Notice Inviting Tender (NIT) by the State Government Of Rajasthan for Construction Work At Govt Sr. Sec. School Munabao Block Gadra Road Earth Work In Excavation By Mechanical Means Hydraulic Excavator/ Manual Means In Foundation Trenches Or Drains Not Exceeding 1.5 M In Width Or 10 Sqm On Plan Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Taking Out The Excavated Soil And Depositing And Refilling Of Jhiri With Watering & Ramming And Disposal Of Surplus Excavated Soil As Directed With In A Lead Of 50 Meter. All Kinds Of Soils P.C.C. In Foundation Providing And Laying In Position Cement Concrete Including Curing Compaction Etc. Of Specified Grade Excluding The Cost Of Centering And Shuttering All Up To Plinth Leve 1:4:8 Is 456-2000 1Cement :4 Course Sand :8 Graded Stone Aggregate 40 Mm Nominal Size Random Rubble Stone Masonary For Foundation And Plinth In Cement Sand Mortar Above 30 Cm. Thick Wall Is-1597 Part-I 1992 In : Cement Mortar 1:6 1-Cement:6-Sand. Dpc:Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Including Curing Compaction Finishing With Rendering In Cement Sand Mortar 1:3 1-Cement:3-Coarse Sand And Making Good The Joints Excluding The Cost Of Centering, Shuttering And Reinforcement. All Work Up To Plinth Level : 1:1.5:3 1-Cement:1.5 Coarse Sand:3-Graded Stone Aggregate 20 Mm Nominal Size Supply & Stacking Good Earth At Site Complete Including Loading, Unloading And Transportation Etc &Filling Available Excavated Earth Excluding Rock In Trenches Plinth Side Of Foundation Etc. In Layers Not Exceeding 20 Cm. In Depth, Consolidating Each Deposited Layer By Ramming And Watering Including Lead Upto 50 Mtr. And Lift Upto 1.5 Mtr. Stone Masonry In Super Structure-Random Rubble Stone Masonary For Superstructure Above Plinth Level One Storey Height Above 30 Cm. Thick Walls In : Cement Mortar 1:6 1-Cement:6-Sand. Wall Up To 30 Cm. And Less Thickness. Supplying And Fixing Stone Lintels/Bed Plates Of Approved Quarry Rough Dressed In Cm 1:4 Upto 15 Cm Thick Pillar Masonary:- Random Rubble Stone Masonary For Superstructure Above Plinth Level One Storey Height Above 30 Cm. Thick Walls In : Cement Mortar 1:4 1-Cement:4-Sand. Wall Curved In Plan To Mean Radius Not Exceeding 6 Mtr. Pillar Masonry Including Bed Plates As Per Specifications. Bed Plate To Be Paid Separately. Stone Kharanja: Random Rubble Dry Stone Kharanja Under Floor Lintel Beams:-Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs, Girders Having Slopes Up To 150, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Windows Sills, Staircases And Spiral Staircases, Up To Floor Three Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 1-Cement:3-Coarse Sand And Making Good And Joints Excluding The Cost Of Centering, Shuttering And Reinforcement:1:1.5:3 1-Cement:1.5 Coarse Sand:3-Graded Stone Aggregate 20 Mm Nominal Size. Slab & Beam:-Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs, Girders Having Slopes Up To 150, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Windows Sills, Staircases And Spiral Staircases, Up To Floor Three Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 1-Cement:3-Coarse Sand And Making Good And Joints Excluding The Cost Of Centering, Shuttering And Reinforcement:1:1.5:3 1-Cement:1.5 Coarse Sand:3-Graded Stone Aggregate 20 Mm Nominal Size. Centering And Shuttering With Plywood Or Steel Sheets Including Strutting, Propping, Bracing Both Ways With Wooden Members And Removal Of Formwork For Superstructure Up To 4.5 Mtr Above Plinth, For: Suspended Floors, Roofs, Landings, Staircases, Balconies, Girders, Cantilevers, Bands, Coping, Bed Plates, Anchor Blocks, Sills, Chhajjas Lintel, Beam Etc. Centering And Shuttering With Plywood Or Steel Sheets Including Strutting, Propping, Bracing Both Ways And Removal Of Formwork For Foundations In Basements Rafts, Footings, Strap Beams, Bases Of Columns, Etc. Up To Plinth Level. Providing And Fabricating Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding Including Cost Of Binding Wire All Complete Up To Floor Three Level. Tremo Mechanically Treated Bars Tata, Sail, Vizac-Rinl Half Brick Msonary In Superstructure Above Plinth Level Uoto Floor V Level Using F P S Bricks Of Designation 75 In Cement Mortar 1:6 Providing And Fixing M.S. Sheet 1Mm Thick Double Leaf Door Shutter Windows In Angle Iron Frame 35X35x5 Mm Suitabilly Diagonally Braced With 25X3mm Flat Iron Above And Below Lock Rail Of Size 50X5mm Beading Extra Including All Fittings, As Per Direction Of Engg. Incharge But Excluding Cost Of Chowkhats: Including Two Coats Of Anit-Corrosive Red Oxide Primer Paint Glazed Window : Providing And Fixing Steel Glazed Doors Windows And Ventilator Shutters Of Standard Rolled Steel Section Joints Mitred And Welded With Steel Lugs 13 X 3 Mm, 10Cm Long Embeded In Cement Concrete Block 15 X 10 X 10 Cm Of 1:3:6 1 Cement: 3 Course Sand : 6 Gradred Stoneaggregate 20Mm Nominal Size Or With Wooden Plugs And Screws Or Rawl Plugs And Screws With Fixing Clips Or With Bolts And Nuts As Required Including Providing And Fixing Of Plain Glass Panes 4 Mm Thick With Copper Glazing Clips And Special Metal Sash Putty Of Approved Make Or Metal Beading With Screws Complete Including Priming Coat Of Approval Steel Primer, Excluding Cost Of Metal Beading And Other Fitting Except Necessary Hinges Of Pivots Steel Handles Peg Stay Etc. As Required : Partly Fixed And Partly Openable Fixed Area Not To Exceed 33% Wire Gauge Supplying & Fixing Fixed Wire Gauge To The Metal Frame Of Rolled Section By Metal Beading 20X3mm With Suitable Screw At Not Exceeding 150Mm Distance. 