Notice Inviting Tender (NIT) by the State Government Of Punjab for Gem Bids For College, Steel Almirah, Steel Almirah Small, Fully Plasticmoulded Chair With Arms Seat Andback Cushioned, Executive Table Or Office Table, Library Almirahsteel Glass Front Cabinet, Laboratoryorlibraryorcanteen Table, Drawing Stool, Computertable, Computer And Printer Table, Steel Rack, Conference Room Table, Chemistry Lab Table, Footrest, Laboratory Table With Boxes, Lecture Stand, Laboratory Table With Drawers, Notice Board, Single Seat Sofa, Three Seat Sofa, Revolving Chairbig, Revolving Chair Smallsteel Almirah : Size:- Height-1981mm, Width-916 Mm, Depth - 486mm Construction: - The Almirah Should Havewelded Type Construction. The Thickness Of Back Panelshould Be 0.8 Mm, Other Components The Thickness Shouldbe 0.9mm And The Shelf Thickness Should Be 1.2 Mm Doors& Handles: - The Almirah Should Have Full Height Steelhinged Door & Should Be Provided With Handle. Locking: -the Almirah Should Be Provided With 3 Way Lockingmechanism & Shooting Bolt Arrangement. Shelves & Loadbearing Capacity: - The Almirah Should Have Height Wiseadjustable Shelf Mounting And Uniformly Distributed Loadcapacity Per Each Full Shelf Should Be 80 Kg And Shelvesshould Be 4 In Number And Should Be Fully Adjustable.powder Coating Process: - All The Metal Parts Shall Be Givenantirust Surface Treatment & And Shall Be Powder Coatedwith Epoxy Polyester Powder. It Shall Involves An 8 Steptreatment. Final Finish Shall Consists Of Poxy Polyesterpowder Coating Of Approved Color & Shade With A Dry Filmthickness Of Minimum 40 Microns. The Testing Of Paint Shallbe Done For Various Physical & Chemical Properties As Peris: 101. The Material Shall Then Be Oven Baked With A
/bid Number: Gem/2025/b/6561795* /dated: 25-08-2025

& & / Bid Document1 / 35 Controlled Temperature Of 1800c To 2000c. Manufacturer/supplier Must Have Iso- 9001, 14001, Bifma & Ohsascertifications. Certificates Should Be Attached. Leveler:-itshould Have Leveler With M10 Screw Type Leveler Withhexagonal Plastic Base. , Steel Almirah Small : Size:-height 1270 Mm, Width 765mm, Depth 440 Mmconstruction: - The Almirah Should Have Welded Typeconstruction. The Thickness Of Back Panel Should Be 0.8mm, Other Components The Thickness Should Be 0.9mm Andthe Shelf Thickness Should Be 1.2 Mm Doors & Handles: -the Almirah Should Be Provided With Full Height Steelhinged Door & Should Have Handle. Locking: The Almirahshould Have 3 Way Locking Mechanism With Shooting Boltarrangement. Shelves & Load Bearing Capacity: - Thealmirah Should Have Height Wise Adjustable Shelf Mountingand Uniformly Distributed Load Capacity Per Each Full Shelfshould Be 80 Kg Maximum And Shelves Should Be 3 Innumber And Should Be Fully Adjustable Shelves. Powdercoating Process: - All The Metal Parts Shall Be Given Antirustsurface Treatment & And Shall Be Powder Coated With Epoxypolyester Powder. It Shall Involves An 8 Step Treatment. Finalfinish Shall Consists Of Poxy Polyester Powder Coating Ofapproved Color & Shade With A Dry Film Thickness Ofminimum 40 Microns. The Testing Of Paint Shall Be Done Forvarious Physical & Chemical Properties As Per Is: 101. Thematerial Shall Then Be Oven Baked With A Controlledtemperature Of 1800c To 2000c. Manufacturer / Suppliermust Have Iso- 9001, 14001, Bifma & Ohsas Certifications.certificates Should Be Attached Leveler:- It Should Haveleveler With M10 Screw Type Leveler With Hex Plastic Base , Fully Plastic Moulded Chair With Arms Seat &backcushioned : Size - Total Height : 820mm + 10mm, Totalwidth : 565mm + 10mm, Total Depth : 565mm + 10mm&total Weight: 4.20 Kg + 50gms Cushioned Chair With Armscomprising Of Single Piece Moulded Frame Made Ofpolypropylene & Coated With Pu Coating Paint High Glossfinish With Seat & Back Cushion Made Of Moulded Pu Foamand Velvet Upholstery. Weight Of Moulded Polypropleneframe Is 4.2 Kg. , Executive Table/office Table : Thesize Of The Table In Mm Should Be 1500 X 600 X 728 Andshould Consist Of Following Parts: Top: Top Should Furtherconsist Of Work Surface Which Should Be 18mm Thick And Prelaminated Particle Board Plb. All Work Surface Edgesshould Be Duly Sealed With 2mm Thick Machine Fitted Pvcedge Banding Understructure: Understructure Shouldconsist Of The Following Components: A.rectangular Frame:rectangular Frame Should Be A Fabricated Component In1.2mm Thick Crca Is:513 With Powder Coat Epoxypolyester B.legs: Legs Should Be Fabricated Component In38mmx25mmx1.2mm Thick Ms Erw Tube Is:7138 Withpowder Coat Epoxy Polyester