Filters

List of iron-concentrate Tenders

List of latest iron-concentrate Tenders in Indian Tenders. Click on any iron-concentrate Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for iron-concentrate Tenders.

All-Tenders (3)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :49020045 | 14 May, 2025

Tender Value : 0

Belagavi - Karnataka

Tender for tender for rate contract supply of drugs items to bims belagavi - zince oxide 20gm cream,zinc syrup 60 ml,xylometazoline 0.1% nasal drops 10ml,white petrolium 100% pure jelly 500gm,white petrolium 100% pure jelly 30gm,wax solvent ear-drops 10ml benzocaine 2.7%w/v+chlorbutol5%w/v+paradichlorobenzene2%w/v+turpentine oil-15%w/v,vitamin-e drops 50mg/1ml-15 ml,vitamin-d3 60000 iusachet,vitamin d3 400-iu 15ml (drops),vitamin b complex 200ml (syrup),vitamin a syrup (60 ml),vitamin a solution (100ml),ultra sound gel (5kg),turpentine oil (100ml),tropicamide- 5ml eye drops,triple combination cream (momethasone 0.25% with tretin 0.1% with hydroquinone 2.0%) 15 gm,triamcinolone 0.1% w/v 5gm oral ointment,tretinoin 0.025% cream,topical5% emla cream 15gm,topical lignocaine 25mg/g, prilocaine 25mg/g cream-5%- 5 gm (cream),tobramycine 0.3%10ml (eye drops),tincture benzoine (100ml),timolol maleate 10ml eye drops,thrombophobe ointment (20gm),theophylline with etophylline (200ml syrup),sucralphate (170ml syrup),soft roll (15cm x3mtr),soft roll (10cm x3mtr),sodium valproate 200mg/100ml (syrup),sodium phosphate enema (100 ml),sodium hypochloride 5-6% solution 5ltr,sodium hypochloride 5-6% solution 20litr,sodium chloride (nasal drops),sodium by carbonet ip 600gms with sodium-chloride ip 230gms t packets 1x830,silymarin l-ornithine l-asparatate (200 ml syp),silver sulphadiazine -15gm cream,silver sulphadiazine -100gm cream,sildenafil oral suspension 10 mg/ml,salbutamol-nebulisation repsules 2.5mg 2.5ml (amp),salbutamol- nebuliser solution (salbutamol 100microgram/actuation pressurised inhalation 200 actuations(pi,cmi)-15ml.,salbutamol 2mg (100ml syrup),prednisolone acetate 1% + hpmc 0.25%-5 ml eye drop,povidone iodine solution in dark plastic bottle 500ml 5% w/v (500ml),povidone iodine ointment 5%w/v (15gm),povidone iodine ointment 5%w/v (125gm),povidone iodine cleansingsolution in dark plastic bottle 7.5 %w/v (500ml),potassium chloride (200ml syrup),pop roll 2.7 mtr x 15 cm (1roll),pop roll 2.7 mtr x 10 cm (1roll),phenytoin sodium 125mg (100ml syp),phenobarbiton 20 mg/5 ml-(100ml syp),permethrin 5% 30gm ointment,paracetamol 125mg/100ml (syrup),ors (who formula) 21gm,orodispersible probiotic sachets 2 gm-10 (sachets.),ondansetron 4mg/5ml 30ml (syrup),nuprep gel (114 gm),normal saline nasal 10ml drops,neomycin sulphate, polymyxin b sulfate and hydrocortisone 5 ml ear drop-,natamycin 5ml eye drops,mupirocin 2% 5gm ointment,multi vitamin with zinc 200ml (syrup),multi vitamin (zinc+b12+b-comp) drop-30ml,moxifloxacin 0.5%5ml eye drops,moxifloxacin 0.5% 5gm eye ointment,mometasone 1% 15gm (cream),micropore plaster size1.25cm x 9.1mtr 0.5 inch1roll (tissue plaster),micropore plaster size 7.5 cm x 9.1mtr 3inch 1roll(tissue plaster),micropore plaster size 2.5 cm x 9.1 mtr 1inch 1roll (tissue plaster),metronidazole 1.5% w/w -20gm gel,mefenamic acid with paracetamol 50+125mg/5ml 60ml (syp),mct oil 100ml (medium chain triglyceride (mct oil (100ml),luliconazole cream 1%w/v (10gm),liquid paraffin (60ml),lignocaine gel 2% (30gm),lignocaine 10% 50ml (spray),levetiracetam 100mg/ml (syrup),lactulose (200ml syrup),ketokonozol 2%with zinc payrithione 1% (100ml),ketoconazole 2% 20gm (cream),iron and folic acid-30 ml (drops),iron and folic acid (200ml syrup),ipratropium(500.0 mcg) + levosalbutamol / levalbuterol(1.25 mg) 3 ml (respules),hydrogen peroxide solution (100ml) amber bottle wrapped with black thick polybag with printed label 6% w/v,hmf sachet 2gm ( (lactodex hmf nutritional supplement sachet, 2 gm/sachet) sachet,haemocoagulase drops (10ml),glycin irrigation- (3ltr),glycerin-(100ml),glycerin & sodium chloride enema (20ml),glucose-sachets 75gm (dipsi-test),frusemide 10mg (30ml syp),framycetin sulphate 1% 10gm (skin cream),formoterol 6mcg with tiotropium 9mcg mdi 200 metered dose (inhalar),formaldehyde (5ltr),fluticasone propionate 50mcg (nasal spary) 120 meter doses,fluticasone propionate 250mcg with salmetero-25mcg mdi (120-metered dose inhalar),fluconazole cream 0.5%w/v-15gm,ferrous sulphate 20 mg/5ml (200ml syp),faropenem 50mg/5 ml (30ml syp),elemental calcium-300mg + elemental magnesium-75mg + elemental phosphorus-150mg + elemental zinc-4mg + vitamin d3-200iu3 (syp),eeg gel (250gm),ecg gel (250gm),dysodium hydrogen 100 ml(syp),dinoprostone gel for endocervical application( 3gm),dihydroxy1.6 dioxyhexane2.5(chemically bound formaldehyde11.2g glutaraldehyde 5gm benzalkonium chloride 5g alkyiureaderivative 3g aqueous base qs