Filters

List of synthetic-slag Tenders

List of latest synthetic-slag Tenders in Indian Tenders. Click on any synthetic-slag Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for synthetic-slag Tenders.

All-Tenders (48)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35213809 | 01 Sep, 2025

Tender Value : 0

Kamrup - Assam

Tender for gem bids for pvc wall panel, u clip, beading peace, wall putty, primer, fevicol sh, melamine wood polish

Central Government/Public Sector

TRN :35214152 | 01 Sep, 2025

Tender Value : 0

Kangra - Himachal Pradesh

Tender for gem bids for gear lever assy, cyl head bolt, steering kit, self starter24v, rotary switch, pressure horn 24v, piston ring, piston, door beading lh rh, front spring assy, headgasket, brake pipe, hand brake assy, door beading lhrh mg, wiper blade front, wiper blade rear, fuel tankcap, relay, pressure plate, circlip, fuel pipe, speedometer cable, nut bolt

Central Government/Public Sector

TRN :35214840 | 01 Sep, 2025

Tender Value : 0

Udhampur - Jammu And Kashmir

Tender for gem bids for boq, door regulator lh, door regulator rh, door glass rh, door glass lh, door handle lh, door handle rh, doorcatch inner, door beading, door trim, change overswitch, ignition switch, steering shaft, steering columnbush, clutch cyl assy, sleeve cyl assy, combinationswitch with cover, gear box top assy, air compressorrepair kit, air dryer repair kit, dual brake valve repair kit, sp valve assy, air filter, fuel filter, steering oil filter, vane pump assy, tappet cover gasket, wheel brg front, wheel brg rear, hub oil seal front, hub oil seal rear

Central Government/Public Sector

TRN :35215206 | 02 Sep, 2025

Tender Value : 0

Ludhiana - Punjab

Tender for gem bids for cdr table glass beading

Central Government/Public Sector

TRN :35216338 | 02 Sep, 2025

Tender Value : 63.0 Thousand

Udhampur - Jammu And Kashmir

Tender for gem bids for mt, fuel flexible pipe, assy door lh, steering shaft with ballsocket, front hub bearing, oil seal, assy clutch mastercylinder, speedo cable jis 3000 mm, master cyl assy, flywheel assy, clutch pressure plate, spacer pilot taperroller bearing, pressure plate assy, suspension bush kit, filter fuel, bearing set connecting rod, wiper blade, gear leaver knob, shoe comp brake rear, bearing assyrear, front door beading, oil seal axle shaft

Central Government/Public Sector

TRN :35216815 | 09 Sep, 2025

Tender Value : 0

Kalyan - Maharashtra

Tender for supply of disposable sterile rubber latex gloves, beaded rough textured surface, powder free confirming to is:13422/isi marked of gamma / eto sterilized size :6.5.

