Filters

List of m-s-product Tenders

List of latest m-s-product Tenders in Indian Tenders. Click on any m-s-product Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for m-s-product Tenders.

All-Tenders (166)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :34834106 | 01 Aug, 2025

Tender Value : 0

Tawang - Arunachal Pradesh

Tender for gem bids for as, fall ceiling oblique e board of size 6mm thick 600x600mmwith acessories make - everst and equvilant job no 2629mta warm light make - havells bajaj crompton andequvilant plywood 4 feet x 8 feet x 6mm termite resistantand bwr cofirming to is 1328-1996 make - supremeassam green ply kit ply isi mark pvc tape insulation 25mm wide 5 mtr long make - steelgrip anchor kinjal cablexlpe insualted screened pvc bedded galvanised steel stripduty 1100 volts grade with multi stranded aluminumconductor of size 25 sqmm 4 core as per store list plywood4 feet x 8 feet x 12mm termite resistant and bwrcofirming to is 1328-1996 make - supreme assam greenply kit ply isi mark cgi sheet 12 feet x 3 feet make - sailtata jindal plywood 8 feet x 3 feet x 12mm thick termiteresistant and bwr confirming to is 1328-1996 make -supreme green ply kit ply plywood 8 feet x 4 feet x 4mmtermite resistant and bwr cofirming to is 1328-1996make - supreme green ply kit ply portabel collapsibleprotective wall baskets galvanished welded mesh frame 2cells per set of size 1232 x 0616 x 0769 mtr withcomplete accessories as per store list led tube lightfittings 15 w box type 4 feets with crca body pre coatedwhite and prewired for led tube complete make - havellsbajaj philips crompton stop cock t type chromiumplated brass 15 mm weight not less than 330 gm make -essess prayag johnson suisse peg set of six fitted withgalvanised screws along the internal surface of the walls inthe rooms make -ess ess prayag johnson suisse mcbspn 240 volts 32 amps make - havells l and t standard cable pvc insulated elecric cables heavy duty 1100 voltsgrade multi stranded copper conductor of size 25 sqmmsingle core frls confirming to is 1554 part-1 1988 make -havells finolex polycab pvc connection 45 cm long 15 bid number gem2025b6444864 dated 11-07-2025 bid document1 75 1 1 mm, make-supreme, johnson suisse, famingo, led bulkhead fitting high pressure die cast aluminum front coverwith glass cover with specially design gasket with led lamp10 watts, make - havells, bajaj, philips, crompton, mattress 6 feet x 3.5 feet, make - kurlon, sleepwell, corformand equilant., water dispenser of 230 v 500 watts withoutrefrigerator with normal cold and heating capacity of 5 ltsper hour with storage compartment and auto shut offfacility, make - voltas, lg, ushaand eqilant, cuttingpliers, make - taparia, venus, miranda, plywood 4 feet x 6feet x 6mm, termite resistant and bwr cofirming to is1328-1996, make - supreme, assam, green ply, kit ply, isimark, bib cock long spout brass chromium plated 15 mmweight not less than 330 gm, make -ess ess, prayag, johnson suisse, pvc switch board snow white size 8 inch x10 inch for main switches oblique db, make - supreme, polycab, finolex, pvc switch board snow white size 7 inch x4 inch for sockets and switches, make - supreme, polycab, finolex, switch piano 5 amp 230 volts flush type one waysnow white, make - anchor, ssk, cona, stop cock t typechromium plated brass 15 mm weight not less than 330gm, make -ess ess, prayag, johnson suisse, switch socketcombination snow white multipurpose 2 in 1, 15 amp 230volts, make - anchor, ssk, cona, mcb single pole 16 ampcapacity b series confirming to is 8828 of 1996, make -havells, l and t, standard, mcb sp 6 to 32 amps, make -havells, l and t, standard, angle holder, make - anchor, ssk, cona, chain link fencing single dip 75mmx75mmmesh, made up into matress or cages with 4mm dia mildsteel galvanised wire lapped straining and 1.8m width andmake -tata, sail, jsw as per store list, ms bar 8mm, 20feet long, make - tata, sail, jsw, ceramic tiles of size 600mm x 600 mm for floor thickness between 9 to 10 mm thick, make - johnson, kajaria, orient 1st quality confroming to is -156-2006, cement opc 53 grade packed in hdpe bag each50 kg wt conforming to is 8112 - 1989, make -birla gold, ambuja, ultratech, acc, jk, dalmia, change over switch100 amps, 4 pole, tpn