mmh +-10Mm Tolerance On Overall Sizes. Frame:Legs Of Tableframe Should Be Made Of Erw Round Pipe Of 48Mm+-1.0Mm And 1.5Mm Thickmin Supports Shall Not Be Morethan 160Mm From The Floor Level When Measuredfrombottom Of Pipe Two Supports Of The Same Pipe Shouldbe Provided Breadth Wise In Between Thelegs Of The Frameand Two Supports Should Also Be Provided Length Wisebetween Legs Supports Are Welded To Each Other Properly.The Frame Top Should Be Made Of Ms Angle Ironsize38mmx38mmx5mmmin.. The Bottom Of Legs Should Beclosed With Metal Shoes. Top:Top Should Be Made Out Of18mm +-1.0Mm Commercial Board Fixed With Good Qualitysunmica 0.75Mm Thick. Shade Of Sunmica Top Should Benatural Teak/ Baverian Beach. All The Edges Of The Sunmicatop Should Be Fixed With Teak Beading Duly Spirit Polished.Finish All Steel Components Are To Be Prepared Fordegreasing And Derusting. After Pretreatment, The Steel Steelcomponents Are To Be Epoxy Powdercoated. Thickness Ofpowder Coatingshould Be 50-60 Micron Min. Shade Ofpowder Coating Should Be Nickle Grey/ Seimn Grey., Computer Table-Computer Table Should Have Dimensionsmm 900 X 750 D X 730 With +- 10Mm Tolerance On Overallsizes. The Computer Table Should Consist Of Followingcomponents. Tops Should Be Made Up Of 25Mm Thick Prelaminated Particle Boards With Machine Fitted Pvc Edgebanding On All Sides. Understructure Should Be Made Of50.8 X 25.4 Mm X 1.25 Mm Thick Powder Coated Erw Tubesat Base Which Should Welded To The Vertical Channels Whichshould Further Be Made Of 0.6Mm Thick Powder Coated Ms C Sections. Footrest And Modesty Panels Should Beprovided For Stability. The Tubes Should Be Closed Withplastic Caps. Each Table To Be Supplied With One Slidingkeyboard Tray With One Cpu Trolley Fitted And Tray With Prelaminated Particle Board. Powder Coating Process: All Themetal Parts Shall Be Given Antirust Surface Treatment & Andshall Be Powder Coated With Epoxy Polyester Powder. Finalfinish Shall Consist Of Epoxy Polyester Powder Coating Ofapproved Color & Shade With A Dry Film Thickness Ofminimum 40 Microns. The Testing Of Paint Shall Be Done Forvarious Physical & Chemical Properties As Per Is: 101. Thematerial Shall Then Be Oven Baked With A Controlledtemperature Of180 C To 200 C. Manufacturer / Suppliermust Have Iso- 9001, 14001, Bifma & Ohsas Certifications.Level Adjustors Should Also Be Provided To Take Care Ofunevenness In Floor, Computer & Printer Table-The Tableshould Have Dimensions Mm 1500 X 750 X 730 With +-10Mm Tolerance On Overall Sizes The Computer Tableshould Consist Of Following Components:- Tops Top Shouldbe Made Up Of 25Mm Thick Pre Laminated Boards Withmachine Fitted Pvc Edge Banding On All Sides.Understructure Should Be Made Of 50.8 X 25.4 Mm X 1.25Mm Thick Powder Coated Erw Tubes At Base Which Should



//Bid Details2 / 23 in Kapurthala - Punjab has been published.
The last date of this tender is 27/01/2026, work value is  0 (Refer Doc) INR, EMD is  0 (Refer Doc) INR and tender document fees is  0 (Refer Doc) INR
For more details call us on +91 92760 83333 for bidding support this tender, GeM, vendor registration (if any) and tender BOQ documents.