Filters

List of line-bearing Tenders

List of latest line-bearing Tenders in Indian Tenders. Click on any line-bearing Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for line-bearing Tenders.

All-Tenders (58)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government And Public Sector

TRN :35067050 | 29 Aug, 2025

Tender Value : 28.63 Lacs

Jaipur - Rajasthan

Tender for gem bids for call, visit charges to attend fault of dea set general servicingof the up to 20 kva dea sets general servicing of morethan 20 kva and upto 325 kva dea sets generalservicing of more than 325 kva and up to 55 kva dea sets replacement of diesel filter element set 1 ltr replacement of oil filter element 1 by 2 ltr replacementof oil filter element 1 ltr replacement of diesel filterelement set 1 by 2 ltr replacement of oil filter setsuitable for ea set of 50 to 55 kva replacement oflubricating oil multi grade 20w40 replacement of steelwire braided fuel pipe line replacement of stop solenoid12 volt replacement of starting key with switch replacement of mechanical type rpm cum hr meter replacement of mechanical type rpm cum hr meter chain replacement of battery leads red and black replacementof coolant for radiator of superior quality replacement ofv belt replacement of hose pipe set with clips replacement of techo drive unit replacement of fuelfeed pump assembly replacement of solid state smps orscr based battery chargers replacement of push buttonswitch for start or stop or reset replacement of 12 v dcor 220 v ac hr meter counter type supply and fixing of12 volt battery operated self starter supplying and fixing of12 volt battery charging alternator repairing of 12 voltbattery charging alternator repairing and generalservicing of the existing faulty radiator up to 55 kva pdggeneral servicing and repairing of 12 volts engine startingself dismentalling of existing up to 20 kva dea sets dismentalling of existing more than 20 kva and upto 55kva dea sets extra for shifting of existing dea set up to 20kva loading of existing up to 20 kva dea sets loading ofexisting more than 20 kva and upto 55 kva dea sets transportation of up to 20 kva dea sets transportation of bid number gem2025b6537807 dated 06-08-2025 bid document1 65 1 1 more than 20 kva and upto 55 kva dea sets, unloadingup to 20 kva dea sets, unloading more than 20 kva andupto 55 kva dea, itc of up to 20 kva dea sets on existingfoundation, itc of more than 20 kva and upto 55 kva dea, labour charges for top overhauling of existing dea setsup to 20 kva, replacement of the liner assembly withrubber ring dea sets up to 20 kva, replacement of thepiston set without piston ring set dea sets up to 20 kva, replacement of the piston ring set dea sets up to 20 kva, replacement of the set of gasket including head gasketdea sets up to 20 kva, replacement of the o ring set deasets up to 20 kva, replacement of the cr bearing dea setsup to 20 kva, replacement of the main bearing dea sets upto 20 kva, replacement of the oil pressure guage dea setsup to 20 kva, replacement of the front oil seal of crankshaft dea sets up to 20 kva, replacement of the back oilseal of crank shaft dea sets up to 20 kva, labour chargesfor top overhauling of more than 20 kva and upto 55 kva, replacement of the liner assembly with rubber ring deasets more than 20 kva and upto 55 kva, replacement ofthe piston set without piston ring set dea sets more than20 kva and upto 55 kva, replacement of the piston ringset dea sets more than 20 kva and upto 55 kva, replacement of the set of gasket and head gasket deasets more than 20 kva and upto 55 kva, replacement ofthe o ring set dea sets more than 20 kva and upto 55 kva, replacement of the cr bearing dea sets more than 20kva and upto 55 kva, replacement of the main bearingdea setsmore than 20 kva and upto 55 kva, replacementof the oil pressure guage dea sets more than 20 kva andupto 55 kva, replacement of the front oil seal of crankshaft dea sets more than 20 kva and upto 55 kva, replacement of the back oil seal of crank shaft dea setsmore than 20 kva and upto 55 kva, repairing of cylinderhead, repairing of up to 20 kva dea sets crank shaft, repairing of more than 20 kva and upto 55 kva dea setscrank shaft, transportation charges up to 50 km for alternator up to 55 kva, transportation charges more than51 to 100 km for alternator up to 55 kva, rewinding ofmain stator winding of alternator up to 20 kva, rewindingof main rotor winding of alternator up to 20 kva, rewinding of main stator winding of alternator more than 20kva and upto 55 kva, rewinding of main rotor winding ofalternator more than 20 kva and upto 55 kva, exciterstator winding of alternator up to 55 kva, exciter rotorwinding of alternator up to 55 kva, replacement orrepairing of avr, replacement or repairing of power diodefor rotating rectifier assembly, replacement or repairing of bearing suitable for above 20 kva alternator, providing of 2 core 16 sqmm, providing of 4 core 16 sqmm, laying of one number upto 35 sq. mm on wall surface, laying ofone number upto 35 sq. mm direct in ground, laying of onenumber upto 35 sq. mmin the existing rcc or hume ormetal pipe, supply and making end termination for 2 x 10sq. mm 19 mm, supply and making end termination for 4 x16 sq. mm 28 mm, providing and fixing 6 swg dia g.i. wire, sitc of 32 amps four pole on load side handle operated change over switch, sitc of 63 amps 2 pole on load side handle operated change over switch, sitc of 63 amps fourpole on load side handle operated change over switch, providing and fixing 63 amp tpn disconnector fuse switch unit