confirming to is 13947 part - 3, 2607, make - havells, standard, l and t, cable xlpe insualtedscreened pvc bedded, galvanised steel strip heavy duty1100 volts grade with multi stranded aluminum conductorof size 16 sqmm 2 core as per store list, service cable pvcinsulated aluminium conductor, 1100 volt grade heavy dutyserved sheathed in service connection 10 sqmm 2 core, make - havells, finolex, plaza, plywood 4 feet x 8 feet x19mm termite resistant and bwr cofirming to is 1328-1996, make - supreme, assam, green ply, kit ply, isi mark, adhesive make - fevicol, door hinges 75 mm make isimarked, door handle for drawer, make - anjali, nails 1.5inch isi marked, nails 2 inch isi marked, nails 2.5 inch isimarked, black screw full thread 0.5 inch isi marked, blackscrew full thread 1 inch isi marked, black screw fullthread 2 inch isi marked, gi binding wire, make - tata, sail, jsw, steel screw size 3 inch full thread with rawl plugisi marked, 100 nos per pkt, exhaust fan 230 volts 300 mmsweep plastic body alongwith louvers and complete fittings, make - bajaj, havells, crompton, nails 1 inch isi marked, nails 3 inch isi marked, ppr socket 25 mm, make - sfmc, finolex, supreme, ppr elbow 90 degree 25 mm, make -sfmc, finolex, supreme, float valve 25 mm, make - sfmc, finolex, supreme, study chair of size length 56 cm, height82 cm and width 56 cm, type - lacquered finish with arm, seat and back cushion, velvet upholstery, make - supremeor equivalent, puf revit 75mm isi marked, ppgi roofing //bid details2 / 75 sheet 10 feet x 3 feet long and thickness 0.63 mm withgrard film. the ppgi sheet shall have minium coating of 4-5micron epoxy as per store list, ro 20 inch filter refer job no3662 of year 2016-17, cgi sheet 10 feet x 3 make - sail, tata, jindal, hdpe sand bag of size15 inch x 30 inch, ledtube light fittings 8 oblique 9w 230v box type 2 feets withcrca body pre coated white and prewired for led tubecomplete, make - havells, bajaj, philips, crompton, ledblub 10w, make - bajaj, crompton, havells, philips, towerbolt, make - isi marked, plywood 6 feet x 3 feet x 12mmthick termite resistant and bwr confirming to is 1328-1996 make - supreme, green ply, kit ply, stop cockangular type chromium plated brass 15 mm weight not lessthan 330 gm, make -ess ess, prayag, johnson suisse, cablepvc insulated elecric cables heavy duty 1100 volts grademulti stranded copper conductor of size 1.5 sqmm singlecore frls confirming to is 1554 part-1 1988, make -havells, finolex, polycab, iwc of vitreous china squattingpan orissa pattern of size 580mmx440mm, dark colouredwith p or s trap make- parryware, hindware, cera completein all respects., switch socket combination snow white 5amp 230 volts, make - anchor, ssk, cona, led blub 30wmake - bajaj, crompton, havells, philips, pvc casingcapping of size 1 inch medium grade snow white, make -presto, polycab, finolex, screw full thread 6 x 19 mm isimarked, 200 nos pkt, pvc l bend and t junction joint forpvc casing and capping confirming to is 3419 part 3 make -supreme, polycab, finolex, led street light 100 watt make- ledure, orient, led blub 15w make - bajaj, crompton, havells, philips, synthetic paint enamelled black confirmingto is 5-2004, make - berger, asian, nerolac, synthetic paintenamelled green confirming to is 5-2004, make - berger, asian, nerolac, synthetic paint enamelled white confirmingto is 5-2004, make - berger, asian, nerolac, acc blocks ofsize 24 inch x 8 inch x 4 inch thikness., srt 2440 x 613 x180, 2 mm thick ms sheet hot rolled steel with nuts andbolts incl one coat of red oxide, make -tata, sail, jsw, pvc water pipe 20mm, make - standred., looking mirror ofsize 600 x 450 mm with 4mm thick glass and 4 mm thickback ply, make - prayag, saint gobain, modigaurd, taflontape roll isi marked, make - supreme, omega, asbestos, solvent cement 150 gm tube, make- finolex, fit well, jindal, plastic water jaricane 18 ltr capacity, make -standred., holder pendent, make - anchor, ssk, cona, iron welding rod confirming to is 814-2002 isi marked, 3.15mm thick. 