Filters

List of magnetic-powder Tenders

List of latest magnetic-powder Tenders in Indian Tenders. Click on any magnetic-powder Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for magnetic-powder Tenders.

All-Tenders (87)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35487116 | 16 Oct, 2025

Tender Value : 79.89 Lacs

Chandigarh Ut - Chandigarh

Tender for gem bids for mechanical, apparatus for verification of law of polygon of forces simply supported beam apparatus inclined plane andfriction slide apparatus winch crab single purchaseapparatus apparatus for determining centre of gravity ofregular irregular lamina bench grinding machine metallurgical microscope heat treatement furnace mufflefurnace spark test apparatus metallurgical cut offmachine standard prepared readymade samplesspecimen with photographs go-no go thread plug gaugem16x15 made of ss go-no go thread plug gaugem22x15 made of ss go-no go snap gauge measuringrange 50-63 mm made of ss go-no go ring gauge dia22mm with tolerance 0 to minus 21 microns made of ss go-no go ring gauge dia 22mm with tolerance 0 to plus21 microns made of ss slip gauges set surfaceroughness tester magnetic v block dial indicator withstand auto collimator with stand angle deckor with set ofangle gauges screw thread micrometer sine bar length125mm made of ss sine bar length 250mm made of ss feeler gauge comparator stand mechanical comparator clinometer gear tooth vernier meteric thread pitchgauge electronic weighing machine digital tachometer digital torsion testing machine pressure measuringbench hydraulic system trainer kit pneumatic systemtrainer kit pelton wheel turbine test rig francis turbinetest rig infrared thermometer digital pyrometer modelsof safety valve blow off cock steam stop valve feed checkvalve economizer demonstration actual cut section modelof two stroke single cylinder petrol engine model of solexcarburettor model of amal carburettor model of watercooling system of an automobile model of lubricationsystem of ic engine mpfi four stroke four cylinderpetrol engine test rig with eddy current dynamometer bid number gem2025b6723232 dated 26-09-2025 bid document1 130 1 1 model of mpfi system, model of crdi system, tool kit, pressure gauge, compound gauge, thermometer withcase, leak dedector to detect cfc hfcs, thermostaticswitch lp-hp cut out overload protector filters strainersand filter driers, refrigeration cycle testing rig, gascharging kit, split ac test rig, actual cut section model ofscrew compressor, actual cut section model of rotarycompressor, vapour absorption refrigeration test rig, vaccum pump, ice plant trainer, sling psychrometer, single plate clutch, multi plate clutch unit, centrifugalcluth unit, cut section of synchromesh gear box, model ofrack and pinion steering gear, model of power steering gearor re-circulating type worm and wheel or other type ofsteering gear, model of ac pump, model of su pump, automobile electric system, brake master cylinder, slidingmesh gear box, cut section model of 4 cylinder 4 strokepetrol engine, diesel fuel supply system, abs systemtrainer, air compressor for tyre inflation, inverter, electricvehicle kit, software, acetylene cylinder, acetylene pipe15 meter, acetylene regulator with spanner, anvil 50 kgwith stand, earthing cable 50mm 06 meter, electrodeholder simple, electrode holder heavy duty, gloves, handhacksaw frame, oxygen regulator with spanner, oxygencylinder, oxygen pipe 15 meter, single snip, weldingscreen, welding torch high pressure, welding torch lowpressure, carpentry bench vice, firmer chisel, gimlet, plough plane 200 mm, spoke shave plane, tenon saw 12inch -300mm, analog meggar, desert cooler, digital earthtester, earth leakage circuit breaker single phase, earthleakage circuit breaker single phase three phase four pole, electric oven, heat convector, motor coil windingmachine, residual current circuit breaker single phase, residual current circuit breaker single phase three phasefour pole, leg vice 4 inch, swage block 4 inch, benchgrinder 0.5 hp motor, bench vice heavy duty, flat filerough 10inch, flat file smooth 10inch, grinder, pipe vice, round die handle, tap wrench 5by16 inch to 1 inch, edgefolding machine, foot shear machine, funnel stake, grinder machine, hand shear 12inch bent snip aviationsnips, hand stake, hearth anvil, round stake, taper stake, gaggers, hand rammer, ladle, lifter- tong 2 in 1, molding boxes flasks, oil fired tilting type furnace, pneumatic rammer, riddle, sand mix muller, drillingmachine, grinding machine heavy duty, planner, powerhacksaw, shaper, welding cable 50mm copperapparatus for verification of law of polygon offorces:apparatus consisting of a wooden board of approx 20mm thickness of size 24x30 inches, fixed on a woodenslotted frame. four adjustable frictionless aluminium pulleysto be provided in the slots of the frame and the frame to beprovided with suitable arrangements for fixing it to a wall., simply supported beam apparatus:apparatus consists oftwo compression dial type spring balance and a woodenbeam of length 1m, minimum cross section 2cmx5cm withall weights and accessories, inclined plane and friction slideapparatus:apparatus consisting of wooden plane ofminimum size 60x15 cms having adjustment for setting theangle precisely. apparatusshould be supplied completelywith frictionless pulley, linear and circular scale, pan, awheeled trolley and a set of minimum six slide drawshaving bottom of metalic and non metalic materials., winch crab single purchase apparatus:apparatus consistingof a heavy duty c.i. wall brackets. the grooved wheel of 25cm dia and a set of gearing arrangements machine cut //bid details2 / 130 gears to be provided for measurement of efficiency ofwinch crab complete set with accessories., apparatus fordetermining centre of gravity of regular & irregularlamina:apparatus consisting of a rod mounted on a basewith a screw at the topand 8 laminas of clear acrylicmaterial- circular, triangular, square, trapezoidal and fourirregular shapes, bench grinding machine:grinding wheel dia300 mm, width 38mm, bore 1, centre height 910 mm, metallurgical microscope :the microscope should havemagnification 50x to 1500x with binocular head inclined at45 . both side coaxial focusing knobs, quadruple revolvingnosepiece with accurate centering and positive click stop, large coaxial mech. stage for x-y movement of specimen, bright field illuminator 6v-20w halogen lamp with fielddiaphragm, filter slot and bulb centering mechanism withred, green