Filters

List of ms-tray Tenders

List of latest ms-tray Tenders in Indian Tenders. Click on any ms-tray Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for ms-tray Tenders.

All-Tenders (9)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :35806158 | 15 Nov, 2025

Tender Value : 0

Visakhapatnam - Andhra Pradesh

Tender for gem bids for procurement, cold flaring depressurizing unit 5 head, manual valvescrew unscrew unit, fully automatic degassing machine, cylinder washing tank, flp weighing scale, hydrostatictesting machine 10 head, hydrotesting machine for 35 kg, portable vacuum cleaning pump, electrostatic painting andpriming booth, overhead conveyor, air compressor atlascopco ga 45, ms pipe supply and fabrication, pneumatictesting unit for 10 cylinders, cylinder punching unit, s i ofgi chain conveyor with chain, supply of helical drive unit 5hp, supply of elcometer, supply of torque wrench, uttbottom thickness machine, l1 to l9 gauge set low voltagelamp, supply and fabrication of cross over, supply ofpower cable 4 sqmm 4 core, supply of control cable 1.5sqmm 3 core, cable glands, cable tray 100mm 25mm gisupply, cable tray 50mm 25mm gi supply, cable laying, cable tray installation, supply of main power cable 150sqmm 3 core, excavation for cable laying, sply of ledlights 90 watts, sply of led drivers 90 watts, installationof led lights, distribution box panel flp, distribution boxpanel non flp, i c of distribution box

Central Government And Public Sector

TRN :35807672 | 24 Nov, 2025

Tender Value : 53.08 Lacs

Ambala - Haryana

Tender for gem bids for providing, 3 tr single circuit 1 or 3 phase, 1.5tr single circuit 1 or 3phase, itc of 1.5 or 3.0 tr dac unit, 40 x 40 x 5 mm msangle iron, 40 x 5 mm ms flat strip, cu ref pipe 6.4 mmdia with insulation, cu ref pipe 9.5 mm dia with insulation, cu ref pipe 12.7 mm dia with insulation, cu ref pipe 15.87mm dia with insulation, upvc pipe 40mm dia, upvc pipe 25mm dia, 5c x 4 sqmm pvc cu cable, 3c x 1.5 sqmm pvccu cable, 4c x 6 sqmm pvc cu cable, dp 25 or 32a 230vc mcb in encl, fp 25 or 32a 415v c mcb in encl, gsssheet ducting 0.63mm, gss sheet ducting 0.80mm, supply air grills, 100x50x1.6 mm thick cable tray, 150x50x1.6 mm thick cable tray

