Filters

List of solid-alum Tenders

List of latest solid-alum Tenders in Indian Tenders. Click on any solid-alum Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for solid-alum Tenders.

All-Tenders (21)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :34843071 | 29 Jul, 2025

Tender Value : 0

Amravati - Maharashtra

Tender for gem bids for "prelam 2shutter wardrobe 900lx600dx1800ht without mirrorproviding and fixing wardrobe without mirror of size 900lx600dx1800h the wardrobe side panels and doors are made up of 18mm thick prelam partiole board with both side decorative laminate all exposed edges are sealed with rmm thick pvc edge banding the shelves are made of 18mm thick prelam particle board with decorative laminate on both sides the top is made of 36 mm prelam particle board with decorative laminateon both sides 18mm pralam partiole board and 18mm batons on all sides to achieve 36mm overall thickness the exposed edges of the top are sealed with 2mm thick pvc edge banding the top most part of the wardrobe has an aluminum hanger rod of bbco make one drawer of size 400wx150hx450d made of 18mm thick prelam particle board has been considered ; " "prelam 2 shutter wardrobe 750lx600dx1200ht without mirrorlow height top 18mm thick prelaminated partical board with rmm pvc edge band on all edges carcass (body shutter back 18mm thick prelaminated partical board with pvc edge band on all exposed edges shelf four adjustable and one fixed shelf made of prelaminated partical board with pvc edge band on all edges shutters lockable swing shutters with c handle hardware hettich hinges ; " prelam storage 1050lx450dx750ht supply fitting & fixing of sos make prelam stormge storage top shall be made of 25mm thick prelam (osl particle board for low height prelam storage up to 750 height and above 750mm height 6mm thick prolam (osi particle board is used both the 25mm and 18mm thick prelam (osl particle board confirmning to is 12823 1990 with rmm thick pvc lipping glued with kliberit 779 6 glue storage top is under goes from distributed load test for deflection by applying 0 027kg mm lond on top and concentric load test by applying 90kg load on weaker section load carrying capacity of 18mm thick shelf shall be 25kgs udl storage body ; "high back chair adjustable seat height armrest looking mechanism seat lock swivel wheels head support wxh 630mx1140m frame material sold wood upholstery type cushion diy ;" "sofa ease 2seater leatherette finish ss legs 1500x750dx880h for ground floor vip suit living area specifications frame the sofas frame is made from solid sustainable wood and commercial ply upholstery fabric leatherette upholstered back and sea base frame 40x22x16mm thk ss pipe base frame finish ss mirror finish modules 1seater 3seater ;" sofa ease 3seater leatherette finish sslegs900lx750dx880h for ground floor vip suit living area specifications frame the sofas frame is made from solid sustainable wood and commercial ply upholstery fabric leatherette upholstered back and seat base frame40x22x16mm thk sspipe base frame finish ssmirror finish modules 1seater3seat the construction shall be aesthetically appealing completely knook down construction fitting is done by using the minifix dowels gable end height will be 725mm and its depth varies as per the depth of work top standard depth of work top will be soo mm and 750mm ; piss center table 1200wx600dx350h for vip tea table table top to be made of 12mm thick plain toughned glass uderstructure to be made of ss finish ; public seating in configuration 3seating metal perforated benches levellers they are made of injection moulded nylon 6and is used for level adjustment for any unevenness on the floor they are fitted to the leg assembly leg assembly it is a powder coated legs to support the firm seating structure above and are made of ms they have threaded nuts welded to fit section for fixing levelers to the leg armrest it is made of oblong tube and is joined to the frame section at the ends to provide the sturdiness to the structure these armrests are strong to provide the needed comfort when leaning on seat ; providing fixing cotton curtain with rod and stiching three fold table top is under goes from distributed load test for deflection by applying 0027 kg mm lond ontop and concentrio lond tost by applying rokg load on weaker section understructure gable end is made up of romm thick dual color edge in sandwich of 25 the prelam partiale board and mm the bsl prelam particle board confirming ti s 128231990 in alate grey with 2 mm 045 mm thick pvc lipping glued with kliberit 7796 glue ; prelam free standing table1800lx200dx750ht with rb rf pedestal4000x450dx670ht supply fitting & fixing of sos make prolam cabin work top shall be made up of work top shall be made 25mm thick prelam osl particle board confirming to is128231990withmm thick pvc lipping glued with kliberit7796glue work top is under goes from distributed load test for deflection by applying 0027kg mm lod on top and concentric load test by applying rokg load on weaker section understructure modesty panel shall be made of 18 mmthick prelam bsl particle board confirming to is 128231990 with 2mm thick pvc lipping glued with kliberit7796 glue gable ends shall be made of 25mm thiok prelambsl particle board confirming tois128231990 "prelam free standing table 1800l200d750ht with rb rf pedestal 4000450d670ht supply fitting fixing of sos make prolam cabin work top shall be made up of work top shall be made 25mm thick prelam osl particle board confirming to is 12823 1990 with mm thick pvc lipping glued with kliberit 7796 glue work top is under goes from distributed load test for deflection by applying 0027kg mm lod on top and concentric load test by applying rokg load on weaker section understructure modesty panel shall be made of 18mm thick prelam bsl particle board confirming to is 12823 1990 with 2mm thick pvc lipping glued with kliberit 7796 glue gable ends shall be made of mm thiok prelam bsl particle board confirming to is 128231990 ; " "60linear sharing and non sharing workstation1350lx500x12000ht with cmm glass separator (frosted panel 600lx450h and key bord traysupply fitting & fixing of sos make sl60modular workstation work top work top shall be made 25mm thick prelam osl particle board confirming to is 128231990with2mm thick pvc lipping glued with kliberit 7796glue table top is under goes from distributed load test for deflection by applying 27kg mm load on top and concentric load test by applying sokg load on weaker section ; " "slide60 frame 1200ht for cubicle partition supply fitting & fixing of sos make sl 60modular workstation frame the frame shall be made of extruded aluminum sections having 60mm width and average wall thickness 1 6mm the frame shall be powder coated with epoxy polyester powder with the average thickness 50 to 60 microns conforming to is 138711993 the frame shall be joined together by aluminum connectors and all visible aluminum shall be powder coated main frame shall be of 60mm thickness offering various functional and decorative finishes as well as cable management capacity height of frame available 1200mm width of frame available 1050mm 1200mm joints posts connectors trims the two frame shall be joined together in 90 degree by using post connector shall be made of crca sheet confirming to is513 2008 connectors shall be fitted to a pole with the help of m6 x 16 pan head machine screw and washer the comers shall be concealed by posts covers which shall be a half round aluminum profiles made up of aluminum extrusion confirming is733 1983 tiles the tiles shall be made to fit the shape of the module and frame these tiles shall be supported from top and bottom sides with the tile holder tile holder used to incorporate the tile at specified location shall be made of 1 2m aluminum extrusion confirming the is 733 1983 with specified powder coating finish up 50 to 60 micron tiles are made up of by following material prelaminated tiles laminate tiles shall be made up of 9mm thick prelam one side laminated particle board confirming to is2046 1995 in color as specified and 1mm groove is made on both the edge of the tile ; " chair chair made up of puarms premiumcrca tubular pipe framing duly powder coated with mesh back moulded seat cushioned with4850mmfoam ; office chair with height adjestable base for conferance room vip waiting area room done chair dimension overall height 800mm seat size 410mmwx420mmd backrest size 390mmhx580mmw supplying and placing a chalr bucket assembly the bucket assembly made up of injection moulded in pu foam and upholstered with leatherite polyurethane foam have following propertles density 5055kgm 3understructure the understructure is made up of 32x16mmthick swage plpe and25x25x12mm thick square pipe powder coated in black color having dft50to80micron fabric seat fabric malfino properties content 100polyester weight 160gsmleatherlte propertles content 100polyesterwelght268gsm ;