Central Government/Public Sector

TRN :35069070 | 16 Aug, 2025

Tender Value : 0

Jorhat - Assam

Tender for gem bids for microbial fuel test kit q3 * * % % 2 32 3 /mse exemption for years of experienceand turnoveryes | complete& % & % * * % % 2 2 / startup exemption for years ofexperience and turnoveryes | complete 6 6 & & /document requiredfrom sellerexperience criteria, past performance, bidderturnover, certificate requested in atc*in case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer8 8 : : ; ; < < & : & : : : < < ? ?? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in -- c c d d 6 6 e e / minimum number ofbids required to disable automatic bidextension2< :< : e e, , h h -- / / number of days for which bidwould be auto--extended7 e /bid number: gem/2025/b/6539601< /dated: 06-08-2025 & & / bid document1 / 5 2 % 2 % /past performance10 % p %p % <6 <6 < < /bid to ra enabledno 2 2 /type of bidtwo packet bid q q & s & s /time allowed for technicalclarifications during technical evaluation2 days t t c c u u t t 2 2 / % % : : ; ; /inspection required byempanelled inspection authority / agenciespre-registered with gemno q q u u /evaluation methodtotal value wise evaluation x & x & /arbitration clauseno /mediation clauseno //bid details /emd detail c /requiredno /epbg detail c /requiredno /splitting < / bid splitting not applied. /mii purchase preference /mii purchase preferenceno /mse purchase preference /mse purchase preferenceyes1. if the bidder is a micro or small enterprise as per latest orders issued by ministry of msme, the bidder shall beexempted from the eligibility criteria of experience criteria as defined above subject to meeting of quality andtechnical specifications. the bidder seeking exemption from experience criteria, shall upload the supportingdocuments to prove his eligibility for exemption.2. if the bidder is a micro or small enterprise mse as per latest orders issued by ministry of msme, the bidder2 / 5 shall be exempted from the eligibility criteria of bidder turnover as defined above subject to meeting of qualityand technical specifications. if the bidder itself is mse oem of the offered products, it would be exempted fromthe oem average turnover criteria also subject to meeting of quality and technical specifications. the bidderseeking exemption from turnover, shall upload the supporting documents to prove his eligibility for exemption.3. if the bidder is a dpiit registered startup, the bidder shall be exempted from the the eligibility criteria ofexperience criteria as defined above subject to their meeting of quality and technical specifications. the bidderseeking exemption from experience criteria, shall upload the supporting documents to prove his eligibility forexemption.4. if the bidder is a dpiit registered startup, the bidder shall be exempted from the the eligibility criteria ofbidder turnover as defined above subject to their meeting of quality and technical specifications. if the bidderis dpiit registered oem of the offered products, it would be exempted from the oem average turnover criteriaalso subject to meeting of quality and technical specifications. the bidder seeking exemption from turnover shallupload the supporting documents to prove his eligibility for exemption. 5. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 6. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. 7. past performance: the bidder or its oem themselves or through re-sellers should have supplied same or

