Filters

List of synthetic-grass Tenders

List of latest synthetic-grass Tenders in Indian Tenders. Click on any synthetic-grass Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for synthetic-grass Tenders.

All-Tenders (98)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Government Departments

TRN :49020435 | 22 May, 2025

Tender Value : 12.18 Lacs

Chandigarh - Chandigarh

Tender for amc for firefighting equipment installed in various building admin block, a.c. joshi library, arc hall, main guest house, girls hostel no. 3 to 7, in panjab university campus, sector -14, chandigarh.-fire fighting amc 2 annual maintenance contract of fire fighting equipment installed in various building in p.u. campus. the contract includes 4 visit in year to check the equipments i.e. fire buckets, hydrant points, hose box, hose reels, brigade inlet(up to 4 ways), smoke detector panels, smoke senser, mcp, hooters, sprinklers. the accessories which malfunction, broken or irrepairable, shall be changed & cost will be paid in the bill at the time of maintenace.the visit & report of checklist prepared by firm shall be duly checked by s.d.e. incharge & same shall be submitted to office of the undersigned. any complaint of said equipments shall be first report to s.d.e. incharge with immediate effect.after confirmation of complaint , the accessories if any to be fixed shall be , duly approved by engineer in charge at site. 3 butterfly valve 100 mm hand lever operated isi marked replaceable liner cf8m/55316 disc pn 10 cast iron water type butterfly valve size 100 mm (4 inch) 4 fire hydrant auto control fire pump pressure switch kp-35 pressure switch- 060-113391, r-0.2 to 7.5 bar d 07 to 4 bar precisioncontrol for water pumps- wide pressure range. ip 30 for water pump. 5 fire hydrant pressure gauge glycerinindustrialglycerin filled pressure gauge, dial size 2? (50 mm), stainless steel 304 case bayonet type & ss 316l internals, range 0 to 10.6 kg/cm2 with dual scale of 150 psi, direct mounting bottom entry, connection 1/4? npt (m), accuracy 1.6% fsd 6 fire pump panel pump control panel (dol starter 7 5 hp) 7 hydrant pump motor rewinding 8 over hauling of pump and motor 9 12 volt 6ah dry battery for fire panelexide 10 sensorconventional smoke detectorfeatures & benefits: automatic intelligent fire detectors with high reliability and low power consumption used for premises and items of property with medium and high concentration of valuable assets detector series iq8quad features, system advantages designed for optimal operation on system 8000, iq8control and flexes control fire alarm systems with multisensor fire detectors for the detection of all types of fires, even under the most difficult operating conditions and with 360° led visibility in alarmdetector with and without loop isolators different options of installation wiring in loop and spur combination maximum number of detectors with cable lengths of up to 3,500 m with installation cable for fire detection, e.g. cables i-y(st)yn x 2 x 0.8 mm 11 hootersounder cum strobe exclusive range of fire alarm sounder cum strobe for addressable & conventional use with red abs type plastic housings. wall mounted medium frequency sounder strobe designed as per nfpa-72 to complete the demand of fire alarm systems. the fire alarm sounder strobe is a device that produce sound & flashing when manual call point & detector sense any kind of fire activity. it has dual tone sound and it is enough to make alert everyone inside the building 12 fire panel4 zone alarm panel with lcd display for zone indication fault and fire and hooter facility. make: agni device 13 wireless radio emitter with rechargeable batteries & having inbuilt transmitter & storbe with red flasher sounder 14 wireless smoke detectors with mounting kit & testing button with 9v nippo/ eveready battery 15 wire less advance manual call poin with battery push button type & red enclosure & flap cover 16 batteries rechargeable for wireless radio emitter 17 batteries for wireless smoke detector 9v nippo/ eveready 18 batteries for wirelesss advance manual call point 19 wire (mtr) 2 core 1.5 square mm ake poly 20 hammer with chain 21 pendent sprinkler 68 degree, standardresponse, normal coverage.15mm 22 newage /swastik ss fire hydrant single landing valve. size : 63mm/ 75mm/ 80mm, inlet : 4” nb flanged, outlet : female instantaneous conforming specification : is 5290, type “b” , isi marked 23 newage/swastikmake short branch pipe, stainless steel ss304, with 63 mm male inst. inlet, male threaded outlet, with 16 mm bore hexagonal base nozzle, conforming to is: 903. isi marked 24 hose box wall mounting double door type, 30 x 24 x 10 size, to accommodate 15mtr./30 mtr. length of delivery hose and a branch pipe, glass fronted door, with lock,key and a break-glass recess for keys, red in colour 18 gauge sheet 25 newage premier brand all synthetic fibre circular woven jacketed rubber lined fire hose, delivery, 38kg/cm2 burst pressure,22kg/cm2 proof pressure,14kg/cm2 working pressure, bearing is:636-88 type a mark, 63mm x 15 mtr. length duly cooper wire bounded to fire hose coupling, , ss 304, instantaneous type, pair of male and female parts, bearing is:903 mark. 26 newage make drum for hose reelcomplete, duly painted isi marked powdercoated 27 rubber hose-is444-size-20mm length : 30 meter rubber hose (for hose reel drum) water hose,20 mm with (isi mark 444/1987) type-2,w.p. 10 kgf/cm2 with shut off nozzle 28 newage make hose reel pipe with drum,swinging wall mounting type complete with rubber hose-is444- size-20mm length : 30 meter rubber hose (for hose reel drum) water hose, 20 mm with (isi mark 444/1987) type-2,w.p. 10 kgf/cm2 with shut off nozzle 29 newage make air release valve with15 mm dia stop cock. 30 inlet breeching 2 way , sg iron body, 2 nos ss-304 63 mm male inst. inlet with non- return valve, drain valve, 220mm od, 180mm pcd, eight holes of 19mm dia, pvc blank cap & chain, wp 7 kg/cm2, tp 21 kg/cm2, painted red. 31 female coupling washerfor hydrant valveadaptor 32 hydrant seat washer/hydrant tikki 33 ci operating wheel vlavefor hydrant 34 rubber beading with double groove 35 newage make drum for hose reelcomplete, duly painted isi marked powdercoated 36 rubber hose-is444-size-20mm length : 30 meter rubber hose (for hose reel drum) water hose, 20 mm with (isi mark 444/1987) type-2,w.p. 10 kgf/cm2 with shut off nozzle 37 newage make hose reel pipe with drum,swinging wall mounting type complete with rubber hose-is444-size-20mm length : 30 meter rubber hose (for hose reel drum) water hose, 20 mm with (isi mark 444/1987) type-2,w.p. 10 kgf/cm2 with shut off nozzle 38 swastik makeair release valve with 15 mm dia stop cock 39 inlet breeching 4 way, sg iron body, 4 nos ss-304 63 mm male inst. inlet with non- return valve, drain valve, 285 mm od, 150 mm pcd 240 mm, eight holes of 23 mm dia, pvc blank cap & chain, wp 7 kg/cm2, tp 21 kg/cm2, painted red 40 inlet breeching 2 way , sg iron body, 2 nos ss-304 63 mm male inst. inlet with non- return valve, drain valve, 220mm od, 180mm pcd, eight holes of 19mm dia, pvc blank cap & chain, wp 7 kg/cm2, tp 21 kg/cm2, painted red. 41 female coupling washerfor hydrant valveadaptor 42 hydrant seat washer/hydrant tikki 43 ci operating wheel vlavefor hydrant 44 spindle with assembly complete 45 rubber beading with double groove 46 female adaptor of hydrant valve60 mm dia size 47 mcp glass size: 3”x3”, 2mm thick 48 hydrant box glass size:16”x 7” , 4 mm thick 49 blank cap suitable for 63mm hydrant valve outlet 50 hose reel drum nozzle ss 51 hydrant box key

