Filters

List of stone-aggregate Tenders

List of latest stone-aggregate Tenders in Indian Tenders. Click on any stone-aggregate Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for stone-aggregate Tenders.

All-Tenders (32)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35766126 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Dausa - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

State Government

TRN :35770100 | 10 Nov, 2025

Tender Value : 0

Ahmednagar - Maharashtra

Tender for supplying material - moorum vibratory rollor 8 to 10 tonne water tanker 5 to 6kl capacity aggregate 90 to 45mm power roller for 60mm laterite metal steel centring for foundation electric vibrator aggregate 40mm (hand broken) blasted stone aggregate 12.5mm stone aggregate 20mm coarse sand as per is 383 @ 0.45 cum portland cement hire charges of concrete mixer 0.25 to 0.40cum with hopper generator 250kva fine sand ( zone iv) tile cutting machine bitumen ng 30 tin (60/70) material cost rs.1/- per unit extra charges for construction of cement concrete road at gavantargat at dhoki tal- parner

Central Government/Public Sector

TRN :35735319 | 10 Nov, 2025

Tender Value : 14.43 Lacs

Baramulla - Jammu And Kashmir

Tender for gem bids for provision of fd water supply scheme from gotla nala waterpoint to chaukas post, composite multi layer pipe withaluminium core interior tube bound, gi tank nipple 25mm 6inch with check nut and washer complete, ppr elbow32mm, ppr socket 32mm, ppr equal union inner dia25mm and outer dia 32mm complete, ppr end cap 32mmdia suitable for 32mm outer dia pipe, ppr connector 32mmdia suitable for 32 25mm outer dia pipe, ppr tee 32mm diasuitable for 32mm outer dia pipe, ppr reducer 32mm diasuitable for 32mm outer dia pipe, gi nipple 25mm 3 inchlong, m seal 100 gm each pkt complete., cotton thread100m long complete., bib cock brass 15mm, gi nipple25mm 4 inch long, gi nipple 25mm 6 inch long, gi equalunion inner dia 25mm and outer dia 32mm complete., gitee 25mm, gi tee 15mm, gi socket 25mm, gate valvebrass gun metal 25mm dia complete., gi pipe 15 mm diamed grade, gi pipe 20 mm dia med grade, gi reducer25mm to 15mm, gi elbow 25mm, gi elbow 15mm, ginipple 15mm 4 inch long, gi nipple 15mm 6 inch long, gisocket 15mm, gi union 15mm, gi union 25mm, gi plug25mm, gi plug 15mm, tmt anchor pins to secure cmlpipe at 10m distance, triplex plunger pump of 7 point 5 hp, triplex plunger pump of 5 hp, pre fabricated pump shedof size 2.4m x 2.4m, rotational moulded polyethylenewater storage tanks 5000 ltrs, quick setting compound, natural m sand find sand, aggregate 20mm stoneaggregate, aggregate 40mm stone aggregate, commonbuilding burnt clay bricks sub class b of size 23cm x 11.5cmx 7.5cm, hdpe sand bag, tasla iron 18 inch, masontrowel karchi, plaster trowel with hard wooden handle isimarked, showel with wooden handle, brick hammer 1.2kgs, multipurpose non slip rubber gloves for scrubbingcleaning brick work etc, adjustable spanner 12 inch, hacksaw frame with 2 blade, fawda with wooden handle, pipe wrench 12 inch, pipe wrench 18 inch, crowbar 25mm5 feet long, aluminimum spirit level 6 inch, brick line, rammer with wooden handle wt 5 kg, spanner adjustable18 inch, plumbing dye set 25 50 mm, hacksaw frameblade double end

State Government

TRN :35739602 | 10 Nov, 2025

Tender Value : 77.70 Lacs

Kota - Rajasthan

Tender for clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, construction of embankment with material obtained from borrow pits construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305.3, construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), kilometre stone reinforced cement concrete m15 grade kilometre stone/local stone of standard design as per irc:8 fixing in position including painting and printing, etc as per drawing and morth specification clause 801 200 m stone (precast), providing and erecting typical citizen's information board as per approved drawing & specification made of two ms sheet of 1.6 mm thick each of size 900mm x 750mm stiffend by angle iron 25mmx25mm x 3mm all around the plate & plates fixed on frame of 75mm dia pipe of 12 swg sheet (vertical post 3050 mm with angle holdfasts and horizontal member 900mm) to be joined by embedded in cement concrete m-15 grade of block of 600mmx 600mm x 750 mm size below ground level as per enclosed drawings & as directed by engineering incharge. all ms will be stove anmeled on both side lettering. figuring and border will be with ready mixed synthethic enamel paint of superior quality in required shade and colour etc complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per specification, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special applicator machine complete with a special applicator machine complete with labour material and traffic diversion arrangements