and blue filters . objectives : 10x, 45x, 100x, eyepiece : 5x, 10x, 15x paired . the microscope to besupplied with suitable digital camera resolution 10, 20, 50micrometer which can picturize & camera attachments fortaking photos of microstructure . the instrument should bepainted and supplied with dust cover & wooden box withlock and keys ., heat treatement furnace mufflesurface:rectangular design with regulator, mains indicator, 900-1000 c digital thermo electric pyrometer, mainthermal fuse, 3.5 kw . muffle size 12 6 6 with door . thefurnace should be with good insulation., spark testapparatus :suitable for measuring length of spark of metalsand alloys fitted with scale and pointer with heightadjustable vice for holding specimen, complete withgrinding wheel fitted on 1/2 h.p. motor works on 220v, 50hz supply . the apparatus should be nicely painted andfitted on a stand ., metallurgical cut off machine:suitable forcutting upto 30mm dia metal specimen complete with cutoff wheel fitted on 1 h.p. motor and coolant pump andholding vice, works on 220/230v ac supply ., standardprepared readymade samples/specimen withphotographs:set consists of a low carbon steel, bmedium carbon steel, c high carbon steel, d high speedsteel, e hardened and tempered steel, f grey cast iron, g malleable iron, h s.g. iron, i austenitic stainless steel, j case carburized steel, k aluminum alloy, l copperalloy brass, m powder metallurgy sample, n copperalloy bronze, o muntz metal, p electroplatedcomponent, q white cast iron, r pure aluminium, t purecopper, u magnesium alloy, v dead mild steel and xfusion weld steel, go-no go thread plug gauge : m16 x1.5 made of stainless stee, go-no go thread plug gauge:m22*1.5 made of ss, go-no go snap gauge measuringrange 50-63 mm made of ss:measuring range 50-63 mmmade of ss, go-no go ring gauge dia 22mm withtolerance 0 to minus 21 microns made of ss: 22 withtolerance 0 to - 21 microns made of ss, go-no go ringgauge dia 22mm with tolerance 0 to plus 21 microns madeof ss: 22 with tolerance 0 to + 21 microns made of ss, slipgauges set : surface finish below 0.2 of 1 microns, set ofm122 pieces with 87 set made of ss, surface roughnesstester:measuring range: 360 m minimum profileresolution: 0.02 m minimum minimum measuring range:17.5 mm x axis standards: iso, ansi, vda, jis powersupply: battery & ac adapter, magnetic v block : 70lx 100w x 95 h mm made of ss, dial indicator with stand : leastcount 0.01 mm maximum, auto collimator withstand:with standard accessories like plane reflector, opticalsquare instrument, base with leveling attachment, //bid details3 / 130 magnification 10x or above, lc 1sec, measuring range 30mins of arc in x-y axis, angle deckor with set of anglegauges:micro optic and manual operated with maximumworking distance 12m, should consist of microscope, objective lens, two scales engraved on glass screen, opticalsquare of a 1 sec of arc, accuracy 6 sec of arc, resolution0.5 secs of arc or better and set of angles, screw threadmicrometer:stainless steel 0-25mm screw thread pitchmicrometer: with anvils, sine bar : length of sine bar125mm and made of ss to be used for anglemeasurement, sine barlength: 250mm made of ss :length : 250 mm made of ss to be used for anglemeasurement, feeler gauge : 4 long, 26 leaves made ofss, comparator stand:the comparator stand shouldconsists of a very stable flat ground base and an uprightpillar with a mounting bracket for the dial gauge. horizontaldisplacement for the dial gauge should be provided in themounting bracket. base size: 150 x 150 mm pillar dia: 30mm measuring range: 160 mm horizontal displacement: 40mm throat depth: 130 mm, mechanical comparator:magnification range 300-5000 scale estimation of the orderof 0.001 mm, clinometer : minimum dimensions :75 x 50 x15 mm tools for accurately measuring angles andelevations in various applications., gear tooth vernier :measuring range 0-25 mm with l.c 0.001mm used tomeasure the dimensions of gear teeth, meteric thread pitchgauge:pitch range 0.4 mm to 7 mm with 21 leaves made ofss, electronic weighing machine:capacity, 5kg readabilitymin.1 gm, min. pan diameter 100 mm with lcd displaywith battery, digital tachometer : range 0.5 to 19999 rpmor higher, contact type, with lcd display : used for themeasurement of rpm, digital torsion testing machine: maximum torque capacity 100 nm least count 0.01nm torsion speed 1.5 rpm clearance between grips 0-420 mm grips for round specimen 4 mm 8 mm, 8mm 12 mm grips for flat specimen 2-8 mm width forflat specimen 25 mm motor power 0.5 hp powersupply 3 phase 440 volt 50 hz windows 11 os basedsoftware should be capable of real time graphs, pressuremeasuring bench:the setup should be self containedwater recirculating unit consisting of a pipe line withpressure gauge, u- tube differential manometer, singlecolumn manometer and piezometer tube for measuringdifferent types of pressure. ss sump tank of 50 literscapacity with drain valve, fhp centrifugal pump with motor, control panel with on / off switch, mains indicator, fuses etc.the setup should be arranged in a good quality paintedstructure and should be supplied with instructional manual., hydraulic system trainer kit:hydraulic trainer kit, consisting of the following matching components andaccessories :- 1. hydraulic power pack with 1 external gearpump having a delivery rate of 2.5 pm, approx @1400rpm operating pressure 60 bar, coupled to a single-phase ac motor 230 v ac having start capacitor andon/off switch and overload protection, 2 pressure reliefvalve adjustable from 0-60 bar, 3 oil reservoir> 5 literscapacity having sight glass, drain screw, air filter, and p andt ports. 2. pressure relief valve pilot-operated 3. drip tray.shell size 1160 mm x 760 mm 4. pressure gauge glycerin-damped, indication range of : 0-100 bar 5. four-waydistributor with five ports, equipped with a pressure gauge6. double acting hydraulic cylinder with a control cam, piston diameter 16 mm, piston rod diameter 10 mm, strokelength 200 mm. 7. suitable weight for vertical loading of //bid details4 / 130 hydraulic cylinder 8. mounting kit for weight for realizingpulling and pushing load 9. 3/2 way directional controlvalve with hand lever actuation 10. 4/2- way directionalcontrol valve with hand lever actuation 11. 