Indian Tenders Tender information of India
Global Tenders International Tender information
Projects Project information of India
Tender Awarded Tender awarded information
Sub-Contractor Vendor information of India
Pay Online
Register now
Login
Contact Info All India : 9276083333 / 9274315555 South India : 9274315555

Filters

List of recess-mounting-light Tenders

List of latest recess-mounting-light Tenders in Indian Tenders. Click on any recess-mounting-light Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for recess-mounting-light Tenders.

All-Tenders (6)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

State Government

TRN :35766126 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Dausa - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Central Government/Public Sector

TRN :35756804 | 10 Nov, 2025

Tender Value : 0

Dimapur - Nagaland

Tender for gem bids for universal batten with g-13 lamp holder for t-8 lamps 20watt single side connection as per zonal specification led2 feet x2 feet 42 watt electronic drive recess mountedfitting warmwhite oblique coolday white make philipsoblique wipro oblique cg oblique bajaj oblique surya andeqivalent ultra modern recess mounting luminaire highbrightness leds 42 watt led 6000k led green lamp 05watt make philips oblique wipro oblique cg oblique bajajoblique surya and equivalent led white lamp 05 wattmake philips oblique wipro oblique cg oblique bajaj obliquesurya and equivalent ledyellow lamp 05 watt makephilips oblique wipro oblique cg oblique bajaj oblique suryaand equivalent led red lamp 05 watt make philipsoblique wipro oblique cg oblique bajaj oblique surya andequivalent runway lamp 200watt as per zonalspecification aviation lights alumimium led neon as perzonal specification globe led as per zonal specification city 3 decorative wall light fitting make philips oblique wiprooblique cg oblique bajaj oblique surya and equivalent mcbdb 2 way make siemens oblique l and t oblique hageroblique abb and equivalent isolator 100 amps 4 pole tpnmake siemens oblique l and t oblique hager oblique abband equivalent change over swtich 63 amp 415 volt makehavells oblique legrand oblique abb and equivalent cableflexible copper conductor 23 oblique 0076 make finolexoblique rr kable oblique kei oblique polycabe and eqivalentas per buyer reqmt cable flexible copper conductor 14oblique 0076 make finolex oblique rr kable oblique keioblique polycabe and eqivalent as per buyer reqmt pvcround cable 3 core 23 oblique 0076 make finolex obliquerr kable oblique kei oblique polycabe and eqivalent pvcround cable 3 core 40 oblique 0076 make finolex obliquerr kable oblique kei oblique polycabe and eqivalent bid number gem2025b6797642 dated 31-10-2025 bid document1 120 1 1 250mm exhaust fan plastic body make bajaj oblique cgoblique sudhir and eqivalent, 200mm exhaust fan plasticbody make bajaj oblique cg oblique sudhir and eqivalent, 150mm exhaust fan plastic body make bajaj oblique cgoblique sudhir and eqivalent, ht barrel fuse 20 amp pkt of10 nos make denson oblique rashtriya oblique m-3 andequivalent, ht barrel fuse 10 amp 10nos pkt as per zonalspecification, barrel fuse suitable for ht 11 kv ratedcapacity 60 amps as per zonal specification, ht barrel fuse5 amp 10 nos pkt as per zonal specification, ht barrel fuse15 amp 10 nos pkt as per zonal specification, capacitor forcelling fan 2.5 mfd make universal oblique anchor andeqivalent, lugs copper alloy 150 sqmm make denseenoblique raychem oblique m-3 and equivalent, lugs copperalloy 185 sqmm as per zonal specification, lugs copperalloy 95 sqmm as per zonal specification, lugs copperalloy 120 sqmm as per zonal specification, lugs copperalloy 70 sqmm as per zonal specification, lugs copperalloy 50 sqmm as per zonal specification, lugs copperalloy 35 sqmm as per zonal specification, lugs copperalloy 25 sqmm as per zonal specification, lugs copperalloy 240 sqmm as per zonal specification, lugs copperalloy 400 sqmm as per zonal specification, plug top 3 pin 5oblique 6 amp make anchor oblique schnieder obliquehager and equivalent, pinao socket 16 amp, 5 pin makeanchor oblique schnieder oblique hager and equivalent, 5amps socket make anchor oblique schnieder oblique hagerand equivalent, pvc batton holder make anchor obliqueschnieder oblique hager and equivalent, pvc angle holdermake anchor oblique schnieder oblique hager andequivalent, pvc pendent holder make anchor obliqueschnieder