Filters

List of metal-strip Tenders

List of latest metal-strip Tenders in Indian Tenders. Click on any metal-strip Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for metal-strip Tenders.

All-Tenders (443)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35408058 | 09 Oct, 2025

Tender Value : 0

Jabalpur - Madhya Pradesh

Tender for gem bids for n1/5340-167733 strip retaining metallic

Central Government/Public Sector

TRN :35413906 | 27 Oct, 2025

Tender Value : 0

New Delhi - Delhi

Tender for supply of metalized carbon strips suitable for high reach pantographs with auto dropping device add provision as per rdso specification no. rdso.2014/el/spec/0114, rev.0, dt. may 2014..

Central Government/Public Sector

TRN :35414108 | 08 Oct, 2025

Tender Value : 3.99 Lacs

Rajouri - Jammu And Kashmir

Tender for gem bids for inj dexamedefomide 100 mg ml diethyl solvent ether bpip 500ml ketamine hcl 50 mg ml inj vial of 2 ml bupivacaine hcl inj 5mg ml heavy amp of 4 ml isopropanol 60 65 percent and benzalkonium chloride skindisinfectant 63gm 0 point 025 gm in 100 gm fentanylcitrate 2ml 50mcg ml inj fentanyl inj 50 mcg ml vial of 10ml pethedine inj 50 mg in 1 ml amp pheniramine maleateinj 22 point 75 mg per ml amp of 2 ml esmolol 100 mg 10ml inj glycopyrrolate 0 point 2 m g ml 1 ml inj succinylchloline chloride inj 50 mg ml vial of 2 ml sodiumbicarbonate 7 point 5 percent amp of 10 ml hemostaticsponge gelatin 80 mm long 50mm broad 10 mm thick nitroglycerin 5mg ml 5ml inj airway long transparentoropharyngeal set consisting of size 0 1 2 3 4 apparatusanaesthetic facemask with air cushion transparent size1paediatric sterile eo iso who gmp ce certified marked apparatus anaesthetic face mask anitistatic with air cushiontransparent size 2 medium sterile eo iso who gmp cecertified marked apparatus anaesthetic face maskantistatic with air cushion transparent size 3 adult withvalve sterile eo iso who gmp ce certified marked apparatus anaesthetic face mask antistatic with air cushiontransparent size 4 sterile eo iso who gmp ce certifiedmarked apparatus oxygen inhalation portable facemaskdisposable for sterile eo iso who gmp ce certified marked apparatus oxygen portable light weight tubing 122 cmwhite mask adapter and bayonet connection for apparatusoxygen portable light weight detachable flow selector for chest drainage system sterile eo iso who gmp cecertified marked combined epidural spinal sets sterile eoiso who gmp ce certified marked disposable surgicalgown sterile sterile eo iso who gmp ce certified marked ecg electrodes disposable laryngoscope adult bulb for bid number gem2025b6693179 dated 17-09-2025 0 0 bid document1 59 0 0 2 2 laryngoscope infant bulb for, laryngoscope cell 1 point 5 vpencil cell, laryngoscope cells for point, supraglotticdevice with non inflatable cuff and gastric drain port i geltube anesthesia tube size 3 4 and 5 sterile eo iso whogmp ce certified marked, operating pack containing sheetlarge 3 trolley cover 2 surgeon gown 4, paediatricanaesthetic circuit complete non rebreathing system, pressure monitoring line 100cm 200cm male female, pressure infusion bags 500ml, pressure infusion bags 1000ml, t piece in three size, triple lumen catheter kit cannulaguide wire dilator introducer needle, tube endo trachealreinforced pvc size 3 point 0 with out cuff, tube endotracheal reinforced pvc size 3 point 5 with out cuff, tubeendo tracheal reinforced pvc size 4 point 0 with out cuff, tube endo tracheal armoured styllet for, tube endotracheal catheter mount for, tube endo tracheal nasal size2 point 5 without cuff point, tube endo tracheal nasal size3 point 0 without cuff point, tube endo tracheal nasal size 3point 5 without cuff, tube endo tracheal nasal size 4 point 5without cuff, tube endo tracheal nasal metal connectionsize 7 for, tube endo tracheal nasal metal connection size8 for, tube endo tracheal nasal size 5 point 0 with cuff, tube endo tracheal nasal size 5 point 5 with cuff, tubeendo tracheal nasal size 6 point 0 with cuff, tube endotracheal nasal size6 point 5 with cuff, tube endo trachealnasal size 7 point 5 with cuff, tube endo tracheal nasalsize8 point 0 with cuff, tube endo tracheal nasal size 8point 5 with cuff, tube endo tracheal oral with inflatablecuff tube and pilot bag 5 point 5mm internal diameter, tube endo tracheal oral with inflatable cuff tube and pilotbag 5 point 5 mm internal diameter, tube endo trachealoral with inflatable cuff tube and pilot bag 7 point 5 mminternal diameter, tube endo tracheal oral with inflatablecuff tube and pilot bag 8 point 0 mm internal diameter, mask for nebulizer, silicon foleys catheter 2 way 16frballon capacity of 30 50ml, silicon foleys catheter 2 way20fr ballon capacity of 30 50ml, catheter foleys silicon 2way 5 ml size 16 fg, foleys balloon catheter silicon size fr 8, surgical hand gloves size 7 pair of, knife bard parkerblade size 1 fitting commercial no point 10 packet of 6, knife bard parker blade size 1 fitting commercial no point11 point, knife bard parker blade size 1 fitting commercialno point 12 packet of 6, knife bard parker blade size 1fitting commercial no point 15 packet of 6, knife bardparker blade size 2 fitting commercial no point 20 packet of6, knife bard parker blade size 2 fitting commercial nopoint 22 packet of 6, knife bard parker blade size 2 fittingcommercial no point 23 packet of 6, suction drain, skingrafting knife parker modification, strip indicators forsterilisation control for testing sterility of drums, tubingdrainage rubber red corrugated sheet 30 point 5 x 1inj dexamedefomide 100 mg /ml, diethyl solvent etherbp/ip 500ml, ketamine hcl 50 mg/ml inj vial of 2 ml, bupivacaine hcl inj 5mg/ml heavy amp of 4 ml, iso-propanol60-65% and benzalkonium chloride skin disinfectant, fentanyl citrate 2ml 50mcg/ml inj, fentanyl inj 50 mcg/mlvial of 10 ml, pethedine inj 50 mg in 1 ml amp, pheniraminemaleate inj 22.75 mg per ml amp of 2 ml, esmolol 100 mg, 10 ml inj, glycopyrrolate 0.2 m, g/ml, 1 ml inj, succinylchloline chloride inj 50 mg/ml vial of 2 ml, sodiumbicarbonate 7.5% amp of 10 ml, hemostatic sponge gelatin80 mm long, 50mm broad 10 mm thick, nitroglycerin5mg/ml, 5ml inj, airway long transparent oropharyngeal setconsisting of size : - 0, 1, 2, 3, 4, apparatus anaestheticfacemask with air cushion transparent size 1paediatric

