Filters

List of round-washer Tenders

List of latest round-washer Tenders in Indian Tenders. Click on any round-washer Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for round-washer Tenders.

All-Tenders (21)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :34439059 | 17 May, 2025

Tender Value : 0

Purnia - Bihar

Tender for gem bids for steel tubes, tubulars and other steel fittings as per is 1239 (part 2 - steel pipe fittings) (q3) , steel pipes for water and sewage as per is 3589 (q3) , copper alloy gate valve for waterworks purpose as per is 778 (q3) , m - seal as per is 9197 (q3) , ply wood 8 footx4 footx 12 mm thick , ply wood 8 footx4 foot x 6mm thick , hydraulic door closer heavy duty rm-1000 , alum tower bolt 150 mm long bolt dia 12mm barrel dia 13mm , alum tower bolt 200 mm long bolt dia 12mm barrel dia 13mm , aluminium sliding door bolt 300mm long 16mm dia , screw steel 15 or 20mm , screw steel 25 or 30mm , screw steel 35 or 40mm , ss butt hinges 127 x 76 x 2 point 5 mm , m s but hinges medium weight 100 mm , fevicol 1 kg , gi nails 25mm , alumn bow handle 125mm rod dia 12 mm , alum tower bolt 100 mm long comma bolt dia 12mm barrel dia 13mm , gi nails 20mm , gi nails 2 inch , pvc rawl plug 100 nos in pkt , tools kit for trades man , plain glass panes 3 mm thick , wooden beading of size 20mm x 6mm x 8 inch , wooden beading of size size 20mm x 6mm x 20 inch , round plug wooden 25mm , aluminium door stopper 100mm long with leg , alum bow handle 150 mm rod dia 12 mm , bracket for curtain rod ss , gi screw 20 mm comma 25mm comma 35mm comma 50mm , haps and staple 100mm long ss , hasp and stapple 75mm long comma ss , ss wire mesh 0 point 36 mm dia of wire and width of aperature 1.40 mm 15 mtr roll , plywood 8 footx4 footx4mm thick , screw steel 40 or 50 mm , putty 1 kg pkt , alumn sheet 0 point 5mm thick comma 1 mtr wide 24g , stainless curtain rod 19 mm dia x 12ft lenght , super flush strip 100 mm wide 10 mtr long , hacksaw blade 25mm x 300mm , water storage tank 1000 ltr isi marked , cp bottle trap for whb 32 mm dia , tank cover pvc for 500 ltr capacity with fixing arrangement , tank cover pvc for 1000 ltr capacity with fixing arrangement , brass jumper washer for 15 mm bib tap , gi hook for pipeline , gi check nut 20mm , gi check nut 25mm , ms angle bracket for whb , pipe 32 mm dia for l by f pvc flush pipe , cement 50 kg opc dash 43 grade , white cement 1 kg , pad lock 6 lever , drill bit for brick hole 4mm 5mm 6mm 8mm and 10mm

Central Government/Public Sector

TRN :34427028 | 16 May, 2025

Tender Value : 0

Visakhapatnam - Andhra Pradesh

Tender for gem bids for assembled pcb set for video switcher,8 ohms 4w 4 round speaker,33 ohms 5w wire wound resistor,transistor 2n 3055,transistor bd 139,2n-5294 transistor,pan & tilt unit make dennard model d-488,assembled pcb set for 1/2 ccd b/w camera model ncd-370 or 38,zoom lens auto lris 8mm to 80mm,ionisation smoke detector (without mounting box),cable 2 core 1.5 sq,mm,2 x 12v,7 ah maintenance free lead acid battery set (2 sets),cable 2 core 2.5 sq,mm,cable 4 core 1.5 sq.mm,copper cable 16x1.5mm sq collectively screened,copper cable 2x1.5mm sq collectively screened,zoom lens 30x (10-300mm focal length),1/2 colour ccd high sensitivity high resolution dsp camera,weather proof housing with wiper and washer unit,3 amps glass fuse cartridge,zone module pcb(es-096 r1 and es-097 r2) with out front plat,ammeter,bd139 transistor,transistor 2n 3055(metal),2n3055 transistor,transistor bc-117 (small, signal metal),bc177 transistor,photoelectric smoke detector (head only),photoelectric smoke detector with compatible base,zone module(pcb es-096 and es-097r1)without front plate,fuse holder,12v 35ah maintenance free battery,power supply unit,2 amp.glass fuse cartridge,3amp glass fuse cartridge,1 amp glass fuse cartridge ( small )