100 nos per pkt, water storage tank triplelayer 500 ltrs confirming to is 12701-1996, make - sintex, ultrapure aqua, polywell, window fibre glass 3 mm thickconfirming to is - 2835-1987 isi marked, glass puttyconfirming to is 419-1967 isi marked, nails 6 inch isimarked, synthetic paint enamelled og confirming to is 5-2004, make - berger, asian, nerolac, synthetic paintenamelled red confirming to is 5-2004, make - berger, asian, nerolac, synthetic paint enamelled yelow confirmingto is 5-2004, make - berger, asian, nerolac, 80 mm thickcoloured interlocking precast paver block any shape andsize confirming to is 15658- 2006, grade m-40, dome boxculvet c shape from top of size 2x2x1m., fasner screw12mm, 4 inch, chain 4 feet complete, oil bound distemperwhite washable quality of proprietary brand of make -nerolac, berger, asian, chain hook s type, sunkinglight, make standred., coarse sand free from vegetationfall ceiling/ e board of size 6mm thick 600x600mm withacessories . make: everst and equvilant, warm light, make: havells/bajaj/crompton and equvilant, plywood 4 x 8 x //bid details3 / 75 mm termite resistant & bwr cofirming to is 1328-1996make : supreme/ assam/ green ply/kit ply/isi mark, pvctape insulation 25 mm wide 5 mtr long make :steelgrip/anchor/kinjal, cable xlpe insualted screened pvcbedded, galvanised steel strip or wire armored electricpower cable heavy duty 1100 volts grade with multistranded aluminum conductor of size 25 sqmm 4 core, frls, confirming to is 7098 part-1 1998 make : havells/finolex /polycab, plywood 4 x 8 x 12mm termiteresistant & bwr cofirming to is 1328-1996 make :supreme/ assam/ green ply/kit ply/isi mark, cgi sheet12x3 make : sail/tata/jindal, plywood 8 x 3 x 12mmthick termite resistant & bwr confirming to is 1328-1996make : supreme/green ply/ kit ply, plywood 8 x 4 x 4mmtermite resistant & bwr cofirming to is 1328-1996 make: supreme/ green ply/ kit ply, portabel collapsibleprotective wall baskets, galvanished welded mesh frame2 cells per set of size 1.232 x 0.616 x 0.769 mtr withcomplete accessories including non woven geo-textilematerials 3 mm thick 300 gsm, shall be supplied as perschedule - ii., led tube light fittings 15 w box type 4 feetswith crca body pre coated white and prewired for led tubecomplete make : havells/bajaj/philips/crompton, stopcock t type chromium plated brass 15 mm weight not lessthan 330 gm make:-ess ess/prayag/ johnson suisse, pegset of six fitted with galvanised screws along the internalsurface of the walls in the rooms make:-ess ess/prayag/johnson suisse, mcb spn 240 volts 32 amps make :havells/ l&t/ standard, cable pvc insulated elecric cablesheavy duty 1100 volts grade multi stranded copperconductor of size 2.5 sqmm single core frls confirming tois 1554 part-1 1988 make : havells/finolex/polycab, pvcconnection 45 cm long 15 mm make:-supreme/johnsonsuisse/famingo., led bulk head fitting high pressure diecast aluminum front cover with glass cover with speciallydesign gasket with led lamp 10 watts make :havells/bajaj/philips/crompton, mattress 6 x 3.5, make : kurlon/sleepwell/corform and equilant., waterdispenser of 230 v 500 watts without refrigerator withnormal cold and heating capacity of 5 lts/hour with storagecompartment and auto shut off facility. make :voltas/lg/ushaand eqilant., cutting pliers make -make:taparia/venus/miranda, plywood 4 x 6 x 6mmtermite resistant & bwr cofirming to is 1328-1996 make: supreme/ assam/ green ply/kit ply/isi mark, bib cock longspout brass chromium plated 15 mm weight not less than330 gm make:-ess ess/prayag/ johnson suisse, pvc switchboard snow white size 8 x 10 for main switches / dbmake : supreme/polycab/ finolex, pvc switch board snowwhite size 7 x4 for sockets and switches make : supreme/polycab/ finolex, switch piano 5 amp 230 volts flush typeone way snow white make : anchor/ ssk/cona, stop cockt type chromium plated brass 15 mm weight not less than330 gm make:-ess ess/prayag/ johnson suisse, switchsocket combinationsnow white multipurpose 2 in 1, 15amp 230 volts make : anchor/ ssk/cona, mcb single pole16 amp capacity b series confirming to is 8828 of 1996make : havells/ l&t/ standard, mcb sp 6 to 32 ampsmake : havells/ l&t/ standard, angle holder make:anchor/ssk/cona, chain link fencing single dip75mmx75mm mesh, made up into matress or cages with4mm dia mild steel galvanised wire lapped straining & 1.8mwidth and binding with mild steel iron nuts as specified aspwe is-2721-2003. make:-tata / sail /jsw, ms bar 8mm

