Filters

List of rcc-building Tenders

List of latest rcc-building Tenders in Indian Tenders. Click on any rcc-building Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for rcc-building Tenders.

All-Tenders (35)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49019309 | 01 Jan, 0001

Tender Value : 19.0 Thousand

Kosli - Haryana

Tender for tender for palhawas , pahrajwas , hansawas , saidpur chang , group of 4 no. of habitations annual mtc.works for water supply. outsourcing of works/ job work of silt clearance in inlet channel ..1 job work for repair of jointing of rcc inlet channel including kaccha rassa, rubber ring, cement, sand, brick and other building material and all other works complete in all respect. / size 20 at palhawas

Government Departments

TRN :49019871 | 21 May, 2025

Tender Value : 8.47 Lacs

Agra - Uttar Pradesh

Tender for tender for repair work of zone-1 ward no. 16 ratanpura nagla vida community hall. - cleaning of the site for warkable etc. all complete. (non scheduled) 2 1:5:10 (1 cement : 5 coarse sand (zone-iii) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) (dsr 2023 sh-4.1.10 ) 3 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in :cement mortar 1:4 (1 cement : 4 coarse sand) (dsr 2023 sh-6.4.1 ) 4 brick work 7 cm thick with common burnt clay f.p.s. (non modular) brick of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level and upto floor five level. (dsr 2023 sh-6.8 ) 5 reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,taircases and spiral stair cases above plinth level up to floor fiveevel, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).(dsr 2023 sh-5.3 ) 6 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500d or more(dsr 2023 sh-5.22.6) 7 centering and shuttering including strutting, propping etc. and removal of form work for :columns, piers, abutments, pillars, posts and struts(dsr 2023 sh-4.3.3 ) 8 12 mm cement plaster of mix : 1:4(1 cement: 4 fine sand)(dsr 2023 sh-13.1.1 ) 9 structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(dsr 2023 sh-10.1 ) 10 providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.fire retardant plywood conforming to is: 5509(dsr 2023 sh-9.126.2 ) 11 providing and fixing isi marked is:1341 m.s. pressed butt hinges bright finished with necessary screws etc. complete :)75x47x1.70 mm (dsr 2023 sh-9.55.3 ) 12 providing & fixing decorative high pressure laminated sheet of plain / wood grain in gloss/ matt/ suede finish with high density protective surface layer and reverse side ofdhesive bonding quality conforming to is : 2046 type s including cost of adhesive of approved quality. 1.0 mm thick (dsr 2023 sh-9.127.2 ) 13 distempering with 1st quality acrylic distemper (ready mixed) having voc content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour new work (two or more coats) over and including water thinnable priming coat with cement primer having voc content less than 50 gram/litre (dsr 2023 sh-13.41.1 ) 14 painting steel work with deluxe multi surface paint to give an even shade. two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture(dsr 2023 sh-1021sub head : 13 finishing13.48.3 ) 15 providing & fixing white vitreous china water closet squatting pan (indian type) along with “s” or “p” trap including dismantling of old wc seat and “s” or “p” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of engineer-in charge. long pattern w.c pan of size 580x440 mm (dsr 2023 sh-14.80.1) 16 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require white vitreous china flat back wash basin size 450x 300 mm with single 15mm c.p. brass(dsr 2023 sh-17.7.7) 17 providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white pvc automatic flushing cistern, with fittings, standard size c.p. brass flush pipe, spreaders with unions and clamps (all in c.p. brass) with waste fitting as per is: 2556, c.i. trap with outlet grating and other couplings in c.p. brass, including painting of fittings and cutting and making good the walls and floors wherever required(dsr 2023 sh-17.5.1 ) 18 providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white p.v.c. automatic flushing cistern, with fittings, standard size g.i./ pvc flush pipe for back and front flush with standard spreader pipes with fittings, g.i clamps and c.p. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required: single squatting plate with 5 litre p.v.c. automatic flushing cistern(dsr 2023 sh-17.6.1 ) 19 providing and laying flamed finish granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the engineer-in-charge :flamed finish granite stone slab jet black, cherry red, elite brown, cat eye or equivalent.(dsr 2023 sh-11.55.1 ) 20 providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to isi : 12701, colour of opaque white or as approved by engineer-in- charge. the rate includes making necessary holes for inlet, outlet & over flow pipes. the base support i/c fittings & fixtures for tank shall be paid separately 21 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized pvc medium well casing (cm) pipe of required dia, conforming to is: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of engineer -in-charge100 mm nominal size dia 22 supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized pvc medium well casing (cm) pipe of required dia, conforming to is: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of engineer -in-charge150 mm nominal size dia 23 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply and all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one stepcpvc solvent cement and testing of joints complete as per direction of engineer in charge. internal work - exposed on wall 15 mm nominal dia pipes 24 providing and fixing ptmt bib cock of approved quality and colour.15mm nominal bore, 86 mm long, weighing not less than 88 gms 25 providing and fixing ptmt stop cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms) 26 mirror of superior make glass 60x45 cm 27 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete size of tile 600x600 mm 28 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 29 supply and fixing of light fitting switch board. (none sheduled) 30 supply and fixing wiring of light point. (none sheduled) 31 s/l/j of 20mm dia pvc cunduct pipe etc. all complete. 32 supply & fixing of wiring sub main. 33 supply & fixing of plug point 15mm. 34 lettering & painting of wall etc. all complete. 35 supply & fixing of 27watt. cfl etc. all complete. 36 carriage of materials by manual labour including loading, unloading and stacking for lead less than 01-50 mtrm.207.34+30.42 every 50 additonal meter 37 stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with an admixture of pigment to match the stone shade. 7.38.1 8mm thick (mirror polished and machine cut edge) 7.38.1.1 granite stone of any colour and shade 38 constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast r.c.c. horizontal grating with frame complete as per standard design :with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 39 kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick 40 6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) 41 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.) 42 stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (to be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :8.14.1 red sand stone - exposed face fine dressed with rough backingt 43 marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :raj nagar plain 44 providing and fixing stainless steel ( grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)(dsr 2023 sh-10.28 ) 45 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). (dsr 2023 s h) 46 supply & fixing granite stone work display board (size 2.50ft x 4.00ft) including painting, lettering etc. all complete. (none schedule) 47 sub total 48 add/deduction rs. for estimate figure amount match 49 grand total

