Filters

List of socket-pin Tenders

List of latest socket-pin Tenders in Indian Tenders. Click on any socket-pin Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for socket-pin Tenders.

All-Tenders (76)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

Central Government/Public Sector

TRN :35764838 | 11 Nov, 2025

Tender Value : 4.31 Lacs

Panaji - Goa

Tender for gem bids for plain copier paper v3 isi marked to is 14490 q4 tonercartridges ink cartridges consumables for printers q2 pen uni ball blue eye fine ub 157 roller ball pen waterbased pigment ink stainless steel tip the uni flow systemunique window pen uni ball red eye fine ub 157 roller ballpen water based pigment ink stainless steel tip the uni flowsystem unique window pen uni ball green eye fine ub 157roller ball pen water based pigment ink stainless steel tipthe uni flow system unique window pen reynolds trimaxblue 05 tip pilot v7 07 mm fine tip blue ball pen penball montex and butter flow blue pen ball montex andbutter flow black pen ball montex and butter flow red pint type 100 nos pin stainless steel marker black permanentpen marker pen black permanent ohp cd marker luxorblack file cover duly printed with mes logo andorganisation name best quality as per office sample filecover white plain best quality as per office sample filecover white duly printed with mes logo and organisationname best quality as per office sample attendanceregister 100 pages pencil containing 10 nos in each pktapsara platinum extra dark for good handwriting longpoint sharpner non dust erraser small size apsara fevistick 25 gms flag 03 coloured paper oddy u pin uclip coloured plastic coated 50 nos in each pkt pokerwooden handle make national hd 45 all metal staplerstandard stapler with quick loading mechanism stapler10 no stapler pin 26 oblic 6 large kangro stapler pin no10 kangro paper cutter apsara nataraj handy cuttertough steel construction anti-rust coated bladesergonomic design smooth cutting anti-lock device white paper weight transparant coloured superior quality crystalacrylic highlighter marker pen containing set of 5 nossuperior quality tag 8 inch long superior quality consisting bid number gem2025b6715603 dated 31-10-2025 bid document1 76 1 1 of 100 tag in each bdl multicolur small, cotton file tag 22inch long superior quality consisting of 100 tag in each bdl, fevicol 200 gms bottle, whitner pen correction penbranded and superior quality, tape coloured halfinchx50mtr long red blue geen, tape brown 1 inchx65 mtrlong containing 25mm superior branded quality with bestadhesive, tape brown 2 inchx65 mtr long containing 25mmsuperior branded quality with best adhesive, tapetransparent half inchx65 mtr long point 7mm superiorbranded quality with best adhesive, tape transparent 1inchx65 mtr long 24mm superior branded quality with bestadhesive, tape transparent 2 inchx65 mtr long 24mmsuperior branded quality with best adhesive, dak pad folderblue leather superior quality for ge as per office sampleduly printed mes logo and organisation name, sketch penset different colors containing 12 pcs each pkt best qualityfor coloring sketching writing underlining and washableodorless non toxic fiber tip ink with ventilated safety cap, binder clip 25 mm containing 12 clip in each pkt superiorbrand quality, binder clip 32 mm containing 12 clip in eachpkt superior brand quality, binder clip 51mm containing 12clip in each pkt superior brand quality, scale plastic 12 inchlong superior quality, scale steel 12 inch long superiorquality, self stick pad small yellow repositional notes withbest quality adhesive for reposition of stick 75 x 75 mm 100sheet, envelope light green unlined cloth 16 inchx12 inch100 pcs per pkt, envelope light green as per specification, envelope light green unlined cloth 11 inch by 05inch pkt of200 pcs, toilet brush with handle best quality, pin cushionbox with magnetic top, do pad a4 size containing 100sheets on bond paper as per office sample, punchingmachine kores two holes, scissor large size 200mm goodquality, note pad dairy printed mes logo with office nameeach page having mes logo as per office sample size h22cm by w 13 point 5cm with spiral binding 150 pages 75gsm, wall clock best quality as per office ajanta quartz, white board marker blue good quality, white board markerblack good quality upto 2 point 5mm line width, dustercloth as per sample, brown register cover big size 10 mtr80 gsm 38 cm, scrubber scrotch brite, carbon paper packof 100 sheets, km card as per sample, pencil cell 1 point5v size aa duracell, pencil cell 1 point 5v size aaa duracell, tea cup set with saucer set of 6 bone china, harpic toiletcleaner 1 ltr, dettol liquid 1 ltr good quality 675 ml handwash refill, sutli good quality 50 mtr roll, room freshner224ml, colin glass cleaner 500 ml, phenyle 1 ltr