Filters

List of masonry-works Tenders

List of latest masonry-works Tenders in Indian Tenders. Click on any masonry-works Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for masonry-works Tenders.

All-Tenders (16)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Local Bodies

TRN :49020013 | 13 May, 2025

Tender Value : 19.19 Lacs

Pallippad - Kerala

Tender for supply of materials for the works included in the mahatma gandhi national rural employment guarantee scheme in pallippad gramapanchayat. , coarse sand (zone iii) , portland cement , quarry waste , royalty for good earth , stone for masonry work , stone aggregate(single size): 10 mm nominal size , stone aggregate(single size): 40 mm nominal size , stone aggregate(single size):20 mm nominal size

State Government

TRN :49020123 | 12 May, 2025

Tender Value : 11.90 Lacs

Sirohi - Rajasthan

Tender for tender for various civil works for garden at government collage, sheoganj- 1 construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300-1 and 300-2 with a lead upto 50 m as per morth specification clause 305.3 2 surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead up to 50 mtr. and lift up to 1.5 mtr. : all kinds of soil 3 providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 40mm nominal size). 4 providing and laying 80 mm thick cement concrete blocks of m-40 grade (manufactured with fully mechanised dry cast process with forced action mixer whose arms revolve along the main axis and rotate about its own axis also, having humidity sensor for moisture control of w/c ratio in concrete mix. manufactured with steel moulds(milled and manufactured in csi diamond or csi nitro process for accuracy) on steel base plate of min 16 mm thick;having vibration and pressing action both together withthe help ofmultiple synchronised vibrators.power of hydraulic station should be minimum 50kw for compaction and cured in controlled chambers having humidity control and automated air circulation system) spreading 25mm thick sand underneath and filling joints with sand on existing w.b.m.base, as per is15658:2006 and all mat 5 providing and laying in position specified grade ofcement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcementfor walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix 6 kota stone slab flooring 25 mm thick over 20 mm (average) thickbase laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completewith base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 7 earth work in excavation by mechanical means (hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal ofexcavated earth, lead upto 50m andlift upto 1.5 m , disposed earth to be levelled and neatly dressed : all kinds of soil 8 random rubble stone masonry with hard stone in superstructure aboveplinth level and upto five levelabove 30cm. thick walls in : cement mortar 1:6 ( 1-cement : 6-sand). 9 plaster on new surface on wall in cement sand mortar 1:3 including racking of joints etc. complete fine finish : 25 mm thick 10 providing and applying white cement based puttyover plastered surface to prepare the surface even and smooth completenew plastered surface (three or more coats) 11 painting with synthetic enamel paint of approved brand and manufacture togive an even shade :two or more coats on new work 12 providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide 13 finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). 14 providing and fixing granite stone slab mirror polished and machine edge cut in walls, pillars, steps, shelves, sills counters, floors etc. laid on 12mm (av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.

Local Bodies

TRN :49020218 | 12 May, 2025

Tender Value : 0

Alwar - Rajasthan

Tender for tender for construction material supply works gp jajor - 1 cement2 ppc bag3 fine aggregate4 sand/gravel5 stone 40mm grit (broken by crusher) (cut voids 1/11)6 stone 20mm grit (broken by crusher)7 road work material (including 5 km lead)8 gravel (cut voids 1/6)9 brick (22.5x7.50 cm)10 i st class11 soling/kharanja/masonry stone12 masonry beradda (rr)13 kharanja soling (for flooring work upto 15cm height)14 stone chips (flaky material) (3-4 thick & length and width 1-2)15 sandstone (dpc,sill,coping,lintel,tand,almirha,etc)16 upto 50-75mm thickness17 flooring/strip patan katla stone18 patta katla for patan 60-75mm thickness, min. 3 sqft or more area19 polished kota stone (one side polished)20 upto 900 sq. cm21 stone slabs22 up to 1.5 m length, minimum 40mm thick23 precast tiles / blocks24 glazed size-30x45 cm25 cement interlocking block m-30grade, 80mm thick26 structural steel27 iron (tor steel fe 415/500 for reinforcement)28 iron girders29 conical iron/square rebar/leaf/angle iron30 mesh31 iron mesh (24 gauge, 14 mesh)32 colour paint33 enamel paint34 lime - for painting (aaras / kali)35 plain sheet (plain sheet)36 g.i.sheet 22 gauge (0.80mm )