Central Government And Public Sector

TRN :34836848 | 05 Aug, 2025

Tender Value : 0

Kolhapur - Maharashtra

Tender for gem bids for procurement, work station, side table, low height storage, largeheight storage, meeting table, solid partition, partition, partly glazed doors, double leaf doors, doorfinish, wall panelling, roller blinds, pvc moulding, fasle ceiling, ceiling, wall paneling, flooring, skirting, low height partition, table, ac outdoor units, ac indoor units, ac low side work, ac indoor unitinstalltion, ac control cabling remote cabling, acrefrigerant piping, ac drain piping, ac power electricalcabling, ac 410 a gas required, ac ms fabricated standfor outdoor, ac civil work, ew mdb, ew ac control db, ew ac outdoor, ew cables, ew cable terminations, ew luminaires and fans, ew voice system, ew smartsystem

Central Government / Public Sector

TRN :34837116 | 07 Aug, 2025

Tender Value : 0

Vijayawada - Andhra Pradesh

Tender for supply of set of 03 cab ac items components consisting of 3 step down transformer 200 va 440v/ 110v- 05 nos. make: guru. 2 blower fan with housing ms lhs + rhs a+b- 05 sets. make: kki 3 blower fan with housing ms lhs + rhs a+b- 05 sets. makes: sidwal, intec and dre. note: 1 test certificate should be provided by firm along with the material. 2 the firms with past performance of the tendered/same items subject to submission of proof of documents such as pos/r note are only eligible..

Central Government/Public Sector

TRN :34838999 | 08 Aug, 2025

Tender Value : 0

Chennai - Tamil Nadu

Tender for supply of set of ms shim for wap7 locomotive, set consisting of 05 items.

Central Government/Public Sector

TRN :34842221 | 31 Jul, 2025

Tender Value : 1.60 Crore

Hyderabad - Telangana

Tender for procurement of various sizes of ms flanges on rate contract basis for two years period through against open enquiry.

