Filters

List of load-box Tenders

List of latest load-box Tenders in Indian Tenders. Click on any load-box Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for load-box Tenders.

All-Tenders (75)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35788227 | 13 Nov, 2025

Tender Value : 0

Panaji - Goa

Tender for gem bids for air filter sensor mt 00006809, filter cartridge mt90031462, filter cartridge mt 90031463, filter mt90028620, footswitch mt 00005212, fuel water separator, fuse box mt 92049380, head light mt 00006753, joystick steer and drive, joystick mt 00005394, key switchmt 00006133, limit switch mt 00003167, load sensoramplifier, load sensor mt 00006204, oil suction andreturn filter, power switch mt 92049050, pressure filter mt00001871, pressure filter mt 00002744, proximity switchmt 00006642, push button green mt 00006138, pushbutton red mt 00006137, push button red mt 00006154, push button yellow mt 00006139, red mushroom head mt00000754, safety cartridge mt 90031459, select switchhead mt 00002566, switch mt 00000655, switch togglemt 00005401, switch toggle mt 00006134, valve mt90029888, valve mt 92102189, alarm mt 00002326, base with 1 nc contact mt 0000, base with 1 no contactmt 0000, contactor make schineder electric type tesys fmodel lc1f50, contactor preheat mt 00002918, doormagnetic switch mt 000062, filter cartridge mt 90031461, key switch mt 90173, relay mt jd1914, o ring mt 10 point77 into 2point62, balance valve mt sta0622r4g38c, solenoid directional valve mt, air filter grade 1 mt p82888, air filter grade 2 mt p82933, oil filter mt lf17356 5266016, diesel filter mt fs36209, high pressure filter mt lh0110, high pressure filter mt plfx 3, oil return filter mt fax 250a1, suction filter mt wui 250a 80f, oil water separatormt fs 2002

Central Government/Public Sector

TRN :35773853 | 21 Nov, 2025

Tender Value : 0

Jabalpur - Madhya Pradesh

Tender for supplying, stacking and loading into railway ed wagons/boxes/hoppers stone querry dust/boulders and unloading at makronia /girwar /patharia /damoh /ghatera/sagoni / any where in bina-katni section.

Central Government/Public Sector

TRN :35775098 | 24 Nov, 2025

Tender Value : 0

Darjeeling - West Bengal

Tender for gem bids for tiles ceremic 300x300mm, load bearing concrete hollowblocks of size 400mm x 200 mm x 200 mm, cement opc43 grad, pbs roll of size and 20.00 mtr long, tarpaulinehdpe laminated 30x20 ft, water proof tarpaulin polythene30x30 ft, wall putty, glass putty, synthetic enamel paintcolour black, synthetic enamel paint colour white, synthetic enamel paint colour og, synthetic enamel paintcolour red, synthetic enamel paint colour blue, syntheticenamel paint colour yellow, synthetic enamel paint colourgreen, synthetic enamel paint colour brown, syntheticenamel paint red oxide, paint brush 2 inch, paint brush 3inch, paint brush 4 inch, pvc door handle, pvc doorhinges, pvc door size 7 x 3 ft, thinner, white cement, black screw 1 inch, black screw 1 point 5 inch, self tapingscrew 25mm, star head screw, chinese screw 1 inch, plywood 8 x 4 x 6mm thick, nails 2 inch, nails 3 inch, hdpelaminated sand bag of size 75 x 40 cm, door curtain rod, ss curtain bracket, cgi sheet 810 x 3050 mm long 0.5mmthick 10 ft, led tube light fitting 1 x 12 w 2 ft, led tubelight fitting 1 x 18 or 22 w 4ft long, led bulb 5 w, ledbulb 7 w, led bulb 9 w, led bulb 12 w, led securitylight 20 watt, 2 core copper wire 3 mm, pvc insulatedcable 1 point 5 sqmm single core copper conductor, pvcinsulated cable 1 point 5 sqmm 2 core copper conductor, cable pvc insulated unsheathed single core flexible copperconductor 1100v grade of size 2 point 5 sqmm, pvc switchbd 4 x 4, pvc switch bd 6 x 4, pvc switch bd 6 x 8, switchsocket 5 amp with box, switch socket 15 amp with box, switch 5 amp, switch 15 or 16 amp, socket 5 amp, socket15 amp, switch socket combination 3 or 5 pin 5 or 6 amp, switch socket combination 5 or 3 pin 15 or 16 amp, plug 3pin 5 or 6 amp, plug 3 pin 15 amp top, insulation tape, pvc insulation tape 2 cm wide 10 mtr long, mcb 6 amp 240v, mcb 20 amp 240 v, mcb 10 amp sp, mcb 16 amps spwith box, mcb 32 amp sp with box, isolator 40 amp dp240v, mcb box b20, mcb box c20, mcb distributionboards in sheet metal enclosure 4 ways double door withblanks confirming to is 8623, mcb distribution bd sheetmetal 8 way, gi gang box 4 way, pvc exhaust fan 150mmsweep, pvc exhaust fan 300mm iron, bed switch on offswitch, piano switch 5 amps, pvc casing caping 25x16 mm, pendent holder, angle holder with skirt, angle holder, pvc ceiling rose 2 or 3 terminal, ppr pipe 20mm dia, pprpipe 3 layer dia 40mm 6 mtr long, ppr socket 40mm, pprtee 40mm, ppr elbow 40mm, ppr female threaded socket20 or 15 mm dia, pvc elbow 25mm, ppr socket 25mm, ppr union 40mm, pvc union 25mm, ppr tee reducer 40 or32mm, pvc tank connector 2 inch, tape teflon, pvcconnection pipe 450mm, towel rail cp 750mm long, hdpetank tank 500 ltr capacity, rotational mouldedpolyethylene water storage tank double layer 1000 ltrcapacity make star or comfort or sintex, bib cock brass15mm, pvc bib cock 20mm, brass stop cock 15mm, pvcstop cock 20mm, ball brass float valve 15mm, ppr stopvalve 20 mm, ball valve 1 inch 25mm, snow white coloureuropean wc with s or p trap concealed of size650x405x770m with sheet cover, wc indian type, wcindian type steel, waste pipe for wash basin, whb steel, wastage pipe for urinal pot, looking mirror 600mm x450mm, fire extinguisher 2 kg

