Filters

List of iron-panel Tenders

List of latest iron-panel Tenders in Indian Tenders. Click on any iron-panel Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for iron-panel Tenders.

All-Tenders (10)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :34907719 | 28 Jul, 2025

Tender Value : 9.53 Lacs

Asansol - West Bengal

Tender for erection of 14 fourteen nos. iron sheet ventilation stopping to provide adequate ventilation for proposed c.m caving panel b15b in r-vi seam of khottadih colliery, pandaveswar area

Central Government/Public Sector

TRN :34896334 | 31 Jul, 2025

Tender Value : 7.89 Lacs

East Khasi Hills - Meghalaya

Tender for gem bids for purchase, pbs roll terflet 1m wide and 20m long , plywood 12 mm thick 8ft x 4ft , pvc service tank 1000 ltrs capacity , ply wood 4ft x 8ft 4mm thick , ply wood 8ft x 4ft commercial oblique one side teak face size 4mm , oil emulsion distemper white , float valve 15mm plastic , indigo floor paint terracotta , super flash strip oblique bitumen tape size 2 inch , ply wood 8ft x 4ft commercial oblique one side teak face size 6mm , acrylic weather proof exterior emulsion appex white , pvc service tank 500 ltr , float valve 20mm plastic , paint se black , wooden planks 8inch x 1inch x 8ft teak wood , scantling wooden 3inch x 2inch x 8ft teak wood , plastic emulsion paint off white , thinner , paint red , plastic emulsion paint white , paint se sky blue , sprit per ltr , gi tee 1.5inch 15mm , e-board ceiling 4mm thick size 600 x 600mm armstorng , silicone sealant with gun clean colour , acrylic emulsion paint colour oxford blue , oil emulsion distemper off white , paint se green , paint white road marking , pvc pipe 50 mm dia length 3 mtr , oil putty kohinoor , gi tank nipple 15 mm x 300 mm long , varnish , paint olive green , tank cover 1000 ltr , pvc pipe 100 mm dia length 3 mtr , pvc pipe 75 mm dia length 3 mtr , synthetic resign adhesive fevicol , brush for paint 6inch , screw wood 15 mm , paint yellow , gi nipple dia 15 mm dia 150 mm length , indigo floor paint yellow , m seal water based , pgi sheet 22 gauge , gi elbow 1.5 inch 15mm , drill bit for iron5 pieces 4mm, 6mm, 8mm,10mm and 12mm , elbow pvc 75 mm dia , acrylic weather proof exterior emulsion appex green , screw wood 20 mm , aluminium paint 4ltr container , drill bit for wood work complete 3 pieces 4mm, 6mm and 8mm , tank cover 500 ltr , elbow pvc 100 mm dia , gi uniion 1.5 inch 15mm , elbow pvc 50 mm dia , brush for paint 4 inch , gi socket 15 mm dia , acrylic emulsion paint colour marble grey , screw wood 35 mm , screw wood 25 mm 100 nos per pkt , screw wood 75 oblique 80 mm , gi nipple 15 x 50 mm long , white cement in 1 kg pkt , tera cota , gi nipple 15 mm x 100 mm , drill bit for concrete set of 5 pcs , screw wood 40 mm , gi tank nipple 15mm , nails wire 2inch 50 mm , nails wire 1.5 inch 40 mm , brush for paint 2 inch , screw wood 25 mm , termite killer 500 ml container , nails wire 3inch 80 mm , nails wire 1inch 25 mm , gi socket 20 mm dia , nails wire 4inch 100 mm , wall care putty , rotary hammer masonary drill bit set of 3 pcs 25mm, 30mm and 40mm , panel pin 1 x 17 mm , hack saw blade , brush for paint 1 inch , gi plug 20mm , emery sheet abb cloth no 80 , gi nipple 15 mm x 75 mm , gi tank nipple 20mm , nails wire 2.5 inch 60 mm , nails 5 inch , nails 6 inch , gi plug 15mm

