Filters

List of zinc-anode-scrap Tenders

List of latest zinc-anode-scrap Tenders in Indian Tenders. Click on any zinc-anode-scrap Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for zinc-anode-scrap Tenders.

All-Tenders (59)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :49023530 | 01 Jan, 0001

Tender Value : 0

Ajmer - Rajasthan

Tender for supply of calcium cap. containing elemental calcium 150mg , calcitriol (vitamin d) and zinc.calcium cap. containing elemental calcium 150mg , calcitriol (vitamin d) and zinc.,calcium cap. containing elemental calcium 150mg , calcitriol (vitamin d) and zinc. ] ajmer divisional hospital, rajasthan 250000.00 numbers nwr => limited

State Government

TRN :49023607 | 16 May, 2025

Tender Value : 22.62 Lacs

Lucknow - Uttar Pradesh

Tender for tender for construction and renovation work of community center located in sector-d of kanpur road scheme - rcc repairs 2 chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of engineer-in-charge. 3 75mm average thickness 4 50mm average thickness 5 25 mm average thickness 6 cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of engineer-in-charge. 7 bars upto 12 mm diameter 8 bars above 12 mm diameter 9 drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in rcc beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of engineer-in-charge.upto and including 12mm dia. 10 providing, mixing and applying bonding coat of approved adhesive on chipped portion of rcc as per specifications and direction of engineer-in-charge complete in all respect.epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make 11 providing, mixing and applying sbr polymer (of approved make) modified cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of engineer-in-charge.note: measurement and payment: the pre-measurement of thickness shall be done just after the surface preparation is completed and payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 n/sqmm2). 12 25 mm average thickness in 2 layers. 13 50 mm average thickness in 3 layers. 14 providing and laying sbr polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concrete jacket for the structuralmembers e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness all-round existing core of rcc member.note: rates shall be for finished surface area of concrete and shall include the cost of making holes in existing rcc slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved super-plasticiser forrendering concrete as flowable self compacting and sbr polymer but shall exclude cost of reinforcement, bond coat, shear keys, centering and shuttering, strutting, propping etc (payment under this item shall be madeonly after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument) 15 50mm thick in grade m 25 with cement content not less than 330 kg per cum 16 75mm thick in grade m 25 with cement content not less than 330 kg per cum 17 100mm thick in grade m 25 with cement content not less than 330 kg per cum 18 providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of engineer-in-charge.(the payment shall be made on the basis of actual weight of approved grout injected.) 19 epoxy injection grout in concrete/rcc work of approved make 20 providing, erecting, maintaining and removing temporary protective screens made out of specified fabric with all necessary fixing arrangement to ensure that it remains in position for the work duration as required by the engineerin- charge.wooven pvc cloth 21 shotcreting r.c.c. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stoneaggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by engineer- in-chargenote: rates shall include the providing necessary ground wires etc. the levelling gauges, if used, shall be paid for separately. payment under this item shall be made only after proper wet curing has been done and surface hasbeen satisfactorily evaluated by sounding/tapping with a blunt metal instrument. 22 50mm thick in grade m 25 with cement content not less than 330 kg per cum 23 75mm thick in grade m 25 with cement content not less than 330 kg per cum 24 providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20mm to 30mm) up to depth from 30mm to 80mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of engineer-in-charge. 25 providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of l shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by engineer-in-charge. 26 mild steel or iron work in plain work such as in r.c.c. or r.b. (when not included in an over all rates ) including bending for proper completion of the workand including supply of steel and its wastage , bends, hooks and authorised overlaps shall be measured up to floor two level. 27 centering and shuttering including strutting, propping etc. and removal of form for : lintels, beams, plinth beams, girders, bressumers and cantilevers 28 centering and shuttering including strutting, propping etc. and removal of form for : columns, pillars, piers, abutments, posts and struts 29 centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thic 30 waterproofing and terracing 31 providing and laying in situ five course water proofing treatment with app (atactic polypropylene) modified polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to is : 702, 3rd layer of roofing membrane app modified polymeric membrane 2.0 mm thick of 3.00 kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron hmhdpe film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron hmhdpe film. 5th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). 32 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate 33 miscellaneous works 34 providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, includingadditional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in-charge.note:- (1) the elevational area of the scaffolding shall be measured for payment purpose. (2) the payment will be made once only for execution of all items for such works. 35 disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge. 36 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : cement mortar 1:6 (1 cement : 6 coarse sand) 37 cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge.the cleaning shall consist following operations:-(i) tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.(ii) entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.(iii) chlorination of rcc internal surface by liquid chlorine.(iv) the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.(v) finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. 38 door-window repair 39 renewing glass panes, with putty and nails wherever necessary including racking out the old putty: float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) 40 renewal of old putty of glass panes (length) 41 demolishing r.c.c. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead asper direction of engineer - in- charge. 42 extra for cutting reinforcement bars manually/ by mechanical means in r.c.c. or r.b. work (payment shall be made on the cross sectional area of r.c.c. or r.b. work) as per direction of engineer-in-charge. 43 demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. in cement mortar 44 dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :of area beyond 3 sq. metres 45 casement door double panel with french (false) mullion with zinc alloy (zamak) 3d hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides.using r4 series with frame (64 mm & above) x (55 mm & above) & sash (64 mm & above ) x (100 mm& above) & french (false ) mullion (64mm & above) x (60 mm & above). (height above 2.5 metre) 46 toughened glass 12 mm thickness 47 finishing work 48 dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 49 20 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) 50 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 51 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete. 52 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: new work (two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 53 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : new work (two or more coats) over and including water thinnable priming coat with cement primer 54 applying priming coat:with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 55 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :one or more coats on old work 56 washrooms 57 dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm 58 providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 59 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including isi marked stainless steel butt hinges with necessary screws 60 providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm 61 providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm 62 providing and fixing aluminium sliding door bolts isi marked anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