goodquality, mop with handle good quality, rubber glovesgood quality, borosil 350ml set of 6 pcs radius visiontransparent drinking glass borosilicate glass tumblers forwater cold drinks juice flame proof microwave anddishwasher safe for daily use and gifting, godrej aer maticrefill automatic room fresheners violet valley bloom 2200sprays guaranteed lasts up to 60 days 225ml, extentioncord 6a 250v05 socket 03 mtr, hard broom sweepinggood quality, fool zaru good quality, black hit 400ml, good knight gold flash liquid refills 45ml each, jk papergreen paper ledger paper 8 point 5 by 14 inches 500sheets 80 gsm 1 ream, 180 gsm a4 size glossy photopaper as per sample specification, calculator 12 digit, register 300 pages, register 400 pages, pedal dustbinsteel 7 ltr cap with cover with lead without lead, transparent sheet roll 50 m long 3ft wide double, stamppad med size, vim bar 200 gm, water bottler 1 ltr steelhot and cold 24 hour, tissue paper packet 100 pcs per pkt, //bid details2 / 76 name plateas per sample specificaiton, taking downappointment board and refix with 23 nos as perspecification, door curtain 7 ft long for ge office as perspecification, sofa set cushion 1 ft by 1 ft, nepthelin ball100 gm pkt, pen stand as per sample, wash basecleaning brush, customized paper weight as per sampleacylic with mes logo and office name 2 inch by 2 inch, metal mesh 04 tear document tray desk organiser for geoffice as per sample, distil water for invertor, plantpruming secateurs with pvc grip steel handle 225mm, gardning hand tool kit cultivator trowel bent scroper 3inch blade set of three items, ten ltr plastic greenwatering can for gardening purpose, bathroom freshnerassortted pack of 05 zipper gel lastr upto 30 days eachbox having 05 pkt, jk bond paper for omr sheet 80 gsm500 paper ream, prb register 100 pages a4 size 75 gsmhard board binding with printing as per sample, log bookregister 100 pages a4 size 75 gsm hard board binding withprinting as per sample, car diary register 100 pages a4size 75 gsm hard board binding with printing as per samplepen uni ball blue eye fine ub 157 roller ball pen waterbased pigment ink stainless steel tip the uni flow systemunique window, pen uni ball red eye fine ub 157 roller ballpen water based pigment ink stainless steel tip the uni flowsystem unique window, pen uni ball green eye fine ub 157roller ball pen water based pigment ink stainless steel tipthe uni flow system unique window, pen reynolds trimaxblue 0.5 tip, pilot v7 0.7 mm fine tip blue ball pen, pen ballmontex and butter flow blue, pen ball montex and butterflow black, pen ball montex and butter flow red, pin t type100 nos pin stainless steel, marker black permanent pen, marker pen black permanent ohp cd marker luxor black, file cover duly printed with mes logo and organisation namebest quality as per office sample, file cover white plain bestquality as per office sample, file cover white duly printedwith mes logo and organisation name best quality as peroffice sample, attendance register 100 pages, pencilcontaining 10 nos in each pkt apsara platinum extra darkfor good handwriting, long point sharpner, non dusterraser small size apsara, fevistick 25 gms, flag 03coloured paper oddy, u pin/u clip coloured plastic coated50 nos in each pkt, poker wooden handle make national, hd-45 all metal stapler | standard stapler with quickloading mechanism, stapler 10 no, stapler pin 26 oblic 6large kangro, stapler pin no 10 kangro, paper cutterapsara, nataraj handy cutter, tough steel construction, anti-rust coated blades, ergonomic design, smooth cutting, anti-lock device, white, paper weight transparant colouredsuperior quality crystal acrylic, highlighter marker pencontaining set of 5 nos superior quality, tag 8 inch longsuperior quality consisting of 100 tag in each bdl multicolursmall, cotton file tag 22 inch long superior qualityconsisting of 100 tag in each bdl, fevicol 200 gms bottle, whitner pen correction pen branded and superior quality, tape coloured half inchx50mtr long red blue geen, tapebrown 1 inchx65 mtr long containing 25mm superiorbranded quality with best adhesive, tape brown 2 inchx65mtr long containing 25mm superior branded quality withbest adhesive, tape transparent half inchx65 mtr long point7mm superior branded quality with best adhesive, tapetransparent 1 inchx65 mtr long 24mm superior brandedquality with best adhesive, tape transparent 2 inchx65 mtrlong 24mm superior branded quality with best adhesive, dak pad folder blue leather superior quality for ge as peroffice sample duly printed mes logo and organisation name

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

State Government

TRN :35766126 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Dausa - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Central Government/Public Sector

