Filters

List of xlpe-conductor Tenders

List of latest xlpe-conductor Tenders in Indian Tenders. Click on any xlpe-conductor Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for xlpe-conductor Tenders.

All-Tenders (25)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35761557 | 11 Nov, 2025

Tender Value : 75.00 Lacs

Kasargode - Kerala

Tender for the supply of 110kv 100sqmm aaac al-7 xlpe insulated covered conductor for the work of extending ers -bypass arrangement in connection with the upgradation of existing mylatty vidyanagar sc line to 220/110kv mcmv line

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

Central Government/Public Sector

TRN :35756616 | 10 Nov, 2025

Tender Value : 0

Dimapur - Nagaland

Tender for gem bids for led tube light retrofit type q2, led luminaire for roadand street lights v2 conforming to is 10322 part 5 /section 3 q3, led luminaire for floodlight v2conforming to is 10322 part 5/section 5 q3, selfballasted led lamps for general lighting services v2conforming to is 16102 q2, mcb - miniature circuit -breakers for a.c. operation as per is / iec 60898 part 1q2, molded case circuit breakers mccb as per is / iec60947 q3, xlpe cable for working voltages up to andincluding 1.1 kv as per is 7098 part 1 q2, pvc coppercable single core and multi core circular sheathed cordwith flexible conductor v2 as per is 694 q2, pvcinsulated copper cable single and multi - core circularsheathed cable with flexible conductor v2 as per is 694q2, piano type non modular domestic fan regulator asper is 11037 q3, elecric bells and accessories as per is2268 q3, piano type non modular electrical switch socketcombination as per is 3854 and is 1293 q3, modularpiano type domestic electrical switches as per is 3854 q3, piano type modular domestic electrical sockets - is 1293q3 % % % % 3 3 0 0 /

State Government

TRN :35757193 | 06 Nov, 2025

Tender Value : 21.50 Lacs

Dibrugarh - Assam

Tender for construction of 11kv spur line with aaac covered conductor and xlpe cable and augmentation of 2nos of existing 100kva ss to 100kva 500kva ss in respect of ms marwari arogya bhawan co mr ranjan lohia arogya bhawan road jyoti nagar

Central Government/Public Sector

TRN :35761036 | 20 Nov, 2025

Tender Value : 0

Mumbai - Maharashtra

Tender for gem bids for cxlpe cable for working voltages up to and including 1.1 kv as per is 7098 (part 1), pvc insulated copper cable single and multi - core circular sheathed cable with flexible conductor (v2) as per is 694, pvc copper cable single core and multi core circular sheathed cable with rigid conductor (v2) as per is 694, pvc copper cable single core and multi core circular sheathed cord with flexible conductor (v2) as per is 694, xlpe cables, category c2 - fr - lsh, for working voltages from 3.3 kv up to and including 33 kv as per is 7098 (part 2), pvc flat cable, copper conductor with pvc insulation and sheath as per is 694, pvc insulated cables, unsheathed with rigid conductor (v2) as per is 694, power cable for direct burial xlpe ugac cable for dmrc, pvc aluminium cable 1 core and multi core circular sheathed cable with rigid conductor as per is 694, control cable