4/3 waydirectional control closed-center position, with hand leveractuation 12. non-return valve 13. pilot-operated checkvalve pilot to open 14. one-way flow control valve withintegrated check valve 15. t- connector with self sealingcoupling nipples 2 nos. and quick coupling socket 1 no.16. profile plate, anodized aluminum, 100x700 mm, withcarriers, mounting frames and mounting accessories 17.dol starter, pneumatic system trainer kit:pneumatictrainer kit, consisting of the following matching componentsand accessories :-1. single acting cylinder max. strokelength 50 mm. bore dia 20 mm. 2. double acting cylindermax. stroke length 100mm. bore dia 200 mm magnetictype. 3. 3/2- way valve manually actuated normally closed4. 3/2-way valve pneumatically-actuated. spring return. 5.one-way flow control valve. 6. 5/2- way valve withmanually-operated switch 7. 5/2-way valve pneumatically-actuated spring return 8. 5/2-way valve pneumatically-actuated double pilot 9. 3/2-way roller lever valve directactuation normally closed 10. shuttle valve or 11. two-pressure valve and 12. pressure gauge 0-16 bar 13.manifold with self-closing nrv, 6-way 14. push buttonstation for electrical signal input with 3 illuminatedmomentary-contact switches 1 no + 1 nc and 1illuminated maintained-contact switch 1 no + 1 nccontact load 2 a. 15. relay station with 3 relays each with 4contact sets 3 no + 1 nc or change- over type. 5 a 16.3/2-way single solenoid valve with led 17. 5/2-way singlesolenoid valve with manual override and led. 18. 5/2-waydouble solenoid valve with manual override and led. 19.power supply unit, input voltage 85-265 v ac, outputvoltage : 24 v dc, output current : max 4.5 a, short-circuit proof. 20. profile plate . anodised aluminum 1100x700mm, with carriers. mounting frames and mountingaccessories., pelton wheel turbine test rig: outputpower: 1 kw. discharge : 350 lpm approx. supplyhead : 30 m. speed : 1000 rpm approx. impeller :bucket type, nozzle: materia| stainless steel. spear:material stainless steel. dynamometer: rope brake drumtype, drum dia. 200 mm. sump tank: capacity 200 ltrs. water circulation! centrifugal pump, ktrloskar/standardmake, 5 hp, discharge measurement: venturi meter withdifferential pressure manometer. control panel comprisesof: rpm measurement: digital rpm indicator with proximitysensor., francis turbine test rig: output power : 3 kw. discharge : 2000 lpm approx. supply head : 20 mapprox. speed : 1500 rpm approx. runner: curvedvanes type. dynamometer: rope brake drum type, drumdia 300 mm. sump tanl : capacity 400 ltrs. approx. water circulation: centrifugal pump, i|kioskar/standardmake, 15 hp, 3 phase. discharge measurement: venturimeter with differential pressure manometer. control panelcomprises of :rpm measurement: digital rpm indicator withproximity sensor., infrared thermometer :range unto 500degree celsius with digital display, digital pyrometer:opticalsensor radiation pyrometer for temperature measurementon small target to 0.0005 0.0127mm accuracy: 0.5%range selectable digital display: c, f, r, k standardtemperature ranges: unto 1000 c, adjustable emissivitysetting: 0.01 to 1.0, models of safety valve, blow off cock, steam stop valve, feed check valve, economizer:metallic //bid details5 / 130 cut section model, demonstration actual cut section modelof two stroke single cylinder petrol engine:originaldissected, two stroke single cylinder petrol engine of ascooter. engine consisting of carburettor etc. complete withall salient parts sectioned for study of the variouscomponents and their functions., model of solexcarburettor:original carburettor duly sectioned andmounted on base., model of amal carburettor:originalcarburettor duly sectioned and mounted on base., model ofwater cooling system of an automobile:metallic modelshowing various parts of water cooling system, model oflubrication system of i.c. engine :actual metallic modelshowing various parts of lubrication system, mpfi, fourstroke four cylinder petrol engine test rig with eddycurrent dynamometer: i. petrol engine: a four strokefour cylinder petrol engine developing about 85 hp withstandard accessories. engine provided with water cooledradiator system, self-starter with battery, dynamo, lubrication oil filter, fuel pump, ignition coil, exhaust silencer.engine provided with switches for conducting morse test.ii. loading device: an eddy current dynamometermust be provided with the engine which is directly coupledand should have cooling system. iii. suitable arrangementfor fuel consumption measurement. iv. latest suitablearrangement for air intake and exhaust gasmeasurement.temperature sensor for measuring the airintake temperature to be provided. a temperature sensoralso provided to measure the exhaust gas temperature.suitable arrangement for measurment of heat carried awayby cooling water. v. panel board : the entiretemperature and other parameter measuring devicesmounted on separate panel board. it also consists of ignitionand starting switch and switch assembly for cutting off eachcylinder for conducting morse test with control of eddycurrent dynamometer loading. , model of mpfi system:actual working metallic model showing various parts ofmpfi system, model of crdi system :actual working metallicmodel showing various parts of crdi system, tool kit:kitconsists of cutting toolstube cutter, bending tool, flaringtool, swaging tool & brazing tool for copper pipeused forrepair and maintenance of refrigeration equipmentequipment, pressure gauge : size 0-300 lb/sq inch., compound gauge : 30-0-150 lb. 2.5 dial 1/8 inches hpt, thermometer with case : range 0 to 250 degree celcius, leak dedector to detect cfc & hfcs:leak detector withprobe minimum 14 inch long made up of stainless steel andhose, led display, leak alarm and able to detect cfc hfcs, thermostatic switch, lp/hp cut out, overload protector, filters, strainers and filter driers: thermostatic switch, lp/hp cut out, overload protector, filters, strainers andfilter drier fitted on board, refrigeration cycle testingrig:vapour compression type consisting of refrigerationcycle demonstration equipments compressor : 1/3 hpcondensor fin : air cooled solenoid valve, expansion valve, capillary expansion, lp-hp cutout, pressure and compoundgauge : variac : for applying variable load in evaporatorammeter: digital 0 10a ac lc 0.01 amp voltmeter :digital 0 500v ac lc 1v rota meter: for measuring flowof liquid refrigerant, digital wattmeter for powermeasurement of compressor and heater. pressure gauge 0to 300 psi r-134a temp indicator 6 channel : digital, -500c to1500c lc 0.10c overall size : 4 x 2 x 5 approx , gas charging kit:fitted with vaccum pump withpipe line with different valves and pressure gauges. //bid details6 / 130