oblique hager and equivalent, modular fanregulator 1200 oblique 1400 mm make as per sample, thread bulb big led as per zonal specification, threadbulb small led make philips oblique wipro oblique cgoblique bajaj oblique surya and equivalent, pvc ceiling rose2 oblique 3 terminal make anchor oblique schnieder obliquehager and equivalent, insulation tape roll 38 mm x 25 mlong as per zonal specification, insulation tape roll 20 mmx 25 m long as per zonal specification, insulation tape roll15 mm x 25 m long as per zonal specification, insulationtape roll 25 mm x 25 m long as per zonal specification, ampere tape 15mm width as per zonal specification, pvcswitch board 8 feet feet x6 feet feet make presto plastoblique finolex oblique kalinga and equivalent, pvc switchbd 4 inch x4 inch make presto plast oblique finolex obliquekalinga and equivalent, pvc switch bd 7 inch x 4 inch makepresto plast oblique finolex oblique kalinga and equivalent, pvc switch bd 12 inch x10 inch make presto plast obliquefinolex oblique kalinga and equivalent, pvc switch bdrectangular 8 inch x10 inch make presto plast obliquefinolex oblique kalinga and equivalent, pvc casing capping15mm make presto plast oblique finolex oblique kalingaand equivalent, pvc cassing capping 20 mm make prestoplast oblique finolex oblique kalinga and equivalent, pvccasing capping 25 mm x 12mm make presto plast obliquefinolex oblique kalinga and equivalent, pvc casing capping32 mm make presto plast oblique finolex oblique kalingaand equivalent, pvc conduit pipe 25 mm make presto plastoblique finolex oblique kalinga and equivalent, pvcconduit pipe 20 mm make presto plast oblique finolexoblique kalinga and equivalent, pvc flexible pipe 20 mmcorrugated make presto plast oblique finolex obliquekalinga and equivalent, pvc flexible pipe 25 mm //bid details2 / 120 corrugated make presto plast oblique finolex obliquekalinga and equivalent, pvc flexible pipe 32 mmcorrugated make presto plast oblique finolex obliquekalinga and equivalent, tarpentine oil make asian andequivalent, paint og of 04 ltr container make asian obliqueberger oblique dulux and equivalent, paint black of 04 ltrcontainer make berger oblique asian oblique shalimar andequivalent, synthetic enamel paint white of 04 ltrcontainer 1st grade make dulux oblique berger obliqueasian, timber scantling 1st class 50x50mm teak wood, timber scantling 1st class 100x50mm teak wood, plywoodcommercial bwr grade 7 feet x3 feet x12mm thick makearchid oblique globe oblique green ply and equivalent, prelaminated mdf board 8 feet x4 feet x 18 oblique 20 mmmake bhutan oblique novapam oblique green ply andequivalent, block board bwr 8 feet x4 feet x19 mm thickmake archid oblique globe oblique green ply and equivalent, ply wood bwr 8 feet x 4 feet x 12 mm thick make archidoblique globe oblique green ply and equivalent, ply woodbwr 8 feet x 4 feet x 6mm thick archid oblique globeoblique green ply and equivalent, ply wood one side teakface size 8 feet x 4 feet x 4mm thick archid oblique greenply and equivalent, ply wood bwr 8 feet x 4 feet x 4mmthick archid oblique globe oblique green ply and equivalent, pre-laminated mdf board 8 feet x4 feet x12mm bhutanoblique novapam oblique green ply and equivalent, headboard pf bed ply top as per zonal specification, foot boardof bed ply top as per zonal specification, timber scantling1st class 75mm x 40mm teak wood, timber scantling 1st coblique h oblique w 30mm x 25mm teak wood, timberscantling 1st class 25x50 mm teak wood, laminated sheet8 feet x 4 feet x 1 mm thick make green ply oblique kitoblique archid and equivalent, beading teak wood size4mm x40mm as per zonal specification, teak woodenbeading 12x25mm, teak wood beading 20x25mm, teakwooden beading half round 20mm as per zonalspecification, teak wooden beedings1 inch x1 inch x6 feetlong as per zonal specification, looking mirror size 365mm x 1220mm x 5mm thick make modi guard andequivalent, looking mirror size 380 mm x 760mm x 5mmthick modi guard and equivalent, mirror of size1200x600x5mm thick modi gurad oblique gold fish andequivalent, glass panes size 3 feet x2 feet x5mm modiguard and equivalent, pvc beading 4mm x 20mm as perzonal specification, pvc beading 4mm x 15mm as perzonal specification, pvc seat for chair varamdah as perzonal specification, pvc seat for chair dining jco feet soblique ors as per zonal specification, nails wire 75mm asper zonal specification, nails wire 