Filters

List of socket-set Tenders

List of latest socket-set Tenders in Indian Tenders. Click on any socket-set Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for socket-set Tenders.

All-Tenders (79)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

Central Government/Public Sector

TRN :35764838 | 11 Nov, 2025

Tender Value : 4.31 Lacs

Panaji - Goa

Tender for gem bids for plain copier paper v3 isi marked to is 14490 q4 tonercartridges ink cartridges consumables for printers q2 pen uni ball blue eye fine ub 157 roller ball pen waterbased pigment ink stainless steel tip the uni flow systemunique window pen uni ball red eye fine ub 157 roller ballpen water based pigment ink stainless steel tip the uni flowsystem unique window pen uni ball green eye fine ub 157roller ball pen water based pigment ink stainless steel tipthe uni flow system unique window pen reynolds trimaxblue 05 tip pilot v7 07 mm fine tip blue ball pen penball montex and butter flow blue pen ball montex andbutter flow black pen ball montex and butter flow red pint type 100 nos pin stainless steel marker black permanentpen marker pen black permanent ohp cd marker luxorblack file cover duly printed with mes logo andorganisation name best quality as per office sample filecover white plain best quality as per office sample filecover white duly printed with mes logo and organisationname best quality as per office sample attendanceregister 100 pages pencil containing 10 nos in each pktapsara platinum extra dark for good handwriting longpoint sharpner non dust erraser small size apsara fevistick 25 gms flag 03 coloured paper oddy u pin uclip coloured plastic coated 50 nos in each pkt pokerwooden handle make national hd 45 all metal staplerstandard stapler with quick loading mechanism stapler10 no stapler pin 26 oblic 6 large kangro stapler pin no10 kangro paper cutter apsara nataraj handy cuttertough steel construction anti-rust coated bladesergonomic design smooth cutting anti-lock device white paper weight transparant coloured superior quality crystalacrylic highlighter marker pen containing set of 5 nossuperior quality tag 8 inch long superior quality consisting bid number gem2025b6715603 dated 31-10-2025 bid document1 76 1 1 of 100 tag in each bdl multicolur small, cotton file tag 22inch long superior quality consisting of 100 tag in each bdl, fevicol 200 gms bottle, whitner pen correction penbranded and superior quality, tape coloured halfinchx50mtr long red blue geen, tape brown 1 inchx65 mtrlong containing 25mm superior branded quality with bestadhesive, tape brown 2 inchx65 mtr long containing 25mmsuperior branded quality with best adhesive, tapetransparent half inchx65 mtr long point 7mm superiorbranded quality with best adhesive, tape transparent 1inchx65 mtr long 24mm superior branded quality with bestadhesive, tape transparent 2 inchx65 mtr long 24mmsuperior branded quality with best adhesive, dak pad folderblue leather superior quality for ge as per office sampleduly printed mes logo and organisation name, sketch penset different colors containing 12 pcs each pkt best qualityfor coloring sketching writing underlining and washableodorless non toxic fiber tip ink with ventilated safety cap, binder clip 25 mm containing 12 clip in each pkt superiorbrand quality, binder clip 32 mm containing 12 clip in eachpkt superior brand quality, binder clip 51mm containing 12clip in each pkt superior brand quality, scale plastic 12 inchlong superior quality, scale steel 12 inch long superiorquality, self stick pad small yellow repositional notes withbest quality adhesive for reposition of stick 75 x 75 mm 100sheet, envelope light green unlined cloth 16 inchx12 inch100 pcs per pkt, envelope light green as per specification, envelope light green unlined cloth 11 inch by 05inch pkt of200 pcs, toilet brush with handle best quality, pin cushionbox with magnetic top, do pad a4 size containing 100sheets on bond paper as per office sample, punchingmachine kores two holes, scissor large size 200mm goodquality, note pad dairy printed mes logo with office nameeach page having mes logo as per office sample size h22cm by w 13 point 5cm with spiral binding 150 pages 75gsm, wall clock best quality as per office ajanta quartz, white board marker blue good quality, white board markerblack good quality upto 2 point 5mm line width, dustercloth as per sample, brown register cover big size 10 mtr80 gsm 38 cm, scrubber scrotch brite, carbon paper packof 100 sheets, km card as per sample, pencil cell 1 point5v size aa duracell, pencil cell 1 point 5v size aaa duracell, tea cup set with saucer set of 6 bone china, harpic toiletcleaner 1 ltr, dettol liquid 1 ltr good quality 675 ml