Central Government/Public Sector

TRN :35069697 | 26 Aug, 2025

Tender Value : 66.68 Lacs

Hyderabad - Telangana

Tender for gem bids for line interactive ups with avr v2 q2, entry and midlevel desktop computer q2, professional large formatdisplay q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellerpast performance, certificate requested in atc, oemauthorization certificate*in case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?no -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension1 d /bid number: gem/2025/b/6533420; /dated: 05-08-2025 & & / bid document1 / 15 ; 9; 9 d d, , l l -- / / number of days for which bidwould be auto--extended7 4 % 4 % /past performance20 % n %n % ;5 ;5 ; ; /bid to ra enabledno 4 4 /type of bidtwo packet bid4 4 q q /primary product categoryentry and mid level desktop computer r r & t & t /time allowed for technicalclarifications during technical evaluation2 days u u b b v v u u 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno r r /estimated bid value6668404 r r v v /evaluation methodtotal value wise evaluation x & x & /arbitration clauseno /mediation clauseno //bid details /emd detail > /advisory bankstate bank of india /emd amount133370 /epbg detail > /advisory bankstate bank of india 4 %/epbg percentage%5.00 b /duration of epbgrequired months.40a. . % & 4& % & % 4 > \ n 9 /emd exemption: the bidder seeking emd exemption, must submit the valid supporting documentfor the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods andservice providers for services are eligible for exemption from emd. traders are excluded from the purview of thispolicy.b. , , u < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. 2 / 15 /beneficiary : sr.dfm/hybhyderabad bhavan, opp rail nilayam, secunderabad, telanagana-500025sr. divisional finance manager/hyderabad divisionuin number nctgc2415p /splitting ; / bid splitting not applied. /mii purchase preference /mii purchase preferenceyes /mse purchase preference /mse purchase preferenceyes1. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 2. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 3. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount and3 / 15 for determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. 4. past performance: the bidder or its oem themselves or through re-sellers should have supplied same or

Central Government And Public Sector

TRN :35048230 | 18 Aug, 2025

Tender Value : 0

Raipur - Chhattisgarh

Tender for gem bids for foam mattress v3 q3 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellerpast performance, certificate requested in atc, oemauthorization certificate*in case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension1; 9; 9 d d, , g g -- / / number of days for which bidwould be auto--extended7 d /bid number: gem/2025/b/6532769; /dated: 05-08-2025 & & / bid document1 / 8 4 % 4 % /past performance20 % n %n % ;5 ;5 ; ; /bid to ra enabledno 4 4 /type of bidsingle packet bid o o & q & q /time allowed for technicalclarifications during technical evaluation2 days r r b b s s r r 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemyesinspection to be carried out by buyers ownempanelled agencyyestype of inspectionpre dispatchname of the empanelled inspectionagency/ authorityrites o o s s /evaluation methodtotal value wise evaluation v & v & /arbitration clauseno /mediation clauseno //bid details /emd detail b /requiredno /epbg detail b /requiredno /splitting ; / bid splitting not applied. /mii purchase preference /mii purchase preferenceyes /mse purchase preference /mse purchase preferenceyes2 / 8 . preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 2. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 3. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. 4. past performance: the bidder or its oem themselves or through re-sellers should have supplied same or

Central Government/Public Sector

TRN :35050184 | 11 Aug, 2025

Tender Value : 29.08 Lacs

Baramulla - Jammu And Kashmir

Tender for gem bids for str, quick setting compound , supply only approved adhesive 0.5 per by weight of cement mixed up pcc all as specified and as per manufacturers instructions , natural manufatured sand , aggregate 5 to 8mm. , aggregate 20mm. stone aggregate to be crushed rock or gravel 20mm graded conforming to , aggregate 40mm. , stone boulder 150 200mm unweathered naturally occuring angular , dressed stone of size width and height 150mm to 250mm and length 400 mm to 750mm ready to use for stone masonary. , ms tmt bars 12 mm dia conforming to is 1786 , ms binding wire annealed not less than 0.9mm dia , gabion baskets of size 3.0 m x1.00m x 1.00m h , load bearing concrete solid blocks of size 400mm x 200 mm x 200 mm casted in design mix , rcc hume pipe single collar np 03 class , pvc swr pipe single socketed with rubber ring 110mm dia and 3 mtr long , cement base paint. make duracem snowcem and british xtracem , the pre cast concrete u drain with size 500mm x 250mm x 375mm thickness , brick trowel steel 305 mm with handle. , plaster trowel with hard wooden handle isi marked. , galvanised iron pan mortar tasla 16 gauge 16 inch dia minimum weight of 1.5 kg, , showel square nose 14 gauge tata high carbon steel , brick hammer 1.2kgs , mason trowel karchi , picks axes with chiesel and point ends kudali 14 cp nominal weight 3.0 kg overall length minimum 595 mm with hard wooden handle. , phowrah with hard wooden handles with min weight 2.00 kgs , crowbar 25mm 5 feet long , rammer with wooden handle of wt 5 10 lbs , aluminum spirit level 6 inc , brick line , industrial safety helmet ratcht colour orange yellow type.. , spectacles, frameless with 99.9 per uv protected scratcfh and impact resistant polycarbonate clear lens. , hand glove pairs having hppe cut 4 liner 13 gauge with black pu coating. , reflective vest. make shelcom melcom akiton. , rain poncho camouflage pattern. , mega phone am215m. , gum boot. make hilson velsafe wth.

