Filters

List of pipe-support Tenders

List of latest pipe-support Tenders in Indian Tenders. Click on any pipe-support Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for pipe-support Tenders.

All-Tenders (53)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35774142 | 24 Nov, 2025

Tender Value : 0

Srinagar - Jammu And Kashmir

Tender for gem bids for supply, installation, testing, commissioning of compressor for split wall mount ac 2tr, sitc ofpcb for cassette type ac indoor, sitc of pcb for cassettetype ac outdoor, sitc of of pcb for split wall mount ac 2tr indoor unit, sitc of of pcb for split wall mount ac 2 troutdoor unit, sitc of of pcb for split wall mount ac 1.5 trindoor unit, sitc of of pcb for split wall mount ac 1.5 troutdoor unit, sitc of refrigerant gas cylinder r410 a, sitc of refrigerant gas cylinder r22, sitc of refrigerantgas cylinder r32, sitc of refrigerant gas cylinder nitrogen, sitc of ms support stand, sitc of 6 kva single phaseautomatic voltage stabiliser, sitc of of refrigerant copperpiping 15.9mm, sitc of of refrigerant copper piping12.7mm, sitc of of refrigerant copper piping 9.5mm, sitcof of refrigerant copper piping 6.4mm, sitc of heavy dutypvc drain pipe /bid number: gem/2025/b/6830842* /dated: 03-11-2025 & & / bid document1 / 20

Central Government/Public Sector

TRN :35775774 | 22 Nov, 2025

Tender Value : 0

Gandhi Nagar - Gujarat

Tender for gem bids for acid gloves, bench protector, blotting sheet ordinary, blotting sheet ordinary nonabsorbent, bottle topdispenser, brush for cleaning beaker, brush for cleaningbottle, brush for cleaning weigh machine, bubbler, pipettefiller, butter paper, cotton roll absorbent, cotton rollnonabsorbent, crucible, crucible with lid, cryogeniclabels, forceps blunt, forceps pointed, hand protectorgrip, heat resistant gloves, heat resistant plates, icecube pouch, inoculating metal loop with holder, inoculatingmetal wire straight with holder, inoculating needle, label, label freeze tag, labelling tape multipurpose, magneticbead retriever, magnetic beads cross spin, magneticbeads round bar with pivot ring, n95 mask, mask facial, mortar and pestle with spout, nitrile hand gloves blue, para film roll, petri plate carrier, petri plate compartmentstand, petri plate rack, petri seal, rack thermoconductive, rackstand test tube, scissors surgical, spatula, stand for burette with clamp, stand forseparating funnel, stand for cod tube, stand for kjeldahltube, stand tripod, stand tripod circular, steam indicatortape, syringe filter, test tube cap, threads green waxed, tissue paper roll, tongs for beaker, tongs for conicalflasks, tongs for crucible, tongs for test tubes, weighingboats large, weighing boats medium, weighing boatssmall, whatman filter paper no 1, whatman filter paperno 40, whatman filter paper no 41, whatman filter paperno 42, glass microfiber disc, ph electrode, ec electrode, antivibration sheet, tlc plate, cellulose thimbles, tlcsilica gel 60, uv lamp 254 nm, silica gel on tlc al foils, brush for cleaning test tube, brush for cleaning flask, brush for cleaning pipette, stand for bulk density tubes, shoe cover, hair cap, flask support, safety gogglehardcoat eyewear, laboratory jack, bunsen burneradjustable and flame stabilizer, burner methylated spiritwith wick, guaze iron, tubing silicon rubber, rubbertubing pressure, nitrile gloves with long legth reusable, polythene gloves, swan neck tap one way type, swanneck tap two way type, swan neck tap three way type, multichannel micropipette, pcr plate, aluminium coolingblock, pcr tubes, stop cock for carboy, pm2 point 5 filterpaper air monitoring membrane, pm10 filter paper, filtersfor use in us epa pm10 ambient air monitoring, antibumping granules, syringe filter hydrophilic ptfefs13mm, syringe filter hydrophobic ptfe fs13mm, syringe filter pes fs13mm, syringe filter pvdf fs13mm, syringe filter hydrophilic ptfe fs25mm, syringe filterhydrophobic ptfe fs25mm, syringe filter pes fs25mm, syringe filter pvdf fs25mm, nitrile long cuff gloves size s, nitrile long cuff gloves size m, nitrile long cuff gloves size l, aluminum foil, kimwipes

