Filters

List of mcb scrap Tenders

List of latest mcb scrap Tenders in Indian Tenders. Click on any mcb scrap Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for mcb scrap Tenders.

All-Tenders (20)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

corporations/Associations/Others

TRN :35806218 | 17 Nov, 2025

Tender Value : 0

Rajahmundri - Andhra Pradesh

Tender for gem bids for dc o or p voltmeter, dc o or p ammeter, ac i or pvoltmeter, ac i or p ammeter, psp voltmeter, control card 103a, control card 104c1, controlcard 105d1, control card 106zn, control card 107, o or p contactor tru, psp transducer tru, gpsantenna tru, gps timer tru, sply of permanent refcell, surge diverter, o or p voltage transducertru, o or p current transducer tru, fuse linkns10a, toggle switch 2 pole 2 way, display board for ksdb01, mother board for ks mb01, aux transformer, control card 118b, control card 118c, lightningarrestor, rb1 bleeder resistor, filter controlcircuit sply, filter capacitor, diode 70 hmr 150 or120, diode 150 lf 120, cu cuso4 half cell, refvoltmeter selector switch 8 way, mains onindicator 22 5 dia with washers, ref fail settingcard, scr tail type, ref electrode selector switch4 way, dc output voltmeter cppsm, dc inputammeter cppsm, dc input voltmeter cppsm, dcoutput ammeter cppsm, psp voltmeter cppsm, control card ceco104c1 cppsm, control cardceco106 cppsm, control card ceco107 cppsm, control card ceco103b cppsm, control cardceco30r cppsm, control card ceco31r cppsm ortru, o or p contactor cppsm, gps antenna cppsm, gps timer cppsm, psp transducer cppsm, voltagetransducer cppsm, current transducer cppsm, display board for cppsm, mother board for cppsm, ref fail setting card cppsm, ammeter w or extshunt, rb1 bleeder resistor cppsm, transistorevl31 050, 32a small fuse holder, glass fuse cppsm ortru, variable resistor ajb, shunt 50mv 5 a, shunt50mv 10 a, shunt 75mv 75 a, galvanic isolator 230vac or 48v dc

Central Government/Public Sector

TRN :35808989 | 03 Dec, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for supply, installation, testing & commissioning of control transformer, 200va, 750/415v, type -ii, 50 hz, single phase, "h" class insulation, dry type & air cooled along with fuses (duly fitted with 2a, 1.2 kv fuse link with fuse base for primary approved make and duly fitted with 2a, 500v fuse link with fuse bas e for secondary approved make) as per rdso specification no. rdso/pe/spec/ac/0203-2020 (rev.0) & rd so letter no. el/7.1.108/main file dt. 16.04.2021

Central Government/Public Sector

TRN :35810471 | 10 Nov, 2025

Tender Value : 0

Jhansi - Uttar Pradesh

Tender for supply of hrc fuse link, 25 amp, 415v to 690v, breaking capacity 80 ka,fixing method-off set stagge red, size f1

Central Government/Public Sector

TRN :35811417 | 27 Nov, 2025

Tender Value : 0

Visakhapatnam - Andhra Pradesh

Tender for gem bids for control circuit transformer -415v/240v/150va hotplate 3kw,415v with element water boiler 3 kw / 415v / 3 ph / 3 wire 50 hz mcb 6 a. heating element 6.5 kw oven control switch 2 pole 16a 250v,10a 440v on off switch water boiler 90l 9kw/415v/3ph/3wire/50hz ac for yard 1171&72 heating element 3kw 230v for deep fat frayer make spherhot 10 kw cooking range for wj facs load fuse link 20a/ 415v cat. ns/20 g.e. make geyser 25 l

Central Government And Public Sector

TRN :35798248 | 10 Nov, 2025

Tender Value : 0

Bongaigaon - Assam

Tender for supply of hrc fuse link din type blade contact, size 000, current rating: 40 amps, voltage:690 v ac, breaking capacity=80 ka conforming to is 13703 : part 2 : sec 2 : 1993. as per drg.no. nil specn: is 13703 : part 2 : sec 2 : 1993

Central Government/Public Sector

TRN :35790498 | 14 Nov, 2025

Tender Value : 0

Jhansi - Uttar Pradesh

Tender for gem bids for starting, x2 misc-6212-4055-03 starting rope, x2 nd-6140-000321 lead secondary btry negative 4yda-53061, x2 nd-9130-000014 lv6-mt1 capsules, x3 nd-ixc-gc-3-3240-19 nut hex m8 x 1 25mm, x3 nd-ixc-gl-500-4601-02 joint 0.3 m thick pto side 156mm x220mm, x2 5920-001065 fuse link electrical glass cartridge 1a, x3rp-ixc-gl-6212-4055-03 rope starting nylon withhandle size, x3 nd-ixc-kr-34-032-020-00 element micopre filter fuel

Central Government/Public Sector

TRN :35760455 | 13 Nov, 2025

Tender Value : 4.77 Lacs

Mumbai - Maharashtra

Tender for gem bids for digital voltmeter , digital ammeter , mcb 10a dc 2p , mcb 16a dc 2p , mcb 20a dc 2p , contractor 415v 25a , auxiliary contractor 2no 2nc 230v , push button 1no 1nc red , hrc fuse 2a , push button 1 no 1 nc green , hrc fuse , heater plate assy complete 12 kw 415v , pressure release safety valve , over load relay , hrc fuse link 4a

Central Government/Public Sector

TRN :35747673 | 11 Nov, 2025

Tender Value : 0

Lucknow - Uttar Pradesh

Tender for supply of 25 kv do fuse link, 1amp as per rdso specs no eti/psi/141/86 rev 1 apr-87 or latest..

Central Government/Public Sector

TRN :35737421 | 17 Nov, 2025

Tender Value : 0

Bhusawal - Maharashtra

Tender for supply of 2 amp hrc fuse link 500vac, 120ka, capac 2 amp hrc fuse link 500vac, 120ka, capacity with 160 amp. fuse base dmc, as per clw specn no.-clw/es/f-8, clw drg no.-clw/es/sk-1/f-8, confirming to is-13703 part-ii & iec-269-2. for 3 phase loco..

Related Searched Keywords : mcb scrap

List of mcb scrap Tenders

Tender for supply of hrc fuse link, 25 amp, 415v to 690v, breaking capacity 80 ka,fixing method-off set stagge red, size f1

Tender for supply of hrc fuse link din type blade contact, size 000, current rating: 40 amps, voltage:690 v ac, breaking capacity=80 ka conforming to is 13703 : part 2 : sec 2 : 1993. as per drg.no. nil specn: is 13703 : part 2 : sec 2 : 1993

Tender for supply of 25 kv do fuse link, 1amp as per rdso specs no eti/psi/141/86 rev 1 apr-87 or latest..

Tender for supply of 2 amp hrc fuse link 500vac, 120ka, capac 2 amp hrc fuse link 500vac, 120ka, capacity with 160 amp. fuse base dmc, as per clw specn no.-clw/es/f-8, clw drg no.-clw/es/sk-1/f-8, confirming to is-13703 part-ii & iec-269-2. for 3 phase loco..

Get mcb scrap Tender Alert...

Related Searched Keywords : mcb scrap

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us