State Government

TRN :35217813 | 09 Sep, 2025

Tender Value : 0

Kapurthala - Punjab

Tender for gem bids for college, steel almirah, steel almirah small, fully plasticmoulded chair with arms seat andback cushioned, executive table or office table, library almirahsteel glass front cabinet, laboratoryorlibraryorcanteen table, drawing stool, computertable, computer and printer table, steel rack, conference room table, chemistry lab table, footrest, laboratory table with boxes, lecture stand, laboratory table with drawers, notice board, single seat sofa, three seat sofa, revolving chairbig, revolving chair smallsteel almirah : size:- height-1981mm, width-916 mm, depth - 486mm construction: - the almirah should havewelded type construction. the thickness of back panelshould be 0.8 mm, other components the thickness shouldbe 0.9mm and the shelf thickness should be 1.2 mm doors& handles: - the almirah should have full height steelhinged door & should be provided with handle. locking: -the almirah should be provided with 3 way lockingmechanism & shooting bolt arrangement. shelves & loadbearing capacity: - the almirah should have height wiseadjustable shelf mounting and uniformly distributed loadcapacity per each full shelf should be 80 kg and shelvesshould be 4 in number and should be fully adjustable.powder coating process: - all the metal parts shall be givenantirust surface treatment & and shall be powder coatedwith epoxy polyester powder. it shall involves an 8 steptreatment. final finish shall consists of poxy polyesterpowder coating of approved color & shade with a dry filmthickness of minimum 40 microns. the testing of paint shallbe done for various physical & chemical properties as peris: 101. the material shall then be oven baked with a /bid number: gem/2025/b/6561795* /dated: 25-08-2025 & & / bid document1 / 35 controlled temperature of 1800c to 2000c. manufacturer/supplier must have iso- 9001, 14001, bifma & ohsascertifications. certificates should be attached. leveler:-itshould have leveler with m10 screw type leveler withhexagonal plastic base. , steel almirah small : size:-height 1270 mm, width 765mm, depth 440 mmconstruction: - the almirah should have welded typeconstruction. the thickness of back panel should be 0.8mm, other components the thickness should be 0.9mm andthe shelf thickness should be 1.2 mm doors & handles: -the almirah should be provided with full height steelhinged door & should have handle. locking: the almirahshould have 3 way locking mechanism with shooting boltarrangement. shelves & load bearing capacity: - thealmirah should have height wise adjustable shelf mountingand uniformly distributed load capacity per each full shelfshould be 80 kg maximum and shelves should be 3 innumber and should be fully adjustable shelves. powdercoating process: - all the metal parts shall be given antirustsurface treatment & and shall be powder coated with epoxypolyester powder. it shall involves an 8 step treatment. finalfinish shall consists of poxy polyester powder coating ofapproved color & shade with a dry film thickness ofminimum 40 microns. the testing of paint shall be done forvarious physical & chemical properties as per is: 101. thematerial shall then be oven baked with a controlledtemperature of 1800c to 2000c. manufacturer / suppliermust have iso- 9001, 14001, bifma & ohsas certifications.certificates should be attached leveler:- it should haveleveler with m10 screw type leveler with hex plastic base , fully plastic moulded chair with arms seat &backcushioned : size - total height : 820mm + 10mm, totalwidth : 565mm + 10mm, total depth : 565mm + 10mm&total weight: 4.20 kg + 50gms cushioned chair with armscomprising of single piece moulded frame made ofpolypropylene & coated with pu coating paint high glossfinish with seat & back cushion made of moulded pu foamand velvet upholstery. weight of moulded polypropleneframe is 4.2 kg. , executive table/office table : thesize of the table in mm should be 1500 x 600 x 728 andshould consist of following parts: top: top should furtherconsist of work surface which should be 18mm thick and prelaminated particle board plb. all work surface edgesshould be duly sealed with 2mm thick machine fitted pvcedge banding understructure: understructure shouldconsist of the following components: a.rectangular frame:rectangular frame should be a fabricated component