Filters

List of sand-filling Tenders

List of latest sand-filling Tenders in Indian Tenders. Click on any sand-filling Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for sand-filling Tenders.

All-Tenders (13)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Central Government/Public Sector

TRN :35769348 | 11 Nov, 2025

Tender Value : 0

Jodhpur - Rajasthan

Tender for gem bids for repair, repair oblice maintenance of bb roller plain 50 nosat ge ep jodhpur, taking out to contractor work shop forrepair oblice maintenance and brought back to ge ep, repair oblice maintenance moveable ends bush shaft etcby petrol o0blice kerosene as per rate anaysis s no 2, dismantilling and re assembling complete and arranging onground, s and f en series steel bush as per sample, s andfgrease filling lid as per sample, s and f en series steelshaft as per sample, s and f mild steel handle as persample, s and f nut bolt washer and spring washer asrequired, s and f special roller as per sample, s and f sideoblice middle main bush plate as per sample, applyinggrease to each bush and shaft 0 point 25 kg per 450 per kg112 point 50, main body alignment center lining measuringand adjusting angles etc on special cnc machine, rolleralignment center lining measuring and adjusting angles etcon special cnc machine, re threading oblice strengtheningold threads, welding broken welds and strengthen weldingafter proper grinding and cleaning, requirement of redoxide metal primer, requirement of steel wire brush, requirement of cotton waste, requirement of turpentineoil oblice thinner, requirement of olive green metal paint, labour for appling paint, numbering and naming of partwith white metal paint, requirement of first quality ultrawhite glossy finish synthetic enamel paint for writing partname oblice number 40 ml nos, requirement of sandpaper 02 nos per roller plain

Central Government/Public Sector

TRN :35761009 | 08 Nov, 2025

Tender Value : 0

Koraput - Orissa

Tender for gem bids for supply, armoured ofc cable, 32 mm hdpe pipe, marking ofcement chamber pits, fixing of ofc route markers, horizontal driling, laying of pvc casing and piping, singemode ofc splicing, multi mode ofc splicing, otdr testing, termination of ofc connector, laying of ofc cable, hdpepipe, sand filling and 3.5 feet digging and back filling

State Government

TRN :35745533 | 06 Nov, 2025

Tender Value : 24.02 Lacs

Gomati - Tripura

Tender for fdr/jurisdiction mtc. of different roads under pwd randb, jatanbari sub-division, / sh-land slide clearance, bats filling, wbm, patch re-carpeting, grouting, sand seal coating, surface drains, wire crates etc. group-ii

Central Government/Public Sector

TRN :35751376 | 10 Nov, 2025

Tender Value : 0

Panchkula - Haryana

Tender for gem bids for excavation, pcc, brick work, damp proof, plaster, prov and fixing floor tiles, dismentling ofexisting door and windows, dismentling ofexisting brick work, prov and fixing puff panels, removing of existing pvc sheet, dismentling ofexisting pathway shed, fab and eriction of msangle structure in roof, sand filling, prov andfixing grid ceiling, refing of door and windows, electrification, extn of ac ducting, grid lights 2x2, prov of computer wiring extn, extn of firesensors, paint

State Government

TRN :35741870 | 06 Nov, 2025

Tender Value : 23.80 Lacs

Gomati - Tripura

Tender for fdr/jurisdiction mtc. of different roads under pwd randb, jatanbari sub-division, /sh-construction of paver block, patch metalling, patch re-carpeting, grouting, sand seal coating, wire crates, land slide clearance, bats filling, protection work etc.

Corporations / Associations / Others

TRN :35723107 | 06 Nov, 2025

Tender Value : 2.86 Lacs

Tambaram - Tamil Nadu

Tender for providing open gym equipment - earth work excavation for foundation in all kinds ...lling the sides with excavated earth etc. complete supplying stone dust and filling in regular laye...ting etc. complete for foundation, basement, etc. plain cement concrete work 1:4:8 (1 cement, 4 crus...etc. complete for foundation, etc. upto basement brick work with fly ash bricks of size 230mm x 110m...ick walls upto basement (upto 1m high above g.l.) plastering with cement mortar 1:4 (1 cement and 4 ...sand) 12mm thick including curing, etc., complete. painting the new plastered walls with two coats of...ion and the durability period should be 3 years... paving the flooring with cement concrete tiles h...g pointing with colour cement etc., complete,(isi) supply and fixing of push pull up chair promotes ...st / foot paddle for long lasting life at dr. ambedkar play ground in division - 92, unit - 20, zone - vii