14 Mesh X 24 Gauge Guard Bars: Providing And Fixing Square Bars Or Other Flat Welded To Window/Ventilators Etc., Guard Bar 12 X12mm Kota Stone Slab Flooring 25 Mm Thick Over 20Mm Average Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete With Base Of Cement Mortar 1 : 4 1 Cement: 4 Course Sand For Area 2001 To 5000 Sq. Cm Kota Stone Slabs 25 Mm Thick In Risers And Steps Skirting, Dado And Pillars Laid On 12 Mm Averagethick Cement Mortar 1:3 1 Cement: 3 Course Sand And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete For Area Of Each Slab Upto 901 Sq. Cm Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finished: 25 Mm Thick. Pointing On Stone Masonry In Cement Sand Mortar 1:3 Deep Grooved Plasterceiling: 6 Mm Thick Cement Plaster To Ceiling Of Mix 1:3 1 Cement: 3 Fine Sand Providing And Laying In Position Cement Concrete Including Curing Compaction Etc. Of Specified Grade Excluding The Cost Of Centering And Shuttering All Up To Plinth Leve 1:2:4 1Cement :2 Course Sand 4 Graded Stone Aggregate 20 Mm Nominal Size Gola Providing Gola 75Mm X 75Mm In Cement Concrete 1:2:41 Cement: 2 Coarse Sand: 4 Stone Aggregate 10 Mm And Down Gauge Including Finished With Cement Mortar 1:31 Cement: 2 Fine Sand As Per Standard Design. Internal Finishing: Distempering With Oil Bound Washeble Distemper Of Approved Brand And Manufacture To Give An Even Shade Including All Scaffolding New Work Two Or More Coats Over And Including Scrapping And Priming Coat With Cement Primer Exterior Finishing :- Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade Including All Scaffolding. New Work Two Or More Coat Applied @1.67/ Ltr/10 Sqm Over And Including Base Coat Of Water Proofing Cement Paint Applied @ 2.20 Kg/ 10 Sqm. Panting On Doors & Windows :- Painting With Syntheitic Enamel Paint Of Approved Brand And Manufacture In All Shade To Give An Even Shade New Steel Work 2 Or More Coat On New Work. Copping: Cement Concrete Flooring Grade 1:2:4 1-Cement:2-Coarse Sand:4-Graded Stone Aggregate Rounding Off Edges Etc. But Excluding The Cost Of Nosing Of Steps Etc. Complete : 50 Mm Thick With 20 Mm Thick Nominal Size Aggregate. P&F Rigid Pvc Pipe Is:4985 Mark Class Ii/ 4 Kg. /Cm2. Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. 110 Mm Dia P&F Rigid Pvc Pipe Fittings Is: 4985 Mark Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant: Bend 87.5 110Mm Dia Pipe Clip 110 Mm Dia Providing And Fixing Steel Gate, Grating, And Grills Made Of Angles, Tees, Square Bars, Flats, Or Black Pipe With Holdfast And Fittings Complete As Per Design And Drawing Including Cutting Welding And Fabrication With Priming Coat Of Red Oxide. Part-B Electric Work Based On Bsr Pwd 2013, Jaipur Circle Wiring Of Light Point/Fan Point/Exhaust Fan Point/ Call Bell Point With 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Conductor 1.1 Kv Grade And 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Earth Conductor 1.1 Kv Grade Is: 694 Of Approved Make Group-2 Light Point Short Point Up To 3 Mtr. Medium Point Up To 6 Mtr Long Point Up To 10 Mtr Fan Point Wiring Of Light Point/Fan Point/Exhaust Fan Point/ Call Bell Point With 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Conductor 1.1 Kv Grade And 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Earth Conductor 1.1 Kv Grade Is: 694 Of Approved Make Group-2 Short Point Up To 3 Mtr. Medium Point Up To 6 Mtr Long Point Up To 10 Mtr Wiring Of 3 Pin 5 Amp. Light Plug Point With 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Conductor 1.1 Kv Grade And 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Earth Conductor 1.1 Kv Grade Is: 694 Of Approved Make In Surface/Reces Group - On Board S & F Follwing Sizes Dia. Of Isi Marked Medium Duty Pvc Conduit Along With Accessories In Surface/ Recessed Using Clamps, Fastener As Required Including Cutting The Wall, Covering Conduit With Wire Mess And Making Good The Same As Required. Group-2 25 Mm Dia in Barmer - Rajasthan has been published.
The last date of this tender is 22/01/2021, work value is  0 (Refer Doc) INR, EMD is  14460 INR and tender document fees is  1500 INR
For more details call us on +91 92760 83333 for bidding support this tender, GeM, vendor registration (if any) and tender BOQ documents.