State Government

TRN :35396507 | 25 Sep, 2025

Tender Value : 34.27 Lacs

Raigad - Maharashtra

Tender for borewell drilling 150 mm dia by dth machine including transporting of machine at worksite, providing & placing 180 mm dia 6 kg p.v c.casing pipe (l5:4985-1988) & fixing borecap after complation of borewell, yield testing of borewell by 90 degree v notch method for minimum 2 hrs .continously, providing cap for 180 mm dia p.v.c.casing pipe, casing pipe lowering & grouting, solar system, supplying, installing, testing and commissioning of standalone solar submersible pump set . all the above benchmark cost are inclusive of total cost of system as per mnre specifications and its installation, commissioning , transportation , insurance , warranty/gurantee, monitoring and maintained for 5 years. 3 bhp solar pump construction of bandhara, clearing cutting thorny shurbes, bushes , mooleyhills etc. complete, excavation in hard murum/hard man kankar/pebbles, exceeding 1.5m in width including depositing the material as directed with all lead upto 15m and lift into 1.5m including boulders of size less than 0.10cum including dressing etc complete. excavation in soft rock exceeding 1.5m in width including depositing the material as directed with all leads and lifts including boulders of size less than 0.10cum, dressing etc complete. excavation in hard rock exceeding 1.5m in width by blasting including depositing the excavated material as directed with all leads and lifts including boulders of size exceeding 0.10cum including dressing etc complete providing and laying rubble soling below foundation in layers including fillinf with rubble chips murum etc. complete (excluding royalty material) providing and laying in situ cement concrete of grade m-150 of trap / granite / gneiss /quartzite graded metal for pcc with or without surface reinforcement rcc/concreting requiring heavy or spetial type of shuttering for works of gallery ,sluice,spillway crest,spillway down stream face,energy dissipating structure,inteke structure,training walls,piers abutments etc.with concrete mixture considering lead of 50 m with shuttering and scaffolding ,placing ,compacting,curing etc.complete with an initial lead of 50 m and lift of 1.50 m. providing & laying in position tor steel reinforcement including cutting bending binding including cost of reinforcement binding wire etc complete with a lead of 50 m & lift of 1.50 m providing casing embankment using selected previous material available directly from excavation in layers including cost of all other operations such as collection of material spreading material in layer of specified thickness sorting out breaking clods levelling sectioning edges sides watering compacting each layer to density control of not less than 95 percent or as stipulated using vibratory compactor etc complete with lead up to 1km for watering and 6m lift. providing, constructing coffer dam in river basin / dam storages as per type design including excavation, filling, the middle portion with b. c. soil (in gunny bags if requried). providing impervious / semipervious materials on both side of b.c. soil (in gunny bags if required) including ramming, compacting to the satisfaction of engineer-in-charge, till the complction of work including dismantling coffer dam after completion of works and disposing off the material as directed by the engineer-in-charge. providing and fixing 90 cm x 60 cm marble plate engraving 10 cm.height letter ,figures including painting the lefters/ figures withapproved colour and shade complete " "rcc well providing and laying in situ cement concrete in proporation .... of trap metal for foundation and bedding, including balling out water manually, formwork, compacting and curing etc. complete." providing & costing in constructing in situ. c.c of trap granite/ quartzite / gneiss/ metal of approved quality of r.c.c. work as per detailed drawing & design or as directed by engg. in charge including dewatering , ceterind from work,compacting, finishing the formed surface with c.m. 1:3 of sufficient minimum thickness to give a smooth & even surface wherever necessary or roughening if spetial finish is to be provided & curing etc. complete. ( by weight batching & mix design for m-250 & m-300 only use of l&t, acc ambuja, birla gold, manikgad, rajashree etc. cement is permitted excluding m.s or tor reinforcement in r.c.c. m-250grade. 1) r.c.c. m-250for beam " 2) r.c.c. m-250 for vertical wall providing & fixing in position steel bar reinforcement of various diameters for r.c.c. pipes,caps,footing, foundation, slab, beams, columns, canopies, staircase, newels, chajjas, lintels, pardies, coping, fine arches etc. as per detailed designs, drawing & schedule s including cutting, bending, hooking the bars, binding with wires or tack welding & supporting as required etc. complete (including cost of binding wire). tor steel" providing & laying weep holes of 80 mm ac/pvc pipe as per drawing for abutment returns, return walls etc. complete. dewatering the excavatyed trenches and pools of water by using pumps and other devices including disposing of the water to safe distance as directed by engineer-in-charge (including cost of machinery labour fuel )etc complete. providing rubble stone paving 15cm thick in 1:3 cement mor tar over bedding of 15cm thick cement concrete of 1:4:8 propor t ion wi th t rap / grani te / quar tzi te / gneiss metal including st r iking joints and water ing etc. complete." providing internal cement plaster 20mm. thick in two coats in cement mor tar 1:3 wi thout neeru finish, to concrete, br ick sur face, in all posi t ions including scaffolding and cur ing etc. complete. providing uncoursed rubble masonry of t rap / granite / quartzite /gneiss stones in cement mor tar 1:6 in foundation and plinth of innerwalls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and water ing etc.complete." reffiling the trenches with approved excavated material from foundation in 15cm to 20cm layers including watering and compaction etc. complete. providing and fixing in position c.i. dapuri steps or 22 mm dia. m.s. bar step with proper anchorage, etc. and providing and applying 3 coats of anticorrosive paint, etc complete as directed by engineer- in-charge." providing and fixing 90 cm x 60 cm marble plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete providing, constructing coffer dam in river basin / dam storages as per type design including excavation, filling, the middle portion with b. c. soil (in gunny bags if requried). providing impervious / semipervious materials on both side of b.c. soil (in gunny bags if required) including ramming, compacting to the satisfaction of engineer-in-charge, till the complction of work including dismantling coffer dam after completion of works and disposing off the material as directed by the engineer-in-charge. lift 0.00 m to 1.50 m" "switch room excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bd-a- 1/259)" excavation for foundation / pipe trenches in hard murum including removing the excavated material upto a distance of 50 m and lifts as below, stacking and spreading as directed by engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bd-a-2/259) providing and laying in situ cement concrete in m – 15 (1:2:4) grade of trap /granite/quartzite/gneiss metal for foundation & bedding including bailing out water manually, form work compaction & curing, etc complete. providing uncoursed rubble masonry of t rap / granite / quartzite /gneiss stones in cement mor tar 1:6 in foundation and plinth of innerwalls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and water ing etc.complete. "providing second class burnt brick masonry with convent ional/ i.s.type br icks in cement mor tar 1:6 in superst ructure including striking joints, raking out joints, water ing and scaffolding etc. complete " providing and casiting in situ cc of trap /granite/quartzite/gneiss metal of approved quality for r cc work as per detailed drawing and designs or as diredcted by engineer – in- charge including normal dewatering, centering, fromwork,compaction, finishing the formed surface withcm 1:3 of sufficient minimum thickness to give a smooth and even surface wherever necessary or roughening if special finish to be provided and curing, etc complete. slabs b) in rcc m-200" providing internal cement plaster 20mm. thick in two coats in cement mortar 1:3 without neeru finish, to concrete, brick surface, in all positions including scaffolding and cur ing etc. complete. item no 8 :- filling the plinth & floors murum bedding in trenches with approved murum from excavatyed materials form foundation 15 cm. to 20 cm. layers including watering and compaction complete. providing and laying cement concrete flooring 40 mm thick wi th m15 cement concrete laid to proper level and slope in alternate bays including compact ion, fi lling joints, marking lines to give the appearance of t i les of 30 cm x 30 cm or other size laid diagonally / square etc finishing smooth (wi th ext ra cement ) in any colour as directed and cur ing etc. complete. with natural sand providing and fixing frame wi th / wi thout ventilator of size as specified with country cut teak wood for doors and windows including chamfering, rounding, rebat ing, iron holdfast of size 300mm x 40mm x5mm with oil paint ing, etc. complete item no. 11 :- providing and fixing count ry cut teak wood double or single leaf panelled shut ters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detai led drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work wi th oil paint ing 3 coats complete item no. 12 :- providing and fixing count ry cut teak wood windows wi th double leaf 25 mm thick planked shutters without ventilators as per detailed drawings including stainless steel fixtures and fastenings and finishingthe wood work wi th oil paint ing 3 coats etc. complete item no.13 :- providing flush grooved pointing with cement mor tar 1:3 for stone masonry work including scaffolding and curing etc. complete. item no.14 :- providing and applying washable oil bound distemper of approved colour and shade to old/ new surfaces, in three coats including scaffolding, preparing the surface to receive the priming coat and finishing coat etc. complete. item no. 15 :- providing and fixing locking arrangement the standered qualityof lock for pump house, etc complete item no. 16 :- providing and fixing in position steel bar reinforcement of various diamenters for rcc piles, caps, footing, foundation, slabs, beams, columns, canopies, staircases, newels,chjjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking he bars, binding with wires or tack welding and supporting as required, etc. complete.(including cost of binding wire) "pumping machinery item no. 1 :- providing, erecting and giving test of submersible pump set conforming to is 8034 and motor conforming to is 9283, with water proof winding. pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415 v ± 10%, 3 ph, 50 hz a.c. supply, with cable guard, thrust carbon / fiber bearing to withstand entire hydraulic thrust. the pump set shall be suitable for direct coupling, with suitable suction strainer. pump should have suitable discharge out let as per manufacturer's design. antithrust stream lined non return valve shall be provided with the pump. 3 m submersible copper conductor cable in single / double run and 2 pairs of suitable size erection clamp 10 mm thick shall be provided with each pump. submersible pump 150 mm dia (with bronze / stainless steel (cf8m) impeller) up to 8 stages" "item no. 2 :- supplying and erecting, flat flexible submersible cable with, copper conductor, pvc insulated, and pvc sheathed. 