Filters

List of bolts-and-nuts Tenders

List of latest bolts-and-nuts Tenders in Indian Tenders. Click on any bolts-and-nuts Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for bolts-and-nuts Tenders.

All-Tenders (182)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :35869257 | 18 Nov, 2025

Tender Value : 5.60 Lacs

Saharanpur - Uttar Pradesh

Tender for safely cartage of pcc pole 8.5 mtr. long from esc, sre to the site of work including loading unloading at both ends. (dist. up to 30 km.) safely cartage of pcc pole 11 mtr. long from esc, sre to the site of work including loading unloading at both ends. (dist. up to 30 km.) safely carriage of line material esc sre to site of works through privet vehicle including loading and unloading at both ends. (distance 0 to 30 k.m.) safely carriage of 11 kv ct/pt metering combine unit from esc sre to site of work including loading and unloading at both ends. safely carriage of 11 kv metering cubical 30/5 a from esc sre to site of work including loading and unloading at both ends. safely carriage of 11 kv xlpe cable 3x70 sq.mm from esc sre to site of work including loading and unloading at both ends. safely carriage of weasel conductor from esc sre to site of work including loading and unloading at both ends. safely carriage of rabbit conductor from esc sre to site of work including loading and unloading at both ends. safely carriage of 11 kv xlpe cable 3x120 sq.mm from esc sre to site of work including loading and unloading at both ends. fabrication and erection of double pole on pcc pole 8.5/11 mtr. long with complete fitting of all accessories of 11kv/ lt line as per respo specification. erection of single support on pcc pole up to 11/8.5 mtr long with complete fitting of all accessories of 11 kv/lt as per respo specification providing and fixing of gi pipe 6” dia earthing of pole by earthing rod. providing and fixing of clamp with nut & bolt concreting of pole laying, lifting, stringing, sagging jumpring & binding of acsr weasel conductor for 11 kv/lt line as per respo specification including complete. laying, lifting, stringing, sagging jumpring & binding of acsr rabbit conductor for 11 kv/lt line as per respo specification including complete. providing and fixing of stone pad 300x300x75 mm providing and fixing of danger board with clamp providing and fixing of barbed wire safely installation of 11 kv ct & pt metering combine unit 30x/5 a safely installation of 11 kv metering cubical 30/5 a grouting and fixing of stay rods by digging of pits in block of 600x600x300 mm. & with new brick and nozzling of stay wire 7/10 swg and fitting the same on the pole concreing of stay laying of 11 kv xlpe cable 3x70 sq.mm laying of 11kv xlpe cable 3x120 sq.mm for line crossing making and filling the 11 kv cable jointing kit indoor/outdoor type size 3x70 sqmm. sq.mm as per respo specification. making and filling the 11 kv cable jointing kit indoor/outdoor type 3x120 sqmm. sq.mm as per respo specification. fabrication charge of channel and angle

Central Government/Public Sector

TRN :35869261 | 22 Nov, 2025

Tender Value : 0

Jodhpur - Rajasthan

Tender for gem bids for upgrading oblice improving of receive and dispatch area atge ep jodhpur, dismanting of all old unsv items fromexisting receive and dispatching area and re as per rfp, sand f lathing ms draw hollow tunnel of size 75x40mmx2point 5mm thick section 3963 mm long, s and f balusterms draw hollow tunnel of size 100x50x3 mm section 4573mm long complete, s and f truro ms draw hollow tunnel ofsize 100x50x3 mm section length as per ground condition, sand f superior quality double leaf easy move mild steeldoor of size 1450x2150 mm fabricated out of wrinkle free2mm thick hr sheet with following, m and l for cementconcrete in foundation 04 nos witth 1 3 6 of size300x300x750 mm, m and l for cement concrete in pccflooring with 1 3 6 of size 3960x4750x100 mm approx, sand f long durable uv exposure cold rolled enhancedaesthetic appeal and highly corrosion resistant profiledsheet with organic coating, s and f superior quality glazeddouble leaf casy move mild steel ventilator 02 nos of size400x900 mm, s and f mild steel draw fine threadedfoundation bolt 12 mm dia 350 mm long with double washerand nut 16 nos, s and f side supports ms draw hollowtunnel of size 75x40x2 point 5 mm thick length as under, sand f self screw 25 mm long 210 nos, s and f electricalappliances have point wiring with 1 point 5 sqmm oblice 2point 5 as per rpf