Local Bodies

TRN :49020231 | 12 May, 2025

Tender Value : 0

Alwar - Rajasthan

Tender for tender for construction material supply works gp chikani - 1 cement2 ppc bag3 fine aggregate4 sand/gravel5 stone 40mm grit (broken by crusher) (cut voids 1/11)6 stone 20mm grit (broken by crusher)7 road work material (including 5 km lead)8 gravel (cut voids 1/6)9 brick (22.5x7.50 cm)10 i st class11 soling/kharanja/masonry stone12 masonry beradda (rr)13 kharanja soling (for flooring work upto 15cm height)14 stone chips (flaky material) (3-4 thick & length and width 1-2)15 sandstone (dpc,sill,coping,lintel,tand,almirha,etc)16 upto 50-75mm thickness17 flooring/strip patan katla stone18 patta katla for patan 60-75mm thickness, min. 3 sqft or more area19 polished kota stone (one side polished)20 upto 900 sq. cm21 stone slabs22 up to 1.5 m length, minimum 40mm thick23 precast tiles / blocks24 glazed size-30x45 cm25 cement interlocking block m-30grade, 80mm thick26 structural steel27 iron (tor steel fe 415/500 for reinforcement)28 iron girders29 conical iron/square rebar/leaf/angle iron30 mesh31 iron mesh (24 gauge, 14 mesh)32 colour paint33 enamel paint34 lime - for painting (aaras / kali)35 plain sheet (plain sheet)36 g.i.sheet 22 gauge (0.80mm )

State Government

TRN :49020265 | 13 May, 2025

Tender Value : 17.34 Lacs

Delhi - Delhi

Tender for e.i.u.s. (revenue) providing and laying cc pavement over existing deteriorated cc pavements and raising of drains in jj cluster a - block, jahangirpuri (pid-16722).- 1 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge.nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 2 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge.nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 3 demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. in cement mortar 4 desilting of nallah / drain in running flow and under foul condition for depth not exceeding 1.50 metre . including removal of stones , brickbats, garbage, silt mud, polythene , sewage if any etc. and diversion of flow of sludge if required and removing the same away from cluster at the place as directrd by engineer-in-charge. disposed silt to be levelled and neatly dressed. 5 earth work in excavation by mechanicalmeans (hydraulic excavator)/manual means in foundation trenches or drains (not on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil a directed, within a lead of 50 m. all kinds of soil. 6 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size). 7 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-iii): 10 graded stone aggregate 40 mm nominal size). 8 providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of r.m.c. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per is : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the engineer-in-charge.” note : excess/less cement used than specified in this item is payable/ recoverable separately all works upto plinth level : m-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 9 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:4(1 cement : 4 coarse sand) 10 half brick masonry with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand) 11 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) 12 neat cement punning. 13 providing and fixing factory made precast rcc perforated drain covers, having concrete of strength not less than m-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional t.m.t. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with m.s. flats of size 50 mm x 1.6 mm complete, all as per direction of engineerin- charge. 14 providing and fixing non a.c. multipurpose fiber cement board strips in joints of cement concrete pavements. 50mm+- 5mm wide and 6mm thick having normal length not less than 90cm. 15 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:5:10 (1 cement : 5 coarse sand (zone-iii): 10 graded stone aggregate 40mm nominal) manufactured sand derived from recycled concrete aggregate (rca): 10 graded stone aggregate 40 mm nominal size). 16 providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. all work upto plinth level. 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including manufacture sand derived from recycled concrete aggregate (rca) upto 25% 4 graded stone aggregate 20mm nominal size including recycled concrete aggregate (rca) upto 25% 17 providing and laying dry brick aggregate 40mm nominal size in foundation and plinth or under floors at all level including spreading and ramming in layers as directed by engineer-in-charge 18 suply of earth and banking the same in layer not exceeding 20 cm indepth braking clods watering rollieach layr with 182 tonne roller of wooden or steel rammer including dressing up in embankment for rods, foloods banks, guide banks or filling of ground depressions with all lead and lift etc. complete. 19 add for cost index @35.22 %as per order by gnctd. except item no.15 and 16 (i.e. on 3987.30+6608.75 = rs.10596.05) 20 deduct 9.50% as per gnctd