State Government

TRN :34843231 | 30 Jul, 2025

Tender Value : 17.76 Lacs

Trivandrum - Kerala

Tender for gem bids for office chair v3 q2, steel shelving cabinets adjustabletype confirming to is 3312 v4 q3, metal beds v3 q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellercertificate requested in atc, oem authorizationcertificate, additional doc 1 requested in atc, additionaldoc 2 requested in atc, compliance of boq specificationand supporting documentin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?no -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension1 d /bid number: gem/2025/b/6405627; /dated: 15-07-2025 & & / bid document1 / 15 ; 9; 9 d d, , m m -- / / number of days for which bidwould be auto--extended7 o %o % ;5 ;5 ; ; /bid to ra enabledno 4 4 /type of bidtwo packet bid4 4 r r /primary product categoryoffice chair v3 s s & u & u /time allowed for technicalclarifications during technical evaluation2 days v v b b w w v v 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno s s /estimated bid value1776000 s s w w /evaluation methoditem wise evaluation/ y & y & /arbitration clauseno /mediation clauseno //bid details /emd detail b /requiredno /epbg detail > /advisory bankstate bank of india 4 %/epbg percentage%5.00 b /duration of epbgrequired months.38a. , , \ v < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. \ \ /beneficiary : director, sctimstsree chitra tirunal institute for medical sciences and technology sctimst, thiruvananthapuram, departmentof science and technology dst, ministry of science and technologydirector, sctimst /splitting2 / 15 ; / bid splitting not applied. /mii purchase preference /mii purchase preferenceyes /mse purchase preference /mse purchase preferenceyes1. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 2. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 3. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. s s s s / evaluation method item wise evaluation method contract will be awarded schedulewise and the determination of l1 will be done separately for each schedule.the details of item-consignee combination covered under each schedule are as under:3 / 15 s /evaluation schedules s /estimated value & / / item/category /quantityschedule 1208000office chair v332schedule 2800000steel shelving cabinets adjustable typeconfirming to is 3312 v432schedule 3768000metal beds v364office chair v3 32 pieces 5 5 1 2 & & % % % % ^ ^ < < % % 4 4 b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively u u /technical specifications u / as per gem category speci cation /speci cation u u /specificationname b b s s /bid requirementallowed valuesgeneralrequirementchair typenon-revolving and non-tilting chair with armrest, non-revolving and non-tilting chair without armrestunderstructurechair understructure typecantilever, legsunderstructure materialerw tube conforming to is : 1161 latest, aluminiumpipe hollow section conforming to is: 1285 latest, stainless steel ss 202, stainless steel ss 304, stainless steel ss 316, mild steel, solid woodthe shape of tubularsection of understructureround, square, rectangular, elliptical, nasection sizediameter/sides ofunderstructure19 mm, 22 mm, 25 mm, 30 mm, 19x19 mm, 25x25mm, 30x30 mm, 25x15 mm, 30x12 mm, 30x15 mm, 30x20 mm, 45x19 mm, 35x15 mm, 38x20 mm, naunderstructure wallthickness mm1, 1.2, 1.6, 2, 2.5, 3, na for woodcastoryes, noseatseat materialmoulded pu, pu foam, mesh, caned, hot pressedplywooddensity of pu used in seatkg per cubic meter< 30, >30< 40, >40< 50, >50, nathickness of pu used inseat mm< 30, >30< 40, >40< 50, >50, naminimum seat height fromfloor surface mm< 400, >400< 500, >500width of seat mm< 400, >400< 450, >450depth of seat mm< 400, >400< 450, >450seat upholstery materialmesh fabrics, polyester fabric, leatherette, leatherette with spacer fabric, leather, caned, moulded pu4 / 15 backrestbackrest base framematerialmild steel frame, hot pressed plywood, solid wood, injection moulded plasticbackrest materialmoulded pu, pu foam, mesh, caned, hot pressedplywooddensity of pu used inbackrest kg per cubicmeter< 30, >30< 40, >40< 50, >50, nathickness of pu used inbackrest mm< 30, >30< 40, >40< 50, >50, nawidth of backrest mm< 400, >400< 450, >450backrest height from theseat level> 350< 450, >450< 550, >550backrest upholsterymaterialmesh fabrics, polyester fabric, leatherette, leatherette with spacer fabric, leather, caned, moulded puarmrestarmrest typeoverhanging armrest, continuous armrest, mouldedarmrest continuously fitted with seat and back, moulded t armrest fitted with seat bottom, mouldedarmrest mounted to frame, without armrestarmrest movementadjustable, fixed, without armrestswarrantywarranty period in numberof years1, 2, 3, 4, 5 or higher year /speci cation u u /specificationname b b s s /bid requirementallowed valuesadditional specification parameters - office chair v3 32 pieces specification parameternamebid requirement allowed valuesremarksdetailed specification is included in buyer added bid specific atc. biddersshould submit declaration regarding the compliance of the specification.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; a o ; a /consignees/reporting officer and quantity5. .