Indian Tenders Tender information of India
Global Tenders International Tender information
Projects Project information of India
Tender Awarded Tender awarded information
Sub-Contractor Vendor information of India
Pay Online
Register now
Login
Contact Info All India : 9276083333 / 9274315555 South India : 9274315555

Filters

List of industrial-facilities Tenders

List of latest industrial-facilities Tenders in Indian Tenders. Click on any industrial-facilities Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for industrial-facilities Tenders.

All-Tenders (197)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

corporations/Associations/Others

TRN :35818337 | 25 Nov, 2025

Tender Value : 1.02 Lacs

Murshidabad - West Bengal

Tender for construction of roof along with plaster, colour and repairing of door and window of icds centre at jemo police fari at ward no.-08 booth no.-163 under apnar para apnar samadhan under kandi municipality.scheme id - apas/01/068/163/0008 construction of roof along with plaster, colour and repairing of door and window of icds centre at jemo police fari at ward no.-08 booth no.-163 under apnar para apnar samadhan under kandi municipality.

corporations/Associations/Others

TRN :35818399 | 17 Nov, 2025

Tender Value : 2.36 Lacs

Namakkal - Tamil Nadu

Tender for providing pcc concrete over damaged roof slab and plastering the ceiling for k.n.patty ae, aee office kalappanaickenpatty ae om, aee om office building

corporations/Associations/Others

TRN :35818778 | 25 Nov, 2025

Tender Value : 1.02 Lacs

Murshidabad - West Bengal

Tender for construction of roof along with plaster, colour and repairing of door and window of ashutosh pry. school at ward no.-09 booth no.-165 under apnar para apnar samadhan under kandi municipality.scheme id - apas/01/068/165/0013 construction of roof along with plaster, colour and repairing of door and window of ashutosh pry. school at ward no.-09 booth no.-165 under apnar para apnar samadhan under kandi municipality.

Central Government/Public Sector

TRN :35819025 | 17 Nov, 2025

Tender Value : 0

Pune - Maharashtra

Tender for gem bids for 0.05 percent halobetasol propionate and 3 percent salicylicacid ointment, acyclovir ophth ointment 3 percent w per win 5 gm tube, adhesive plaster micro porous tape 3 inchesbox of 4, adhesive plaster microporous 1 box of 12, adhesive plaster micro porous tape 2 inches box of 6, adhesive plaster zinc oxide 7.5 cm x 5 mtr, analgesiccream per gel diclofenac pregabalin capsaicin 30 gm tube, antiseptic mouth wash containing sodium fluoride andtriclosan bott of 100 150 ml, band aid adhesive antisepticwater proof 10 x 5 cm, compression elastic bandage fordvt large, battery for glucometer small round 1.5 v, beclomethasone 50 mcg and levosalbutamol 50 mcg permetered dose aerosol 200 dose units, betamethasonedipropionate usp 0.05 mg and gentamycin sulphate 1 mgper gm tube of 5 gm and miconazole nitrate tube of 15 gm, bisacodyl suppositories adult, brimonidine tartrate 0.2percent eye drops, cap biotin 10 mg collegen peptide type1 175 mg konjac powder 20 mg naturat extaractantioxidants and vitamins, cap clindamycin 100 mg andclotrimazole 100 mg vaginal pessary, cap cyclosporin amicro emulsion 25 mg, glucosamine 250 mg andchondroitin sulphate 200 mg cap, isotretinoin 10 mg cap, isotretinoin 20 mg cap, tab itopride 150 mg, omega 3fatty acid 300 mg with antioxidants minerals traceelements and extracts of green tea ginkgo ginseng grapeseed cap, cap pancreatin mini microshphere cont lipase25000 iu, cap silodosin 4 mg, cap tacrolimus 0.25 mg, cap tacrolimus 0.5 mg, thiocolchicoside 8 mg cap per tab, vitamin e 400 mg cap, cap per tab lithium carbonate300 mg, nifedipine retard 20 mg cap per tab, cap pertab pregabalin methylcobalamine 1500 mcg alpha lipoicacid folic acid and vit b6, choline salicylate andbenzalkonium chloride gel of 10 ml mouth ulcer gel, ciprofloxacin hcl 0.3 percent and dexamethasone 0.1percent bott of 5 ml, clindamycin phosphate 1 percenttopical gel tube of 10 gm, clotrimazole 1 percent w per v ipand lignocaine 2 percent w per v ip ear drop bott of 10 ml, clotrimazole 1 percent tube of 15 gm cream, clotrimazolemouth paint 1 percent bottle of 15 ml, compressionstocking medium varicose veins pair, cream acyclovirpercent tube of 5 gm, cream amorolfine 0.25 precent tubeof 30 gm, cream eberconazole 1 percent tube of 10 gm, cream fusidic acid 10 gm, cream hydroquinone 2 percenttretinoin 0.05 percent and fucinolone acetonide 0.01percent tube 20 gms, oint miconazole nitrate 2 percenttube of 15 gm, cream mometasone 0.1 percent and fusidicacid 2 percent, cream prurified water propylene glycolemulsifying wax glycerin cyclomethicone shea butter aloebutter mang butter dimethicone ehtylparaben disodiumedetate zinc oxide fragrance venussia max 150 gm, creamterbinafine hcl 1 percent of 10 gm, cyproheptadine hcl 2mg per 5 ml bott of 100 ml, diclofenac suppositories 100mg //bid details2 / 46