TRN :35768490 | 24 Nov, 2025

Tender Value : 0

Darjeeling - West Bengal

Tender for gem bids for charcol, salt, tube light fitting 18 or 22 w 4 feet long, led security 50 w, pvc insulated cable 1 sqmm threecore copper, pvc insulated cable 1 point 5 sqmm singlecore copper conductor, pvc insulated cable 2 point 5sqmm twin core flexible copper conductor, switch socketcombination 3 or 5 pin 5 or 6 amp, modular socket 6 amp 2or 3 pin combine, modular switch 6 amp 2 or 3 pin combine, piano switch 3 pin 10 amp, ppr tee 20mm, ppr tee25mm, ppr elbow 20mm, ppr socket 20mm, ppr union20mm, dustbin 120 ltr capacity, hollow block of size400mm x 200mm x 200mm, cement opc 43 grade, pprpipe 40mm 10 feet long, elboe 40mm, ppr tee 40mm, ppr socket 40mm, ppr union 40mm, ppr reducer socket40 oblique 25mm, ppr cutter, pvc size 6 inch 10 feet long, elboe 6 inch, socket 6 inch, pvc solvent, hasco bladewith fram, hasco blade, aluminium window 3x3 feet withmech, ac mm ppr one way valve, welding machine wire, gloves, led flood light 50 w, cloth hanger, earthing rod2 ft, pbs roll, tiles 2x2

Central Government/Public Sector

TRN :35769248 | 10 Nov, 2025

Tender Value : 24.9 Thousand

Nagpur - Maharashtra

Tender for gem bids for electricalfittingwiringmaterialgokulocmine, brkr crct mccb, 48-6 3a, 240v, 2p, switch ictp, 415v, 100a, 3p, socket elec 230v, 15a, 3 pin, switchpiano, 4 15v, 15a, 3p, switch piano, 240v 5 3p, socketelec 230v, 5a, fl sh 3pin, wire elec cu, 2.5mm2, pvc, 1.1kv, unsh eathd, casing cpng 1in, pvc

Central Government/Public Sector

TRN :35769255 | 24 Nov, 2025

Tender Value : 0

Darjeeling - West Bengal

Tender for gem bids for tiles ceremic 300x300mm tiles ceremic 600x600mm cement opc 43 grad tarpauline hdpe laminated 30x20 ldpe sheet acrylic sheet 6x4x4mm acrylic sheet8x4x4mm synthetic enamel paint colour white syntheticenamel paint colour og synthetic enamel paint colourred synthetic enamel paint colour yellow syntheticenamel paint colour green synthetic enamel paint colourbrown paint brush 2 inc paint brush 4 inch pvc door self taping screw 35mm 1 point 5 inch star head screw 1inch ply wood 8 x 4 x 6mm thick ply wood 8 x 4 x 12mmthick ply wood 6 x 3 x 12mm thick ply wood 6 x 4 x 8mmthick nails 1 inch nails 2 inch nails 3 inch nails 4 inch ms binding wire door stopper ss curtain bracket cgisheet 810 x 2410 mm long 0 point 63mm thick 8 ft cgisheet 810 x 3050 mm long 0 point 63mm thick 10 ft cgisheet 810 x 3657 mm long 0 point 63mm thick 12 ft fevicol led tube light fitting 1 x 18 or 22 w 4 ft long ledtube light fitting 1 x 18w 4 feet long complete with allaccessories led bulb 9 w led bulb 12 w led securitylight 20 watt led security light 50w pvc insulatedcable 1point 5 sqmm single core copper conductor pvcinsulated cable 2 sqmm single core copper conductor cable pvc insulated unsheathed single core flexible copperconductor 1100v grade of size 2 point 5 sqmm cable pvcinsulated unsheathed twin core flexible copper conductor1100v grade of size 2 point 5 sqmm switch board with 5 or6 amp socket switch 5 amp switch 15 or 16 amp socket 5 amp socket 15 amp switch socket combination3 or 5 pin 5 or 6 amp switch socket combination 5 or 3 pin15 or 16 amp insulation tape mcb 6 amp sp mcb 20amp 240 v mcb 10 amp sp mcb 16 amps sp with box pvc exhaust fan 200mm pvc exhaust fan 250mm sweep bed switch on off switch piano switch 15 amp casing bid number gem2025b6845866 dated 01-11-2025 bid document1 90 0 0 caping 3 or 4 inch length 6 ft size, pendent holder, angleholder, change over switch 63 amp 4 pole automatic, changeover 100 amp 4 pole, cutting plier insulated 6 inchtaparia, gi pipe 20mm dia 6 mtr long, gi pipe 15 mm diamed grade, ppr pipe 15mm dia 6 mtr long, ppr socket75mm, gi tee 15mm, ppr tee 15mm, gi elbow 15mm, ppr elbow 15mm, ppr male threaded socket 20 15 mm dia, ppr female threaded socket 20 15 mm dia, ppr femalethreaded elbow 20 15 mm dia, ppr male threaded elbow20 15 mm dia, ppr male coupler 20 mm x 112, pvc l bend4 inch, ppr socket 15mm, pvc socket 100 mm, ppr union15mm, ppr union 75mm, ppr tee reducer 20 or 15mm, gi tee reducer 20 or 15mm, gi socket 15mm, gi nipple15mm 3 long, gi tank nipple 15 mm, gi end plug 15mm, pvc pipe 4 inch, towel road, rotational mouldedpolyethylene water storage tank double layer 200 ltr, rotational moulded polyethylene water storage tank doublelayer 500 ltr capacity, rotational moulded polyethylenewater storage tank double layer 1000 ltr capacity, bib cockbrass 15mm, pvc bib cock 20mm, pvc bib cock 25mm, brass bib cock 15mm, brass bib cock 20mm, cp pillar cock15mm, brass stop cock 20mm, pvc stop cock 20mm, snow white colour european wc with s or p trap concealedof size 650x405x770m with sheet cover, wash basin, waste pipe for wash basin, angle cock wash basin, vitreous china urinal pot, wastage pipe for urinal pot, gunmetal gate valve 15 mm, gun metal gate valve 25 mm, gun metal gate valve 40 mm, overhead shower withoutarm, gi reducer 20mm to 15mm, ppr pipe cutter machine, hack saw blade, iron cutting machine blades 4 inch, wood cutting blades 5 inch, tiles cutter blade, lookingmirror cum cabinet 450mm x 300mm, plastic jerricane 20ltrs, floor tile white 2 x 2, u channel, white cement, cement, sand, silicone tube, laip 6 ft, saip 2 ft, concertina coil 5 mtr, change over 100 amp, armd cable4 core 25 sqm, ss combine 15 amp, ss combine 5 amp, mcb 10 amp, mcb 16 amp, mcb 32 amp, paint brush 2inch, wall putty, paint pink, sealing compound grade a drfixit, m seal, tiles 1x1, cgi sheet 10 ft, cgi sheet 8 ft, taping screw 2 inch, pvc pipe 6 inch, sheet 6x4, tarpaulin tripal 30x30

