Filters

List of ms-table Tenders

List of latest ms-table Tenders in Indian Tenders. Click on any ms-table Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for ms-table Tenders.

All-Tenders (15)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35982301 | 08 Dec, 2025

Tender Value : 0

Nagpur - Maharashtra

Tender for supply of 3 kvar metalized polypropylene gas filled, wavy cut three phase self healing type capacitors, rated at 480v, 50hz, rated current 1.2 amps. capacitor should have discharge resistor- e and over pressure disconnection.as per rdso modification.sheet no. rdso/pe/ms/ac/0054- 2011 rev.0 or latest and confirming to is:13340 with isi mark. suitable for capacitor bank of lhb ac coach. make: m/s epcos or m/s vishay or any other equivalent capacitor confirming to is: 13340 with isi mark and having property as defined in table-1 according to rdso/pe/ms/ac/0054-2011 rev.0 (firm shall submit complete type test report as per is 13340 along with latest isi certification)

Central Government/Public Sector

TRN :35986271 | 10 Dec, 2025

Tender Value : 4.64 Crore

New Delhi - Delhi

Tender for gem bids for sif, bid number gem2025b6917370 dated 24-11-2025 bid document1 94 1 1 steel almirah medium, steel almirah large, steel bid sidelocker, bath stool, bar counter, bar cabinet, bar chair, bath mat, single bed, double bed, bed iron, workshopbench, book case, book case cabinet, book case open, notice board, black board, counter table, counter billing, sofa, verandah chair, dining chair, dining chair high, pvc verandah chair, writing chair, computer chair, folding table, executive chair, visitor chair, visitor chairarm, barber chair, conference chair, easy chair, easychair set, charpoy, pegs set, cupoboard wooden, podium, school bench, dresing mirror gents, display board, drugget, magazine rack, hat stand, hot case, key box, personal locker, aluminium ladder, mirror, mirror withshelf, meat safe, peg table, ss plate rack, pointer long, pointer medium, pointer short, receptacle, storage rack, steel shoe rack, rifle rack, rifle rack 8, steel sloted rack, meat safe small, wooden settie, show case, shelves rack, show case grocery, side board, stand wash, sofa set 5, sofa set 4, dressing stool, steel stool, wooden stool, siderack, centre table, dining table, dinging table 8, servingcounter, dining table 4, table, ss top table, bed sidetable, executive table, dressing table ladies, dressingmirror, pantry table, officer table, officer table small, table 19 mm, cook table, writing table, computer table, confrence table, card table, revolving chair, table cookhouse, teapoy, teapoy verandah, table laboratory, workbench, curtain rod, wooden flooring, led spot light, false ceiling wooden, vertical blinds, roller blinds, wardrobe wooden, pub table, corner table, screenmovable, bench three seater, split ac 2 ton, split ac, copper pipe, transmisson wire, ms stand, insulated pvc, ro 15, ro 20, ro 50, ro 100, water cooler 30, watercooler 60, water cooler 120, water cooler 150, destercooler 50 //bid details2 / 94