3 core 10sqmm" "item no. 3 :- supplying and erecting fully automatic star delta starter to operate squirrel cage induction motor working on 380- 440 volt, 3 phase, 50 hz with no volt coil, over load element, and on off push buttons, with necessary material and connected to supply, etc complete. starter with original sheet steel encloser. > 7.5 hp & up to 12.5 hp" item no.4 :- providing , installing & commissioning main control pannel board including v.meter & a. meter of suitable range single phase prevention 8 nos. of phase indicater lamps with colour glass of 230 v rotary switch over load capacitor suitable for 7.50hp and 12.50bhp pump etc.complete. (market rate) "item no.5 :- providing, erecting pressure gauge of required range complete with syphon tube, isolating cock suitable for 12 mm dia g.i. pipe. pressure gauge shall be installed as directed, with tapping on rising main. pressure gauge (100 mm dia)" item no.6 :- providing tools for pumping. item no. 7 :- main wiring work from m. s. e. b. cut out to the panel board 4 core x 459 mm 1100 grade with i. s. i. mark standard / aluminum armored cable (94.1 p.36) item no. 8 :- providing pipe type earthing with 40mm. dia. g.l. pipe or 20 mm dia. g.l. rod complete with all materials as per specification no. ea-ep "solar pump item no.1 :-supplying, installing, testing and commissioning of standalone solar submersible pump set . all the above benchmark cost are inclusive of total cost of system as per mnre specifications and its installation, commissioning , transportation , insurance , warranty/gurantee, monitoring and maintaince for 5 years " "rising main item no. 1:- providing and supplying in standard lengths polyethelene pipes, confirming to is 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding gst levied by gi & gom in all respect etc. complete. 75 mm dia hdpe pipe 8 kg/sqcm" 75 mm dia hdpe pipe 8 kg/sqcm item no.3 :- 5% of cost of pipes shall be considered for cost of pvc/hdpe specials for estimate purpose only. "item no. 4 :- providing, erecting, connecting double flanged short body pattern tye manually operated butterfly valve having body, disc and end cover in graded cast iron to is 210 gr. cf 200 generally conforming in bs 5155, synthetic rubber faced ring secured on disc by retaining ring with stainless steel screw stub shaft of stainless steel riding in teflon bearings excluding c.c. foundation/ structural steel support confirming to is 3095-1991. sluice valves 80 mm dia for washout" "item no. 5 :- providing and supplying air valves as per is-10845 and mjp’s standard specifications of approved mark and quality of following diameters including all taxes (central and local), railway fright, inspection charges unloading from railway wagons, loading into truck, transportation upto departmental stores/ site, unloading and stacking etc. complete. air valves 15 mm dia" "item no.6 :- excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (earth soil)" "item no. 7 :- excavation for foundation/pipe trenches in hard murum and boulders, w.b.m. road including removing the excavated material upto a distance of 50 m beyond the area and lifts as below, stacking and spreading as directed by engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back- filling, etc. complete. (hard murrum)" "item no.8 :- excavation for foundation/ pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 m beyond area and lifts as below, stacking as directed by engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. soft rock" "item no.9 :- excavation for foundation / pipe trenches in hard rock by controlled blasting, including trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the area and lifts as below, normal dewatering, excluding backfilling, etc. complete. lift 0 to 1.5 m hard rock" item no. 10 :- filling in plinth and floors murum bedding in trenches with approved murum from foundation 15 cm to 20 cm layers including watering and compaction complete. "item no. 11 :- lowering, laying and jointing h. d. p. e./ m. d. p. e. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent is code complete with all materials for jointing procedure like electrofusion machine, electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per is-7634 part ii 75 mm dia hdpe pipe 8 kg/sqcm" 75 mm dia hdpe pipe 8 kg/sqcm "item no. 12 :- lowering laying and jointing in position following c.i.d/f reflux valves butterfly valves and sluice valves including cost of all labour joining material, including not bolts and giving satisfactory hydraulic testing etc. complete. (rate for all class of sluice valves) sluice valves 80 mm dia for washout" "item no. 13 :- lowering, laying and fixing in proper alignment and position all types of c.i. air valves as directed by engineer in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc complete. air valves 15 mm dia" "item no. 14 :- providing and fixing in position air valve shaft including providing and fixing gi medium class or 6 mm thick m.s. pipe shaft 2.70 m long over branch flange of air valve tee, providing pcc block of m-150 concrete 150 mm thick around the air valve tee including encasing of vertical shaft in pcc m-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by engineer-in-charge for following diameters of pipe lines (type design attached.) upto 150 mm on murum & harder strata" item no 15 :- providing and laying in situ following grades of c.c. of trap/granite/quartzite/gneiss metal for foundation and bedding including dewatering, form work, compacting and curing, finishing etc. complete. "item no. 15 :- providing and constructing b.b. masonry valve chamber with 15 cm thick 1:3:6 proportion pcc bedding, including excavation, b.b. masonry in c.m. 1:5 proportion 12 mm thick cement plaster in cm 1:4 proportion on both sides with providing and fixing c.i. manhole frame and cover in rcc 1:2:4 coping or cm thick slab etc. complete as directed by engineer-in-charge. size 0.90 x 0.60 x 1.20" item no. 16 :- refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete "item no. 17 :- hydraulic testing of h. d. p. e./ m. d. p. e. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. the rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 75 mm dia hdpe pipe 8 kg/sqcm" "distribution system item no .1 :- providing and supplying in standard lengths polyethelene pipes, confirming to is 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i.e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding gst levied by gi & gom in all respect etc. complete. 63 mm dia hdpe pipe 6 kg/sqcm" item no. 2 :- 5% of cost of pipes shall be considered for cost of pvc/hdpe specials for estimate purpose only. "item no.3 :- providing double flange sluice valve confirming for is- 14846 including worn gear arrangements as per test pressure, stainless steel spindle, caps, including inspection charges, transportation upto departmental store, unloading, stacking excluding gst levied by goi & gom in all respect etc. complete sluice valves 50 mm dia" "item no 4 :- excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bd-a-1/259) earth soils" "item no. 5 :- excavation for foundation / pipe trenches in hard murum and boulders, w.b.m. road including removing the excavated material upto a distance of 50 m beyond the area and lifts as below, stacking and spreading as directed by engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bda-3/259) hmb" "item no. 6 :- excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 m beyond the area and lifts as below, stacking as directed by engineer-incharge, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. (bd-a-4/259) soft rock" "item no. 7 :- excavation for foundation / pipe trenches in hard rock and concrete road by chiselling, wedging, line drilling by mechanical means or by all means other than blasting including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the area and lifts as below, stacking as directed by engineer-in-charge, normal dewatering, excluding backfilling, etc. complete by all means. (bd-a-6/259) hard rock" item no. 8 :- filling in plinth and floors murum bedding in trenches with approved murum from excavated materials from foundation in 15 cm to 20 cm layers including watering and compaction, etc. complete. (bd-a-10/263) "item no. 9 :- lowering, laying and jointing h. d. p. e./m.d. p. e. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent is code complete with all materials for jointing procedure like electrofusion machine, electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per is-7634 part ii 63 mm dia hdpe pipe 6 kg/sqcm" "item no. 10 :- lowering, laying and jointing in position following c.i.d/f reflex valves, butterfly valves and sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc. complete. (rate for all class of valves.) sluice valves 50 mm dia" "item no. 11 :- providing and laying in situ cement concrete of trap/ granite / quartzite /gneiss metal for rcc work in foundation like raft, grillage, strip foundation and footing of rcc columns and steel stanchions including normal dewatering,form work, compaction, finishing and curing, etc. complete. (by weigh batching and mix design for m250 and m-300 only. use of l&t, a.c.c., ambuja, birla gold, manikgad, rajashree, etc. cement is permitted.) (excluding m.s. or tor reinforcement) a) 1:2:4 (m-150) grade " "item no. 12 :- providing and fixing c.i. road box including loading, unloading and carting to site of work including all necessary excavation in all types of strata and fixing in murum packing, etc. complete. 100 mm x 225 mm (20 kg) " item no. 13 :- refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete "item no. 14 :- hydraulic testing of h. d. p. e./ m. d. p. e. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour, operation charges, etc. required for testing. the rate under this item shall also include cost of retesting, if necessary and reinstating to original position. 63 mm dia hdpe pipe 6 kg/sqcm" item no. 15 :- providing and fixing board displaying information, such as 'name of work, tender cost, name of contractor, work completion and liability period etc', having rectangular shape of 1.20 m x 0.90 m size made out 18 gauge (1.25 mm) thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border /messages /symbols etc. with approved colour shade paint complete, on m.s.angle of size 35 x35 x3 mm frame with properly cross braced m.s.angles of size 35 mm x 35 mm x 3 mm duly painted including two m.s.angle iron posts of size 65 mmx 65 mmx 6 mm, 3.65 m long painted withal ternate black and white bands of 25 cm width including all fixtures etc. and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete.spec. number as directed by engineer in charge morth 801 item no. 16 :- providing and making upvc/mdpe pipe consumer service connection on distribution main by drilling hole with suitable means , including all labour , upvc/mdpe pipe of required length with or without road crossing as described below, including cost of specials like saddle/clamp saddle of suitable material, and diameter suitable for distribution main, 15mm /20mm/ 25mm respective dia heavy duty brass/polyprophylyne(twin jacketed ) ferrule , male and female thread adapter elbow, bends,couplers ,tees, clamps of suitable material and sundry materials as per requirment, including providing and fixing medium duty 15.mm brass bib tap, gi casing pipe of suitable diameter of 32mm/ 40mm/ 50mm respectively of required length for road crossing, including requird labour for excavation in all types of strata up to the depth of 0.75m or as per site requirement,all types of plumbing fittings, refilling , closing the water supply in that area, dewatering, hydraulic testing and restarting the water supply ,transportation of material etc. complete as directed by engineer in "trial run item no. 1 commissioning, running and maintaining the scheme to quantities, rated capacity, including manning necessary personnel such as operator, valveman, etc. as per requirements of the scheme and who should also administer chemical dose for a period of 1 month for individual scheme and for regional scheme, together with training of personnel spared by mjp / local body and handing over the scheme to local body after completion of the above period as directed by engineer-in-charge.note: required chemicals to be supplied by department free of cost and electricity bill will also be paid by the department.for singlvillage" piped water supply scheme at - adnale tal- tala