Central Government/Public Sector

TRN :35769754 | 12 Nov, 2025

Tender Value : 0

Mumbai - Maharashtra

Tender for gem bids for piston, piston assy, piston ring set, sleeve cylinder, injectornozzle, fuel guage, mtg pad, tie rod end set, completegasket set, benjo washer, benjo bolt, fuel pipe 1.2 ft, fuel pipe 1.5 mtr, fuel pipe over flow 4 hole, fuel overflow rail type pipe, temp guageassy, oil pressure guage, blower bearing small, blower bearing big, cam shaft bush, oil filter, fuel filter primary secondary, inlet exhustmanifold stud, inlet exhust manifold nut, canopy mtg nut, canopy mtg bolt, crank seal, coupling, connecting rodcell, main bearing cell, push tube o ring, canopy doorlocking pin with nut, coupling nut bolt 24 mm, decompressor lever mtg bolt, nut 10 mm 1.5 inch, anabond tube, stopper cable assy, valve set, valve guideset, valve seat set, valve seal, feed pump assy, speedadjuster assy, nut bolt 13mm, crank shaft bearing, thrustwasher, digital display meter, selector switch, start pushbutton, main socket, led bulb 24 volt, dc on off switch, toggle switch, insulation tape, sleeve 6mm, sleeve 2mm, wire 4mm, wire 1.5, electronic bty charger, avr, cableracks, identification plate, wire marker, canopy light, zipper cable /bid number: gem/2025/b/6848508* /dated: 01-11-2025 & & / bid document1 / 42