Central Government/Public Sector

TRN :35970542 | 02 Dec, 2025

Tender Value : 0

Senapati - Manipur

Tender for gem bids for ply wood 8 feet x4 feet x12mm particale board pre-laminated 8 feet x4 feet x18 oblique 19mm exterior gde plastic laminated sheet teak face 8 feet x 4 feet x 1mm black board commercial 8 feet x 4 feet x 18 mm pvc sheetfor chair dining map fd particle board pre-laminated 8 feetx4 feet x12mm mordant solution ply wood 8 feet x4 feetx9mm ply wood 8 feet x4 feet x4mm ply wood 4mm thickone side teak face ply wood bwr 8 feet x4 feet x6mm cushion for sofa set 100 mm thick 32 mm density 21 inch x22 inch fevicol sh aluminium sheet 22 swg lookingmirror for table dressing ladies size 360x1120x5mm varnish mirror for table dressing ladies made in teak woodframe of size 25 x 19mm overall size 1220mm height x355mm wide fixed at 150mm from top of lower basealongwith mirror 55mm thick seat for chair cb steelwithout arms looking mirror table dressing gents360x700x5mm back seat for chair tubular with arms dendrite mirror for table dressing gents made in teak wood25 x 19mm overall size 790mm height x 410mm wide fixedat 150mm from top of lower base alongwith mirror 55mmthick paint enamelled og lock for almirah steel newarnylon 25mm width white knob decorative acrylic basewheel for chair revolving executive teak wood beading12mm x 4mm x 2m channel aluminium 12mm doorhandle aluminium 100 mm pegs aluminium 75mm beeding pvc of size 16x6mm handle for almirah mediumsteel 150mm cp legs for dining table of size 800 x 75 x 50mm curtain rod stainless steel 15 to 20mm 6mtr long teak wood beading 19mm x 4mm x 2m handle for almirahmedium steel 100mm cp pegs aluminium 125mm teakwood legs for teapoy size 550x60x30mm continious pianohinge hasp and stapple aluminium 100mm rubber capfor chair cb steel painting brush 75mm legs for peg table bid number gem2025b6856201 dated 22-11-2025 bid document1 87 0 0 size 420 x 50 x 30 mm, rubber oblique pvc shoes for chairdining, rubber oblique pvc shoes for chair tublar steel, painting brush 50mm, door handle aluminium 75mm, butthinges ms 100 mm, painting brush 25mm, ms screw wood15mm, butt hinges 25mm, rubber oblique pvc shoes fortable dining oblique writing, pencil carpenter 10 nos ineach pkt, gi tubing 32 mm, handle for chair revolvingexecutive, paint white 1st grade synthetic enamel, whitespirit, cp knob 25mm, hasp and stapple ss 75mm, hapsand stapple ss 125mm, beeding pvc of size 12 x 6mm x 8feet long, painting brush 100mm, elbow 3-way gi 32 mmdia, tapestry cloth 1.5 mtr wide, check nut 32mm, legsfor table centre size 450x60x30mm, lock for drawer steel, stainless steel hanger 5 way, abbrasive cloth obliqueemery paper no 50, abbrasive cloth oblique emery paperno 60, abbrasive cloth oblique emery paper no 80, abbrasive cloth oblique emery paper no 100, abbrasivecloth oblique emery paper no 120, seat hot pressedcushion of size 510mm x470mm x 60mm for chaircomputer oblique chair revolving make godrej, elentro, supreme or euivalent, seat hot pressed cushion of size510mm x470mm x 60mm for chair writing map obliquechair visitor oblique chair cushion w oblique arms makegodrej, elentro, supreme or euivalent, back hot pressedcushion of size 510mm x470mm x 60mm for chaircomputer oblique chair revolving make godrej, elentro, supreme or euivalent, back hot pressed cushion of size510mm x570mm x 60mm for chair writing map obliquechair visitor oblique chair cushion w oblique arms makegodrej, elentro, supreme or euivalent, bottom gas lifthydraulic for revolving chairs make isi marked, broomcountry coconut nariyal jhadu, blazer cloth green 1.5mtrwide, chapra flakes oblique powder, cloth malmal white1.5mtr wide, electro plated cloth paper no 80 make isimarked, electro plated cloth paper no 100 make isi marked, electro plated cloth paper no 120 make isi marked, glassplain transparent 4mmx6 feet x4 feet rectangular makesaint gobain, modi guard, siscom or equivalent, glass plaintransparent 5mmx6 feet x4 feet rectangular make saintgobain, modi guard, siscom or equivalent, glass toughenedtransparent 5mmx4 feet x2 feet rectangular make saintgobain, modi guard, siscom or equivalent, glass toughenedtransparent 5mmx6 feet x3 feet rectangular make saintgobain, modi guard, siscom or equivalent, glass toughenedblack colour 6mmx3 feet x2 feet rectangular make saintgobain, modi guard, siscom or equivalent, mild steel starhead screw wood 15mm 100 pcs pkt, mild steel star headscrew wood 20mm 100 pcs pkt, mild steel star head screwwood 25mm 100 pcs pkt, mild steel star head screw wood35mm 100 pcs pkt, mild steel star head screw wood40mm 100 pcs pkt, mild steel panel pin 15mm 100 pcs pktisi marked, mild steel panel pin 20mm 100 pcs pkt isimarked, mild steel panel pin 25mm 100 pcs pkt isi marked, mild steel panel pin 35mm 100 pcs pkt isi marked, mildsteel panel pin 40mm 100 pcs pkt isi marked, nails wiresteel 20mm, nails wire steel 50mm, nails wire steel 25mm, nails wire steel 100mm, nails wire steel 40mm, nails wiresteel 75mm, oil putty, pvc edge band oblique edge tapegolden yellow oblique teak colour size 18mm w x10mtr lisi marked, pvc edge band oblique edge tape goldenyellow oblique teak colour size 12mm w x10mtr l isimarked, pvc edge band oblique edge tape golden yellowoblique teak colour size 6mm w x10mtr l isi marked, synthetic rexine cloth 1.5mtrs wide, u foam of 4 feet x 2 //bid details2 / 87 feet x100mm 32mm density make kurlon, sleepwell, duroflex or equivalent, veneer sheet 8 feet x4 feet x1mmgolden yellow oblique teak colour make sainik, greenply, kitply, century, greenlam, veneer sheet 8 feet x4 feetx1mm white make sainik, greenply, kitply, century, greenlam, touch wood, thinner, paint enamelled black, paint red oxide, ms screw wood 25mm, ms screw wood35mm