in1.2mm thick crca is:513 with powder coat epoxypolyester b.legs: legs should be fabricated component in38mmx25mmx1.2mm thick ms erw tube is:7138 withpowder coat epoxy polyester c. plastic cap for cable:plastic cap for cable should be made up of injectionmoulded polypropylene. d. leveler glide for leg : levelershould be made of nylon 6 & consist of ms bolt. storage:storage should consist of pedestal. the pedestal shouldfurther consist of a. shell which should be 0.6mm thickcrca is:513 and should have powder coat epoxypolyester as finish. b. drawer tray which should be 0.6mmthick crca is:513and should have powder coat epoxypolyester as finish c. drawer front which should be 0.8mmthick crca is:513 and should have powder coat epoxypolyester as finish d. frame assembly which should be1.2mm thick rca is:513 and should have powder coatepoxy polyester as finish. e lock which should be 10 //bid details2 / 35 lever cam lock f. handle which should be made ofinjection moulded polypropylene g. leveler which should bemade up of nylon 6 and should also consist of ms boltpowder coating process: all the metal parts shall be givenantirust surface treatment and shall be powder coated withepoxy polyester powder. it shall involves an 8 steptreatment. final finish shall consists of poxy polyesterpowder coating of approved color & shade with a dry filmthickness of minimum 40 microns. the testing of paint shallbe done for various physical & chemical properties as peris: 101. the material shall then be oven baked with acontrolled temperature of 1800c to 2000c. manufacturer /supplier must have iso- 9001, 14001, bifma & ohsascertifications. , library almirah steel glass frontcabinet : the size of the almirah should be of 915 mm wx 486mm d x 1981 mm h construction & material: - itshould have welded construction using 0.8 mm thick crcavirgin steel for shelf & 0.9 mm thick crca for all othercomponents. door glasses thickness 5mm should be fittedto full height steel frame. minimum 6 lever locking 2 waylocking mechanism with shooting bolt should be provided.standard size handle to be provided should be chromeplated brass handle shelving: height wise adjustableshelves 4 nos should be provided. uniformly distributedload capacity per full shelf should be 80 kg maximumleveler should be provided which consist of m10 screw typewith hexagonal plastic base. add 10mm to unit height andadditional 10mm for adjustment. powder coating process:all the metal parts shall be given antirust surface treatment& and shall be powder coated with epoxy polyester powder.it shall involves an 8 step treatment. final finish shallconsists of poxy polyester powder coating of approved color& shade with a dry film thickness of minimum 40 microns.the testing of paint shall be done for various physical &chemical properties as per is: 101. the material shall thenbe oven baked with a controlled temperature of 1800c to2000c. manufacturer quality & safety assurancecertificationmanufacturer / supplier must have iso- 9001, 14001, bifma & ohsas certifications. , laboratory/library/canteen table : overall size: 1800 mm w x900mm d x 740mmh +- 10mm tolerance on overallsizes. frame:legs of table frame should be made of erwround pipe of 48mm+- 1.0mm and 1.5mm thickminsupports shall not be more than 160mm from the floor levelwhen measured frombottom of pipe two supports of thesame pipe should be provided breadth wise in betweenthelegs of the frame and two supports should also beprovided length wise between legs supports are welded toeach other properly. the frame top should be made of msangle iron size38mmx38mmx5mmmin.. the bottom of legsshould be closed with metal shoes. top:top should be madeout of 18mm +-1.0mm commercial board fixed with goodquality sunmica 0.75mm thick. shade of sunmica top shouldbe natural teak/ baverian beach. all the edges of thesunmica top should be fixed with teak beading duly spiritpolished. finish all steel components are to be prepared fordegreasing and derusting. after pretreatment, the steel steelcomponents are to be epoxy powdercoated. thickness ofpowder coatingshould be 50-60 micron min. shade ofpowder coating should be nickle grey/ seimn grey. , drawing stool : seat assembly: it is circular type 30.0 0.5cm and made up of 0.1 0.012 cm thickness crsteel. it is welded to the understructure and coated withblack epoxy polyester powder dft 50-80 microns.