State Government

TRN :49020506 | 31 May, 2025

Tender Value : 0

Bengaluru - Karnataka

Tender for supply of rescue shoring items as per department technical specification - rescue shoring items--1 a mechanical strut with self-retaining thread, plunger with thread. when the plunger is extended the thread shall be self-retaining. the axial displacement per rotation shall not be more than 17 mm. it shall have female snap-lock system on both sides retracted length shall not be less than 250 mm, stroke : 120 mm and weight : 3.5 kg 2 strut with hydraulic single acting cylinder with spring return and a plunger with thread and lock nut. the axial displacement per rotation shall not be more than 17 mm. it shall have female snap-lock system on both sides working pressure : 720 bar / 72 mpa retracted length : 575 mm stroke : 252 mm weight, ready for use : 9.2 kg force at working pressure : 100 kn/10.1 t 3 strut with pneumatic single acting cylinder with spring return with plunger with automatic locking mechanism that locks in steps of 9 mm. retracting the plunger shall be possible only after releasing the locking mechanism. it shall have female snap-lock system on both sides working pressure : 8 bar / 0.8 mpa retracted length : 632 mm stroke : 252 mm weight, ready for use : 8.4 kg force at working pressure :4 kn/0.4 t 4 a suitable hydraulic pump shall be provided for using the hydraulic strut. the pump shall be fitted with a pressure gauge 0-720 bar with rubber protection cover and with 3 m. hose and quick coupler. the pump shall be mounted on a wooden plate. working pressure : 720 bar / 72 mpa effective capacity oil tank : 700 cc output per stroke 1st stage : 11 cc up to 30 bar output per stroke 2nd stage : 2 cc up to 720 bar weight ready for use : 9.9 kg 5 extension pipe fitted with male snap-lock system on one side and female snap-lock system on the other side. length : 125 mm colour code : white weight : 1.5 kg outside diameter : 90 mm working load : 100 kn/10.1 t 6 extension pipe fitted with male snap-lock system on one side and female snap-lock system on the other side. length : 250 mm colour code : blue weight : 1.9 kg outside diameter : 90 mm working load : 100 kn/10.1 t 7 extension pipe fitted with male snap-lock system on one side and female snap-lock system on the other side. length : 500 mm colour code : yellow weight : 2.8 kg outside diameter : 90 mm working load : 100 kn/10.1 t 8 extension pipe fitted with male snap-lock system on one side and female snap-lock system on the other side. length : 1000 mm colour code : green weight : 4.6 kg outside diameter : 90 mm working load : 100 kn/10.1 t 9 a suitable connector with female snap-lock on both sides shall be provided to connect the male end of an extension pipe with one of the saddles weight : 1.4 kg outside diameter : 89 mm working load: : 100 kn/10.1 t 10 2-way block to support 2 tilting heads.. weight : 6 kg 11 3-way swivel head with 3 integrated swivel heads for use with up to 3 shoring lines in various directions. weight : 9.1 kg 12 support plate for use with the tensioning belts and cylinders or extension pipes,. the plate should support 3 swivel heads or a cross head and up to 3 tensioning belts. weight : 4.0 kg cross head 4 nos. weight : 1.1 kg 13 v-block small (aluminium block) to support on or against tubes. weight : 0.7 kg diameter : 89 mm 14 tilting head on plate with nailing holes in the plate for support on uneven or tilting surfaces. max. angle 45° in all directions. weight : 2.5 kg dimensions : 150 x 150 mm 15 swivel head mounted on a sphere to place the head in almost any position. weight : 2.0 kg 16 tilting head for support on uneven or tilting surfaces. max. angle 45° in all directions. weight : 2.5 kg, dimensions : 95 x 95 mm 17 v-block large (aluminium block) to support on or against tubes. weight : 1.7 kg opening x width : 141 x 100 mm 18 pointed head for support in narrow gaps weight : 1.2 kg diameter : 89 mm 19 cone head for support on or against hard concrete or steel surfaces. the point shall be of hardened steel to partially penetrate the surface and prevent the strut or extension pipe from sliding away weight : 0.5 kg diameter : 89 mm 20 flat head (round aluminium saddle) for support against a flat, soft surface like wood. 2 nos. weight : 0.3 kg diameter : 89 mm 21 hook wrench shall be adjustable to create a pre-load with the mechanical strut diameter : 90 mm tensioning belt 6 nos. weight : 1.4 kg length : 4.0 m width : 35 mm load : 10 kn/ 1 t 22 rope 5 mtrs long with carabine hook. to lower struts, or wrapping around the strut 23 flat head (saddle) for support against a flat soft surface like wood. the steel plate (150150 mm) shall have holes to nail the saddle to wood. weight : 0.8 kg dimensions : 150150 mm 24 beam support l-shape for support on or against very wide beams. the beam support shall have holes to nail it to wooden beams. weight : 1.0 kg 25 beam support 100 mm for support on or against upto 100 mm wide beams. the beam support shall have holes to nail it to wooden beams. weight : 1.2 kg 26 beam support 150 mm for support on or against upto 150 mm wide beams. the beam support shall have holes to nail it to wooden beams. weight : 1.7 kg 27 pressure reducer with air hose 2 m. with coupler suitable for both 200 and 300 bar air cylinders 28 double control unit for simultaneous operation of 2 tools with safety valves set at 8.5 bar and operation by means of push buttons with auto lock couplers 29 air hose length 10 metres colour blue with standard coupler on both sides. 30 air hose length 5 metres colour yellow with standard coupler on both sides. 31 anti-roll block made from flexible rubber to prevent struts and extension pipes rolling on uneven surfaces and protect against dirt and damage. 32 synthetic carrying / storage bag for struts and extension pipes. 33 storage / carrying bag for accessories

State Government

TRN :49020537 | 26 May, 2025

Tender Value : 4.90 Lacs

Ghaziabad - Uttar Pradesh

Tender for tender for work of making composite pit near mrf center in nagar panchayat patla - ordinary soil(loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the engineer i/c with in a lead of 50m. 2 providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) and curing complete,including cost of form- work,in foundation and floors. 3 r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than m-200.same as above but for thelighterbeams i.e. having spans upto 6 m. (using 1:1.5:3 mix concrete) 4 r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than m-200.but inr.c.c.raft foundation and footingwithapproved stone ballast.(using1:1.5:3mix concrete) 5 r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than m-200.but incolumn withapproved stone ballast.(using1:1.5:3mix concrete). 6 class m-150 brick work in 1:4 cement coarse sand (of 2.20 fineness modulus) mortar infoundation & plinth including supply of all materials, labour, tools and plants etc. required for proper completion of the work. 7 pcc (1:2:4) cement c sand with 20mm gauge approved stone ballest including. supply of all material,labour and tool and plants etc.s.i 279(a) 8 class-150 brick work in 1:4 cementand coarse sandmortar in super structure including supply of all materials, labour tools and plants, etc. required for proper completetion of the work. 9 m.s. steel or plain work such as r.c.c or r.b. work including bending for proper shape as necessary including bending for proper complition of the work and including supply of all steel & wastages, bend hooks and authorised overlapping shall be measured. s.i.no. 504 10 12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 4 coarse sand. 11 mild steel or iron work in purlins and rafters including drilling holes and fixing in position and including supply of all steel and bolts and nuts, wastage, labour and tools and plant etc. required for proper completion of work (no material shall be issued by department) 12 supply and fixing of galvanized corrugated iron roofing in position including supply of all materials, labour, tools & plants etc required for proper completion of work and including wastage. 0.80mm thick 13 painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as luxol3,hi-gloss apcolite superlac, dulux specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. for steel surface. 14 add gst 18%