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

Central Government/Public Sector

TRN :35764486 | 20 Nov, 2025

Tender Value : 0

Jorhat - Assam

Tender for gem bids for 2 mp starlight ptz camera, 5 mp bullet camera, 64 inchnvr support 4 x sata, 110inch diagonal video data wall, 15ft camera pole with solar panel, poe adaptor with sfpgiga media converter, 8sfp giga for media converter, polemount waterproof rack, 27u loaded floor standing rack, 10 kva online ups with inbuilt battery, 24 core armouredfiber cable, 12 core armoured fiber cable, fiber liu 48port, fiber patch cord lc to lc and sc lc, 24 port l3manageable enterprise sfp switch, sfp 1g module for l3switch, sfp 10g module, jc box capsule 24 core, cameramount for ptz, camera mount for bullet, cat6 armouredcable, 2 core power cable, intrusion alarm system, installation of cameras laying of cables overhead and underground

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

corporations/Associations/Others

TRN :35757991 | 21 Nov, 2025

Tender Value : 0

Neyveli - Tamil Nadu

Tender for gem bids for viton oil seal size 72-42-10 , viton oil seal size 65-45- 7 , viton oil seal size 37-25-7 , viton oil seal size 42- 25-7 , viton oil seal size 52-35-10 , neoprene oil seal of size 52 x 35 x 7 mm , viton oil seal size 80-58-10 , viton oil seal size 40-25-10 , viton oil seal size 35x72x10mm thickness , viton oil seal size 62-42-10 , viton oil seal size 38-24-10 , viton oil seals , viton oil seal size 55-40-6 , viton single lip spring loaded oil seal , oil seal for gear box 40 x 60 x 10