State Government

TRN :35740326 | 10 Nov, 2025

Tender Value : 45.00 Lacs

Sikar - Rajasthan

Tender for material supply - ghadla/kankar/jhajhra, mortar-soil/mud masala, kiln lime for lime masonry work, cement, ppc. , white cement, fine aggregate, sand/gravel, gravel - local, ash, surkhi, stone powder (tone dust, masonry programme), mud stone/tick, stone 40mm of standard size(hand broken pieces)(voice cut 1/11), 40mm stone pieces(crushed by crusher)(voice cut) 1/11), 20mm pieces of stone(broken by crusher), 12/10/6mm pieces of stone(broken by crusher), tank earth, material for road work(including 5 cm. lead), 63-40 mm crushed stone (voice cut 1/11), 90-45 mm. hand broken stone aggregate (voice cut 1/11), very ribush (voice cut 1/6), gravel, binding material., stone, solag / kharanja / machining stone, machining bera, machining raksha, kharanja solag, jodhpuri type stone strip / arch / slab pieces (length 2-3', width 10-12", thickness 2.5-3.5"), stone chips, sandstone, 25mm thickness, floor / slab cutting slab, floor slabs upto 35mm thick, min. 3 sqft or more area, slab for slab 60-75mm thickness, min. 3 sqft or more area , unpolished rough kota tone, polished kota tone (one side polished), marble stone, marble chisels, marble powder, marble stone, stone door frame, stone leaves, fr pvc insulated copper conductor single core cable isi marked, fittings in local wood (for doors, windows & furniture), mango, babul, factory made doors, charl steel, iron, winding wire, iron girders, cornice iron/square bars/strips/angle iron, barbed iron wire, mesh, iron mesh, cement concrete mesh akash patal 40 mm thick, glass, 3 mm. coarse glass, paint, enamel paste, dipping paper, 7 lime - for whitewashing (saw/bud), primer (for iron/wood), petroleum productsin gram panchayat binjasi ps dhod for mgnrega and other scheme in financial year 2025-26 binjasi 04