State Government

TRN :49020138 | 01 Jan, 0001

Tender Value : 4.48 Lacs

Mandi - Himachal Pradesh

Tender for tender for special repair to health sub centre building up-per bhambla in tehsil baldwara distt mandi (hp) (sh: reconstruction of rcc slab door & windows shutters etc.) deposit work

State Government

TRN :49020344 | 15 May, 2025

Tender Value : 2.55 Crore

Shahbad - Delhi

Tender for e.i.u.s. (revenue) providing and laying cc pavement and drains in deteriorated lanes at jj cluster adjacent to a-block, shahbad daulatpur (in situ upgradation scheme) (pid-16309).- 1 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 2 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone -iii) including manufactored sand derived from recycled concrete aggregate (rca) upto 25%: 4 graded stone aggregate 20 mm nominal size including recycled concrete aggregate(ra) upto 25%. 3 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate40 mm nominal size) 4 providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of r.m.c. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per is : 9103 to accelerate/retard setting of concrete, improve workability without impairing strength and durability as per direction of the engineer-in-charge.”all works upto plinth level :m-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 5 providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 6 centering and shuttering including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete 7 steel reinforcement for r.c.c. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.thermo-mechanically treated bars 8 brick work with common burnt clay f.p.s. (non modular) bricks of classdesignation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) 9 half brick masonry with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand) 10 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) 11 neat cement punning. 12 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in- charge.nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 13 demolishing r.c.c. work manually/ by mechanical means includingstacking of steel bars and disposal of unserviceable material within 50metres lead as per direction of engineer - in- charge. 14 demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. in cement mortar 15 providing and placing in position 100mm thick factory made machine batched & machine mixed precast rcc rectangular covers on drains of footpath of various sizes,of m-25 grade cement concrete for rcc work, including cost of centering, shuttering, reinforcement of 8mm dia tmt bars of fe500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100mm wide ms sheet duly painted over priming coat , reinforcement to be welded at edges with ms sheet and providing 2 nos. 12 mm dia bar for hooks etc i/c cost of cartage ,all leads & lift, handling at site etc. all complete as per direction of engineer-in-charge. 16 providing and fixing in position pre-cast r.c.c. manhole cover and frame of required shape and approved quality 19.19.1 l d- 2.5 circular shape 560 mm internal diameter 17 providing and laying dry brick aggregate 40mm nomial size in foundation and plinth or under floors at all level including spreading ramming in layers as directed by engineer-in-charge. 18 supply of earth and banking the same in layers not exceeding 20 cm in depth breaking clods watering, rolling each layer with 1/2 tonne rolller or wooden or steel rammer and dressing up in embankment for roads, flood banks and filling of ground depression with all leads lifts etc. complete 19 supply of malba/building rubbish and banking the same in layers not exceeding 20cm in depth including breaking clodes, watering, rolling each deposited layers with half tonne roller or wooden or steel rammer and dressing up in embankement for roads, flood banks, guide banks or filling of ground dpression with all leads lifts complete. 20 p/f non asbests multipurpose fibre cement board strip in joints of cement concrete pavement, 50mm+-5mm vide and 6mm thick having normal length not less than 90cm. 21 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:5:10 (1 cement : 5 manufactored sand derived from recycled concrete aggregate (rca): 10 graded stone aggregate 40 mm nominal size recycled aggregate(ra)). 22 add for cost index @31.27 %as per order by gnctd (except item no. 3 & 5) 23 deduct 9.50% as per gnctd