State Government

TRN :34843231 | 30 Jul, 2025

Tender Value : 17.76 Lacs

Trivandrum - Kerala

Tender for gem bids for office chair v3 q2, steel shelving cabinets adjustabletype confirming to is 3312 v4 q3, metal beds v3 q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellercertificate requested in atc, oem authorizationcertificate, additional doc 1 requested in atc, additionaldoc 2 requested in atc, compliance of boq specificationand supporting documentin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?no -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension1 d /bid number: gem/2025/b/6405627; /dated: 15-07-2025 & & / bid document1 / 15 ; 9; 9 d d, , m m -- / / number of days for which bidwould be auto--extended7 o %o % ;5 ;5 ; ; /bid to ra enabledno 4 4 /type of bidtwo packet bid4 4 r r /primary product categoryoffice chair v3 s s & u & u /time allowed for technicalclarifications during technical evaluation2 days v v b b w w v v 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno s s /estimated bid value1776000 s s w w /evaluation methoditem wise evaluation/ y & y & /arbitration clauseno /mediation clauseno //bid details /emd detail b /requiredno /epbg detail > /advisory bankstate bank of india 4 %/epbg percentage%5.00 b /duration of epbgrequired months.38a. , , \ v < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. \ \ /beneficiary : director, sctimstsree chitra tirunal institute for medical sciences and technology sctimst, thiruvananthapuram, departmentof science and technology dst, ministry of science and technologydirector, sctimst /splitting2 / 15 ; / bid splitting not applied. /mii purchase preference /mii purchase preferenceyes /mse purchase preference /mse purchase preferenceyes1. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 2. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 3. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. s s s s / evaluation method item wise evaluation method contract will be awarded schedulewise and the determination of l1 will be done separately for each schedule.the details of item-consignee combination covered under each schedule are as under:3 / 15 s /evaluation schedules s /estimated value & / / item/category /quantityschedule 1208000office chair v332schedule 2800000steel shelving cabinets adjustable typeconfirming to is 3312 v432schedule 3768000metal beds v364office chair v3 32 pieces 5 5 1 2 & & % % % % ^ ^ < < % % 4 4 b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively u u /technical specifications u / as per gem category speci cation /speci cation u u /specificationname b b s s /bid requirementallowed valuesgeneralrequirementchair typenon-revolving and non-tilting chair with armrest, non-revolving and non-tilting chair without armrestunderstructurechair understructure typecantilever, legsunderstructure materialerw tube conforming to is : 1161 latest, aluminiumpipe hollow section conforming to is: 1285 latest, stainless steel ss 202, stainless steel ss 304, stainless steel ss 316, mild steel, solid woodthe shape of tubularsection of understructureround, square, rectangular, elliptical, nasection sizediameter/sides ofunderstructure19 mm, 22 mm, 25 mm, 30 mm, 19x19 mm, 25x25mm, 30x30 mm, 25x15 mm, 30x12 mm, 30x15 mm, 30x20 mm, 45x19 mm, 35x15 mm, 38x20 mm, naunderstructure wallthickness mm1, 1.2, 1.6, 2, 2.5, 3, na for woodcastoryes, noseatseat materialmoulded pu, pu foam, mesh, caned, hot pressedplywooddensity of pu used in seatkg per cubic meter< 30, >30< 40, >40< 50, >50, nathickness of pu used inseat mm< 30, >30< 40, >40< 50, >50, naminimum seat height fromfloor surface mm< 400, >400< 500, >500width of seat mm< 400, >400< 450, >450depth of seat mm< 400, >400< 450, >450seat upholstery materialmesh fabrics, polyester fabric, leatherette, leatherette with spacer fabric, leather, caned, moulded pu4 / 15 backrestbackrest base framematerialmild steel frame, hot pressed plywood, solid wood, injection moulded plasticbackrest materialmoulded pu, pu foam, mesh, caned, hot pressedplywooddensity of pu used inbackrest kg per cubicmeter< 30, >30< 40, >40< 50, >50, nathickness of pu used inbackrest mm< 30, >30< 40, >40< 50, >50, nawidth of backrest mm< 400, >400< 450, >450backrest height from theseat level> 350< 450, >450< 550, >550backrest upholsterymaterialmesh fabrics, polyester fabric, leatherette, leatherette with spacer fabric, leather, caned, moulded puarmrestarmrest typeoverhanging armrest, continuous armrest, mouldedarmrest continuously fitted with seat and back, moulded t armrest fitted with seat bottom, mouldedarmrest mounted to frame, without armrestarmrest movementadjustable, fixed, without armrestswarrantywarranty period in numberof years1, 2, 3, 4, 5 or higher year /speci cation u u /specificationname b b s s /bid requirementallowed valuesadditional specification parameters - office chair v3 32 pieces specification parameternamebid requirement allowed valuesremarksdetailed specification is included in buyer added bid specific atc. biddersshould submit declaration regarding the compliance of the specification.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; a o ; a /consignees/reporting officer and quantity5. .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1shiju v s695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, trivandrum3230steel shelving cabinets adjustable type confirming to is 3312 v4 32 pieces 5 / 15 5 5 1 2 & & % % % % ^ ^ < < % % 4 4 b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively u u /technical specifications* u / as per gem category speci cation /speci cation u u /specificationname b b s s /bid requirementallowed valuesstandards andcertificationsgoverning standardconformity to is 3312generictypes of shelving cabinetsdimensions are withoutpedestal heightsmall 1150 mm x 760 mm x 430 mm, large 1855mm x 910 mm x 480 mmavailability of drawersyes, noavailability of lockersyes, noadditional specification parameters - steel shelving cabinets adjustable type confirming to is3312 v4 32 pieces specification parameternamebid requirement allowed valuesremarksdetailed specification is included in buyer added bid specific atc. biddersshould submit declaration regarding the compliance of the specification.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; a o ; a /consignees/reporting officer and quantity5. .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1priya p695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, triavndrum3230metal beds v3 64 pieces 5 5 1 2 & & % % % % ^ ^ < < % % 4 4 b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively u u /technical specifications* u / as per gem category speci cation6 / 15 /speci cation u u /specificationname b b s s /bid requirementallowed valuesgenerictype of metal bedmetal bed, metal bed with headboard only, metal bedwith footboard only, metal bed with headboard andfootboard, metal bed with headboard, footboard andcanopysize category of metal bedsingle, double, queen size, king size, super king sizeoverall length of bed inmm1800 - 1850 mm, 1850 - 1900 mm, 1900 - 1950 mm, 1950 - 2000 mmoverall width of bed inmm750 - 900 mm 2.5 to 3 ft, 900 - 1050 mm 3 to 3.5ft, 1050 - 1200 mm 3.5 to 4 ft, 1200 - 1350 mm 4to 4.5 ft, 1350 - 1500 mm 4.5 to 5 ft, 1500 - 1650mm 5 to 5.4 ft, 1650 - 1800 mm 5.4 to 6 ft, 1800 -1950 mm 6 to 6.4 ft, 1950 - 2100 mm 6.4 to 6.9 ftoverall height of bed frominstallation level in mm150 - 200 mm, 200 - 250 mm, 250 - 300 mm, 300 -350 mm, 350 - 400 mm, 400 - 450 mm, 450 - 500mm, 500 - 550 mm, 550 - 600 mmavailability of headboardyes, noavailability of footboardyes, nometal bed framematerial of bed frameincluding legsmild steel, aluminium, wrought ironmetal bedmattress supportpaneltype of bed mattresssupporthorizontal beams only, vertical beams only, crossbeams - horizontal & vertical combomaterial of bed mattresssupport panelmild steel, aluminium, wrought ironmetal bedheadboardmaterial of bed headboardframemild steel, aluminium, wrought iron, nametal bedfootboardmaterial of bed footboardframemild steel, aluminium, wrought iron, naadditional specification parameters - metal beds v3 64 pieces specification parameternamebid requirement allowed valuesremarksdetailed specification is included in buyer added bid specific atc. biddersshould submit declaration regarding the compliance of the specification.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; a o ; a /consignees/reporting officer and quantity7 / 15 . .