State Government

TRN :35740492 | 16 Nov, 2025

Tender Value : 50.00 Lacs

Bharatpur - Rajasthan

Tender for supply of civil constriction goods - ghadla/kankar/jhajhra mortar - clay/mud mixture kiln lime for lime masonry work cement ppc white cement fine aggregate sand/gravel gravel - local fly ash surkhi stone dust (for masonry use) gitti stone/brick (for other than road work) 40mm stone crushed (hand-crushed grit) (voids cut 1/11) 40mm stone crushed (crushed) (voids cut 1/11) 20mm stone crushed (crushed) 12/10/6mm stone crushed (crushed) brick crushed road material (including 5 km lead) 63-40mm hand-crushed stone crushed (voids cut 1/11) 90-45mm hand-broken stone aggregate (1/11" voids cut) quarry rubbish (1/6" voids cut) gravel (1/6" voids cut) kankar (1/6" voids cut) binding material (pi 4-6) (1/6" voids cut) brick (22.5 x 11 x 7.50 cm) first class (1st class) second class (2nd class) soling/kharanja/masonry stone masonry berada (rr) masonry rubble (cr) kharanja soling (for floor work up to 15 cm height) kharanja soling (for road/kharanja work up to 23 cm height) stone arch (width 10-12", length 2-3', thickness 2.5-3.5") stone arch (flaky material) (3-4" thick & length, 1-2" width) sandstone (dpc, sill, coping, lintel, stand, almirah, etc.) up to 25mm thick up to 25-40mm thick up to 40-50mm thick up to 50-75mm thick up to 75-100mm thick up to 100-150mm thick flooring/strip paving catalog stone flooring catalogs up to 35mm thick, min. 3 sqft or more area catalogs for strip paving 60-75mm thick, min. 3 sq ft or more area unpolished rough kota stone up to 900 sq cm 901 to 2300 sq cm more than 2300 sq cm polished kota stone (one side polished) up to 900 sq cm 901 to 2300 sq cm more than 2300 sq cm marble stone (makrana adanga 20 mm thick) 901 to 2300 sq cm up to 900 sq cm more than 2300 sq cm marble chips marble powder marble stone (rajnagar ii quality/local 20 mm thick) 901 to 2300 sq cm up to 900 sq cm more than 2300 sq cm stone frame single patam size 100 x 75 mm. double patam size 125 x 75 mm. stone slabs up to 1.5 m length, minimum 40 mm thick 1.5 m to 2.4 m length, minimum 50 mm thick 2.4 m to 3.0 m length, minimum 65 mm thick above 3.0 m length, minimum 75 mm thick precast tiles / blocks glazed size - 30 x 45 cm mosaic size - 40 mm thick vitrified size - 60 x 60 cm interlock tiles/bricks/blocks for road work cement interlocking block m-30 grade, 60 mm thick cement interlocking block m-30 grade, 80 mm thick cement interlocking block m-30 grade, 100 mm thick fr pvc insulated copper conductor single core cable, isi marked 1.50 sq mm 2.50 sq mm 0.50 sq mm 1.00 sq mm 4.00 sq mm 6.00 sq mm local wood with fittings (for doors, windows, and furniture) mango acacia other factory-made doors (30 mm thick, solid core, single-pane) structural steel iron (tor steel fe 415/500 for reinforcement) winding wire 18 gauge iron girders conical iron/square rebar/patti/angle iron barbed iron wire (size 12 gauge wire and 12 gauge strand/12 gauge wire and 14 gauge strand/14 gauge mesh iron mesh (24 gauge, 14 mesh) cement concrete mesh 40 mm thick glass 3 mm thick glass paint enamel paint distemper (water bound) lime - for painting (saw / bud) primer (for iron/wood) petroleum products diesel hsd movil oil bitumen shalitex board (25 mm thick) plain sheet (plain sheet) gi sheet 22 gauge (0.80 mm) gi sheet 24 gauge (0.63 mm) ms sheet 22 gauge (0.80 mm) ms sheet 24 gauge (0.63 mm) corrugated sheet gi sheet 1 mm thick gi sheet 22 gauge (0.80 mm) asbestos cement sheet 6 mm (2.5/2.75 x 1 m) other sheets pvc sheet 1 mm thick (colored/plain) green & yellow litheroof expo sheet (183x90) pipe gi 15 mm diameter (b class) gi 20 mm diameter (b class) gi 25 mm diameter (b class) ac 75 mm diameter ac 100 mm diameter pvc 90 mm diameter (with ring) pvc 110 mm diameter (with ring) pvc 140 mm diameter (with ring) pvc 110 mm (2.5 kg/sq.cm) with coupler sanitary indian w.c. orrisa w.c. european w.c. foot rest porcelain urinal with lipped hole (430350300mm) coupling, bracket, and pvc waste pipe washbasin (450x300mm) with coupling, bracket, and pvc waste pipe stone beam (sw) pipe 100 mm diameter, 0.6 m long cp pillar cock (15 mm diameter) (is mark) cp bib cock (15 mm diameter) (is mark) 125 mm diameter cp grating rcc np3 hume pipe with collar 1200 mm diameter 1000 mm diameter 750 mm diameter 600 mm diameter 450 mm diameter 300 mm diameter steel conduit (isi marked) 20 mm diameter 25 mm diameter charcoal pvc water tank with cover ( (conforms to is:12701-1989) 13/0.20 mm twin core pvc sheathed flat flexible copper cable steel fasteners 6 mm x 75 mm pvc conduit, isi marked 25 mm diameter 20 mm diameter junction box 20 mm two-way 20 mm one-way 25 mm two-way 20 mm one-way (pvc) module gi box for 3 modules for 2 modules module base and cover plate for 2 modules for 3 modules modular switch, one-way, isi marked sp 15/16 ampere sp 5/6 ampere modular socket outlet, isi marked 3 pin 5/6 ampere 6 pin 15/16 ampere mcb db 2+2 they, spn, siunder mnrega and other scheme for session 2025-26 gram panchayat mundiya panchayat samiti nagar

Central Government/Public Sector

TRN :35710936 | 17 Nov, 2025

Tender Value : 0

Leh Ladakh - Jammu And Kashmir

Tender for gem bids for cement sand stone aggregate 12.5-20mm stone aggregate 40mm rr stone quick setting compound. white cement lime bitumen bricks bats or stone agg 40 to 63mm graded pcc block 400x200x200mm bituminous filler board size 2.40 x 1.20 mtr

Central Government/Public Sector

TRN :35714961 | 18 Nov, 2025

Tender Value : 32.26 Lacs

Jammu - Jammu And Kashmir

Tender for gem bids for supply and stacking of materials aggregate 40 mm size, supply and stacking of materials stone aggregate 20 mmsize, supply and stacking of materials stone aggregate 10mm size, supply and stacking of materials coarse sand