Central Government And Public Sector

TRN :35744174 | 12 Nov, 2025

Tender Value : 25.85 Lacs

New Delhi - Delhi

Tender for gem bids for replacement, bid number gem2025b6836170 dated 29-10-2025 bid document1 24 1 1 sitc of chilled water double skin type horizontal vertical airhandling units, supplying and fixing 200mm dia chilledwater piping, supplying and fixing 150mm dia chilled waterpiping, supplying and fixing 100mm dia chilled water piping, supplying and fixing 80mm dia chilled water piping, supplying and fixing 65mm dia chilled water piping, supplying and fixing 200mm dia butterfly valve, supplyingand fixing 100mm dia butterfly valve, supplying and fixing80mm dia butterfly valve, supplying and fixing 65mm diabutterfly valve, supplying and fixing 65mm dia balancingvalve, supplying and fixing 80mm dia y strainer, providingand fixing the industrial type pressure gauge, providing andfixing the mercury in glass industrial type thermometer, providing and fixing the air vent for automatic purging, sitc of zero point63 mm thickness sheet site fabricatedgss sheet metal ducting, sitc of zero point80 mmthickness sheet site fabricated gss sheet metal ducting, sitc of 1 mm thickness sheet site fabricated gss sheetmetal ducting, sitc of 1 point 25 mm thickness sheet sitefabricated gss sheet metal ducting, supply and fixing ofacoustic lining of supply air duct and plenum, providing andfixing 40 mm dia nominal bore gi pipe, sitc of 4c x 4sqmm 1 point 1kv grade xlpe insulated armoured coppercable, supplying and making end termination for 4c x 4sqmm size of xlpe copper conductor cable, sitc of 3c x 1point 5 sqmm armoured copper communication cable, providing and fixing 6 swg dia gi wire for loop earthing, dismantling of existing ahus of different capacities, dismantalling of existing 200mm dia piping valves of ahusand shifting the piping to the store, dismantalling ofexisting 150mm dia piping valves of ahus and shifting thepiping to the store, dismantalling of existing 100mm diapiping valves of ahus and shifting the piping to the store, dismantalling of existing 80mm dia piping valves of ahusand shifting the piping to the store, dismantalling ofexisting 65mm dia piping valves of ahus and shifting thepiping to the store, sitc of 500 ltr capacity of pvc tank formake up water with insulation, supplying fabricating andfixing of 40mmx40mmx5 mm ms angle iron ms frame, supplying fabricating and fixing of 40mmx5mm ms flat msframe

Central Government/Public Sector

TRN :35745098 | 10 Nov, 2025

Tender Value : 0

Lucknow - Uttar Pradesh

Tender for gem bids for self ballasted led lamps for general lighting services v2conforming to is 16102 q2, led luminaire for road andstreet lights v2 conforming to is 10322 part 5 / section3 q3, led luminaire for floodlight v2 conforming to is10322 part 5/section 5 q3, pvc copper cable singlecore and multi core circular sheathed cord with flexibleconductor v2 as per is 694 q2, pvc insulated coppercable single and multi - core circular sheathed cable withflexible conductor v2 as per is 694 q2, led batten q2, led bulkhead light q3, molded case circuit breakersmccb as per is / iec 60947 q3, led tube light retrofittype q2, xlpe cable for working voltages up to andincluding 1.1 kv as per is 7098 part 1 q2

State Government

TRN :35753077 | 11 Nov, 2025

Tender Value : 0

Hisar - Haryana

Tender for supply erection of 150 mm2 x 3 core 11 kv xlpe cable to shift existing conductor line crossing over the boundary wall of house no. 40p, sector 14, hisar and all other works contingent thereto including one year mtc. defect liability period, free