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1shiju v s695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, trivandrum6430special terms and conditions-version:1 effective from 25-06-2024 for category office chair v31. special terms and conditions1. the colours for the seat and back, are speci ed based on the procurement done by various buyerson gem. 2. sellers are advised to refrain from uploading any catalogue selecting image colour other than theoption chosen for the catalogue, as available in the category. any mismanagement of this will betreated seriously as per gem policies.3. in case buyer requires to buy any other colour not covered in the category, same may be speci edunder additional parameters while creating the bid. the colours mentioned in the additionalparameters by the buyer in the bid shall prevail over the colours indicated in the catalogue.4. sellers are advised to check the complete bid document while offering their prices.5 5 : : d d/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. genericbidder financial standing: the bidder should not be under liquidation, court receivership or similarproceedings, should not be bankrupt. bidder to upload undertaking to this effect with bid.3. genericbidders shall quote only those products part of service delivery in the bid which are not obsolete in themarket and has at least 7 years residual market life i.e. the offered product shall not be declared end-of-life by the oem before this period.4. certificatesbidders offer is liable to be rejected if they dont upload any of the certificates / documents sought in thebid document, atc and corrigendum if any.5. genericbidders are advised to check applicable gst on their own before quoting. buyer will not take any8 / 15 responsibility in this regards. gst reimbursement will be as per actuals or as per applicable rateswhichever is lower, subject to the maximum of quoted gst %.6. buyer added bid specific atcbuyer added text based atc clausesa. bidders are advised to quote prices as per technical specification and additional specification. bidders should not include price bid in the technical bid. the price format to be submitted along with financial bid only. if any of the price components disclosed in the technical bid, the bid will summarily be rejected and thebidder will be disqualified from further bidding process.b. bidders should submit the manufacturers authorization in attached format- a buyer uploaded atc documentc. liquidated damages:if the supplier fails to deliver or install/commission any or all the goods or fails to perform the services within the time frames incorporated in the purchase order, the purchaser shall, without prejudice to other rights and remedies available to the purchaser under the contract, deduct from the contract price, asliquidated damages, a sum equivalent to 0.5% per week of delay or part thereof on delayed supply of goods, installation, commissioning and/or services until actual delivery or performance subject to a maximum of 10 % of the contract price. once the maximum is reached purchaser may consider termination of the contract.if any delay by the supplier is maintained its contractual obligations towards delivery of goods andperformance of services shall render the supplier liable to any or all of the following sanctions:a. imposition of liquidated damages, b. forfeiture of its performance security andc. termination of the contract for defaultd. sctimst reserves the right to ask for a free demonstration of the quoted equipment/ items after giving reasonable time to the bidder at a pre-determined place acceptable to the purchaser or at a site in case of non-portable and heavy equipment for evaluating the technical compatibility as per the bidding documentspeci cations, professionalism and quality of work of the bidder for technically qualifying for opening the price bid. sctimst reserves the right to accept/ reject the bid based on the product/ site evaluation as stated above.1 2 door storage cupboards. indent no: 1 qty 32 supply & installation of 2 door cupboards the storage size should be 900w x 507d x 1950ht +/-1 mm. storage should be completely knock down construction. storage skirting should be removableand to cover integral legs and legs should be fitted with screw type leveller. storage should be made from combination of crca 0.8 mm & 0.6 mm thickness. storage door should be provided with steel hinge door. door lock should be 3-way 90 degree removable key type cam lock &locking mechanism and handle should be base aesthetically appealing, ergonomic, flush with door made from zinc alloy.9 / 15 one locker should be placed in the rh side of the storage with hinge door and 2-way cam lock with knob type handle top side full shelf should be fixed and adjustable half shelves 1 no on rh side of the storage & 2 no s on lh side of vertical partition. one number hanging rod should be provided on left half of partition below top shelf & another one on right half below locker both mounted on snap-ontype plastic brackets. storage nish should be epoxy powder coated to the thickness of 50 microns +/-10. product should be certified by bifma, greenguard, greenpro, aiota, and iaq2 cantilever chair. indent no.3 qty 32 supply &installation of non revolving chair the chair seat should be made of injection moulded in glass lled polypropylene compound which is upholstered with fabric upholstery covers and moulded polyurethane foam. the chair back should be injection moulded in glass lled polypropylene compound which is upholstered with mesh fabric seat size should be: 50 cm. d x48 cm. w back size should be: 53 cm. w x 39 cm. d the foam should be high-resilience polyurethane moulded with density 45+/-2 kg/m and hardness 16+/-2 kgf as per is: 7888 for 25% compression. chair under structure should be cantilever with powder coateddft 50 10 microns welded tubular main frame is made from 2.54 0.03 cm x 0.2 0.016cm and 1.9 0.3mm x 0.12 0.0096 cm with mild steel electric resistance welding tube. the armrest should be made of glass filled polypropylene compound andassembled over the tubular frame the chair shoes should be made of glass lled polypropylene compound with and pressed fitted with tubular frame. felt is provided below the shoes. 10 / 15 3 single bed with head and footboard. indent no.4 qty 64 supply & installation of single size metal bed. the bed size should be 2080w x 925d x 385 ht +/-1 mm. bed should be completely knock down construction with metal frame material. metal frame size should be mild steel pipe 25.4x 50.8 x 1.2 thk, mild steel pipe 19.05x 19.05 x 0.8 thk and angle 20x20x1.6 thk +/-0.1mm. bed should be provided with headboard & footboard bed nish should be epoxy powder coated to the thickness of 50 microns +/-10. product should be certi ed by bifma, green guard, green pro, aiota, and iaq additional terms and conditions1 the bidder participating in the tender should be an oem or an authorized dealer. upload manufacturer authorization: wherever authorized distributors are submitting the bid, manufacturers authorization form maf/certi cate withoem details shall also be uploaded.2 splitting up of bid items is not possible. bidder shall quote for all products mentioned in the bill of quantity. bidders o er is liable to be rejected if theydo not quote for all products mentioned in bill of quantity boq.3 bidder should upload speci cation and catalogues of the quoted products. bidder should provide the available colour options for the o ered chairs, lpsc reserves the right to choose the colours from the available options for the above items and the same will be mentioned in the p.o. 4 service escalation matrix of the bidder should be provided with o ce set up and warehouse details in kerala. registration certi cate also to be submitted as documentary evidence.5 the supplied products should be designed and tested as per bifma standards for comfort, safety, and durability.6 the bidder/oem should have manufacturing facility in india and they shall manufacture in accordance with iso 9001:2015, 14001:2015, 45001:2018 and 500o1:2018follow safety norms in accordance of ohsas7 the bidder/ oem should have green guard, aiota, iaq, green pro and griha certi cation for the o ered furniture which are in accordance with environment requirements and recognized under ministry of new and renewable energy.11 / 15 the bidder / oem themselves or through resellers, should have executed project for supply and installation / commissioning of same or