Central Government/Public Sector

TRN :35973061 | 28 Nov, 2025

Tender Value : 3.40 Lacs

Indore - Madhya Pradesh

Tender for supply oftent and conference items - standees, welcome standee, backdrop on doas with poster, backdrop, led, registration desk with supporting staff, audio, video system, cordless mikes with supporting staff, sapling, shawl, dias preparation, chairs, sofas with glass table, flower decoration of dias, cluster seating, podium with mike, lighting of lamp arrangements, photography, videography during conference and any other item for zonal conference on cost and competitiveness of msmes in india

Central Government/Public Sector

TRN :35962961 | 01 Dec, 2025

Tender Value : 0

Mathura - Uttar Pradesh

Tender for gem bids for steel, almirah med steel, bed hard steel, mattress of size 1981mm in to 1829 mm of thickness 8 inch, charpoy ms tubewith hard ply top, charpoy folding i p with ply top, tablebed side, chair verandah, chair school with hand board, almirah large steel, rack shoe steel, book case steel

Central Government/Public Sector

TRN :35955796 | 01 Dec, 2025

Tender Value : 0

Jaipur - Rajasthan

Tender for gem bids for air freshener liquid v3 q4, cleaning duster v3 q3, domestic wiper/wiper mopper v3 q4, ball pen blue, ball pen black, uni bal lpen blue, pilot pen v7 hightech, cartridge pen v7, pilot pen v5 for officer, highlighter, pencil hb make natraj, board marker, cd marker ohp, fluidpen correctional, fevicol mr 105 gms, photocopierpaper a4, register 200p, register 500p, self adhesive3inch tape, transprinttape2inch, tape half inch 50mtr red, tape brown half inch 50mtr, tape half inch green blue, paper cutter large, call ball make anchor, dusting clothcotton, paper flags 25mmx75mm, pencil cell aa, pencilcell aaa, file binder, spurnyarn suthali, calculator j120, stapler small size, stapler large size, sketch pen black, alkaline cell, brown sheet, cordless bell battery, paperweight, dak entery register 500 p, envelop for service, file cover coloured, pen stand good quality, cup andsaucer white colour, serving tray 15x9 inch, coaster asper sample, glass brosill medium, glass borosil large, frillsfor tea table, table cloth 7x4, desert spoon, tonge as persample, compost, chloro ec, sis gold, hand sanitizer, hand sanitizer small btl, table tennis racket, table tennisball, carrom powder 250grm, shuttle cock, duster forboard, water bottle plastic 1ltr, water bottle plastic 1ltrfood, cleaning brush for water, ss bottle 1ltr, report filetransparent 30l, hand towel, appreciation certificate, frame for certificate, wall clock, switch socket 5amp, kettle electric, thermos 5ltr, extension board 5 socket, tele phone set parallel, aqua blue ro 25ltr, water purifierro, chair visitor, pag table with glass top, tv trolly lowhight movable, officer chair high back, computer cabinetwork st, in out tray with toughen, file cabinet with tworack, tele phone set display, insulated mug steel, flowerpot plastic 24cmx24cm, pot steel 40cmx40cm, foot mats /bid number: gem/2025/b/6874473* /dated: 21-11-2025 & & / bid document1 / 88 x9 ft, mats foot 2.25 x4ft, water camper 20ltr, stopwatch good quality, garden umbrella as per sample, matjute for trg 4 ftx50 ft l, air freshener refill make air wick, liquid hand wash btl 200ml make, glass cleaner 500mlmakecolin, toilet cleaner 500ml