Central Government And Public Sector

TRN :34417741 | 15 May, 2025

Tender Value : 0

Angul - Orissa

Tender for gem bids for 1710 material code -20301105060 -neoprene rub washer id103 od115 material code -20301105130 - neoprene washer material code -21995650580 -rubber sealing cordn round 20mm dia material code -23730011400 - ruber gasket material code -24125155520 - pin bush type coupling pin with bush material code - 24125737140 - pilot diaphragms v 4532907 0001 material code -24125737760 - oring dia 89.1mm.wire dia 5.7mm rubbe material code -24125802730 - pulse valve diaphragm material code -24135052370 - silicon rubber gasket material code -24140001140 - screw conv of line iv disch pipe bellow

Central Government/Public Sector

TRN :34414872 | 12 May, 2025

Tender Value : 0

Angul - Orissa

Tender for gem bids for pprocurements of spares for sct 150 48 2 pumps impeller 1st stage one to one part no sct15048157 , impeller 2st stage one to one part no sct15048158 , pump shaft steel one to one part no 18000251mc , casing wear eing ci one to one part no 190 , bearing housing de nde one to one part no 27000011mc , shaft sleeve de ss one to one part no 31000251mc , shaft sleeve nde ss one to one part no 31701251mc , inter stage bush one to one part no sct15048313 , round lock nut one to one part no 33600053mc , locking washer one to one part no sct15048415 , eye bolt one to one part no 30300063mc , impeller key one to one part no sct15048320 , coupling key one to one part no sct15048321 , set of o ring rubber one to one part no sct15048ssor1 , inter stage ring one to one part no sct15048204

Central Government/Public Sector

TRN :34415731 | 13 May, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for gem bids for ms round rod 25mm dia , ms round rod 30mm dia , ms round rod 12mm dia , power hack saw blade 16 inch , hand saw blade 12 inch , junior hack saw blade , banian waste , distilled water for sec battery , lungs for cable 6mm, 8mm, 10mm, 25mm , cotton waste white , cotton waste colour , rust spray , bolt and nut all sizes m6 to m20 , rubber washer l o ring all size m6 to m20 , m seal 50 grams packet , anabond adhesives 20 gm , duracell aa 1.5v , duracell 9v pack of 2 nos , duracell d 1.5v , insulation tape , electroyte , sulphuric acid for sec battery h2so4 , xlr male and male connectors , telephone lead rj 11 , rj 11 connector 2 pin , rj 45 connector 8 pin , roger box for telephone

Central Government/Public Sector

TRN :34416001 | 13 May, 2025

Tender Value : 0

Baramulla - Jammu And Kashmir

Tender for gem bids for 110mm dia upvc swr pipe single socketed pipe type a in any length with rubber joint , upvc elbow 110mm , upvc hallf inch socket , pvc pipe 15mm , pvc pipe 20mm , nahani trap with jali 110x110mm , pvc l bend 3 inch dia , teflone tape , cotton thread feo massion , gi pipe 20 mm dia , gi socket 15mm dia , gi socket 20mm dia , gi nipple 75 x 15mm , gi union 15mm dia , gl tank nipple dia , gi elbow 15mm dia , gi pipe 15mm dia , gi pipe climps , gi plug 20 mm dia , gi union 20 mm dia , gi pipe 2 inch dia , gi round pipe 1.5 inch , gi tee 20mm dia , s s towel rail 600 mm , gi elbow 20mm , rotational moulded polythine water storage tank double layer 1000 ltrs capacity along with lid of same mtrls of tank , rotational moulded polythine water storage tank double layer 500 ltrs capacity along with lid of same mtrls of tank , rotational moulded polythine water storage tank double layer 200 ltrs capacity along with lid of same mtrls of tank , connection pipe 600 mm long , ceramic urinal pot , vitreous wash hand basin , vitreous european wc , vitreous china squatting pan,orissa patran size 580x 440 mm white with foot rest and p and s trap front or back inlet completed , pvc cistern 10 ltr capacity prayag , ppr tank connector 20mm with check nut and washer , 25mm socket suitable for 25mm dia ppr pipe confirming to is 1239 1989 , ppr socket 20 mm , ppr pipe 20mm , ppr union 20mm , ppr tee 20mm , ppr elbow 20mm , ppr female thread socket 20 mm dia , ppr female thread elbow suitable for 20mm dia , ppr tank connector 20 mm , prr pipe clamps 20mm , brass bib cock 20mm make prayag and cera , brass stop cock 20mm make prayag and cera , brass bip cock 15mm , self adhesive tape , ptmt piller cock 15mm , ptmt pillar cock 20mm dia