Central Government/Public Sector

TRN :34905053 | 12 Aug, 2025

Tender Value : 0

Amravati - Maharashtra

Tender for gem bids for electrical, providing and fixing 2 no 3pin 6 16a multi socket withsafety shutter and 16a switch and 2 nos 3pin 6a multisocket with safety shutter and 6a switch on independent 12module metallic coated surface supplying and erectingintegrated led flood light fitting max 120w ip65 and ik07class having pressure diecast aluminium housing havingsystem lumens output of min 14400 lumens min efficacy of120 supplying and erecting integrated led highbay fitting150w ip65 and ik08 class having die cast aluminiumhousing with polycarbonate diffuser with integrated opticshaving system lumens output of min 1 point wiring forhighbay lights with 3c 25 sqmm fr grade multistrandedcopper armoured cable erected using industrial typepressure patti or equivalent and required accessories as perspecificati secondary wiring for highbay lights with 3c 25sqmm fr grade multistranded copper armoured cableerected using industrial type pressure patti or equivalentand required accessories as per specifi 6a c curve 16a ccurve 20a c curve supplying erecting and markingtpmcb 25a cseries with rated short circuit breakingcapacity icn 10ka in provided distribution board as perspecification no swswr mcb supplying erecting andmarking tpmcb 32a cseries with rated short circuitbreaking capacity icn 10ka in provided distribution board asper specification no swswr mcb supplying erecting andmarking tpmcb 40a cseries with rated short circuitbreaking capacity icn 10ka in provided distribution board asper specification no swswrmcb supplying erecting andmarking fpmcb 40a cseries with rated short circuitbreaking capacity icn 10ka in provided distribution board asper specification no swswrmcb supplying erecting andcommissioning 4 pole rccb 63a electromagnetic type with300 ma sensitivity with earth leakage trip indication bid number gem2025b6481019 dated 22-07-2025 bid document1 34 0 0 complete as per specification no swrccbrccb, supplyingerecting and commissioning 2 pole rccb 40aelectromagnetic type with 100 ma sensitivity with earthleakage trip indication complete as per specification noswrccbrccb, supplying erecting and commissioning 2pole rccb 40a electromagnetic type with 300 masensitivity with earth leakage trip indication complete as perspecification no swrccbrccb, providing and erecting 4pole mccb 415 v 160a rated shortcircuit breaking capacity25 ka ics100 of icu adjustable thermal overload setting andfixed magnetic setting with provided leads, providing anderecting 4 pole mccb 415 v 100a rated shortcircuitbreaking capacity 25 ka ics100 of icu adjustable thermaloverload setting and fixed magnetic setting with providedleads spre, 4 way vtpn sptp og 4p ic mcb db legrandcat no 5077 25 with top and bottom cable end box, 4 wayvtpn sptp og 4p ic mccb db legrand cat no 5077 45 withtop and bottom cable end box, 6 way vtpn sptp og 4p icmccb db with top and bottom cable end box, 8 way vtpnsptp og and 4p ic mccb db with top and bottom cable endbox, 4 way tpn db having sp og and 4p mcb rccb ic withtop and bottom cable end box, supplying and erecting offabricated 3 phase 1 phase plug and socket tpn dbincorporating 63a 4p 100ma rccb as incomer outgoing as32 amp tp mcb 2 no 20 amp spmcb 4 nos duly erectedwith, supplying installation testing and commissioning thefollowing as a single vertical compartment of approx1800mm height as extension to existing panel contractor tosurvey and measure existing pan, shifting of existing 250kvar apfc panel from present location to adjacent roomalong with supply laying and end termination using dcglands of 35 