solution) (5ltr),digoxin 50mcg/1ml (30ml syp),diclofenac transdermal patch (100mg),diclofenac gel (diclofenac 1%+methyl salicylate 10%+menthol 5.0%) 1.00w/w (30gm),dichlorometaxylenol lotion (1 ltr),dextrose monohydrate s75 powder sachet (75gm),dextrometharphan hbr-10mg + chlorphenarmine maleate-2mg / 5ml100ml (cough syrup),dental oral-gel with lignocaine 2% 15gm,cotrimaxole 60ml (syp),clotrimazole 1%w/w 15gm (cream),clortimazole10ml (ear drops),clobetasol propionate 0.05%w/v salicylic acid3 %w/w 20gm cream,clindamycin hcl 60ml(syp),clasic paraffin gauge dressing 10cmx 10cm (pack of 100 dressings) (cuticell/equivalent),clarithromycine-250mg/5ml (syp),citro-sterile (5ltr),ciprofloxacin0.3%w/v eye/ear 10ml (drops),ciprofloxacin eye 10gm (ointment),ciprofloxacin 0.3%with 0.1%dexamathasone w/v 10ml (eye/ear drops),chlorhexidine mouth wash (100ml),chlorhexidine gluconate+cetrimide lotion+iso propyle alcohol (1ltr bottle),cetirizine hcl 5mg 60ml (syrup),calcium + vitamin d3 200ml (syrup),calamine lotion (60ml),budesonide-nebulisation solutions 0.5mg/2ml,budesonide (400mcg) with formoterol 6mcg mdi (metered dose inhalar),budecort(0.5) nibulisation solution per 2ml,betamethsone valerate cream tube (15gm),betamethasone 0.1% (ointment),benzoyl peroxide-2.5% 20gm (cream),benzoic acid 6% w/w and salicylic acid 3% w/w 15gm (ointment),beclomethasone with fusidicacid (10gm),barium sulphate powder (5kg),barium sulphate (1ltr),bandage cloth individually packed in poly-pack-1mtr x 20mtr (schedule f-ii as per d&c act),amoxycillin 400mg+clavulanate acid 57 mg 30ml (dry syrup),amoxycillin 125mg/1ml (drops),alcoholic hand rub 500ml (hand rub),adhesive tape (10 cm x 10 mtr roll),acyclovir 400mg ( (syp)),acyclovir 1% eye ointment,activated glutaraldehyde (5 litre),acid concentrate low potassium (1x20ltrs),acid concentrate bp with dextrose awa packing (1x20ltr),acetic acid 2% w/v ear dops,absorbent cotton wool (net weight) 500gm,zinc sulphate 20 mg dispersable (tab),xanithol nicotinate 500mg (tab),warfarin sodium-5mg (tab),voglibose-0.2mg (tab),vitamin-b complex(therapeutic) nfi (tab),vitamin -d3 60000 iu (tab),vitamin c chewable-500mg (tab),verapamil hydrichloride (tab) (calaptin) sr-40mg (tab),ursodeoxycholic acid 300mg (tab),trihexy phenidyl hydrochloride 2mg (tab),tinidazole-500 mg (tab),theophylline. with etophylline-23mg /77mg (tab),theophylline with etophylline 35mg/115mg (150 retard) (tab),thalidomide 100mg (tab),terbinafine-250mg (tab),telmisartan-80mg (tab),telmisartan-40mg (tab),telmisartan 40 mg+hydro chloro thiazide 12.5mg (tab),tamsulocin (0.4mg) with tolterodine (4mg) (tab),tamsulocin (0.4mg) with tolterodine (2mg) (tab),tamoxifen (tab),tadalafil 10mg with dapoxetine 30mg (tab),sodium valproate-500mg (tab),sodium valproate-200mg (tab),sildenafil citrate-50mg,sildenafil citrate-25mg,sertraline-50mg (tab),serratiopeptidase-10mg (tab),risperidone-2mg (tab),racecodotril 100mg-cap.,pyridoxine hydrochloride 40mg (tab),propranolol hydrochloride long-acting tab 20mg (ciplar la- 20mg) -tab,prochlorperazine (maleate) 5mg (tab),prednisolone-10mg (tab),prednisolone 40mg (tab),posaconazole-100mg (tab),phenytoin sodium (film coated)- 100mg (tab),phenylepherine 10mg (solvin or equivalant) (tab),phenobarbitone-60mg (tab),phenazopyridine hydrochloride (tab) (pyridium (tab)),pentoxyphilline 400mg (tab),paracetamol ip 500mg (tab),pantoprazole 40mg-(tab),oxybutinin 5mg-(tab),oxybutinin 2.5mg (tab),omeprazole ip 20mg (tab),olanzapine-10mg (tab),olanzapine -5mg (tab),ofloxacin ip 200mg (tab),norfloxacin 400mg-(tab),nitazoxanide-500 mg (tab),nintedanib 150mg (tab),nifedipine-10mg (tab),nifedipine sustained release (tab) 10mg (nicardia retard 10mg (tab)),nicorandil 10mg (tab),nicardia rtd 20mg (tab),naproxane-200 mg (tab),multivitamin-a-800 iu b1-0.5mg b-20.5mg b6-0.5 mg d3-50 iu niacinamide 10mg (tab),moxonidine 0.3 mg (tab),montilukast+levocetirizine-10mg+5mg (tab),misoprostol-200mcg (tab),mifepristone 200mg (tab),metronidazole 400mg-(tab),metoprolol-50mg (tab),metformin-500mg (tab),losartan 50mg (tab),lorazepam-2mg (tab),loperamide-2mg (tab),lithium carbonate-300mg (tab),levofloxacin 500mg (tab),levocetirizine 5mg (tab),levocetirizine 10mg (tab),lactobacillus 120mg (tab),labetalol 100mg (tab),ivermactin 12mg (tab),isoxuprine hydrochloride 20mg (tab),isosorbide dinitrate-10mg (tab),iron-folic acid(adult)containing iron equivalent to 100mg elemental iron and folic acid 0.5mg-335mg and 0.5mg (tab),imipramine hcl-25mg (tab),ibuprofen(film coated)400 mg (tab),hydroxychloroquin hcq 200mg (tab),haloperidol-5mg (tab),griseofulvin 250mg-(tab),glimepiride 1mg (tab),glibenclamide-5mg (tab),ginkgo biloba (tab),gastro-resistant acamprosate calcium 333mg (tab),furosemide (20mg) with spironolactone (50mg) (tab) (lasilactone 50mg),frusemide 40mg-(tab),folic acid 5mg (tab),fluoxetine-20mg (tab),fluconazole-150mg (tab),ethambutol 275mg with isoniazid 75mg with rifampicin 150mg (eg-(tab) akurit 3, tab trac 3),ethambutol 275mg with isoniazid 75mg with pyrazinamide 400mg with rifampicin 150mg (eg-tab akurit 4,tab trac 4) (tab),enalapril maleate 5mg (tab),doxylamine 10mg (tab) (doxylamine succinate pyridoxine folic acid (tab)lets, 20 mg),doxycyclin ip 100mg (cap),domperidone ip 10mg (tab),digoxin-0.25mg (tab),dicyclomine 20mg (tab),diclofenac sodium ip 50mg (tab),diazepam 5mg-(tab),desmopressin (tab)let 0.1mg (tab),darifenacin 7.5mg (tab) (derifenacin hydrobromide extended-release (tab) ip 7.5mg),darifenacin 15mg (tab),cyclophosphamide 50mg (tab),cotrimoxazole ip ds (sulphamethoxazole 800mg+trimethoprim 160mg) (tab),clopidogrel 75mg (tab),clonazepam 0.5mg (tab),ciprofloxacin ip 500mg (tab),chlorpromazine-50mg (tab),chlorpromazine-100mg (tab),chloropheniramine maleate 4mg (tab),chlordiazepoxide-25mg (tab),cetrizine 10mg, phenylephrine 10mg (tab),cetirizine hydrochloride bp 10mg (tab),cefixime 200mg (tab),carveidalol 6.25mg (tab),carbamazepine-200mg (tab),calcium+vitamin d3 500mg (tab),calcium citrate with malate 1000mg (tab) (calcium citrate malate 1000mg, vitamin d3 200 iu, elemental magnesium 100mg and zinc 4mg. (tab),bisacodyl(enteric coated) 5mg (tab),bisacodyl suppositories ip 10mg tab,bethanechol 25mg (tab),betamethasone 0.5mg (tab),azithromycine 500mg (tab),atorvastatin 10mg (tab),atenolol 50mg (tab),aripiprazole 30 mg tab,amoxycillin with pot-clavulanate 625mg (tab),amoxycillin 500mg (cap),amlodipine 5mg(tab),amitriptyline 25mg (tab),amiodarone 200mg (tab),alprazolam 0.25mg (tab),alfuzocin with dutasteride (tab) (alfuzosin hydrochloride 10mg + dutasteride 0.5mg generic drugs),albendazole ip 400mg (tab),acyclovir 400mg (tab),acitretin 25mg (cap),acetyl salicylic acid (enteric coated) 75mg (tab),vitamin k 1mg/1ml (injection),vitamin k 10mg/1ml (injection),vitamin b-complex 500mcg/ml 2ml (injection),vecuronium bromide 4mg 2ml (injection),vancomycin-500mgpantoprozloe 40mg/10ml with sterile water for injection (injection),tryphan blue 0.6% solution (injection),triamcinolone acetate (preservative free) 40mg (injection),triamcinolone 10mg (injection),triamcilone acetonide 80mg (injection),tranexamic acid 100mg/5ml (injection),tramadol 2ml (injection),total parenteral nutrition (tpn) 1500ml (injection iv),thiopental sodium 500mg (injection),thiamine 100mg/ml (injection),theophylline+etophylline 23mg+77mg/1ml (injection),tetanus toxoid 0.5ml amps (injection),tetanus immunoglobulin 500iu (injection),surfactant (each ml contains 25mg of phospholipids) intratracheal suspension sterile-4ml vial (injection),streptokinase 15lakh iu (injection),sterile succinylcholine chloride 20mg/ml (injection),sodium valproate 100mg/ml (injection),sodium tetradecyl sulphate (injection),sodium flourescien 20% 3ml (injection),sodium chondroitin sulfate 40mg with sodium hyaluronate 30mg with monobasic sodium phospate dihydrate (injection),sodium chloride iv 0.9% 3ltrs (injection iv),sodium chloride 3% 100 ml (injection iv),sodium chloride 0.9% w/v 100ml iv (injection iv),sodium chloride 0.9% w/v iv fluid 5ltr (injection iv),sodium chloride 0.9 %w/v 1000ml iv ffs (injection iv),sodium chloride 0.9 % w/v 500ml iv ffs (injection iv),sodium bicarbonate 7.5% w/v amp 10ml (injection),snake venom antiserum ip lyophilized polivalent powder form with sterile water for (injection),sevoflurane 250ml (injection),ropivacain hydrochloride in dextrose injection (ropin 0.75% heavy) 4ml (injection),ringers lactate solution for 500ml iv ffs bottle (injection iv),retiplace 18mg (injection),ranitidine ip 25mg/ml (injection),rabies vaccine-purified tissue culture 2.5 iu im/id 0.5 ml wfi combi pack 1ml x 1ml water for injection (injection),rabies immunoglobulin 1500 iu/5ml (injection),rabies human monoclonal antibody(rdna) 40iu/2.5ml (injection),pure crystalline essential amino acide i.v. infusion 200ml (hermin infusion or equivalent) (injection),protamine sulphate 10mg (injection),propofol 10ml 10ml (injection),promethazine hcl 2ml (injection),pralidoxime chloride 1gm 1gm+1water for injection (injection),potassium chloride 10ml (injection),plasma expander (hydroxy ethyl starch 6%)-500 ml iv (injection iv),piperacillin 4gm+tazobactam 0.5 gm (injection),pilocarpine nitrate 0.5% w/v 1ml (injection),phenytoin sodium 2ml (injection),phenobarbitone sodium 2ml (injection),pheniramine maleate 2ml (injection),pge2 infusion (injection),pentazocine lactate-30 mg1 ml (injection),paracetamol 500mg/100ml (injection iv),pantoprozloe 40mg/10ml with sterile water for injection (injection),oxytocin 1ml 5iu/ml (injection),ondansetron 2mg (injection),ofloxacin 100ml iv ffs (injection iv),octreotide-100mcg-1ml (injection),nor adrenaline-2ml (injection),nitro glycerin 25 mg-5ml (injection),neostigmine methyl