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1shiju v s695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, trivandrum3230steel shelving cabinets adjustable type confirming to is 3312 v4 32 pieces 5 / 15 5 5 1 2 & & % % % % ^ ^ < < % % 4 4 b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively u u /technical specifications* u / as per gem category speci cation /speci cation u u /specificationname b b s s /bid requirementallowed valuesstandards andcertificationsgoverning standardconformity to is 3312generictypes of shelving cabinetsdimensions are withoutpedestal heightsmall 1150 mm x 760 mm x 430 mm, large 1855mm x 910 mm x 480 mmavailability of drawersyes, noavailability of lockersyes, noadditional specification parameters - steel shelving cabinets adjustable type confirming to is3312 v4 32 pieces specification parameternamebid requirement allowed valuesremarksdetailed specification is included in buyer added bid specific atc. biddersshould submit declaration regarding the compliance of the specification.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; a o ; a /consignees/reporting officer and quantity5. .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1priya p695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, triavndrum3230metal beds v3 64 pieces 5 5 1 2 & & % % % % ^ ^ < < % % 4 4 b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively u u /technical specifications* u / as per gem category speci cation6 / 15 /speci cation u u /specificationname b b s s /bid requirementallowed valuesgenerictype of metal bedmetal bed, metal bed with headboard only, metal bedwith footboard only, metal bed with headboard andfootboard, metal bed with headboard, footboard andcanopysize category of metal bedsingle, double, queen size, king size, super king sizeoverall length of bed inmm1800 - 1850 mm, 1850 - 1900 mm, 1900 - 1950 mm, 1950 - 2000 mmoverall width of bed inmm750 - 900 mm 2.5 to 3 ft, 900 - 1050 mm 3 to 3.5ft, 1050 - 1200 mm 3.5 to 4 ft, 1200 - 1350 mm 4to 4.5 ft, 1350 - 1500 mm 4.5 to 5 ft, 1500 - 1650mm 5 to 5.4 ft, 1650 - 1800 mm 5.4 to 6 ft, 1800 -1950 mm 6 to 6.4 ft, 1950 - 2100 mm 6.4 to 6.9 ftoverall height of bed frominstallation level in mm150 - 200 mm, 200 - 250 mm, 250 - 300 mm, 300 -350 mm, 350 - 400 mm, 400 - 450 mm, 450 - 500mm, 500 - 550 mm, 550 - 600 mmavailability of headboardyes, noavailability of footboardyes, nometal bed framematerial of bed frameincluding legsmild steel, aluminium, wrought ironmetal bedmattress supportpaneltype of bed mattresssupporthorizontal beams only, vertical beams only, crossbeams - horizontal & vertical combomaterial of bed mattresssupport panelmild steel, aluminium, wrought ironmetal bedheadboardmaterial of bed headboardframemild steel, aluminium, wrought iron, nametal bedfootboardmaterial of bed footboardframemild steel, aluminium, wrought iron, naadditional specification parameters - metal beds v3 64 pieces specification parameternamebid requirement allowed valuesremarksdetailed specification is included in buyer added bid specific atc. biddersshould submit declaration regarding the compliance of the specification.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; a o ; a /consignees/reporting officer and quantity7 / 15 . .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1shiju v s695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, trivandrum6430special terms and conditions-version:1 effective from 25-06-2024 for category office chair v31. special terms and conditions1. the colours for the seat and back, are speci ed based on the procurement done by various buyerson gem. 2. sellers are advised to refrain from uploading any catalogue selecting image colour other than theoption chosen for the catalogue, as available in the category. any mismanagement of this will betreated seriously as per gem policies.3. in case buyer requires to buy any other colour not covered in the category, same may be speci edunder additional parameters while creating the bid. the colours mentioned in the additionalparameters by the buyer in the bid shall prevail over the colours indicated in the catalogue.4. sellers are advised to check the complete bid document while offering their prices.5 5 : : d d/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. genericbidder financial standing: the bidder should not be under liquidation, court receivership or similarproceedings, should not be bankrupt. bidder to upload undertaking to this effect with bid.3. genericbidders shall quote only those products part of service delivery in the bid which are not obsolete in themarket and has at least 7 years residual market life i.e. the offered product shall not be declared end-of-life by the oem before this period.4. certificatesbidders offer is liable to be rejected if they dont upload any of the certificates / documents sought in thebid document, atc and corrigendum if any.5. genericbidders are advised to check applicable gst on their own before quoting. buyer will not take any8 / 15 responsibility in this regards. gst reimbursement will be as per actuals or as per applicable rateswhichever is lower, subject to the maximum of quoted gst %.6. buyer added bid specific atcbuyer added text based atc clausesa. bidders are advised to quote prices as per technical specification and additional specification. bidders should not include price bid in the technical bid. the price format to be submitted along with financial bid only. if any of the price components disclosed in the technical bid, the bid will summarily be rejected and thebidder will be disqualified from further bidding process.b. bidders should submit the manufacturers authorization in attached format- a buyer uploaded atc documentc. liquidated damages:if the supplier fails to deliver or install/commission any or all the goods or fails to perform the services within the time frames incorporated in the purchase order, the purchaser shall, without prejudice to other rights and remedies available to the purchaser under the contract, deduct from the contract price, asliquidated damages, a sum equivalent to 0.5% per