core 240 sq mm al ar cable of 20 meters length, supplying installation testing and commissioning ofproposed main panel of new shed as per sld and providedtechnical specifications, supplying installation testing andcommissioning of power distribution panel as per sld andprovided technical specifications, supplying erecting andterminating fr xlpe insulated galvanised steel formed wirearmoured strip cable 1100 v 35 core 300 sq mm aluminiumconductor complete erected with glands and lugs on wall, supplying erecting and terminating fr xlpe insulatedgalvanised steel formed wire armoured strip cable 1100 v 4core 70 sq mm aluminium conductor complete erected withglands and lugs on wall tr, supplying erecting andterminating fr xlpe insulated galvanised steel formed wirearmoured strip cable 1100 v 4 core 35 sq mm aluminiumconductor complete erected with glands and lugs on wall, supplying erecting and terminating fr xlpe insulatedgalvanised steel formed wire armoured strip cable 1100 v 4core 25 sq mm aluminium conductor complete erected withglands and lugs on wall tru, supplying erecting andterminating fr xlpe insulated galvanised steel formed wirearmoured strip cable 1100 v 4 core 16 sq mm aluminiumconductor, supplying erecting and terminating fr xlpeinsulated galvanised steel formed wire armoured strip cable1100 v 3 core 25 sq mm, 35 core 300 sq mm aluminium, 4core 70 sq mm aluminium, 4 core 35 sq mm aluminium, 4core 25 sq mm aluminium, 4 core 16 sq mm aluminium, providing and erecting hot dipped galvanised ladder typecable tray manufactured from 16 swg 1.6 mm thick gisheet of 300mm width and 75mm height, supplying andfixing ms angle and iron supports for cable trays panels dbsetc including painting as per clients recommendation andfixing on wallroof etc, supplying and laying excluding //bid details2 / 34 excavation reinforced cement concrete pipe of is 4582003np2 class of 200 mm internal diameter in proper line leveland slope including providing and fixing collars i, makingtrench in hard murumtar road having 075 m depth andminimum 03mtr width as per is for laying provided cablesup to voltage level 11kv cable complete as per specificationno cwexnctr, supply of 8 mm aluminum roundconductor complete as specified in drawing and meets therequirements of is iec 62305, supply of roof conductorholder stainless steel conductor holder with bottom sectionand conductor holder stainless steel v2abottom sectionwith 85 mm slot conductor holder 1 meter distance, connector for t cross and parallel connectors quickinstallation using hexagonal bolt m10x30 highgrade hot dipgalvanised conforms to the requirements according to isiec62305 2nosexpansion pie, providing of expansion piecewith connector for equalising temperature related lengthchanges necessary on conductors length over 20 meters, supply of test joint suitable to connect 8mm roundconductor and max by 30x3 mm gi strip as specified indrawing and directed by engineer made, supply ofgalvanised iron flat 40x5 mm thickness for ring earthing asrequired flat conductor, providing of flat conductor holdersuitable for fl 30 installed with 2 hexagonal bolts, providing pipe earthing stations with 100mm dia 3 mtr longci pipe earth with 6mm perforations 20mm cc specified andshown on drawing as per is 3043 complete with excavationdisconnecting link arrang, supplying and erecting 8 swgcu earth conductor earthing or any other purposes on wallwith necessary gi clamps fixed on wallcable conduit withscrews complete, 25 x 5 mm hot dip galvanized earth flatcomplete with all accessories earth strip joint will be eitherfull welding type or else using double nut boltingelectroplated earth flat not allowed