100mm as per zonalspecification, nails wire 40mm as per zonal specification, nails wire 60mm as per zonal specification, nails wire50mm as per zonal specification, nails wire 25mm as perzonal specification, nailes wire 150 mm as per zonalspecification, ms screw 35 mm as per zonal specification, ms screw 50 mm as per zonal specification, ms screw20mm as per zonal specification, ms screw 25 mm as perzonal specification, ms piano hinges 50mm x 5 feet longeach pkt 100 nos as per zonal specification, steel screw35mm each pkt 100 nos as per zonal specification, steelscrew 3 oblique 4 inch flat head as per zonal specification, machine screw full thread 35mm each pkt 100 as per zonalspecification, machine screw full thread 20mm each pkt100 as per zonal specification, machine screw 75mm withnut 100 nos of pkt as per zonal specification, hinges ms 50 //bid details3 / 120 mm to 100 mm as per zonal specification, hexa bladedouble edge as per zonal specification, gi check nut32mm as per zonal specification, gi lock 6 levers foralmirah four 04 holes godrej pattern and equivalent, gilock 6 levers for almirah two 02 holes godrej pattern andequivalent, lock for cup board godrej oblique norexoblique priya and equivalent, gi elbow 3 way 32 mm as perzonal specification, thinner 4 ltr in each container asianand equivalent, varnish 4 ltr container asian andequivalent, touch wood 1 ltr container asian andequivalent, dendrite 1 kg in container pidilite andequivalent, fevicol make - pidilite and equivalent, copalvarnish make - peacock and equivalent, pila mati as perzonal specification, basanti colour powder pkt 10 gms asper zonal specification, black colour powder as per zonalspecification, brown clolur powder as per zonalspecification, sand paper no 60 10 mtr as per zonalspecification, panel pin 25mm as per zonal specification, panel pin 20mm as per zonal specification, hasp andstaple steel 100mm as per zonal specification, slidingwheel for glass shutter as per zonal specification, aluminium peg as per zonal specification, cp knob 40 mmas per zonal specification, tapestry cloth best quality asper zonal specification, cloth malmal white 1.2 mtr wideas per zonal specification, cloth green blaizer1.5 mtr asper zonal specification, latherised rexin cloth best qualityas per zonal specification, nylon tape newar 50 oblique 55mm width. best quality as per zonal specification, bowhandle 100 mm as per zonal specification, broom sticks forsweeping as per zonal specification, hard rubber shoe forchair verandah as per zonal specification, hard rubbershoe for steel table as per zonal specification, aluminiumsheet 22 gauge as per zonal specificationuniversal batten with g-13 lamp holder for t-8 lamps 20watt, led 2x2 42 watt electronic drive recess mounted, ultra modern recess mounting luminaire leds 42 watt led6000k., led green lamp 0.5 watt make :philips/wipro/cg/bajaj /surya, led white lamp 0.5 wattmake : philips/wipro/cg/bajaj /surya, ledyellow lamp 0.5watt make : philips/wipro/cg/bajaj /surya, led red lamp0.5 watt make : philips/wipro/cg/bajaj /surya, runwaylamp 200watt as per zonal specification, aviation lightsalumimium led neon as per zonal specification, globeled as per zonal specification, city 3 decorative wall lightfitting make : philips/wipro/cg, mcb db 2 way make :siemens/l&t/hager/abb & equivalent, isolator 100 amps 4pole tpn make : siemens/l&t/hager/abb, change overswtich 63 amp 415 volt make : havells/legrand, cableflexible copper conductor 23/.0076 as per buyer reqmt, cable flexible copper conductor 14/.0076 as per buyerreqmt, pvc round cable, 3 core 23/.0076 make : finolex/rrkable/kei, pvc round cable, 3 core 40/.0076 make :finolex/rr kable/kei, 250mm exhaust fan plastic bodymake:bajaj/cg/sudhir & eqivalent, 200mm exhaust fanplastic body make : bajaj/cg/sudhir & eqivalent, 150mmexhaust fan plastic body make : bajaj/cg/sudhir &eqivalent, ht barrel fuse 20 amppkt of 10 nos make :denson/rashtriya/m-3, ht barrel fuse 10 amp10nos pktas per zonal specification, barrel fuse suitable for ht 11kv rated capacity 60 amps, ht barrel fuse 5 amp10 nospkt as per zonal specification, ht barrel fuse 15 amp10nos pkt as per zonal specification, capacitor for cellingfan 2.5 mfd make : universal/anchor, lugs copper alloy150 sqmm make : denseen/raychem/m-3 , lugs copperalloy 185 sqmm as per zonal specification, lugs copperalloy 95 sqmm as per zonal specification, lugs copper //bid details4 / 120