Central Government/Public Sector

TRN :35774004 | 17 Nov, 2025

Tender Value : 7.50 Crore

Mumbai - Maharashtra

Tender for gem bids for custom bid for services - vacuum blasting with grit externalfor all whether decks 1200sqm, custom bid for services -blasting of external areas with copper slag 20000sqm, custom bid for services - blasting of internal areas with grits16000sqm, custom bid for services - blasting of externalwith copper slag for loose seats and pillars 1000sqm, custom bid for services - copper slag blasting ofunderwater hull area 5000sqm, custom bid for services -internal area painting after blasting 50000sqm, custom bidfor services - external area painting after blasting100000sqm, custom bid for services - high pressure jetwashing with fresh water 35000sqm, custom bid forservices - low pressure jet washing with fresh water70000sqm, custom bid for services - sweep blasting withcopper slag external 5000sqm, custom bid for services -spot blasting with copper slag 3000sqm, custom bid forservices - touch up painting external per coat 15000sqm, custom bid for services - touch up painting internal percoat 1500sqm, custom bid for services - degreasing &chemical cleaning 10000sqm, custom bid for services -staging above 10 ft in sqm 3000sqm, custom bid forservices - stripe coat painting internal per coat 4000sqm, custom bid for services - feathuring internal and externalarea 1500sqm, custom bid for services - hydroblastingabove water hull weather decks and superstructure25000sqm, custom bid for services - surface preparationby papering and one coat of primer 18000sqm, custom bidfor services - surface preparation as per st2 and one coat ofprimer 500sqm, custom bid for services - surfacepreparation as per st3 and one coat of primer 2000sqm, custom bid for services - cleaning the surface papering andapplication of subsequent coat of paint 35000sqm, custombid for services - piping surface preparation by throughlydegreasing roughened with emery paper again degreasingone coat of primer on pipes pipe dia up to 50 mm 500sqm, custom bid for services - ppiping surface preparation by /bid number: gem/2025/b/6834042* /dated: 03-11-2025 & & / bid document1 / 43 throughly degreasing roughened with emery paper againdegreasing one coat of primer on pipes pipe dia 151 to350mm 500sqm, custom bid for services - piping surfacepreparation by throughly degreasing roughened with emerypaper again degreasing one coat of primer on pipes pipe dia51 to 150 mm 500sqm, custom bid for services - cabletrays surface preparation by papering one coat of primer upto 100 mm 500sqm, custom bid for services - cable trayssurface preparation by papering one coat of primer 101 to200 mm 500sqm, custom bid for services - cable trayssurface preparation by papering one coat of primer beyonds201 mm 500sqm, custom bid for services - cable trayscleaning the surface papering and application ofsubsequent coat of painting upto 100mm 500sqm, custombid for services - cable trays cleaning the surface paperingand application of subsequent coat of painting 101 to 200mm 500sqm, custom bid for services - cable trayscleaning the surface papering and application ofsubsequent coat of painting beyonds 201 mm 500sqm, custom bid for services - cleaning and painting of plain &perforated gi sheet, ms sheet aluminium sheet and ss sheetper coat 135000sqm, custom bid for services - pipingcleaning the surface papering and application ofsubsequent coat of paint pipe dia up to 50 mm 500sqm, custom bid for services - piping cleaning the surfacepapering and application of subsequent coat of paint pipedia 51 to 150 mm 500sqm, custom bid for services - pipingcleaning the surface papering and application ofsubsequent coat of paint pipe dia 151 to 350mm 500sqm //bid details2 / 43 /

Central Government And Public Sector

TRN :35782321 | 24 Nov, 2025

Tender Value : 57.41 Lacs

Ambala - Haryana

Tender for gem bids for sitc, 3 tr single circuit 1 or 3 phase, itc of 3.0 tr dac unit, 40x 40 x 5 mm ms angle iron, 40 x 5 mm ms flat strip, curef pipe 9.5 mm dia with insulation, cu ref pipe 15.87 mmdia with insulation, upvc pipe 40mm dia, upvc pipe 25 mmdia, 5c x 4 sqmm pvc cu cable, 3c x 1.5 sqmm pvc cucable, 4c x 6 sqmm pvc cu cable, dp 25 or 32a 230v cmcb in encl, fp 25 or 32a 415v c mcb in encl, gss sheetducting 0.63mm, gss sheet ducting 0.80mm, supply airgrills, 100x50x1.6 mm thick cable tray, 150x50x1.6 mmthick cable tray

