Filters

List of waste-pit Tenders

List of latest waste-pit Tenders in Indian Tenders. Click on any waste-pit Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for waste-pit Tenders.

All-Tenders (7)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Co-operative

TRN :49022717 | 20 May, 2025

Tender Value : 0

Powayan - Uttar Pradesh

Tender for supply of hardware and general material and nut bolt items supply of hardware and general material and nut bolt items for season 2025-26 , description , norton make sander disk alkon gold plus. grit no. 80 size 100mm. , -do- 36 no. size 100mm , holdite in perfect liquid in ½ kg. tin. , white lead sakura make. , lead wire size 1mm in 500 gm roll. , emery cloths rough carbandom make. , carbandom make emery cloth medium. , -do- fine. , emery tape rough in 50 mtr. long size 2” carbondam make. , -do- fine , carbandom make emery paste in 400 gm rough. , -do- medium , -do – fine , annabond 112 (50 gms.) , annabond 666 (100gms). , araldite in 180 gms. , araldite in 1.8 kgs. , blue tube in 20ml. , loctite no. 270 in 50ml. , -do- no. 262 in 50ml. , rustoline in ½ ltr. tin. , teflon tape size ½” , -do- ¾” , -do- 1” , m.seal phata phat in 25gms. , graphite powder in ½ kg. tin. , braso in 100ml. , rubber hose pipe size 1” suitable for 10 kg./cm2 pressure and temperature 100 degree. , unique make complete rubber tyre coupling size px/tc/ph. , unique make spare tyresize px/tc/phdiscount. , rope pulley one groove , rope pulley two groove. , rope pulley three groove. , d-cycle cap. 2 ton. , -do- 5 ton. , -do- 10 ton. , cotton waste coloured. , garware make p.p. rope size 18mm (3/4”) with tc. , jyoti make pure rubber sheet size 1/8 , -do- size ¼ and above. , bearing sleeve jmc make different size , polyster wire sealing size 1 ton x 2 mtr. long. , -do- size 2 ton x 3 mtr. long. , -do- size 5 ton x 2 mtr. long. , indef make chain pulley block one ton capacity with 10 mtr. lift p-model with tc. , -do- 3 ton capacity with 10 mtr. lift. , rubber oil seal mykoda make different size , c.i.plumber block s.m.r make different size , tefflon rod size 50mm x 300mm. , brass shim 0.05x14”x48”. , brass shim size 0.1x14”x48” , -do- smoke grey. , -do- light grey. , -do- sky blue. , namda different size. , diamond make wire braided rubber hose pipe both side bsp fitting size ¼” x 800mm , -do- size ½” x1500mm. , audco make cock valve (plug valve) flanged end size 3” (80mm) regular pattern standard type wrench operated. , spring steel flat differentsize. , ms round different size. , en-8 rod different size. , ci pulley b-section groove no.3 size 4” dia. , -do- c-section groove no. 4 size 8” dia. , brass liner 40mesh x 2 ft. x 13.125 sft. , rubber hose pipe size ¾” for 100o temperature and working pressure 10kg/cm2 , ms perforated sheet hole size 5mm dia size width 900mm x length 2400mm x 3mm thick. , renold chain different size diamond make. , ms. square different size. , oil paper. , ms chain size 5mm , hydrolic connector size 3/8”x1/4” , -do- size 3/8”x3/8” , -do- size ¼”x1/4” , hose clamp suitable size 1”id pipe. , glass lubricator cap. ½ ltr. no.8 connection size ½” bsp. , brass shim 0.05mmx 14”x48” , -do- 0.10mm x 14”x48” , -do- 0.15mmx14”x48” , -do- 0.20mm x 14”x48” , gm solid rod different size. , brass