State Government

TRN :34879079 | 07 Aug, 2025

Tender Value : 0

Thiruvallur - Tamil Nadu

Tender for gem bids for housing(ofb-defence), containerized housing / office unit, plummer block assembly, interactive panels with cpu, cast iron / ductile iron drainage pipe fittings for over ground non - pressure pipeline socket and spigot series as per is 1729, books (v2), cotton sewing threads- as per is : 1720, tennis ball, sealing wax (v2) as per is 868, personal safety kit reflective luminous garment

State Government

TRN :34880633 | 26 Jul, 2025

Tender Value : 2.05 Lacs

Purulia - West Bengal

Tender for installation of solar panel and iron filter at parbelia near ecl football ground under saltore gp within neturia panchayat samity.

Central Government And Public Sector

TRN :34849630 | 06 Aug, 2025

Tender Value : 0

Cuttack - Orissa

Tender for gem bids for chair, almirah, table, induction chullah, basin, weightmachine, foot step, patient trolly, fan, ups, computerset, bed, plastic stool, plastic chair, compressor, dressing trolley, wooden bed, printer, cooler, aqua guard, tv, dish top, camera, audiometer, ac, water cooler, coff machin, hand brush cutter, laptop, vice, vacuummachine, monitor, scanner, dg set 250kva, lift, dvdwriter, wireless router, biometric machine, control panel, transformer, radiator, pump, book case, cabinet, plasticbench, liebert emerson, traction unit, sliding calipermartin type, interferntial therapy, shortwave diathermy, infrared lamp floor, grip exerciser, peg board large, pyramid round, stimulator, bio feed back, ultrasoundelectroson, physio paraffin wax bath, arm leg ergometersystem, static cycle heavy duty, walker rolator junior, physio walker scissor, electrically operated tilt table, sliding seat, sliding transfer board, vestibules swingsystem, passive motion kinetic, physio arm chest exerciser, manipulative block, quadriceps exercise table, footexerciser, laser therapy unit, body former to body shape, vibrator electrical, refrigerator, vacuum cleaner, physiocuff weight, three point anaesthetiometer, wright peakflow meter, seat and reach test, multiplex rack 3 shelves, floor seater, board white marker, suite case vip, shoulderabduction ladder, physio hand exercise table, bone drillinghand piece, electric cast saw, c arm, aneasthesia machine, ot light, wire tensioner, handy cast saw, batteryoperated drill, blade circulator, brass iron, wire bendertwister, mayo scissor, t e scissor, plier heavy duty, canulated reamer, bholer stirrup medium, bholer stirruplarge, electro handle disposable, saline stand, instrumentsterilizer

Central Government/Public Sector

TRN :34853332 | 26 Jul, 2025

Tender Value : 0

Ramachandrapuram - Andhra Pradesh

Tender for gem bids for distribution, hy8442410066, 32 amps 3 phase dbs, hy8442350101, 16 amps single phase dbs, hy8442350110, 200 amps 3phase main ictp switch, hy8442410104, 100 amps3phase main ictp switch, hy8442420185, 63 amps3phase main ictp switch, hy8442410090, cramptontube light sets 20 watts, hy8442390022, floodlights 50 watts, hy8442390030, flood lights 150watts, hy8442420223, 1 20a socket and 1 switchmodular eb, hy8442350128, modular extensionboards, hy8442440240, anchor rider 18 moduleplates, hy8442410074, anchor rider 6 module plates, hy8442430199, anchor rider 3 module plates, hy8442420266, 20a b series sp mcb, dsmsbspf020, hy8442440259, industrial plug and socket panel, hy8442440267, ftc 32 amp 5 pin plug socket, hy8442440275, 5 amp 24v dc smps multispan ps24 5a, hy8442440283, 3 pin 8 socket industrial extn board, hy8442440291, fluke 115 true rms multimeter, hy8442440305, iron extn board two 16a socketswitches

Central Government/Public Sector

TRN :34841525 | 04 Aug, 2025

Tender Value : 40.00 Lacs

Chennai - Tamil Nadu

Tender for gem bids for scientific 70 0 0 2 2 binocular microscope oil immerison with light attached, pasteur pipette, monocular microscope with oil immersionwith light attached, bp apparatus, stethoscope, tonguedepressor, porcelain kalvam, thapthakalvam, distillationapparatus, moosai-crucible, aduppu-charcoal, brassvessel, copper vessels, dissection box, binocularmicroscope, bunsen burner, trataka stand, goniometer, yoga brick or block, yoga roller, yoga bolster, yoga mat, dissection table with drainer full size with steel top-55, stretcher with trolley full size steel-top, dissection sets foranatomy, x-ray viewing panel, bone cutter straight, bonehammer, bone chisel, brain knife, dissection forceps, hack saw frame with two blades, hematocrit tube, clinicalthermometer, knee hammer, tuning fork, stopwatches, centrifuge with speed control, torch, induction stove, male urinary catheterization simulator, female urinarycatheterization simulator, suture training simulator, episiotomy training simulator, lui training and copper-tinsertion training simulator, intravenous practice simulator, advanced maternity model, mixie, face steamer, measuring tape, height and weight measuring stand, proctoscope-medium, fistula probe, rectal speculum, autoclave sterilizer, shadow less lamp, lamp stand, boyles apparatus with anesthesia machine, ot table-headrise and low, abdominal retractor, uterine sound, bladdersound, sims vaginal speculum, cuscos vaginal speculum, stitching needle, emergency light, electric sterilizer, tireuniformity and dynamic balance test equipment, friabilitytest apparatus, blower, motorized calvam, ph meter, sieving mesh machine, disintegator, refrigerator, juicermixer grinder, iron mortar and pestle, kjheldahl system-digestion and distillation unit, digital muffle furnace, hotplate, soxhlet fat extraction system, vortex mixer, desiccator, digital colony counter, autoclave, magneticstirrer, abbes digital refractometer, flame photometer, hot air oven, water bath, grinder, digital ph meter, vacuum filter system, sonicator, fume hood, digitalrotational viscometer, refrigerated centrifuge, digitalpolarimeter, burette, glass pipette-packs, micropipette-different capacities- sets, heating mantle, compoundmicroscope, colony counter, staining tray or rack, anaerobic tray or rack, computer, multi-functional printer