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

Central Government/Public Sector

TRN :35770277 | 17 Nov, 2025

Tender Value : 0

Budgam - Jammu And Kashmir

Tender for gem bids for xerox, pilot pen hi tec point v10 grip blue pilot pen hi tec pointv10 grip red pilot pen hi tec point v10 grip green pilotpen hi tec point v10 grip black pilot pen hi tec point v10grip blue bxgpn v10 broad oblique large add gel penblue add gel pen black add gel pen red add gel refillblack add gel refill blue add gel refill red ball penreynolds blue ball pen reynolds black ball pen reynoldsred ball pen blue cello oblique montex ball pen red cellomontex binder clip 32 mm binder clip 41 mm calculator12 digit citizen calculator scientific fx 100 ms make casio cd cover oblique envlope cd rw cd r blank correction pen kores dak folder superior quality four fold envelop size se 8a envelope size se-4 envelope sizese4a envelope size se5 envelope size se6 envelopesize se7 envelope size se7a envelope se8a envelopewhite large envelope white medium eraser pkt of 10 paper punch fevicol 100 gms fevicol 500 gm pack filecover plastic coated white file cover printed highlighterpen five colour set box file jem clip kores packingtape brown paper cutter 1 inch paper cutter blade 1 inch paper t pin make pony paper xerox a3 paper xerox a4 pen luxer hi tech black pen luxer hi tech blue pen luxerhi tech red pencil natraj hb pencil sharperner permanent marker pen renolds pen blue pkt of 10 pcs renolds pen black pkt of 10 pcs renolds pen red pkt of 10pcs refil blue reynolds pkt of 10 pcs refil red reynoldspkt of 10 pcs refil black reynolds pkt of 10 pcs register400 pages classmate scale plastic 12 inch scale steel 12inch scale steel 24 inch sketch pen set 12 colour stamp pad ink 50ml sutli jute thread tag cotton small tag cotton good quality large green pencil cell cellotape transparent white 2 inch cello tape transparentwhite 1 inch cello tape transparent white half inch bid number gem2025b6846864 dated 01-11-2025 bid document1 117 0 0 removable self adhesive tape, scissor, brown paperplastic coated, carbon paper dfs black, carbon paper dfsblue, carbon paper fs black, carbon paper fs blue, clipboard plastic, clutch pencil staedler graphite 777 0.5 supquality, clutch pencil leads 0 point 5 70mm h, computerpaper 10 inch x12 inch x2 ply, correction pen fine pointmake reynolds 693 metal tip, drawing pin soldier brass 13mm, make ezee or eqv, drawing pencil b and 2b 6 nos ineach pkt, drawing pencil h, drawing pencil hb natrazapsara or any equal brand, drawing rubber, drawingsheetcoloured pink blue yellow and green, drawing sheet white72cmx56cmx1 mm thick extra smooth both side, drawingsheet white 76cmx56cmx1 2 mm thick good quality, duster for white board, edge binding ribbon coloured, edge binding tape 2 point 5x6 cm, gem clip plastic coated, glolitre flourescent pen make luxor, glue stick kores 15gms, gum bottle 700 ml 750 ml, gum tube20 oblique 50ml make kores camel or eqv, high tech point pen 0 point 5black luxor, high tech point pen 0 point 5 blue luxor, hightech point pen 0 point 5 green luxor, high tech point pen 0point 5 red luxor, ink for high tech pen diff colour, ink forstamp pad 50 bottle, ohp marker pen sup quality fine tipblack oblique blue, paper pin rust proof make pony, paperweight glass, pen set parker, pen stand with 2 pen set, pen stand with 4 pen set, pencil sharpner table mountedtype model omega 1743, photo paper glossy make desmatpack of 50 nos a4 size, pin cussion, plastic tray office forfile, quick fix 5 oblique 10 gms pack 50 gms pack, refillsblue jotter, refills ordy blue pkt of 10 nos make reynolds, refills ordy red pkt of 10 nos make reynolds, refills ordyblack pkt of 10 nos make reynolds, refill reynolds blue pktof 10 pcs, refill reynolds red pkt of 10 pcs, rotring penset 8 nos make rotering, scissors 21cm long brass supquality, scribbling pad 100 sheets 18cm x 11cm, selfadhessive tape 12mm width 65 mtr length blue make, selfadhessive tape 12mm width 65 mtr length green makepremier xl or eqv brand, self adhessive tape 12mm width65 mtr length orange make premier xl or eqv brand, selfadhessive tape 12mm width 65 mtr length red makepremier xl or eqv brand, self adhessive tape 12mm width65 mtr length black make premier xl or eqv brand, selfadhessive tape 24mm width 65 mtr length blue makepremier xl or eqv brand, self adhessive tape 24mm width65 mtr length blue make premier xl or eqv brand, selfadhessive tape 24mm width 65 mtr length green makepremier xl or eqv brand, self adhessive tape 24mm width65 mtr length red make, self adhessive tape transparent12mm width 65 mtrs length make premier xl or eqv brand, self adhessive tape transparent 12mm width 65 mtrslength make premier xl, sketch pen set product no 920luxor, stamp pad large, stamp pad small, staplermachine hd model max hd 12n17 make max, staplermachine no. 24 oblique 06 makekangaroo, stapler machineno 10 make kangaroo, stapler pin 23oblique 10 make max, stapler pin 23 oblique 17 make max, stapler pin big size 24oblique 6, stapler pin heavy duty 5 oblique 8inch, stickfolder red blue black and green with stick, tags cottonlace type large, tags cotton superior quality small size, talc sheet 0 point 5mm thick 1 point 25m width makemarvell, twine jute sutli, white board marker blue blackred and green, xerox paper legal, note book ruled 100pages, engagement pad, self stick removable notes makehighland 100 sheets, page marker make desmat, permanent marker red blue black and green reynold or eqv //bid details2 / 117, paper poker, white envelop medium size for do letter, white envelop small size for do letter, silk ribbon 1oblique2 inch width assorted colour red green yellow and blue, pin remover superior quality, spiral binding back coverdifferent colour a4 size, spiral binding top covertransparent legal size, spiral binding back cover plasticdifferent colour legal size, spiral binding wire 12mm 15mm 20mm 30mm and 40mm dia, print a stick self stickingplastic letter 1 oblique 4 inch 1 oblique 2 inch 3 oblique4inch 1 inch and 1 1 oblique 2 inch size of different colourred blue black and green, self sticking flag d colour, selfsticking pad 75x100 mm 100 sheet, pilot hi tech point penv7 red, pilot hi tech point pen v7 blue