Central Government/Public Sector

TRN :35476684 | 16 Oct, 2025

Tender Value : 0

Kozhikode - Kerala

Tender for gem bids for 2 4 d, hygromycin b, rifampicin, kanamycin sulphate, acetosyringone, chloramphenicol, 6 bap, ms media, cefotaxime sodium salt, tryptone mb grade casitose mbgrade, potassium acetate mb grade, sodium chloride mbgrade, inositol, ampicillin sodium salt, murashige andskoog media, mgso4 7h2o, kh2po4, cacl2 2h2o, ki, boric acid, niacin nicotinic acid, sucrose, phyta jar roundcontainer, phyta jar square container, picloram, mnso4h2o, cobaltchloride hexahydrate, copper sulphate pentahydrate, edta disodium salt dihydrate, ferous sulphatehepta hydrate, sodium molybdate dihydrate, zincsulphate hepta hydrate, thiamine hydrochloride, glycine, pyridoxin hcl, naa, streptomycin sulphate, tetracyclinehydrochloride, mercuric chloride, petri plates, phyta wrap, stainless steel foeceps blunt 6inch, stainless steelfoeceps blunt 8inch, stainless steel foeceps pointed 6inch, stainless steel foeceps pointed8inch, stainless steelfoeceps pointed 10inch, potassium permanganate, stainless steel stand, stainless steel scalpel holder, sterilscalpel blade, sterial scalpel blade, tween 20, spermidine, centrifuge tubes 15ml, centrifuge tubes 50ml, test tubestand, stand for centrifuge tubes, wash bottles, metalloop ch2, metal loop-ss 4, autoclavable l spreader, disposable l speader, spatula, bluple nitrile examinatingloves large size, bluple nitrile examinatin gloves mediumsize, magnetic stirres bar, magnetic stirres, magneticrotors egg shape bar, parafilm m250, parafilm m125, nonabsorbent cottan wool, autoclavable aluminium foil, sodium hydroxide pellet, xgal, iptg, sds ultra pure, kinetin, fogger jet, hydrogen peroxide, peroxidesilver, hi clean liquid soap, hi spark alkaline cleaningsolution, indole 3 acetic acid iaa, agar powder, muarshigae and skoog medium, schenk and hildebrandtmedium, woody plant medium, mercuric chloride, potassium permanganate, silver nitrate, sodiumhypochlorite, potato dextrose agar granulated, potatodextrose broth granulted, nutreint broth, nutrient agar, acridine orange hi cert, sodium nitrate, sterile scalpelblade no 22, mrs agar modified, acetobacter agarglucose, plate count agar, rose bengal chloramphenicolagar, aspergillus differentiation medium base, yeastextract agar, polymyxin b sulfate, bacitacin, chloramphenicol, penicillin, cycloheximide, streptomycinsulphate, crystal violet, dileunt for dna extraction, isoamyl alcohol, 2 propanol, murashige and skoog medium, hipura r dh5a competent cells, bap, yep broth, yepmedia, acetosyringone, cephotaxime solution, dimethylsulphoxide dmso sterile, syringrame ndriven filters, luriabertani agar miller miller luria bertani agar, luria bertanibroth miller miller luria bertani broth, phytawraptm, 1miptg, x-gal solution 20mg ml, ethidium bromide solution10mg ml, hifibloetm nitrocellulose membrane for blotting, amoxycillin clavulanic acid potassium salt 5 1 augmentin, 6 benzyladenine, carbenicillin disodium salt, anapthaleneacetic acid, hygromycin b, inoculation loopmetaloop ch 2, phyta wrap cling film, slides staining jarcoplin type, holder stand, stainless steel forceps pointed, sterile disposable petriplates 90x25 mm, sodium hydroxidepellets, boric acid, potassium acetate, sodium chloride, tris free base, acetic acid glacial hi arr, trishydrochloride, diluent for dna extraction, chloroform

Central Government/Public Sector

TRN :35459433 | 17 Oct, 2025

Tender Value : 0

Khordha - Orissa

Tender for gem bids for 10 mirco liter micro volume sterile pipette tips, 200 mircoliter sterile pipette tips, 200 mirco liter universal fit pipettetips, 200 mirco liter universal fit sterile, filter tips, 2.0 mlsterile micro-centrifuge tube, 1.5 ml sterile, micro-centrifuge tube, 0.6 ml sterile, micro-centrifuge tube, 4 mlamber narrow mouth bottle, 8 ml amber narrow mouthbottle, 15 ml amber narrow mouth bottle, 30 ml amberwide mouth bottle, 30 ml wide mouth bottle, 60 ml amberwide mouth bottle, 60 ml wide mouth bottle, 125 mlamber wide mouth bottle, 125 ml wide mouth bottle, 250ml amber wide mouth bottle, 250 ml wide mouth bottle, 500 ml amber wide mouth bottle, 500 ml wide mouthbottle, 1000 ml wide mouth bottle, disinfectant absorbentwipes, alkaline cleaning solution, weigh boat - medium, weigh boat - small, weigh boat - large, 1200 micro literpipette tips, absorbent under pads, chemical absorbentpad lab soaker, autoclavable biohazard bags, 100 mlmeasuring cylinder, 10 ml serological pipette, 50 mlserological pipette, pipette aid aspirator, reagent reservoir, 1.5 ml amber coloured micro centrifuge tube, measuringscoop, long handle sampling spoon, nitrile powder freegloves small, nitrile powder free gloves medium, nitrilepowder free gloves large, disposable wipes small, disposable wipe big, conical centrifuge tube rack, parafilm, cryogenic tags big, cryogenic tags small, tube stickerslabels, octagon magnetic stirrer bar, 15 ml sterilecentrifuge tubes, 50 ml sterile conical centrifuge tube