Central Government/Public Sector

TRN :34821332 | 31 Jul, 2025

Tender Value : 0

New Delhi - Delhi

Tender for gem bids for dishwashing products v2 as per is 6047 q4, glasscleaner, liquid v2 as per is 8540 q4, air freshener solidand gel q4, aluminium and aluminium alloy bare foil forfood packaging v2 as per is 15392 q3

Central Government/Public Sector

TRN :34829007 | 01 Aug, 2025

Tender Value : 1.01 Lacs

Bangalore - Karnataka

Tender for gem bids for capacitor, ,fixed ceramic disc,ac,2200 pf,250 v ac,-20 %, class y, capacitor, fixed metallized poly propylene, box type radial leads, 0.33 uf, 275v ac, ±10%, capacitor, tantalum solid electrolytic smd 10 uf , 16 v, +/- 20%, size a (3216)., capacitor,fxd.ceramic chip,22000 pf (22nf), 50v, ±10%, size 0805, capacitor,fxd.ceramic chip,22000pf (22nf), 50v, ±10%, size 0805 capacitor,ceramic chip, 0.33 uf, 10%, x7r, size 0805, 50v, 1000 uf,25vdc,20 %,high frequency,low impedance,high ripple current,105 degc,size 12.5 x 20 mm,5 mm pitch, capacitor,ceramic chip multilayer 1000pf, 50v, +10%,size 0805., chip capacitor, smd 1 uf, 50 v, ±20%, x7r 1812 size, chip capacitor, smd 1 uf, 50 v, ±20%, x7r 1812 size capacitor,fxd.aluminium electrolytic,radial.leads,470 mfd,25v,+20%, capacitor, fxd.ceramic chip, 47 nf, 50v,10%,size 0805., capacitor, fxd. tantalum, chip, 1 ufd, size 3216, 20v, +10%., capacitor, smd, 10 uf/ 50 v, 1206, ±10%

Central Government/Public Sector

TRN :34831945 | 30 Jul, 2025

Tender Value : 0

Kulgam - Jammu And Kashmir

Tender for gem bids for beakers 100ml, beakers250ml, beakers 500ml, washing bottle, test tube 15ml, boiling tube18x150, weighing machin, cork, glass tube lu, funnel, bar magnet, spring balance, slinky, glasswatch, test tube stand, wooden bard, drycell or accumulator, dropper, cover slips, overflow can, metal box, metal tubes, ohms lawapparatus, glass slab, rheostat, plug key, resistor wires nickel, 100gm, resistance box, forcep, conecting wire, sand paper, microscope, dissecting microscope, brushes, test tube brushes, filter paper, hot plate, ethanoic acid, hydrogencarbonate, lime solution red litmus, metalsznfealcu, solid sodium carbonate, calcium oxide, ferrous sulphate, copper sulphate, sodiumsulphate, barium chloride, zinc sulphate, aluminium sulphate, alum, safranin, sulphurpowder, carbon disulphide, sulphuric acid, glycerine, potassium hydroxide, phenolphthalein, spirit, distilled water, methylene blue, photopaper, drum, equaliser, led buld, epson inkcoloured, epson ink black in white, color boardmarker, color ink, canon printer ink, ceiling fan, painting brushes, brush 3 inch, white paintwaterproof, roller big, roller small, stainerblack, stainer red, stainer brown, stainer green, stainer blue, stainer yellow, stainer purple, stainer orange, odonil, phenyl, room freshener, broom big, broom small, micro fibre cloth, dustbin polythene small, colin spray

corporations/Associations/Others

TRN :34807271 | 26 Jul, 2025

Tender Value : 7.04 Lacs

Kalpakkam - Tamil Nadu

Tender for gem bids for house, germ protection liquid hand wash , floor cleaner liquid , disinfection toilet cleaner liquid , grade 1 white naphthalene balls , white phenyl concentrate , stain remover acid , grade 1 white stable bleaching powder , 100 virgin plastic bucket , 100 virgin plastic mug of 750ml capacity , 100 virgin plastic bucket of capacity 20 litre , 100 virgin plastic pedal dustbin of 15 litre capacity , round curved triangle cob web brush of nylon bristles , floor wiper of base frame of 40033 min. with aluminium handle of 1300mm min. long inserted with high grade rubber blad , glass wiper with high grade rubber blade with angular head , best quality garo-hill natural grass broom knitted with nylon wire , hard coconut fiber broomstick of 40 inch long for wet floors , heavy duty clip mop set for wiping floor , heavy duty clip fit 100 cotton threads , microfiber cloth duster , double hockey toilet cleaning brush , sink cleaning flexible brush , detergent washing powder , room air freshener with manual spray pump , air freshener solid block of 50 gram pack of mix fragrance , air freshener zipper each pouch 10 grams with instant long lasting fragrance germ protection , 100 litre foot operated waste collection bin of polypropylene pp hdpe material with top openable lid and castor wheels , plastic dust pan with sturdy handle