week of delay or part thereof on delayed supply of goods, installation, commissioning and/or services until actual delivery or performance subject to a maximum of 10 % of the contract price. once the maximum is reached purchaser may consider termination of the contract.if any delay by the supplier is maintained its contractual obligations towards delivery of goods andperformance of services shall render the supplier liable to any or all of the following sanctions:a. imposition of liquidated damages, b. forfeiture of its performance security andc. termination of the contract for defaultd. sctimst reserves the right to ask for a free demonstration of the quoted equipment/ items after giving reasonable time to the bidder at a pre-determined place acceptable to the purchaser or at a site in case of non-portable and heavy equipment for evaluating the technical compatibility as per the bidding documentspeci cations, professionalism and quality of work of the bidder for technically qualifying for opening the price bid. sctimst reserves the right to accept/ reject the bid based on the product/ site evaluation as stated above.1 2 door storage cupboards. indent no: 1 qty 32 supply & installation of 2 door cupboards the storage size should be 900w x 507d x 1950ht +/-1 mm. storage should be completely knock down construction. storage skirting should be removableand to cover integral legs and legs should be fitted with screw type leveller. storage should be made from combination of crca 0.8 mm & 0.6 mm thickness. storage door should be provided with steel hinge door. door lock should be 3-way 90 degree removable key type cam lock &locking mechanism and handle should be base aesthetically appealing, ergonomic, flush with door made from zinc alloy.9 / 15 one locker should be placed in the rh side of the storage with hinge door and 2-way cam lock with knob type handle top side full shelf should be fixed and adjustable half shelves 1 no on rh side of the storage & 2 no s on lh side of vertical partition. one number hanging rod should be provided on left half of partition below top shelf & another one on right half below locker both mounted on snap-ontype plastic brackets. storage nish should be epoxy powder coated to the thickness of 50 microns +/-10. product should be certified by bifma, greenguard, greenpro, aiota, and iaq2 cantilever chair. indent no.3 qty 32 supply &installation of non revolving chair the chair seat should be made of injection moulded in glass lled polypropylene compound which is upholstered with fabric upholstery covers and moulded polyurethane foam. the chair back should be injection moulded in glass lled polypropylene compound which is upholstered with mesh fabric seat size should be: 50 cm. d x48 cm. w back size should be: 53 cm. w x 39 cm. d the foam should be high-resilience polyurethane moulded with density 45+/-2 kg/m and hardness 16+/-2 kgf as per is: 7888 for 25% compression. chair under structure should be cantilever with powder coateddft 50 10 microns welded tubular main frame is made from 2.54 0.03 cm x 0.2 0.016cm and 1.9 0.3mm x 0.12 0.0096 cm with mild steel electric resistance welding tube. the armrest should be made of glass filled polypropylene compound andassembled over the tubular frame the chair shoes should be made of glass lled polypropylene compound with and pressed fitted with tubular frame. felt is provided below the shoes. 10 / 15 3 single bed with head and footboard. indent no.4 qty 64 supply & installation of single size metal bed. the bed size should be 2080w x 925d x 385 ht +/-1 mm. bed should be completely knock down construction with metal frame material. metal frame size should be mild steel pipe 25.4x 50.8 x 1.2 thk, mild steel pipe 19.05x 19.05 x 0.8 thk and angle 20x20x1.6 thk +/-0.1mm. bed should be provided with headboard & footboard bed nish should be epoxy powder coated to the thickness of 50 microns +/-10. product should be certi ed by bifma, green guard, green pro, aiota, and iaq additional terms and conditions1 the bidder participating in the tender should be an oem or an authorized dealer. upload manufacturer authorization: wherever authorized distributors are submitting the bid, manufacturers authorization form maf/certi cate withoem details shall also be uploaded.2 splitting up of bid items is not possible. bidder shall quote for all products mentioned in the bill of quantity. bidders o er is liable to be rejected if theydo not quote for all products mentioned in bill of quantity boq.3 bidder should upload speci cation and catalogues of the quoted products. bidder should provide the available colour options for the o ered chairs, lpsc reserves the right to choose the colours from the available options for the above items and the same will be mentioned in the p.o. 4 service escalation matrix of the bidder should be provided with o ce set up and warehouse details in kerala. registration certi cate also to be submitted as documentary evidence.5 the supplied products should be designed and tested as per bifma standards for comfort, safety, and durability.6 the bidder/oem should have manufacturing facility in india and they shall manufacture in accordance with iso 9001:2015, 14001:2015, 45001:2018 and 500o1:2018follow safety norms in accordance of ohsas7 the bidder/ oem should have green guard, aiota, iaq, green pro and griha certi cation for the o ered furniture which are in accordance with environment requirements and recognized under ministry of new and renewable energy.11 / 15 the bidder / oem themselves or through resellers, should have executed project for supply and installation / commissioning of same or