Government Departments

TRN :49021216 | 14 May, 2025

Tender Value : 29.76 Lacs

Mirzapur - Uttar Pradesh

Tender for tender for construction work of bar bhawan in nav yuvak advocate samiti tehsil complex chunar - clearing jungle including up rooting of rank vegetation grass bush wood trees and sapling of girth upto 30cm. measured at a height of 1 meter above ground level and removal of rubbish upto a distance of 50m. outside the periphery of area cleared as per si.no. 2.31 2 earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kinds of soil as per si.no. 2.8.1 3 excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. (under floor) as per si.no. 2.25 (a) 4 supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. as per si no 2.27 5 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) as per si no. 4.1.8 6 brick work with common burnt clay (non modular) bricks of class -150in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) as per si no- 6.1.2 7 providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level in :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) as si no-5.1.2 8 providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) upto plinth lvl as si no-5.1.2 9 reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)above plinth lvl as si no-5.2.2 10 providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) upto plinth lvl as si no-5.1.2 11 reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). above plinth lvl as si no-5.3 12 reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). as per si no. 5.3 13 reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (slab) as per si no. 5.3 14 steel reinforcement for r.c.c. work ready to use cut and bend rebars of approved make from factory/workshop to construction site including placing in position and binding all complete in thermo-mechanically treated bars of grade fe-500d or more. as per si. no.- 5.22 b.1 15 brick work with common burnt clay bricks of m-150 class in super structure above plinth level upto floor v level in all shapes and sizes in cement mortar 1:6 ( 1 cement : 6 coarse sand ) as per si no 6.4.2 16 steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc.in grantings, frames, guard bar, ladder, railing, brackets, gates and similar works as per si no. 10.25.2 17 providing and fixing angle iron frames for doors, windows and ventilators of mild steel angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing t-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of engineer-in-charge. m.s. angle 35x35x5 for door frames as per si no. 10.31 18 12 mm thick cement plaster of mix 1:6 ( 1 cement & 6 course sand ) outer side as per is 13.4.2 19 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone ) finished with floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. 40 mm thick floor 20 mm nominal size stone aggregate. as si no. 11.3.1 20 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per sl no. -13.62.1 21 distempering with 1st quality acrylic distemper (ready mixed) having voc content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : new work (two or more coats) over and including water thinnable priming coat with cement primer having voc content less than 50 gram/litre as per sl no. -13.41.1 two coats 22 finishing walls with acrylic smooth exterior paint of required shade: new work (two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) as per sl no. -13.46.1 two coats 23 centering and shuttering including stutting, propping etc. and removal of form.beam /band as per si- 5.9.5 24 centering and shuttering including stutting, propping etc. and removal of form.column as per si- 5.9.6 25 centering and shuttering including stutting, propping etc. and removal of form.foundation as per si- 5.9.1 26 centering and shuttering including stutting, propping etc. and removal of form.slab as per si- 5.9.3

Co-operative

TRN :49021218 | 20 May, 2025

Tender Value : 0

Kaimganj - Uttar Pradesh

Tender for supply of cleaning equipments , item , flexible shaft for tube cleaning having antifriction with 19 mm inner core doublewounded made from high tensile springsteel wire and outer casing of 34-35 mm made from galvanized steel strip provided with anti friction liner or full length with guard ball bearing complete in all respectwith hand piece. , hand piece for above flex.shaft complete. , end side nipple for inner core a-motor end-1/2” , b-outer end-3/8” , tool head cutter for 39 mm/42 mm i.d. tube en-31 material having 12 straight and 3 level gears(total 15 gears) spring loaded,self expending & fitted on 3 bridge type arms. , tool head cutter for 47/48mm i.d. tube en-31 material having 12 straight and 3 level gears spring loaded ,self expending & fitted on 3 bridge type arms , tool head cutter for 52/53mm i.d. tube en-31 material having 12 straight and 3 level gears spring loaded ,self expending & fitted on 3 bridge type arms , toolhead cutter 57 mm , toolhead cutter 63/ 69mm/76mm , toolhead cutter 91 mm , turk head brush for100mm , do42mm/39mm , do 47mm , double spiral brushes for 39/43 mm i.d. tube , do 47mm , do 150mm , do 100mm , scrubbing wire brushes (foundry) for general industrial use filled with round steel wire 6”x3” , sugar grader brush with long handle filled with roundsteel wire producing 1” to 1.25” , gun barrel nylon brush size - 12 mm , sugar bag trolley made from angle iron 40”x18” suitable for carrying a load of 150-220kgs. fitted two polymere wheels 10”x2”x1” complete in all respects (coloured) , sugar bag trolley made from angle iron 40”x18” suitable for carrying a load of 150-220kgs. fitted two polymere wheels 10”x2”x1” complete in all respects (white) , synthetic polymere wheels for sugar bag trolleys 10”x2”x1” (white) , synthetic polymere wheels for sugar bag trolleys 10”x2”x1” (coloured) , spare inner core 19 mm size , tool head cutter 57 mm , tool head cutter 69mm/76mm , tool head cutter 91 mm , cup shape brush 57 mm , cup shape brush 63mm/69mm/76mm mm , cup shape brush 91 mm , spare cutter for 70 mm tool head cutter. , spare cutter for 76 mm tool head cutter. , spare cutter for 100 mm tool head cutter. , flexible shaft inner core 10 mm outer core 32 mm , cone shape brush for boiler tubes cleaning suitable for 76 mm , do 70 mm , do63.5 mm , do 42.45 mm