makeharpic, phenol 1 ltrbottle, napkin tissue paper make glow, garbage bag 60ltr, phooljharu soft broom make tausif, coconut broom, poucha cloth, tyre polish make waxpol, mop pocha withhandle, car napkin paper, ms office 2024, air cooler75ltr, paper shardder 09 sheets, paper shardder 30sheets, water dispanser hot and cold 15ltr, microwave30ltr, led 5inch tv ultra hd 4k smart, split ac 2 ton 3starwith invertor, camera ip bullet 5mp with nvr, mfd1200x1200 dpi, aio cpu i7 12gen 27inch, laserjet printera4 size, original hp cartridge 10 black, original canon g-790, original epson 008 ink bottle, original epson 001 inkbottle, original epson 005ink black, original epson 003inkset, original hp cartridge no 388a, original hp cartridgeno 18a, original hp cartridge no 278a, original hpcartridge no 12a, kyocera cartridge no tk 1114, canoncartridge no 925, tonner canon npg 51 black, tonnerricoh mp 3554s, original tonner ricoh mpc 2503hs black, original tonner ricoh mpc 2503hs yellow, original tonnerricoh mpc 2503hs magenda, original tonner ricoh mpc2503hs cyan, tonner kyocera tk 7120, epson printer plq30, hp cartridge 36a, brother cart tn 261, keyboard, mouse, mouse pad, printer usb cable, printer power cable, extender cable, vga cable 1point 5 mtr, vga cable 5 mtrlong, hdmi cable 10 mtr long, cmos bty for pc, hdmicable 1 point 5 mtr long, connector rj45, 2 in 1 hdmi porthdmi splitter, hdmi cable 3 mtrs, 2 in 1 usb port printersplitter, printer usb cable 5 mtrs, pump for desert cooler

Central Government/Public Sector

TRN :35955977 | 11 Dec, 2025

Tender Value : 3.41 Crore

New Delhi - Delhi

Tender for gem bids for sitc, 200w led cct tuneable fresnel light having cob ledsource, 300w led profile spot 19 degree light having cobled source, aluminium o type clamp provided with fixturemounting 25mm m8 bolt and wing nut, dual safety chainmade of gi wire bundled and twisted together, ms sheetelectrical panel with 7 outgoing circuits, high quality powerjunction box having total max rating 10a, 250v a.c with350meter frls copper 3 core cable, metal power junctionbox 2 way snap fit, high quality dimming in junction box 1way, high quality dimming out junction box 1 way, dmxloop junction box having 1 no. of dmx 5 pin xlr, internalearthing system with copper bare conductors all along thecable trays, black powder coated cable trays, dmx malefemale connectors 5 pin with rubber sheath protection with300 meter cable, dmx male termination connector 5 pinwith resistor for signal defaming, dmxcontroller 12 faderswith dmx 512 protocol, opto isolated rdm enabled dmxsplitter unit, table top microphone with 600mm gooseneckmicrophone, supercardoid lobar, digital mixing console andipad control, modular card based digital signal processor, 2-way high power loudspeaker, ptz auto framing camerawith ai analytics, live switcher with 4 standards converted3g-sdi inputs, 2d dve, sdi to usb for media converter, large format display fullhd, camera preview full hd ledscreen, motorized retractable mic and monitor, one eighthhdmi distributor, hdmi transmitter and receiver, 8 by 8hdmi swticher, sdi cable and connerctor, centralcontroller with touch panel, digital interactive podium, phonoconnectors, dismentling of existing cables andconnectors, complete sitc of auditorium, systemoperator for av system, lighting etc for 3 years, 3 operator