Central Government/Public Sector

TRN :34404893 | 12 May, 2025

Tender Value : 0

Jamshedpur - Jharkhand

Tender for gem bids for clearing jungle including uprooting of rank vegetation grass brush wood trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. "supplying chemical emulsion in sealed containers including delivery as specified. chlorpyriphos or lindane emulsifiable concentrate of 20 percent" "diluting and injecting chemical emulsion for post constructional anti termite treatment excluding the cost of chemical emulsion along external wall where the apron is not provided using chemical emulsion at the rate 7.5 litres or sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall and rodding etc. complete isto with chlorpyriphos or lindane e.c. 20 percent with 1 percent concentration" "earth work in excavation by mechanical means hydraulic excavator or manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m all kinds of soil." filling available excavated earth excluding rock in trenches plinth sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1.5 m supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete. "providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1 isto 3 isto 6 1 cement 3 coarse sand zone iii 6 graded stone aggregate 20 mm nominal size " "providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement all work up to plinth level isto 1 isto 1.5 isto 3 1 cement 1.5 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size " "reinforced cement concrete work in walls any thickness including attached pilasters buttresses plinth roof and string courses fillets columns pillars piers abutments posts and struts etc. above plinth level up to floor five level excluding cost of centering shuttering finishing and reinforcement 1 isto 1.5 isto 3 1 cement 1.5 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size " brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in foundation and plinth in cement mortar 1 isto 6 1 cement 6 coarse sand brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in cement mortar 1 isto 6 1 cement 6 coarse sand "half brick masonry with common burnt clay f .p .s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level. cement mortar 1 isto 4 1 cement 4 coarse sand " "centering and shuttering including strutting propping etc. and removal of form for foundations footings bases of columns etc. for mass concrete" "centering and shuttering including strutting propping etc. and removal of form for suspended floors roofs landings lintals beams balconies and access platform" "steel reinforcement for r.c.c. work including straightening cutting bending placing in position and binding all complete upto plinth level thermo mechanically treated bars of grade fe 500d or more make sail or tata or jindal " "15 mm cement plaster on the rough side of single or half brick wall of mix isto 1 isto 6 1 cement isto 6 fine sand rates for external plastic are for height upto 10m from ground level in less otherwise stated cement make nuvoco lafarge or ultratech or acc or as per direction of eic " "12 mm cement plaster of mix 1 isto 6 1 cement isto 6 fine sand rates for external plastic are for height upto 10m from ground level in less otherwise stated cement make nuvoco lafarge or ultratech or acc or as per direction of eic " "6 mm cement plaster of mix 1 isto 3 1 cement 3 fine sand rates for external plastic are for height upto 10m from ground level in less otherwise stated cement make nuvoco lafarge or ultratech or acc or as per direction of eic " neat cement punning. "finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade new work two or more coats applied at the rate 1.43 ltr or 10 sqm over and including priming coat of exterior primer applied at the rate 2.20 kg or 10 sqm make dulux or burger or asian paints or as per direction of eic" white washing with lime to give an even shade new work three or more coats mix with fevicol ddl and robin blue or as per direction of eic "painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. preferable make dulux or burger or asian paints or as per direction of eic make dulux or burger or asian paints or as per direction of eic" making plinth protection 50mm thick of cement concrete 1 isto 3 isto 6 1 cement 3 coarse sand zone iii 6 graded stone aggregate 20 mm nominal size over 75mm thick bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling and dressing and finishing the top smooth "providing and fixing angle iron frames for doors windows and ventilators of mild steel angle sections of size 35x35x5 mm joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing t iron frame or to the wall with dash fastener including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer all complete as per the direction of engineer in charge. make sail or tata or jindal " "providing and fixing isi marked flush door shutters conforming to is isto 2202 part i decorative type core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including isi marked stainless steel butt hinges with necessary screws" "structural steel work in single section fixed with or without connecting plate including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete. make sail or tata or jindal " 25 mm thick pvc flush door shutters made out of a one piece multi chamber extruded pvc section of the size of 762 mm into 25 mm or less as per requirement with an average wall thickness of 1 mm plus or minus 0.3 mm . pvc foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. m.s. tube having dimensions 19 mm into 19 mm and 1.0 mm plus or minus 0.1 mm is inserted along the hinge side of the door. core of the door shutter should be