sulphate-1ml (injection),multiple electrolytes and dextrose (paediateric)-iv ffs- 5% (injection iv),multi vitamin 10ml (injection),morphine 10mg/2ml (injection),midazolam 5ml vial (injection),metronidazole iv 100ml ffs (injection iv),metoclopramide 2ml (injection),methylprednisolone 1gm with sterile water for injection (injection),methylene blue vial 10ml/10mg (injection),methyl prednisolone 40mg vial with sterile water for injection (injection),meropenam 1gm with sterile water for injection (injection),mephentermine-10ml (injection),mannitol-(positive oral)100ml (injection),mannitol-(nagative oral)100ml (injection),mannitol 20% 100ml iv ffs (injection iv),magnesium sulphate 500mg 2ml (injection),l-ornithine l-aspartate 500mg (injection),lorazepam 2ml (injection),linezolid 300 ml (injection iv),lignocaine 4% 30ml(topical) (injection),lignocaine 20mg with adrenaline 0.01mg 30 ml amber colour vial (injection),lignocaine 2% w/v-30ml vial (injection),lignocaine 2% 50ml vial (equivalent to xylocard) (injection),levofloxacin 500 mg/100ml (injection iv),leveteracetam-5ml (injection),labetalol inj 5mg/20ml vial (injection),ketamine 10ml vial (injection),isoflurane-250ml (injection),iron sucrose-5ml (injection),iohexal 350mg/100ml (omnipaque) (injection),iohexal 300mg/100ml (injection),iodixanol 320 mg/100ml (injection),insulin human (rapid acting) 10ml-40 iu/ml (injection),hyoscine butyl bromide amp-1ml (injection),hydroxy propyl methyl cellulose prefilled syringe-3ml (injection),hydrocortisone sodium succinate 100mg/vial with sterile water for injection (injection),hyaluronidase 1ml amp 1500iu/ml (injection),human albumin 20% -100ml (injection),hepatitis-b vaccine vials (injection),hepatitis b immunoglubin 100 iu-1ml (injection),heparin 5000 iu-5ml (injection),haloperidol-5mg/1ml (injection),haemocoagulase aqueous 1n.i.h thrombin unit/ ml or equivallent unit-1ml (injection),glycopyrrolate 0.2mg/1ml (injection),gentamicin ip each 2ml contains gentamycin 80mg (injection),ganciclovir 250mg (injection),gadodiamide 0.5 mmol/ml 20ml (omniscan) (injection),frusemide inj 2ml (injection),fluphenazine 1ml (injection),fluconazole-100ml iv (injection iv),five-fluoroucracil 500mg/10ml (injection),ferric carboxy maltose- 500mg/10ml (injection),fentanyl citrate 50mcg/ml (injection),fentanyl 100 mcg/2ml (injection),erythropoietin 4000 iu pre filled syringe (pfs) (injection),enoxaparine (lmw prefilled syringe) 40mg (injection),drotaverine-2ml (injection),dopamine hydrochloride-5ml (injection),dobutamine-5ml (injection),diltiazam-5 mg/ml (injection),diclofenac sodium ip 25mg/ml (injection),diazepam-2 ml/5 mg ( (injection),dextrose 500 ml-iv ffs inj 10% w/v (injection iv),dextrose 500 ml-iv ffs 5% w/v (injection iv),dextrose 5% with sodium chloride 0.9%- 500 ml-iv ffs (injection iv),dextrose 25% 25ml (injection),dexamethasone sodium phosphate 2ml (injection),darbepoetin 40mcg/0.4ml (injection),cyno acrylate glue (injection),cyclophosphamide 500mg vials (injection),cyanocobalamin 500 mg+folic acid 15mg+niacinamide 200mg (injection),cloxacillin 500 mg (injection),cloxacillin 250 mg (injection),clindamycin phosphate-150mg/ml (injection),ciprofloxacin iv ffs-iv-100 ml (0.2% w/v) (injection iv),ceftriaxone 1000mg with sterile water for injection (injection),cefotaxime sodium 1000mg with sterile water for injection (injection),carboprost tromethamine 1ml 250mcg (injection),calcium gluconate 10ml (injection),bupivacaine hydrochloride 0.5% 20ml (injection),bupivacaine hcl in dextrose (heavy) 4ml (injection),bleomycin 1510 (injection),biphasic isophane insulin 30/70 (recombinant human monocomponent insulin)-10ml (injection),benzathene penicillin ip-12lakhs with sterile water for injection (injection),atropine sulphate100ml (injection iv),atropine sulphate 1ml amp (injection),atracurium besilate-2.5ml 10mg (injection),artesunate-60mg (injection),anti-d rh immunoglobin vial monoclonal-300mcg (injection),anti diphtheria 10000iu/ serum 10ml,ampicillin 500mg with sterile water for injection (injection),ampicillin 250 mg with sterile water for injection (injection),amphotercin b 50mg(liposomal) (injection),amoxycillin sodium+clavulanate potassium 1200mg with sterile water for injection (injection),amiodarone sterile concentrate-3ml 150mg (injection),aminophylline 10 ml amp (injection),amino acid infusion containing l-arginine histidine hcl isoleucine leucine arginine phenylalanine threonine tryptophan valine glycine sorbitol methionine lysine ffs 200ml (injection iv),amikacin sulphate ip 500mg/2ml (injection),amikacin sulphate ip 250 mg/2ml (injection),amidotrizoate meglumine(urograffin) sodium amidotrizoate 76% (injection),adrenaline 1ml (injection),adrenaline 11000/1ml(epitrate 1ml) (injection),adenosine 6mg (injection),acyclovir 500 mg/10ml (injection),acetylcysteine2ml (injection)