State Government

TRN :34843231 | 30 Jul, 2025

Tender Value : 17.76 Lacs

Trivandrum - Kerala

Tender for gem bids for office chair v3 q2, steel shelving cabinets adjustabletype confirming to is 3312 v4 q3, metal beds v3 q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellercertificate requested in atc, oem authorizationcertificate, additional doc 1 requested in atc, additionaldoc 2 requested in atc, compliance of boq specificationand supporting documentin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?no -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension1 d /bid number: gem/2025/b/6405627; /dated: 15-07-2025 & & / bid document1 / 15 ; 9; 9 d d, , m m -- / / number of days for which bidwould be auto--extended7 o %o % ;5 ;5 ; ; /bid to ra enabledno 4 4 /type of bidtwo packet bid4 4 r r /primary product categoryoffice chair v3 s s & u & u /time allowed for technicalclarifications during technical evaluation2 days v v b b w w v v 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno s s /estimated bid value1776000 s s w w /evaluation methoditem wise evaluation/ y & y & /arbitration clauseno /mediation clauseno //bid details /emd detail b /requiredno /epbg detail > /advisory bankstate bank of india 4 %/epbg percentage%5.00 b /duration of epbgrequired months.38a. , , \ v < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. \ \ /beneficiary : director, sctimstsree chitra tirunal institute for medical sciences and technology sctimst, thiruvananthapuram, departmentof science and technology dst, ministry of science and technologydirector, sctimst /splitting2 / 15 ; / bid splitting not applied. /mii purchase preference /mii purchase preferenceyes /mse purchase preference /mse purchase preferenceyes1. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 2. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 3. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. s s s s / evaluation method item wise evaluation method contract will be awarded schedulewise and the determination of l1 will be done separately for each schedule.the details of item-consignee combination covered under each schedule are as under:3 / 15 s /evaluation schedules s /estimated value & / / item/category /quantityschedule 1208000office chair v332schedule 2800000steel shelving cabinets adjustable typeconfirming to is 3312 v432schedule 3768000metal beds v364office chair v3 32 pieces 5 5 1 2 & & % % % % ^ ^ < < % % 4 4 b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively u u /technical specifications u / as per gem category speci cation /speci cation u u /specificationname b b s s /bid requirementallowed valuesgeneralrequirementchair typenon-revolving and non-tilting chair with armrest, non-revolving and non-tilting chair without armrestunderstructurechair understructure typecantilever, legsunderstructure materialerw tube conforming to is : 1161 latest, aluminiumpipe hollow section conforming to is: 1285 latest, stainless steel ss 202, stainless steel ss 304, stainless steel ss 316, mild steel, solid woodthe shape of tubularsection of understructureround, square, rectangular, elliptical, nasection sizediameter/sides ofunderstructure19 mm, 22 mm, 25 mm, 30 mm, 19x19 mm, 25x25mm, 30x30 mm, 25x15 mm, 30x12 mm, 30x15 mm, 30x20 mm, 45x19 mm, 35x15 mm, 38x20 mm, naunderstructure wallthickness mm1, 1.2, 1.6, 2, 2.5, 3, na for woodcastoryes, noseatseat materialmoulded pu, pu foam, mesh, caned, hot pressedplywooddensity of pu used in seatkg per cubic meter< 30, >30< 40, >40< 50, >50, nathickness of pu used inseat mm< 30, >30< 40, >40< 50, >50, naminimum seat height fromfloor surface mm< 400, >400< 500, >500width of seat mm< 400, >400< 450, >450depth of seat mm< 400, >400< 450, >450seat upholstery materialmesh fabrics, polyester fabric, leatherette, leatherette with spacer fabric, leather, caned, moulded pu4 / 15 backrestbackrest base framematerialmild steel frame, hot pressed plywood, solid wood, injection moulded plasticbackrest materialmoulded pu, pu foam, mesh, caned, hot pressedplywooddensity of pu used inbackrest kg per cubicmeter< 30, >30< 40, >40< 50, >50, nathickness of pu used inbackrest mm< 30, >30< 40, >40< 50, >50, nawidth of backrest mm< 400, >400< 450, >450backrest height from theseat level> 350< 450, >450< 550, >550backrest upholsterymaterialmesh fabrics, polyester fabric, leatherette, leatherette with spacer fabric, leather, caned, moulded puarmrestarmrest typeoverhanging armrest, continuous armrest, mouldedarmrest continuously fitted with seat and back, moulded t armrest fitted with seat bottom, mouldedarmrest mounted to frame, without armrestarmrest movementadjustable, fixed, without armrestswarrantywarranty period in numberof years1, 2, 3, 4, 5 or higher year /speci cation u u /specificationname b b s s /bid requirementallowed valuesadditional specification parameters - office chair v3 32 pieces specification parameternamebid requirement allowed valuesremarksdetailed specification is included in buyer added bid specific atc. biddersshould submit declaration regarding the compliance of the specification.