State Government

TRN :35941047 | 28 Nov, 2025

Tender Value : 1.00 Crore

Bikaner - Rajasthan

Tender for dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer.cement concrete grade m-15 and above and pcc blocks clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to a lead of 50 metres from road boundary including removal and disposal of top organic soil not exceeding 150 mm in thickness as directed by engineer.in area of light jungle silt clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. sludge clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. "providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level :1:3:6 (1 cement : 3 fine/ coarse sand : 6 graded stone aggregate 20 mm nominal size). " 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : including providing /mixing of synthetic fibers compulsorily complying with is 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of cement i.e. 125 gms per 50 kg cement up to 900 gms per cum of concrete/ mortar. "reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete." centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete. wrought iron and mild steel welded work) (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately. providing and fixing of reinforced ferro-cement drain covers designed for 'a' class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted m.s. plate , rim and m.s. lifting hooks, admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc.standard size 2100x500mm (150mm thick) for span 1201 to 1500mm brick work with fps bricks of class designation 75 in foundation and plinth in:cement mortar 1:4 (1 cement : 4 coarse sand) cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand) providing and laying precast reinforced cement concrete box culvert section of m-40 grade designed for 'aa' class loading as per irc specifications including the effect of impact, eq etc. complete on firm base of 200mm thick lean concrete of m-10 grade with aggregate of size 40mm nominal of following internal sizes. the work includes required safety measures, construction of drain for diversion of flowing water, cost of design of rcc precast box and its proof checking from iit/mnit jaipur etc. complete in all respect as per specifications diversion of flowing water, cost of design of rcc precast box and its proof checking from iit/mnit jaipur etc. complete in all respect as per specifications size 2.00 m x 2.00 m providing, laying, spreading and compacting of granular sub-base by providing close graded material, mixing in a mechanical mix plant at omc, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion.grading - i material providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (wmm) base course comprising of graded stone aggregate and granular material conforming to mort&h specifications (table 400-ii) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per mort&h specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per is : 8887 and approved quality @ 0.6 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and applying tack coat on the prepared surface with bitumen emulsion as per is: 8887 and approved quality @ 0.2 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. "providing and laying 50-75 mm compacted thick design mix (approved by engineer) dense bituminous macadam on prepared surface with specified graded crushed aggregates as per table 500-9, 500-10 with bitumen binder set (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) for base/ binder course including loading of material with f.e. loader, heating and mixing of stone aggregate, filler and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control as per clause 504.3.5 to the required level and grade, compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa to achieve the desired density (approximately 2.3 tonne/cum) complete as per clause 507 of mort&h specification but excluding primer/tack coat, including all material, labour, machinery, lighting, guarding and maintenance of diversion.grade-ii with bitumen vg-grade 30 @ 4.25 %, lime filler @ 2% (percent by weight of total mix)" "providing and laying 30-45 mm compacted thickness bituminous concrete as per design mix (approved by engineer) on prepared surface with specified grade stone aggregate as per table - 500-18 with bitumen for wearing course including loading of aggregate with f.e. loader and hot mixing of stone aggregate and bitumen (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensing device (as per clause 504-3.5) to the required level and grade and compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa, to achieve the desired density complete as per clause 509 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding primer/tack coat.grade-ii with bitumen vg-grade 30 @ 6% (percent by weight of total mix)" "earth work in excavation in open area, stp, wtp, pumping station with mechanical means including dressing of sides and ramming of bottoms, including getting out the excavated material, disposal of excavated material lead upto 1000m at suitable site as per as per drawing and as per direction of engineer. (measurements for payment to be done as per standard drawings). above 3.0 m and upto 