Central Government/Public Sector

TRN :35397549 | 27 Sep, 2025

Tender Value : 0

Hisar - Haryana

Tender for gem bids for procurement, lv2 icvs 2450720465915 or 2540001847 765 12 sb224shock absorber lv2 icvs 4720720409046 765 07 13hose lv2 icvs 4720720260274 765 07 24 hose lv2icvs 5330014856 700 40 258 gasket lv2icvs 5330014060 748 25 338 gasket lv2 icvs 5330018774 kb 05100 gasket lv2 icvs 4720001223 765 05 726 hose nonmetalic lv2 icvs 5330127001572 765 05 172 gasket lv2 icvs 4330000192 675 05 sb154 strainer assyfilter lv2 icvs 765-05-369 or 369k canvas cover lv2 icvs 5330720115189 kb 05 98 gasket lv2 icvs5330014024 700 40 260 06 gasket lv2 icvs5330009126 765 06 311 gasket special lv2 icvs5330021953 765 06 394 felt mechanical performed lv2 icvs 5330380692 765 06 842k sealing ring lv2icvs 5330395594 730 04 225 gasket lv2 icvs5330019129 765 06 135 gasket lv2 icvs 765-08-928 or765 08 928k ringgasket lv2 icvs 5330720113847 76510 1009 gasket lv2 icvs 5330009176 765 10 1380gasket lv2 icvs 5330020518 765 10 1435 gasket lv2icvs 5331720324411 765 12 801 ring lv2 icvs5340720270534 765 17 28 boot lv2 icvs5340720270538 765 17 46 boot lv2 icvs 534013744765 31 13 ring sealing torodial lv2 icvs 5315008293 765 32 93 lock pin lv2 icvs 5315 008295 76533 7 pin lock lv2 icvs 530 024921 700 40 123 gasket lv2 icvs 5330 021358 765 33 6 ring sealing torodial lv2 icvs 5335000891 701 212 619 packing performed lv2 icvs 5340013718 765 33 40 ring sealing torodial lv2 icvs 5330397585 cqa icv set 025 cup and springset lv2 icvs 5330397587 cqa icv set 027 cup andspring set lv2 icvs 5330720115461 765 38 242 gasket lv2 icvs 5330 383897 54 09 058 packing ringperformed z22 5340178656 675 42 sb129 belt z22 bid number gem2025b6694051 dated 17-09-2025 0 0 bid document1 93 0 0 2 2 ged 675 42 70 cap, z22 5330381465 675 42 77 gasket, lv2 icvs 5330394338 765 50 1898 gasket, lv2 icvs3030 720153540 765 50 sb951 belt, lv2 icvs5330020293 765 50 878 gasket, lv2 icvs5340720368156 765 50 1552 buffer, lv2 icvs5340010824 765 50 1553 buffer, lv2 icvs 5330022538730 50 366 gasket, lv2 icvs 5331720323819 775 22 38ring, lv2 icvs 5340179886 765 50 sb599 hose, lv2icvs 5340179885 765 50 sb600 hose, lv2 icvs5340015314 765 51 46 bumper, n1 675 51 335 cover, n1 675 51 sb124 cover assy, v5 rus 675 53 sb147hose, v5 rus 775 36 25 ring, lv2 icvs 5330014023 70040 260 05 gasket, lv2 icvs 5330014026 700 40 260 08gasket, z7 rus 765 56 92 gasket, z7 rus 765 56 93gasket, z7 rus 765 56 105 gasket, v5 rus 765 66 204ring, v5 rus 765 66 226 packing, v5 rus 765 66 sb106cleaner, v5 rus 765 66 193 gasket, lv2icvs 5330720117066 765 69 66 packing, k9 bmp nbc 765 71 341end piece, k9 bmp nbc 675 71 285 gasket, lv2icvs5330 025020 765 50 2600 gasket, k9 bmp nbc 675 71307 gasket, k9 bmp nbc 4720016672 675 71 342 hose, lv2 icvs 5330335544 765 50 2601 seal rubber strip, lv2 icvs 5330400001910 675 50 380 nbc cover gasket, lv2 icvs 5335000888 765 50 2008 packing performed, lv2 icvs 5330015648 765 50 1410 gasket, lv2 icvs5330 127001631 765 46 247 gasket, lv2 icvs5330020080 765 46 228 gasket special, lv2 icvs2530720255433 765 17 363 rubber boot, lv2 icvs5330396570 765 17 368 gasket, lv2 icvs5330610120936 765 17 427 gasket, z22 675 73 381packing, lv2icvs 5330019825 765 82 193 gasket, z7765 56 105 gasket, k9 bmp nbc 765 71 1463 gasket, k9 bmp nbc 765 71 1462 gasket, n1 675 51 sb 126mantle cover, k9 bmp nbc 765 71 362 spacer, lv2icvs 5330031409 765 50 752 gasket, n1 675 51 95packing, n1 675 51 95 01 packing, z1 misc 675 86 23gasket, k9 bmp nbc 675 71 225 gasket, k9 bmp nbc675 71 224 gasket, lv2icvs 3120100011 765 17 619bushing sleeve, lv2 icvs 2590001625 765 58 216casing flexible shaft assy, lv2 icvs 5330023914 67558 132 packing, lv2 icvs 765 78 sb724 hose, lv2 icvs4720002283 765 78 717 hose non metalic, lv6 mt6v1180 vnschkhl gost 1284 1 80 1284 3 80 drive belt, z6 misc 730 82 219 boot rubber, z6 misc 775 97 11 or54 26 390 2 boot rubber, z6 misc 240 64 47 rubberend piece, z6 misc 775 97 11 boot rubber, lv2 icvs5330017233 765 10 sb 521 packing assy, lv2 icvs5330021648 765 10 385 gasket, lv2 icvs 4720 001668765 10 948 hose, lv2 icvs 5330 023756 765 10 835gasket, x2 misc tu 16 522 001 76 fuse sp 10a 30v, lv2icvs 5330 021388 765 10 1121 gasket, lv2 icvs 5340184794 765 10 922 or 765 10 2390 packing, lv2 icvs4710002908 765 10 1579 branch pipe assy, x2 misc tu16 522 001 76 fuse pv 100as 30v, lv2icvs 3120 100011765 17 619 bushing sleeve, lv2icvs 5330 024301 76578 70k packing performance, lv2icvs 5330 024891765 78 71 k1 packing, x2 misc tu 16 522 001 76 fuse pv10a 30v, x2 misc tu 16 522 001 76 fuse pv 20a 30v, x2misc tu 16 522 001 76 fuse pv 40a 30v, x2 misc tu 16522 001 76 fuse pv 50a 30v, lv2 icvs 5340 184821 76533 sb111 or sb193 bumper, lv2 icvs cqa icv set 023765 31 sb128 cup and spring, k9 bmp nbc 675 71 291gasket, lv2 icvs 765 50 1429 packing rh, lv2 icvs5330 014069 675 58 62 felt mechanical preformed, //bid details2 / 93 lv2icvs 5330 24893 700 40 261 gasket, lv2 icvs4720002835 40u12 1 3 13 hose 12 mm dia x4 mmthickness, lv2 icvs 4720002801 40u22 1 3 13 hose 22mm dia x5 mm thickness, lv2 icvs 40u32 0 7 7 hose 32mm dia x6 2 mm thick, lv2 icvs 5330 026463 765 101648 gasket, lv2 icvs 4720 001238 765 05 sb 311 hoseassy rubber, lv2 icvs 4720 001238 765 05 sb 312 hoseassy rubber, lv2icvs 4720 003828 765 82 sb394 hoseassy, lv2icvs 5330 020224 765 46 352 gasket special, v5 au.8.683.013 gasket, v5 au.634.173 gasket, v5 76510 1170 gasket, lv2icvs 765 50 2596 gasket, lv2icvs765 50 2597 gasket, lv2icvs 765 78 1169 ring packing, lv2icvs 765 33 54 ring sealing torodial, lv6 mt73310 000144 bearing ball single row 65x140x33 mm, lv2icvs 765 49 55 frame, lv2icvs 765 50 2582 gasket, z7 rus tv16.535.913 74 lamp 27 110, z7 rus gost 220480 lamp 26, z7 rus ty 28 4.8 ty lamp cm28 4.8lv2 icvs 2450720465915 or 2540001847 765 12 sb224shock absorber, lv2 icvs 4720720409046 765 07 13hose, lv2 icvs 4720720260274 765 07 24 hose, lv2icvs 5330014856 700 40 258 gasket, lv2icvs 5330014060 748 25 338 gasket, lv2 icvs 5330018774 kb 05100 gasket, lv2 icvs 4720001223 765 05 726 hose nonmetalic, lv2 icvs 5330127001572 765 05 172 gasket, lv2 icvs 4330000192 675 05 sb154 strainer assyfilter, lv2 icvs 765-05-369 or 369k canvas cover, lv2icvs 5330720115189 kb 05 98 gasket, lv2 icvs5330014024 700 40 260 06 gasket, lv2 icvs 5330009126765 06 311 gasket special, lv2 icvs 5330021953 765 06394 felt mechanical performed, lv2 icvs 5330380692765 06 842k sealing ring, lv2 icvs 5330395594 730 04225 gasket, lv2 icvs 5330019129 765 06 135 gasket, lv2 icvs 765-08-928 or 765 08 928k ring, gasket, lv2icvs 5330720113847 765 10 1009 gasket, lv2 icvs5330009176 765 10 1380 gasket, lv2 icvs 5330020518765 10 1435 gasket, lv2 icvs 5331720324411 765 12801 ring, lv2 icvs 5340720270534 765 17 28 boot, lv2icvs 5340720270538 765 17 46 boot, lv2 icvs534013744 765 31 13 ring sealing torodial, lv2 icvs5315 008293 765 32 93 lock pin, lv2 icvs 5330014024700 40 260 06 gasket, lv2 icvs 5315 008295 765 33 7pin lock, lv2 icvs 530 024921 700 40 123 gasket, lv2icvs 5330 021358 765 33 6 ring sealing torodial, lv2icvs 5335000891 701 212 619 packing performed, lv2icvs 5340013718 765 33 40 ring sealing torodial, lv2icvs 5330397585 cqa icv set 025 cup and spring set, lv2 icvs 5330397587 cqa icv set 027 cup and springset, lv2 icvs 5330720115461 765 38 242 gasket, lv2icvs 5330 383897 54 09 058 packing ring performed, z22 5340178656 675 42 sb129 belt, z22 ged 675 42 70cap, z22 5330381465 675 42 77 gasket, lv2 icvs5330394338 765 50 1898 gasket, lv2 icvs 3030720153540 765 50 sb951 belt, lv2 icvs 5330020293 76550 878 gasket, lv2 icvs 5340720368156 765 50 1552buffer, lv2 icvs 5340010824 765 50 1553 buffer, lv2icvs 5330395594 730 04 225 gasket, lv2 icvs5330022538 730 50 366 gasket, lv2 icvs5331720323819 775 22 38 ring, lv2 icvs 5340179886765 50 sb599 hose, lv2 icvs 5340179885 765 50 sb600hose, lv2 icvs 5340015314 765 51 46 bumper, n1 675 51335 cover, n1 675 51 sb124 cover assy, v5 rus 675 53sb147 hose, v5 rus 775 36 25 ring, lv2 icvs5330014023 700 40 260 05 gasket, lv2 icvs 5330014026700 40 260 08 gasket, z7 rus 765 56 92 gasket, z7 rus765 56 93 gasket, z7 rus 765 56 105 gasket, v5 rus