Central Government/Public Sector

TRN :35770160 | 12 Nov, 2025

Tender Value : 0

Imphal - Manipur

Tender for gem bids for led bulb 18w 220-240 volt led bulb 9w 220-240 volt ceiling fan 1200mm sweep with electronic regulatorconforming to is switch socket combination 6 amp 240vwith gang box isi marked switch socket combination 15amp 240v with gang box isi marked pedestal fan 400mmsweep wall mounted fan 300mm sweep conforming to is socket 3 oblique 6 pin 5 obliqu 15 amp 240v isi marked exhaust fan 300mm sweep conforming to is mcbdistribution box 8 way conforming to is 13032 mcb 20amp sp 240 volts angle holder bakelite isi marked concertina coil 1050mm dia hdpe sand bags of size14inch x 36inch weight not less than 60 gms led securitylifgt fitting 20 watts security light fittings for 65w led plywood commercial bwr grade isi marked of size 8ft x 4ftx 12mm thick bib cock fancy type 15mm long nozzle cpbrass mirror for gents of size 30inchx 15inch x5mm thick pvc connection pipe 15mm dia 450mm long with both sidenut and washer jet spray teflon tape 3 oblique 8 inchwide 10 mtr roll gun metal gate valve 25mm m painingbrush 100mm standard quality cp towel rail 600mm long20mm dia with bracket bricks sub class b old size bestlocally available minimum compressive strength 75 kgoblique sqcm water absorption not more than 20percentage app water proofing membrane 3 mm thick 1mwide 10 m long long angle iron picket of size 18 mtrlength of size 2inch x2inch laip pendent holder bakelite isimarked led batten surface 4ft long 18w output 1600lumen per watt with suitable powder coated frame endcape and connector swtich piano 6 amp 240v isi marked cp cast copper alloy bib cock long body 15mm bore cpshower rose 75mm dia with swivel arm 15mm bore squareoblique round shape mcb 10 amp sp with enclosure boxmild steel mcb 32 sp 240 volts mcb 40 amp sp 240 bid number gem2025b6848455 dated 01-11-2025 bid document1 63 0 0 volts, , mcb 63 dp 240 volts, , bulk head fitting in deepdrawn anodized aluminum body, epoxy powder coated andhead resistant prismatic glass cover with specially., waterdespencer 20 ltr make voltas, vitreous china pedestalpattern water closet european type ewc inclk pvc seat andcover, nylon rope 32mm, vitreous china wash hand basinof size 550mm x 400mm, pvc insulated sheathedunarmored cable 6sqmm twin core aluminum conductor isimarked with working voltage upto 1100 volt roll of 90 mtrs, flexible cable twin twisted roll of 90 mtr 23 oblique 0.0040, conforming to is, pvc sheathed unarmored strandedcopper conductor cable of size 1sqmm conforming to isimarked 90m roll, tripple layer hdpe water storage tankcylindrical vertical with closed top 1000ltrs capacityconforming to is specification, tripple layer hdpe waterstorage tank cylindrical vertical with closed top 500ltrscapacity conforming to is specification, 1 hp motor, nonskid ceramic colored tiles of size 600mm x 600mm x 9 to10mm thick, sheated unarmored stranded copperconductor cable of size 1.5sqmm conforming to isiconductor cable to size 1.5sqmm conforming to isi marked90m roll, flood light 200 watt, ppgi profiled sheet of size10ft x 3.5ft, 0.50mm thick, mild steel corrugatedgalvanized cgi sheet 8ft x 3ft, .63mm thick isi marked, ordinary portland cement 43 grade in hdpe bags of 50 kgseach, confirming to is 269-1976, m seal 100gm, pvcsheathed unarmoured stranded copper conductor cable ofsize 2.5sqmm conforming to isi marked 90m roll, pvcsheathed unarmoured stranded copper conductor cable ofsize 4sqmm conforming to isi marked 90m roll, thinner forpaint, tarpentin oil, paining brush 75mm standard quality, painting brush 50mm standard quality, coarse sanddimapur sand conforming to is 383 to1978., coarseaggregate crushed stone 20mm graded conforming to is383 to1979, plywood commercial bwr grade isi marked ofsize 8ft 4ft x 19mm thich, cp cast copper alloy stoop cock15 mm bore, mild steel hard drawn wire mesh 50 x 50mmpitch 3mm dia of wire, weight not less that 2.20 kg per, white cement, tirpolean plastic 30 x 30, tirpolean plastic24x18, pvc swr pipe 75m dia 3m long with socket end isimarked, pvc swr pipe 110m dia 3m long with socket endisi marked, pvc l bow 4 inch, pvc t 4 inch, pvc socket 4inch, pvc l bow 3 inch, pvc t 3 inch, pcv socket 3 inch, pixel bulk head fitting in deep drawn anodized minimumbody, epoxy powder coated and heat resistant prismaticglass cover with specially, change over switch 63 amp fourpole, change over switch 100 amp four pole, 25 ltr waterstrong geyser plastic body with all accessories forinstallation, pvc insulated sheathed unarmoured cable10sqmm twin core aluminium conductor isi marked withworking voltage upto 1100 volt roll of 90 mtr, insulationtape 3 oblique 8 inch wide 9 mtr roll, mild steel wire nailssorted size, gi binding wire 3mm dia, curtain rod mscp20mm dia 12ft long, bracket for curtain rod aluminiumpowder coated curtain rod in white colour 20 oblique 25mmdia, synthetic enamel paint high gloss superiour qualityblack colour, synthetic enamel paint high gloss superiourquality red colour, synthetic enamel paint high glosssuperiour quality yellow colour, synthetic enamel painthigh gloss superiour quality og colour, synthetic enamelpaint high gloss superiour quality white colour, plywoodcommercial bwr grade isi marked of size 6ft x 3ft x 12mmthick, cp cast copper alloy pillar cock 15mm, batten holderbakelite, vitreous china urinal pot bowl type including //bid details2 / 63 spreader, solvent cement for pvc pipe, distemper paintemulsion oblique acrylic distemper, pvc flexible ribbed pipe20mm dia