Central Government/Public Sector

TRN :35723825 | 07 Nov, 2025

Tender Value : 0

Chandigarh Ut - Chandigarh

Tender for gem bids for led luminaire for road and street lights v2 conformingto is 10322 part 5 section 3 q3 led garden light v2q2 led batten q2 xlpe cable for working voltages upto and including 11 kv as per is 7098 part 1 q2 ledtube light retrofit type q2 led luminaire forfloodlight v2 conforming to is 10322 part 5section 5q3 led bulkhead light q3 self ballasted led lampsfor general lighting services v2 conforming to is 16102q2 molded case circuit breakers mccb as per is iec60947 q3 mcb - miniature circuit - breakers for acoperation as per is iec 60898 part 1 q2 piano typemodular domestic fan regulator as per is 11037 q3 piano type modular domestic electrical sockets - is 1293q3 pvc copper cable single core and multi core circularsheathed cord with flexible conductor v2 as per is 694q2 modular piano type domestic electrical switches asper is 3854 q3 elecric bells and accessories as per is2268 q3 mcb disturbuisation box tp 12 way ledinverator batten 25 watt led inverator batten 30 watt pvc copper cable flexible 6 sq mm single core led streetlight 90 watt inverter di mmable ir sensor pvc coppercable flexiable 2 point 5 sq mm x 3 core led ceiling fitting2 inch x 2 inch recess mounting 36 watt pvc copper cableflexiable single core 10 sq mm aluminum cable pvcinsulated twin core 16 sq mm pvc copper cable flexiablesingle core 4 sq mm sluice valve pn 1 point 6 size 250 mm cable pvc flexible copper conductor 2 point 5 sqmm singlecore nrv 150 mm cable flat aluminum conductor 2 core10 sq mm gun metal gate valves size 15 mm ledfountain light coloured 6 watt pvc connection pipe 15 x450 mm long with brass heating element for geyser 2000watt mcb tpn 32 amp b curve pvc connection pipe 15 x600 mm bleaching powder heating element for geyser bid number gem2025b6810121 dated 28-10-2025 bid document1 121 1 1 1500 watt, mcb distribuation box 8 way, sluice valve pn 1point 6 size 100 mm, modular socket 20 amp, ball valve 40mm brass, switch change over switch 4 pole 100 amp, ballvalve 50 mm brasss, high strengh calcium based chlorinegranules chorination chemical 25 kg bags, sluice valve pn1 point 6 size 150 mm, ball valve 25 mm brass, pvc tape20 mm x 25 mtr a, led inverter street light 60 watt, isolator 63 amp tpn, gun metal gate valves size 20 mm, multicore wire pvc copper of size 2 point 5 sq mm, ballvalve 63 mm brass, ball valve brass of size 20 mm, frameplate 6 module, modular socket 6 amp, modular fanregulator switch type, condenser 2 point 5 mfd, gi union50 mm, sluice valve pn 1 point 6 size 80 mm, isolater 63amp with encloser, rccb 2 pole 63 amp 300 ma, pvc flatcable aluminum 6 sqmm twin core 100 mtr, mcb spn 40amp b curve, switch board boxes 6 modular, thimblecopper of size 150 sqmm, isolator 40 amp tp, modularswitch 20 amp one way, switch 6 amp one way, gi union40 mm, fan pvc ventilator 10 inch sweep, gi nipple 40 x150 mm long, gi socket 50 mm, capacitor 3 point mfd, pvc gang box 6 amp, gi tee 50 mm, gi nipple mediumgrade 40 mm dia, frame plate 8 module, frame plate 3module, thermostat switch for geyser, gi tee 40 mm, gielbow 50 mm, gi socket 80 mm, capacitor 4.0 mfd, ceilling rose, gun metal gate valves size 25 mm, gi nipplemedium grade 50 mm dia x 150 mm, gi elbow 80 mm, frame plate with matching cover plate 2 modular, plugmetal clad 20 amp, frame plate 4 module, gi elbow 40 mm, gi nipple 40 x 100 mm, gi elbow 20 mm, gi socket 40mm, gi nipple 40 x 50 mm long, bulb 100 wattincandesent, pvc gang box 5 amp, gi elbow 25 mm, blanking plate, thimble aluminium size 35 sqmm pack of50, thimble aluminium size 70 sqmm pack of 50, thimblealuminium size 95 sqmm pack of 50, thimble aluminiumsize 120 sqmm pack of 50, thimble aluminium size 185sqmm pack of 50, gi plug 15 mm, gi plug 20 mm, gi plug25 mm, gi plug 40 mm, gi plug 50 mm //bid details2 / 121