State Government

TRN :35720004 | 10 Nov, 2025

Tender Value : 20.00 Lacs

Jaipur - Rajasthan

Tender for supply of construction materials- ghadla/kankar/jhajhra, mortar-soil/mud masala, kiln lime for lime masonry work, cement, ppc. , white cement, fine aggregate, sand/gravel, gravel - local, ash, surkhi, stone powder (tone dust, masonry programme), mud stone/tick, stone 40mm of standard size(hand broken pieces)(voice cut 1/11), 40mm stone pieces(crushed by crusher)(voice cut) 1/11), 20mm pieces of stone(broken by crusher), 12/10/6mm pieces of stone(broken by crusher), tank earth, material for road work(including 5 cm. lead), 63-40 mm crushed stone (voice cut 1/11), 90-45 mm. hand broken stone aggregate (voice cut 1/11), very ribush (voice cut 1/6), gravel, binding material., stone, solag / kharanja / machining stone, machining bera, machining raksha, kharanja solag, jodhpuri type stone strip / arch / slab pieces (length 2-3', width 10-12", thickness 2.5-3.5"), stone chips, sandstone, 25mm thickness, floor / slab cutting slab, floor slabs upto 35mm thick, min. 3 sqft or more area, slab for slab 60-75mm thickness, min. 3 sqft or more area , unpolished rough kota tone, polished kota tone (one side polished), marble stone, marble chisels, marble powder, marble stone, stone door frame, stone leaves, fr pvc insulated copper conductor single core cable isi marked, fittings in local wood (for doors, windows & furniture), mango, babul, factory made doors, charl steel, iron, winding wire, iron girders, cornice iron/square bars/strips/angle iron, barbed iron wire, mesh, iron mesh, cement concrete mesh akash

Central Government/Public Sector

TRN :35705364 | 13 Nov, 2025

Tender Value : 0

Jammu - Jammu And Kashmir

Tender for gem bids for cgi sheet 8 feet, aggregate 20mm, sand, cement, stonebolder, pvc cable, bed switch, socket 5 amp, socket 15amp, cgi sheet, brick, a pole, y junction, clamp, nutand bolt with washer, barbed wire, concertina coil1050mm, weld mess panel, pvc copper wire singe core 1sqmm, pvc copper wire singe core 1.5 sqmm, servicecable 2 core 10 sqmm, ceiling rose, squre box, casingcaping, angle holder, led bulb 12 watt, tube light, pvcbox for single switch, pvc box for double switch, wall fan, mcb 16 amp dp with box, ss combination 5 amp, sscombination with box, self taping screwing head less, tape insulation, switch 5 amp, sand bags, service cable16 core 10 sqmm, gi pipe 80 mm, gi flange 80 mm, gisocket 80 mm, gi union 80 mm, nut and bolt 12x65 sqmm2, service cable 10 sqmm 2 core, dia set 100 mm, dieset 80 mm, dia set 40 mm, hex blade, pipe wrench 600mm, pipe wrench 900 mm, spainer 19 and 21 no, spainer22 and 24 no, adjustable spainer 300 mm, hexa frame, pipe vice 50 mm, pipe vice 80 mm, pipe vice 100 mm, safeda araldale, leather sheet, m seal, taflon tap, cable16 sqmm 2 core, cable 16 sqmm 4 core, wooden doorhandle, sliding bolt with nut for wooden door, woodendoor chitkani, screw 1 inch, tapping screw 1.5 inch, nutbolt, star bit, adopter, window glass 21.5 x 19 inch, window glass 22 x 19 inch, window glass 21.5 x 18 inch, hinges, die set, pipe wrench 12 inch, pipe vice wrench, 50 mm shs 3.65mm thick strutural pipe, ppgi 12 feetroofing sheet 0.50mm thich, sd screw 75 mm, sd screw38mm, metal cutter blade disc diameter 355mm, metalcutter blade disc diameter 100mm, welding rod, synthetic enamel paint green, synthetic enamel paintblack, synthetic enamel paint while, red oxide, prepainted steel khapril roof sheet, punched tapeconcertina coil, laip 6, 16 sqm two core elect wire, gardendecocative light with stand with pole, 1.5 sqmm 2 core elecwire, insulation tape large, flaxible wire 1.5 sqmm, ledlight, security light 45 watt, fountain light 6 watt, greenflood light led 100 watt, mcb 63 amp, mcb 32 amp, bulbholder, bulb zero watt, mcb box 4 way, mcb box 2 way, conduict pipe, 1 hp motor pump, 2 hp motor pump, mcb10 amp, led ladi light, combined 16 amp switch box, piano 5 amp switch, 5 amp 3 pin socket, fan regulator, calling bell //bid details2 / 83

Related Searched Keywords : stone aggregate

List of stone-aggregate Tenders

Tender for gem bids for cement sand stone aggregate 12.5-20mm stone aggregate 40mm rr stone quick setting compound. white cement lime bitumen bricks bats or stone agg 40 to 63mm graded pcc block 400x200x200mm bituminous filler board size 2.40 x 1.20 mtr

Tender for gem bids for supply and stacking of materials aggregate 40 mm size, supply and stacking of materials stone aggregate 20 mmsize, supply and stacking of materials stone aggregate 10mm size, supply and stacking of materials coarse sand

Get stone aggregate Tender Alert...

Related Searched Keywords : stone aggregate

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us