Central Government/Public Sector

TRN :35756804 | 10 Nov, 2025

Tender Value : 0

Dimapur - Nagaland

Tender for gem bids for universal batten with g-13 lamp holder for t-8 lamps 20watt single side connection as per zonal specification led2 feet x2 feet 42 watt electronic drive recess mountedfitting warmwhite oblique coolday white make philipsoblique wipro oblique cg oblique bajaj oblique surya andeqivalent ultra modern recess mounting luminaire highbrightness leds 42 watt led 6000k led green lamp 05watt make philips oblique wipro oblique cg oblique bajajoblique surya and equivalent led white lamp 05 wattmake philips oblique wipro oblique cg oblique bajaj obliquesurya and equivalent ledyellow lamp 05 watt makephilips oblique wipro oblique cg oblique bajaj oblique suryaand equivalent led red lamp 05 watt make philipsoblique wipro oblique cg oblique bajaj oblique surya andequivalent runway lamp 200watt as per zonalspecification aviation lights alumimium led neon as perzonal specification globe led as per zonal specification city 3 decorative wall light fitting make philips oblique wiprooblique cg oblique bajaj oblique surya and equivalent mcbdb 2 way make siemens oblique l and t oblique hageroblique abb and equivalent isolator 100 amps 4 pole tpnmake siemens oblique l and t oblique hager oblique abband equivalent change over swtich 63 amp 415 volt makehavells oblique legrand oblique abb and equivalent cableflexible copper conductor 23 oblique 0076 make finolexoblique rr kable oblique kei oblique polycabe and eqivalentas per buyer reqmt cable flexible copper conductor 14oblique 0076 make finolex oblique rr kable oblique keioblique polycabe and eqivalent as per buyer reqmt pvcround cable 3 core 23 oblique 0076 make finolex obliquerr kable oblique kei oblique polycabe and eqivalent pvcround cable 3 core 40 oblique 0076 make finolex obliquerr kable oblique kei oblique polycabe and eqivalent bid number gem2025b6797642 dated 31-10-2025 bid document1 120 1 1 250mm exhaust fan plastic body make bajaj oblique cgoblique sudhir and eqivalent, 200mm exhaust fan plasticbody make bajaj oblique cg oblique sudhir and eqivalent, 150mm exhaust fan plastic body make bajaj oblique cgoblique sudhir and eqivalent, ht barrel fuse 20 amp pkt of10 nos make denson oblique rashtriya oblique m-3 andequivalent, ht barrel fuse 10 amp 10nos pkt as per zonalspecification, barrel fuse suitable for ht 11 kv ratedcapacity 60 amps as per zonal specification, ht barrel fuse5 amp 10 nos pkt as per zonal specification, ht barrel fuse15 amp 10 nos pkt as per zonal specification, capacitor forcelling fan 2.5 mfd make universal oblique anchor andeqivalent, lugs copper alloy 150 sqmm make denseenoblique raychem oblique m-3 and equivalent, lugs copperalloy 185 sqmm as per zonal specification, lugs copperalloy 95 sqmm as per zonal specification, lugs copperalloy 120 sqmm as per zonal specification, lugs copperalloy 70 sqmm as per zonal specification, lugs copperalloy 50 sqmm as per zonal specification, lugs copperalloy 35 sqmm as per zonal specification, lugs copperalloy 25 sqmm as per zonal specification, lugs copperalloy 240 sqmm as per zonal specification, lugs copperalloy 400 sqmm as per zonal specification, plug top 3 pin 5oblique 6 amp make anchor oblique schnieder obliquehager and equivalent, pinao socket 16 amp, 5 pin makeanchor oblique schnieder oblique hager and equivalent, 5amps socket make anchor oblique schnieder oblique hagerand equivalent, pvc batton holder make anchor obliqueschnieder oblique hager and equivalent, pvc angle holdermake anchor oblique schnieder oblique hager andequivalent, pvc pendent holder make anchor obliqueschnieder oblique hager and equivalent, modular fanregulator 1200 oblique 1400 mm make as per sample, thread bulb big led as per zonal specification, threadbulb small led make philips oblique wipro oblique cgoblique bajaj oblique surya and equivalent, pvc ceiling rose2 oblique 3 terminal make anchor oblique schnieder obliquehager and equivalent, insulation tape roll 38 mm x 25 mlong as per zonal specification, insulation tape roll 20 mmx 25 m long as per zonal specification, insulation tape roll15 mm x 25 m long as per zonal specification, insulationtape roll 25 mm x 25 m long