Central Government/Public Sector

TRN :49026130 | 01 Jan, 0001

Tender Value : 0

Liluah - West Bengal

Tender for supply of procurement of brazing alloy rod, size : 2 mm dia. as per is : 2927/1975 (re- affirmed 2019) having silver : 42-44%, cu : 36-38%, zinc : 10.5 - 20%, grade : ba-cu-ag-16.procurement of brazing alloy rod, size : 2 mm dia. as per is : 2927/1975 (re- affirmed 2019) having silver : 42-44%, cu : 36-38%, zinc : 10.5 - 20%, grade : ba-cu-ag-16.,brazing alloy rod, size : 2 mm dia. as per is : 2927/1975 (re- affirmed 2019) having sil ver : 42-44%, cu : 36-38%, zinc : 10.5 - 20%, grade : ba-cu-ag-16. [ warranty period: 30 months af ter the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ] ] dy.cmm/jamalpur, er bihar 5.72 kg

State Government

TRN :49028026 | 01 Jan, 0001

Tender Value : 0

Cooch Behar - West Bengal

Tender for tender for procurement rate contract of disodium octaborate tetrahydrate (boron 20%), zinc-edta (zn-12%), lime (cacoy) for agriculture use. bispyribac sodium 10% sc & other critical inputs to the o/o the asst. director of agriculture of twelve blocks of cooch behar district.

Central Government/Public Sector

TRN :49029317 | 01 Jan, 0001

Tender Value : 0

Asansol - West Bengal

Tender for auction sale of sc. cut of parts of cond. coach, type-wgaccn [rcf], 1] er 042106 ab. condition- a] to be sold along with electrical fittings but without mechanical excluded fittings as available [list of mechanical items of each coach, 1] wheel sets with rb and axle box, 2] bogie, 3] helical springs of sorts, 4] distributor valve, 5] common pipe bracket, 6] control reservoir, 7] brake cylinder [bmbc], 8] buffer plunger, 9] wearing piece [bronze], 10] aluminium/zinc water tank. b] cutting allowed, c] purchaser should comply the special condition for dismantling of wagons-coaches as per annexure to noc sl. no. 11652 issued by wbpcb. please check special condition and detailed conditions/ amendments/ modification if any in depot condition before bidding.