Co-operative

TRN :49021807 | 20 May, 2025

Tender Value : 0

Kaimganj - Uttar Pradesh

Tender for supply of rubber goods , item , shynthetic rubber bush for mill turbine. size- m-50 , do-m-48 , neoprene rubber seat for double beat valve as drg. no. m-209 a. , neoprene rubber o ring for double beat valve as drg. no. m-209 b. , neoprene rubber seat for double beat valve o.d.95 mm x 12.5mm thick , neoprene rubber seat for double beat valve o.d.160mm x bore 12 mm x20 mm thick , neoprene rubber seat for double beat valve o.d.175 mm x20 mm thick , neoprene rubber seat for juice weighing scale 320 mm dia x 195 mm bore x 30 mm thick , neoprene rubber seat for waterweighing scale 495 mm dia x40 mm thick , rubber air seal -1 , synthetic garlic packingsize1 square , synthetic garlic packing size1/2 square , neoprene seat for pan discharge valve drg. m-12 & 12 a , synthetic rubber hose for vaccum filter size-2.25x18 , taper plug o.d. 30mm x 60mm length ,65 mm bore 12.5 mm , tapper plug size- 42x45 , tapper plug size- 96 x 100 , neoprene rubber diaphragm as per drg. m-26 b , synthentic rubber bucket 3 as per drg. m-18b , synthentic rubber bucket 4 as per drg. m-18a , rubber buffer drg.as per drg. m-52 , six star coupling as per drg.m-etp-01 , mill hydraulic bucket in synthetic rubber with canvas instructed drg. no. m-13 , sugar grader coupling m-62 , neoprene rubberdiaphragm 6 sunder valve drg. m-95 , rubber strip for molasses seprator of size ½ thick, 48¼ i.d. x50-7/8 mmo.d. , rubber diaphrgm valve sheet for diaphragm valve80mm , rubber diaphrgm valve sheet for diaphragm valve40mm , rubber bottom seal ring of continuous m/c. drg. cc m-102 , synthetic rubbercoupling bush size , bore-3/4o.d.-1¼ length-1¼ , bore-1/2o.d.-1.3/4 length- 2 , bore-1/2o.d.-3/4 length-2 , bore-1/2o.d.-1 length- 2 , bore-1o.d.-2 length-2 , bore-1/2o.d.-1.1/2 length- 1 , bore-1/2o.d.-1.25 length-1.25 , bore-1o.d.-1.3/4 length- 2 , bore-1/2o.d.-1/2length- 1.25 , bore-5/8o.d.-1.1/2 length-2 , bore-1.1/8 o.d.-2.5length- 3 , bore-1 o.d.-2 length-2.5 , bore-1/2o.d.-1.1/4 length- 1.5 , bore-1/2o.d.-1.5 length-2 , bore-3/4o.d.-1.5 length- 2 , bore-3/4o.d.-1.25 length-1.5 , bore-3/4o.d.-1.3/4 length- 2 , bore-5/8o.d.-1.25 length- 1.25 , bore-25mmo.d.-45 mm length-45 mm , bore-11 mmo.d.-20mm length-17 mm , rubber seat for pan discharge valve drg. m-164 , rubber bush 75mm length x 65 mm od x 30 mm i.d. , ruber sheet for double beat valve 190 mm dia x8mm thickness and 20 mm bore , neoprene round sheet 495 mm x 25 mm , neoprene round sheet 350 mm x 12.5 mm , neoprene round sheet 480 mm x 32 mm , neoprene round sheet 330 mm x 35 mm , rubber bush 30 mm x 18 mm bore x 30 mm thick , rubber bush 29 mm length x 15 mm bore x 31 mm thick , ruber sheet for double beat valve 95 mm dia x 12.5 mm thick , ruber sheet for double beat valve 160 mm dia x 12 mm bore x 20 mm thick , ruber sheet for double beat valve 175 mm dia x 20 mm thickness , rubber strip for vibroscreen as per sample , ruber sheet for double beat valve 160 mm dia x 12 mm bore x 20 mm thick , round rubber sheet size 180 mm o.d. x 10 mm bore x 6 mm thich