Central Government/Public Sector

TRN :34801264 | 18 Jul, 2025

Tender Value : 0

Darjeeling - West Bengal

Tender for gem bids for ds, puf insulated ds orl puf insulated prefab modular shelterof size 18 point 90 x 6 point 10m including 1 point 38m wideverandah all as per brief specification tmt bar fe 550grade 12mm dia tmt bar fe 550 grade 10mm dia tmtbar fe 550 grade 8mm dia binding wire annealed not lessthan 0 point 9mm dia double sleeping bunks 1900 mm x762 mm x and height 1650 mm made of 40 x 40 mmmedium grade square tube with 25 x 25 mm as per techspecs double leaf steel lockers half hanging and halfshelving will be height 1500x width 900 x depth 475mm asper tech specs pvc laminated sheet flooring 2 mm thick vitrified tiles 600x600x10 mm white cement as per techspecs water proofing compound quick setting compoundas per tech specs powder coated curtain rod colourbrown and ivory length 6 mtr curtain rod bracket colourbrown or ivory office chair with complete cushion andrubber hand rest frame made with ms hollow section pipe20mm dia size of chair 915mm x 450mm steel writingtable shall have size of 0 point 90m x 0 point 60 m andheight 0point 75m with prelaminated bhutan board top of 18mm thickness as per tech specs water dispencer of 15 ltrcapacity single phase 230 v 50 hz as per tech specs hdpearisto wheel garbage waste dust bin 120ltr capacity size920mmx480mmx550mm looking mirror 1200 mm x 600mm with 5 point 5 mm thick float mirror fixed on woodenframe and 6 mm thick plywood back support fire proofcoating paint for panel poly urethane paint top coat fireproof coating paint for wood top coat fire extinguisher ab c type portable net 2 kg capacity cylindrical withdischarge pipe and nozzle complete and suitable bucket forhanging on wall switch piano moduler type 10 amp oneway cat part no 21011 switch piano moduler type 10 amptwo way cat part no 21022 bell push moduler type 5 amps bid number gem2025b6427616 dated 08-07-2025 bid document1 82 1 1 cat part no 21044, switch piano moduler type 15 amp oneway cat part no 21066, socket 10 a modular type catpartno 21113, socket multipurpose 3 pin 10 and 3 pin 20 ampmodular type of 2 module cat part no 30828, tapeinsulation 10 mtr long, decorative type ultra slim linear ledlighting fixture with extruded polycarbonate energy efficientled tube light fitting 18 watt as per tech specs, decorativewall light fitting 10 watt made up of polycarbonate suitablefor 10 w retrofit led bulbspirl b 22 base as per tech specs, led security light as per tech specs, mirror led ligt 9 wattup and down type, elect bell ding dong, surface plasticbox suitable for moduler switches and socket of 4 module, surface plastic box suitable for moduler switches and socketof 3 module, surface plastic box suitable for modulerswitches and socket of 2 module, solid plate with baseframe suitable for surface plastic box of 4 module, solidplate with base frame suitable for surface plastic box of 3module, solid plate with base frame suitable for surfaceplastic box of 2 module, blank plate of single module, pvccasing capping 1 inch length 6 ft, pvc elbow for casingcapping of size 1inch length 6 ft, pvc tee for casingcapping of size 1 inch, ceiling rose pvc, pvc round block, steel screw full threaded 1 by 2inch 100 nos, steel screwfull threaded screw 1inch 100 nos, steel screw fullthreaded screw 1 by 4 inch 100 nos, mcb db 12 way 240volt double door complete with copper busbar, mcb 6 ampsp 240 volts c curve, mcb 20 amp 240 volt c curve sp, mcb double pole isolater 63 amp 240 volt, pvc cableinsulated aluminium conductor served with inner sheathingof pvc tape overall pvc sheathed cross sectional area 10sqmm 2 core as per tech specs, pvc 1 point 5 sqmmcopper cable single core frls with multistrand, pvc 1 point5 sqmm copper cable single core frlsmultistrandedconductor for earth wire in green colour, pvcinsulated and pvc sheathed multistranded copperconductor flexible industrial cable 1100 volts three core 1point 0 sqmm, pvc 2 point 5 sqmm copper cable singlecore frls multstanded conductor for power point, pvc 1point 0 sqmm copper cable single core frlsmultistrandedconductor for earth wire in green colour, inverter 02 kva capacity and battery combo for home officezolt 1100 sine wave as per tech specs, lc with completeset as per tech specs, elect earthing set with completeitems as per tech specs, packaged septic tank speciallydesigned for the anaerobic digestion flexible connector and550 mm capacity 2000 ltrs inlet 100 mm dia out let 100mmdia air vent 150mm dia, pre fabricated soakage pit of 2000ltrs capacity with 100mm dia swr pipe and all necessaryfittings, puf insulated water tank of 2000 ltrs capacity withinsulated lid and locking arrangements as per tech specs, water staging platform made of ms angle of size65mmx65mmx6mm for a 2000 ltrs puf insulated tank asper brief tech specs, ppr pipe 20mm dia, ppr pipe 25mm, ppr pipe 15mm dia, ppr tee 20mm, ppr tee 25mm, pprelbow 90 degree 20mm, ppr elbow 45 degree 20mm, pprelbow 25mm, ppr elbow 90 degree 25mm, ppr elbow 45degree 25mm, ppr male threaded socket 20 15mm dia, ppr female threaded socket 20 15mm dia, ppr femalethreaded elbow 20 15mm dia, ppr male threaded elbow 2015mm dia, ppr socket 20mm, ppr socket 25mm, pprunion 20mm, ppr union 25mm, ppr reducer 25x20mm, ppr reducer tee 25x20mm, bib cock cp 15mm chromiumplated suitable for 15mm ppr water supply line, stop cockbrass 20mm suitable for 20mm ppr water supply, stop //bid details2 / 82 cock cp suitable for 15mm ppr water supply line, pillor cockcp chomium plated suitable for 15mm ppr water supply line, stop cock cp 25mm suitable for 25mm ppr water supplyline, taeflon tape, float valve 25mm dia suitable for pprpipe, 25mm ppr tank connector, pvc pipe 4 inch dia 6 mtrlong heavy duty type a having 5 kg pressure oblique sqcm, pvc socket 4inch dia, pvc elbow 4 inch, pvc tee 4 inch, pvc floor trap 4 inch dia with grating 2 inch outlet, iwcstainless steel including foot rests complete, pvc flushingcistern 10 ltrs capacity with pvc connection pipe 2ft andwaste pipe 1 mtr angle and inculding all connected items, wash hand basin stainless steel of size 530mmx345mmbowl size 457 x 257 mm depth 140 mm with waste pipe andcoupling alongwith 2 nos ci bracket with screw etc, 15mmdia pillar taps cast copper alloy with capstan headschromium plated screwed down high as per brief specs, pvc connections 15mm size with ptmt nuts of length600mm long, bowl urinal stainless steel of size 465mm x355mm x 265mm with grating and union for discharge pipeand including waste pipe, looking mirror 600mm x 450mmwith 5 point 5 mm thick float mirror of selected quality glassof including pvc tray size 300 x 150mm and hangingarrangments etc, sheet glass self assembly consisting of 5point 50mm thk sheetglass 12cm wide with chrimium platedbracket guard and railing 60cm long, pvc p trap 110 x75mm, aluminium cloth peg set of 5 hooks of standard, soap dish stainless steel chromium plated complete withfittings fixture etc, hot water boiler of capacity 150 ltrshaving average performance to heats 500 ltrs of cold waterto 50 degree centigrade in max 30 40 min as per brief techspecs, brick trowel steel 305mm, plaster trowel withwooden handle, fish line min length 20m, plumb bob iron, picks axes with chisel and point endskudali 14 cp nominalweight 3 point 0 kg overall length minimum 595mm withhandle, lime brush, painting brush 100mm, hacksawframe large with blade 05 nos, vernier caliper digital type, screw guage digital type, electrician tool kit, multipurposenon slip rubber reusable gloves for scrubbingcleaningbrick work etc colour olive green black, measuringfibre glass tape 5 mtr long, industrial safety helmet, showel square nose 14 gauge blade size 310 x 245 mmshaft size 710 mm fitted with strong steel crutched woodenhandles, puf rivet machine, welding rod, galvanised ironpan mortar tasla 18 gauge 16 inch dia minimum weight 01kg, rammer earth with handle minimum weight 5 kgwithout handle, electric tile cutting machine withinterchangable blades 05 nos, form work 12mm thkplywood 2400mmx1200mm, soft wood wooden fillets sizenot exc 13sqcm for formwork, nails 50mm long, heavyduty openable props scaffolding made of ms pipe of 60 and48mm dia outer pipe od 60mm and inner pipe od 48mm of3mm wall thick as per brief tech specs, ms form workplates of any size of thickness 14 guage with two stiffenersincluding all necessary jointing arrangement nut bolt andjointing cleats etc as per brief tech specs, cable pvccopper conductor 6 sqmm two core for welding purpose, single phase 200 amp mini portable arc welding machine200 amps including all accessories as per brief tech specs, electrical sheet cutter machine with blade, electric drillmachine heavy duty 235 watt capacity with a set of drill bit6mm 4mm and 8mm each for wood and stone electricalback up with battery and charger etc, power full jig sawmachine 570 watt with 2 blades for metal cutting comboform //bid details3 / 82