Central Government/Public Sector

TRN :35722666 | 18 Nov, 2025

Tender Value : 32.97 Lacs

Bhopal - Madhya Pradesh

Tender for gem bids for supply and construction of earthing pit, supply of copperplate, supply of copper strip, supply of salt granular, supply of charcoal granular, supply of upvc pipe, supplyof concrete box and lid, brazing of interconnection, supply of 50 sq mm green colour multi-strand insulatedcopper wire, supply of 16 sq mm green colour multi-strandinsulated copper wire, supply of 10 sq mm green colourmulti-strand insulated copper wire, supply of equipotentialearth bus bar with 10 nos nuts and bolts, supply andconstruction of inspection chamber, supply of 40 mmnominal dia gi pipe, supply of 100 mm nominal dia gi pipe, soil treatment, supply of 32 mm pvc flexible pipe, supply of 300 mm wide metallic cable tray, supply of 300mm wide metallic cable tray t joint, supply of 300 mmwide metallic cable tray bend, supply of 32 mm msconduits, supply of 25 mm casing caping, supply oflightening arrestor with spikes, supply of transient earthbonding unit, supply of 25 mm upvc pipe, supply of 150mm x 50 mm cable tray raceway, supply of class c spdsingle phase netural, supply of spare module of class cspd, supply of secondary stage protection series filtersingle phase 40 amps 120 ka, supply of lugs connectorsferrules etc, supply of 5 kva online ups power supplysystem with static switch and battery monitoring system, supply of modular switch board, supply of technicalconsole, supply of frp pole, supply of 3 core 6 sq mmcable, supply of 3 core 4 sq mm cable, supply of 3 core2.5 sq mm cable, supply of spn mcb 32 a, supply of spnmcb 16 a, supply of spn mcb 10 a, supply of mcb box, supply of 42 u rack with accessories, itc of all above items

Central Government / Public Sector

TRN :35775635 | 11 Nov, 2025

Tender Value : 0

North 24 Paragana - West Bengal

Tender for gem bids for goods transport services - per mt - metallic items; openbody taurus; 30 mt capacity truck

Central Government/Public Sector

TRN :35695212 | 17 Nov, 2025

Tender Value : 0

Tirupur - Tamil Nadu

Tender for expression of interest for indigenous development of metal item, nut pt.no. 02-4107-01 dp-3948

Related Searched Keywords : ms tray

List of ms-tray Tenders

Tender for gem bids for goods transport services - per mt - metallic items; openbody taurus; 30 mt capacity truck

Tender for expression of interest for indigenous development of metal item, nut pt.no. 02-4107-01 dp-3948

Get ms tray Tender Alert...

Related Searched Keywords : ms tray

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us