6.0 m depth" dismantling of existing structures like culverts, bridges, retaining walls, cc road and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 50 metres as directed by engineer. cement concrete grade m-15 and above and pcc blocks clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to a lead of 50 metres from road boundary including removal and disposal of top organic soil not exceeding 150 mm in thickness as directed by engineer.in area of light jungle silt clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. sludge clearance of drains, channels and canals with lift 1.5 mtr and lead up to 50 mtr. "providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level : 1:3:6 (1 cement : 3 fine/ coarse sand : 6 graded stone aggregate 20 mm nominal size). " 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) brick work with fps bricks of class designation 75 in foundation and plinth in: cement plastering including t&p, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand) reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : including providing /mixing of synthetic fibers compulsorily complying with is 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of cement i.e. 125 gms per 50 kg cement up to 900 gms per cum of concrete/ mortar. "reinforcement for r.c.c. work at all levels including straightening, cutting, bending, placing in position and binding all complete." centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete. wrought iron and mild steel welded work) (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately. providing and fixing of reinforced ferro-cement drain covers designed for 'a' class loading duly marked on cover with adequate steel reinforcement having thickness 75mm to 150mm anti corrosive bitumen painted m.s. plate , rim and m.s. lifting hooks, admixtures like plasticizer, bond improving compound, shrinkage, resistance compound, abrasion resistant complete as per approved design etc.standard size 2100x500mm (150mm thick) for span 1201 to 1500mm dismantling of flexible pavements for sewer line and manholes and disposal of dismantled materials up to a lead of 50 metres as directed by engineer including allowances for any additional dismantling beyond the drawings (measurement for payment to be as per standard drawings), re-handling of material/earth to complete the task. bituminous courses granular courses "providing, laying, spreading and compacting of granular sub-base by providing close graded material, mixing in a mechanical mix plant at omc, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per mort&h specification clause - 401 including all material, labour, machinery, lighting, guarding and maintenance of diversion. grading - i material" providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (wmm) base course comprising of graded stone aggregate and granular material conforming to mort&h specifications (table 400-ii) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per mort&h specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. providing and applying tack coat on the prepared surface with bitumen emulsion as per is: 8887 and approved quality @ 0.2 kg/sqm with the help of spray set fitted on bitumen container (boiler) after cleaning the surface with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of mort&h specification including all material, labour, machinery lighting, guarding and maintenance of diversion. providing and laying 50-75 mm compacted thick design mix (approved by engineer) dense bituminous macadam on prepared surface with specified graded crushed aggregates as per table 500-9, 500-10 with bitumen binder set (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) for base/ binder course including loading of material with f.e. loader, heating and mixing of stone aggregate, filler and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control as per clause 504.3.5 to the required level and grade, compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa to achieve the desired density (approximately 2.3 tonne/cum) complete as per clause 507 of mort&h specification but excluding primer/tack coat, including all material, labour, machinery, lighting, guarding and maintenance of diversion. grade-ii with bitumen vg-grade 30 @ 4.25 %, lime filler @ 2% (percent by weight of total mix) providing and laying 30-45 mm compacted thickness bituminous concrete as per design mix (approved by engineer) on prepared surface with specified grade stone aggregate as per table - 500-18 with bitumen for wearing course including loading of aggregate with f.e. loader and hot mixing of stone aggregate and bitumen (including cost of anti stripping compound minimum 1% in lime/cement as per design wherever required) in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensing device (as per clause 504-3.5) to the required level and grade and compacting by power rollers and vibratory rollers or 150 to 250 kn pneumatic tyred roller with tp = 0.7 mpa, to achieve the desired density complete as per clause 509 of mort&h specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding primer/tack coat. grade-ii with bitumen vg-grade 30 @ 6% (percent by weight of total mix)