rod different size , sight glass toughened size 210x15mm , hydrolic connector size ½”x14mm , burffi cut zali size 25mm (1”)x4ft. width x 10 gauge x51 ft. long. , glass wool , chcken wire netting 3ft. x 100 ft. , gi binding wire. , silicon bronze rod 1/8”. , double wire braidedsteam hose pipe size ¾” for pressure 21 kg. cm2 and temperature 205oc. , hindustan composite ltd. make brake liner size ¼”x3”. , loctite in 20ml no. 406 , m-seal pidite make , c.i. v belt pulley section c groove no. 4 dia size 7” , -do- section b groove no. 3 dia size 6”. , gun metal valve sant make , totem make die nut bsf size 3/8” , -do- size ½” , -do- size 5/8” , -do- size ¾” , power master tube exponder 42mm id x 45mm od. , copper rod size 1 ½” , cast steel steam valve wj make different size , copper tube pvc coating size ¼” , copper tube cutter , ss tube cutter size 16mm , copper pipe size 10mm x 1.5mm , push pull tee size 8x8x8mm , push pull connector male size ¼”xfemale size 8mm. , -do- size ½” x female 8mm. , pvc tube working pressure 12kg/cm2 size 8mm , brass connector with both side nut and female ¼” , brass nut size ¼” , brass ferrule size ¼” , brass connector size ½” male x ¼” female. , brass connector size 3/8”x1/4” , brass elbow with ferrule size ¼” , brass tee size ¼”x1/4”x1/4” , brass reducer size ½ x 1/4” , brass reducer size ½” x 3/8” , brass reducer size 3/8x1/4” , brass ferrule size 10mm , brass connector with nut and ferrule for size 10mm od , aluminium fitting make thread size ¼”x1/4” , -do- size ½”x1/4” , -do- size 3/8”x1/4” , -do- size ¾”x1/4” , aluminium elbow make thread size ¼”x1/4” , ss connector for with nut and ferrule for size 16mm od tube. , heavy duty plumber block for 22334 k bearing (634). , moscot make isi marked double rope safety belt. , indfos make pressure switchrange 0.5mm to 7 kg/cm2, ¼” bsp fittings. , hap/h.guru make pressure gauge 6” dia bottom entry ½” bsp range 0.21 kg./cm2 , -do- range 0.40 kg./cm2 , h.guru make /hap make pressure gauge dia size 2” range 0.10 kg./cm2 back fitting size ¼” , janatics make air filter regulator range 0.10 kg/cm2 with gauge glass zie ¼” , lp make butter fly valve with ss wafer size 1 1/2 “ , clamp for pipe size 1” , u clamp size ¾” , flat belt size 2”x4 ply. , elegator 45 nos. , hydroulic pipe od 20mmx15mm id suitable for 300 kg/cm pressure. , hydroulic ferrule for 20mm od tube. , hydroulic connector with nut size : 20mm , copper tube size 3/8” , brass ferrule size 3/8” , brass connector with nut size 3/8” , ci diaphragram size 80mm , ci diaphragram valve size 50mm , klinger make gauge glass size a-9 , isi marked ci butterfly valve size 40mm , isi marked ci butterfly valve size 100mm , usha martin ltd. make steel wire rope hemp core size 6/19x3/4”(e.d.inclusive agt m.vat) , isi marked nylon rope with t.c. size 20mm , multi screw driver kit.(jhalai make) , mitutoyo make dial indicator with magnetic stand. , lead wire (0.5) mm(500gram per roll) , steam valve high pressure flanged end size ½” , steam valve high pressure flanged size 1” , pu elbow size 8mm , pu connector size 8x8mm , air filter regulator complete with gauge. , cast iron globe value with ss part size 40mm , mud conveyor belt endless 600mm width 3 ply nylon 8mm thick. , sight glass toughened size 200x20mm , sight glass toughened size 100x20mm , ms sprocket 12 teeth x 50mm pitch. , dead nut size ½” , dead nut size 3/8” , brass elbow size 3/8”x3/8” , brass elbow size 3/8”x1/4” , pu tee size 8mm , gauge glass size ¾”x16” , cast iron reflex valve (horizontal +/vertical use) with gun metal working part flanged size 4”. , light resin bounded pads 1.64x1.22x50mm thick.