Indian Tenders Tender information of India
Global Tenders International Tender information
Projects Project information of India
Tender Awarded Tender awarded information
Sub-Contractor Vendor information of India
Pay Online
Register now
Login
Contact Info All India : 9276083333 / 9274315555 South India : 9274315555

Filters

List of primer-coat Tenders

List of latest primer-coat Tenders in Indian Tenders. Click on any primer-coat Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for primer-coat Tenders.

All-Tenders (19)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :35822312 | 17 Nov, 2025

Tender Value : 54.88 Lacs

Patna - Bihar

Tender for gem bids for above, pl man scrap b-brsh heavy scrapping and surfacepreparation, blast cleaning, primer inside pontoon surfacetolerant epoxy primer, external primer one coat ofinorganic zinc silicate prime, primer epoxy zinc phosphateprimer, intermediate coat two coats of epoxy micaceousiron oxide mio, intermediate coat two coats of glass flakeepoxy with phenalkamine, two coat of aliphatic acrylicpolyurethane min vol solids 55 percentage with rutile tio2in glossy finish, one coat of solvent free epoxy phenolicnovolac, two coats of solvent free epoxy phenolic novolac, double scaffolding, letter writing work, tank logoas per painting manual, tank colour band

State Government

TRN :35805208 | 28 Nov, 2025

Tender Value : 2.80 Lacs

Tamluk - West Bengal

Tender for cleaning and washing of pcc poles and rail pole structure and other iron materials by wire brush to make them smooth. all pcc poles and foundation plinth above ground level are to be painted with two coat of cement primer and two coat of final paint cleaning and washing of pcc poles and rail pole structure and other iron materials by wire brush to make them smooth. all pcc poles and foundation plinth above ground level are to be painted

State Government

TRN :35812514 | 15 Nov, 2025

Tender Value : 0

Sirmour - Himachal Pradesh

Tender for periodical renewal on jaiher mangarh road km 0/0 to 6/320 sh- providing g-iii, primer coat, , tack coat, bituminous concrete 25mm thick and thermoplastic compound etc.

Central Government/Public Sector

TRN :35788088 | 28 Nov, 2025

Tender Value : 35.11 Crore

Pithoragarah - Uttaranchal

Tender for providing and laying of gsb 100 mm, crm base crm 100 mm, dbm 60 mm and bc 40 mm incl primer coat, tack coat, rd marking with thermoplastic paint 2.5 mm thk and providing of rd stud of size 100x100 mm btw km 22.68 to 46.58 on nyu sobla-sela-tedang rd

Central Government/Public Sector

TRN :35789904 | 12 Nov, 2025

Tender Value : 0

Pathankot - Punjab

Tender for gem bids for apache, tape masking 3m 232, threadlocker loctite 242 50ml, epoxy primer mil prf 85582, adhesive epoxyloctite ea 9394, adhesive loctite ea 9396, adhesiveepoxy loctite ea 9330, epoxy adhesive gray scotch021200 65202, lubricant solid film 1 qt, corrosionpreventing compound, air dry solid film lubricantmil l 23398 tyii 347grm, dsealent clear group ii mila 4614630 30z, sb lubricant solid film, sealingcompound, sealing compound ams s 8802 rev e ty2cl b2, sealing compound ac735b2, sealant ac350ahalf 103ml, sealant mil prf 81733 rev d ty ii half, sealing and coating compound mil prf 81733, sealing compound ams s 8802 rev e ty2 cla half, prcstandard6 0z, compound joint epoxy 60 oz, corrosion resistance, sealant 654 pr1422b half, sealant 654 semkit 6 0z, sealant 654 semkit 6 0z pr1440 b2, sealant silicon 300ml, solvent positron, thinner for epoxy paint, threadlocker grd aa, threadlocker grd av, ultrasonic couplant gel 1gal, doswil rtv sealant mil a 46106 90 ml, epoxyadhesive ea9309 3na, greeen epoxy priver, loctiteea 9313 ot, neoprence high performance adhesive021200 19928