Central Government/Public Sector

TRN :35869366 | 24 Nov, 2025

Tender Value : 0

Tinsukia - Assam

Tender for gem bids for mt, cross assy, rep kit cmc, rep kit csc, assy cablecomplete, rear hub seal, relay starter solenoid, solenoid switch24v, belt v ribbed, banjo bolt, thrust washer, strainer fuel, filter fuel, wheelcyl 44 mm dia, wheel cyl 38 mm dia, tank coolantvehicular, starter motor assy, timing belttensioner, pump assy fuel, starter relay 24v 50a, armature assy, field coil assy, 352 dia clutch discassy, temp sensor, asessories kit wiper, bearingdrive shaft, deleted centre bolt no1

Central Government/Public Sector

TRN :35869498 | 03 Dec, 2025

Tender Value : 27.00 Lacs

Chennai - Tamil Nadu

Tender for gem bids for sitc, supply of conventional type earthing using 600x600x315mm copper plates-copper strips size 25x3mm of requiredlength purity of copper greater than 90 percent with labcertif - charcoal and salt etc., supply of equipotential earthbar -eeb- copper purity of copper greater than 90 percentwith lab certificate for equipotential bonding for connectingthe earth 120x60x6, suitable enclosure made of uvresistant polycarbonate rated minimum ip65 for eebcovering., supply of copper cable for earth bonding size 35sq mm 1 core green colour as per is 694 laying through40mm b class gi pipe for connecting earth-pits with eeb, supply of gi pipe 40mm b class for laying copper cable, supply of bimetallic connectors for non- copper to copperconnection, supply of solar based aviation obstructionlights, supply of surge protection device, suitableenclosure made of uv resistant polycarbonate ratedminimum ip65 for spd, supply of accessories- brass boltsand nuts, ss fitting clamps, ss 304 nut bolts, ss tie gi bendetc. concrete foundation, tags for proper marking ofterminals etc., installation, testing and commissioningcharges

Central Government/Public Sector

TRN :35870377 | 24 Nov, 2025

Tender Value : 0

Ghaziabad - Uttar Pradesh

Tender for gem bids for ridger complete as per specification alongwith one extrahub with bearing, nut bolt, washer 9.52 mm, washer 6.35mm, harrow bush 152.40 mm, harrow nut, harrow cupnut, harrow inner lock, harrow pipe side plate by roundplate, square rod 25.40 mm for tech use, pressure pipe, water tank 500 ltrs with double lair, submersible cable 6mm by 8 mm 3 core

Central Government/Public Sector

TRN :35872127 | 22 Nov, 2025

Tender Value : 0

Dimapur - Nagaland

Tender for gem bids for bty 12v 92 ah, oil filter, push rod tube seal, tappet covergasket set, fan belt, fuel flexible pipeline 19 mm, brushcarrier, field coil for self starter, bendix drive, dcindication lamp, ac indication lamp, rotating diod, connector 4 pole 63 amp, stop solenoid sw with adaptor, rectifier plate, self starter bush, carbon brush set, selfstarter solenoid, alternator regulator tr-15, starter pinion, fuel gauge, hrs mtr, volt meter, fuel filter, overflowpipeline 2 inch, bty 12v 88 ah, air filter, self str field coil, rectifier plet, alternator carbon brush, alternator slip ring, ignition switch, amp meter, su, avr, 10 sqmm cable 2core, fuel pipe, oil pipe, coupling, armature for selfstarter, 4 st relay, oil temp gauge, bridge rectifier, btyterminal positive and negative with lead, fan belt a4 type, thimble 25mm, cable 2 core 10 sqmm aluminium, wireflexible 2.5sqmm copper, change over switch 63amp, btyterminal, benjo bolt, benjo washer, socket set tools kit, insulation tape, fuel lifting pump, fuel filter 1.1ltr, fuelfilter micro, bty 12 v 180 ah, engine stop solenoide, doorhinges, oil pressure switch, fan belt, altenator belt, change over switch 100amp, socket set taparia, armdcable 4 core 35 sqmm, dc altenator, hose clamp, fuelpressure pipe, ignition key, terminal block, float btycharger, lub oil pressure sensor, set of copper washer10mm, hose for air cleaner, alternator regulator assy, fuel line tank to feed pump, fuel line feed pump to filter, mcb 100amp 4 pole, service cable 6 sqm x 2 core, ugarmd cable 16 sqm x 3.5 core 100mtr roll