corporations/Associations/Others

TRN :35778819 | 17 Nov, 2025

Tender Value : 30.25 Lacs

Satna - Madhya Pradesh

Tender for supply of pvc/gi/hdpe pipe and supporting material iind call

corporations/Associations/Others

TRN :35779202 | 13 Nov, 2025

Tender Value : 0

Pune - Maharashtra

Tender for gem bids for valve collet 3 groove , valve stem seal , t bolt clamp 90 mm , precoated drain plug , rubber bush top , temperature sensor 4k1080tae 122.1kw , manifold absolute pressure sensor ds s3 tf 4b , koel care genuine coolant premix 26 litres can , k sealent 80 ml , kirloskar care gold genuine oil 50 litre can , joint for cover plate , banjo bolt , o ring for inlet manifold sleeve dia 104 , o ring for inlet manifold sleeve dia 94 , joint bet. inlet manifold and cyl head , expansion bellow 3 mm , joint , t bolt v band clamps 108 dia , o ring for cac pipe sleeve 114 dia , o ring for cac pipe sleeve dia 84 , pre filter cartridge , special banjo bolt for oil spay nozzle , grommet 12 dia ferrule , grommet 22 dia ferrule , ferrule 12 dia , ferrule 22dia , grommet support washer 20.2 , grommet support washer 31.5d , connecting rod bolt , big end bearing top miba , big end bearing bottom miba , inlet valve seat insert semi finish , gasket cylinder head 1.15 thk , valve guide finish , inlet and exhaust valve pair , o ring 38 dia l.o. header , o ring 58 dia l.o. header , o ring 67 dia l.o. header , joint water pump suction , gasket lub. oil header , joint suction pipe assly , o ring 29dia element oil cooler , hose radiator to suction pipe , hose pipe to thermostat , joint cooler cover , lube oil filter full flow spin on , lube oil filter by pass spin on , adaptor for lube filter full flow side , adaptor for lube filter by pass side , thermostat element , joint thermostat housing , gasket thermostat cover , water pump assly , rubber bush bottom , oil supply pipe rh crank case turbocharger , oil supply pipe l h from crankacse to turboch , joint bet exh manifold and cyl head joint adaptor and turbo , joint flange for tc lube oil outlet pipe , v b and clamp 88mm nominal dia , joint exhaust bend and expansion bellow , joint centrifugal adaptor and filter , gasket oil sump and centrifuge adaptor , o ring for oil filling pipe , oil inlet pipe from crankcase to centrifuge fi , joint delivery tube flange , o ring dia 36 l.o. delivery tube , rubber bush , joint suction tube flange , joint breather plate and adapter , joint dv10 turbo , vent pipe for radiator 750 kva , piston cooling nozzle u s u i , cylinder liner assembly with abp ring , piston assly , v belt 2jbx58 pitch length 1550 , v belt spb ar1250 6 nos. set , luboil sump , fuel pipe fuel pump to main filter lh from g , fuel pipe fuel pump to main filter rh from ge , fuel pump leak off 1 rh from ge , fuel pump leak off 1 lh from ge , rail leak off pipe assembly , fuel pipe assly flexible , lub oil pump , oil cooler 17 plate pn nj 57000 for dv engine , common head leak off , radiator outlet hose for dv12e 750kva , joint bet bello exh manifold , turbo drain pipe rh from flywheel end , turbo drain pipe , o ring for rocker box cover , fuel pipe return , pressure and temperature sensor , bridge for rocker lever , final filter cartridge , joint for fuel pump , flex.hose for vent , hose clamp , air cleaner primary element , air cleaner safety element , hose bolt clamp 137mm od , hose for balance water pipe , hose t bolt clamp 112mm od , o ring drain plug , nut m8x1.25 gr8 , plain machined washer m10 , nut m10x1.5 gr8 , centrifugal filter service kit for dv , joint bet water pump hsg and header , bush bearing se dv0 , top overhauling charges per cylinder , machining of cylinder head per cylinder , connecting rod bushing per cylinder , injector testing charges cylinder , turbo service charges , fuel tank cleaning charges , radiator cleaning charges valve collet-3-groove, valve stem seal, t- bolt clamp ( 90 mm), precoated drain plug, rubber bush top, temperature sensor: 4k1080tae 122.1kw, manifold absolute pressure sensor ds s3 tf 4b, koel care genuine coolant premix 26 litres can, k sealent (80 ml), kirloskar care gold genuine oil 50 litre can, joint for cover plate, banjo bolt, o ring for inlet manifold sleeve dia 104, o ring for inlet manifold sleeve dia 94, joint bet. inlet manifold & cyl head, expansion bellow 3 mm, joint, t bolt v band clamps (108 dia)., o ring for cac pipe sleeve 114 dia, o ring for cac pipe sleeve dia 84, pre-filter cartridge, special banjo bolt (for oil spay nozzle), grommet: 12 dia ferrule, grommet: 22 dia ferrule, ferrule: 12 dia, ferrule: 22dia, grommet support washer-20.2, grommet support washer-31.5d, connecting rod bolt, big end bearing top miba, big end bearing bottom miba, inlet valve seat insert semi-finish, gasket: cylinder head 1.15 thk, valve guide finish, inlet & exhaust valve pair, o ring 38 dia: l.o. header, o ring 58 dia: l.o. header, o ring 67 dia: l.o. header, joint: water pump suction, gasket (lub. oil header), joint: suction pipe assly, o ring 29dia: element oil cooler, hose: radiator to suction pipe, hose: pipe to thermostat, joint: cooler cover, lube oil filter full flow spin on, lube oil filter by pass spin on, adaptor (for lube filter) (full flow side), adaptor (for lube filter) (by-pass

