Filters

List of isolation-box Tenders

List of latest isolation-box Tenders in Indian Tenders. Click on any isolation-box Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for isolation-box Tenders.

All-Tenders (18)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

Central Government/Public Sector

TRN :35755911 | 20 Nov, 2025

Tender Value : 18.43 Lacs

Hyderabad - Telangana

Tender for gem bids for molecular, k2edta vaccum tubes, yellow gel tubes, nyocard hba1c, g bioscience crp coated elisa kit, tarsons tips, tarsonstips, 300ul tarsons tips, tissue rolls, takara pcr mastermix, human il 6 elisa kit precoated, paxgene blood rnatubes, paxgene blood rna isolation kit, humangrehlinenzyme elisa, human gstp1 elisa, thermoscientific fast digest a1w26i, qiaamp dna micro kit, replig mitochondrial dna kit, rf system pack kit, crp systempack kit, falcons, quantitative reverse transcription kit, human pgc 1 alpha elisa kit coated uncoated, humanampk elisa kit coated uncoated, human sirt 4elisa kitcoated uncoated, human dnm1l elisa kit coateduncoated, human pink1 elisa kit coated uncoated, human nmt1 elisa kit coated uncoated, esr black vaccumtubes, bd needles, human ige elisa kit coated uncoated, human il 4 elisa kit coated uncoated, human eosinophilelisa kitcoated uncoated, huaman periostin elisa kitcoated uncoated, blood rna isolation kit, dna ladder, tpvg, disposable hijama cups, surgical blades, adhesivesurgical paper tape, disposable bed shets, bin covers, sterile fugical hand gloves, cupping therapy pump gun, betadine solution, cotton, spirit, bandage, disposablesurgical gowns, disposable skull cap, b p instrumentmercury, stethoscope, glucometer, pulse oximeter, acimassage bed or hijama table, immunotag human cxcl9elisa kit 96t, immunotag human cxcl0 elisa kit 96t, immunotag human il 17 elisa kit 96t, immunotag humanil 33 elisa kit 96t, immunotag human s100b elisa kit96t, immunotag human tyrosinase elisa kit 96t, immunotag human soluble cd25 elisa kit 96t, immunotaghuman ifn gamma elisa kit 96t, ependorf single channelpipette, tip box, tips /bid number: gem/2025/b/6835575* /dated: 30-10-2025 & & / bid document1 / 51

Central Government/Public Sector

TRN :35629236 | 04 Nov, 2025

Tender Value : 0

Lucknow - Uttar Pradesh

Tender for gem bids for data extraction tool for ios based mobile devices, data extractiontool for android based mobile devices, data extraction tool formobile application, data imaging and cloning tool for computerfile types, data imaging and cloning tool for computer file system, forensic duplicator/imager for offline system, forensicduplicator/imager for running system, isolation box

corporations/Associations/Others

TRN :35764175 | 10 Nov, 2025

Tender Value : 0

Gandhi Nagar - Gujarat

Tender for gem bids for side mounted magnetic level indicator, sidemounted level switch, 4 way valve flange size, flppressure switch 6 kg, flp pressure switch 16 kg, flptemperature switch, auto changeover unit and pneumaticassembly, ss tubbing and fittings, flp control paneltripping annuciation, flp hooter flp, m s stand, lpgcompressor, installation of lpg compressor, installationof panel, level indicator,

Central Government/Public Sector

TRN :35767992 | 11 Nov, 2025

Tender Value : 0

East Sikkim - Sikkim

Tender for gem bids for portable fire extinguishers v2 isi marked to is 15683 q2, galvanized mild steel fire bucket fire suppressionhand tools as per is 2546 q3, fire hooks firesuppression hand tools q3, fire beaters fire suppressionhand tools q3, fire hooter, portable fire extinguishers, fabricated fire point, abc trolley type fire extinguishermechanical foam, abc trolley type fire extinguisher drypower

Central Government/Public Sector

TRN :35769226 | 10 Nov, 2025

Tender Value : 0

Kolkata - West Bengal

Tender for gem bids for relays, flasher hooter relay unit auto telephone mainequipment flasher hooter relay unit.part no-28-rl230 2020-29 mc-830614000032, certificate ofconformity-1, certificate of warranty-1, certificate ofconformity-2, certificate of warranty-2

corporations/Associations/Others

TRN :35722139 | 17 Nov, 2025

Tender Value : 0

Vadodara - Gujarat

Tender for gem bids for 1 hexagonal bari crow bar as per bid specification, rail dolly as per bid specification, banner flag asper bid specification, hs flag as per bidspecification, safety jacket as per bid specification, safety helmet as per bid specification, safety shoeas per bid specification, gum boot as per bidspecification, rain suit as per bid specification, umbrella as per bid specification, tricolor torchas per bid specification, dragon torch as per bidspecification, key man bag as per bid specification, steel whistle as per bid specification, adjustablespanner as per bid specification, fish bolt spanneras per bid specification, plate screw tubularspanner as per bid specification, joggled fish plateas per bid specification, fish plate 1 mtr long as perbid specification, anti sabotage device as per bidspecification, anti sabotage device key as per bidspecification, c clamp as per bid specification, aluminum ladder as per bid specification, patrolman stick as per bid specification, clipapplicator as per bid specification, right angle asper bid specification, magnetic rail thermometer asper bid specification, track jack mechanical as perbid specification, material trolley as per bidspecification, steel sections cutting equipment asper bid specification, acd male as per bidspecification, acd female as per bid specification, railway track curves etc. grease as per bidspecification, grease gun as per bid specification, tamping tools as per bid specification, electric arcwelding machine as per bid specification, generator as per bid specification, portable dcwelding generator as per bid specification, inflatable emergency tower light as per bidspecification, measuring tape as per bidspecification, number plate as per bid specification, remote controlled gang hooter as per bidspecification, safety goggles as per bidspecification, keying hammer as per bidspecification, destressing roller as per bidspecification, ambient temprature thermometer asper bid specification, breathe analyzer as per bidspecification, inspection cum chipping hammer asper bid specification, magnifying glass as per bidspecification, powrah spade as per bidspecification, rake ballast as per bid specification, pan mortar as per bid specification, lawn moveras per bid specification, chain saw as per bidspecification, tarpaulin as per bid specification, safety hand gloves as per bid specification, v beltas per bid specification, wire brush as per bidspecification, high precision gauge as per bidspecification, laser level as per bid specification, laser distance meter as per bid specification, digital toe load measuring device as per bidspecification, mono rail basket as per bidspecification