Central Government/Public Sector

TRN :35723825 | 07 Nov, 2025

Tender Value : 0

Chandigarh Ut - Chandigarh

Tender for gem bids for led luminaire for road and street lights v2 conformingto is 10322 part 5 section 3 q3 led garden light v2q2 led batten q2 xlpe cable for working voltages upto and including 11 kv as per is 7098 part 1 q2 ledtube light retrofit type q2 led luminaire forfloodlight v2 conforming to is 10322 part 5section 5q3 led bulkhead light q3 self ballasted led lampsfor general lighting services v2 conforming to is 16102q2 molded case circuit breakers mccb as per is iec60947 q3 mcb - miniature circuit - breakers for acoperation as per is iec 60898 part 1 q2 piano typemodular domestic fan regulator as per is 11037 q3 piano type modular domestic electrical sockets - is 1293q3 pvc copper cable single core and multi core circularsheathed cord with flexible conductor v2 as per is 694q2 modular piano type domestic electrical switches asper is 3854 q3 elecric bells and accessories as per is2268 q3 mcb disturbuisation box tp 12 way ledinverator batten 25 watt led inverator batten 30 watt pvc copper cable flexible 6 sq mm single core led streetlight 90 watt inverter di mmable ir sensor pvc coppercable flexiable 2 point 5 sq mm x 3 core led ceiling fitting2 inch x 2 inch recess mounting 36 watt pvc copper cableflexiable single core 10 sq mm aluminum cable pvcinsulated twin core 16 sq mm pvc copper cable flexiablesingle core 4 sq mm sluice valve pn 1 point 6 size 250 mm cable pvc flexible copper conductor 2 point 5 sqmm singlecore nrv 150 mm cable flat aluminum conductor 2 core10 sq mm gun metal gate valves size 15 mm ledfountain light coloured 6 watt pvc connection pipe 15 x450 mm long with brass heating element for geyser 2000watt mcb tpn 32 amp b curve pvc connection pipe 15 x600 mm bleaching powder heating element for geyser bid number gem2025b6810121 dated 28-10-2025 bid document1 121 1 1 1500 watt, mcb distribuation box 8 way, sluice valve pn 1point 6 size 100 mm, modular socket 20 amp, ball valve 40mm brass, switch change over switch 4 pole 100 amp, ballvalve 50 mm brasss, high strengh calcium based chlorinegranules chorination chemical 25 kg bags, sluice valve pn1 point 6 size 150 mm, ball valve 25 mm brass, pvc tape20 mm x 25 mtr a, led inverter street light 60 watt, isolator 63 amp tpn, gun metal gate valves size 20 mm, multicore wire pvc copper of size 2 point 5 sq mm, ballvalve 63 mm brass, ball valve brass of size 20 mm, frameplate 6 module, modular socket 6 amp, modular fanregulator switch type, condenser 2 point 5 mfd, gi union50 mm, sluice valve pn 1 point 6 size 80 mm, isolater 63amp with encloser, rccb 2 pole 63 amp 300 ma, pvc flatcable aluminum 6 sqmm twin core 100 mtr, mcb spn 40amp b curve, switch board boxes 6 modular, thimblecopper of size 150 sqmm, isolator 40 amp tp, modularswitch 20 amp one way, switch 6 amp one way, gi union40 mm, fan pvc ventilator 10 inch sweep, gi nipple 40 x150 mm long, gi socket 50 mm, capacitor 3 point mfd, pvc gang box 6 amp, gi tee 50 mm, gi nipple mediumgrade 40 mm dia, frame plate 8 module, frame plate 3module, thermostat switch for geyser, gi tee 40 mm, gielbow 50 mm, gi socket 80 mm, capacitor 4.0 mfd, ceilling rose, gun metal gate valves size 25 mm, gi nipplemedium grade 50 mm dia x 150 mm, gi elbow 80 mm, frame plate with matching cover plate 2 modular, plugmetal clad 20 amp, frame plate 4 module, gi elbow 40 mm, gi nipple 40 x 100 mm, gi elbow 20 mm, gi socket 40mm, gi nipple 40 x 50 mm long, bulb 100 wattincandesent, pvc gang box 5 amp, gi elbow 25 mm, blanking plate, thimble aluminium size 35 sqmm pack of50, thimble aluminium size 70 sqmm pack of 50, thimblealuminium size 95 sqmm pack of 50, thimble aluminiumsize 120 sqmm pack of 50, thimble aluminium size 185sqmm pack of 50, gi plug 15 mm, gi plug 20 mm, gi plug25 mm, gi plug 40 mm, gi plug 50 mm //bid details2 / 121