(per sheet of 02 mtr) , becon make teco generator as per serial no. given by you. , becon make teco indicator as per your sr. no. , stainless steel nozzle for de superheating turbine type. , cast steel gauge glass assembly for reflex gauge klinger , pvc tail end flanged heavy duty size 8” , rubber insertion sheet size 5mm , pvc heavy duty end cap size 4” , power grip make heavy duty tin cutter size 12” , chisel , leader make ci butterfly valve with aisi 304 quality wafer size 4”. , leader make ci butterfly valve with aisi 304 quality wafer size 6”. , isi marked ci nrv with gm working part size 6” , teflon rod size 60mmx300mm , imported ph meter. , imported tds meter. , brass connector with 2 nut+2 ferrule 10mm , brass connector with 2 nut + 2 ferrule size 3/8”x3/8” , brass 3/8 male x ¼” female. , brass 1/4” male x 3/8 female. , brass connector complete size ¼”x1/4” , ci pulley close grain 7” -5 groove – b –section. , ci pulley close grain 10”-5 groove – b- section. , ci pulley close grain 13”-5 groove – c- section. , ci pulley close grain 16”-5 groove-c section. , brass connector with 2 nut + 2 ferrule complete. , copper coil size 3/8” od. , plaster of paris. , high pressure hose flexible with female end fitting size 3/8”x1 ½” , -do size ¼”x1 mtr. , dewrance plug sleeve set of 3 pcs size ¾” , rubber conical washer size ¾” , ci nrv with gm working part size 2 ½” , protector for gauge glass size ¾”x16” , v. belt pulley “c” section 4 groove size 7” , teflon rod size 35mmx300mm , -do-12x40 , high pressure hose pipe with both side size ½”x1 mtr. , -do- size ½”x2 mtr. , high pressure hose with bolt side size 3/8x1 mtr. , high pressure hose pipe with both side 3/8x2 mtr. , h.guru/hap make temperature gauge size 6” range 0-350c. , -do- 0-300c. with 3 mtr. capillary stem length 14” , isi marked ci sluice valve flanged end size 1 ½” , leader make gauge glass cock set size ¾” with ibr tc , m.s. nut bolt with washer , m.s. bolt full thread/half thread inch size 1/4 “ to 3/8” , -do- size 1/2 “ to 1 ½ “ , -do- mm size 6 to 10 mm , -do- mm size 12 to 24mm , ms nutsize ¼” to 1 1/2 “ , ms nut mm size 6mm to 24mm , ms washer different size , spring washer bbbb make different size . , h.t. bolt unbrako make different size , split pin champion make different size , ms rivet different size. , alluminium rivit size ¼”x1/2” , nylock nut size 1” , nylock nutsize 24mm , nylock nutsize 27mm , stainless steel allenkeybolt size 8x 25 mm , stainless steel allenkeybolt size 12 x 25 mm , stainless steel allenkeybolt size 12x40 mm , stainless steel allenkeybolt size 12x50 mm , steel screew , s.s. bolt with nut size- 5/8 x 1-1/2apl make , s.s. bolt size- 8 x 25 mm apl make , s.s. bolt size- 8 x40 mm apl make , s.s. bolt size- 8 x50 mm apl make , s.s.nut size- 8 mm apl make , g.i.bolt size- 8 x 80 mm , g.i.bolt size- 6 x75 mm , g.i.bolt size- 10 x100 mm , m.s. fastner bolt size- 12 mm