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; a o ; a /consignees/reporting officer and quantity5. .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1shiju v s695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, trivandrum3230steel shelving cabinets adjustable type confirming to is 3312 v4 32 pieces 5 / 15 5 5 1 2 & & % % % % ^ ^ < < % % 4 4 b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively u u /technical specifications* u / as per gem category speci cation /speci cation u u /specificationname b b s s /bid requirementallowed valuesstandards andcertificationsgoverning standardconformity to is 3312generictypes of shelving cabinetsdimensions are withoutpedestal heightsmall 1150 mm x 760 mm x 430 mm, large 1855mm x 910 mm x 480 mmavailability of drawersyes, noavailability of lockersyes, noadditional specification parameters - steel shelving cabinets adjustable type confirming to is3312 v4 32 pieces specification parameternamebid requirement allowed valuesremarksdetailed specification is included in buyer added bid specific atc. biddersshould submit declaration regarding the compliance of the specification.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; a o ; a /consignees/reporting officer and quantity5. .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1priya p695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, triavndrum3230metal beds v3 64 pieces 5 5 1 2 & & % % % % ^ ^ < < % % 4 4 b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively u u /technical specifications* u / as per gem category speci cation6 / 15 /speci cation u u /specificationname b b s s /bid requirementallowed valuesgenerictype of metal bedmetal bed, metal bed with headboard only, metal bedwith footboard only, metal bed with headboard andfootboard, metal bed with headboard, footboard andcanopysize category of metal bedsingle, double, queen size, king size, super king sizeoverall length of bed inmm1800 - 1850 mm, 1850 - 1900 mm, 1900 - 1950 mm, 1950 - 2000 mmoverall width of bed inmm750 - 900 mm 2.5 to 3 ft, 900 - 1050 mm 3 to 3.5ft, 1050 - 1200 mm 3.5 to 4 ft, 1200 - 1350 mm 4to 4.5 ft, 1350 - 1500 mm 4.5 to 5 ft, 1500 - 1650mm 5 to 5.4 ft, 1650 - 1800 mm 5.4 to 6 ft, 1800 -1950 mm 6 to 6.4 ft, 1950 - 2100 mm 6.4 to 6.9 ftoverall height of bed frominstallation level in mm150 - 200 mm, 200 - 250 mm, 250 - 300 mm, 300 -350 mm, 350 - 400 mm, 400 - 450 mm, 450 - 500mm, 500 - 550 mm, 550 - 600 mmavailability of headboardyes, noavailability of footboardyes, nometal bed framematerial of bed frameincluding legsmild steel, aluminium, wrought ironmetal bedmattress supportpaneltype of bed mattresssupporthorizontal beams only, vertical beams only, crossbeams - horizontal & vertical combomaterial of bed mattresssupport panelmild steel, aluminium, wrought ironmetal bedheadboardmaterial of bed headboardframemild steel, aluminium, wrought iron, nametal bedfootboardmaterial of bed footboardframemild steel, aluminium, wrought iron, naadditional specification parameters - metal beds v3 64 pieces specification parameternamebid requirement allowed valuesremarksdetailed specification is included in buyer added bid specific atc. biddersshould submit declaration regarding the compliance of the specification.* bidders offering must also comply with the additional specification parameters mentioned above. //o ; a o ; a /consignees/reporting officer and quantity7 / 15 . .5. ./s.no. //o ; a o ; a /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1shiju v s695011, sree chitra tirunalinstitute for medical scienceand technology, medicalcollege po, trivandrum6430special terms and conditions-version:1 effective from 25-06-2024 for category office chair v31. special terms and conditions1. the colours for the seat and back, are speci ed based on the procurement done by various buyerson gem. 2. sellers are advised to refrain from uploading any catalogue selecting image colour other than theoption chosen for the catalogue, as available in the category. any