Central Government/Public Sector

TRN :34780989 | 17 Jul, 2025

Tender Value : 0

Dehradun - Uttaranchal

Tender for gem bids for pick axes 2 kg, shovel round nose, spade 1 pt 4 slash 1 pt6 kg, crow bar 6 feet long, axes felling 2 kgs, pan mortor18 inch dia 18 swg, single wheel barrows 60 ltrs capacityshall withstand a proof load of 200 kgs of wheel materialmild steel solid or cushioned rubber tyre, double wheelbarrows 75 ltrs shall withstand a proof load of 250 kgs ofwheel material steel with solid or cushioned rubber tyre, charpoy gi pipe frame size of pipe 2 inch with ply size iso12 mm top, mattress 6 feet x 3 feet x 5 inch make kurlon, sleepwall, duroflex, kerosene heat king bukhari, forheating, 3000 w type electric room heater tank capacity10 lcompatible power3000 w materialmild steel withcomplete set, steel almirah double door, number of shelves5 heet round and flats conforming to grade e250 of is2062, size 78 inch x36 inch x 22 inch make godrej, nilkamal, radzy as per atc specification, steel almirah double door, number of shelves 3 heet round and flats conforming tograde e250 of is2062, size 48 inch x 36 inch x18 inch makegodrej, nilkamal, radzy as per atc specification, officetable with three drawer and sunmica top size 4 feet x2 pt 5feet make godraj, nilkamal, plastic chair with arm makenilkamal, cello, superme, gas stove double burnnercooktop make prestige, milton, bajaj, usha, kerosene pumpstove 04 number bunner iron made side tank single burner, degchi alum 08 inch with lid, kadhai alum 10 inch slash12 inch with lid, kadhai alum size 20 inch to 24 inch, karchi alum 18 inch to 20 inch, bergner odin cast iron rotitaw, heavy big knife 3 wood handle black metal breadth 0pt 5 cm height 35pt 5 cm length 0 pt 5 cm traditional andhand made multipurpose iron knife, wood chop carvedfrom single block of acacia wood reversible chakla belanchopping board no dyes or polish natural finish 9 pt 5 inch, hotcase 3 container make cello, milton, superme, plasticbucket 15 ltr make cello, milton, superme, mug plastic 1ltr make cello, milton, superme, stainless steel straightkatori bowl with round border, 100 ml, pressure cooker 5ltr cap make hawking, prestige, led tube light 4ft long 36w with complete set make syska, bajaj, philips, hdpe slashdgof barrels