Central Government/Public Sector

TRN :35420342 | 16 Oct, 2025

Tender Value : 0

Bangalore - Karnataka

Tender for gem bids for rammodel oem specified dualchannel ddr 41866oc13331066 mhz 8 gb hard disk interfacesata 6gbscache 8mbcapacity 1tbarea densityavgaverage latency 416msrandom read seek time85ms mouse with mouse padusb mouse optical withmouse pad keyboardkeyboard usb keyboard 104keyscomfortable as per technical specification motherboard motherboard with following config intel corei7i5i3processor supported microatx form factors 1066800533 mhz system bus processorintel processorcore i7 307 ghz 4 mb lga1156 1333 or higher confic speaker 51 inspire inspire 5 1 approx speaker power25w rms per channel 4channel sub woofer power 17wrms as per technical specification cabinet mini towercabinet with 450w500w smps iball length40cms as pertechnical specification smpsmodel oem certifiedcoolermastercorsair etc 720 watt or more ups 1 kva1000va line interactive upsoutput power capacity 600watts 1000 vamax configurable power 600 watts asper technical specification lan card specificationsstandards ieee 8023 10baseas per technical specification 23 inch led monitor non touch23 inch led monitornon touch graphics accelerator card nvidianvidiageforce gtx 9800 graphics as per technical specification dvd rw drive os windows 81 professional hdmito hdmi cable 6 mtr for 5inch lcd monitor 5inch lcdmonitor lan cabling 10 mtr rotary encoder rotaryencoder jencoderj775sl ppr1000 micro switch buttontype round type contact rating 6 amp micro switch longleaf single pole double throw with leafstock no 1594590contact rating 6amp 250v acmechanical life15x10000000 operation stm 32 hs microcontrollerscortex m33 cores 250 mhz 128 kbytes to 2mb of flash bid number gem2025b6651747 dated 16-09-2025 0 0 bid document1 124 0 0 2 2 memory and uptp 640 kbytes of ram or eqvt, electronicguidance unit , relay pcb , 37 pin circular connectormale , 37 pin circular connector female , push buttonswitches , dpdt toggle switch , dpdt momentary 3 wayswitch on off stdby , sunshade fiber glass , 13 pincircular connector male , 13 pin circular connectorfemale , audio cable 10mtr , usb cable 05mtr male tofemale , power spike 5 15 amp 07 socket with safetyfuse , encoder controller board , 13 pin circularconnector socket and pin , pj 16 pvc gland , wago mcs 3pin male female connector , wago mcs 4 pin male femaleconnector , relimate 20pin and 14 pin connector , molexconnector 4 pin , power connector 250v 10amale female , 3 pin 15a plug anchor , meanwhile smps ac input 230v dc output 12v 28 a , relay12v 20 30a , microswitch 5 amp 250v , momentaryswitches 1020x 1620x calonix , 12v 20a solenoid , led with circuit board fire tube , smps holder gvs , magnetic reed switch , rotary switch three position , hall sensor with pcb and magnets , hdmi 5mtr cable haze , hdmi 3 mtr haze , power cables three core1 5mm , teflon cables 10mtr orange black white , spring wire steel 2 mtr , dp to hdmi converter haze , eye piece rubber , sleeve 1mm , sleeve 2mm , sleeve18 mm , aux cable 5 mtr , fire tube rear glass , clockand humidity sensor htc 1 , fire extinguisher life securedry chemical powder 2kg , gen set ep 1000 honda , clamp for elevation encoder as per drg hled in 515 atgmsec, instructor station as per drg hled in 515 atgm sec, aluminum frame with abs sheet with 2 5mm as per drghled in 515 atgm sec, isa frame 25x25x3 as per drg hledin 515 atgm sec, front sheet as per drg hled in515 atgm sec, left and right sheet as per drg hled in515 atgm sec, top partion sheet as per drg hled in515 atgm sec, tray as per drg hled in 515 atgm sec, top sheet as per drg hled in 515 atgm sec, base plate6mm thk as per drg hled in 515 atgm sec, solenoid valveholding sheet 1 as per drg hled in 515 atgm sec, m3csk screws as per drg hled in 515 atgm sec, magnetbase plate 50x18x5mm thk as per drg hled in 515 atgmsec, cradel left 440x44 7x7thk as per drg hled in515 atgm sec, cradel right 440x44 57x7mm as per drghled in 515 atgm sec, cylinder 1 dia17x2thk x66lg asper drg hled in 515 atgm sec, cylinder 2 dia20x2thk x66lg as per drg hled in 515 atgm sec, bush dia32xidx3thk as per drg hled in 515 atgm sec, slider 3 as per drg hled in 515 atgm sec, 1 2 flat80x66x1 2thk m s flat as per drg hled in 515 atgmsec, spring part 280x62x28thk as per drg hled in515 atgm sec, cylinder rod dia19x142 5lg as per drghled in 515 atgm sec, cradel welded part34x32x15thk as per drg hled in 515 atgm sec, slottednut m10 as per drg hled in 515 atgm sec, cradel frameleft470x16x9thk as per drg hled in 515 atgm sec, cradel frame right 470x16x9thk as per drg hled in515 atgm sec, m16 nut as per drg hled in 515 atgm sec, m16 stud as per drg hled in 515 atgm sec, spring clamp54x18x2thk as per drg hled in 515 atgm sec, springshaft dia13x184 5lg as per drg hled in 515 atgm sec, spring bush dia13x9lg as per drg hled in 515 atgm sec, spring 1 as per drg hled in 515 atgm sec, spring 2 as perdrg hled in 515 atgm sec, bush 2 dia17x10lg as perdrg hled in 515 atgm sec, bolt as per drg hled in515 atgm sec, cylinder part 74 43x45x21thk as per drg //bid details2 / 124 hled in 515 atgm sec, cylinder extend 180x22x10thk asper drg hled in 515 atgm sec, pin as per drg hled in515 atgm sec, ti sight holder as per drg noao 515 atgm, left sheet 280x100x2thk as per drg hledin 515 atgm sec, front sheet 280x168x2thk as per drghled in 515 atgm sec, right 242x125x2thk as per drghled in 515 atgm sec, cover with body sheet280x166x2thk as per drg hled in 515 atgm sec, rearsheet 100x64x2thk as per drg hled in 515 atgm sec, bottom sheet 148x96x2thk as per drg hled in 515 atgmsec, top body sheet 255x188x2thk as per drg hled in515 atgm sec, top sheet 195x188x2thk as per drg hledin 515 atgm sec, cover with body 282x168 as per drghled in 515 atgm sec, push buttons as per drg hled in515 atgm sec, csk screws m3x15mm lg as per drg hledin 515 atgm sec, csk screws m3x25mm lg as per drghled in 515 atgm sec, csk screws m2x10mm lg as