corporations/Associations/Others

TRN :35821153 | 17 Nov, 2025

Tender Value : 0

Ajmer - Rajasthan

Tender for gem bids for ms erw 200nb, ms erw pipe 150 nb, ms erw pipe 50 nb, ms erw pipe 40 nb, ms erw pipe 15 nb, 90 deg elbow200 nb, 45 deg elbow 200 nb, 90 deg elbow gi 150 nb, 90 deg gi elbow 15 nb, 90 deg gi elbow, tee gi 150 nbsch 40, sorf 200 nb150, sorf 40 nb150 cs, swrf 15nb 150, blrf 15 nb 150, supply of blrf 40nb, supply ofblrf 150nb, half coupling 15 nb, nipple oet heavy 15nb, gi tee end thredead 15 nb, tee 15 nb sw, spraynozzle, quartzoid bulb, 15 nb air filter regulator, glycrn ss pre.gauge, supply of flp pressure switch, supply of 24v dc valve, ball valve sw 15 nb 300, gatevalve 150 nb wcb 150, gate valve 200 nb wcb 150, supply of y-strainer 150 nb, stud nut half in 65 mm, stud nut half in 75 mm, stud 3 by4 in 100 mm, stud 3by4 in 110 mm, caf gasket style 20 200 nb, caf gasketstyle 20 150 nb, caf gasket style 20 40 nb, caf gasketstyle 20 15 nb, dismentaling of pipe line, welding ofpipeline, erection of valve nrv strainer, erection of valvestrainer 6 to 8inch, erection of sparay nozzle qb, wrappingcoating of pipeline, surface cleaning painting of pipeline, pipe support supply erection, supply and placement ofreinforcement, supply and placement of insurtplate, excavation of soil upto 1.5 m, excavation of rock withoutblasting, brickwork below and above plinth, plaster 20 mmthk 1 is to 5, pcc, rcc, painting, deluge valve assembly150 nb, commissioning of dv