State Government

TRN :49020519 | 15 May, 2025

Tender Value : 0

Pandavapura - Karnataka

Tender for tender for melukote gp nrlm shed - ppura mason class 1,eletrification,gst,ppura cp brass waste 32 mm of standard pattern,ppura brass stop cock,ppura lead or pvc connection pipe 32mm dia (for wash basin),ppura licenced plumber with tools,ppura pvc pipe of 4kg cum,63 mm,ppura pvc pipe of 4kg cum,110 mm,ppura polyenthylene water storage tank of specified capacity l,ppura labour charges for lifting and placing in position and making connection at 7%,ppura handling loading and unloading 3% on material,ppura water proofing cement paint,ppura add brush, putty, sand paper at 2% on cost of paint,ppura plastic emulsion paint,ppura add brush, putty, sand paper, roller at 5% on cost of paint,ppura enamel paint,ppura transportation charges of materials beyond 5 km10%,ppura cost of 6.5mm m.s. coil,ppura fabrication charges.,ppura mason class 2,ppura rcc cap 1000 mm dia, 100 mm thick,ppura corpenter,ppura corpenter avrage,ppura chrominum plated screws,ppura 5.50 mm thick plain glass,ppura fabricator,ppura add hom of welding and grinding machine 2% on material,ppura formwork, centering & scaffolding for plastering & painting of ceiling - 25%,ppura vitrified tiles 600x600 mm,ppura high bond tile adhesive for vitrified tiles,ppura adhesive for joints,ppura machine polished granite stone slabs 20 mm,ppura stone dresser (with tools),ppura ceramic tiles of size 30 x 30 cms,ppura white cement,ppura orissa pattern of size 580x440mm with integral type foot rests,ppura 100mm s or p trap,ppura p.v.c. flushing cistern 10 lts low level with fitting,ppura c.i. / m.s. brackets for flushing cistern,ppura g.i. 32mm dia telescopic flush pipes with fittings specials,ppura m.s. holder bat clamp 32mm,ppura g.i. overflow pipe 20mm dia,ppura special for overflow pipe,ppura mosquito proof coupling 25mm,ppura add white lead paint, gasket, cement, sand for making good the wall and floor,ppura white vitreous china clay flat back wash basin size 630x450mm,ppura copper plated brass piller tap 15mm,ppura cp brass chain with plug,ppura binding wire,ppura m.s rods,ppura ms flat,ppura fitter class i,ppura welder grade i,ppura add hom of welding and grinding machine 4% on material,ppura ready mix primer paint (ready mix red lead paint),ppura add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint,ppura painter class i,ppura add providing and removing scaffolding at 3% on labour,ppura add handling , loading and unloading at 2% on material,ppura enamel metal paint,ppura add brush at 1% on cost of paint,ppura mathi/nandi wood planks for panels 25 mm thick,ppura add cutting and other wastage 5%,ppura hom of machinaries for planing,ppura mathi/nandi wood scantling,ppura unit cost as per the specification,ppura powder coated 60-70 micron,ppura nylon rollers,ppura rubber beading for shutters beading,ppura pvc beading,ppura alluminium tower bolt - 20 cm,ppura alluminium handles - 15 mm,ppura cleat angles,ppura coarse sand (zone iii),ppura portland cement,ppura mixer (concrete) - 1 cum capacity,ppura add watering charges at 1 % on material,ppura add sundries charges at 1 % on material,ppura over head & other miscellaneous charges,ppura size stone 20 x 20 x 25 cms,ppura bond stone 20 x 20 x 45 cm,ppura boulders,ppura mixer (concrete small used in culvert),ppura mason class i (with tools),ppura mason class ii (with tools),ppura stone chistler class ii,ppura plasticizer / super plasticizer,ppura hom of vibrator 0.71 days,ppura add sundries charges at 1 % on labour,ppura add watering charges at 1 % on labour,ppura formwork, centering & scaffolding for beams & lintels of building - 60%,ppura formwork, centering & scaffolding for roof (straight & arched) - 50%,ppura burnt bricks of class designation 35 modular,ppura casurina poles 100 - 150 mm,ppura add handling , loading and unloading at 1% on material,ppura add sundries charges at 2 % on material,ppura formwork, centering & scaffolding for chejjas, canopy & other architectural,ppura tmt bars fe 500,ppura broken stone aggregate 40 mm size,ppura broken stone aggregate 20 mm size,ppura broken stone aggregate 12 mm to 10 mm size

Local Bodies

TRN :49020691 | 01 Jan, 0001

Tender Value : 0

Mandi - Himachal Pradesh

Tender for tender for supply of 1. sand / gravel quarry- per cubic meter, 2. sand / gravel crusher 10, 20,40 mm per cubic meter 3. stone cut stone- per stone 4. stone cut stone (galma) per stone, stone per cubic meter 6. boulder stone per cubic meter, 7. jcb machine (cutting and dressing)- per hour 8. shuttering, wood & steel (building construction / drain & dung) per square foot 9. cement transportation with load / unload- per bag 10. rcc pipe (all sizes)- per foot 11. cement mixer (with operator) per bag 12. citizen information board painting / wall writing- per square foot 13. sign board writing per board for various development work