State Government

TRN :35922439 | 04 Dec, 2025

Tender Value : 0

Yavatmal - Maharashtra

Tender for gem bids for ria tube without cap 100 nos pack disposable esr tubes100 nos packet sheep blood agar plates mac conkeyagar plate muller hinton agar plate lab grade glycerin elisa hcv edta k3 double cap violet 100 tube pack clotactivator double cap red100 tube pack sodium citratetube ptnir double cap100 tube pack fluroid tube doublecap 100 tube pack agar agar powder 500 gms diagnosticsensitivity agar 500 gms potassium tellurite agar 500 gms monsurs gelatin taurocholate trypticase tellurite agargtta 500gms triple sugar iron agar 500 gms meresaagar base 500 gms dnase agar with toludine blue 500 gms mannitol salt agar msa 500 gms xylose lysinedeoxycholate xld 500 gms deoxycholate citrate agardca 500 gms hicrome staph agar base modified 500 gms ssa salmonella shigella agar 500 gms hichrome uti agarwith selective supplement 500 gms l- pyrrolidonyl-b-naphthylamide pyr agar 500 gms l- pyrrolidonyl-b-naphthylamide pyr broth 500 gms gelatine powder 500gms soyabean casein digestive medium 500 gms decarboxylase base hi veg 500 gms hugh liefson glucosemedium500 gms pyruvate powder 500 gms potassiumtellurite lr 25 gm bacteriological peptone water 500 gms andrade peptone water base 500 gms motility medium sbase 500 gms bile broth base 500 gms trypticase soyabroth 500 gms mr-vp media 500 gms lofflers mediumslant 25 nos slant lowenstein jensens medium slant 100nos per unit sda with cycloheximide 500 gms yeastextract agar 500 gms hi-chrome candida differential agar500 gms hi-chrome candida differential agar with selectivesupplement 500 gms corn meal agar 500 gms dermatophyte test medium 500 gms dermatophytesupplement 500 gms cooked meat medium rcm 500 gms meat extract general and diagnostic purpose 500 gms bid number gem2025b6906435 dated 19-11-2025 bid document1 86 1 1 thioglycolate medium 500 gms, blood culture bottel withbrain heart infusion broth 50 ml per bottle, blood culturebottel with brain heart infusion broth 20 ml per bottle, nitrate broth 50 gms, andrades indicator 125 ml, aceton99 per 5 ltr, hydrochloric acid gr 2.5 ltr, safranine 100gm, sulphuric acid gr 2.5 ltr, ethyl alcohol gr 1 ltr, xylene 1 ltr, glycerine 2.5 ltr, hydrogen peroxide 500 ml, formaldehyde solution 37.4 perw oblligev 5 ltr, phenolcrystals, sodium hypochlorite solution 5 ltr, dpx mount250 ml, d-glucose powder 500 gm, lactose powder 500gm, maltose powder 500 gms, sucrose powder 500 gms, mannose powder 500 gms, mannitol powder 500 gms, raffinose hydrate powder 50 gm, d- arabinose powder 50gm, inulin powder 50 gm, d-trehalose powder 50 gm, sorbitol powder 50 gm, l-lysine monohydrate powder 50gm, l- ornithine monohydrate powder 50 gm, l-argininepowder 50 gm, nnnn tetramethyl p pheniline diaminedihydrochloride wursters reagent 25 gm, urea ar 500 gms, garbage bag, antiseptic lotion, sodium hydroxide 500gms, d- xylose 25 gm, onpg o nitrophenyl b-d galactopyranoside 50 gm, isoamyl alcohol 2.5 ltr, nigrosin solution10 per100 ml, india ink 100 ml, koh potassium hydroxidepellets 500 gm, alberts stain -a 500 gms, alberts stain -b500 gms, gram staining kit 6 set, zn staining kit 6 set, geimsa staining kit 3 set, potassium dihydrogen phosphate500 gms, sulfanilic acid, potassium nitrate 500 gms, alpha naphthylamine 500 gms, acetic acid glacial 2.5 ltr, p- dimethylaminobenzaldehyde 500 gms, sodiumdeoxycholate 100 gm, indol reagent kovacs 500 ml, methyl red powder 50 gm, alpha naphthol 500 gm, potassium iodide 500 gm, methyl alcohol 2.5 ltr, spirit 2.5ltr, toluidine blue 25 gm, amido black 25 gm, glycerol tributyrate, buffer tablets 50 gm, leishman stain 100 ml, nitro blue tetrazolium chloride nitro b.t. 2 gm, potassiumpermanganate 500 gms, ammonium per sulphate 500 gms, ammonium dihydrogen orthophosphate 500 gms, bile salt500 gms, cupric sulphate 500 gms, tris buffer 500 gms, magnesium citrate 500 gms, magnesium chloride 500 gms, potassium chromate 500 gms, potassium dihydrogenorthophosphate 500 gms, paraffin liquid 100 ml, ccl4carbon tetra chloride 500 ml, glutaraldehyde 500 ml, tween 80 500 ml, formalin 5 ltr, magnesium sulphate 500gm, silver nitrate 500 gms, ammonium bismuth 500 gms, mercuric chloride 500 gms, aesculin 5 gm, sodiumdeoxycholate 50 gm, lead acetate powder 50 gm, phenolred 100 gm, dulcitol 10 gm, coomarisic brilliant blue 10gm, bromothymol blue 50 gm, n-acetyl n- cystine 10 gm, adonite 10 gm, mellibiose 10 gm, cellibiose 10 gm, asparagine 10 gm, sodium carbonate 500 gms, polymyxinb-sulphate 10 gm, acriflavin 10 gm, l-ramhnose 50 gm, antimicrobial hand wash v2 q2, bio - medical wastecollection bags biohazard bags q2