Central Government/Public Sector

TRN :35745319 | 19 Nov, 2025

Tender Value : 67.28 Lacs

Kottayam - Kerala

Tender for gem bids for sitc crs radio station transmitter of 50 w fm set 1 plus 1 , sitc of self supported transmission tower , vhf transmitting antenna , low loss feeder cable with n connector , studio monitor speaker , on air broadcast console etc , dynamic cardioid microphone , portable solid state field recorder , headphones , broadcast audio processor , dummy load with connector , extra lightening protection circuit , 19 equipment rack ht 5 ft mts equivalent , work station with antivirus for 3 years , audio editing software , automation scheduling software licence , condensor microphone with wind filter and arm stand , audio distribution amplifier , headphone distribution amplifier , 10 kva online ups , xlr 6 microphone junction box , professional audio line cable , professional microphone cable , xlr connecter male and female , trs stereo connecter , professional on air studio light , digital clock with time , supply and fixing of work station table , supply and fixing of vob table , supply and fixing of discussion table l shape , supply and fixing of on air table and side table , supply and fixing of shoe rack , supply of low frequency acoustic treatment , supply of acoustic treatment , teak board skirting , supply of observation window2 , supply of sound proof door with frame chaukhatt , supply of executive chairs revolving, standard , supply of visitor chairs revolving, standard , t.v 56 inch standard led type ips panel , sitc of vrv vrf 10.0 hp odu , sitc of cassettee unit 1.0hp , sitc of cassettee unit 2.0hp , sitc of cassettee unit 2.5hp , sitc of remot , supply, installation, testing and commissioning of y joints , supply and fixing of refrigent copper pipe with insullation , supply and fixing of refrigent conduit pipe 25mm pvc , internet works sitc of optic fibre cable 6 core sm , sitc of patch cord ofc - 3 meter sc-lc , sitc of pigtail ofc - 1 meter , sitc of cat-6a cable , sitc of 19 inch 6 u rack , sitc of lan system , sitc of liu 12 port , sitc of patch cord cat-6 -1 meter , sitc of patch cord cat-6 -2 meter , sitc of patch cord cat-6 -10 meter , supplying and fixing io box alongwith base and cover plate , sitc of cctv camera with night vision - 5 mp , supply and fixing of cat-6 wire in pvc conduit , sitc of cctv camera , fire work sitc talk back slave station , sitc smoke detector with built in led , sitc 6 kg powder type fire extinguishers , citc 2 kg powder type fire extinguishers , sitc addressable manual call point complete as required. , civil works as per boq , cement work as pe boq , providing and laying in position cement concrete of specified grade , double charge vitrified tiles , centering and shuttering , steel reinforcement for r.c.c. work , smooth finishing of the exposed surface of r.c.c. work , brick work with common burnt clay , 12 mm cement plaster of mix , wood frames of doors, windows, clerestory windows , isi marked flush door shutters , polishing in high gloss matt finish melamine , bright finished brass hanging type floor door stopper , false ceiling with cove and design at all height , providing and applying white cement based putty , wall painting with acrylic emulsion paint , 2mm thick pvc mat finished on floor of approved design , sitc of vertical blinds , electrical works , wiring for light point etc , wiring for circuit , supplying and fixing following modular switch etc , supplying and fixing following modular switch socket , supplying and fixing following modular switchs , supplying and fixing modules , supplying and fixing following way , supplying and fixing miniature circuit breaker , miniature circuit breaker suitable for inductive load , supplying and fixing single pole blanking plate , supplying and fixing of following sizes of medium class pvc conduit , supplying and fixing suitable size gi box wih modular plate , frls pvc insulated copper conductor , frls pvc insulated copper conductor 2 , frls pvc insulated copper conductor3 , frls pvc insulated copper conductor,4 , 3x2.5 mm flexible wire for connection , wiring for group controlled , led 2x2 luminaire 36w , recess mounted led downlighter , electrical earthing sitc crs radio station transmitter of 50 w fm set 1 plus 1, sitc of self supported transmission tower , vhf transmitting antenna, low loss feeder cable with n connector, studio monitor speaker , on air broadcast console etc, dynamic cardioid microphone, portable solid state field recorder, headphones, broadcast audio processor, dummy load with connector, extra lightening protection circuit , 19 equipment rack ht 5 ft mts equivalent, work station with antivirus for 3 years, audio editing software, automation scheduling software licence, condensor microphone with wind filter and arm stand, audio distribution amplifier, headphone distribution amplifier, 10 kva online ups, xlr 6 microphone junction box , professional audio line cable, professional microphone cable , xlr connecter male and female, trs stereo connecter, professional on air studio light, digital clock with time , supply and fixing of work station table , supply and fixing of vob table , supply and fixing of discussion table l shape, supply and fixing of on air table and side table , supply and fixing of shoe rack , supply of low frequency acoustic treatment , supply of acoustic treatment , teak board skirting , supply of observation window2 , supply of sound proof door with frame chaukhatt, supply of executive chairs revolving, standard, supply of visitor chairs revolving, standard, t.v 56 inch standard led type ips panel, sitc of vrv vrf 10.0 hp odu , sitc of cassettee

Central Government/Public Sector

TRN :35749424 | 18 Nov, 2025

Tender Value : 0

Jhansi - Uttar Pradesh

Tender for supply of cast steel wedgefor nested springs for light weight low height 25t axle load b ogie lwlh25 of boxns wagon to rdso drg. no. wd-13012-s-06, alt-nil, item no.1, conforming to rdso specification no. wd-40- lwlh25 bogie k- class-2015 rev.