Government Departments

TRN :49020859 | 21 May, 2025

Tender Value : 2.39 Lacs

Agra - Uttar Pradesh

Tender for tender for chhatta zone-1 room no. 27 work of laying rcc hume pipe from building number 11/109 to 11/196 near bagh muzaffar khan raj shri talkies - demolishing r.c.c. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of engineer - in- charge. 2 removal of sludge, kankar, brick bats, organic or inorganic material in faul position or in liquid mud including lead 30m and 3.00 meter lift with specials t&p labour etc. all complete. 3 earth work in surface exvation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excevated earth upto 50 m and lift upto 1.5, as directed by engineer in charge (dsr 2023 sh 2.1.1) 4 1:5:10 (1 cement : 5 manufactured sand derived from recycled concrete aggregate (rca) : 10 graded stone aggregate 40 mm nominal size including recycled aggregate (ra) (dsr 2023 sh 4.1.10a) 5 brick work with common burnt clay f.p.s. (non modular) brick of class designation 7.5 in superstructure above plinth level upto floor v level in all shapes and size in cement morter 1:4(dsr 2023 s h 6.4.1 ) 6 12 mm cement plaster of mix : 1:4(1 cement: 4 fine sand)(dsr 2023 sh-13.1.1 ) 7 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). (dsr 2023 s h 4.1.3 ) 8 disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.(dsr 2023 sh 15.60) 9 providing and laying non pressure np-3 class (medium duty) r.c.c. pipes including collars/ spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 450 mm dia rcc pipes 10 supply & mixing 3.5 kg and or as specified by the manufacture, hardener in tremix concrete per sqm 11 sub total 12 add/deduction rs. for estimate figure amount match 13 grand total

State Government

TRN :49021266 | 20 May, 2025

Tender Value : 10.65 Lacs

Baghpat - Uttar Pradesh

Tender for tender for beautification work in nagar panchayat doghat - exavation in foundation in ordinary soil (loam,clay or sand) including lift upto 1.50 m.and including filling watering and ramming of excavated earth into the trenches or into the space beetween the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge upto a distance of 30 m. from the foundation trenchs .(where machine can not move) as per s.i. no. 251 (a) 2 concrete with 4 cm gauge brick ballast, fine sand of 1.25 f.m and cement, in the proportion of 12:6:1 in foundation and under the floor i/c supply of all materials,labour , t & petc. required for proper completion of the work. as per s.i. no. 273 3 m -150 brick work with 1:4 (one cement & four fine sand mortar ) in foundation and plinth including supply of all materials,labour , t & petc. required for proper completion of the work as per s.i. no 305. 4 r.c.c. work with cement , approved coarse sand & 2 cm guage approved stone grit in proportion of 1:1.5:3 in lintelof doors & windows excluding supply of reinforcement and its bending .but including its fixing and binding the same with 24 b.w.g.g.i. binding wire and including necessary centering and shuttering etc. and supply of all materials ,labour,tools & plants etc.requered for proper completion of the work including cost of binding wire. but in lighter beam havingspans upto 6 m. as per s.i. no. 289 5 r.c.c. work with cement , approved coarse sand & 2 cm guage approved stone grit in proportion of 1:1.5:3 but for slab 284 6 m.s.(tor steel or plain ) in plan work such as rc.c. or r.b. work including bending for proper shape and including supply of steel & its wastage ,bend,hooks,and authorised, overlapping shall be measured and including cost of binding wire.as per s.i. no. 504, 7 m -150 brick work with 1:4 (one cement &four fine sand mortar ) in foundation and plinth including supply of all materials,labour , t & petc. required for proper completion of the work as per s.i. no 304 .but in superstructre including necessary cutting & moulding of bricks add extra labour to this item 305+309(4300.00+225.00=4525.00) 8 cementconcrete with 2 cm gauge stone grit, coarse sand & cement in the proportion of 4 :2:1 includingsupply of all materials,labour , t & petc. required for proper completion of the work as per s.i. no. 279(a). 9 12 mm thick plaster with cement and coarse sand mortar in 1:4 over brick work minimum thickness not be less than 1 cm including supply of all materials, labour, t & p etc. required for proper completion of the work as per s.i. no.584(a). 10 m.s. or iron work of small sizes and section such as holding down bolts ,hold fast tie rods grating etc.same as in item no. 502 above but in m.s. grills / stair case,. raling /gates/trusher racks etc. as per schidule item no. 502 (a) . 11 supply of birbed iron wire 12 supply of birbed iron wire labour only 13 earth work in cutting or embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 m in depth and earth work in embankmentto be in 20 cm layers i/cramming and dressing the surface to required levels and slopes and also i/c 1.50m lift and 30 m lead. the earth from cutting to be used in making embankment or to be deposited as per spoil banks with in 30 m distance as directed by the engineer incharge . complete in all respect as per sino. 253(a) +261 b 14 supply and laying of 80mm thick precast cement concerete i-shape interlocking paver blocks with top layer of minimum 5 mm thickness having paln dimension 200x(160+120mm) of o.p. cement , smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro-compression mechanism. the compressive strength of concrete paver block shall not less than 40mpa (m-40) and weigt 4.5kg per no. confirming to is: 15658-2006 including cost of material, with a blanket layer of 4.00cm. thick fine sand labour, t&p and vat etc required for proper completion of the work as directed by engineer-in-charge, including c.p.as per s.i. no. new item no. 14 15 construction of cc road in 1:1.5:3 16 i love doghat size (22*3 feet) 17 iron work structure 18 open gym /jhula/ bench 19 lighting work 20 providing & laying of green grass in ground with labour complete work. 21 supply & fixing of sign boardat site including letter writing, painting both side of board including supply of all materials,labour , t & petc. required for proper completion of the work as per s.i. no.