Central Government/Public Sector

TRN :34768577 | 02 Aug, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for gem bids for logic controller interface pcb by sdd approved, gearsensor gear sensor pcb specification inputs active lo 8 nos outputs 8 nos through 15 pin d connectors, power cable 2 core power cable type yy 1 sq mm diastrength 8 1 kg, 3 core power cable h07 rnf 1 5 sqmmdia isi standard, 3 core power cable h07 rnf 2 5 sq mmdia isi standard, signal cable 10 core cableunshielded type yy 6 3mm dia strength 8 1 kg , 15 corecable gear sensor pcb to interface pcb with 15 pin maleand female d sub end connectors 1m length , 25 corecable unshielded screened 6 3mm dia, connector 2 pinconnector 2 pin wego connector plug male and femalesockets pair 0 138inch 3 5 mm pitch 180degree, 3 pinconnector 3 pin wego connector plug male and femalesockets pair 0 138inch 3 5 mm pitch 180 degree 10amps, connector 4 pin connector 4 pin wego connectorplug male and female sockets pair 0 138inch 3 5 mmpitch 180degree, 10 pin connector 10 pin wego connectorplug male and female sockets pair 0 138inch 5 mm pitch 180 degree 16 amps, 16 pin connector 16 pin wegoconnector plug male and female sockets pair 0 138inch 5mm pitch 180 degree 16 amps, 15 pin automobileconnector panel receptable 15 way , 9 pin d shell femaleconnector complete with dust cover and strain relief ittd sheel connector isi standard , 9 pin d sub maleconnector complete with dust cover and strain relief ittd sheel connector isi standard , 15 pin d shell femaleconnector complete with dust cover and strain relief ittd sheel connector isi standard , 25 pin d shell connectorfemale complete with dust cover and strain relief ittd sheel connector isi standard , connector 25 pin dshell connector male complete with dust cover and strainrelief itt d sheel connector isi standard, audiocable audio cable 10 m length flexible audio cablenominal o by d 1503a 3 68mm nominal capacitancebetween, ac plug top 6 amps 3 pin plug top 6 amps isistandard , ac plug top 15amps 3 pin plug top 15amps isi standard , binding wire size 2061 02 1 by 26 92 mtrs roll , power cord computer power cord 230 vac 6 a 3 mtr length h07 rnf 1 5 sq mm dia isistandard , connector combination switch als automobileend connectors automobile end connector for alscombination switch, ignition switch als automobile endconnectors auto connector for als ignition switch bothmale and female pair , lan cable lan cable cat 5e withrj 45 end connectors 15 m length duplex cable cat 5eutp cat 5e utp , lan cable cat 5e with rj 45 endconnectors 2 m length duplex cable cat 5e utp cat 5eutp nominal od, switch microswitch push button type 3way 10 mm dia , lt wire premium quality lt wire fordashboard wiring 2mm dia lt wire of red black blue green and yellow , proximity switch proximity switchp type inductive p type 3core wire length 2 5 mtrs 18mm dia 6 36 volt, spike buster spike buster socket board6 sockets 15 a 6 sockets 15 a 15 by 5a multipinsocket card length 5 mtrs, spike buster socket board 6sockets 6 a 6 sockets 6 a card length 5 mtrs socketmaterial bross heavy duty , usb extender cable usbextender cable 10 mts usb extender cable usb 2 0 male to female supports 480 mbps , vga cable vga cablewith 15 pin male to female end connectors 20 m length high performs rgb db15 de15 hd 15, hdmi cable hdmi cable 2m length supporting resolution 800x600 1024x768 1080p full hd 1092x1200 wxga , //bid details2 / 100 hdmi cable 20m length supporting resolution 800x600 1024x768 1080p full hd 1092x1200 wxga , cable ties cable ties and tie bases 50mm packet of 100 as per drawing standard cabel ties white nylon with, cable ties and tie bases 100mm packet of 100 as perdrawing standard cabel ties white nylon with anon release, cable zip cable zip tie mounts cable zip tiemounts self adhesive tie mount for wire alignment size1inch x 1inch color black, spiral pipe spiral pipe 1 5inchdia flexible conduct mtrls nylon pa6 thread pg36 temp 40 deg to 120 deg , spiral pipe 1inch dia flexibleconduct mtrls nylon pa6 thread pg36 temp 40 degto 120 deg , pvc channal pvc channal pvc flexibleconduct 1 x 3 1 5 mtr length, instrument panel alsmk iv original instrument panel complete teflonwiring modified als mk iv, instrument panelbulbs instrument panel bulbs operating voltage2 amps 12v dc , switch toggle switches toggle switch 3way 230 volt ac, sleeves sleevesassorted 1 0mm 1 5mm 2mm 4mm 5mm 8mm 10mm 15mm 20mm , heat sink sleeve 1mm 1 5mm 2mm 4 mm and 8 mm each 02 mtrs, connector ecom connector for ups connection 6amps ecom connector 5 amps male and female pair , ecom connector for ups connection 15 amps ecomconnector 15 amps male and female pair , universaladaptor universal adaptor for 3 pin plug 6 apms socketmaterial bross isi standard , mounting bracket mountingbracket for speaker as per 515 abw drawing no a4 515als 57817 , mounting plate for plc as per 515 abwdrawing no a3 515 als 57822 , mounting bracket for spikebuster as per 515 abw drawing no a4 515 als 57823, mounting bracket main gear box als as per 515 abwdrawing no a3 515 als 40805 , holding bracket for 7inchlcd monitor as per 515 abw drawing no a3 515 als57826 , mounting bracket for smps as per 515 abwdrawing no a4 515 als 57817 , steering logitech g 29mounting assembly steering logitech mounting assy asper 515 abw drawing no a2 515, coupling aluminiumflanze coupling stearing wheel with logitech g 29 15 cmdia 6 cm length solid aluminium, gear box modified maingear box of als 6 1 gear 6 1 gear with shiftingmechanism shifting lever and lever knob , projectorstand mounting stand video projector projector mountingstand rotating height adjustable extension locking, projection screen back projection screen projectionscreen projection from backside of the screen, screenframe parabolic projection adjustable frame parabolicprojection adjustable stand with 11 5feetx15feetx4feet, mounting rope projector screen mounting rope projectorscreen mounting rope nylon rope 8mm dia as per isostandard , instructor station instructor station als 1 2 mswith black powder coating 4xinstrument cooling fans , chair instructor chair isi standard , universal joint universal joint als mk iv assy with coupling male andfemale for steering assy as per 515 abw drawing no a3515 als 57824 , fasteners set of assorted fastenersals cheese head slotted screw size m6 by 40 long with nutand double washer, mfg lable manufacturer s lableplate 515 army base wksp manufacturer plate as per 515abw drawing no a3 515, u bolt u bolt with couplingbracket u bolt for coupling als mk iv cabin intermediteframe with 6 dof hydrolic upper, anchor bolt anchorbolt size 20 mm dia x 12inch as per 515 abw drawing , //bid details3 / 100 frame intermediate frame intermediate frame couplethe als mk iv driver cabin to 6 dof hydrolic motionplotform, dvr cabin original dvr cabin ashok leylandstallion mk iv ashok leyland stallion mk iv cabinoriginal, hydraulic platform 6 degree of freedomhydraulic motion platform with hydraulic power panel andhydraulic plc panel 1 , hydraulic fluid hydraulicoil hydraulic fluid grade sho 68, power cable 3 phase 4core power cable 3phase with earthing red yellow greenand black 70 sq mm 170 amps, allen key allen key set of8 allen key 2 3 4 5 6 7 8 9 set of 8 isi standard, screw driver set screw driver set of five isi brand, cuttingplier cutting plier 6inch isi standard , spanneropen jaw spanner open jaw set of 8 spanner open jaw10 by 11 to 20 by 21 isi standard 6 to 22 set , spanner adjustable spanner 24inch isi standard , bubblesheet 2 mtr width , corrugated sheet 2 mtr width , cotton waste cotton waste , grease commercial grade , hessian cloth 2mtr width , insulation tape wondertape 10 mtr roll pvc , packing tape adhesive packingtape 50mm width 10 mtrs std roll, paint paint black andoliver green spray container 500 gms quick dryinglacquer spray 100percentage acrylic automobiles finishes, ldpe plastic rolls ldpe plastic rolls pattern plain ldpeplastic rolls pattern plain transparency 50percentage packing type, silica gel transparent silicagel transparent silica gel bag particle size 200 425mesh industrial use isi standard , wood packingboxes chir wood packing boxes by crates wooden boxesrequired for packing one set of, rubber mat rubber mat for6 dof hydrolic base frame 6 x 6 15mm thickness isistandard , documents technical manual as per 515 softcopy approx 250 pages , user hand book as per 515 softcopy approx 250 pages , log book as per 515 soft copy approx 50 pages cgi and iis pc with following configuration.equivalent orhigher. motherboard asus/intel motherboard withfollowing config: - intel core i7 9700k @3.60ghz. processorsupported. -two pci express -three pci slots -support forddr4 lga 1151 / 1333 /1066 mhz dimms support.