Central Government/Public Sector

TRN :35822146 | 20 Nov, 2025

Tender Value : 0

Satara - Maharashtra

Tender for gem bids for 1r a test kit latex agglutination 2cough syrup 3rabiesimmunoglobin anti rabies serum inj 2 ml 300iu 2ml 216 1 4antitetanus human immunoglobin inj 250 iu 1 ml vial 2191 5snake venom antiserum lyophilized polyvalent powderfor injection 10 ml d12 6sodium chloride normal saline 09 percent inj i v 100ml 13 7 7potassiun chloride inj 150mg ml 10 ml 258 1 8sodium chloride normal saline 0 9percent iv 500 ml bottle 259 1 9dextrose i v 25 percent100 ml 260 3 10dextrose with normal saline i v 5 percent500 ml bottle 261 1 11ringer lactate i v 500 ml bottle262 1 12multiple electrolytes and dextrose injection type iip for pediatric use 500 ml bottle 263 1 13water forinjection 5 ml 265 1 14sodium bicarbonate inj 7 5 percent10 ml 266 1 15hydrogen peroxide ip 500 ml 420 1 16surgical spirit b p 421 1 17prednisolone tab 5 mg 2541 18hydrocortisone sodium succinate inj 100 mg vial 19dexamethasone inj 4 mg 2 ml 257 2 20surgical bladeno 20 125 box of 100 pcs 21adhesive plaster cottonbased and 40 hypo allergic and 41 7 5 cm x 5 mtr roll 444 1 22bandage cloth as per schedule f ii than 100 cm x 20mtr 453 1 23absorbant surgical gauze 50 cm x 18 mtr 24surgical blade no 11 456 1 25surgical blade no 15 4581 26surgical blade no 22 459 1 27surgical blade no 23460 1 28disposable syringe sterile with needle 1inch 1 ml599 1 29disposable syringe sterile with needle 1inch 2 ml600 1 30disposable syringe sterile with needle 1inch 5 mleach 601 1 31disposable syringe sterile with needle 1inch10 ml 602 1 32disposable syringe sterile with needle1inch 20 ml 603 1 33i v cannula 20g each 473 1 34i vcannula 26g each 476 1 35i v sets with hypodermicneedle 21 g of 1 5 inch length each 481 1 36intercostaldraining system with trocar and bag 28g each 483 1 37intercostal draining system with trocar and bag 32g each bid number gem2025b6849362 dated 05-11-2025 bid document1 84 0 0 484 1, 38.hydrolic ot table, 39.boils appratus withvaporiser, 40.microdrip i v sets with volumetric chambereach 492 1, 41.rolled cotton bandage as per schedule f ii10 cm x 4 mtr roll 503 1, 42.makintosh double colourwater proof rubber width 110cm in meter 511 1, 43.surgical rubber gloves no 6 5 pair 518 1, 44.surgicalrubber gloves no 7 pair 519 1, 45.surgical rubber glovesno 7 5 pair 520 1, 46.polypropelene synthetic monofilamentnonabsorbable mesh 3 x 6 8 cm x 15 cm, 47.triple layerface mask each 573 1, 48.absorable surgical suturesynthetic polyglycolic acid size 1 length90 cm box of 12foils 223, 49.chromic catgut size 1 length 76 cm box of 12foils, 50.chromic catgut size 3 0 box of 12 foils 634 1, 51.chromic catgut size 2 box of 12 foils 635 2, 52.absorable surgical suture synthetic polyglycolic acid size2 0 length 90 cm box of 12 foils, 53.absorable surgicalsuture synthetic polyglactin acid size 1 length 90cm box of12 foils 637 2, 54.absorable surgical suture syntheticpolyglactin acid size 1 0 length 90 cm box of 12 foils 637 3, 55.absorable surgical suture synthetic polyglactin acidsize 2 0 length 90 cm box of 12 foils 637 4, 56.absorablesurgical suture synthetic polyglactin acid size 2 box of 12foils 637 5, 57.absorable surgical suture syntheticpolyglactin acid size 3 0 box of 12 foils 637 6, 58.absorableantibacterial surgical suture 1 half circle ct round and 40polyglycolic and 41 638 2, 59.absorable antibacterialsurgical suture size 1 0 and 40 polyglycolic and 41 638 3, 60.absorable antibacterial surgical suture 1 half circle ctround and 40 polyglactin and 41 638 5, 61.absorableantibacterial