Central Government/Public Sector

TRN :35714868 | 07 Nov, 2025

Tender Value : 0

Panchkula - Haryana

Tender for gem bids for misc, led batten with battery invertor q3 mcb - miniaturecircuit - breakers for ac operation as per is iec 60898part 1 q2 molded case circuit breakers mccb as peris iec 60947 q3 led batten q2 led garden lightv2 q2 xlpe cable for working voltages up to andincluding 11 kv as per is 7098 part 1 q2 pvc flatcable aluminium conductor with pvc insulation and sheathas per is 694 q3 led bulb with battery as per is 16102q3 led single side connection tube rod 20 watt 4 feet copper tube terminals thimble 35 sqmm pkt of 50 nos switch 5 amp 1 way modular fan modular regulatorsocket type non modular led double cap tube rodaluminium body 10 watt 2 feet white led picture light10watt rgb led bulb 9 watt b22 led bulb 7 watt warmwhite b22 fan capacitor 2 point 5 mfd decorative fancywall light with led bulb 9 watt ww switch 6 amp 2 waypt decorative led bed side decorative lamp with bulb2x9w led bulb15 watt b22 led bulb 5 watt candle bigthread ww e27 fan modular regulator socket typemodular type switch modular 20 amp 2 way cable pvcflat aluminium 2 core 6 sqmm roll of 90mtr switch 20amp pt non modular flood light led type with hangingarrangement 30w flood light led type with hangingarrangement 50w led downlighter round shape 12 watt3000k back lit metal plug top with socket of capacity 16amp for ac led spot light 12w frame plate 4 modular frame plate 8 modular squre led downlighter squre shape15 watt 6500k back lit holder bulb angular type currentdriver suitable for 140 to 280 vac working range for leddownlighter 36 w frame plate 6 modular modular frameplate 3 module frame plate 8 modular bell buzzerelectronic street light led fitting 18w led bulb 5 watte14 clear candle small thread ww engagement light bid number gem2025b6803280 dated 28-10-2025 bid document1 139 1 1 fitting red green 10watt, vertical districbution board 4way tpn, non modular switch socket combination with boxflush type 16a 5 pin, frame plate 12 modular, bell pushmodular 1 mod, copper tube terminal thimble 25 sqmm pktof 50 nos, mcb dp 100 amp 415volts, led bulb 40 watte27 clear candle, capacitor 4 mfd for exhaust fan, capacitor 3 point 15 mfd for exhaust fan, switch bell pushpt 5 amp, current driver suitable for 140 to 280 vacworking range for 2 feet x 2 feet led pannel 36 watt, blanking plate for mcb, current driver for led rope light, switch board pvc boxes 8 modular, led bulb 0 point 5 watt, ceiling rose, switch board pvc boxes 2 modular, coppertube terminal thimble 16 sqmm pkt of 50 nos, copper tubeterminal thimble 10 sqmm pkt of 50 nos, dimmer 60 to400 w modular regulator, dimmer 60 to 400 w nonmodular regulator, electronic meter single phase 415 volt10 to 60amp lcd display push type, fan pvc ventilator 10inch sweep, fan pvc ventilator 12 inch sweep, fanregulator socket type non modular, fan regulator switchtype non modular, indoor domestic led mirror light 1 x 30walm body, led enagement light fitting with red green