Local Bodies

TRN :49020276 | 12 May, 2025

Tender Value : 0

Alwar - Rajasthan

Tender for tender for construction material supply works gp karoli - 1 cement2 ppc bag3 fine aggregate4 sand/gravel5 stone 40mm grit (broken by crusher) (cut voids 1/11)6 stone 20mm grit (broken by crusher)7 road work material (including 5 km lead)8 gravel (cut voids 1/6)9 brick (22.5x7.50 cm)10 i st class11 soling/kharanja/masonry stone12 masonry beradda (rr)13 kharanja soling (for flooring work upto 15cm height)14 stone chips (flaky material) (3-4 thick & length and width 1-2)15 sandstone (dpc,sill,coping,lintel,tand,almirha,etc)16 upto 50-75mm thickness17 flooring/strip patan katla stone18 patta katla for patan 60-75mm thickness, min. 3 sqft or more area19 polished kota stone (one side polished)20 upto 900 sq. cm21 stone slabs22 up to 1.5 m length, minimum 40mm thick23 precast tiles / blocks24 glazed size-30x45 cm25 cement interlocking block m-30grade, 80mm thick26 structural steel27 iron (tor steel fe 415/500 for reinforcement)28 iron girders29 conical iron/square rebar/leaf/angle iron30 mesh31 iron mesh (24 gauge, 14 mesh)32 colour paint33 enamel paint34 lime - for painting (aaras / kali)35 plain sheet (plain sheet)36 g.i.sheet 22 gauge (0.80mm )

State Government

TRN :49020344 | 15 May, 2025

Tender Value : 2.55 Crore

Shahbad - Delhi

Tender for e.i.u.s. (revenue) providing and laying cc pavement and drains in deteriorated lanes at jj cluster adjacent to a-block, shahbad daulatpur (in situ upgradation scheme) (pid-16309).- 1 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 2 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone -iii) including manufactored sand derived from recycled concrete aggregate (rca) upto 25%: 4 graded stone aggregate 20 mm nominal size including recycled concrete aggregate(ra) upto 25%. 3 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate40 mm nominal size) 4 providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of r.m.c. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per is : 9103 to accelerate/retard setting of concrete, improve workability without impairing strength and durability as per direction of the engineer-in-charge.”all works upto plinth level :m-15 grade plain cement concrete (cement content considered @ 240 kg/cum) 5 providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 6 centering and shuttering including strutting, propping etc. and removal of form for :foundations, footings, bases of columns, etc. for mass concrete 7 steel reinforcement for r.c.c. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.thermo-mechanically treated bars 8 brick work with common burnt clay f.p.s. (non modular) bricks of classdesignation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) 9 half brick masonry with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand) 10 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) 11 neat cement punning. 12 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in- charge.nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 13 demolishing r.c.c. work manually/ by mechanical means includingstacking of steel bars and disposal of unserviceable material within 50metres lead as per direction of engineer - in- charge. 14 demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. in cement mortar 15 providing and placing in position 100mm thick factory made machine batched & machine mixed precast rcc rectangular covers on drains of footpath of various sizes,of m-25 grade cement concrete for rcc work, including cost of centering, shuttering, reinforcement of 8mm dia tmt bars of fe500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100mm wide ms sheet duly painted over priming coat , reinforcement to be welded at edges with ms sheet and providing 2 nos. 12 mm dia bar for hooks etc i/c cost of cartage ,all leads & lift, handling at site etc. all complete as per direction of engineer-in-charge. 16 providing and fixing in position pre-cast r.c.c. manhole cover and frame of required shape and approved quality 19.19.1 l d- 2.5 circular shape 560 mm internal diameter 17 providing and laying dry brick aggregate 40mm nomial size in foundation and plinth or under floors at all level including spreading ramming in layers as directed by engineer-in-charge. 18 supply of earth and banking the same in layers not exceeding 20 cm in depth breaking clods watering, rolling each layer with 1/2 tonne rolller or wooden or steel rammer and dressing up in embankment for roads, flood banks and filling of ground depression with all leads lifts etc. complete 19 supply of malba/building rubbish and banking the same in layers not exceeding 20cm in depth including breaking clodes, watering, rolling each deposited layers with half tonne roller or wooden or steel rammer and dressing up in embankement for roads, flood banks, guide banks or filling of ground dpression with all leads lifts complete. 20 p/f non asbests multipurpose fibre cement board strip in joints of cement concrete pavement, 50mm+-5mm vide and 6mm thick having normal length not less than 90cm. 21 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:5:10 (1 cement : 5 manufactored sand derived from recycled concrete aggregate (rca): 10 graded stone aggregate 40 mm nominal size recycled aggregate(ra)). 22 add for cost index @31.27 %as per order by gnctd (except item no. 3 & 5) 23 deduct 9.50% as per gnctd