filled with high density polyurethane foam. the top and bottom edges of the shutter are covered with an end cap of the size 25 mm into 11 mm. door shutter shall be reinforced with special polymeric reinforcements as per manufacturer specification and direction of engineer in charge to take up necessary hardware and fixtures. stickers indicating the locations of hardware will be pasted at appropriate places "providing and fixing isi marked oxidised m.s. sliding door bolts with nuts and scrows etc. complete .as per the direction of directions of engineer in charge.300x16 mm " "providing and fixing ist quality ceramic glazed wall tiles conforming to is 15622 thickness to be specified by the manufacturer of approved make somany or kajaria or nitco in all colours shades except burgundy bottle green black of any size as approved by engineer in charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 isto 3 1 cement 3 coarse sand and jointing with grey cement slurry at the rate 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. make isto somany or kajaria or nitco or asian or as per direction of eic" "providing and laying vitrified floor tiles in different sizes thickness to be specified by the manufacturer with water absorption less than 0.08percent and conforming to is 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1 isto 4 1 cement 4 coarse sand jointing with grey cement slurry at the rate 3.3 kg or sqm including grouting the joints with white cement and matching pigments etc. complete. size of tile 600x600 mm make somany or kajaria or nitco or asian or as per direction of eic" "providing and fixing water closet squatting pan indian type w.c.pan with 100 mm sand cast iron p or s trap 10 litre low level white p.v.c. flushing cistern including flush pipe with manually controlled device handle lever conforming to is 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests preferable make hindware or parrywair or hindustan or cera or direction of eic" "providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and c.p. brass spreaders with brass unions and g.i clamps complete including painting of fittings and brackets cutting and making good the walls and floors wherever required one urinal basin with 5 litre white p.v.c. automatic flushing cistern preferable make hindware or parrywair or hindustan or cera or direction of eic" "providing and fixing wash basin with c.i. brackets 15 mm c.p. brass pillar taps 32 mm c.p. brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require isto white vitreous china wash basin size 630x450 mm with a single 15 mm c.p. brass pillar tap" "providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete. semi rigid pipe 32 mm dia" providing and fixing 600x450 mm beveled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with c.p . brass screws and washers complete. "providing and fixing brass bib cock of approved quality 15 mm nominal bore" "providing and fixing brass stop cock of approved quality 15 mm nominal bore" providing and fixing circular or hexagonal cast iron or m.s. sheet box for ceiling fan clamp of internal dia 140 mm 73 mm height top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron or m.s. sheet box by means of 3.3 mm dia round headed screws one lock at the corners. clamp shall be made of 12 mm dia m.s. bar bent to shape as per standard drawing. providing and fixing isi marked oxidised m. s handles conforming to is 4992 with necessary screws etc. complete 125 mm providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete. providing and fixing is 12817 marked stainless steel butt hinges heavy weight with stainless steel screws etc. complete 100x60x2.50 mm "providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. for external work a. 15 mm dia nominal bore preferable make tata or jindal or as per direction of eic" "providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. for external work b. 20 mm dia nominal bore preferable make tata or jindal or as per direction of eic" providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. for external work d. 50 mm dia nominal bore preferable make tata or jindal or as per direction of eic "providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is 13592 type a including jointing with seal ring conforming to is 5382 leaving 10 mm gap for thermal expansion single socketed pipes. 110 mm diameter" "providing and fixing gun metal gate valve with c.i. wheel of approved quality screwed end isto 20 mm nominal bore" "providing and fixing gun metal gate valve with c.i. wheel of approved quality screwed end isto 50 mm nominal bore" providing and placing on terrace at all floor levels polyethylene water storage tank is isto 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank. providing and fixing 100 mm sand cast iron grating for gully trap constructing brick masonry chamber for underground c.i. inspection chamber and bends with bricks in cement mortar 1 isto 4 1 cement 4 coarse sand c.i. cover with frame light duty 455x610 mm internal dimensions total weight of cover with frame to be not less than 38 kg weight of cover 23 kg and weight of frame 15 kg r.c.c. top slab with 1 isto 1.5 isto 3 mix 1 cement 1.5 fine sand isto 3 graded stone aggregate 20 mm nominal size foundation concrete 1 isto 5 isto 10 1 cement 5 fine sand 10 graded stone aggregate 40 mm nominal size inside plastering 12 mm thick with cement mortar 1 isto 3 1 cement isto 3 coarse sand finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets isto with common burnt clay f.p.s. non modular bricks of class designation 7.5 "constructing masonry chamber 30x30x50 cm inside in brick work in cement mortar 