bulb, plastic enclosure mcb dp, socket 10 amp modular, streetlight led fitting 35w, switch bell push 10 a modular, switch bell push 6 a modular, switch board pvc boxes 12modular, switch board pvc boxes 3 modular, switch boardpvc boxes 4 modular, switch board pvc boxes 6 modular, switch modular 10 amp, switch non modular 10 amp, vertical districbution board 6 way tpn, verticaldistricbution board 8 waytpn, candle led bulb 40 watt b22, mirror light fitting 30w led alm body, ressessmounting led down light 3 watt, switch 15 amp abbtvisha with indicator, socket 16 amp abb tvisha, bulb 5watt pin type, bulb 5 watt thred type smal, bulb 5 wattthred type big, frame plate 18 modular, led bulb 2 pin 25watt b22 clear candle, led bulb 2 pin 25 watt b22 milky, led bulb 5 watt e14 milky candle, led lamp 60w 2 pinb22 milky, led lamp 40 watt e27, led lamp milky 40watt, led lamp milky 60 watt, led panel 2feetx 2feetrecess mounting for ceiling 36 watt white, flood light ledtype with hanging arrangement upto 60w, led downlighterround shape 9 watt 3000k back lit, led wall mounted msbatten frame decorative end with rod 20 watt, factorymade manhole cover of size 1000 x 600mm, drain cover1200 x 600 x 100, drain cover 600 x 600, heating element2kw with thermostate pocket 9 inch long cup type, heatingelement 2kw with thermostate pocket 9 inch long triangletype, thermostate for water storage heater 9 inch long, modular switch one way 1m 6a, pano type switch 6a oneway, led inverter panel 2 feet x 2 feet recess ip20 withdiffuser and battery 6500k 36w, led inverter panel 2 feet x2 feet recess ip20 with diffuser and battery 2700k 36w, led panel 2 feet x 2 feet recess ip20 with diffuser andbattery 2700k 36w, led downlighter aluminium roundrecess ip20 with diffuser 6500k 18w, led inverterdownlighter round recess ip20 with battery and diffuser6500k 12w, led inverter bulkhead ip20 with battery anddifusser 6500k 10w, electric insulation rubber mat for ht11000 volts isi marked size 1m x 5m x 3mm thick, streetlight 120w cct 5700k along with surge protection with10kv and optic lens ip66 rating minimun luminare effciency135 lm w, street light 90w cct 5700k along with surgeprotection with 10kv and optic lens ip66 rating minimunluminare effciency 135 lmw, spot light green 12w ip66rating, spot light warm white 12w ip66 rating, spot light //bid details2 / 139 cool white 12w ip66 rating, contractor 3 pole ac operatedac 3 185 amp 415 v 90kw, contractor 3 pole ac operatedac 3 40 amp 415 v, led recess mounting penel light 36watt 2 feet x 2feet, cable pvc flexible copper conductor 16sqmm single core, cable pvc flexible copper cond 2 point 5sqmm single core roll of 100 mtr, cable pvc flexible copperconductor 1 point 5 sqmm 3 core roll of 100 mtr, cable pvcflexible copper cond 1 point 5 sqmm single core roll of 100mtr, led lamp 12 watt, led lamp 9 watt, led recessedluminaire 12 watt, led surface celing light circular 12 watt, cable pvc flat aluminium 4 sqmm 2 core, led spot light12 watt warm white, led spot light 12 watt green, mcbdisturbuisation