Central Government/Public Sector

TRN :49029319 | 01 Jan, 0001

Tender Value : 0

Asansol - West Bengal

Tender for auction sale of sc. cut of parts of cond. coach, type-gs [rcf], 1] er 98521 ab. condition- a] sold along with electrical fittings but without mechanical excluded fittings as available, [list of mechanical items of each coach - 1] wheel sets with rb and axle box, 2] bogie, 3] helical springs of sorts, 4] distributor valve, 5] common pipe bracket, 6] control reservoir, 7] brake cylinder [bmbc], 8] buffer plunger, 9] wearing piece [bronze], 10] aluminium/zinc water tank. b] cutting allowed, c] purchaser should comply the special condition for dismantling of wagons-coaches as per annexure to noc sl. no. 11652 issued by wbpcb. please check special condition and detailed conditions / amendments / modifications if any in depot condition before bidding.

Central Government/Public Sector

TRN :34438741 | 16 May, 2025

Tender Value : 0

Panchkula - Haryana

Tender for gem bids for 5 amino salicylic acid 400 mg tab , abiraterone acetate 500 mg tab , acalabrutinib 100 mg cap , acarbose 25 mg tab , acetylcysteine 600 mg plus acebrophyline 100mg , acebrophyllin 200 mg plus fexofenadine 120 mg plus montelukast 10 mg tab , acebrophylline 100mg cap , acebrophylline 200mg sr tab , aceclofenac 100mg plus paracetomol 325 mg plus chloroxazone 250 mg tab hifenac mr , aceclofenac 100 mg plus paracetamol 325 mg plus serratiopeptidase 15 mg tab , aceclofenac 100 mg plus thiocolchicoside 4 mg tab , aceclofenac 100 mg tab , aceclofenac sr 200mg tab , acenocoumarol 4 mg tab , acenocoumarol 2 mg tab , acenocoumarol 1 mg tab , acetaminophen 325 mg plus tramadol 37 point 5 mg ultracet tab , acetazolamide 0 point 25 g tab , acitretin 25mg tab , acotiamide 100mg tab , acyclovir 200 mg tab , acyclovir 400 mg tab , acyclovir 5 percent oint , adapt paste , alendronate sodium 70 mg tab , alfuzosin plus dutasteride 0 point 5 mg tab , alfuzosin 10 mg tab , allopurinol 300 mg tab , alpha keto analogue of aminoacids tab , alpha lipoic acid plus chromium plus folic acid methylcobalamin plus selenium plus zinc , alprazolam 0 point 25 mg tab , alprazolam 0 point 5 mg tab , amantadine 100 mg cap , ambrisentan 5mg tab , ambroxol 30 mg tab , amiodarone hcl 100 mg tab , amisulpride 100mg tab , amisulpride 200 mg tab , amisulpride 50 mg tab , amitriptyline 10mg tab , amitriptyline 50 mg tab , amitriptyline 25 mg tab , amlodipine 10 mg tab , tab amlodipine 2 point 5mg , amlodipine 5 mg plus metoprolol 25 mg tab , amlodipine 5 mg plus metoprolol 50 mg tab , amorolfine 5 percent nail lacquer , amorolfine 0 point 25 percent tube of 10 gm

Central Government/Public Sector

TRN :34438746 | 17 May, 2025

Tender Value : 0

Panchkula - Haryana

Tender for gem bids for buprenorphine patch 20 mcg , cabergoline 0 point 25mg tab , cabozantinib 20 mg tab , calamine lotion bott of 100 ml , calcium acetate 500 mg tab , calcium carbonate plus calcitirol plus methylcobalamin plus vitamin k2 and zinc tab , calcium citrate malate and vitamin d3 tab , canagliflozin 100mg tab , inosine monophosphate 500mg plus l arginine 250 mg plus l carnosine 50 mg cap , silodosin 8 mg plus dutasteride 0 point 5 mg tab , carbamazepine 100mg tab , carbamazepine 200 mg cr cap , carbamazepine 200 mg tab , carbamazepine 400 mg cr tab , carbamazepine 300 mg cr tab , levodopa 100 mg plus carbidopa 10 mg cr tab , levodopa 100 mg plus carbidopa 25 mg cr tab , carbimazole20mg , carbimazole 5 mg tab , carnitine 200 mg tab , carvedilol 10 mg tab , carvedilol 12 point 5 mg tab , carvedilol 6 point 25 mg tab , cefixime 200 mg plus clavulanate 125 mg tab , cefpodoxime 200mg plus clavulaniv acid 125mg tab , cefuroxime 250 mg tab , cefuroxime 500 mg plus clavuclonic acid 125 mg tab , tab cerebroprotein hdrolysate 90 mg , common cold tab antihistiminics plus paracetamol 500 mg without pseudoephedrine , chlordiazepoxide 10mg tab , clinidium bromide 2 point 5mg plus chlordiazeproxide 5 mg tab , chlorohexidine mouth wash 0 point 2 percent bottl of 100 ml , chlorthalidone 12 point 5mg tab , chlorzoxazone 500 mg plus diclofenac sodium 50 mg plus paracetamol 325 mg tab , choline salicylate 8 point 7 percent plus lidocaine 2 percent , cilnidipine 10 mg plus metoprolol 50 mg tab , cilnidipine 10 mg plus telmisartan 40 mg tab , cilnidipine 10 mg tab , cilnidipine 20 mg tab , cilnidipine 5 mg tab , cilostazol 100 mg tab