perdrg hled in 515 atgm sec, allenkey bolts and nutsm6x15mm lg for handle as per drg hled in 515 atgmsec, ti sight clamp holder as per drg hled in 515 atgmsec, day sight as per drg hled in 515 atgm sec, daysight clamp holder as per drg hled in 515 atgm sec, daysight holder with shaft as per drg hled in 515 atgm sec, electronic cover unit elevation encoder casing optics asper drg hled in 515 atgm sec, eye piece 02 lenses and 01mount as per drg hled in 515 atgm sec, reducer 02lenses and 01 mount as per drg hled in 515 atgm sec, right angle prism 30mm 02 nos as per drg hled in515 atgm sec, trigger spare springs as per drg hled in515 atgm sec qty 07, trigger block as per drg hled in515 atgm sec, trigger cup as per drg hled in 515 atgmsec, lever cover as per drg hled in 515 atgm sec, cocking handle as per drg hled in 515 atgm sec, solenoidwith 12v dc and 20 amps as per drg hled in 515 atgm sec, screw driver set, spanner tubular 17 inch, allen key set0 5to 10mm, cutting plier, nose plier, user hand book, technical mannual, log book, table computer 2x3 5feet wooden instructor table, kent chair rotation chairwith backrest and arm rest with wheel assy , dvd, sleeve1 5mm, wiring harness, soldering soft 500g roll, plasticties 200mm, plastic ties base 200mm, insulation tape 10mtr, bubble sheet 5 mtr, hassian cloth 5 mtr width, packing tapram model : oem specified, dual-channel ddr 41866o.c/1333/1066 mhz 8 gb, hard disk interface sata6gb/s, cache 8mb, capacity 1tb, area density avg329gb/in2, guaranteed sectors 488, 397, 168, spin speedrpm 7, 200 rpm or higher confic average latency4.16ms, random read seek time <8.5ms, random write seektime <9.5ms.- segate., mouse with mouse pad usb mouseoptical with mouse pad, keyboard keyboard usb keyboard104 keys, comfortable, quiet typing, spill-resistantdesign, durable keys, sturdy, adjustable tilt legs, plug-and-play lenght -45cms, width -15cms, mother board motherboard with following config: - - intel corei7, i5, i3processor supported. - microatx form factors -1066/800/533 mhz system bus * support for ddr3 1333/1066 mhz dimms * support for up to 16 gb of systemmemory, 8-channel 5.1+ 2 independent multi-streamingaudio subsystem with three analog audio outputs using therealtek alc888s* audio codec, * up to twelve usb 2.0 ports* six serial ata 3.0 gb/s ports, with two ports compatiblewith esata dongles * one serial port header * one parallelport header * one back panel ps/2 connector * one pciexpress* 2.0 x 16 bus add-in card connector * two pci //bid details3 / 124 express 2.0 x 1 connectors * three pci slots . ps/2 portsupports key board and mouse- with on board / externalcommunincation port com port for rs-232communication/or higher confic, processor intel processorcore i7 3.07 ghz /4 mb / lga1156 / 1333 or higher confic, speaker 5.1 inspire inspire 5 :1. approx - speaker power:25w rms per channel 4channel. sub woofer power 17wrms. frequency response: 40 hz ~ 20 khz, s/n ration :80db, distortion :1 %, satelite speaker:lxwxh7cmx8cmx18.3cm. sub woofer:19cmx19cmx19cm. wiredremote control :2cmx6cmx3cm. power 12v ac 2.9ampadopter.volume control with on/off switch.audio cable fromcomputer to sub woofer. extended audio cable moldedone end male connector and other end female connector 15mtrs-qty 4 and all standard accessories to be provided., cabinet mini tower cabinet with 450w/500w smps iballlength-40cms, height 37 cms smps should have 24 pinconnector and sata power connectors, smps model : oemcertified coolermaster/corsair etc; 720 watt or more, ups1 kva 1000va line interactive ups output power capacity600 watts / 1000 va, max configurable power 600 watts /1000 va, nominal output voltage 230v, output connections2/3-pin 6a surge protection 2/3-pin 6a battery backup, input nominal input voltage 230v, input frequency 47 - 63hz, input connections bs 546a, cord length 1.98meters, input voltage range for main operations 175 -295v, input voltage adjustable range for mains operation, power outlet : 4x battery backup & 1x surge, on batteryoutlet voltage : 230v 8%, frequency range :50/60hz 5%, automatic voltage regulation avr :increase on linevoltage by 12%, reducecs on line voltage by11%., adjustable sensitivity and transfer voltage : low, medium and high, typical recharge time : 8 hrs, powerchutepersonal edition v2.0 for windows 2000 & xp multilanguage support, lan card specifications standards ieee 802.3 10base-t ethernet, ieee 802.3u 100base-txfast ethernet, ansi/ieee 802.3 nway auto-negotiation, ieee 802.3x full duplex flow control support network datatransfer rate, ethernet: 200mbps full-duplex, featuresdimensions item wxdxh: 4.9 x 4.8 x 0.5 packagingwxdxh: 9.3 x 9.7 x 1.5, 23 led monitor nontouch 23 led monitor non touch, graphics acceleratorcard nvidia nvidia geforce gtx 9800 graphics acceleratorcard 4 gb ram, 16x pci express/morphics ver 9.0, supportdual link dvi 2560x1600 resolution display outs puts, anddual link hdcp capable, open gl 2.1 support, pci express 2.0support or higher configaration, dvd r/w drive , oswindows 8.1 - professional , hdmi to hdmi cable 6 mtr for5 lcd monitor , 5lcd monitor , lan cabling 10 mtr , rotary encoder rotary encoder jencoder-j775-sl ppr-1000, micro switch button type round type contact rating 6amp, micro switch long leaf single pole double throw withleaf.stock no: 159-4590 contact rating: 6amp 250vac.mechanical life : >1.5x10000000 operation, stm 32 hsmicrocontrollers cortex m33 cores, 250 mhz, 128 kbytes to2mb of flash memory and uptp 640 kbytes of ram or eqvt, electronic guidance unit , relay pcb , 37 pin circularconnector male , 37 pin circular connector female , pushbutton switches , dpdt toggle switch , dpdt momentary3-way switch on/off/ stdby , sunshade fiber glass , 13pin circular connector male , 13 pin circular connectorfemale , audio cable 10mtr , usb cable 05mtr male tofemale , power spike5/15 amp 07 socket with safetyfuse , encoder controller board, 13 pin circular connector //bid details4 / 124