State Government

TRN :35872481 | 04 Dec, 2025

Tender Value : 0

Nagarkurnool - Telangana

Tender for supply of different sizes of bolts and nuts, flanges, elbows, and 150nb gate valves, web nylon slings required for turbine and its auxiliaries maintenance works at slbhes, srisailam dam west

Central Government/Public Sector

TRN :35873046 | 22 Nov, 2025

Tender Value : 0

Thiruvallur - Tamil Nadu

Tender for gem bids for copper alloy taps/stop valves v2 conforming to is 8931q3, bathroom water shower v2 q3, towel rail / ringfor bathroom q3, soap dish - case q4, waste fittingsfor washbasin and sinks as per is 2963 q3, floor draintraps q3, stainless steel shelf rack q3, plastics bibtaps pillar taps angle valves and stop valves as per is9763:2000 latest q3, water fittings - copper alloy floatvalves horizontal plunger type as per is: 1703 q4, waste pipe q3, connection pipe with nuts v2 q3, sinks q3, flushing cistern q3, rotational mouldedpolyethylene water storage tanks v2 conforming to is12701 q3, toilet seat covers v2 q4

Central Government/Public Sector

TRN :35873112 | 24 Nov, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for gem bids for ramp assembly removing the vehicles and taken to themachine shop stripping all parts cleaning the burning oilseats springs o rings change and ramp assembled andtested, exhaust brake full device and over hauling andtesting, transfer case mounting bracket, transfer casemounting bolt male and female, rotating switch, handbrake assembly, the above mentioned old parts removingand servicing new parts fitting mechanical charges and fullelectrical system checking and service, 4x4 assemblyremoving and checking electrifying fault defective andmechanical defective rectified and 4x4 assembly systemoperated and testing, clutch booster, above partsremoving and fitting electrical system full checking andburned damaged looms and lighting service and testingelectrical and mechanical labour charges, brake shoe liningwith rivet, brake cylinder wheel cylinder front and rear, brake m cylinder, clutch cylinder, sleeve cylinder, brakedrum skimming, brake system full removing the vehiclebrake drum skimming after fitting the drum, brake shoelining fitting and above brake m cylinder, self starterassembly stripping checking armature field coil solenoidbendex brush brush holder damaged armature re-winding, self assembly removing the vehicle stripping checking allparts armature field coil solenoid burned armature re-winding field coil, clutch plate, pressure plate, releasebearing, clutch master cylinder, bty cult of switch 24v, ignition switch, fly wheel skimming and service, cabinshock absorber, 4x4 assembly, the vehicle electricalsystem full checking and burned damaged looms changeignition switch battery cut off switch fitting and full lightsystem service and testing charges, gear box assemblyremoving the vehicle old clutch plate pressure plate releasebearing fly wheel removing and gear box service, exhaustbrake system removing and electrical fault rectified andmechanical fault removing and brake system mounting thevehicle and brake tested, ramp assembly repair servicewith damaged and burned oil seal springs o rings changeand ramp assembled and tested, van pump assembly notworking repair service with new packing kit and pressuretesting, door lock assembly, relay 12v and 24v, doormechanism, the above mentioned all parts removing andnew parts fitting and vehicle testing mechanical charges, all electrical system repair service burned looms and relaychange full lighting system head lights tail lights indicatorscabinets lights checking and service labour charge, rotaryswitch, ramp assembly repairs and service with damageseal kit spring and o rings, the above mentioned partsremoving and new parts fitting