-1066/800/533 mhz system bus for up to 16 gb of systemmemory, 8channel. up to 6 usb 2.0 port. with two portscompatible with esata dongles, one serial port header, com port for rs-232.communication. equivalent orhigher., processor intel core i7 9700k @3.60ghzsocket:1151lga tech:14nm cache: l1 data: 8x32bytes l1inst 8x32bytes l2 8x256kbytes l3 12mbytes core:8thread:8 or equivalent or higher., ram dual-channelddr4 1866o.c/1333/1066 mhz 8gb, hdd 2.5 hdd driveinterface sata 6gb/s, cache 8mb, capacity 1tb, area densityavg 329gb/in2, guaranteed sectors 488, 397, 168, readspeed 560 mb p/s write speed 530 mb p/s., ssd 256 gb orequivalent or higher, dvd drive. dvd drive internal satadrive type dvdrw, drive height 42mm, interface serial-ata, drive mounting horizontal/vertical, buffer memory 2mbautomatic ball balancing system : a.b.s dvd-r write22x, read 16x. compartable to windows 7., smps smps750watt connectror type atx 12v, v2-52 equivalent orhigher., keyboard with mouse wireless combo wirelesskeyboard with mouse bluetooth support mk-235. 104 keys, adjustable tilt legs, width -15cms, , advanced 2.4ghz, operating distance 10 mtrs, with 2xaaabatterys.equivalent or higher., monitor 24 leddisplay.aspect ratio - 16:9.response time - 5ms, resolution - 1920 x 1080@60hz support full hd 60 hz, fhd1080p.equivalent or higher., cabinet computers chassis. //bid details4 / 100 industrial type industrial type, 19 4u rack computerschassis. ipc -611 bp bare chassis., sound system 5:1channel sound system speaker 5 :1. approx - speakerpower: 25w rms per channel 4channel. sub woofer power17w rms. frequency response: 40 hz ~ 20 khz, s/n ration: 80db, distortion :1 %, satelite speaker:lxwxh7cmx8cmx18.3cm. sub woofer:19cmx19cmx19cm. wiredremote control :2cmx6cmx3cm. power 12v ac 2.9ampadopter.volume control with on/off switch.audio cable fromcomputer to sub woofer.equivalent or higher., ups ups 5kva on line output power capacity 5000 va max outputvoltage 230v. efficiency at full load 92%. distortion lessthan 3% output frequency 50/60 hz +/- 3 hz. crest factor 3: 1 waveform type sine wave output connections 8 iec320 c13 2 iec 320 c19 6 iec auto sensing inputvoltage range for main 160 - 280v powerchute personaledition v2.0 with power card. with 3 pin indian sockets min30 min backup.equivalent or higher, isi standard., ethernetswitch hub 8-port ethernet switch hub 8 port 100mbpsswitch with: a 8 100mbps nway auto ports b ieee 802.3and ieee 802.3u standards supported auto 100dual-speedport upto 200mbps isi standard., kvm switch kvm switch1:4 4 port usb kvm switch 1:4 .one usb consolecontrols 4 computers. computer & monitor selectionindependently via front panel pushbuttons and hotkeys.support superior video quality up to 1920x1440, ddc28.key bd and mouse cablesmoulded separately 3 mtrs eachwith adapter, hdmi splitter 4 port 1 x 4 hdmi splitter 4ksupport connector type - hdmi cable type - hdmi numberof ports-04 350 mhz bandwith, printer. laser printer. printerblack, print speed up to 14 ppm, normal, a4 speedspecification per industry standard testing methods.memory, 2 mb embedded in sip package, 16k bit nv-ram, processor speed 266 mhz, print quality black best, up to600 x 600 dpi 1200 dpi effective output; print technology, laser duty cycle monthly, a4, up to 5000 pages. isistandard., dvd blank. dvd blank with jewelcase. recordable dvd 4.7 gb, 120 minuts with jewel case, pci serial card pci card 2xserial port supports pci irqsharing-saves valuable resources for other expansion card.easy plug & play installation automatically selects irq & i/oaddress. supports 32/64-bit pci bus, pci specification 2.1built- in 16c550 compatible uart with 16 byte transmit-receive fifo, driving force racing wheel force feedback &game wheel logitech g29 driving force racing wheel withshifter module, gas, brake, and clutch pedals, powersupply, software cd-rom, floor padals. ps5, ps4, ps3/pc., converters. dp to hdmi converter supports videoresolutions up to 3840x2160 4k support anduncompressed digital 7.1, 5.1 or 2 audio channels. 5 mtslength, converters hdmi to vga converter pc hdmi & dpconverter with i/p vga to o/p svga, vga, tv & videoconverter, display graphics accelerator card.. high endgraphics card with 4gb gddr5x ram with min 2 hdmioutputs, chipset n-vidia 800mhz engine clock.output, 1250mhz memory clock 5.0 gbps gddr5; 160gb/s memory bandwidth maximum; 88 texture units;high speed 256-bit gddr5 memory interface; pci express3.1 x16 bus interface; full directx 11 support; shadermodel 5.0; compression; opengl 4.1 support; upto 24xmulti-sample and super-sample anti-aliasing ; adaptive, morphological & 3d display/glasses support; stereoscopic3d gaming; 3rd party stereoscopic 3d middleware swsupport; dual/triple/quad-gpu scaling; software support for //bid details5 / 100 windows 10, video projector. lcd projector wuxga type1920x1200, 5500 ansi lumens, short throw lens withgeometry correction, contrast ratio : 10000:1., lcdmonitor screen size 7 diagonal lcd monitor screen size 7diagonal, physical resolution 800 x 480, supportedresolution 640 x 480 to 1600 x 1200, pixel pitch 0.1905 x0.1905 mm, supported refresh rate 60 - 75 hz, operatingvoltage 12 v dc, anti-glare coating, on screen displaycontrol, xenarc 700 series, operating system. microsoftwindows-10 windows 10 professional oem pack, application software. ms office. ms office 2019. consistsms access., programmable logic controller. plc for alsprogrammable logic controller interface pcb / sddapproved - communicates between the cgi computer andexternal real time devices through the serial port, specification : 8 bit micro controller cy8c 366 with01xmaster card and 02xslave card. operating voltage :12dc, digital inputs : 80, in 4x25 pin d-shall connector.digital outputs: 20, in 1x25 pin d-shell connector. analoginputs: 08, in 2x 15 pin d-shell analog outputs:04, ports:02xports additional for stepper motor, display panel: 16x02lcd, display panel 8 segmentg. provision for programmingthe microcontroller. serial and socket communciationfacility. as per sample, gear sensor. gear sensorpcb. specification : inputs: active lo, 8 nos, outputs : 8 nos, through 15 pin d connectors, 811c, as per drg no a4 515tata/mmj/mgs 37699., power cable. 2 core powercable. type yy.1 sq mm dia strength 8.1 kg, 3 core powercable. h07-rnf-1.5 sqmm dia isi standard, 3 core powercable. h07-rnf-2.5 sq mm dia isi standard, signalcable. 10 core cable unshielded. type yy 6.3mm diastrength 8.1 kg., 15-core cable gear sensor pcb tointerface pcb with 15-pin male & female d-sub endconnectors 1m length cable : type yy 6.3mm diastrength 8.1 kg connectors :itt d-sheel connector, as per515 circuit diagram., 25 core cable unshielded. screened6.3mm dia, connector. 2 pin connector. 2 pin wegoconnector plug male and female sockets pair, 0.138 3.5mm pitch 180 degree. 10 amps, 300 volts. color gray, housing material nylon 6/6. insulation hight 13.40 mm.contact material copper alloy. 14-28 awg, part no 2946-734-108 nd.isi standard. with circular timble pins., 3 pinconnector. 3 pin wego connector plug male and femalesockets pair, 0.138 3.5 mm pitch 180 degree. 10 amps, 300 volts. color gray, housing material nylon 6/6. insulationhight 13.40 mm. contact material copper alloy. 14-28 awg, part no 2946-734-108 nd.isi standard. with circular timblepins., connector. 4 pin connector. 4 pin wego connectorplug male and female sockets pair, 0.138 3.5 mm pitch180 degree. 10 amps, 300 volts. color gray, housingmaterial nylon 6/6. insulation hight 13.40 mm. contactmaterial copper alloy. 14-28 awg, part no 2946-231-105nd.isi standard. with circular timble pins., 10 pinconnector 10 pin wego connector plug male and femalesockets pair, 0.138 5 mm pitch 180 degree. 16 amps, 300volts. color gray, housing material nylon 6/6. insulationhight 13.40 mm. contact material copper alloy. 14-28 awg, part no 2946-734-108 nd.isi standard. with circular timblepins., 16 pin connector 16 pin wego connector plug maleand female sockets pair, 0.138 5 mm pitch 180 degree.16 amps, 300 volts. color gray, housing material nylon 6/6.insulation hight 13.40 mm. contact material copper alloy.14-28 awg, part no 2946-231-108 nd.isi standard. withcircular timble pins., 15 pin automobile connector panel

Central Government/Public Sector

TRN :34841092 | 25 Jul, 2025

Tender Value : 0

Shimoga - Karnataka

Tender for gem bids for alumino - ferric (v2) conforming to is 299 (q3)

Related Searched Keywords : solid alum

List of solid-alum Tenders

Tender for gem bids for dishwashing products v2 as per is 6047 q4, glasscleaner, liquid v2 as per is 8540 q4, air freshener solidand gel q4, aluminium and aluminium alloy bare foil forfood packaging v2 as per is 15392 q3

Tender for gem bids for alumino - ferric (v2) conforming to is 299 (q3)

Get solid alum Tender Alert...

Related Searched Keywords : solid alum

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us