Central Government/Public Sector

TRN :34438914 | 17 May, 2025

Tender Value : 0

Dimapur - Nagaland

Tender for gem bids for lignocaine hcl jelly 2 percent tube of 30 gm with sterile tube and short nozzle suitable for intra urethral use should be packed within a sterile blister pack , inj midazolam 5 mg ml , doxophyllin 400 mg tab , fentanyl 25 mcg transdermal , inj ondansetran , tab ticargrelor 90mg , tab metoprolol xl 25 mg , asprin 75 mg tab , tab telmisartan 40 mg , tab telmesartan 40 mg plus hydrochlorthiazide 12 point 5 mg , ketoconazole 2 percent plus zinc pyrithione 1 percent bottle of 60 ml , lotion minoxidil 5 percent , urea cream urea 10 to 12 percent lactic acid 5 to 10 percent in pack of 50 gm , sacubitril 49 mg plus valsartan 51 mg tab , inj pantoprazole , oint anti haemorhoidal containing betamethasone 0 point 05 percent phenylephrine 0 point 1 percent and lignocaine 2 point 5 percent tube of 15 gm , mifepristone 200 mg tab , tab thyroxine sodium 25 mcg , tab thyroxine sodium 100 mcg , inj atracurium 10 mg ml , tab sodium bicarbonate 500 mg. , eye drops ciprofloxacin 0point 3 percent of 3mgml bott of 5 ml , carboxy methyl cellulose 1 percent eye drop bott of 10 ml , dorzolamide eye drop 2 percent , sodium chloride 0 point 65 percent w v nasal drops of 15 ml , escitalopram 10 mg tab , tab nortriptyline 25 mg , tab promethazine 25 mg , n-acetyl cysteine 600 mg tab , etophylline 115 mg and theophylline 35 mg in slow release form tab , tab micronized purified flavonoid fraction of rutaceae 500mg , vit d 3 60000 iu per 1gm sachet , respules budecort 0 point 5 mg , tab hydroxychloroquine 200 mg , tab etoricoxib 90mg , tenofovir 300 mg plus lamivudine 300 mg plus efavirenz 600 mg , tab zidovudine plus lamivudine , tab lopinavir 100 mg plus ritanovir 25 mg , tofacitinib 5 mg tab

Central Government / Public Sector

TRN :34432318 | 15 May, 2025

Tender Value : 0

Hyderabad - Telangana

Tender for gem bids for 1650 hard brass wire 0.25 mm uncoated hard brass wire 0.25 mm zinc coated hard brass wire 0.20 mm uncoated hard brass wire 0.20 mm zinc coated

Related Searched Keywords : zinc anode scrap

List of zinc-anode-scrap Tenders

Tender for tender for procurement rate contract of disodium octaborate tetrahydrate (boron 20%), zinc-edta (zn-12%), lime (cacoy) for agriculture use. bispyribac sodium 10% sc & other critical inputs to the o/o the asst. director of agriculture of twelve blocks of cooch behar district.

Tender for gem bids for 1650 hard brass wire 0.25 mm uncoated hard brass wire 0.25 mm zinc coated hard brass wire 0.20 mm uncoated hard brass wire 0.20 mm zinc coated

Get zinc anode scrap Tender Alert...

Related Searched Keywords : zinc anode scrap

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us