State Government

TRN :49029493 | 15 May, 2025

Tender Value : 32.33 Lacs

Gautam Buddha Nagar - Uttar Pradesh

Tender for construction of e-library room in village begmabad yea. wc-06 - earth work in excavation in ordinary soil in all of foundation trenches including dressing of the side and ramming of bottom.lifts up to 1.50 m including getting out theexcavated soil and disposal of surplus excavated soil as directed with in a lead of 50m. (most/a.r./yeida) 2 supplying chemical emulsion in sealed containers including delivery as specified. chlorpyriphos/ lindane emulsifiable concentrate of 20%. (dar/2.34.1/based on uppwd/sor-2020)) 3 diluting and injecting chemical emulsion for post-constructional anti-termite treatment (excluding the cost of chemical emulsion) : treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 coarse sand) to match the existing floor: with chlorpyriphos/lindane e.c. 20% with 1% concentration (dar/2.35.3.1/based on uppwd/sor-2020)) 4 2.5 cm thick damp proof course with cement and approved coarse sand 1:1½ with and including water proofing as ordered by the engineer incharge in the proportion as specified by the manufacturer including supply of all materials, labour, tools & plants etc. required for proper completion of the work and including proper curing & shutterings as necessary. (uppwd/sor-2020/361) 5 applying a coat of residual petroleum bitumen of grade of vg-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 6 cement concrete with 4cmgauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all material, labour, tools&plants etc required for proper completion of the work. 7 b/w with bricks of class 150 in foundation & plinth in cm 1:4 (based on up pwd sor 2020) cement mortar 1:4 ( 1cement :4coarse sand) 8 m-150 brick work in 1:4 one cement and four course sand 2.20 f.m. mortar superstructure but for walls of half brick thick including supply of all material, labour, t&p etc. required for proper completion of the work. (uppwd/sor-2020/305(a)+310a 9 m-150 brick work in 1:4 one cement and four course sand 2.20 f.m. mortar superstructure but for walls of half brick thick including supply of all material, labour, t&p etc. required for proper completion of the work. (uppwd/sor-2020/305(a)+310a 10 extra for providing and placing in position 2 nos 6mm dia. m.s. bars at every third course of half brick masonry.uppwd-sor-2020-dar-18/6.15/ 11 providing and laying in position machine batched and machine mixed design mix m-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-in-charge. (note :- cement content considered in this item is @ 330 kg/cum. excess/ less cement used as per design mix is payable/recoverable separately). all works upto plinth level 12 providing and laying in position machine batched and machine mixed design mix m-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-in-charge. (note :- cement content considered in this item is @ 330 kg/cum. excess/ less cement used as per design mix is payable/recoverable separately).all works above plinth level upto floor v level 13 centringand shutteringincluding strutting, propping etc. andremoval of form for : foundation footings, base of column 14 centringand shutteringincluding strutting, propping etc. andremoval of form for : lintels, beams, plinth beam, grinder 15 centringand shutteringincluding strutting, propping etc. andremoval of form for : suspended floors, roofs, landings 16 columns, pillars, piers, abutments, posts and struts. (dar/5.9.6/based on uppwd/sor-2020)) 17 edges of slabs and breaks in floors and walls:under 20 cms wide. (dar/5.9.16.1/based on uppwd/sor-2020)) 18 earth work in rough excavation , banking excavaated earth in layers not exceeding 20 cm in depth, breaking clods watering, rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, all leads as per(a.r. )for all kind of soil. 19 steel rainforcement for r.c.c. work including straightening, cutting bending, placing in position and binding all complete upto plinth level thermo-mechanically treated bars of grade fe-500d or more./cold twisted bars. (dar/5.22.6/based on uppwd/sor-2020)) 20 12mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand)based on up pwd sor 2020 dar-18/13.4.2 21 6mm cement plaster of mix: 1:3 (1 cement : 3 coarse sand)based on up pwd sor 2020 dar-18/13.17 22 15mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand)based on up pwd sor 2020 dar-18/13.4.2 23 finishing walls with acrylic smooth exterior paint of required shade: new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). 24 distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade 25 providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.dar-18/13.26 26 painting with synthetic enemel paint of approved brand and manufacture to give an even shade: two or more coats on new work. 27 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 110mm dia 28 providing and fixing on wall face unplasticised - pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. single tee with door 110x110x110 mm (dar/12.42.3.2/based on uppwd/sor-2020) 29 bend 87.5° 110 mm bend (dar/12.42.5.2/based on uppwd/sor-2020) 30 shoe (plain) 110 mm shoe (dar/12.42.6.2/based on uppwd/sor-2020) 31 providing and fixing unplasticised -pvc pipe clips of approved design to unplasticised - pvc rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with m.s. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm (dar/12.43.2/based on uppwd/sor-2020) 32 providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.(dar/12.44/based on uppwd/sor-2020) 33 steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.dar-18/10.25.2 34 providing and fixing water closet squatting pan (indian type w.c. pan with 100mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required white vitreous china orissa pattern w.c. pan of size 580x440mm with integral type foot rests.up pwd sor-2020-dar 18/17.1.1 35 providing and fixing wash basin with c.l. brackets, 15 mm c.p. brass pillar taps,32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:uppwd sor-2020-dar 17.7.1 36 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge.20mm od pipes. (dar/18.8.2/based on uppwd/sor-2020) 37 25mm od pipes. (dar/18.8.3/based on uppwd/sor-2020) 38 providing and fixingbrass gate valve with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore. (dar/18.17.1/based on uppwd/sor-2020) 39 32 mm nominal bore. (dar/18.17.2/based on uppwd/sor-2020) 40 providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to is. 2645 and approved by engineer-in-charge over the rcc slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to is : 2645 and approved by engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) after two days of proper curing applying a second coat of cement slurry using 2.75kg! sqm of cement admixed with water proofing compound conforming to is : 2645 and approved by engineer-in-charge. d) finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand) admixed with water proofing compound conforming to is: 2645 and approved by engineer-in-charge including laying glass fibre doth of approved quality in top layer of plaster and finally finishing the surface with trowe’ with neat cement suvr an making pattern ot 300x300 mm square 3mm deep. e) the whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. all above operations to be done in order and as directed and specified by the engineer-in-charge: dar18/22.7.1 41 providing and placing on terrace (at all floor levels) polyethylene water storage tank isi: 12701 marked with cover and suttable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank dar 18/ 18.48 42 making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - iii) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.