1 isto 4 1 cement isto 4 coarse sand for stop cock with c. i. surface box 100x100 x75 mm inside with hinged cover fixed in cement concrete slab 1 isto 2 isto 4 mix 1 cement isto 2 coarse sand isto 4 graded stone aggregate 20 mm nominal size i or c necessary excavation foundation concrete 1 isto 5 isto 10 1 cement isto 5 fine sand isto 10 graded stone aggregate 40mm nominal size and inside plastering with cement mortar 1 isto 3 1 cement isto 3 coarse sand 12mm thick finished with a floating coat of neat cement complete as per standard design isto with common burnt clay f.p.s. non modular bricks of class designation 7.5" providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level isto 1 isto 1.5 isto 3 1 cement isto 1 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and s.w. drain pipe 100 mm diameter 1.8 m long complete as per standard design. with common burnt clay f.p.s. non modular bricks of class designation 7.5 "cement concrete flooring 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate" "providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm plus 0.05 percent total coated thickness zinc coating 120 grams per sqm as per is 277 in 240 mpa steel grade 5 to 7 microns epoxy primer on both side of the sheet and polyester top coat 15 to 18 microns using self drilling or self tapping screws complete ridges plain 500 to 600mm " "providing and fixing precoated galvanised iron profile sheets size shape and pitch of corrugation as approved by engineer in charge 0.50 mm plus 0.05 percent total coated thickness with zinc coating 120 grams per sqm as per is 277 in 240 mpa steel grade 5 to 7 microns epoxy primer on both side of the sheet and polyester top coat 15 to 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin charge. the sheet shall be fixed using self drilling or self tapping screws of size 5.5 x 55 mm with epdm seal complete upto any pitch in horizontal or vertical or curved surfaces excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required." providing and fixing of glass panes with putty and glazing clips in steel doors and windows all complete with 4mm thick glass panes etc. complete. supply of led tube light fittings .make c.g. or philips fixing of led tube light fittings including supply of all hardwares as required. led fitting will be supplied by contractor. make c.g. or philips supply of 48 sweep ceiling fan complete with down rod.clamp canopy etc. fixing of 48 sweep ceiling fan complete with down rod.clamp canopy etc.fan hardwares required for fixing for i.e. nut bolts clamp screws etc wiil be supplied by contractor. supply and fixing of stepped type electronic fan regulator on existing switch board. wiring for light point fan point exhaust fan point with 1.5 sqmm frls pvc insulated copper conductor single core cable in consield with modular switch modular plate suitable gi box and earthing the point with 1.5 sqmm frls pvc insulated copper conductor cable as required. supply of frls pvc insulated copper conducter single core cable of size 6 sqmm. make havells or kei or polycab or national wiring for circuit or submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor single core cable in consield or recessed medium class pvc conduit in concield as required 2 x 6 sqmm plus 1 x 6 sqmm earth wire. all the three colours should be red blue and green supply and fixing of utility db p or s 20a dp metal plug and socket distribution board grey make anchor or havells supply and installation of three phase industrial box with 32 amp 4 pole mcb and 5 pin top plug. make neptune or reputed make supply of frls pvc insulated copper conducter single core cable of size 10 sqmm. make havells or kei or polycab or national wiring for circuit or submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor single core cable in surface or recessed medium class pvc conduit in concield as required 4 x 10 sqmm + 1 x 10 sqmm earth wire.all the five colours should be red blue yellow black and green preparation of earth pit with supply of all materials including 3m long 3.64mm thick perforted gi tube with salt and charcol in alternate layer and brick chamber at the top with chequered plate 6mm thick as per is 3043 with latest. supply and laying 25mm x 5 mm gi strip at 0.5 meter below ground or wall including connection with electrode with db. supply of all hardware are in scope of contractor supply ans fixing of surface mounting vertical type 415 volts tpn mcb distribution board of sheet steel dust proctected duly power coated painted inclusive 200 amp tinned copper bus bar common neutral link earth bar din bar for mounting mcb with provision of 100 amp tpn mccb as incomer interconnection between incomer mccb and busbar. supply and fixing of 5 to 32 amp rating 240 or 415 volt mcb suitable as per load. supply and fixing of four pole 100 amp rating 415 volt 16 ka mccb . laying of 1.1kv grade pvc al.cable of size 2 or 3 or 3.5 or 4c 2.5 or 6 or 10 or 16 or 25 or 35 sq.mm in underground trench of 760mm deepx760mm wide in single tier formation including trench excavation and back filling with bricks 15brick or m and sand protection route marker. road or concreete or bolder cutting and finishing the road to its original shape are in the scope of the contractor. supply and fixing of street light on wall including supply of all necessaryu hardware for fixing of fitting on wall. supply and fixing of bulk head fitting on wall including supply of all necessaryu hardware for fixing of fitting on wall. supply installation and commissioning of exhaust fan of size 300 mm dia. this includes cutting of wall and finishing and supply of hardware like nut bolts etc. make crompton