Central Government/Public Sector

TRN :35397601 | 25 Sep, 2025

Tender Value : 0

Lucknow - Uttar Pradesh

Tender for gem bids for copper alloy tapsstop valves v2 conforming to is 8931q3 plastics bib taps pillar taps angle valves and stopvalves as per is 97632000 latest q3 connection pipewith nuts v2 q3 tower bolts ferrous metals as per is204 q3 wire mesh fabric or cloth v2 as per is 1568q3 alm hydraulic door closer brass internal fittingspindle for 15mm bib tap gi pipe med grade 20mm kitchen rack stainless steel 24inch x 24inch x 10inch plainglass sheet 3mm thick size 4 feetx 3feet pvc internalfitting for llc cistern 10 ltrs capacity pvc swr pipe110mm 3 mtr length wc indian type vitreous china whiteorrissa pattern size 580x440mm alm door stopper floor75mm aluminium sheet 063mm thick in 4feet width x10mtr roll cement of 50 kg bag cp brass ss towel rail20mm dia 450mm long flashing tape bitumen sealingtape of size 15mtr x 100mm x 1 point 5mm thick frostedglass sheet 3mm thick size 6 feetx4feet gi pipe med grade15 mm isi marked gi pipe med grade 25mm isi marked gi socket 15mm ms door spring rat rail type 200mm mspowder coated curtain rod 20mm dia in 12 feet length oilputty wood pvc swr pipe 75mm type b 3mtr length tower bolt almn 200 mm vitreous china urinal white flatback of size 465x355x265mm wash hand basin whitevitreous china of size 550x400mm wc european typewhite vitreous china alm butt hinge 100mm brassinternal fitting spindle long for 15mm dia concealed stopcock ss grating round 100mm dia ss grating round100mm dia with waste hole gi elbow 15mm gi elbow20mm gi union socket 15mm gi union socket 20mm ms butt hinges 100 mm ms butt hinges 75 mm ms nailswire 25mm ms plug 15mm ms plug 20mm ms screwwood 25mm in 100nos pkt ms screw wood 35mm in100nos pkt ms sliding door bolt 250mm complete with nut bid number gem2025b6638053 dated 15-09-2025 bid document1 137 1 1 bolt, m seal 100gm pack, pvc handle suitable for llflushing cistern 10ltrs capacity, pvc swr bend 100mmwith access door, pvc swr bend 75mm with access door, sliding door bolt almn 250mm, sliding door bolt ms 300mm, white cement 1 kg pack, ss brackets for 20 mm curtainrods, ss wall to wall brackets for 20 mm curtain rods, ssfinials for 20 mm curtain rods, full turn spindle 3 no, mixture spindle, tank cover for 500 or 1000 ltr tank, whbglass shelves 8 mm thick in rectangular shape of 45x12 cm, yellow color road stud of abs material, solar light roadstud of aluminium material, convex mirror of size 40 inchfor road, factory made flush shutter of size 900 x 2100 x35 mm, plain glass sheet 4mm thick size 2feetx 3feetfrosted, glass pane 3 feetx2feetx4 point 8mm plain, glasspane 3feetx2feetx4mm plain, wire mesh zero point 36mmnormal dia, double spring floor machine, door springhelical 150mm, putty for fixing glass, gi tee 20mm, gitank nipple 15 mm dia, gi tank nipple 15 mm dia, haspand staple 75mm dia, gi tee 15mm dia, stainless steelknob for curtain rod 25mm, stainless steel bracket forcurtain rod 25mm, ss wall to wall bracket for 20 mm forcurtain rod isi marked, gi tank nipple 20mm dia, hasp andstaple 100mm size, rubber strip for door seal, 30mm thickwire gauge shutter of size 900 x 2100 mm factory madesolid core s steel 36 gauge, stainless steel knob lock fordoor lock, kitchen plate rack stainless steel 24 inch x 36inch x 10 inch, cp hand shower rose 150mm, pvc pipe32mm, towel rack cp, double action spring hinges mswith steel wire spring stove enamelled black 150mm, rubber beading for ai door, galavanised ms wire clothzero point 63mm dia and average width of aperture 1 point4mm, m.s screws 3 oblique 4inch, gi socket reducer 15 x20mm dia, piano type butt hinges flap 3 oblique 4inch, cpvc pipe 16mm outer diameter 5 mtr length, ms haspand staple wire type stove enamelled 100mm size, mshasp and staple wire type stove enamelled 75mm size, cpvc pipe 20mm outer diameter 5 mtr length, non returnvalve 150mm isi marked, gi tubing 50mm med grade, gitubing 25mm med grade, gi tubing 20mm med grade, gitubing 40mm med gde, gi tubing 15mm med grade, gisocket 25mm, gi union 50mm, gi tee 15mm, gi tee50mm, gi union 15mm, gi union 20mmalm hydraulic door closer, brass internal fitting spindle for15mm bib tap, gi pipe med grade 20mm, kitchen rackstainless steel 24 x 24 x 10, plain glass sheet 3.00mmthick size 4x 3, pvc internal fitting for low level flushingcistern 10 ltrs cap, pvcswr pipe 110mm 3 mtr length, wci type vitreous china white orrissa pattern size580x440mm, alm door stopper floor 75mm, aluminiumsheet 0.63mm thick in 4 widthx10mtr roll, cement of 50 kgbag, cp brass/ ss towel rail 20mm dia 450mm long, flashing tape bitumen sealing tape of size 15mtr x 100mmx 1.5mm thick, frosted glass sheet 3.00mm thick size 6x4, gi pipe med grade 15 mm, gi pipe med grade 25mm, gisocket 15mm, ms door spring rat rail type 200mm, mspowder coated curtain rod 20mm dia in 12 length, oil puttywood, pvcswr pipe 75mm type b, 3mtr length, towerbolt almn 200 mm, vitreous china urinal white flat back ofsize 465x355x265mm, wash hand basin white vitreouschina of size 550x400mm, wc e type white vitreouschina, alm butt hinge 100mm, alm hasp & staple 100mm, brass internal fitting spindle long for 15mm dia concealedstop cock, cpms/ss grating round 100mm dia, cpms/ssgrating round 100mm dia with waste hole, gi elbow 15mm, gi elbow 20mm, gi long screw nipple 15mm- 200mm long //bid details2 / 137

State Government

TRN :35399251 | 03 Oct, 2025

Tender Value : 0

Nagpur - Maharashtra