Central Government And Public Sector

TRN :35725984 | 10 Nov, 2025

Tender Value : 4.94 Lacs

Thrissur - Kerala

Tender for gem bids for supplying and fixing of vertical type, mcb distribution board, supplying and fixing 5 a to 32 a rating, mcb single pole, supplying and fixing 5 a to 32 a rating, mcb tripple pole, supplying and fixing 4 pole 63 amps isolator, supplying andfixing of pvc conduit 20 mm, supplying and fixing of pvcconduit 25 mm, supplying and drawing of frls coppercable 3x1.5 sq. mm, supplying and drawing of frls coppercable 3x2.5 sq. mm, supplying and drawing of frls coppercable 3x4 sq. mm, supplying and drawing of frls coppercable 3x 6 sq. mm, supplying and making end terminationwith brass compression gland 3 .5 x 25 sq. mm, supplyingand making end termination with brass compression gland3.5 x 35 sq. mm, supplying and making end terminationwith brass compression gland 3.5 x 50 sq. mm, providingand fixing 6 swg dia g.l. wire, wiring for light point, fanpoint, exhaust fan point, call bell point with 1.5 sq.mmcopper conductor cable group c, supplying and fixingmodular switch socket 5, 6 a switch, supplying and fixingmodular switch socket 3 pin 5, 6 a socket outlet, supplyingand fixing modular switch, socket 15, 16 a switch, supplying and fixing modular switch socket 6 pin 15, 16 asocket outlet, supplying and fixing modules, gl box 3module 100mmx75mm, supplying and making endtermination with brass compression gland 2 x 1.5 sq. mm, dismantling of pvc insulated and pvc sheathed xlpe powercable up to 6 sq. mm, dismantling pvc insulated and pvcsheathed xlpe power cable above 6 sqmm up to 35 sq. mm, dismantling of pvc insulated and pvc sheathed xlpepower cable above 35 sq. mm and up to 95 sq. mm, relaying and refixing of pvc insulated and pvc sheathedxlpe power cable up to 6 sq. mm, relaying and refixing ofpvc insulated and pvc sheathed xlpe power cable above 6sqmm up to 35 sq. mm, relaying and refixing of pvc /bid number: gem/2025/b/6827905* /dated: 27-10-2025 & & / bid document1 / 47 insulated and pvc sheathed xlpe power cable above 35 sq.mm and up to 95 sq. mm, supply and fixing of pedestalmounting type kseb energy meter board, supplying anddrawing 25 sqmm abc aluminium weather proof cable, dismantling 125 amps capacity 4 pole on load change overswitch with ms enclosure, dismantling the existing afdpanel repeater panels, dismantling the existing old125amps capacity lt panel, dismantling the existing scmeter panel, dismantling the existing tpn mcb db, dismantling smoke detectors or mcp or hooter ri etc withaccessories, dismantling the existing life expired unservceable ac stabilser panel, reinstalling the existing 125a, 4 pole on load change over switch, reinstalling theexisting afd panel, reinstalling the existing kseb serviceconnection meter panel, reinstalling the existing tpn mcbdb, dismantling electrical wiring in metal pvc conduits forac units, wirings, dismantling electrical wiring in metal pvcconduits for ei light power plugs, relaying existingelectrical wiring in metal pvc conduits, transportation ofthe dismantled electrical installation accessories within15km distance, rearranging isolating the existingterminations, supply and fixing 63 amps capacity 4 wayconnector, supply installation, testing and commissioningof pre-wired, bulk head light fitting, supplying and fixing of63 amps capacity 4 pole on load change over switch, supply and fixing 2 inch dia rigid pvc pipe, supply andfixing suitable pvc coated gi stay wire, providing framework with 40 mm x 40 mm x 5 mm ms angle iron, providingframe work with 25 x 25 x 3 mm thick ms angle iron, providing frame work with 40 mm x 5 mm ms flat iron, providing frame work with 1 mm thick coated trafford gisheet, supply and fixing 63 amps 4 pole onload changeover switch

Related Searched Keywords : xlpe conductor

List of xlpe-conductor Tenders

Tender for the supply of 110kv 100sqmm aaac al-7 xlpe insulated covered conductor for the work of extending ers -bypass arrangement in connection with the upgradation of existing mylatty vidyanagar sc line to 220/110kv mcmv line

Tender for construction of 11kv spur line with aaac covered conductor and xlpe cable and augmentation of 2nos of existing 100kva ss to 100kva 500kva ss in respect of ms marwari arogya bhawan co mr ranjan lohia arogya bhawan road jyoti nagar

Tender for supply erection of 150 mm2 x 3 core 11 kv xlpe cable to shift existing conductor line crossing over the boundary wall of house no. 40p, sector 14, hisar and all other works contingent thereto including one year mtc. defect liability period, free

Get xlpe conductor Tender Alert...

Related Searched Keywords : xlpe conductor

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us