Central Government/Public Sector

TRN :34404895 | 08 May, 2025

Tender Value : 0

Port Blair - Andaman And Nicobar Islands

Tender for gem bids for galvanised ms bolt and nut 1o x 4omm , gi bolt and nut 12 x 40mm , gi bolt and nut 14 x45mm , gi bolt and nut 14x 70mm , gi bolt and nut 16x40mm , gi bolt and nut 16x70mm , grommets metallic 754 mm head of barrel under flange 1406m , cllp jublee 58 to 78 , ms washer flat rd 58 id 1116 od 1- 38 thk 0128 , gi wire mesh 3 wide 16 mesh 28 swg , copper washer id 1332 od 1316 thk 132 , power saw blade 450mm x35mm x 2mm matereal high speed steel , fibre glass sewing thread 116 , neoprene rubber 18 , neoprene rubber sheet 532 4mm , neoprene rubber synthetic 1 x 2 x 14m , neoprene rubber sheet 2 mm thk , insul tape thermal glass sealing tapewidth 50mm , glass fibre cloth 05mm thick width 1 mtr , ceramic fibre blanket 762m x 610mm x 25mm , cotton tape 1 , gt thread reel sewing thread extra strong gtx549 , water proof emery paper 180 9 x11 , paper abrasive 9x 11 230x230mm , penetrnat developer white spray type 280ml aerosol , cleaner pentrent remover , dye penetrant red , abrush varnish 3 75mm , flux welding silver solder , solder silver brazing alloy ribbon 5mmx125mm , bolt with nut m6x20mm , bolts black steel hex hd m8 x 45mm with nut , bolt steel m12x90mm , bolts black steel hex hd m14 x 60mm with nut , bolt machine 46m 10x40mm , bolt machine hex head m24x 90mm , nail cpcsksq 50x315mm , nail steel lath cat 12mm shape and size as per dpin1171 , nail steel wire rd 25mmx2mm chest quared hd , nail swrd 30x2mm , nail steel round 1-12 , nail steel wire 52 10s , nail steel wire round 100mm x5mm chequered head , nails steel wire round shequer 125 mm x 55mm , gland packing hollow core size 25mm , hinge brass butt 40mm type expruded brass butt hinges male , hinge brass butt 75mm , hinge steel butt 75 mm , hinge steel butt 100 mm , hasp with staple steel 75mm wire type , acetone , alcohol ethyl absolute in 1ltr bottle , french polish orange flash pt 44-150 degree centigrade , solution rust remover def 37 , steel putty quick settlng , wear resistant putty , corrosion inhibitor indion 5547 , poly vinyl. acetate dispersion based adhesive is 4835