Central Government/Public Sector

TRN :35910428 | 28 Nov, 2025

Tender Value : 0

Ranga Reddy - Telangana

Tender for gem bids for prelaminated mdf board q3, prelam mdf size 6x3 feet, prelam particle board 18mm thick, tw beading 15x4mm, tw beading 18x4mm, tw beading 20x4mm, tw beading25x4mm, tw beading 25x6mm, ply wood 4mm thick, plywood 6mm thick, ply wood 9mm thick, ply wood 12mmthick, ply wood 19mm thick, pu foam as per mes drawingfd map-ii 02, arm rest, grit paper, knob ss, magneticdoor catcher, decorative aluminium powder coated framefitted at bottom of door, ss wire mess, wire mesh gi, aluminium alloy wire cloth, cp handle for almirah of size150mm, hard rubber shoes for legs of table square pipe25mmx 25mm, hard rubber shoes for legs of tablesquare pipe 18mmx 18mm, hard rubber shoes for legs ofchairs round pipe 20mm, hard rubber shoes for legs oftable square pipe 32mmx 32mm, hard rubber shoes forlegs of table square pipe 38mmx 38mm, stainless steelflat head nut and bolt with washer size 35 to 40 mm, stainless steel flat head nut and bolt with washer size 55 to60 mm, ms nut and bolt 25 mm, ms rack bolt 100mmlong, thread ball in 01kg superior quality, table top fordrawing fd-384, table top for drawing fd-274, table topfor drawing fd-382, table top for drawing fd-293, tabletop for drawing fd-283, table top for drawing fd-275, table top for drawing fd map-ii 03, brass lock for almirahsteel, decorative laminated sheets, varnish for woodsurfaces, touch wood made of acrylic polyurethane, woodprimer, suti or cotton cloth, readymade french polish, synthetic white resin adhesive, llithium soap thickenedgrease, cloth material white unbleached /bid number: gem/2025/b/6880222* /dated: 18-11-2025 & & / bid document1 / 47

Related Searched Keywords : ms table

List of ms-table Tenders

Get ms table Tender Alert...

Related Searched Keywords : ms table

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us