Central Government/Public Sector

TRN :35211083 | 01 Sep, 2025

Tender Value : 0

Darjeeling - West Bengal

Tender for gem bids for mt, turbocharger rep kit, front wind screen glasswith beading, door beading, repair kit springbrake actuator, ac belt

corporations/Associations/Others

TRN :35201744 | 01 Sep, 2025

Tender Value : 4.02 Lacs

Kolkata - West Bengal

Tender for restoration of i.p and paver block at bidhan sarani, beadon st., sahitya parishad st., goabagan st. etc, disturbed by c.e.s.c and natural wear and tear in ward no 016. kmc/eec/br-ii/016/08/25-26

Central Government/Public Sector

TRN :35207215 | 01 Sep, 2025

Tender Value : 0

Pithoragarah - Uttaranchal

Tender for gem bids for supply, cement bag 43 grade opc in polythene bags weighing 50kgs sand coarse crushed stone aggregate 40mm graded crushed stone aggregate 20mm graded hard core ofbroken stone aggregate of size 45 to 63 mm tmt steel bar10mm dia sub class b bricks for soakage pit vitrifiedcoloured ceramic tiles 600 x 600 x 9mm thick and doublecharged polished non skid coloured ceramic tiles of size400 x 400 x 7 to 8 mm thick cement white quick settingcompound water proofing compound rr stone prefabricated med shelter of size 12000mm x 9600mm x2800mm and a 1800mm wide and 12000mm long closedverandah and shelter will be provided with three toilets andthree store main trusses 6000mm long main truss will befabricated using rectangular hollow sections of size 80 x 40x 4mm verandah and bathroom trusses 1800mm longverandah truss will be fabricated using rectangular hollowsections of size 80 x 40 x 4mm main columns 3048 mmlong main columns will be fabricated using square hollowsteel section of size 113 point 5mm x 113 point 5mm x4mm verandah and bathroom columns 2100 mm longverandah bathroom columns will be fabricated using squarehollow steel section of size 113 point 5mm x 113 point 5mmx 4mm long purlins 3890mm long purlins shall be madeusing rectangular hollow steel section of 80 x 40 x 4mm end purlins 250mm long purlins shall be made usingrectangular hollow steel section of 80 x 40 x 4mm bracingpre fabricated ms hollow bracing of size 66mm x 33mm x 3point 2mm and 3890mm long bracing pre fabricated mshollow side bracing of size 66mm x 33mm x 3 point 2mmand 5890mm long wall panels the main and partition wallswill be 50mm thick continuous line manufactured sandwichwall hybrid core insulated panels the false ceiling will bemade up of 50mm thick continuous line manufactured bid number gem2025b6593626 dated 21-08-2025 bid document1 94 1 1 hybrid core insulated fireproof sandwich ceiling panels inmin 1100mm width, roof 0 point 60 mm thick ppgi sheetapproved colour fixed with self tapping screws over steelpurlins, ridge cover 0 point 60 mm thick pre coatedcorrugated sheet of approved colour matching with the roofsheet of size and design and 3m long and 900 mm wide, wind ties 12000mm long wind ties of 40 x 5mm ms flat oneach side of roof will be provided and shall be securedadequately to purlins with self tapping screws and steel andbitumen washers and bolts, door of size 900mm x 2000mmmade of powder coated aluminium frame, pvc doorsfactory made pvc moulded door shutter 30mm thick of size750 x 1900mm, window powder coated aluminum twotrack sliding window of size 1200 x 1200 mm with 02 nos ofglass shutter and stainless steel fly proof mesh and outsidealuminium grill shall be provided, aluminum ventilatorpowder coated aluminum ventilator fix type of size 900 x450 mm with stainless steel fly proof mesh shall beprovided, acrylic sheet fixed aluminum frame with 6mmthick acrylic sheet glazing 900mm wide will be providedalong the entire length of the verandah, sunshade asunshade of size 1500mm x 500mm for external windowswill have iron frame for fixing it to the shelter wall, sunshade b sunshade of size 1200mm x 500mm forexternal door and ventilatorss will have iron frame for fixingit to the shelter wall, foundation bolt 25mm dia 750mmlong welded with top and bottom anchor plate of size 250 x250 x 10mm and fixed with bottom base plate of columnusing nuts and bolts, nut bolt of size 12mm dia 75mm longwith washer, nut bolt of size 12mm dia 125mm long withwasher, nut bolt of size 12mm dia 150mm long with washer, rivet full size, self tapping screw 100 mm long, selftapping screw 75 mm long, star screw 15mm long, starscrew 25 mm long, star screw 75mm long, water tankwith staging 02 nos of hdpe 500 ltr capacity water tankand 01 nos of staging 3 point 20 mtr height which will bemade with ms angle iron, ewc vitreous china wash downwater closet cascade type with flushing cistern, wash handbasin vitreous china wash hand basin pedestal type angleback white flat back pedestal pype, bathroom cabinetptmt cabinet with looking mirror for toiletry items of size330mm x 140mm x 530mm with arrangements to fix thesame with wall, ss soap dish holder, cp towel rail 24 mmdia and 600 mm long with fixing fixing arrangement, stainless steel grating 100mm dia isi marked, stainlesssteel grating whith hole for waste pipe of whb, cp bib cock15mm bore long body, cp pillar tap 15 mm bore, cp anglevalve chromium plated steel 15 mm bore, cp stop cockchromium plated steel 15mm bore, chromium platedshower rose 100 mm dia, pvc p trap 110mm dia, pvcfloor trap 110mm dia, pvc elbow 110mm dia 90 degreeangle, pvc elbow 110mm dia 45 degree angle, pvc tee110mm dia, pvc socket 110mm dia, pvc pipe 75mm dia, ppr pipe 32mm dia and 3 layer pn 16 oblique sdr 7 point 4, ppr elbow 32mm, ppr tee 32mm, ppr socket 32mm, ppr union 32mm, ppr reducer socket 32 x 20mm, pprreducer tee 32 x 20mm, ppr reducer elbow 32 x 20mm, ppr tank