State Government

TRN :35712379 | 17 Nov, 2025

Tender Value : 3.45 Lacs

Howrah - West Bengal

Tender for land development work with sand filling at new construction of sankrail development block under sankrail panchayat samity under 15th fc fund for fy-2024-25

corporations/Associations/Others

TRN :35699502 | 14 Nov, 2025

Tender Value : 71.51 Lacs

Kolkata - West Bengal

Tender for replenishment of filter media in filter beds no. 4, 5, 7, 9 and 10 along with replacement of damaged pipelines and topping up of sand filling in the remaining 11 beds at wtp-i under grww. kmc/ws/grww/t-29/2025-26

Central Government / Public Sector

TRN :35699702 | 06 Nov, 2025

Tender Value : 10.63 Lacs

Rampur Up - Uttar Pradesh

Tender for gem bids for 1 air compressor house log book, bulk reporting register, market return cylinder record with carbon copy, bulktanker safety check by security, valve changing checkrecord, cylinders counting as on, deployemnt roster forbcwe, daily safety audit dsa 3 pages, dg set log book, deployemnt of contract labores, daily consumablesmaterials, filling m c accuracy check record, fire pumphouse log book, gate pass book labour, driver, contractor, haulage electrical supervisor work book, check scaleaccuracy record, tare weight correction control record, labour entry attendanec register, lpg pump andcompressor house log book, machine hourly reaading logbook, packed tts in out register, pmcc log book, packed bulk truck security check, patrolling record, pumphouse log book, night shift security deployment, cylindercounting register gate 2, rqc book, shift activity reportwith carbon copy, cylinder receipt tally register, materialdemand books with carbon copy, packed truck securitysafety check, sticker for nd cylinders, before after tldcheck report by tld employee, vld old cvt calibrationrecords, inventory register gate 1, attendence registerstaff officer, record of quality inspection satutatry testedcylinders, lpg cylinders acceptence check record, bincards store, route cards stp, gauge book sandd, gatepass card contarctor labour, daily security checklist forpacked bulk tts with carbon copy, quarterly safetychecklist for packed tts with carbon copy, quarterlysafety checklist for bulk tts with crabon copy, stockregister, a4 paper reams, cylinder found fit for repairwith carbon copy, trem card bulk tts, trem cardpacked tts, saftey kit card, letter head iocl, sopbooklet bilingual, sop handbook, certificate of periodictesting of lpg cylinders, flex normal quality, star flexpanel sheet, vinyl flex, butterflow blue pen cello, use andthrow pens blue, red pens, cd marker, black marker, gum tube small, fevistick, pencil, erraser, stappler pinssmall, alpin, cobra file, box file, register 200 page, carbon papers, calculator, whitener pens, white tape 2inch, khakee tape 2 inch, note pads spiral, note padblank, sharpner, board marker blue, stepllers, l folder, button folder, white chalk

Related Searched Keywords : sand filling

List of sand-filling Tenders

Tender for fdr/jurisdiction mtc. of different roads under pwd randb, jatanbari sub-division, / sh-land slide clearance, bats filling, wbm, patch re-carpeting, grouting, sand seal coating, surface drains, wire crates etc. group-ii

Tender for fdr/jurisdiction mtc. of different roads under pwd randb, jatanbari sub-division, /sh-construction of paver block, patch metalling, patch re-carpeting, grouting, sand seal coating, wire crates, land slide clearance, bats filling, protection work etc.

Tender for land development work with sand filling at new construction of sankrail development block under sankrail panchayat samity under 15th fc fund for fy-2024-25

Tender for replenishment of filter media in filter beds no. 4, 5, 7, 9 and 10 along with replacement of damaged pipelines and topping up of sand filling in the remaining 11 beds at wtp-i under grww. kmc/ws/grww/t-29/2025-26

Get sand filling Tender Alert...

Related Searched Keywords : sand filling

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us