Central Government/Public Sector

TRN :34404901 | 19 May, 2025

Tender Value : 0

Bardhaman - West Bengal

Tender for gem bids for 12x40mm hdg hexa nut and bolts full thread , 12x50mm hdghexa nut and bolts full thread , 12x65mm hdg hexa nut and bfull thread , 12mm hdg round pack washer-3 mm , 16x35mm hdg hexa nut and bolts with 23mm thread , 16x40mm hdg henut and bolt with 23mm thread , 16x45mm hdg hexanut and bwith 23mm thread , 16x50mm hdg hexa nut and bolts with 23mthread , 16x55mm hdg hexa nut and bolts with 23mm thread 16x60mm hdg hexa nut and bolts with 23mm thread , 16x65mhdg hexa nut and bolts with 23mm thread , 16x70mm hdg henut and bolts with 23mm thread , 16x75mm hdg hexa nut andbolts with 23mm thread , 16x80 mm hdg hexa nut and bolts w23mm thread , 16x85mm hdg hexa nut and bolts with 23mm thread , 16x175mm hdg step bolts , 16mm spring washer eg ,16mm hdg round pack washer-3 mm , 16mm hdg round packwasher-5 mm , 16mm hdg round pack washer-6mm , 16mm hround pack washer-8mm , 16mm hdg round pack washer-10m24mm spring washer-eg , 24 x 90 mm hdg hexa nut and boltswith 30mm thread , 24 x 95 mm hdg hexa nut and bolts with 30mm thread , 24 x 100 mm hdg hexa nut and bolts with 30mthread , 24 x 105 mm hdg hexa nut and bolts with 30mm thre24 x 110 mm hdg hexa nut and bolts with 30mm thread , 16x55mm hdg hexa nut and bolts full thread , 16x75mm hdghexa nut and bolts full thread , 16x65mm hdg hexa nut and bfull thread , 16x65 hdg hexa nut and bolts with 40 mm thread12x95mm hdg hexa nut and bolts full thread , 12mm spring washer eg , 16x40mm hdg hexa nut and bolts with 23mm thre, 16x85 mm hdg hexa nut and bolts with 23mm thread , 16 x 7mm hdg hexa nut and bolts full thread , 24mm hdg round pawasher-3 mm , 24mm hdg round spring washer , 12x55mm hdhexa nut and bolts full thread , 16x90mm hdg hexa nut and bwith 23mm thread , 24 x 80 mm hdg hexa nut and bolts with 30mm thread , 24mm hdg round pack washer-5mm

Central Government/Public Sector

TRN :34403282 | 08 May, 2025

Tender Value : 0

North 24 Paragana - West Bengal

Tender for gem bids for o ring sealing ring for 13 & 15 sealing ring for 4 valve inlet union screw spring feed pump plunger pressure spindle retainer screw plug feed pump repair kit for fip gear ring boit plug adaptor flywheel bolt bolt fly wheel assy gear washer bolt bolt dowel pin plug seal front bushing bushing pin , spring pointer bolt bolt bolt dowel pin bolt cover front gear assy idler gear shaft washer washer bolt plate shaft gasket , tach .housing hose hose o ring seal seal oil spacer bearing ball bearing ball shaft clip assy key bolt bolt bolt bushing clamp clamp gear housing joint bolt tube tube, oil supply nipple bolt key screw shaft tube injection no 1 tube injection no 2 tube injection no 3 tube injection no 4 tube injection no 5 tube injection no 6 washer adapter bracket high pressure pipe set nut cartidge cartridge fuel filter hose fuel pre filter assy spacer bolt bolt head bracket gasket gasket screw hose overhaul kit for pe6pas70 fip cylinder block gasket( kit--k2) cylinder head gasket (kit--k1) gasket o-ring o-ring seal, oil flat seal ring gasket gasket sealing ring gasket gasket washer, 2.50 mm spring nut, cap screw, stroke adjustng spring, speed control capsule ,full stop key inlet union throttle screw joint key,woodruff pin, stop screw washer capsule ,full stop lever, adjusting nut governor assy. screw,adjusting spring, inner spring, outer spring, start bushing , lever cover, governor level, swivelling assy plug, screw shaft, liver suporting washer, snap closing cover round nut starting spring (with sleeve) bolt bolt bolt flyweight assy. housing plate, thrust washer, 0.10 mm washer, 0.10 mm washer, 0.10 mm washer, 0.20 mm washer, 0.20 mm washer, 0.30 mm washer, 0.30 mm washer, 0.40 mm washer, 1.00 mm gasket hose cap wire screw solenoid 24v -4st clamp heater air bolt bolt bolt bolt connector , air intake manifold intake bracket pin bearing needle ball joint rod end snap ring bolt nut lever rod screw element, oil cooler plug washer cover cover oil cooler assy plug cartridge oil filter spring , oil filter snap ring head oil filter bolt spacer spacer bracket spring,inner spring,outer valve,adapter bolt bracket clip plug

Related Searched Keywords : round washer

List of round-washer Tenders

Get round washer Tender Alert...

Related Searched Keywords : round washer

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us