Local Bodies

TRN :49021372 | 01 Jan, 0001

Tender Value : 0

Mandi - Himachal Pradesh

Tender for tender for supply of sand crusher, gravel crusher 10, 20, 40mm, soling boulder (cut stone) stone, brick for earthen kiln, soil cutting and breaker by jcb/lnt machine, movement of material (within panchayat area and from cement thunag karsog to panchayat including uphill and downhill movement) by tractor jeep other vehicle, shuttering iron and wood, wood iron and aluminium fittings and door window, ply board sheets other fashion ceiling pailing/ pvc torn sheets/, labour rate piling pvc and udon, hardware items (rebar 8, 10, 12, 16mm, angle, channel size wise, tile, paint, railing iron building fiting, pvc/hdpe pipes different sizes, sanitary fittings and labour rate etc.), colour coated roof sheets etc. and ceiling sheets etc., high mask lights. rcc bulvert pipe, furniture items (all types of office household furniture), welding works, mixer machine, painter (with or without paint), apple plum pear plants authorized and certified by the horticulture department, sign board (22, 24 etc. size), wall writing painting (for painting of 6*4,65,66 etc. size), animal statue bench etc. for krishna dham in gram panchayat deem, electrical fitting material and lever gas electric heater, computer system, water dispenser, stationery, various items for sanitation management, digital board, other materials

State Government

TRN :49021622 | 13 May, 2025

Tender Value : 1.52 Lacs

Mandi - Himachal Pradesh

Tender for estimate for sop to new construction building of rd & pr department by provding 3phase lt cable and metering equipment at bhiuliin (e) section khaliyar uesd,hpsebl,no-iii mandi.(ts no. 04/2025-26, ) tender no. med/m-iii-13/2025-26-supply part ) 2 st pole 8mtr. long 3 rcc muff 4 lt pvc cable 3.5 x 50 mm² 5 msci 100x50x6mm length=600mm*3 6 shackle insulator with d-iron 7 half clamp 8 full clamp 9 egg insulator 10 l t stay set complete 11 stay wire 7/3.15mm 12 clamp for holding cable 13 gi wire 8 swg 14 kit kat fuse 63a 15 nuts & bolts off sizes 16 energy meters 3-?, 4 wire ctoperated static tri-vector meter(ct-50/5a) 17 aluminum paint for steel pole @ 1 ltr.p/pole 18 erection part 19 erection ofpvc cable 3.5 x 50 mm²complete in all respect 20 erection of 8/9mtr.st pole complete in all respect 21 erectionof stay set complete in all respect

Related Searched Keywords : rcc building

List of rcc-building Tenders

Tender for tender for special repair to health sub centre building up-per bhambla in tehsil baldwara distt mandi (hp) (sh: reconstruction of rcc slab door & windows shutters etc.) deposit work

Get rcc building Tender Alert...

Related Searched Keywords : rcc building

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us