surgical suture size 1 0 and 40 polyglactin and41 638 6, 62.absorable antibacterial surgical suture 2 0and 40 polyglactin and 41 638 7, 63.absorable surgicalsuture synthetic polyglycolic acid size 3 0 box of12 foils, 64.nylon monofilament nonabsorbable polymers 50 mm size1 length 150 cm box of 12 foils 642 1, 65.nylonmonofilament nonabsorbable polymers 40 mm size 1 0length 150 cm box of 12 foils 643 1, 66.nylonmonofilament nonabsorbable polymers 50 mm size 2 0 boxof 12 foils, 67.nylon monofilament polymide 3 8 circlecutting needle 30 mm70cm size 3 0 box of 12 foils 645 1, 68.suture needle curved 1 2 circle round body box of 12foils 653 1, 69.suture needle curved and cutting 1 2 circlebox of 12 foils 654 1, 70.inj retiplase 18mg pack of 2 vials18 5, 71.streptokinase inj 15 lac iu vial 157 2, 72.povidone iodine solution 5 percent 500 ml 316 2, 73.clotrimazole cream 1 percent 15 gm 317 1, 74.clotrimazole lotion 1 percent 15 ml 317 2, 75.clotrimazole dusting powder 1 percent 30 gm, 76.whitepetroleum jelly 1 kg 322 1, 77.turpentine oil 500 ml bottle326 1, 78.framycetin sulphate cream 30 gm 327 2, 79.fluconazole ointment tube 15 gm 329 1, 80.silversulphadiazine cream 250 gm 330 1, 81.gamma benzenehydrochloride lotion 100 ml, 82.c arm, 83.benzoic acid 6percent plus salicylic acid ointment 3 percent 50 gm 335 1, 84.fluocinolone ointment 15 gm 336 1, 85.clobetesol ointpropionate 0 05 percent w w 339 1, 86.glycerine 500 mlglass bottle 340 1, 87.anti rabies vaccine id human tissueculture 1 ml, 88.anti rabies vaccine im human tissueculture 1ml, 89.tetanus toxoid 40 adsorbed 41 i p 220 3, 90.rabies human monoclonal antibody r dna origin 100iu 25 ml d80, 91.dengue spot test kit rapid ns1 igg plus igm, 92.urine strips for albumin and sugar, 93.urinestripsketone bodies, 94.digital x ray films 10 x 12 packet of 125films konica, 95.medicine trolly for loding unloding //bid details2 / 84 medicine dh satara 1000 kg, 96.dextrose i v 10 percent500 ml bottle 260 2, 97.gluteraldehyde solution 2 percent5 ltr 267 2, 98.paper adhesive plaster 1inch x 5 mtr roll, 99.autoclave indicator tape 452 1, 100.i v cannula 22geach 474 1, 101.i v cannula 24g each 475 1, 102.surgicalgloves sterile no 7 5 pair 525 1, 103.disp negative suctiondrain set 10g each, 104.disp negative suction drain set16g each, 105.abdominal drain kit no 16 each 547 1, 106.barbor linen thread no 40 reel 562 1, 107.barborlinen thread no 60 reel 562 2, 108.chromic catgut size 10 length 76 cm box of 12 foils, 109.chromic catgut size 20 box of 12 foils 633 1, 110.surgical gloves sterile no 6 5pair 523 1, 111.polypropelene synthetic monofilament size1 box of 12 foils 647 1, 112.polypropelene syntheticmonofilament size 1 0 box of 12 foils 648 1, 113.polypropelene synthetic monofilament size 2 0 box of12 foils 649 1, 114.polypropelene synthetic monofilamentsize 3 0 box of 12 foils 650 1, 115.povidone iodineointment 5 percent 15 gm 316 1, 116.miconazole cream 2percent 15 gm 318 1, 117.noradrenaline inj 2 mg ml 2 ml173 1, 118.vitamine b complex tab 309 2, 119.ascorbicacid vitamin c 500 mg 312 2, 120.coarrogated drainagesheet r564, 121.amino acid iv 200 ml d66, 122.disposable syringe 50 ml 609 1, 123.surgical glovessterile no 7 pair 524 1, 124.midazolam nasal spray 0 5 mg50 ml 18 3, 125.diazepam tab 5 mg 20 1, 126.diazepaminj 5 mg 2 ml amp 20 2, 127.sonography jelly 250 gm 6721, 128.ecg eeg gel 200 gm 673 1, 129.budesonide respsolution 0 5mg 1mg 2ml 12 4, 130.etophylin plustheophylline inj 169 4 mg plus 50 6 mg 2 ml 182 1, 131.salbutamol tab 4 mg 184 1, infant feeding tube v2q2, urine collection bag v2 q2