mismanagement of this will betreated seriously as per gem policies.3. in case buyer requires to buy any other colour not covered in the category, same may be speci edunder additional parameters while creating the bid. the colours mentioned in the additionalparameters by the buyer in the bid shall prevail over the colours indicated in the catalogue.4. sellers are advised to check the complete bid document while offering their prices.5 5 : : d d/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period theadditional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. genericbidder financial standing: the bidder should not be under liquidation, court receivership or similarproceedings, should not be bankrupt. bidder to upload undertaking to this effect with bid.3. genericbidders shall quote only those products part of service delivery in the bid which are not obsolete in themarket and has at least 7 years residual market life i.e. the offered product shall not be declared end-of-life by the oem before this period.4. certificatesbidders offer is liable to be rejected if they dont upload any of the certificates / documents sought in thebid document, atc and corrigendum if any.5. genericbidders are advised to check applicable gst on their own before quoting. buyer will not take any8 / 15 responsibility in this regards. gst reimbursement will be as per actuals or as per applicable rateswhichever is lower, subject to the maximum of quoted gst %.6. buyer added bid specific atcbuyer added text based atc clausesa. bidders are advised to quote prices as per technical specification and additional specification. bidders should not include price bid in the technical bid. the price format to be submitted along with financial bid only. if any of the price components disclosed in the technical bid, the bid will summarily be rejected and thebidder will be disqualified from further bidding process.b. bidders should submit the manufacturers authorization in attached format- a buyer uploaded atc documentc. liquidated damages:if the supplier fails to deliver or install/commission any or all the goods or fails to perform the services within the time frames incorporated in the purchase order, the purchaser shall, without prejudice to other rights and remedies available to the purchaser under the contract, deduct from the contract price, asliquidated damages, a sum equivalent to 0.5% per week of delay or part thereof on delayed supply of goods, installation, commissioning and/or services until actual delivery or performance subject to a maximum of 10 % of the contract price. once the maximum is reached purchaser may consider termination of the contract.if any delay by the supplier is maintained its contractual obligations towards delivery of goods andperformance of services shall render the supplier liable to any or all of the following sanctions:a. imposition of liquidated damages, b. forfeiture of its performance security andc. termination of the contract for defaultd. sctimst reserves the right to ask for a free demonstration of the quoted equipment/ items after giving reasonable time to the bidder at a pre-determined place acceptable to the purchaser or at a site in case of non-portable and heavy equipment for evaluating the technical compatibility as per the bidding documentspeci cations, professionalism and quality of work of the bidder for technically qualifying for opening the price bid. sctimst reserves the right to accept/ reject the bid based on the product/ site evaluation as stated above.1 2 door storage cupboards. indent no: 1 qty 32 supply & installation of 2 door cupboards the storage size should be 900w x 507d x 1950ht +/-1 mm. storage should be completely knock down construction. storage skirting should be removableand to cover integral legs and legs should be fitted with screw type leveller. storage should be made from combination of crca 0.8 mm & 0.6 mm thickness. storage door should be provided with steel hinge door. door lock should be 3-way 90 degree removable key type cam lock &locking mechanism and handle should be base aesthetically appealing, ergonomic, flush with door made from zinc alloy.9 / 15 one locker should be placed in the rh side of the storage with hinge door and 2-way cam lock with knob type handle top side full shelf should be fixed and adjustable half shelves 1 no on rh side of the storage & 2 no s on lh side of vertical partition. one number hanging rod should be provided on left half of partition below top shelf & another one on right half below locker