C. Plastic Cap For Cable:plastic Cap For Cable Should Be Made Up Of Injectionmoulded Polypropylene. D. Leveler Glide For Leg : Levelershould Be Made Of Nylon 6 & Consist Of Ms Bolt. Storage:storage Should Consist Of Pedestal. The Pedestal Shouldfurther Consist Of A. Shell Which Should Be 0.6mm Thickcrca Is:513 And Should Have Powder Coat Epoxypolyester As Finish. B. Drawer Tray Which Should Be 0.6mmthick Crca Is:513and Should Have Powder Coat Epoxypolyester As Finish C. Drawer Front Which Should Be 0.8mmthick Crca Is:513 And Should Have Powder Coat Epoxypolyester As Finish D. Frame Assembly Which Should Be1.2mm Thick Rca Is:513 And Should Have Powder Coatepoxy Polyester As Finish. E Lock Which Should Be 10



//bid Details2 / 35 Lever Cam Lock F. Handle Which Should Be Made Ofinjection Moulded Polypropylene G. Leveler Which Should Bemade Up Of Nylon 6 And Should Also Consist Of Ms Boltpowder Coating Process: All The Metal Parts Shall Be Givenantirust Surface Treatment And Shall Be Powder Coated Withepoxy Polyester Powder. It Shall Involves An 8 Steptreatment. Final Finish Shall Consists Of Poxy Polyesterpowder Coating Of Approved Color & Shade With A Dry Filmthickness Of Minimum 40 Microns. The Testing Of Paint Shallbe Done For Various Physical & Chemical Properties As Peris: 101. The Material Shall Then Be Oven Baked With Acontrolled Temperature Of 1800c To 2000c. Manufacturer /supplier Must Have Iso- 9001, 14001, Bifma & Ohsascertifications. , Library Almirah Steel Glass Frontcabinet : The Size Of The Almirah Should Be Of 915 Mm Wx 486mm D X 1981 Mm H Construction & Material: - Itshould Have Welded Construction Using 0.8 Mm Thick Crcavirgin Steel For Shelf & 0.9 Mm Thick Crca For All Othercomponents. Door Glasses Thickness 5mm Should Be Fittedto Full Height Steel Frame. Minimum 6 Lever Locking 2 Waylocking Mechanism With Shooting Bolt Should Be Provided.standard Size Handle To Be Provided Should Be Chromeplated Brass Handle Shelving: Height Wise Adjustableshelves 4 Nos Should Be Provided. Uniformly Distributedload Capacity Per Full Shelf Should Be 80 Kg Maximumleveler Should Be Provided Which Consist Of M10 Screw Typewith Hexagonal Plastic Base. Add 10mm To Unit Height Andadditional 10mm For Adjustment. Powder Coating Process:all The Metal Parts Shall Be Given Antirust Surface Treatment& And Shall Be Powder Coated With Epoxy Polyester Powder.it Shall Involves An 8 Step Treatment. Final Finish Shallconsists Of Poxy Polyester Powder Coating Of Approved Color& Shade With A Dry Film Thickness Of Minimum 40 Microns.the Testing Of Paint Shall Be Done For Various Physical &chemical Properties As Per Is: 101. The Material Shall Thenbe Oven Baked With A Controlled Temperature Of 1800c To2000c. Manufacturer Quality & Safety Assurancecertificationmanufacturer / Supplier Must Have Iso- 9001, 14001, Bifma & Ohsas Certifications. , Laboratory/library/canteen Table : Overall Size: 1800 Mm W X900mm D X 740mmh +- 10mm Tolerance On Overallsizes. Frame:legs Of Table Frame Should Be Made Of Erwround Pipe Of 48mm+- 1.0mm And 1.5mm Thickminsupports Shall Not Be More Than 160mm From The Floor Levelwhen Measured Frombottom Of Pipe Two Supports Of Thesame Pipe Should Be Provided Breadth Wise In Betweenthelegs Of The Frame And Two Supports Should Also Beprovided Length Wise Between Legs Supports Are Welded Toeach Other Properly. The Frame Top Should Be Made Of Msangle Iron Size38mmx38mmx5mmmin.. The Bottom Of Legsshould Be Closed With Metal Shoes. Top:top Should Be Madeout Of 18mm +-1.0mm Commercial Board Fixed With Goodquality Sunmica 0.75mm Thick. Shade Of Sunmica Top Shouldbe Natural Teak/ Baverian Beach. All The Edges Of Thesunmica Top Should Be Fixed With Teak Beading Duly Spiritpolished. Finish All Steel Components Are To Be Prepared Fordegreasing And Derusting. After Pretreatment, The Steel Steelcomponents Are To Be Epoxy Powdercoated. Thickness Ofpowder Coatingshould Be 50-60 Micron Min. Shade Ofpowder Coating Should Be Nickle Grey/ Seimn Grey. , Drawing Stool : Seat Assembly: It Is Circular Type 30.0 0.5cm And Made Up Of 0.1 0.012 Cm Thickness Crsteel. It Is Welded To The Understructure And Coated Withblack Epoxy Polyester Powder Dft 50-80 Microns. in Kapurthala - Punjab has been published.
The last date of this tender is 09/09/2025, work value is  0 (Refer Doc) INR, EMD is  0 (Refer Doc) INR and tender document fees is  0 (Refer Doc) INR
For more details call us on +91 92760 83333 for bidding support this tender, GeM, vendor registration (if any) and tender BOQ documents.