(dar 2018-4.17)based on uppwd sor/2020 43 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600mm (dar/11.41.2/based on uppwd/sor-2020)) 44 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (dar/8.31/based on uppwd/sor-2020)) 45 providing and fixing brass bib cock of approved quality: 15 mm nominal bore (dar/18.15.1/based on uppwd/sor-2020)) 46 providing and fixingbrass gate valve with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore. (dar/18.17.1/based on uppwd/sor-2020) 47 providing and fixing nahani trap 75x100mmincluding all complete. 48 20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand-dar-18/13.6.1/p-902 49 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30mm thick including isi marked stainless steel butt hinges with necessary screws. (dar/9.21.2/based on uppwd/sor-2020)) 50 extra for providing isi marked stainless steel butt hinges instead of m.s. pressed butt hinges bright finished of required size with necessary screws. (shutter area to be measured). (dar/9.14/based on uppwd/sor-2020)) 51 renewing panes of glass in door, window & ventilators or fixing in the new work with 3mm thick glass panes fixed with brads & putty includung supply of all material , labour , tools & plants required for proper completion of workuppwd sor 2020/p26/806 52 prroviding and fixing isi mark 3 layer prelaminated particle board conforming to grade 2 type-iii of is-12823/20b laminated with 0.6-0.8 mm thick laminate conforming to is-2046/1995 and balancing lamination of 0.5 mm thick on the back side (size 700750430) including all complete 53 supply of work sb collection office/visitor chain with sheat dxwxh 400400450 mm padded with polyurithane foam complete 54 supply wook at site sb collection executive table of 3 layer prelaminated particle board (wood product) of grade 2 type 2 of is-12823/latest 1830 mm 950 mm 750mm including all complete 55 supplying and filling in plinth with jamuna sand under floors, including watering, ramming, consolidating and dressing complete. dar-18/2.27 56 providing and fixing factory made isi marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as f7d, f4b, k11 b and k12 b etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of c.c. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 57 constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast r.c.c. horizontal grating with frame complete as per standard design with common burnt clay f.p.s. (non modular) bricks of class designation 7.5.(dar/18.33.1/based on uppwd/sor-2020) 58 providing, laying and jointing glazed stoneware pipes class sp-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : (dar/19.1.1/based on uppwd/sor-2020) 59 providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round s.w. pipes including bed concrete as per standard design : (dar/19.2.2/based on uppwd/sor-2020) 60 providing and fixing square-mouth s.w. gully trap class sp-1 complete withc.i. grating brick masonry chamber with water tight c.i. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: (dar/19.4.1/based on uppwd/sor-2020) 61 providing and fixing heavy class ss gratingof approved design including setting in floor with cement motor to match with floor finish as per architect requirement suitable for waster and ft, ut & fd.size 150 mm x 150 mm 62 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.(dar/17.73.2/based on uppwd/sor-2020)) 63 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. (dar/17.31/based on uppwd/sor-2020)) 64 providing and fixing ptmt soap dish holder having length of 138mm, breadth102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. (dar/18.65/based on uppwd/sor-2020)) 65 providing and fixing chicken wire mesh (murga jali) 24 gauge and 20 mesh at junction of rcc and masonry walls including fixing in position with steel nails of 25 mm in length as approved at required as directed by engineer-in-charge, scaffolding etc. complete. (ar/yeida//based on uppwd/sor-2020))½x24 gauge 66 providing and fixing aluminium hanging floor door stopper, isi marked, anodised (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.(dar/9.101.1/based on uppwd/sor-2020))single rubber stopper 67 providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:250x10mm(dar/9.97.2/based on uppwd/sor-2020)) 68 providing and fixing aluminium handles,isi marked, anodised (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete.125 mm (dar/9.100.1/based on uppwd/sor-2020)) 69 providing and fixing ptmt extension nipple for water tank pipe, fittings of approved quality and colour.25mm nominal bore, weighing not less than 62 gms. (dar/18.75.3/based on uppwd/sor-2020)) 70 providing & fixing of cp heavy duty bottle trap 32mm. (complete complying with relavent standard specification and as directed by the competent authority.) for wash basin&urinal 71 providing and fixing 1 mm thick m.s. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm m.s. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and t- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer up pwd sor-2020-dar-18/10.4 72 construction of granular sub-base by providing close graded material, mixing in mechanical mix plant at omc, carriage of mixed material to work at site, spreading uniform layers with motor grader on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 for grade-1 material. (morth/(ar/yeida/based on uppwd/sor-2020) 73 providing and laying 60mm thick i.s.i. mark factory made cement concrete interlocking concrete paver block made by block making machine with strong vibratory compaction of approved size, design, shape, laid in required colour and pattern over and including average 50mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per the direction of engineer-in-charge with conforming to is-15658 and irc:sp:63. (ar/yeida/ based on uppwd/sor-2020) 74 wiring point for light in 1.5 sq. mm. pvcinsulated singlecorecopperconductor cable (inpvcconduit with 1.5sq.mm. frlsh pvc insulated multistrand copperconductor cable as earth wire drawn inside conduit.)and5 amp.flush typeswitch& ceiling rose/angle/batten holderfixedwith3mmthickphenolic laminate backalitesheet withbrass machinescrews andcup washers mounted overexisting m.s.switch boardbox/junction boxwith supplyofallmaterial, labour& t&p etc. requiredforproper completion of the work complete in all respect, as directed by engineer in charge pwd-2018 ps no-174c 75 supply and wiring of submains with 2 nos. of 2.5 sq. mm. frlsh pvc insulated1100 vgrade multistrand singlecore copper conductorcable in 25mm dia heavy duty (2mm thick) pvc conduitwith2 nos 2.5 sq.mm.frlsh pvc insulated multistrand copperconductor cable asearth continuity wire drawn in conduit complete in all respect, as directed by engineer in charge pwd-2018 ps no-261c 76 supply and fixing of power plug with 20 amp./250 voltflush type modularswitchand 5 pin 20 a/250 voltflush typeuniversal modular socket switch on concealed m.sboxincluding supply of allmaterial, labourt&petc. complete in all respect, as directed by engineer in charge .pwd-2018 ps no-1139a 77 s&f surface/flush mounting 8 ways spn distribution board with additional metal door without mcb complete in all respect, as directed by engineer in charge. pwd-2018 ps -1024a 78 s&f of 6 amp to 32 amp. mcb (10 ka) c curve complete in all respect, as directed by engineer in charge.pwd-2018ps -1002cat-a 79 s&f of 40amp. dp mcb (10 ka) c curve complete in all respect, as directed by engineer in charge. pwd-2018 ps no-1010 cat-a 80 providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. clamp shall be made of 12 mm dia m.s. bar bent to shape as per standard drawing. (dar/10.18/based on uppwd/sor-2020))