box tp 12 way double door, mcbdistribucation box 8 way tpn double door, led recesseddown light cool white round 15 watt, led surface down lightcool white round 15 watt, led concealed down light coolwhite round 5 watt, mcb db box 1 pole sheet steelenclosure, mcb db box 2 pole sheet steel enclosure, mcbdb box 3 pole sheet steel enclosure, mcb db box 4 polesheet steel enclosure, salt for industrial purpose, ppr gatevalve 20 mm, ppr gate valve 25mm, ppr union 20mm, ppr socket 25mm, ppr elbow 32mm, sfmc ppr reducersocket 25mm x 20mm, sfmc ppr reducer socket 32mm x25mm, ppr elbow 25mm, altoch calcium hychloritegranules 65 to 70 percent, ppr gate valve 50 mm, pprgate valve 40 mm, ppr gate valve 63 mm, ppr union 50mm, ppr union 25mm, ppr union 32mm, ppr socket50mm, ppr socket 20mm, ppr tee 20mm, ppr elbow20mm, manhole cover 450 mm x 450 mm, 3 seater chairsteel godrej cat no fuunwix3021isxxxx unwind orequivalantled single side connection tube rod 20 watt 4 feet, copper tube terminals thimble 35 sqmm pkt of 50 nos, switch 5 amp 1 way modular, fan modular regulator sockettype non modular, led double cap tube rod aluminiumbody 10 watt 2 feet white, led picture light 10watt rgb, led bulb 9 watt b22, led bulb 7 watt warm white b22, fancapacitor 2 point 5 mfd, decorative fancy wall light withled bulb 9 watt ww, switch 6 amp 2 way pt, decorativeled bed side decorative lamp with bulb 2x9w, led bulb15watt b22, led bulb 5 watt candle big thread ww e27, fanmodular regulator socket type modular type, switchmodular 20 amp 2 way, cable pvc flat aluminium 2 core 6sqmm roll of 90mtr, switch 20 amp pt non modular, floodlight led type with hanging arrangement 30w, flood lightled type with hanging arrangement 50w, led downlighterround shape 12 watt 3000k back lit, metal plug top withsocket of capacity 16 amp for ac, led spot light 12w, frame plate 4 modular, frame plate 8 modular squre, leddownlighter squre shape 15 watt 6500k back lit, holderbulb angular type, current driver 140 to 280 vac workingrange for led downlighter 36 w, frame plate 6 modular, modular frame plate 3 module, frame plate 8 modular, bellbuzzer electronic, street light led fitting 18w, led bulb 5watt e14 clear candle small thread ww, engagement lightfitting red green 10watt, vertical districbution board 4 waytpn, non modular switch socket combination with box flushtype 16a 5 pin, frame plate 12 modular, bell push modular1 mod, copper tube terminal thimble 25 sqmm pkt of 50nos, mcb dp 100 amp 415volts, led bulb 40 watt e27clear candle, capacitor 4 mfd for exhaust fan, capacitor 3point 15 mfd for exhaust fan, switch bell push pt 5 amp, current driver 140 to 280 vac led pannel 36 watt, blanking plate for mcb, current driver for led rope light, switch board pvc boxes 8 modular, led bulb 0 point 5 //bid details3 / 139

1

Related Searched Keywords : recess mounting light

Get recess mounting light Tender Alert...

Related Searched Keywords : recess mounting light

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us

Copyright ©2018 - Thetenders.com.