State Government

TRN :49023612 | 01 Jan, 0001

Tender Value : 9.98 Lacs

Mathura - Uttar Pradesh

Tender for tender for construction work of platter cc painting etc. in the remaining part of 05 tpd wet waste (pit composting) located at the dumping ground. :-work of cleaning the drain:-round circle beautification work

corporations/Associations/Others

TRN :34424386 | 13 May, 2025

Tender Value : 4.69 Crore

Jammu - Jammu And Kashmir

Tender for selection of agency for construction of material recovery facility solid waste management and compost pit of 03 no ulb at ramgarh, thathri, lakhanpur on epc mode

corporations/Associations/Others

TRN :34424390 | 13 May, 2025

Tender Value : 4.35 Crore

Jammu - Jammu And Kashmir

Tender for selection of agency for construction of material recovery facility solid waste management and compost pit of 03 no ulb at ashmuqam, chenani and frisal on epc mode

corporations/Associations/Others

TRN :34420935 | 09 May, 2025

Tender Value : 0

Udhamsign Nagar - Uttaranchal

Tender for door to door garbage collection from government/non-government/commercial establishments and residential buildings, separation of organic and non-organic waste from the collected garbage, compacting the plastic waste with compactor machine and sending it for recycling etc. the work of converting organic waste into fertilizer in the organic fertilizer manufacturing pit built in the mrf center built by the municipality. recovery of user charges. running public awareness campaigns in various wards

corporations/Associations/Others

TRN :48817880 | 01 Jan, 0001

Tender Value : 4.69 Crore

Jammu - Jammu And Kashmir

Tender for selection of agency for construction of material recovery facility (solid waste management) and compost pit of 03 no ulb at ramgarh, thathri, lakhanpur on epc mode