Central Government/Public Sector

TRN :34404893 | 12 May, 2025

Tender Value : 0

Jamshedpur - Jharkhand

Tender for gem bids for clearing jungle including uprooting of rank vegetation grass brush wood trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. "supplying chemical emulsion in sealed containers including delivery as specified. chlorpyriphos or lindane emulsifiable concentrate of 20 percent" "diluting and injecting chemical emulsion for post constructional anti termite treatment excluding the cost of chemical emulsion along external wall where the apron is not provided using chemical emulsion at the rate 7.5 litres or sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall and rodding etc. complete isto with chlorpyriphos or lindane e.c. 20 percent with 1 percent concentration" "earth work in excavation by mechanical means hydraulic excavator or manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m all kinds of soil." filling available excavated earth excluding rock in trenches plinth sides of foundations etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering lead up to 50 m and lift upto 1.5 m supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete. "providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1 isto 3 isto 6 1 cement 3 coarse sand zone iii 6 graded stone aggregate 20 mm nominal size " "providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering finishing and reinforcement all work up to plinth level isto 1 isto 1.5 isto 3 1 cement 1.5 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size " "reinforced cement concrete work in walls any thickness including attached pilasters buttresses plinth roof and string courses fillets columns pillars piers abutments posts and struts etc. above plinth level up to floor five level excluding cost of centering shuttering finishing and reinforcement 1 isto 1.5 isto 3 1 cement 1.5 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size " brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in foundation and plinth in cement mortar 1 isto 6 1 cement 6 coarse sand brick work with common burnt clay f.p.s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in cement mortar 1 isto 6 1 cement 6 coarse sand "half brick masonry with common burnt clay f .p .s. non modular bricks of class designation 7.5 in superstructure above plinth level up to floor v level. cement mortar 1 isto 4 1 cement 4 coarse sand " "centering and shuttering including strutting propping etc. and removal of form for foundations footings bases of columns etc. for mass concrete" "centering and shuttering including strutting propping etc. and removal of form for suspended floors roofs landings lintals beams balconies and access platform" "steel reinforcement for r.c.c. work including straightening cutting bending placing in position and binding all complete upto plinth level thermo mechanically treated bars of grade fe 500d or more make sail or tata or jindal " "15 mm cement plaster on the rough side of single or half brick wall of mix isto 1 isto 6 1 cement isto 6 fine sand rates for external plastic are for height upto 10m from ground level in less otherwise stated cement make nuvoco lafarge or ultratech or acc or as per direction of eic " "12 mm cement plaster of mix 1 isto 6 1 cement isto 6 fine sand rates for external plastic are for height upto 10m from ground level in less otherwise stated cement make nuvoco lafarge or ultratech or acc or as per direction of eic " "6 mm cement plaster of mix 1 isto 3 1 cement 3 fine sand rates for external plastic are for height upto 10m from ground level in less otherwise stated cement make nuvoco lafarge or ultratech or acc or as per direction of eic " neat cement punning. "finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade new work two or more coats applied at the rate 1.43 ltr or 10 sqm over and including priming coat of exterior primer applied at the rate 2.20 kg or 10 sqm make dulux or burger or asian paints or as per direction of eic" white washing with lime to give an even shade new work three or more coats mix with fevicol ddl and robin blue or as per direction of eic "painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. preferable make dulux or burger or asian paints or as per direction of eic make dulux or burger or asian paints or as per direction of eic" making plinth protection 50mm thick of cement concrete 1 isto 3 isto 6 1 cement 3 coarse sand zone iii 6 graded stone aggregate 20 mm nominal size over 75mm thick bed of dry brick ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including necessary excavation levelling and dressing and finishing the top smooth "providing and fixing angle iron frames for doors windows and ventilators of mild steel angle sections of size 35x35x5 mm joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing t iron frame or to the wall with dash fastener including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer all complete as per the direction of engineer in charge. make sail or tata or jindal " "providing and fixing isi marked flush door shutters conforming to is isto 2202 part i decorative type core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including isi marked stainless steel butt hinges with necessary screws" "structural steel work in single section fixed with or without connecting plate including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete. make sail or tata or jindal " 25 mm thick pvc flush door shutters made out of a one piece multi chamber extruded pvc section of the size of 762 mm into 25 mm or less as per requirement with an average wall thickness of 1 mm plus or minus 0.3 mm . pvc foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. m.s. tube having dimensions 19 mm into 19 mm and 1.0 mm plus or minus 0.1 mm is inserted along the hinge side of the door. core of the door shutter should be filled with high density polyurethane foam. the top and bottom edges of the shutter are covered with an end cap of the size 25 mm into 11 mm. door shutter shall be reinforced with special polymeric reinforcements as per manufacturer specification and direction of engineer in charge to take up necessary hardware and fixtures. stickers indicating the locations of hardware will be pasted at appropriate places "providing and fixing isi marked oxidised m.s. sliding door bolts with nuts and scrows etc. complete .as per the direction of directions of engineer in charge.300x16 mm " "providing and fixing ist quality ceramic glazed wall tiles conforming to is 15622 thickness to be specified by the manufacturer of approved make somany or kajaria or nitco in all colours shades except burgundy bottle green black of any size as approved by engineer in charge in skirting risers of steps and dados over 12 mm thick bed of cement mortar 1 isto 3 1 cement 3 coarse sand and jointing with grey cement slurry at the rate 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. make isto somany or kajaria or nitco or asian or as per direction of eic" "providing and laying vitrified floor tiles in different sizes thickness to be specified by the manufacturer with water absorption less than 0.08percent and conforming to is 15622 of approved make in all colours and shades laid on 20mm thick cement mortar 1 isto 4 1 cement 4 coarse sand jointing with grey cement slurry at the rate 3.3 kg or sqm including grouting the joints with white cement and matching pigments etc. complete. size of tile 600x600 mm make somany or kajaria or nitco or asian or as per direction of eic" "providing and fixing water closet squatting pan indian type w.c.pan with 100 mm sand cast iron p or s trap 10 litre low level white p.v.c. flushing cistern including flush pipe with manually controlled device handle lever conforming to is 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required white vitreous china orissa pattern w.c. pan of size 580x440 mm with integral type foot rests preferable make hindware or parrywair or hindustan or cera or direction of eic" "providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and c.p. brass spreaders with brass unions and g.i clamps complete including painting of fittings and brackets cutting and making good the walls and floors wherever required one urinal basin with 5 litre white p.v.c. automatic flushing cistern preferable make hindware or parrywair or hindustan or cera or direction of eic" "providing and fixing wash basin with c.i. brackets 15 mm c.p. brass pillar taps 32 mm c.p. brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require isto white vitreous china wash basin size 630x450 mm with a single 15 mm c.p. brass pillar tap" "providing and fixing p.v.c. waste pipe for sink or wash basin including p.v.c. waste fittings complete. semi rigid pipe 32 mm dia" providing and fixing 600x450 mm beveled edge mirror of superior glass of approved quality complete with 6 mm thick hard board ground fixed to wooden cleats