connector 32mm, ppr gate valve 32mm, pprpipe 20mm dia and 3 layer, ppr elbow 20mm, pprthreaded elbow 20mm, ppr tee 20mm, ppr threaded tee20mm, ppr socket 20mm, ppr threaded socket 20mm, steel connection 600mm long with brass check nuts andrubber washers for gyzer, pvc connection 600mm long withbrass check nuts and rubber washers for bain and flush //bid details2 / 94 cistern, pvc solvent cement, teflon tape 12mm wide and10 mtr long, cgi sheet 3000 x 900 x 0 point 60mm of isimark, gi pipe 2400mm long and 50 mm dia and 1 point5mm thick, 20 watt led tube light fitting and 230v withelectronic ballasts and holder and connector and block etc, auto rechargable led bulb18 w with modular lamp frame, bulk head fitting with auto rechargable led bulb18 w, exhaust fan compact with louver type and plastic body size300mm sweep will be provided, modular pvc switch board8 x 10 inch, modular pvc switch board 6 x 4 inch, modularpvc square box 4 x 4 inch, modular switch piano and flushtype 5 amp, modular dummy switch, modular switchsocket combination 15 amp, modular switch socketcombination 10 amp, wire single core copper conductor 1point 5 sqmm of different colour, wire single core copperconductor 2 point 5 sqmm, electric wire two core 6 sqmmand copper conductor, pvc casing and capping of size25mm, pvc casing capping l bend, pvc casing cappingtee bend, ceiling rose, mcb box 8 way spn, mcb 32 ampsp, change over switch 63 amp 3 phase four pole, electrical geyser 15 ltrs capacity mounted to wall panellinluding fixing arrnangements, tape insulation one and halfx 15 mtr with isi mark, gi wire 14 swg, earthing of buildingwill be provided using 4mm dia gi set earth wire connectingto main board to gi earth plate, lightning conductor madeof copper tube150cm long x 25 mm dia with five copperprongs of length 15 cm each fixed to copper ball of dia50mm and 4mm thick, hard bed overall size shall be1980mm long and 900mm wide and 440mm high, mattresssize 1980mm x 900mm mattress with two layers each50mm thick and first layer of pu foam and second layer ofrubberized coir foam for each bed shall be provided, provision of fire extinguisher 6kgs abc dry powder storedpressure type, keroheater automatic ignition kero roomheater and non toxic fume and weight not less than 12 kgand fuel tank capacity 18 lit with fuel indication gauge, solar hand held light of susolartech or mini lantern powerled with both solar and ac charger, almirah of size1230mm x 595mm x 355mm made of plastic sheet and 2nos horizontal shelf having legs height shall be 100mm, cushion chair red plastic moulded seat cum back withsupport structure including seat cushion and arms, steeltable of size 1200mm x 900mm x 720mm with 18mm thickpre laminated particle board exterior grade is 12823 on topwith 4mm thick teak wood beading with headless nails, water dispenser hot and cold and normal water 20 ltrcapacity with jar of 20 ltr, waste bin plastic waste bin ofsize of waste bin 325 x 325mm at top and 290 x 290mm atbottom with the height of 495mm, shoe rack ms shoerack to be provided for each shelter, curtain rod stainlesssteel curtain rod decorative type 1500mm long 25mm diafor doors and opening including bracket and domes obliquefunnels, tarpaulin hdpe water proof cover in og colour ofsize 12 mtr x 12 mtr, hospital bed mild steel hospital bed ofsize 1900mm x 900mm x 600mm, crash cart stainlesssteel crash cart with abs drawers 06 nos and smoothmobility 04 nos of wheels and locking mechanism andmodular configuration for emergency situation in hospital, medicine oblique injection rack ms heavy duty medicinerack of size 835mm x 300mm x 1675mm of 1mm nominalthick ms sheet with 04 nos shelves having lockable glassdoors, bio medical dustbin plastic portable bio medicalwaste dustbin of 10 ltr capacity, field water heating deviceshamam 500 litrs with five nos of sleeves with 1mm thick ms //bid details3 / 94 cover, solar street light 25w including pole having length 5mtr long and 75mm dia and complete accessories, rivetingmachine, pan motor 18 inch dia, showel with woodenhandle, axes picks 03 kg head with handle, wire mess forseving sand, trowels, brick, water level pipe for mason100 mtr long, sprit level, plum bob steel, nylon masonthread 100 mtr long, measuring tape 05 mtr, measuringtape 30 mtr, safety helmet, gum boot, hand glovesrubber, hand held electric drill machine 10mm cordlessalong with screw head, steel wood cutter circular, cuttingblade 4inch steel, cutting blade 14inch steel, hexa blade350mm long, welding machine portable inverter, weldingrod, auto darkening welding helment, welding gloves, toolkit for electrician, tile cutter machine electric with 05 blade, portable generator set 5 kva, diesel air brooder heater30kw

Related Searched Keywords : synthetic slag

List of synthetic-slag Tenders

Tender for gem bids for pvc wall panel, u clip, beading peace, wall putty, primer, fevicol sh, melamine wood polish

Tender for gem bids for cdr table glass beading

Tender for supply of disposable sterile rubber latex gloves, beaded rough textured surface, powder free confirming to is:13422/isi marked of gamma / eto sterilized size :6.5.

Tender for gem bids for mt, turbocharger rep kit, front wind screen glasswith beading, door beading, repair kit springbrake actuator, ac belt

Tender for restoration of i.p and paver block at bidhan sarani, beadon st., sahitya parishad st., goabagan st. etc, disturbed by c.e.s.c and natural wear and tear in ward no 016. kmc/eec/br-ii/016/08/25-26

Get synthetic slag Tender Alert...

Related Searched Keywords : synthetic slag

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us