as per zonal specification, ampere tape 15mm width as per zonal specification, pvcswitch board 8 feet feet x6 feet feet make presto plastoblique finolex oblique kalinga and equivalent, pvc switchbd 4 inch x4 inch make presto plast oblique finolex obliquekalinga and equivalent, pvc switch bd 7 inch x 4 inch makepresto plast oblique finolex oblique kalinga and equivalent, pvc switch bd 12 inch x10 inch make presto plast obliquefinolex oblique kalinga and equivalent, pvc switch bdrectangular 8 inch x10 inch make presto plast obliquefinolex oblique kalinga and equivalent, pvc casing capping15mm make presto plast oblique finolex oblique kalingaand equivalent, pvc cassing capping 20 mm make prestoplast oblique finolex oblique kalinga and equivalent, pvccasing capping 25 mm x 12mm make presto plast obliquefinolex oblique kalinga and equivalent, pvc casing capping32 mm make presto plast oblique finolex oblique kalingaand equivalent, pvc conduit pipe 25 mm make presto plastoblique finolex oblique kalinga and equivalent, pvcconduit pipe 20 mm make presto plast oblique finolexoblique kalinga and equivalent, pvc flexible pipe 20 mmcorrugated make presto plast oblique finolex obliquekalinga and equivalent, pvc flexible pipe 25 mm //bid details2 / 120 corrugated make presto plast oblique finolex obliquekalinga and equivalent, pvc flexible pipe 32 mmcorrugated make presto plast oblique finolex obliquekalinga and equivalent, tarpentine oil make asian andequivalent, paint og of 04 ltr container make asian obliqueberger oblique dulux and equivalent, paint black of 04 ltrcontainer make berger oblique asian oblique shalimar andequivalent, synthetic enamel paint white of 04 ltrcontainer 1st grade make dulux oblique berger obliqueasian, timber scantling 1st class 50x50mm teak wood, timber scantling 1st class 100x50mm teak wood, plywoodcommercial bwr grade 7 feet x3 feet x12mm thick makearchid oblique globe oblique green ply and equivalent, prelaminated mdf board 8 feet x4 feet x 18 oblique 20 mmmake bhutan oblique novapam oblique green ply andequivalent, block board bwr 8 feet x4 feet x19 mm thickmake archid oblique globe oblique green ply and equivalent, ply wood bwr 8 feet x 4 feet x 12 mm thick make archidoblique globe oblique green ply and equivalent, ply woodbwr 8 feet x 4 feet x 6mm thick archid oblique globeoblique green ply and equivalent, ply wood one side teakface size 8 feet x 4 feet x 4mm thick archid oblique greenply and equivalent, ply wood bwr 8 feet x 4 feet x 4mmthick archid oblique globe oblique green ply and equivalent, pre-laminated mdf board 8 feet x4 feet x12mm bhutanoblique novapam oblique green ply and equivalent, headboard pf bed ply top as per zonal specification, foot boardof bed ply top as per zonal specification, timber scantling1st class 75mm x 40mm teak wood, timber scantling 1st coblique h oblique w 30mm x 25mm teak wood, timberscantling 1st class 25x50 mm teak wood, laminated sheet8 feet x 4 feet x 1 mm thick make green ply oblique kitoblique archid and equivalent, beading teak wood size4mm x40mm as per zonal specification, teak woodenbeading 12x25mm, teak wood beading 20x25mm, teakwooden beading half round 20mm as per zonalspecification, teak wooden beedings1 inch x1 inch x6 feetlong as per zonal specification, looking mirror size 365mm x 1220mm x 5mm thick make modi guard andequivalent, looking mirror size 380 mm x 760mm x 5mmthick modi guard and equivalent, mirror of size1200x600x5mm thick modi gurad oblique gold fish andequivalent, glass panes size 3 feet x2 feet x5mm modiguard and equivalent, pvc beading 4mm x 20mm as perzonal specification, pvc beading 4mm x 15mm as perzonal specification, pvc seat for chair varamdah as perzonal specification, pvc seat for chair dining jco feet soblique ors as per zonal specification, nails wire 75mm asper zonal specification, nails wire 100mm as per zonalspecification, nails wire 40mm as per zonal specification, nails wire 60mm as per zonal specification, nails wire50mm as per zonal specification, nails wire 25mm as perzonal specification, nailes wire 150 mm as per zonalspecification, ms screw 35 mm as per zonal specification, ms screw 50 mm as per zonal specification, ms screw20mm as per zonal specification, ms screw 