handwash refill, sutli good quality 50 mtr roll, room freshner224ml, colin glass cleaner 500 ml, phenyle 1 ltr goodquality, mop with handle good quality, rubber glovesgood quality, borosil 350ml set of 6 pcs radius visiontransparent drinking glass borosilicate glass tumblers forwater cold drinks juice flame proof microwave anddishwasher safe for daily use and gifting, godrej aer maticrefill automatic room fresheners violet valley bloom 2200sprays guaranteed lasts up to 60 days 225ml, extentioncord 6a 250v05 socket 03 mtr, hard broom sweepinggood quality, fool zaru good quality, black hit 400ml, good knight gold flash liquid refills 45ml each, jk papergreen paper ledger paper 8 point 5 by 14 inches 500sheets 80 gsm 1 ream, 180 gsm a4 size glossy photopaper as per sample specification, calculator 12 digit, register 300 pages, register 400 pages, pedal dustbinsteel 7 ltr cap with cover with lead without lead, transparent sheet roll 50 m long 3ft wide double, stamppad med size, vim bar 200 gm, water bottler 1 ltr steelhot and cold 24 hour, tissue paper packet 100 pcs per pkt, //bid details2 / 76 name plateas per sample specificaiton, taking downappointment board and refix with 23 nos as perspecification, door curtain 7 ft long for ge office as perspecification, sofa set cushion 1 ft by 1 ft, nepthelin ball100 gm pkt, pen stand as per sample, wash basecleaning brush, customized paper weight as per sampleacylic with mes logo and office name 2 inch by 2 inch, metal mesh 04 tear document tray desk organiser for geoffice as per sample, distil water for invertor, plantpruming secateurs with pvc grip steel handle 225mm, gardning hand tool kit cultivator trowel bent scroper 3inch blade set of three items, ten ltr plastic greenwatering can for gardening purpose, bathroom freshnerassortted pack of 05 zipper gel lastr upto 30 days eachbox having 05 pkt, jk bond paper for omr sheet 80 gsm500 paper ream, prb register 100 pages a4 size 75 gsmhard board binding with printing as per sample, log bookregister 100 pages a4 size 75 gsm hard board binding withprinting as per sample, car diary register 100 pages a4size 75 gsm hard board binding with printing as per samplepen uni ball blue eye fine ub 157 roller ball pen waterbased pigment ink stainless steel tip the uni flow systemunique window, pen uni ball red eye fine ub 157 roller ballpen water based pigment ink stainless steel tip the uni flowsystem unique window, pen uni ball green eye fine ub 157roller ball pen water based pigment ink stainless steel tipthe uni flow system unique window, pen reynolds trimaxblue 0.5 tip, pilot v7 0.7 mm fine tip blue ball pen, pen ballmontex and butter flow blue, pen ball montex and butterflow black, pen ball montex and butter flow red, pin t type100 nos pin stainless steel, marker black permanent pen, marker pen black permanent ohp cd marker luxor black, file cover duly printed with mes logo and organisation namebest quality as per office sample, file cover white plain bestquality as per office sample, file cover white duly printedwith mes logo and organisation name best quality as peroffice sample, attendance register 100 pages, pencilcontaining 10 nos in each pkt apsara platinum extra darkfor good handwriting, long point sharpner, non dusterraser small size apsara, fevistick 25 gms, flag 03coloured paper oddy, u pin/u clip coloured plastic coated50 nos in each pkt, poker wooden handle make national, hd-45 all metal stapler | standard stapler with quickloading mechanism, stapler 10 no, stapler pin 26 oblic 6large kangro, stapler pin no 10 kangro, paper cutterapsara, nataraj handy cutter, tough steel construction, anti-rust coated blades, ergonomic design, smooth cutting, anti-lock device, white, paper weight transparant colouredsuperior quality crystal acrylic, highlighter marker pencontaining set of 5 nos superior quality, tag 8 inch longsuperior quality consisting of 100 tag in each bdl multicolursmall, cotton file tag 22 inch long superior qualityconsisting of 100 tag in each bdl, fevicol 200 gms bottle, whitner pen correction pen branded and superior quality, tape coloured half inchx50mtr long red blue geen, tapebrown 1 inchx65 mtr long containing 25mm superiorbranded quality with best adhesive, tape brown 2 inchx65mtr long containing 25mm superior branded quality withbest adhesive, tape transparent half inchx65 mtr long point7mm superior branded quality with best adhesive, tapetransparent 1 inchx65 mtr long 24mm superior brandedquality with best adhesive, tape transparent 2 inchx65 mtrlong 24mm superior branded quality with best adhesive, dak pad folder blue leather superior quality for ge as peroffice sample duly printed mes logo and organisation name