Central Government/Public Sector

TRN :35774004 | 17 Nov, 2025

Tender Value : 7.50 Crore

Mumbai - Maharashtra

Tender for gem bids for custom bid for services - vacuum blasting with grit externalfor all whether decks 1200sqm, custom bid for services -blasting of external areas with copper slag 20000sqm, custom bid for services - blasting of internal areas with grits16000sqm, custom bid for services - blasting of externalwith copper slag for loose seats and pillars 1000sqm, custom bid for services - copper slag blasting ofunderwater hull area 5000sqm, custom bid for services -internal area painting after blasting 50000sqm, custom bidfor services - external area painting after blasting100000sqm, custom bid for services - high pressure jetwashing with fresh water 35000sqm, custom bid forservices - low pressure jet washing with fresh water70000sqm, custom bid for services - sweep blasting withcopper slag external 5000sqm, custom bid for services -spot blasting with copper slag 3000sqm, custom bid forservices - touch up painting external per coat 15000sqm, custom bid for services - touch up painting internal percoat 1500sqm, custom bid for services - degreasing &chemical cleaning 10000sqm, custom bid for services -staging above 10 ft in sqm 3000sqm, custom bid forservices - stripe coat painting internal per coat 4000sqm, custom bid for services - feathuring internal and externalarea 1500sqm, custom bid for services - hydroblastingabove water hull weather decks and superstructure25000sqm, custom bid for services - surface preparationby papering and one coat of primer 18000sqm, custom bidfor services - surface preparation as per st2 and one coat ofprimer 500sqm, custom bid for services - surfacepreparation as per st3 and one coat of primer 2000sqm, custom bid for services - cleaning the surface papering andapplication of subsequent coat of paint 35000sqm, custombid for services - piping surface preparation by throughlydegreasing roughened with emery paper again degreasingone coat of primer on pipes pipe dia up to 50 mm 500sqm, custom bid for services - ppiping surface preparation by /bid number: gem/2025/b/6834042* /dated: 03-11-2025 & & / bid document1 / 43 throughly degreasing roughened with emery paper againdegreasing one coat of primer on pipes pipe dia 151 to350mm 500sqm, custom bid for services - piping surfacepreparation by throughly degreasing roughened with emerypaper again degreasing one coat of primer on pipes pipe dia51 to 150 mm 500sqm, custom bid for services - cabletrays surface preparation by papering one coat of primer upto 100 mm 500sqm, custom bid for services - cable trayssurface preparation by papering one coat of primer 101 to200 mm 500sqm, custom bid for services - cable trayssurface preparation by papering one coat of primer beyonds201 mm 500sqm, custom bid for services - cable trayscleaning the surface papering and application ofsubsequent coat of painting upto 100mm 500sqm, custombid for services - cable trays cleaning the surface paperingand application of subsequent coat of painting 101 to 200mm 500sqm, custom bid for services - cable trayscleaning the surface papering and application ofsubsequent coat of painting beyonds 201 mm 500sqm, custom bid for services - cleaning and painting of plain &perforated gi sheet, ms sheet aluminium sheet and ss sheetper coat 135000sqm, custom bid for services - pipingcleaning the surface papering and application ofsubsequent coat of paint pipe dia up to 50 mm 500sqm, custom bid for services - piping cleaning the surfacepapering and application of subsequent coat of paint pipedia 51 to 150 mm 500sqm, custom bid for services - pipingcleaning the surface papering and application ofsubsequent coat of paint pipe dia 151 to 350mm 500sqm //bid details2 / 43 /