State Government

TRN :35409442 | 03 Oct, 2025

Tender Value : 0

Darrang - Assam

Tender for gem bids for as, determination of moment of inertia of a flywheel -completeapparatus with 8 inch counter type and weights determination of youngs modulus of a wire by optical levermethod -with laser diode or weights or scale arrangements determination of modulus of rigidity of a wire by maxwellsneedle -with digital balance or long wall bracket or digitalstop watch to measure voltage and time periodic waveform of cro to determine coefficient of viscosity of waterby capillary flow method -poiseuilles method barpendulum -complete set with wall clamp and other basicaccessories katers pendulum -complete set with wallclamp and other basic accessories determination of selfinductance of a coil by rayleighs method measurement offield strength b and its variation in a solenoid -determinedb or dx to verify thevenin and norton theorem halfadder full adder and 4-bit binary adder ta build 4 bitcounter using d rypelj-k flip-flip and ics and study rimingdiagram to determine the hall coefficient of asemiconductor sample to draw the bh curve of fe usingsolenoid and determine energy lose from hysteresis ballistic galvanometer to compare capacitances usingdesautys bridge determination of self inductance of a coilby andersons bridge determination of wave length ofsodium light using newtons ring -with spectrometer determination of stefans constant determination ofcoefficient of thermal conductivity of cu by angstromsmethod determination of coefficient of thermalconductivity of cu by searles apparatus to study thevariation of thermo-emf of a thermocouple with differenceof temperature of its two junctions to calibrateresistance temperature device -rtd using null method oroff-balance bridge study of v-i and power curves of solarcell and find maximum power point and efficiency to study bid number gem2025b6691191 dated 18-09-2025 0 0 bid document1 101 0 0 2 2 the characteristics of a bipolar junction transistor-bjt in ceconfiguration., to study the various biasing configuration ofbjt for normal class-a operation., to study the analog todigital convertor -adc ic., to design an inverting amplifierusing op-amp -741351 for dc voltage of given gain., toinvestigate the use of an op-amp as an integrator anddifferentiator., t show the tunnelling effect in tunnel diodeusing i-v characteristics, to determine the ionizationpotential of mercury., to determine the specific rotation ofsugar solution using polarimeter., to study the reflectionrefraction of microwave., to determine the refractive indexof glass and liquid by total internal reflection using agaussian eyepiece., digital magnetic stirrer withtemperature control, sulphuric acid lr -about98percentage 2.5 l, hydrochloric acid lr -1.18 2.5l, nitric acid lr 69-72percentage -1.41-1.42 2.5l, orthophosphoric acid about 85percentage 500ml, bromine ample-5x20 ml, butanol-500 ml, sodiumbicarbonate-sodium hydrogen carbonate-500g, carbon tetrachloride-500 ml, ethanol-500 ml, benzoicacid for synthesis-500g, resorcinol-500g, salicylic acid-500g, acetic acid glacial 99.5percentage-500 ml, aniline-500 ml, zinc -metal dust-500g, magnesiumribbon-pkt, stannous chloride-100g, mercuric chloride-100g, zimmermann reinhardt solution-100 ml, methylred solution 125ml, ammonium oxalate pure-500g, whattman 40 filter paper-pkt, ammonium thiocyanatepure-500g, methylene blue-125 ml, ammoniummolybdate-100g, ninhydrin solution-100 ml, ammoniumsulphide solution 20percentage -yellow-500 ml, chloroform-500 ml, disodium hydrogenphosphateanhydrous-500g, formaldehyde solution37percentage-41percentage w or v-500 ml, manganesedioxide-500g, mohrs salt -ammonium ferrous sulphate-500g, potassium nitrite crystals-500g, sodium nitrite-500g, aluminium potassium sulphate pure-500g, phthalic acid-500g, phenyl hydrazine-250ml, sodiumhypochlorite solution -chlorine 5percentage, sodiumperoxide ar granular- 100g, hot air oven 14x14x14digital ss with fan, ph meter -pen type, stop watch-small, set for thin layer chromatography, kipps apparatus, wireguaze, platinum loop, polarimeter, ostwald viscometer, stalagmometer, standard ph capsules 4610, thermometer, desiccator, glass funnel, filter stand, measuring cylinder 5ml, measuring cylinder 10ml, pipette10ml, pipette 20ml, pipette 25ml, spatula, beaker 100ml, beaker 250ml, beaker 500ml, beaker 1000ml, conicalflask 100ml, conical flask 250ml, conical flask 500ml, digital balance 3 digit 0.001gm to 300gm, filter paperwatsman-pkt, centrifuge machine 6000 rpm -digital tabletop centrifuge, elisa plate reader, micropippette, simplemicroscope -compound microscope, acetic acid -glacial-500ml, aceto carmine solution-100ml, agar agarbacteriological-100gm, agar agar powder forbacteriology-500gm, acetone-2.5l, glass slides- frostedglass slide-pkt, aniline blue-100gm, indole-3-aceticacid -iaa for biochemistry-25gm, benedicts reagent -qualitative-500ml, biuret reagent- 125ml, crystal violet-100gm, d-glucose anhydrous-250gm, dextrose -anhydrous-500gm, diphenyl amine-100g, distilled water-5l, dpx-250ml, fast green staining solution-125ml, fungal specimen, gentian violet-125ml, glycerine-500ml, hydrochloric acid-500ml, iodine solution-500ml, lactophenol-500ml, magnesium sulphate-500gm, //bid details2 / 101 malachite green-25gm, n-butyl alcohol-500ml, ninhydrin-25gm, paraffin wax 58-60 c solid-500gm, petroleumether-500ml, safranin solution-125ml, silica gel-500gm, sodium chloride -nacl-500gm, sodium hydrogen carbona-500gm, sodium hydroxide pellets-500gm, stannouschloride-100gm, sucrose solution -stock-500gm, coverslips- box english glass 22x22 square-pkt, sulphuric acid-500ml, zoology laboratory equipments ref boq

Central Government/Public Sector

TRN :35409681 | 06 Oct, 2025

Tender Value : 0

Liluah - West Bengal

Tender for supply of fluorescent magnetic powder- oil.