State Government

TRN :49021820 | 15 May, 2025

Tender Value : 0

Chamarajanagar - Karnataka

Tender for short term e-tender for the supply of drugs and surgicals for cims teaching hospital, chamarajanagar - rubber sheet1 roll,baby wipes1x10,baby undersheet1x30,lacs kit1x1,baby pampers 1x5,diaper adult1x5,biomedical waste cover blue1x25,biomedical waste cover yellow1x25,biomedical waste cover red1x25,biomedical waste cover green1x25,biomedical waste cover black1x25,disposable needle 18g 1x1001x100,disposable needle 16g 1x1001x100,triamcinolone 40 mg 1x1 vial,n acetyl cystine1x1 vial,hermin 1x1 vial,dicyclamine 20mg/ml1x1 vial,quincke spinal needle no.261x1,hiv kit1x1,crepe bandage 15 mm1x1,crepe bandage 10 mm1x1,thyronorm 25mcg 1x10x101x10x10,thiamine 100mg/ml, 1x2ml amp1x1 amp,theophylline plus etophylline, 50.6mgplus169.4mg/2ml, 1x2ml1x1 amp,sugamadex 1x1 vial,methylprednisolone 500mg1x1 vial,iv heamoccel 1x1,carboprost 250 mcg/ml1x1 amp,caffiene citrate 1x1 vial,eye drop moxifloxacin with dexamethasone1x1,eye drop gentamycin1x1,eye drop ciprofloxacin1x1,surgical spirit( 500 ml)1x500ml,sodium hypochlorite- 5 ltr can1x5 ltr,lysoformin 300 fumigation1x1,hydrogen peroxide 100ml 1x11x1,betadine solution 10percent with dispenser 500ml1x1,betadine scrub 10 percent, 500ml with dispenser1x1,antiseptic lotion, sterrillium 1x500ml1x1,antiseptic handwash - isopropyl alcohol, spray, 1x500ml1x1,povidone iodine, 0.05, ointment, 1x125g1x1,lignocaine hydrochloride, 0.02, jelly, 1x30gm1x1,clotrimazole 1percent cream 1x15gm1x1,dualine respules1x5,salbutamol 2mg/5ml1x1 btl,phenaramine hcl syrup, 1x1 btl,paracetamol oral drops1x1 btl,paracetamol, 125mg/5ml, 1x60ml syrup1x1 btl,calcium plus vitamin d3 syrup1x1 btl,bromhexine, 4mg/5ml, 1x100ml1x1 btl,albendazole suspension syrup1x1 btl,ambroxol 30mg plus levosalbutamol 1mg1x1 btl,amoxicillinplusclavulinic acid, 200mg plus 28.5mg/5ml, powder for suspension, 1x30ml1x1 btl,usg gel1x1,microzid fumigation solution 1ltr1x1,utility gloves1x1 pair,surgical blade no-23 1x1001x100,surgical blade no-22 1x1001x100,surgical blade no-15 1x1001x100,surgical blade no-11 1x1001x100,sevoflurane 250ml1x1,sanitary napkins 1x101x10,ryles tubes, 18f, 1x11x1,ryles tubes, 14f, 1x11x1,polypropylene nonabsorbable synthetic surgical mesh 7.5 cm x 15 cm, 1x11x1,poly propylene mesh, 15cm x 15cm, 1x31x3,poly propylene mesh, 10cm x 6cm, 1x31x3,n-95 mask1x1,nasocath nasal prongs1x1,isoflurane 100ml1x1,icd bag 1x1,icd 34f 1x11x1,icd 32f 1x11x1,icd 30f 1x11x1,icd 28f 1x11x1,grbs strips (control d) (1x100)1x100,follys catheter with bulb (sterile) 30ml, size 16f1x1,follys catheter size 10f1x1,follys catheters with bulb (sterile) 30ml, 18f, 1x11x1,examination gloves (disposable gloves) 1x100 (medium size)1x100,epidural set1x1,endotracheal tubes with cuff (pvc)(sterile), 6.5, 1x11x1,endotracheal tubes with cuff (pvc) (sterile), 6, 1x11x1,endotracheal tubes with cuff (pvc) (sterile), 5.5, 1x11x1,endotracheal tubes with cuff (pvc) (sterile), 5, 1x11x1,ecg roll size no.6208 (6mm x 20m) 1x3 rolls1x3,disposable apron1x1,disposable needle 26g 1.5 inches 1x1001x100,disposable drape kit1x1,cling drape1x1,biological indicator1x1,blood transfusion set, 1x11x1,baby tag1x1,bain circuit (adult)1x1,trihexyphenidyl hydrochloride 2mg 1x10x101x10x10,risperidone 