Tender for gem bids for providing and supplying of modular type switch 6a or 10a providing and supplying of modular types witch 16 providing and supplying of modular type bell push 6a or 10a providing and supplying of modular type two way switch6a or 10a providing and supplying of modular types witch16 or 20a providing and supplying of modular types witchoneway 16 or 20a providing and supplying of modular typed p switch 32a providing and supplying of modular type3pin 6a multi socket providing and supplying of modulartype 3pin 6 or 16a multi socket providing and supplying ofmodular type 6 or 16a fuse providing and supplying of ledstreet lightfitting 26 to 30w street light fitting 40 to 50w providing and supplying of led street light fitting 60w providing and supplying of led street light fitting 70 to 75w providing and supplying of led street light fitting 85 to90w providing and supplying of led street light fitting 100to 110w providing and supplying of led street light fitting120w providing and supplying of street light bracket madefrom 40mm providing and supplying of pvc aluminiumservice wire 2 into 4 sq mm providing and supplying ofpvc aluminium service wire 2 into 6 sq mm providing andsupplying of pvc aluminium service wire 2 into 10 sq mm providing and supplying of msclamp with nut and bolt providing and supplying of single phase 240v street lightcontrol panel upto themax load of 6kw providing andsupplying of single phase 240v street light control panel providing and supplying of 415v street light control panel providing and supplying of 415v street light control panelupto the max load of 6kw providing and supplying of ledflood light fitting max 50w providing and supplying of ledflood light fitting max 70w providing and supplying of ledflood light fitting max 100w providing and supplying of ledflood light fitting max 120w providing and supplying of led bid number gem2025b6681649 dated 17-09-2025 0 0 bid document1 60 0 0 2 2 flood light fitting max 155w, providing and supplying of ledfloodl ightfitting max 195w, providing and supplying ofspmcb 6a to 32a, providing and supplying of spmcb 40a to63a, providing and supplying of dpmcb 6a to 32a, providing and supplying of dpmcb 40a to 63a, providingand supplying of tpmcb 6a to 32a, providing and supplyingof tpmcb 40a to 63a, providing and supplying of fpmcb 6ato 32a, providing and supplying of fpmcb 40a to 63a, providing and supplying of double pole isolator 40a, providing and supplying of quartz electronic time switch, providing and supplying of two pole power contactor 230v12a, providing and supplying of two pole power contactor230v 32a, providing and supplying of four pole powercontactor 430v 16a, providing and supplying of four polepower contactor 430v 40a, providing and supplying of fourpole power contactor 430v 63a, providing and supplying oftriple pole isolators 40a, providing and supplying of triplepole isolators 63a, providing and supplying of triple poleisolators 100a, providing and erecting of fr xlpe insulatedcable 1100 v 4 core 25 sq mm, supplying and erecting andterminating fr xlpe insulated galvanised steel formed wirearmoured cable 1100 v 4 core 35 sq mm aluminium, supplying and erecting fr xlpe insulated galvanised steelformed wire armoured cable 1100 v 4 core 50 sq mmaluminium, supplying and erecting of frxlpe insulated 2core 4 sq mm aluminium conductor, supplying and erectingof frxlpe insulated 2core 4sq mm aluminium conductor, supplying and erecting of frxlpe insulated 3 core 2.5 sqmm aluminium conductor, supplying and erecting of frxlpeinsulated 3core 4sq mm aluminium conductor, supplyingand erecting of frxlp einsulated 3core 6 sq mm aluminiumconductor, supplying and erecting of frxlp einsulated 4core 6 sq mm aluminium conductor, supplying and erectingof frxlp einsulated 4 core 10 sq mm aluminium conductor, supplying and erecting of frxlp einsulated 4 core 16 sqmm aluminium conductor, supplying and erecting of pvcmultistrand copper wire 2.5 mm, supplying and erecting ofpvc multistrand copper wire 4mm, supplying and erectingpvc multistrand copper wire 6mm, supplying and erectingpvc insulated pvc rounds heathed 1.5 sq mm3coreflexiblcuwire, supplying and erecting pvc insulatedpvc round sheathed 2.5sq. mm 50 no into 0.25 3 coreflexibl cu wire, supplying and erecting pvc insulated pvcround sheathed 4sq.mm 56no. into 0.25mmdia. 3 coreflexibl cu wire, supplying and erecting dwc double wallcorrugated pipes50mm, supplying and erecting led lmap3w, supplying and erecting led lmap 5w or 7w, supplying and erecting led lmap 10w or 12w, supplyingand erecting led lmap 14w led, supplying and erectinglmap 18w led, supplying and erecting of led highbayfitting 70w ip65 and ik08 class, supplying and erecting ofled highbay fitting 100w ip65 and ik08, supplying anderecting of led highbay fitting 135w ip65 and ik08, supplying and erecting of fans, supplying and erecting ofceiling fan of 900 or 1050 mm, supplying and erecting ofceiling fan of 1400mm, supplying and erecting of pedestaltype air circulator 450 mm, supplying and erecting ofexhaust fan medium duty 230 v ac 50 cycles 225 mm 1400rpm w, supplying and erecting of fully automatic linevoltage stabilizer buckinput voltage 160 to 270v and outputvoltage 200 to 250v, providing and supplying of fullyautomatic line voltage stabilizer buck, providing anderecting of metal work in crca sheet, providing anderecting of iron work sheet metal work consisting of crca //bid details2 / 60 sheets, supplying of gi sheet 0.6 mm, supplying acrylicsheet 3 mm thick, supplying of epoxy straight through jointoutdoor or indoor for lt xlpe armoured cable 3 into 2.5 to16 sq mm, supplying of epoxy straight through jointoutdoor or indoor for lt xlpe armoured cable3 into 25 to 50sq mm, supplying of epoxy straight through joint outdoor orindoor for lt xlpe armoured cable 3 into 70 to 95 sq mm, supplying of epoxy straight through joint outdoor or indoorfor lt xlpe armoured cable 3 into 120 to 185 sq mm, supplying of streel grip insulation tape., suppying ofhandgloves, suppying gum boot, suppying of combinationplyer and tester and screw driver and wire cutter set, supplying flooer ruuber mat rm 002 8.0 mm, supplyingled panel light 600mm into 600mm, supplying anderecting rectangular shaped led panel light 1200mm into300mm, supplying led concealed type foot or step light, supplying gi strip of high purity required size, led tubelight retrofit type q2, led batten q2