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

State Government

TRN :35766126 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Dausa - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Central Government/Public Sector

TRN :35768434 | 11 Nov, 2025

Tender Value : 0

Jammu - Jammu And Kashmir

Tender for gem bids for cordless brushless reversible impact wrench, headlamprechargeable 1w led, scraping hose removal puller, magnetic pick up tools, socket set 8 to 32 mm, cuttingplier 8 inch, glass cutter, cushion grip screw driver set, cutting plier, synthetic flat tip paint brush, corded paintspray gun, allen key set black, paint spray electric

Central Government/Public Sector

TRN :35769124 | 11 Nov, 2025

Tender Value : 0

Udhampur - Jammu And Kashmir

Tender for gem bids for bill, scale, socket, b cupramanium, drafting set, roll canvas

Central Government/Public Sector

TRN :35769369 | 12 Nov, 2025

Tender Value : 0

Budgam - Jammu And Kashmir

Tender for gem bids for t handle wrench spanner set 08, 09, 10, 11, 12, 13, 14 and17 mm for b vehicle section, adjustable wrench spannerset for b vehicle section, adjustable oil filter wrench forb vehicle section, cordless impact wrench bosch for bvehicle section, zero degree rachet handle for b vehiclesection, socket set stanley for ee mechanic section, screw driver set for ee mechanic section, battery capacitytester elak for electric section, regulator tester vegasfor electric section, mini socket set stanley for electricsection, welding rod holder for welding section

Central Government/Public Sector

TRN :35769754 | 12 Nov, 2025

Tender Value : 0

Mumbai - Maharashtra

Tender for gem bids for piston, piston assy, piston ring set, sleeve cylinder, injectornozzle, fuel guage, mtg pad, tie rod end set, completegasket set, benjo washer, benjo bolt, fuel pipe 1.2 ft, fuel pipe 1.5 mtr, fuel pipe over flow 4 hole, fuel overflow rail type pipe, temp guageassy, oil pressure guage, blower bearing small, blower bearing big, cam shaft bush, oil filter, fuel filter primary secondary, inlet exhustmanifold stud, inlet exhust manifold nut, canopy mtg nut, canopy mtg bolt, crank seal, coupling, connecting rodcell, main bearing cell, push tube o ring, canopy doorlocking pin with nut, coupling nut bolt 24 mm, decompressor lever mtg bolt, nut 10 mm 1.5 inch, anabond tube, stopper cable assy, valve set, valve guideset, valve seat set, valve seal, feed pump assy, speedadjuster assy, nut bolt 13mm, crank shaft bearing, thrustwasher, digital display meter, selector switch, start pushbutton, main socket, led bulb 24 volt, dc on off switch, toggle switch, insulation tape, sleeve 6mm, sleeve 2mm, wire 4mm, wire 1.5, electronic bty charger, avr, cableracks, identification plate, wire marker, canopy light, zipper cable /bid number: gem/2025/b/6848508* /dated: 01-11-2025 & & / bid document1 / 42