State Government

TRN :49022007 | 16 May, 2025

Tender Value : 1.26 Crore

Ambikapur - Chhattisgarh

Tender for (2nd call) construction, testing and commissioning of r.c.c. elevated service reservoir of 01 nos 40kl 12m staging and remaining 100% work 01 nos oht 75%remaining work 01 nos 50kl 12m staging and remaining 65 % work g including providing and fixing of ci double flange pipe, double flange specials di double flange soft seated sluice valve including construction of suitable r.c.c. valve chamber. and gi steel structure of 1 nos 10k.l. 12m staging and 5 nos have remaining work.providing, laying, jointing, interconnection, testing and commissioning of 63 mm dia to 90 mm hdpe pe-100 , pn-6 pipe 90 mm dia to 110 mm dia upvc class 6/10 kg/sqcm with suitable joints 50mm to 100 mm dia gi pipe, valve specials and all fittings including all allied civil works, supplying installation of energy efficiant five star bee rating isi marked required capacity single and three phase, 50 hz, 220v, deep well submersible pump stainless steel body, suitable for 4/6 tube well with control panel starter suitable for submersible pump with dry run protection, connections, including clamps, bore cap etc. as required as per specifications but excluding pipe, ss/nylon wire rope and connection cable including verification of tubewell yield electric connection from cseb, construction of rcc structure brick masonry 04 nos- brick masonry switch room of size 1.501.502.50 mtr and 01 nos switch room of size21.502.503.00 mtr construction of boundry wall near oht providing 172 functional household tap connection(f.h.t.c) in individual households, etc. complete with trial run operation maintanance for 06 months under piped water supply scheme under jal jeevan mission for village-sahanpur, block- sitapur.district – surguja (c.g.). total length- 1327 meter