Central Government/Public Sector

TRN :35387672 | 23 Sep, 2025

Tender Value : 0

Hisar - Haryana

Tender for gem bids for procurement, lv2 icvs 2450720465915 or 2540001847 765 12 sb224shock absorber lv2 icvs 4720720409046 765 07 13hose lv2 icvs 4720720260274 765 07 24 hose lv2icvs 5330014856 700 40 258 gasket lv2icvs 5330014060 748 25 338 gasket lv2 icvs 5330018774 kb 05100 gasket lv2 icvs 4720001223 765 05 726 hose nonmetalic lv2 icvs 5330127001572 765 05 172 gasket lv2 icvs 4330000192 675 05 sb154 strainer assyfilter lv2 icvs 765-05-369 or 369k canvas cover lv2 icvs 5330720115189 kb 05 98 gasket lv2 icvs5330014024 700 40 260 06 gasket lv2 icvs5330009126 765 06 311 gasket special lv2 icvs5330021953 765 06 394 felt mechanical performed lv2 icvs 5330380692 765 06 842k sealing ring lv2icvs 5330395594 730 04 225 gasket lv2 icvs5330019129 765 06 135 gasket lv2 icvs 765-08-928 or765 08 928k ringgasket lv2 icvs 5330720113847 76510 1009 gasket lv2 icvs 5330009176 765 10 1380gasket lv2 icvs 5330020518 765 10 1435 gasket lv2icvs 5331720324411 765 12 801 ring lv2 icvs5340720270534 765 17 28 boot lv2 icvs5340720270538 765 17 46 boot lv2 icvs 534013744765 31 13 ring sealing torodial lv2 icvs 5315008293 765 32 93 lock pin lv2 icvs 5315 008295 76533 7 pin lock lv2 icvs 530 024921 700 40 123 gasket lv2 icvs 5330 021358 765 33 6 ring sealing torodial lv2 icvs 5335000891 701 212 619 packing performed lv2 icvs 5340013718 765 33 40 ring sealing torodial lv2 icvs 5330397585 cqa icv set 025 cup and springset lv2 icvs 5330397587 cqa icv set 027 cup andspring set lv2 icvs 5330720115461 765 38 242 gasket lv2 icvs 5330 383897 54 09 058 packing ringperformed z22 5340178656 675 42 sb129 belt z22 bid number gem2025b6679990 dated 13-09-2025 0 0 bid document1 93 0 0 2 2 ged 675 42 70 cap, z22 5330381465 675 42 77 gasket, lv2 icvs 5330394338 765 50 1898 gasket, lv2 icvs3030 720153540 765 50 sb951 belt, lv2 icvs5330020293 765 50 878 gasket, lv2 icvs5340720368156 765 50 1552 buffer, lv2 icvs5340010824 765 50 1553 buffer, lv2 icvs 5330022538730 50 366 gasket, lv2 icvs 5331720323819 775 22 38ring, lv2 icvs 5340179886 765 50 sb599 hose, lv2icvs 5340179885 765 50 sb600 hose, lv2 icvs5340015314 765 51 46 bumper, n1 675 51 335 cover, n1 675 51 sb124 cover assy, v5 rus 675 53 sb147hose, v5 rus 775 36 25 ring, lv2 icvs 5330014023 70040 260 05 gasket, lv2 icvs 5330014026 700 40 260 08gasket, z7 rus 765 56 92 gasket, z7 rus 765 56 93gasket, z7 rus 765 56 105 gasket, v5 rus 765 66 204ring, v5 rus 765 66 226 packing, v5 rus 765 66 sb106cleaner, v5 rus 765 66 193 gasket, lv2icvs 5330720117066 765 69 66 packing, k9 bmp nbc 765 71 341end piece, k9 bmp nbc 675 71 285 gasket, lv2icvs5330 025020 765 50 2600 gasket, k9 bmp nbc 675 71307 gasket, k9 bmp nbc 4720016672 675 71 342 hose, lv2 icvs 5330335544 765 50 2601 seal rubber strip, lv2 icvs 5330400001910 675 50 380 nbc cover gasket, lv2 icvs 5335000888 765 50 2008 packing performed, lv2 icvs 5330015648 765 50 1410 gasket, lv2 icvs5330 127001631 765 46 247 gasket, lv2 icvs5330020080 765 46 228 gasket special, lv2 icvs2530720255433 765 17 363 rubber boot, lv2 icvs5330396570 765 17 368 gasket, lv2 icvs5330610120936 765 17 427 gasket, z22 675 73 381packing, lv2icvs 5330019825 765 82 193 gasket, z7765 56 105 gasket, k9 bmp nbc 765 71 1463 gasket, k9 bmp nbc 765 71 1462 gasket, n1 675 51 sb 126mantle cover, k9 bmp nbc 765 71 362 spacer, lv2icvs 5330031409 765 50 752 gasket, n1 675 51 95packing, n1 675 51 95 01 packing, z1 misc 675 86 23gasket, k9 bmp nbc 675 71 225 gasket, k9 bmp nbc675 71 224 gasket, lv2icvs 3120100011 765 17 619bushing sleeve, lv2 icvs 2590001625 765 58 216casing flexible shaft assy, lv2 icvs 5330023914 67558 132 packing, lv2 icvs 765 78 sb724 hose, lv2 icvs4720002283 765 78 717 hose non metalic, lv6 mt6v1180 vnschkhl gost 1284 1 80 1284 3 80 drive belt, z6 misc 730 82 219 boot rubber, z6 misc 775 97 11 or54 26 390 2 boot rubber, z6 misc 240 64 47 rubberend piece, z6 misc 775 97 11 boot rubber, lv2 icvs5330017233 765 10 sb 521 packing assy, lv2 icvs5330021648 765 10 385 gasket, lv2 icvs 4720 001668765 10 948 hose, lv2 icvs 5330 023756 765 10 835gasket, x2 misc tu 16 522 001 76 fuse sp 10a 30v, lv2icvs 5330 021388 765 10 1121 gasket, lv2 icvs 5340184794 765 10 922 or 765 10 2390 packing, lv2 icvs4710002908 765 10 1579 branch pipe assy, x2 misc tu16 522 001 76 fuse pv 100as 30v, lv2icvs 3120 100011765 17 619 bushing sleeve, lv2icvs 5330 024301 76578 70k packing performance, lv2icvs 5330 024891765 78 71 k1 packing, x2 misc tu 16 522 001 76 fuse pv10a 30v, x2 misc tu 16 522 001 76 fuse pv 20a 30v, x2misc tu 16 522 001 76 fuse pv 40a 30v, x2 misc tu 16522 001 76 fuse pv 50a 30v, lv2 icvs 5340 184821 76533 sb111 or sb193 bumper, lv2 icvs cqa icv set 023765 31 sb128 cup and spring, k9 bmp nbc 675 71 291gasket, lv2 icvs 765 50 1429 packing rh, lv2 icvs5330 014069 675 58 62 felt mechanical preformed, //bid details2 / 93 lv2icvs 5330 24893 700 40 261 gasket, lv2 icvs4720002835 40u12 1 3 13 hose 12 mm dia x4 mmthickness, lv2 icvs 4720002801 40u22 1 3 13 hose 22mm dia x5 mm thickness, lv2 icvs 40u32 0 7 7 hose 32mm dia x6 2 mm thick, lv2 icvs 5330 026463 765 101648 gasket, lv2 icvs 4720 001238 765 05 sb 311 hoseassy rubber, lv2 icvs 4720 001238 765 05 sb 312 hoseassy rubber, lv2icvs 4720 003828 765 82 sb394 hoseassy, lv2icvs 5330 020224 765 46 352 gasket special, v5 au.8.683.013 gasket, v5 au.634.173 gasket, v5 76510 1170 gasket, lv2icvs 765 50 2596 gasket, lv2icvs765 50 2597 gasket, lv2icvs 765 78 1169 ring packing, lv2icvs 765 33 54 ring sealing torodial, lv6 mt73310 000144 bearing ball single row 65x140x33 mm, lv2icvs 765 49 55 frame, lv2icvs 765 50 2582 gasket, z7 rus tv16.535.913 74 lamp 27 110, z7 rus gost 220480 lamp 26, z7 rus ty 28 4.8 ty lamp cm28 4.8lv2 icvs 2450720465915 or 2540001847 765 12 sb224shock absorber, lv2 icvs 4720720409046 765 07 13hose, lv2 icvs 4720720260274 765 07 24 hose, lv2icvs 5330014856 700 40 258 gasket, lv2icvs 5330014060 748 25 338 gasket, lv2 icvs 5330018774 kb 05100 gasket, lv2 icvs 4720001223 765 05 726 hose nonmetalic, lv2 icvs 5330127001572 765 05 172 gasket, lv2 icvs 4330000192 675 05 sb154 strainer assyfilter, lv2 icvs 765-05-369 or 369k canvas cover, lv2icvs 5330720115189 kb 05 98 gasket, lv2 icvs5330014024 700 40 260 06 gasket, lv2 icvs 5330009126765 06 311 gasket special, lv2 icvs 5330021953 765 06394 felt mechanical performed, lv2 icvs 5330380692765 06 842k sealing ring, lv2 icvs 5330395594 730 04225 gasket, lv2 icvs 5330019129 765 06 135 gasket, lv2 icvs 765-08-928 or 765 08 928k ring, gasket, lv2icvs 5330720113847 765 10 1009 gasket, lv2 icvs5330009176 765 10 1380 gasket, lv2 icvs 5330020518765 10 1435 gasket, lv2 icvs 5331720324411 765 12801 ring, lv2 icvs 5340720270534 765 17 28 boot, lv2icvs 5340720270538 765 17 46 boot, lv2 icvs534013744 765 31 13 ring sealing torodial, lv2 icvs5315 008293 765 32 93 lock pin, lv2 icvs 5330014024700 40 260 06 gasket, lv2 icvs 5315 008295 765 33 7pin lock, lv2 icvs 530 024921 700 40 123 gasket, lv2icvs 5330 021358 765 33 6 ring sealing torodial, lv2icvs 5335000891 701 212 619 packing performed, lv2icvs 5340013718 765 33 40 ring sealing torodial, lv2icvs 5330397585 cqa icv set 025 cup and spring set, lv2 icvs 5330397587 cqa icv set 027 cup and springset, lv2 icvs 5330720115461 765 38 242 gasket, lv2icvs 5330 383897 54 09 058 packing ring performed, z22 5340178656 675 42 sb129 belt, z22 ged 675 42 70cap, z22 5330381465 675 42 77 gasket, lv2 icvs5330394338 765 50 1898 gasket, lv2 icvs 3030720153540 765 50 sb951 belt, lv2 icvs 5330020293 76550 878 gasket, lv2 icvs 5340720368156 765 50 1552buffer, lv2 icvs 5340010824 765 50 1553 buffer, lv2icvs 5330395594 730 04 225 gasket, lv2 icvs5330022538 730 50 366 gasket, lv2 icvs5331720323819 775 22 38 ring, lv2 icvs 5340179886765 50 sb599 hose, lv2 icvs 5340179885 765 50 sb600hose, lv2 icvs 5340015314 765 51 46 bumper, n1 675 51335 cover, n1 675 51 sb124 cover assy, v5 rus 675 53sb147 hose, v5 rus 775 36 25 ring, lv2 icvs5330014023 700 40 260 05 gasket, lv2 icvs 5330014026700 40 260 08 gasket, z7 rus 765 56 92 gasket, z7 rus765 56 93 gasket, z7 rus 765 56 105 gasket, v5 rus //bid details3 / 93