Central Government/Public Sector

TRN :35822716 | 27 Nov, 2025

Tender Value : 0

New Delhi - Delhi

Tender for gem bids for dental, bid number gem2025b6830044 dated 06-11-2025 bid document1 49 1 1 zirconia reinforced glass ionomer cement for restoration, calcium hydroxide powder, white calcium hydroxide pasteendodontic water based, edta paste, composite syringenano filled, compoules for composite bulk fill, hand piecelubricating oil spray, rvg sleeves disposable, premixtemporary cement zoe based, calcium hydroxide basedcavity liner dycal or equivalent, sodium hypochloriteendodontic, bone graft tcp based tricalcium phosphate, putty based bone graft, endo access bur round safe ended, composite finishing yellow band bur tr 26ef ex 21effo22ef, metal cutting bur tungsten carbide, self sealingsterilization pouch 90x260mm, 300x400mm self sealingsterilization pouch, surgical bur number 702 and 703, barrier film medical grade easy to remove should leave noresidue, benzocaine gel 20 percent flavoured for intra oraluse, c plus readysteel file 10 number 21 or 25mm, sidevented endodontic irrigation needle, conc dotchlorhexidine flavoured for intra oral use calypso orequivalent, impression disinfection spray, retraction pastealuminium chloride based, local anaesthetic cartridgearticaine, 30 gauge short needle for anaesthetic cartridge, 27g long needle for anaesthetic cartridge, dental stonetype iii green, white dental plaster type 2, impressionpaste, cold cure resin pink, temporary crown and bridgematerial bis acrylic composite based should be suppliedwith mixing tips and gun, cold mold seal, glass fibre splint, disposable endobloc autoclavable, bur holder 24holeautoclavable, bioactive dentine substitute, tofflemireretainer with matrix strips, retraction cord nonimpregnated, denture polishing kit acrylic contouring andfinishing kit, tungsten cartridge bur for denture trimming, sx progressive taper rotary files 19mm, paeso reamers32mm, fibre post refills translucent glass fibre, heat cureresin, sand paper mandrel, soft splint sheet, endodonticpaper points f1 and f2, single component light curecomposite based temporary crown material, sectionalmatrix kit complete kit with matrices wedges ring tweezerforceps, all sizes of sectional matrix refills matrices, complete anterior kit for clear matrices including mesialdistal diastema closure matrices wedges etc, clearmatrices refills all types, disposable implant motorirrigation tubing for physiodispensar, pressure indicatingpaste polysiloxane based, endodontic use for mta, mtabased root canal sealer, resin modified glass ionomerrmgi luting cement in clicker dispenser, liquid form resinmodified glass ionomer luting cement in powder and, saddle matrix system, gp solvent for removal of gp andsealer, dental cotton rolls, burs composite finishing burscomplete kit of aluminium oxide stone, composite finishingand polishing strips kit kit with strips coarse medium fineetc, nsk cartridge for air rotor handpiece compatible with, handpiece cartridge for airmotor, cartridge for endo-motorhandpiece compatible with nsk

Corporations And Associations And Others

TRN :35823136 | 14 Nov, 2025

Tender Value : 2.89 Lacs

Machilipatnam - Andhra Pradesh

Tender for providing plastering and beautification by painting of mural arts for the back side of compound wall of mvs naidu park at 44th division

1
2
3
4
5
6
7
8
9
...
20

Related Searched Keywords : industrial facilities

Get industrial facilities Tender Alert...

Related Searched Keywords : industrial facilities

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us

Copyright ©2018 - Thetenders.com.