both mounted on snap-ontype plastic brackets. storage nish should be epoxy powder coated to the thickness of 50 microns +/-10. product should be certified by bifma, greenguard, greenpro, aiota, and iaq2 cantilever chair. indent no.3 qty 32 supply &installation of non revolving chair the chair seat should be made of injection moulded in glass lled polypropylene compound which is upholstered with fabric upholstery covers and moulded polyurethane foam. the chair back should be injection moulded in glass lled polypropylene compound which is upholstered with mesh fabric seat size should be: 50 cm. d x48 cm. w back size should be: 53 cm. w x 39 cm. d the foam should be high-resilience polyurethane moulded with density 45+/-2 kg/m and hardness 16+/-2 kgf as per is: 7888 for 25% compression. chair under structure should be cantilever with powder coateddft 50 10 microns welded tubular main frame is made from 2.54 0.03 cm x 0.2 0.016cm and 1.9 0.3mm x 0.12 0.0096 cm with mild steel electric resistance welding tube. the armrest should be made of glass filled polypropylene compound andassembled over the tubular frame the chair shoes should be made of glass lled polypropylene compound with and pressed fitted with tubular frame. felt is provided below the shoes. 10 / 15 3 single bed with head and footboard. indent no.4 qty 64 supply & installation of single size metal bed. the bed size should be 2080w x 925d x 385 ht +/-1 mm. bed should be completely knock down construction with metal frame material. metal frame size should be mild steel pipe 25.4x 50.8 x 1.2 thk, mild steel pipe 19.05x 19.05 x 0.8 thk and angle 20x20x1.6 thk +/-0.1mm. bed should be provided with headboard & footboard bed nish should be epoxy powder coated to the thickness of 50 microns +/-10. product should be certi ed by bifma, green guard, green pro, aiota, and iaq additional terms and conditions1 the bidder participating in the tender should be an oem or an authorized dealer. upload manufacturer authorization: wherever authorized distributors are submitting the bid, manufacturers authorization form maf/certi cate withoem details shall also be uploaded.2 splitting up of bid items is not possible. bidder shall quote for all products mentioned in the bill of quantity. bidders o er is liable to be rejected if theydo not quote for all products mentioned in bill of quantity boq.3 bidder should upload speci cation and catalogues of the quoted products. bidder should provide the available colour options for the o ered chairs, lpsc reserves the right to choose the colours from the available options for the above items and the same will be mentioned in the p.o. 4 service escalation matrix of the bidder should be provided with o ce set up and warehouse details in kerala. registration certi cate also to be submitted as documentary evidence.5 the supplied products should be designed and tested as per bifma standards for comfort, safety, and durability.6 the bidder/oem should have manufacturing facility in india and they shall manufacture in accordance with iso 9001:2015, 14001:2015, 45001:2018 and 500o1:2018follow safety norms in accordance of ohsas7 the bidder/ oem should have green guard, aiota, iaq, green pro and griha certi cation for the o ered furniture which are in accordance with environment requirements and recognized under ministry of new and renewable energy.11 / 15 the bidder / oem themselves or through resellers, should have executed project for supply and installation / commissioning of same or

State Government

TRN :34772685 | 25 Jul, 2025

Tender Value : 0

Malkangiri - Orissa

Tender for gem bids for hydrometer, earth plate, ohm meter, milli voltmeter, ammeter mc analog, digital wattmeter, ac energy meter, frequency meter, magnetic flux meter, lux meter, tachometer, ac starters, soldering iron, temperaturecontrolled soldering iron, inverter with battery, dc powersupply, battery charger, current transformer, potentialtransformer, solar panel with battery, shaded pole motor, smart meter

Related Searched Keywords : iron panel

List of iron-panel Tenders

Tender for erection of 14 fourteen nos. iron sheet ventilation stopping to provide adequate ventilation for proposed c.m caving panel b15b in r-vi seam of khottadih colliery, pandaveswar area

Tender for installation of solar panel and iron filter at parbelia near ecl football ground under saltore gp within neturia panchayat samity.

Get iron panel Tender Alert...

Related Searched Keywords : iron panel

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us