State Government

TRN :49023607 | 16 May, 2025

Tender Value : 22.62 Lacs

Lucknow - Uttar Pradesh

Tender for tender for construction and renovation work of community center located in sector-d of kanpur road scheme - rcc repairs 2 chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of engineer-in-charge. 3 75mm average thickness 4 50mm average thickness 5 25 mm average thickness 6 cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of engineer-in-charge. 7 bars upto 12 mm diameter 8 bars above 12 mm diameter 9 drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in rcc beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of engineer-in-charge.upto and including 12mm dia. 10 providing, mixing and applying bonding coat of approved adhesive on chipped portion of rcc as per specifications and direction of engineer-in-charge complete in all respect.epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make 11 providing, mixing and applying sbr polymer (of approved make) modified cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of engineer-in-charge.note: measurement and payment: the pre-measurement of thickness shall be done just after the surface preparation is completed and payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 n/sqmm2). 12 25 mm average thickness in 2 layers. 13 50 mm average thickness in 3 layers. 14 providing and laying sbr polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concrete jacket for the structuralmembers e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness all-round existing core of rcc member.note: rates shall be for finished surface area of concrete and shall include the cost of making holes in existing rcc slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved super-plasticiser forrendering concrete as flowable self compacting and sbr polymer but shall exclude cost of reinforcement, bond coat, shear keys, centering and shuttering, strutting, propping etc (payment under this item shall be madeonly after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument) 15 50mm thick in grade m 25 with cement content not less than 330 kg per cum 16 75mm thick in grade m 25 with cement content not less than 330 kg per cum 17 100mm thick in grade m 25 with cement content not less than 330 kg per cum 18 providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of engineer-in-charge.(the payment shall be made on the basis of actual weight of approved grout injected.) 19 epoxy injection grout in concrete/rcc work of approved make 20 providing, erecting, maintaining and removing temporary protective screens made out of specified fabric with all necessary fixing arrangement to ensure that it remains in position for the work duration as required by the engineerin- charge.wooven pvc cloth 21 shotcreting r.c.c. columns, beams and slabs etc. in layers with approved design mix concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stoneaggregate of 10 mm maximum size in proportion as per design criteria] including the cost of centering and shuttering at edges and corners etc. as directed by engineer- in-chargenote: rates shall include the providing necessary ground wires etc. the levelling gauges, if used, shall be paid for separately. payment under this item shall be made only after proper wet curing has been done and surface hasbeen satisfactorily evaluated by sounding/tapping with a blunt metal instrument. 22 50mm thick in grade m 25 with cement content not less than 330 kg per cum 23 75mm thick in grade m 25 with cement content not less than 330 kg per cum 24 providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20mm to 30mm) up to depth from 30mm to 80mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of engineer-in-charge. 25 providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of l shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by engineer-in-charge. 26 mild steel or iron work in plain work such as in r.c.c. or r.b. (when not included in an over all rates ) including bending for proper completion of the workand including supply of steel and its wastage , bends, hooks and authorised overlaps shall be measured up to floor two level. 27 centering and shuttering including strutting, propping etc. and removal of form for : lintels, beams, plinth beams, girders, bressumers and cantilevers 28 centering and shuttering including strutting, propping etc. and removal of form for : columns, pillars, piers, abutments, posts and struts 29 centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thic 30 waterproofing and terracing 31 providing and laying in situ five course water proofing treatment with app (atactic polypropylene) modified polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to is : 702, 3rd layer of roofing membrane app modified polymeric membrane 2.0 mm thick of 3.00 kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron hmhdpe film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron hmhdpe film. 5th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). 32 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate 33 miscellaneous works 34 providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, includingadditional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of engineer-in-charge.note:- (1) the elevational area of the scaffolding shall be measured for payment purpose. (2) the payment will be made once only for execution of all items for such works. 35 disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge. 36 brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in : cement mortar 1:6 (1 cement : 6 coarse sand) 37 cleaning of under ground sump, over head r.c.c. tank ( independent staging) including disposal of slit and rubbish, all as per direction of engineer-in-charge.the cleaning shall consist following operations:-(i) tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.(ii) entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.(iii) chlorination of rcc internal surface by liquid chlorine.(iv) the treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.(v) finally the surface shall be treated with ultraviolet radiation etc. as per direction of engineer-in-charge. 38 door-window repair 39 renewing glass panes, with putty and nails wherever necessary including racking out the old putty: float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm) 40 renewal of old putty of glass panes (length) 41 demolishing r.c.c. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead asper direction of engineer - in- charge. 42 extra for cutting reinforcement bars manually/ by mechanical means in r.c.c. or r.b. work (payment shall be made on the cross sectional area of r.c.c. or r.b. work) as per direction of engineer-in-charge. 43 demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. in cement mortar 44 dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :of area beyond 3 sq. metres 45 casement door double panel with french (false) mullion with zinc alloy (zamak) 3d hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides.using r4 series with frame (64 mm & above) x (55 mm & above) & sash (64 mm & above ) x (100 mm& above) & french (false ) mullion (64mm & above) x (60 mm & above). (height above 2.5 metre) 46 toughened glass 12 mm thickness 47 finishing work 48 dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 49 20 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) 50 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 51 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete. 52 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: new work (two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 53 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : new work (two or more coats) over and including water thinnable priming coat with cement primer 54 applying priming coat:with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works 55 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :one or more coats on old work 56 washrooms 57 dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.for thickness of tiles 10 mm to 25 mm 58 providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to is : 15622 of approved make in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 59 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including isi marked stainless steel butt hinges with necessary screws 60 providing and fixing aluminium handles, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm 61 providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm 62 providing and fixing aluminium sliding door bolts isi marked anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :

State Government

TRN :49026298 | 15 May, 2025

Tender Value : 50.30 Lacs

Bikaner - Rajasthan

Tender for supply of construction material for mgnrega and all yojana construction works to be done by gram panchayat fy 2025-26; cement ppc gravel stone 40mm grit (broken by crusher) (cut voids 1/11) stone 20mm grit (broken by crusher) stone 12/10/6mm grit (broken by crusher) brick ballast gravel (cut voids 1/6) including transportation 122 km from shobhasar quarry brick (22.5x11x7.50 cm) first class masonry beradda (rr) polished kota stone (one side polished) upto 900 sq. cm polished kota stone (one side polished) 901 to 2300 sq. cm polished kota stone (one side polished) more than 2300 sq. cm stone door frame single paitam size 100x75 mm jodhpur stone strips up to 1.5 m length, minimum 40 mm thick stone strips 1.5 m to 2.40 m length, minimum 50 mm thick stone strips 2.4 m to 3.0 m length, minimum 65 mm thick stone strips above 3.0 m length, minimum 75 mm thick .... more in document

Related Searched Keywords : masonry works

List of masonry-works Tenders

Get masonry works Tender Alert...

Related Searched Keywords : masonry works

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us