Corporations/Associations/Others

TRN :35488468 | 09 Oct, 2025

Tender Value : 20.10 Lacs

Kanigiri - Andhra Pradesh

Tender for operation and maintenance of cpws scheme including salaries, cost of materials for transformer & motor repairs, and bleaching powder for supply of drinking water to kanigiri municipality for six months.

Central Government/Public Sector

TRN :35490379 | 09 Oct, 2025

Tender Value : 0

Kutch - Gujarat

Tender for gem bids for 0 rope polypropylene 20 mm isi mark, packing polythenesheet on handle 50 cm width 2 mtr roll, super mop withhandle, automatic air freshener, anti corrosive compound, instant glue, fender coir turk head, call boat swains, tray paint roller, tape measuring 15 mtrs, face mask, fluorescent tape yellow 4 inch, chain ni silver for call boatswin, ear seal for protector plug 3m, wire connection lugs, rj 45 connection, turpentine oil solvent, white spirit, twine sewing medium flax, twine sewing fine, tape rollseal teflon thread of 12 mtr length, wiper soft rubber, wind socks, silicon sealant compound 300 ml tube, solder lead, rope polypropylene 16 mm isi mark, ropepolypropylene 08 mm isi mark, rope polypropylene 06 mmisi mark, rope polypropylene 04 mm isi mark, ropepolypropylene 12 mm isi mark, rope polypropylene 10 mmisi mark, silicon cartridge water proof, sand paper, rubberise gloves, linseed oil boiled, polythene bag 14 x18 x 75 micron, petroleum jelly, oil and grease remover, lint free cloth, polythene bag 14 x 16 x 75 micron, polythene bag 14 x 20 x 75 micron, poly vinyl acetatedisperson based adhesive, lip seal for fire hydrant, detergent solution, heat resistant gloves for galley, funnel 5 inch, cloth emery 11 x 9 inch, dust pan, drychemical powder, hacksaw blade 12 inch, fluorescenttape for night marking of emergency ways lifebuoys, gloves leather a, cloth flanet 4 by 2, cloth hassianmedium 102 cm wide rot proofed, cloth emery b5 grade 1, cloth coated pvc, clip jubilee 5 inch, cloth terry flexcotton 36 inch width, cloth calico grey 36 inch wide, cloth bunting red 36 inch width, cloth bunting green 57inch width, brush scrubbing large, cable tie 8 inch, 2core cable 6a, plastic bucket 20 ltr, plastic bucket 15 ltr, boric powder, bleaching powder stabilised, baygon sprayor equivalent, araldite adhesive 180 gms, jubilee clip 1inch, clip jubilee 3 by 4 inch //bid details2 / 51

Central Government/Public Sector

TRN :35491475 | 09 Oct, 2025

Tender Value : 0

Vadodara - Gujarat

Tender for supply of duster, cotton khadi, bleached (v2) conforming to is 3777 (q1

State Government

TRN :35492511 | 20 Oct, 2025

Tender Value : 0

Jammu - Jammu And Kashmir

Tender for gem bids for conc, absolute ethanol, acetic acid, ammonia solution, chloroform, conc hcl, di water hplc grade, glycerol, phenolphthalein indicator, sodium hydroxide, sulphuricacid, glycine buffer, 5hmf, xylose, sodium chloritenacl02, potassium periodate, citric acid monohydrated, microcrystalline cellulose, 1phenyl3methyl5pyrazolone pmp, barium carbonate baco3, methanol hplc grade, acetonitrile hplc grade, sodium acetate ch3coona, monosaccharide standards glucose, monosaccharidestandard, monosaccharide standards arabinose, monosaccharide standards mannose, monosaccharidestandards fucose, monosaccharide standards glucuronicacid, monosaccharide standards nacetylglucosamine, myoinositol, chloroform hplc grade, toluene hplc grade, hexane hplc grade, fatty acid methyl ester famestandard, triolein, phosphatidylcholine, monogalactosyldiacylglycerol, tripentadecanoin, isopropanol, acetone hplc grade, pigment standards, bhtbutylhydroxytoluene, tris trizma base, ammoniumchloride, magnesium sulphate heptahydrated, calciumchloride dihydrated, manganese chloride tetrahydrated, cobalt chloride hexahydrated, ammonium molybdatetetrahydrate, trichloroacetic acid tca, 2 4dinitrophenylhydrazine dnph reagent, thiourea, na2co364mm nahco320mm in water, hno334mmdipicolinic acid, nobistrimethylsilyl trifluoro, benzoic acid, sodium carbonate, magnesium hydroxide, aluminium hydroxide, bleaching powder, magnesiumchloride, toluene reagent, benzaldehyde, orthophanthroline, turbidity meter, trichloroacetic acid, sodium bicarbonate, tollens reagent /bid number: gem/2025/b/6738179* /dated: 29-09-2025 & & / bid document1 / 42

Related Searched Keywords : magnetic powder

List of magnetic-powder Tenders

Tender for supply of fluorescent magnetic powder- oil.

Tender for operation and maintenance of cpws scheme including salaries, cost of materials for transformer & motor repairs, and bleaching powder for supply of drinking water to kanigiri municipality for six months.

Tender for supply of duster, cotton khadi, bleached (v2) conforming to is 3777 (q1

Get magnetic powder Tender Alert...

Related Searched Keywords : magnetic powder

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us