Central Government/Public Sector

TRN :34404893 | 12 May, 2025

Tender Value : 0

Jamshedpur - Jharkhand

Tender for gem bids for clearing jungle including uprooting of rank vegetation grass brush wood trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. "supplying chemical emulsion in sealed containers including delivery as specified. chlorpyriphos or lindane emulsifiable concentrate of 20 percent" "diluting and injecting chemical emulsion for post constructional anti termite treatment excluding the cost of chemical emulsion along external wall where the apron is not provided using chemical emulsion at the rate 7.5 litres or sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall and rodding etc. complete isto with chlorpyriphos or lindane e.c. 20 percent with 1 percent concentration" "earth work in excavation by mechanical means hydraulic excavator or manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m all kinds of soil." filling available excavated earth excluding rock in trenches plinth sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1.5 m supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete. "providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1 isto 3 isto 6 1 cement 3 coarse sand zone iii 6 graded stone aggregate 20 mm nominal size " "providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement all work up to plinth level isto 1 isto 1.5 isto 3 1 cement 1.5 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size " "reinforced cement concrete work in walls any thickness including attached pilasters buttresses plinth roof and string courses fillets columns pillars piers abutments posts and struts etc. above plinth level up to floor five level excluding cost of centering shuttering finishing and reinforcement 1 isto 1.5 isto 3 1 cement 1.5 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size " brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in foundation and plinth in cement mortar 1 isto 6 1 cement 6 coarse sand brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in cement mortar 1 isto 6 1 cement 6 coarse sand "half brick masonry with common burnt clay f .p .s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level. cement mortar 1 isto 4 1 cement 4 coarse sand " "centering and shuttering including strutting propping etc. and removal of form for foundations footings bases of columns etc. for mass concrete" "centering and shuttering including strutting propping etc. and removal of form for suspended floors roofs landings lintals beams balconies and access platform" "steel reinforcement for r.c.c. work including straightening cutting bending placing in position and binding all complete upto plinth level thermo mechanically treated bars of grade fe 500d or more make sail or tata or jindal " "15 mm cement plaster on the rough side of single or half brick wall of mix isto 1 isto 6 1 cement isto 6 fine sand rates for external plastic are for height upto 10m from ground level in less otherwise stated cement make nuvoco lafarge or ultratech or acc or as per direction of eic " "12 mm cement plaster of mix 1 isto 6 1 cement isto 6 fine sand rates for external plastic are for height upto 10m from ground level in less otherwise stated cement make nuvoco lafarge or ultratech or acc or as per direction of eic " "6 mm cement plaster of mix 1 isto 3 1 cement 3 fine sand rates for external plastic are for height upto 10m from ground level in less otherwise stated cement make nuvoco lafarge or ultratech or acc or as per direction of eic " neat cement punning. "finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade new work two or more coats applied at the rate 1.43 ltr or 10 sqm over and including priming coat of exterior primer applied at the rate 2.20 kg or 10 sqm make dulux or burger or asian paints or as per direction of eic" white washing with lime to give an even shade new work three or more coats mix with fevicol ddl and robin blue or as per direction of eic "painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. preferable make dulux or burger or asian paints or as per direction of eic make dulux or burger or asian paints or as per direction of eic" making plinth protection 50mm thick of cement concrete 1 isto 3 isto 6 1 cement 3 coarse sand zone iii 6 graded stone aggregate 20 mm nominal size over 75mm thick bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling and dressing and finishing the top smooth "providing and fixing angle iron frames for doors windows and ventilators of mild steel angle sections of size 35x35x5 mm joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing t iron frame or to the wall with dash fastener including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer all complete as per the direction of engineer in charge. make sail or tata or jindal " "providing and fixing isi marked flush door shutters conforming to is isto 2202 part i decorative type core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including isi marked stainless steel butt hinges with necessary screws" "structural steel work in single section fixed with or without connecting plate including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete. make sail or tata or jindal " 25 mm thick pvc flush door shutters made out of a one piece multi chamber extruded pvc section of the size of 762 mm into 25 mm or less as per requirement with an average wall thickness of 1 mm plus or minus 0.3 mm . pvc foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. m.s. tube having dimensions 19 mm into 19 mm and 1.0 mm plus or minus 0.1 mm is inserted along the hinge side of the door. core of the door shutter should be filled with high density polyurethane foam. the top and bottom edges of the shutter are covered with an end cap of the size 25 mm into 11 mm. door shutter shall be reinforced with special polymeric reinforcements as per manufacturer specification and direction of engineer in charge to take up necessary hardware