Central Government And Public Sector

TRN :35873150 | 03 Dec, 2025

Tender Value : 23.45 Lacs

Chamba - Himachal Pradesh

Tender for gem bids for nitrile coated hand gloves cut level 2, tapershank mt drill sleeves mt1-2, mt1-3, mt2-3, mt3- 4, mt-4-5, mt5-6, slugging spanner 30mm, hammeringspanner open ended 42 mm, double ended spannersets 6 to 32 mm, double ring spanner sets 6 to 32mm, allen key set, hand tap set 20x2.5 mm, hss tapset 30 mmx3.5 mm, hss tap set 36 mmx4.0 mm, hsstap set 48 mmx3.0 mm, hand tap set 0.25 inch npt 3pcs, hand tap set 0.75 inch npt 3 pcs, labyrinth gapplugs of cps2 as per dwg ss 304, hex head boltwith nut m16x2.0x90mm material ss304, hexagonalsocket head cap screw m12x1.75x50 length, bolt m8x40 full thread with nut and double washer, copper washer 16 mm, copper washer size 20mm nb, hex nut m-48, plain washer m16, m s plain washer m20, ms plain washer m24, washer m30, mild steelblack coated, ss nuts for m12 bolt, s.s. aisi 304hex nut m20, hex nut m20, ms threaded rod 10 mmclass 8.8 length one meter with nut and washer onboth ends, ms threaded rod 16 mm class 8.8 lengthone meter with nut and washer on both ends, thread rod with nut length 1 mtr. m 12mm, ss 304, thread rod with nut length 1 mtr. m 16mm, ss 304, thread rod with nut length 1 mtr. m 20 mm, ss 304, threaded rod size m24, stainless steel, grade 304, connection both ends male 0.375 inch npt ss316, connection both end male 0.75 inch npt ss 316, three jaw self centering chuck 200, 4-jaw chuckfor lathe, overall diameter-300 mm, shim cutter 6-8 inch length, welding earth clamp, paintingbrush 75mm, grinding flap disc ag7 grit size 80, wheel for bench grinder, 150 x 25 x 31.75 mm, grit120, wheel for bench grinder, 150 x 25 x 31.75 mm, grit 40, wheel for bench grinder, 300 x 32 x 50 mm, grit 100, wheel for bench grinder, 300 x 32 x 50 mm, grit 40, wheel for bench grinder 8inch x 0.75 inch x1inch grit 120, wheel for bench grinder 8inch x0.75inch x 1inch grit 60, key bar 10x6 sq.mm l-500 mmss304, key bar 14x6 sq.mm l-500 mm ss 304, key bar16x6 sq.mm l-500 mm ss304, led panel light 25 w, industrial grade switch boards, ip 66, 25 amp, malmal cloth white, precision blue colour tubefor blue matching, ss ball valve 20 mm, screwedends, ptfe sealing, ss ball valve 0.5 inch, stainlesssteel shim 0.020mmx350mm, stainless steel shim0.05mm x 350mm width, stainless steel shim0.070mmx350mm, ss shim size 0.1 mm x 350 mm, ssshim size 0.20 mm x 350 mm, ss shim size 0.30 mm x350 mm, ss shim size 0.50 mm x 350 mm, ss bolt dualwasher and nut m12x80 mm, ss bolt with nut andwasher m16x90 stainless steel type 304, wool feltstrip as per is1719 hard density of size 12.7 mm-t40mm-w 750mm-l, wool felt strip as per is1719 harddensity of size 12.7 mm-t 40mm-w 550mm -l, emerypaper no. 600, emery paper no. 800, filler gauge0.05 mm to 1.0 mm 6 long, filler thickness gaugegauge 0.03 to 1 mm, 300mm length, sight glasstubular, o d 15.5mm, i d 11.5mm, length 15 inch, anchor bolt 12mm, anchor bolt, 16mm, anchorbolt, 20mm, freight charge

Related Sub Industries : Fasteners

List of bolts-and-nuts Tenders

Tender for supply of different sizes of bolts and nuts, flanges, elbows, and 150nb gate valves, web nylon slings required for turbine and its auxiliaries maintenance works at slbhes, srisailam dam west

Get Bolts And Nuts Tender Alert...

Related Sub Industries : Fasteners

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us