Central Government/Public Sector

TRN :35753319 | 19 Nov, 2025

Tender Value : 13.78 Lacs

Mundra - Gujarat

Tender for gem bids for supply and installation of double arm pole , supply and installation of single arm pole , supply and installation of led street lights , supply and installation of garden bollard type pole and 15w led lantern , supply and installation of 100w colour flood light , supply and installation of 50w flood light , supply and installation of 1.5 sq.mm x 3c armoured cable , supply and installation of electrical pole junction box , supply and installation of 30a, 6 way close type connector , supply and installation of 6a, 240v single pole mcb , supply and fabrication of copper clamp by using 25x3mm copper strip , supply and installation of 1. 5sq.mmx3c pvc insulated and sheathed coper flexible cable , supply and installation of 25 mm pvc pipe , supply and installation of 10a, 2p, mcb in power house , supply and installation of 6 way mcb distribution board , supply and installation of 25mm steel wire reinforced pvc flexible pipe , supply and laying of 50mm upvc pipe for road crossing , supply and installation of miscellaneous items , labour charges for excavation of cable trench , excavation for pole foundation , construction of footing structure , applying cement primer , applying signal red paint , applying metal primer , applying aluminium paint , demolishing of existing 29 footing structure , labour charges for laying of pipes in road crossings and ug cable markings with red colour bricks , supply and installation of 2m modular switch board box with matching frame plate and cover plate , supply and installation of 3m modular switch board box with matching frame plate and cover plate , supply and installation of 4m modular switch board box with matching frame plate and cover plate , supply and installation of 6m modular switch board box with matching frame plate and cover plate , supply and installation of 8m modular switch board box with matching frame plate and cover plate , supplying and fixing 6a modular switch and socket on the existing modular plate and switch box including connections , supplying and fixing 3 pin 6a modular socket outlet, on the existing modular plate and switch box including connections , supplying and fixing 16a modular switch on the existing modular plate and switch box including connections , supplying and fixing 6 pin 16 modular socket on the existing modular plate and switch box including connections , supply and installation of 16a universal extension board , supply and installation of 1m modular electronics fan regulator , supply and installation of 4 way spn db with earth connection. , supply and fixing 6a mcb , supply of 300mm pvc dom exhaust fan for installation in power house in the existing opening , installation of 300mm exhaust fan , extra carpentry work including supply and fixation of 19mm plywood on the exiting and ss net fixation at the outer side of opening , supply and installation of 12w, round surface led light , supply and fixing modular angle holder , supply and installation of self ballasted 20w led lamp , supply of 1200mm ceiling fan , installation testing and commissioning of ceiling fan , supply and installation of rotational adjustable pvc street light wall mount stand , supply and installation of led street light 25w,230v,50hz ac inbuilt with surge protection circuit , supply and installation of single phase 230v ac, 2hp monoblock pump , supply and installation of single phase 230v ac, 2hp motor starter , supply and installation of 6.5kg or higher front load, fully automatic washing machine , supply and installation of washing machine trolly stand , supply and installation of good quality of gate light on main gate pillar , supply of domestic clothing iron , supply of good quality nylon flexible pipe for gardening purpose , long solar panel cleaning brush kit heavy duty , gi mounting arm with clamps for installation led street light , supply of pvc suction hose and other items as per atc clause 7.1

Related Searched Keywords : load box

List of load-box Tenders

Tender for supplying, stacking and loading into railway ed wagons/boxes/hoppers stone querry dust/boulders and unloading at makronia /girwar /patharia /damoh /ghatera/sagoni / any where in bina-katni section.

Tender for supply of cast steel wedgefor nested springs for light weight low height 25t axle load b ogie lwlh25 of boxns wagon to rdso drg. no. wd-13012-s-06, alt-nil, item no.1, conforming to rdso specification no. wd-40- lwlh25 bogie k- class-2015 rev.

Get load box Tender Alert...

Related Searched Keywords : load box

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us