25 mm as perzonal specification, ms piano hinges 50mm x 5 feet longeach pkt 100 nos as per zonal specification, steel screw35mm each pkt 100 nos as per zonal specification, steelscrew 3 oblique 4 inch flat head as per zonal specification, machine screw full thread 35mm each pkt 100 as per zonalspecification, machine screw full thread 20mm each pkt100 as per zonal specification, machine screw 75mm withnut 100 nos of pkt as per zonal specification, hinges ms 50 //bid details3 / 120 mm to 100 mm as per zonal specification, hexa bladedouble edge as per zonal specification, gi check nut32mm as per zonal specification, gi lock 6 levers foralmirah four 04 holes godrej pattern and equivalent, gilock 6 levers for almirah two 02 holes godrej pattern andequivalent, lock for cup board godrej oblique norexoblique priya and equivalent, gi elbow 3 way 32 mm as perzonal specification, thinner 4 ltr in each container asianand equivalent, varnish 4 ltr container asian andequivalent, touch wood 1 ltr container asian andequivalent, dendrite 1 kg in container pidilite andequivalent, fevicol make - pidilite and equivalent, copalvarnish make - peacock and equivalent, pila mati as perzonal specification, basanti colour powder pkt 10 gms asper zonal specification, black colour powder as per zonalspecification, brown clolur powder as per zonalspecification, sand paper no 60 10 mtr as per zonalspecification, panel pin 25mm as per zonal specification, panel pin 20mm as per zonal specification, hasp andstaple steel 100mm as per zonal specification, slidingwheel for glass shutter as per zonal specification, aluminium peg as per zonal specification, cp knob 40 mmas per zonal specification, tapestry cloth best quality asper zonal specification, cloth malmal white 1.2 mtr wideas per zonal specification, cloth green blaizer1.5 mtr asper zonal specification, latherised rexin cloth best qualityas per zonal specification, nylon tape newar 50 oblique 55mm width. best quality as per zonal specification, bowhandle 100 mm as per zonal specification, broom sticks forsweeping as per zonal specification, hard rubber shoe forchair verandah as per zonal specification, hard rubbershoe for steel table as per zonal specification, aluminiumsheet 22 gauge as per zonal specificationuniversal batten with g-13 lamp holder for t-8 lamps 20watt, led 2x2 42 watt electronic drive recess mounted, ultra modern recess mounting luminaire leds 42 watt led6000k., led green lamp 0.5 watt make :philips/wipro/cg/bajaj /surya, led white lamp 0.5 wattmake : philips/wipro/cg/bajaj /surya, ledyellow lamp 0.5watt make : philips/wipro/cg/bajaj /surya, led red lamp0.5 watt make : philips/wipro/cg/bajaj /surya, runwaylamp 200watt as per zonal specification, aviation lightsalumimium led neon as per zonal specification, globeled as per zonal specification, city 3 decorative wall lightfitting make : philips/wipro/cg, mcb db 2 way make :siemens/l&t/hager/abb & equivalent, isolator 100 amps 4pole tpn make : siemens/l&t/hager/abb, change overswtich 63 amp 415 volt make : havells/legrand, cableflexible copper conductor 23/.0076 as per buyer reqmt, cable flexible copper conductor 14/.0076 as per buyerreqmt, pvc round cable, 3 core 23/.0076 make : finolex/rrkable/kei, pvc round cable, 3 core 40/.0076 make :finolex/rr kable/kei, 250mm exhaust fan plastic bodymake:bajaj/cg/sudhir & eqivalent, 200mm exhaust fanplastic body make : bajaj/cg/sudhir & eqivalent, 150mmexhaust fan plastic body make : bajaj/cg/sudhir &eqivalent, ht barrel fuse 20 amppkt of 10 nos make :denson/rashtriya/m-3, ht barrel fuse 10 amp10nos pktas per zonal specification, barrel fuse suitable for ht 11kv rated capacity 60 amps, ht barrel fuse 5 amp10 nospkt as per zonal specification, ht barrel fuse 15 amp10nos pkt as per zonal specification, capacitor for cellingfan 2.5 mfd make : universal/anchor, lugs copper alloy150 sqmm make : denseen/raychem/m-3 , lugs copperalloy 185 sqmm as per zonal specification, lugs copperalloy 95 sqmm as per zonal specification, lugs copper //bid details4 / 120

Related Searched Keywords : socket pin

List of socket-pin Tenders

Get socket pin Tender Alert...

Related Searched Keywords : socket pin

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us