Central Government/Public Sector

TRN :35722985 | 13 Nov, 2025

Tender Value : 0

Mumbai - Maharashtra

Tender for supply of flasher light, strobe light with hooter.

Central Government/Public Sector

TRN :35723910 | 17 Nov, 2025

Tender Value : 0

Mumbai - Maharashtra

Tender for supply of hooter with strobe.

Central Government And Public Sector

TRN :35725984 | 10 Nov, 2025

Tender Value : 4.94 Lacs

Thrissur - Kerala

Tender for gem bids for supplying and fixing of vertical type, mcb distribution board, supplying and fixing 5 a to 32 a rating, mcb single pole, supplying and fixing 5 a to 32 a rating, mcb tripple pole, supplying and fixing 4 pole 63 amps isolator, supplying andfixing of pvc conduit 20 mm, supplying and fixing of pvcconduit 25 mm, supplying and drawing of frls coppercable 3x1.5 sq. mm, supplying and drawing of frls coppercable 3x2.5 sq. mm, supplying and drawing of frls coppercable 3x4 sq. mm, supplying and drawing of frls coppercable 3x 6 sq. mm, supplying and making end terminationwith brass compression gland 3 .5 x 25 sq. mm, supplyingand making end termination with brass compression gland3.5 x 35 sq. mm, supplying and making end terminationwith brass compression gland 3.5 x 50 sq. mm, providingand fixing 6 swg dia g.l. wire, wiring for light point, fanpoint, exhaust fan point, call bell point with 1.5 sq.mmcopper conductor cable group c, supplying and fixingmodular switch socket 5, 6 a switch, supplying and fixingmodular switch socket 3 pin 5, 6 a socket outlet, supplyingand fixing modular switch, socket 15, 16 a switch, supplying and fixing modular switch socket 6 pin 15, 16 asocket outlet, supplying and fixing modules, gl box 3module 100mmx75mm, supplying and making endtermination with brass compression gland 2 x 1.5 sq. mm, dismantling of pvc insulated and pvc sheathed xlpe powercable up to 6 sq. mm, dismantling pvc insulated and pvcsheathed xlpe power cable above 6 sqmm up to 35 sq. mm, dismantling of pvc insulated and pvc sheathed xlpepower cable above 35 sq. mm and up to 95 sq. mm, relaying and refixing of pvc insulated and pvc sheathedxlpe power cable up to 6 sq. mm, relaying and refixing ofpvc insulated and pvc sheathed xlpe power cable above 6sqmm up to 35 sq. mm, relaying and refixing of pvc /bid number: gem/2025/b/6827905* /dated: 27-10-2025 & & / bid document1 / 47 insulated and pvc sheathed xlpe power cable above 35 sq.mm and up to 95 sq. mm, supply and fixing of pedestalmounting type kseb energy meter board, supplying anddrawing 25 sqmm abc aluminium weather proof cable, dismantling 125 amps capacity 4 pole on load change overswitch with ms enclosure, dismantling the existing afdpanel repeater panels, dismantling the existing old125amps capacity lt panel, dismantling the existing scmeter panel, dismantling the existing tpn mcb db, dismantling smoke detectors or mcp or hooter ri etc withaccessories, dismantling the existing life expired unservceable ac stabilser panel, reinstalling the existing 125a, 4 pole on load change over switch, reinstalling theexisting afd panel, reinstalling the existing kseb serviceconnection meter panel, reinstalling the existing tpn mcbdb, dismantling electrical wiring in metal pvc conduits forac units, wirings, dismantling electrical wiring in metal pvcconduits for ei light power plugs, relaying existingelectrical wiring in metal pvc conduits, transportation ofthe dismantled electrical installation accessories within15km distance, rearranging isolating the existingterminations, supply and fixing 63 amps capacity 4 wayconnector, supply installation, testing and commissioningof pre-wired, bulk head light fitting, supplying and fixing of63 amps capacity 4 pole on load change over switch, supply and fixing 2 inch dia rigid pvc pipe, supply andfixing suitable pvc coated gi stay wire, providing framework with 40 mm x 40 mm x 5 mm ms angle iron, providingframe work with 25 x 25 x 3 mm thick ms angle iron, providing frame work with 40 mm x 5 mm ms flat iron, providing frame work with 1 mm thick coated trafford gisheet, supply and fixing 63 amps 4 pole onload changeover switch

Related Searched Keywords : isolation box

List of isolation-box Tenders

Tender for gem bids for relays, flasher hooter relay unit auto telephone mainequipment flasher hooter relay unit.part no-28-rl230 2020-29 mc-830614000032, certificate ofconformity-1, certificate of warranty-1, certificate ofconformity-2, certificate of warranty-2

Tender for supply of flasher light, strobe light with hooter.

Tender for supply of hooter with strobe.

Get isolation box Tender Alert...

Related Searched Keywords : isolation box

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us