and fixtures. stickers indicating the locations of hardware will be pasted at appropriate places "providing and fixing isi marked oxidised m.s. sliding door bolts with nuts and scrows etc. complete .as per the direction of directions of engineer in charge.300x16 mm " "providing and fixing ist quality ceramic glazed wall tiles conforming to is 15622 thickness to be specified by the manufacturer of approved make somany or kajaria or nitco in all colours shades except burgundy bottle green black of any size as approved by engineer in charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 isto 3 1 cement 3 coarse sand and jointing with grey cement slurry at the rate 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. make isto somany or kajaria or nitco or asian or as per direction of eic" "providing and laying vitrified floor tiles in different sizes thickness to be specified by the manufacturer with water absorption less than 0.08percent and conforming to is 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1 isto 4 1 cement 4 coarse sand jointing with grey cement slurry at the rate 3.3 kg or sqm including grouting the joints with white cement and matching pigments etc. complete. size of tile 600x600 mm make somany or kajaria or nitco or asian or as per direction of eic" "providing and fixing water closet squatting pan indian type w.c.pan with 100 mm sand cast iron p or s trap 10 litre low level white p.v.c. flushing cistern including flush pipe with manually controlled device handle lever conforming to is 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests preferable make hindware or parrywair or hindustan or cera or direction of eic" "providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and c.p. brass spreaders with brass unions and g.i clamps complete including painting of fittings and brackets cutting and making good the walls and floors wherever required one urinal basin with 5 litre white p.v.c. automatic flushing cistern preferable make hindware or parrywair or hindustan or cera or direction of eic" "providing and fixing wash basin with c.i. brackets 15 mm c.p. brass pillar taps 32 mm c.p. brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require isto white vitreous china wash basin size 630x450 mm with a single 15 mm c.p. brass pillar tap" "providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete. semi rigid pipe 32 mm dia" providing and fixing 600x450 mm beveled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with c.p . brass screws and washers complete. "providing and fixing brass bib cock of approved quality 15 mm nominal bore" "providing and fixing brass stop cock of approved quality 15 mm nominal bore" providing and fixing circular or hexagonal cast iron or m.s. sheet box for ceiling fan clamp of internal dia 140 mm 73 mm height top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron or m.s. sheet box by means of 3.3 mm dia round headed screws one lock at the corners. clamp shall be made of 12 mm dia m.s. bar bent to shape as per standard drawing. providing and fixing isi marked oxidised m. s handles conforming to is 4992 with necessary screws etc. complete 125 mm providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete. providing and fixing is 12817 marked stainless steel butt hinges heavy weight with stainless steel screws etc. complete 100x60x2.50 mm "providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. for external work a. 15 mm dia nominal bore preferable make tata or jindal or as per direction of eic" "providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. for external work b. 20 mm dia nominal bore preferable make tata or jindal or as per direction of eic" providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. for external work d. 50 mm dia nominal bore preferable make tata or jindal or as per direction of eic "providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is 13592 type a including jointing with seal ring conforming to is 5382 leaving 10 mm gap for thermal expansion single socketed pipes. 110 mm diameter" "providing and fixing gun metal gate valve with c.i. wheel of approved quality screwed end isto 20 mm nominal bore" "providing and fixing gun metal gate valve with c.i. wheel of approved quality screwed end isto 50 mm nominal bore" providing and placing on terrace at all floor levels polyethylene water storage tank is isto 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank. providing and fixing 100 mm sand cast iron grating for gully trap constructing brick masonry chamber for underground c.i. inspection chamber and bends with bricks in cement mortar 1 isto 4 1 cement 4 coarse sand c.i. cover with frame light duty 455x610 mm internal dimensions total weight of cover with frame to be not less than 38 kg weight of cover 23 kg and weight of frame 15 kg r.c.c. top slab with 1 isto 1.5 isto 3 mix 1 cement 1.5 fine sand isto 3 graded stone aggregate 20 mm nominal size foundation concrete 1 isto 5 isto 10 1 cement 5 fine sand 10 graded stone aggregate 40 mm nominal size inside plastering 12 mm thick with cement mortar 1 isto 3 1 cement isto 3 coarse sand finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets isto with common burnt clay f.p.s. non modular bricks of class designation 7.5 "constructing masonry chamber 30x30x50 cm inside in brick work in cement mortar 1 isto 4 1 cement isto 4 coarse sand for stop cock with c. i. surface box 100x100 x75 mm inside with hinged cover fixed in cement concrete slab 1 isto 2 isto 4 mix 1 cement isto 2 coarse sand isto 4 graded stone aggregate 20 mm nominal size i or c necessary excavation foundation concrete 1 isto 5 isto 10 1 cement isto 5 fine sand isto 10 graded stone aggregate 40mm nominal size and inside plastering with cement mortar 1 isto 3 1 cement isto 3 coarse sand 12mm thick finished with a floating coat of neat cement complete as per standard design isto with common burnt clay f.p.s. non modular bricks of class designation 