Central Government/Public Sector

TRN :35756939 | 08 Nov, 2025

Tender Value : 30.00 Lacs

Hisar - Haryana

Tender for gem bids for misc, bid number gem2025b6816332 dated 29-10-2025 bid document1 71 1 1 non - modular piano type domestic electrical switches asper is 3854 q3, piano type non modular domesticelectrical sockets - is 1293 q3, electrical plugs v2 isimarked to is 1293 q2, bayonet lampholders v2 isimarked to is 1258 q2, led luminaire recessedluminaire v3 conforming to is 10322 part 5/section 2q3, elecric bells and accessories as per is 2268 q3, molded case circuit breakers mccb as per is / iec 60947q3, capacitor 4 mfd, fan capacitor 4 mfd, fan capaictor3.15 mfd, led 5 or 6 watt surface lumiinaire, led 9 wattsurface light, cpvc brass tee 15mm, cpvc coupler 16mmnominal dia, cpvc elbow 16mm, cpvc end plug 16mmnominal dia, cpvc female threaded adapter, cpvc mta16mm nominal dia, cpvc pipe 16mm nominal dia, cpvcpipe 20mm normal dia, cpvc solvent 100 gm pkt, cpvctee 20mm, cpvc union 16mm nominal dia, chlorpyriphosaldrene 20 percent, circular saw blade for wood cuttersize 4 inch, emery paper 100 nos for wood, emery paper120 nos for wood, emery paper 60 nos for wood, emerypaper 80 nos for wood, fevicol marine 04 kgs container, french polish 1 ltr pack, gypsum screw full thread 32 x 8, gypsum screw full thread 35 x 8, gypsum screw fullthread 38 x 8, gypsum screw full thread 45 x 8, gypsumscrew full thread 50 x 8, nail wire 1.5 inch 14 no, nailwire 100mm, nail wire 2.5 inch 12 no, nail wire 3 inch, nail wire 30mm x 2mm, nail wire 4 inch 10 no, nail wire40mm x 2mm, nail wire 5 inch 10 no, nail wire 6 inch, painting brush 30 mm, pidilite termite killer woodpreservative spray 500 ml, pidilite zorrik 88 rust removalspray can 311 ml, ply wood bwr size 7x3 fit 12 mm thick, prelaminated mdf board 18 mm thick size-2440mmx1830 mm, pvc seat and back for chair varandah, screw machine 20 mm, seat and back set for chair cbsteel with arms, seat and back set for chair cb steelwithout arms, stainless steel round cabinet knob withattched screw for drawer, stainless steel screw full thread20 x 6 mm, stainless steel screw full thread 35 x 8, stainless steel screw full thread 45 x 8, stainless steelscrew full thread 50 x 8, stainless steel screw full thread60 x 10, stainless steel telescopic channels for tabledrawers size18 inch, stainless steel telescopic channelsfor table drawers size10 inch, teak ply bwr 4 mm thicksize 8 x 4 fit, teak wood beading 12 mm width length 7 fit, teak wood beading 18 mm x 6 mm each 6 ft long, teakwood beading 25 mm x 6 mm length 7 fit, teak woodbeading 35 mm x 8 mm length 7 fit, teak wood beading 45mm x 8 mm length 7 fit, telescopic channels for tabledrawers size12inch, touch wood polish in 4 ltr pack, turpentine oil, varnish gold in 1 ltr pack, wood crack filler //bid details2 / 71

Central Government/Public Sector

TRN :35757520 | 20 Nov, 2025

Tender Value : 0

Lower Subansiri - Arunachal Pradesh

Tender for gem bids for 20 mm cpvc 45 degree elbow , cp 2 in 1 bib cock 15mm , cp bib cock 15 mm , m seal 100 gram , screw 35 by 8 , screw 55 mm , screw 75 mm , pvc gitti 3 inch per packet 100 pc , pvc gitti 2 inch per packet 100 pc , pvc gitti 1.5 inch per packet 100 pc , 40 mm cpvc pipe clamp , cable clip 25 mm clamp quantity per pkt 100 , 6 inch chain wrench , 50 mm gi union , 50 mm gi socket , 50 mm gi 90 degree elbow , 50 mm gi gate valve , 18 inch pipe wrench , 14 inch pipe wrench , monkeypluse , screw driver set , akar tubular box spanner set , 1 kg hammer , 24 inch pipe wrench , wall drill bit 6 mm , wall drill bit 8 mm , 75 by110 pvc r socket , 75 mm pvc pipe , 75 mm pvc clamp , wall cutting blade 4 inch , iron cutting blade 4 inch , waste fittings for size 32 mm for wash basin , basin waste pipe 32 mm , screw 50 by 8 , 50 by 20 mm cpvc r coupler , 40 mm ms pipe clamp , abs wallmount with shawar arm 75 mm , 20x15 cpvc brass elbow , 20 mm cpvc coupler , 20 mm cpvc union , 25mm cpvc nail clamp , 20mm cpvc elbow 90 degree , 20mm cpvc elbow 45 degree , 20 mm cpvc nail clamp

Related Searched Keywords : socket set

List of socket-set Tenders

Tender for gem bids for bill, scale, socket, b cupramanium, drafting set, roll canvas

Get socket set Tender Alert...

Related Searched Keywords : socket set

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us