corporations/Associations/Others

TRN :35779622 | 17 Nov, 2025

Tender Value : 67.00 Lacs

Satna - Madhya Pradesh

Tender for supply of di/ci pipe and supporting material iind call

Central Government/Public Sector

TRN :35779844 | 13 Nov, 2025

Tender Value : 0

Ranga Reddy - Telangana

Tender for gem bids for casing and capping, duel face plate, gi wire support, 1inch capping, 2 inch capping, 3 inch capping, 4 inchcapping, 1 inch pvc pipe, conduits, miscellaneous, 24port patch panel, 1mtr patch cord, 2mtr patch cord, aio, back box, single face plate, liu, ofc patch card, installation charges for networking and ofc, electricalifitting charges, camera, poe switch, liu for camera, labour charges

State Government

TRN :35781689 | 19 Nov, 2025

Tender Value : 1.79 Crore

Port Blair - Andaman And Nicobar Islands

Tender for gem bids for custom bid for services - providing and placing of new baline4 pipe support pedestal rcc pre cast and approach roadfor ad pipeline maintenance from boundary wall to bridgeno 1 /

Central Government/Public Sector

TRN :35761315 | 10 Nov, 2025

Tender Value : 57.07 Lacs

Dibrugarh - Assam

Tender for gem bids for point, point to point radio link, workstation, cat 6 outdoor cable, 2 meter frangible pole with all accessories, 4 meter frppole with all accessories, 30 meter self supporting tripodtype tower with lightning arrestor earthing and aviationlight, 8 port industrial non poe l2 managed switch loadedwith sfp module, 8 port industrial poe l2 managed switchloaded with sfp module, 16 port or better industrial nonpoe l2 switch loaded with sfp module, 6 port fully loadedliu, rj 45 connectors, ms corrugated flexible pipe, 25 mmpvc conduit pipe, installation testing and commissioningof entire system

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

corporations/Associations/Others

TRN :35763519 | 21 Nov, 2025

Tender Value : 0

Hyderabad - Telangana

Tender for gem bids fortubes upto 14mm od size with wall thickness up to 2mm , tubes upto 18mm od size with wall thickness up to 2.5mm , automatic orbital welding of stainless steel ss-321 impulse tubes up to 14 mm od size with wall thickness up to 2 mm and all inline components. , tubes up to 14mm od size with wall thickness upto 2mm , tubes up to 18mm od size with wall thickness upto 2.5mm , manual welding of titanium impulse tubes up to 14 mm od size with wall thickness up to 2 mm and all inline components. , radiographic testingidentification of the weld joints for impulse pipes sizes upto 14 mm od and 2 mm thick. , hydro testing of impulse tubes with equivalent medium of the system at maximum upto 25 mpa loops consisting of instrument, impulse tubes , dpt - die-penetrate testing work include identification of the weld joints, making scaffolding arrangement, shifting the dpt consumable to location , vbt - vacuum box testing for csorss transition plate welded to liner for supports. , fabrication and erection of impulse tube supports of stainless steel , fabrication and erection of isa, ismc, ismb or any other cross section of ms e250 grade a of is 2062- 2011

Related Searched Keywords : pipe support

List of pipe-support Tenders

Tender for supply of pvc/gi/hdpe pipe and supporting material iind call

Tender for supply of di/ci pipe and supporting material iind call

Tender for gem bids for custom bid for services - providing and placing of new baline4 pipe support pedestal rcc pre cast and approach roadfor ad pipeline maintenance from boundary wall to bridgeno 1 /

Get pipe support Tender Alert...

Related Searched Keywords : pipe support

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us