with c.p . brass screws and washers complete. "providing and fixing brass bib cock of approved quality 15 mm nominal bore" "providing and fixing brass stop cock of approved quality 15 mm nominal bore" providing and fixing circular or hexagonal cast iron or m.s. sheet box for ceiling fan clamp of internal dia 140 mm 73 mm height top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron or m.s. sheet box by means of 3.3 mm dia round headed screws one lock at the corners. clamp shall be made of 12 mm dia m.s. bar bent to shape as per standard drawing. providing and fixing isi marked oxidised m. s handles conforming to is 4992 with necessary screws etc. complete 125 mm providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete. providing and fixing is 12817 marked stainless steel butt hinges heavy weight with stainless steel screws etc. complete 100x60x2.50 mm "providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. for external work a. 15 mm dia nominal bore preferable make tata or jindal or as per direction of eic" "providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. for external work b. 20 mm dia nominal bore preferable make tata or jindal or as per direction of eic" providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. for external work d. 50 mm dia nominal bore preferable make tata or jindal or as per direction of eic "providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is 13592 type a including jointing with seal ring conforming to is 5382 leaving 10 mm gap for thermal expansion single socketed pipes. 110 mm diameter" "providing and fixing gun metal gate valve with c.i. wheel of approved quality screwed end isto 20 mm nominal bore" "providing and fixing gun metal gate valve with c.i. wheel of approved quality screwed end isto 50 mm nominal bore" providing and placing on terrace at all floor levels polyethylene water storage tank is isto 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank. providing and fixing 100 mm sand cast iron grating for gully trap constructing brick masonry chamber for underground c.i. inspection chamber and bends with bricks in cement mortar 1 isto 4 1 cement 4 coarse sand c.i. cover with frame light duty 455x610 mm internal dimensions total weight of cover with frame to be not less than 38 kg weight of cover 23 kg and weight of frame 15 kg r.c.c. top slab with 1 isto 1.5 isto 3 mix 1 cement 1.5 fine sand isto 3 graded stone aggregate 20 mm nominal size foundation concrete 1 isto 5 isto 10 1 cement 5 fine sand 10 graded stone aggregate 40 mm nominal size inside plastering 12 mm thick with cement mortar 1 isto 3 1 cement isto 3 coarse sand finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets isto with common burnt clay f.p.s. non modular bricks of class designation 7.5 "constructing masonry chamber 30x30x50 cm inside in brick work in cement mortar 1 isto 4 1 cement isto 4 coarse sand for stop cock with c. i. surface box 100x100 x75 mm inside with hinged cover fixed in cement concrete slab 1 isto 2 isto 4 mix 1 cement isto 2 coarse sand isto 4 graded stone aggregate 20 mm nominal size i or c necessary excavation foundation concrete 1 isto 5 isto 10 1 cement isto 5 fine sand isto 10 graded stone aggregate 40mm nominal size and inside plastering with cement mortar 1 isto 3 1 cement isto 3 coarse sand 12mm thick finished with a floating coat of neat cement complete as per standard design isto with common burnt clay f.p.s. non modular bricks of class designation 7.5" providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level isto 1 isto 1.5 isto 3 1 cement isto 1 coarse sand zone iii 3 graded stone aggregate 20 mm nominal size making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and s.w. drain pipe 100 mm diameter 1.8 m long complete as per standard design. with common burnt clay f.p.s. non modular bricks of class designation 7.5 "cement concrete flooring 1 isto 2 isto 4 1 cement isto 2 coarse sand isto 4 graded stone aggregate finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate" "providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm plus 0.05 percent total coated thickness zinc coating 120 grams per sqm as per is 277 in 240 mpa steel grade 5 to 7 microns epoxy primer on both side of the sheet and polyester top coat 15 to 18 microns using self drilling or self tapping screws complete ridges plain 500 to 600mm " "providing and fixing precoated galvanised iron profile sheets size shape and pitch of corrugation as approved by engineer in charge 0.50 mm plus 0.05 percent total coated thickness with zinc coating 120 grams per sqm as per is 277 in 240 mpa steel grade 5 to 7 microns epoxy primer on both side of the sheet and polyester top coat 15 to 18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin charge. the sheet shall be fixed using self drilling or self tapping screws of size 5.5 x 55 mm with epdm seal complete upto any pitch in horizontal or vertical or curved surfaces excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required." providing and fixing of glass panes with putty and glazing clips in steel doors and windows all complete with 4mm thick glass panes etc. complete. supply of led tube light fittings .make c.g. or philips fixing of led tube light fittings including supply of all hardwares as required. led fitting will be supplied by contractor. make c.g. or philips supply of 48 sweep ceiling fan complete with down rod.clamp canopy etc. fixing of 48 sweep ceiling fan complete with down rod.clamp canopy etc.fan hardwares required for fixing for i.e. nut bolts clamp screws etc wiil be supplied by contractor. supply and fixing of stepped type electronic fan regulator on existing switch board. wiring for light point fan point exhaust fan point with 1.5 sqmm frls pvc insulated copper conductor single core cable in consield with modular switch modular plate suitable gi box and earthing the point with 1.5 sqmm frls pvc insulated copper conductor cable as required. supply of frls pvc insulated copper conducter single core cable of size 6 sqmm. make havells or kei or polycab or national wiring for circuit or submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor single core cable in consield or recessed medium class pvc conduit in concield as required 2 x 6 sqmm plus 1 x 6 sqmm earth wire. all the three colours should be red blue and green supply and fixing of utility db p or s 20a dp metal plug and socket distribution board grey make anchor or havells supply and installation of three phase industrial box with 32 amp 4 pole mcb and 5 pin top plug. make neptune or reputed make supply of frls pvc insulated copper conducter single core cable of size 10 sqmm. make havells or kei or polycab or national wiring for circuit or submain wiring along with earth wire with the following sizes of frls pvc insulated copper conductor single core cable in surface or recessed medium class pvc conduit in concield as required 4 x 10 sqmm + 1 x 10 sqmm earth wire.all the five colours should be red blue yellow black and green preparation of earth pit with supply of all materials including 3m long 3.64mm thick perforted gi tube with salt and charcol in alternate layer and brick chamber at the top with chequered plate 6mm thick as per is 3043 with latest. supply and laying 25mm x 5 mm gi strip at 0.5 meter below ground or wall including connection with electrode with db. supply of all hardware are in scope of contractor supply ans fixing of surface mounting vertical type 415 volts tpn mcb distribution board of sheet steel dust proctected duly power coated painted inclusive 200 amp tinned copper bus bar common neutral link earth bar din bar for mounting mcb with provision of 100 amp tpn mccb as incomer interconnection between incomer mccb and busbar. supply and fixing of 5 to 32 amp rating 240 or 415 volt mcb suitable as per load. supply and fixing of four pole 100 amp rating 415 volt 16 ka mccb . laying of 1.1kv grade pvc al.cable of size 2 or 3 or 3.5 or 4c 2.5 or 6 or 10 or 16 or 25 or 35 sq.mm in underground trench of 760mm deepx760mm wide in single tier formation including trench excavation and back filling with bricks 15brick or m and sand protection route marker. road or concreete or bolder cutting and finishing the road to its original shape are in the scope of the contractor. supply and fixing of street light on wall including supply of all necessaryu hardware for fixing of fitting on wall. supply and fixing of bulk head fitting on wall including supply of all necessaryu hardware for fixing of fitting on wall. supply installation and commissioning of exhaust fan of size 300 mm dia. this includes cutting of wall and finishing and supply of hardware like nut bolts etc. make crompton

Related Searched Keywords : iron concentrate

List of iron-concentrate Tenders

Get iron concentrate Tender Alert...

Related Searched Keywords : iron concentrate

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us