7.5" providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level isto 1 isto 1.5 isto 3 1 cement isto 1 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and s.w. drain pipe 100 mm diameter 1.8 m long complete as per standard design. with common burnt clay f.p.s. non modular bricks of class designation 7.5 "cement concrete flooring 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate" "providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm plus 0.05 percent total coated thickness zinc coating 120 grams per sqm as per is 277 in 240 mpa steel grade 5 to 7 microns epoxy primer on both side of the sheet and polyester top coat 15 to 18 microns using self drilling or self tapping screws complete ridges plain 500 to 600mm " "providing and fixing precoated galvanised iron profile sheets size shape and pitch of corrugation as approved by engineer in charge 0.50 mm plus 0.05 percent total coated thickness with zinc coating 120 grams per sqm as per is 277 in 240 mpa steel grade 5 to 7 microns epoxy primer on both side of the sheet and polyester top coat 15 to 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin charge. the sheet shall be fixed using self drilling or self tapping screws of size 5.5 x 55 mm with epdm seal complete upto any pitch in horizontal or vertical or curved surfaces excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required." providing and fixing of glass panes with putty and glazing clips in steel doors and windows all complete with 4mm thick glass panes etc. complete. supply of led tube light fittings .make c.g. or philips fixing of led tube light fittings including supply of all hardwares as required. led fitting will be supplied by contractor. make c.g. or philips supply of 48 sweep ceiling fan complete with down rod.clamp canopy etc. fixing of 48 sweep ceiling fan complete with down rod.clamp canopy etc.fan hardwares required for fixing for i.e. nut bolts clamp screws etc wiil be supplied by contractor. supply and fixing of stepped type electronic fan regulator on existing switch board. wiring for light point fan point exhaust fan point with 1.5 sqmm frls pvc insulated copper conductor single core cable in consield with modular switch modular plate suitable gi box and earthing the point with 1.5 sqmm frls pvc insulated copper conductor cable as required. supply of frls pvc insulated copper conducter single core cable of size 6 sqmm. make havells or kei or polycab or national wiring for circuit or submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor single core cable in consield or recessed medium class pvc conduit in concield as required 2 x 6 sqmm plus 1 x 6 sqmm earth wire. all the three colours should be red blue and green supply and fixing of utility db p or s 20a dp metal plug and socket distribution board grey make anchor or havells supply and installation of three phase industrial box with 32 amp 4 pole mcb and 5 pin top plug. make neptune or reputed make supply of frls pvc insulated copper conducter single core cable of size 10 sqmm. make havells or kei or polycab or national wiring for circuit or submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor single core cable in surface or recessed medium class pvc conduit in concield as required 4 x 10 sqmm + 1 x 10 sqmm earth wire.all the five colours should be red blue yellow black and green preparation of earth pit with supply of all materials including 3m long 3.64mm thick perforted gi tube with salt and charcol in alternate layer and brick chamber at the top with chequered plate 6mm thick as per is 3043 with latest. supply and laying 25mm x 5 mm gi strip at 0.5 meter below ground or wall including connection with electrode with db. supply of all hardware are in scope of contractor supply ans fixing of surface mounting vertical type 415 volts tpn mcb distribution board of sheet steel dust proctected duly power coated painted inclusive 200 amp tinned copper bus bar common neutral link earth bar din bar for mounting mcb with provision of 100 amp tpn mccb as incomer interconnection between incomer mccb and busbar. supply and fixing of 5 to 32 amp rating 240 or 415 volt mcb suitable as per load. supply and fixing of four pole 100 amp rating 415 volt 16 ka mccb . laying of 1.1kv grade pvc al.cable of size 2 or 3 or 3.5 or 4c 2.5 or 6 or 10 or 16 or 25 or 35 sq.mm in underground trench of 760mm deepx760mm wide in single tier formation including trench excavation and back filling with bricks 15brick or m and sand protection route marker. road or concreete or bolder cutting and finishing the road to its original shape are in the scope of the contractor. supply and fixing of street light on wall including supply of all necessaryu hardware for fixing of fitting on wall. supply and fixing of bulk head fitting on wall including supply of all necessaryu hardware for fixing of fitting on wall. supply installation and commissioning of exhaust fan of size 300 mm dia. this includes cutting of wall and finishing and supply of hardware like nut bolts etc. make crompton

Related Searched Keywords : waste pit

List of waste-pit Tenders

Tender for tender for construction work of platter cc painting etc. in the remaining part of 05 tpd wet waste (pit composting) located at the dumping ground. :-work of cleaning the drain:-round circle beautification work

Tender for selection of agency for construction of material recovery facility solid waste management and compost pit of 03 no ulb at ramgarh, thathri, lakhanpur on epc mode

Tender for selection of agency for construction of material recovery facility solid waste management and compost pit of 03 no ulb at ashmuqam, chenani and frisal on epc mode

Tender for selection of agency for construction of material recovery facility (solid waste management) and compost pit of 03 no ulb at ramgarh, thathri, lakhanpur on epc mode

Get waste pit Tender Alert...

Related Searched Keywords : waste pit

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us