Central Government/Public Sector

TRN :34844472 | 04 Aug, 2025

Tender Value : 35.69 Lacs

Katihar - Bihar

Tender for provision for the works for compliance of the observation by aviation safety at katihar. sub head- rectification or repair of ht panel, avr and provision of avr cum transformer and its associated works at katihar mssr station

Central Government/Public Sector

TRN :34822728 | 01 Aug, 2025

Tender Value : 0

Panchkula - Haryana

Tender for gem bids for ms round and flat square

Central Government / Public Sector

TRN :34824292 | 30 Jul, 2025

Tender Value : 0

Vijayawada - Andhra Pradesh

Tender for supply of set of hardware items for msu tubes in conventional locos. set consists 05 items 40 nos. in one set. set details given below. 1 hex socket head cap screw m12x1.75x90l, is: 2269 12.9 straight knurling - 16 nos./set 2 hex socket head cap screw m12x1.75x70l, is: 2269 12.9 straight knurling - 02 nos./set 3 hex socket head cap screw m10x30l, is: 2269 12.9 straight knurling - 06 nos./set 4 nut m12 pitch 1.75, grade-10, is: 1364 part-iii 2002 - 08 nos./set 5 spring washer m12, is: 3063 - 08 nos./set..

Central Government/Public Sector

TRN :34825030 | 14 Aug, 2025

Tender Value : 0

Kolkata - West Bengal

Tender for e- tender 2nd call notice inviting for procurement of the signage items for the forms and stationery store of ipgmer-sskm hospital wbhf/sskm/msvp/7340/2025/ sun board with vinyl printing

Related Sub Industries : Stainless Steel

List of m-s-product Tenders

Tender for supply of set of ms shim for wap7 locomotive, set consisting of 05 items.

Tender for procurement of various sizes of ms flanges on rate contract basis for two years period through against open enquiry.

Tender for provision for the works for compliance of the observation by aviation safety at katihar. sub head- rectification or repair of ht panel, avr and provision of avr cum transformer and its associated works at katihar mssr station

Tender for gem bids for ms round and flat square

Tender for e- tender 2nd call notice inviting for procurement of the signage items for the forms and stationery store of ipgmer-sskm hospital wbhf/sskm/msvp/7340/2025/ sun board with vinyl printing

Get M S Product Tender Alert...

Related Sub Industries : Stainless Steel

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us