2mg 1x10x101x10x10,phenobarbitone 60mg, 1x10x101x10x10,phenobarbitone 30mg, 1x10x101x10x10,metronidazole, 400mg, 1x10x101x10x10,mesoprostal 200mcg 1x4x101x 4 x 10,lorazepam 2mg 1x10x101x10x10,lithium carbonate 300mg 1x10x101x10x10,levetiracetam, 500mg, 1x10x101x10x10,iron and folic acid 200mg 1x10x101x10x10,ibuprofen 400 mg 1x10x101x10x10,ibuprofen 200 mg 1x10x101x10x10,follic acid 5mg 1x10x101x10x10,fluconazole, 150mg, 1x10x101x10x10,escitalopram, 10mg, 1x10x101x10x10,ecosprin 75mg 1x10x101x10x10,elasto plaster1x1,dicyclomine hydrochloride 500mg 1x10x101x10x10,chlorpheniramine maleate, 4mg, 1x10x101x10x10,cefixime, 200mg, 1x10x101x10x10,carbamazepine 200mg 1x10x101x10x10,carbamazepine 100mg 1x10x101x10x10,calcium carbonate with vitamin d3, 500mgplus250iu, 1x10x101x10x10,amoxicillin plus clavulinic acid, tablet, 625mg, 1x10x01x10x10,amitriptyline, 25mg, 1x10x101x10x10,acyclovir, 400mg, 1x10x101x10x10,tetanous toxoid 1ml amp1x1 amp,succinylcholine,50mg/ml1x1 vial,strepto kinase 15 lakh iu1x1 vial,rocuronium,100mg1x1 vial,ringer lactate, as per ip, 1x500ml1x1 bottle,propofol,100mg medium chain triglyceride1x1 vial,pralidoxime chloride(2- pam), 1g, 1x1vial1x1 vial,phytomenadione (vitamin k1), 0.5mg/ml, 1x11x1 vial,phytomenadione (vitamin k1), 1mg/ml, 1x11x1 vial,phenorgan1x1 vial,phenytoin sodium, 50mg/ml, 1x2ml1x1 amp,pentazocine 30mg, 1ml1x1 amp,pethidine 2ml/100mg1x1 vial,paracetamol, 1gm/100ml, 1x100ml1x1 bottle,pantoprazole 40mg 1x1 vial1x1 vial,oxytocin 5 iu1x1 vial,ondensetron 2mg/ml, 1x2ml1x1 amp,normal saline 3 ltr1x1 bottle,normal saline (sodium chlorid) 0.9percent w/v, infusion ffs, 1x500ml1x1 bottle,normal saline (sodium chlorid) 0.9percent w/v, infusion ffs, 1x100ml1x1 bottle,nitroglycerine 5mg/ml, 5ml1x1 amp,nacl 100ml 3percent 1x1 bottle,myopyrollate,1x5ml1x1 vial,mvi 1 amp1x1 amp,morphine1x1 amp,midazolam,1mg/ml 5 ml1x1 vial,metronidazole, 500mg/100ml, 1x100ml1x1 bottle,mephentermine,10ml1x1 vial,methylergometrine, 0.2mg/ml 1x1 1x1 vial,metaclopromide 2 ml 10mg1x1 vial,magnesium sulphate, 500mg/ml, 1x2ml1x1 vial,lorazepam 2mg/ml, 1ml1x1 amp,lignocaine 2percent, 50ml preservative free1x1 vial,linezolid 600mg1x1 vial,ketamine 500mg1x1 vial,iron sucrose, 100mg/5ml, 1x5ml1x1 vial,human mixtard 30/70 1x1 vial,human actrapid 1x1 vial,heparin aq 1000 iu/ml, 1x10ml1x1 vial,heparin (unfractionated) 5000 iu/ml, 1x5ml1x1 amp,haloperidol 5mg/ml1x1 vial,glycopyrollate,0.2mg/ml1x1 vial,fentanyl, 100mcg/2ml1x1 amp,ephedrine 1ml1x1 vial,drotoverine hcl1x1 vial,tab domperidone 10 mg1x10x10,dopamine 40mg/m,l 1x5ml1x1 amp,diazepam 5mg/ml, 2ml1x1 amp,diclofenac, 25mg/ml, 1x3ml1x1 amp,clonidine, 1ml preservative free 150 mcg snap off ample1x1 amp,ciprofloxacin hydrochloride, 200mg/100 ml, 1x100ml1x1 bottle,carbetocin 100 mg1x1 amp,carboprost 125 mcg/ml1x1 amp,calcium gluconate, 100mg/ml, 1x10ml1x1 vial,buscopan 20mg/ml1x1 vial,butadol 1mg1x1 vial,bupivacaine 0.5 percent 20ml1x1 vial,inj. albubine 100 ml1x1 vial,atropine sulphate, 1mg/ml, 1x1ml1x1 vial,atropine ( vial ) 100ml1x1 vial,atracurium besilate, 10mg/ml, 1x1vial1x1 vial,anti rabies vaccine1x1 vial,aminophylline,25mg/ml 10 ml1x1 vial,amiodarone 50mg/ml, 3ml1x1 vial,adrenaline bitartrate, 1mg/ml, 1x1ml1x1ml,adenosine 3mg/ml, 1x2ml 1x2ml,acyclovir, 250mg, 1x1vial 1x1vial