Central Government/Public Sector

TRN :35052867 | 26 Aug, 2025

Tender Value : 11.42 Lacs

Ganjam - Orissa

Tender for gem bids for supply, support pipe top, strainer, o ring for casing back cover, key for muff coupling, key for coupling, key for impeller, lock washer, lock nut lh, int bearing sleeve, pumpbearing sleeve, pump bearing bush, int bearing bush, intbearing bracket, bearing spacer, bearing cover, bearingcartridge, thrust bearing, spit collar, muff coupling, impeller lock washer, impeller nut, impeller, gasket, lubrication pipe line

Central Government/Public Sector

TRN :35055567 | 21 Aug, 2025

Tender Value : 0

Malda - West Bengal

Tender for procurement of pit line bearing plate & fittings..

Central Government/Public Sector

TRN :35057552 | 19 Aug, 2025

Tender Value : 70.5 Thousand

Baramulla - Jammu And Kashmir

Tender for gem bids for wiper blade 20, suspension bush, lamp 24v 75 70w, foglight assy 12v, door lock rh, gear lever rep kit, knuckle bearing, strainer fuel, sleeve cyl assy, terminalpositive, terminal negative, brg tapered roller, diaclutch assy, pressure plate, clutch rel brg, air pipe linesteel

corporations/Associations/Others

TRN :35058594 | 27 Aug, 2025

Tender Value : 11.63 Lacs

Ganjam - Orissa

Tender for gem bids for supply, clamp bolt with 1-nut, part no - c012me62, shaft sleeve, part no - c075c21, seal ring, part no - c122r11, discharge joint ring, part no - c2132ls01, intake joint ring, part no - c2060s01, volute frame seal, part no - c2125s01, frame plate liner insert, part no - c2041a05, volute liner, part no - c2110a05, shaft spacer, part no - c117c21, impeller, part no - c2147a05, piston ring, part no -c108g02, stuffing box, part no - c078g01, clamp washer, part no - c011e63, frame plate stud with two nuts, part no- c039me63, frame plate liner stud with two nuts, part no -m10z3552l, cover plate, part no - c2013g01, adjustingscrew with 3 nuts and 02 washer, part no - c001me62, shaft sleeve o-ring, part no - c109s10, frame plate, partno - c2032hs1g01, impeller o-ring, part no - c217s10, lantern restrictor, part no - c118c23, gland - 2 piece, partno - c044c23, gland bolt 1 nut, 1 washer, part no -c045mc23, packing, part no - c111q05, labrinth locknut, part no - c061e62, grease retainer, part no - c046d21, labrinth, part no - c06210d81, shim set, part no - c025p10, bearing seal, part no - c08910s10

Central Government/Public Sector

TRN :35059026 | 16 Aug, 2025

Tender Value : 0

Pune - Maharashtra

Tender for gem bids for suspension kit, synchronizer ring, strg ignition switch, brake shoe, sliding pad, synchronizer kit, cyl assy masterwith booster, clutch release bearing, timing belt, clutchdisc, gasket set, sealing ring, assy line shoe set, frontbrake pad, water pump assy, upper ball joint, lower balljoint, crank oil seal

Related Searched Keywords : line bearing

List of line-bearing Tenders

Tender for procurement of pit line bearing plate & fittings..

Tender for gem bids for wiper blade 20, suspension bush, lamp 24v 75 70w, foglight assy 12v, door lock rh, gear lever rep kit, knuckle bearing, strainer fuel, sleeve cyl assy, terminalpositive, terminal negative, brg tapered roller, diaclutch assy, pressure plate, clutch rel brg, air pipe linesteel

Get line bearing Tender Alert...

Related Searched Keywords : line bearing

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us