Central Government/Public Sector

TRN :35774899 | 11 Nov, 2025

Tender Value : 0

Jodhpur - Rajasthan

Tender for gem bids for repair oblice maintenance of bailey bridge roller rockingmk ii 55 nos at ge ep jodhpur, taking out to contractorwork shop for repair oblice maintenance and broughtback to ge ep, repair oblice maintenance obliceoverhauling removing old loose paint grease salt scratchingwith steel wire brushes cleaning of all moveable bush shaftetc by petrol oblice kerosene, dismantilling and reassembling, s and f steel bush as per sample, s and f pincotter 25 mm long as per sample, s and f pin cotter 50 mmlong as per sample, s and f special sliding pin 63 mm cir asper sample, s and f nut bolt washer and spring washer asrequired, s and f mild steel chain with accessories, s and fmild steel shoe 50 mm dia as per sample, s and f en seriessteel shaft as per sample, s and f grease filling lid as persample, requirement of red oxide metal primer, requirement of steel wire brush, requirement of cottonwaste, requirement of turpentine oil, requirement ofolive green metal paint, applying 03 coats of paint, numbering and naming of part with white metal paint

Central Government/Public Sector

TRN :35779239 | 10 Nov, 2025

Tender Value : 27.1 Thousand

Gaya - Bihar

Tender for gem bids for training, cuticle cutter, cuticle pusher, tip cutter, nail buffer, filerhard buffer, nails tips with box, glue 401, pasting brush, top coat make boltbee, base coat make boltbee, dehydrate make boltbee, primer make boltbee, sun uvlamp 48w make shills professional, art brush, detailingbrush, acetone with pump 200mm make boltbee, line freewipes, practice plate, electric nail fiile drill machine makeboltbee, builder gel make boltbee, gel brush make shillsprofessional, acrylic powder make shills professional, acryic professional powder make shills professional, monomer 150ml make boltbee, polygel tube 30ml shillsprofessional, poligel tips 100pcs shills professional, polygelclips shills professional, slip solution polygel make boltbee, polygel professional brush make boltbee, dappen glass, half tip box each box contain 100 pcs shills professional, stone mix size, cat eye nail polish make shills professional, nail colour remover make boltbee, 6 in 1 cat eye magnet, uv sine base coat make boltbee, matte top coat makeboltbee, 3 colour chrome power, nail polish gel red greenpink black white yellow each color 1 pcs, wax heater, mehndi cone make kaveri each box contain 12 pcs, hikarihasami seasor kainchi make berina, mehndi head practicebook, bleach termeric 500g make panchvati, headmassage oil make olive oil

Central Government/Public Sector

TRN :35779992 | 12 Nov, 2025

Tender Value : 0

Jodhpur - Rajasthan

Tender for gem bids for repair, repair oblice maintenance of ewbb roller plain 10 nosroller rocking 09 nos and jack hydraluic 15 ton 10 nos atge ep jodhpur, taking out to contractor work shop forrepair oblice maintenance and brought back to ge ep, repair oblice maintenance removing old loose paint rollerplain 10 nos and roller rocking 09 nos as per rate analysiss no 2, repair oblice maintenance jack hydraulic 15 ton10 nos as per rate analysis s no 3, dismantilling and reassembling jack hydraulic, complete oiling and greasingjack hydraulic, dismantilling and re assembling roller plainand roller rocking, s and f en series steel bush as persample, s and f pin cotter 25 mm long as per sample, sand f pin cotter 50 mm long as per sample, s and f specialsliding pin 63 mm cir as per sample, s and f grease fillinglid as per sample, s and f en series steel shaft as persample, s and f mild steel handle as per sample, s and fnut bolt washer and spring washer as required, s and fspecial roller as per sample, s and f side oblice middlemain bush plate as per sample, applying grease to eachbush and shaft 0 point 25 kg per 450 per kg 112 point 50, main body alignment center lining measuring and adjustingangles etc on special cnc machine, roller alignment centerlining measuring and adjusting angles etc on special cncmachine, re threading oblice strengthening old threads, re welding broken welds and strengthen welding afterproper grinding oblice cleaning, requirement of red oxidemetal primer, requirement of steel wire brush, requirement of cotton waste, requirement of turpentineoil oblice thinner, requirement of olive green metal paint, applying 03 coats of paint, numbering and naming of partwith white metal paint

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

1
2

Related Searched Keywords : primer coat

Get primer coat Tender Alert...

Related Searched Keywords : primer coat

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us

Copyright ©2018 - Thetenders.com.