Government Departments

TRN :49021952 | 15 May, 2025

Tender Value : 0

Rajnandgaon - Chhattisgarh

Tender for nit-60 defect liability works under mmgsvy pkg.no. mmgsy-bmr-dlp-01 in dist. bemetara-cutting of branches of trees shrubs and trimming of grass and weeds. trimming of grass and weeds from the shoulders/berms and disposing off the same to suitable locations as per technical specifications clause 1914 restoration of rain cuts restoration of rain cuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment, level and slopes as per drawings and technical specifications clause 1902 maintenance of shoulder (filling with fresh selected material)making up loss of material/irregularities on shoulders to the design level by adding fresh approved selected material and compacting it with appropriate equipment at omc upto a lead of 1000 m as per technical specification clause 1903 maintenance of shoulder (filling with fresh selected material)making up loss of material/irregularities on shoulders to the design level by adding fresh approved selected material and compacting it with appropriate equipment at omc upto a lead of 1000 m as per technical specification clause 1903 maintenance of wbm road including filling up of pot holes, ruts and rectifying corrugated surface, damaged edges and raveling as per technical specification clause 1906. prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per technical specification clause 502 tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503. 20mm thick open-graded premix carpet using bituminous (vg/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of aggregate 13.2mm size (passing 22.4mm size sieve & retained on 11.2mm sieve and 11.2mm size (passing 13.2mm sieve and retained on 5.6mm sieve) either using penetration grade/ vg bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per technical specification clause 508., viscocity grade (vg) bitumen specification as per is 73:2006 seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per technical specification clause 510, viscocity grade (vg) bitumen specification as per is 73:2006 maintenance of road signs maintenance of road signs by way of cleaning and repainting of mandatory/ requlatory / cautionary/ informatory and place identifications sign board as perdrawing and technical specification clause 1910. providing and fixing of typical pmgsy informatory sign board with logo as per mord specifications and drawing. three ms plates of 1.6 mm thick, top and middle plate duly welded with ms flat iron 25mm x 5m size on back on edges. the lower plate will be welded with ms angle iron frame of 25mm x 25mm x 5mm. the angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 swg sheet tubes posts duly embedded in cement concrete m-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. the top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 swg steel plate tube. all m.s. will be stove enameled on both sides. lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. all sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1 cautionary, mandatory, informatory direction and place identification sign boards.semi-reflective traffic signs upto 0.90 sqmdirection and place identification signs up to 0.9 sqm size boardproviding and erecting direction and place identifications of semi reflective sign boards as per irc:67 made of 2 mm thick m.s. sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per mord specifications of required shade and colour. supported and welded on 47 mm x 47mm of 12 swg square tube of 3050 mm height duly strengthened by 25 mm x 5 mm m/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with m-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and technical specification clause 1701 reinforced cement concrete m15 grade kilometre stone/local stone of standard design as per irc:8 fixing in position including painting and printing, etc as per drawing and technical specification clause 1703 5th kilometre stone (precast) ordinary kilometer stone (precast) 200 m stone (precast) maintenance of culverts maintenance of hume pipe culvert by way of clearing, cleaning,erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification clause 1908. maintenance of culverts slab type maintenance of slab type culverts by way of clearing, cleaning,erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification clause 1908. white washing two coats on parapet walls of cd and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications clause 1915 backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification clause 1204.3.8i. granular material

corporations/Associations/Others

TRN :49022685 | 10 May, 2025

Tender Value : 10.32 Lacs

Kanpur - Uttar Pradesh

Tender for tender for 29-construction of entrance gate in gram panchayat bhaura block-sumerpur - steel work in built up tubular (round hollow tubes ),trusses etc. including cutting ,hoisting ,fixing in position and applying a priming coat of appd. steel primer including welding and bolted with special shaped etc. comp. in all respect hot finished seamless type tubes /pole dsr code no 10.16.2 2 s/f of 25.00mm long steel polished screw with washer 3 painting work with three coat of appd. synthetic enamel paint with one coat of primer 4 construction of r.c.c. foundation size 1.80x1.80mtr. and 1.80 mtr deep for builtup overhead structure including earth work in execavation 150mm thick lean concrete in 1:4:8 cement and coarce sand and 40mm gauge stone ballast r.c.c. with 1:1.5:3 cement ,coarse sand and 20mm stone grite including supply and groutingnof 25mm dia foundation bolt(600mm longas per provision of structure including cost of reinforcement and shuttering including all material ,labour t&p etc. required for proper completion of work including cartage up to site and all taxes labour cess etc. all complete work as per direction of e/i earth work in execavation in foundation by mech. means dsr code no 2.6.1 5 sand filling in foundationdsr code no 2.27 6 lean concrete in 1:4:8 infoundation dsr code no 4.1.8 7 r.c.c. 1:1.5:3 in foundation up to ground level dsr code no 5.1.2 a 8 reinforcement 2% of r.c.c. dsr code no 5.22a.1 9 trasportation .labour charges, t&p such as hydra and other tools etc. 10 providing & fixing of reflective signs with a corrosion resistant 4 mm thick with 04 to 0.5 mm both side aluminium skin aluminium composite panel face to be fully covered with high intensity prismatic sheeting type iv as per irc 67 2012 retro reflective sheeting with back frame ms angle of 35x35x5 mm. legends, letters, numerals and borders etc should be as per morth specification no-801.37 the sheeting shall have a pressure sensitive adhesive of the aggressive-tack type requiring no heat solvent other preparation for adhesion to a smooth clean surface, in a manner recommended by the sheeting manufacturer the acm (aluminium composite materials) shall be fixed on the back frame ms angle with riveting. micro prismatic type iv retro reflective sheeting (confirming to astm d4956- 09 shall be pressure fixed the retro reflective sheeting (shall be tested for a certificate or having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility liner removal, adhesion, impact resistance, specular gloss and fungus resistance meeting the requirement of three years outdoor weathering of the sheeting as per irc 67-2012 & proof of the same report shall be uploaded which quoting (tende: the rate shall include all materials labour t&p transportation, installatic and incidentals all complete as per direction of the engineer-in-charge morth 801 s.i. no 11 lucknow sor

Central Government/Public Sector

TRN :49023019 | 01 Jan, 0001

Tender Value : 0

Katni - Madhya Pradesh

Tender for supply of set of synthetic resin bonded glass fibset of synthetic resin bonded glass fib,set of synthetic resin bonded glass fibre extra cable cleat for tm cable for e-b eam cable size 300 sq.mm to drg no. elw/bsl/4/f-88.187, ref. 1 & 2. [set consist of ref.1= 01 no. an d ref.2= 1 no] [ warranty period: 30 months after the date of delivery ] ] => limited

Related Searched Keywords : synthetic grass

List of synthetic-grass Tenders

Get synthetic grass Tender Alert...

Related Searched Keywords : synthetic grass

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us