Central Government / Public Sector

TRN :35389833 | 30 Sep, 2025

Tender Value : 9.59 Lacs

Thiruvallur - Tamil Nadu

Tender for gem bids for pathology, bid number gem2025b6530290 dated 15-09-2025 bid document1 58 1 1 glucose, 1000ml test pack, deionised water, 5 lit, muller hinton agar, 100gm, nutrient agar, 100gm, mac conkey agar, 100gm, simmion citrate agar, 100gm, triple sugar iron agar, 100gm, robertsonscooked meat medium, 500gm, kovacs strips, 25s, bhiwith sps lq 004a 70ml, 10s, bhi with sps lq 004 20ml, 10s, manittol salt agar, 100gm, oxidase disc 50s, petridishes 90 x 15mm disp 500s, uricol containerssterile 100s, urine containers nonsterile pw045, optochin disc dd009, bacitracin 100s, antibioticdisc 100s, ph paper indicator strip, 10s, peptonerm667, 500gm, carbol fuchsin stain, 125ml, saffranin stain, 125ml, loeflers methylene bluestain, 125ml, self adhesive autoclave tape 12mm, hicare, 500ml, ppd tuberculin i p 5tu per 0.1 ml, 5ml, anti shyphilis igg and igm, 25 test, hiv i and hiv ii withp24 antigen and ab, 50 test, hepatitis b surfaceantigen, 25 test, anti salmonella typhi igg and ig m, 25 test, dengu igg and ig m with ns1 antigen, hrp2 andpldh malaria antigen, 40 test, anti hcv, 30 test, antileptospira, 10 test, eryscreen a, b, d 5ml, groupingsera, anti ab 10ml, coombs serum, 5ml, bovinealbumin, 5ml, acetone sq, 2.5 litre, coverslipsquare 22 x 22mm, 200gm, filter paper 125mm, 50spack, drabkins reagent, 1000ml bottle, microslides50 slide packet, esr vials, 100s pack, leishman stain500ml, sodium hypochlorite, 5 litre can, syringedisposable 1ml, with 26g x half inch needle, bandaidsround, esr tubes, flash back needle 21g x 1 inch, 1000s, fluoride tubes 4.0 ml, 1000s, edta tubes2.0ml, 1000s, silica clot activators tube, 1000s, medipoint lancets, 200s, tissue paper, microcapillary tubes, 100s, finn tips yellow, 1000s, finntips blue, 1000s, haemospot 50 test pack, multistix10 sg urine strips, 100s, fouchets reagent, 125ml, urine strips alb, sugar bistrips 100s, ehrlicsreagent, 125ml, boric acid, 500gm bottle, borosiltubes 18 x 150mm, 100s, borosil tubes 12 x 100mm, 100s, brilliant cresyl blue stain, rubber teats tohold 10ml glass pipette, ria vials, 500s, rotheraxmixture for urine kb, 500gm, liquid detergentmultidet, 1000ml, microscope lamp, metal loop ss4la 014, metal loop ss 2 la 650, sterile cotton swabpw009, sterile cotton swab with wooden stick, grouping sera anti d igg and igm blend //bid details2 / 58

Central Government And Public Sector

TRN :35373773 | 23 Sep, 2025

Tender Value : 0

Malda - West Bengal

Tender for supply of bow assembly complete pan with metallised carbon strip.

Related Searched Keywords : metal strip

List of metal-strip Tenders

Tender for gem bids for n1/5340-167733 strip retaining metallic

Tender for supply of metalized carbon strips suitable for high reach pantographs with auto dropping device add provision as per rdso specification no. rdso.2014/el/spec/0114, rev.0, dt. may 2014..

Tender for supply of bow assembly complete pan with metallised carbon strip.

Get metal strip Tender Alert...

Related Searched Keywords : metal strip

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us