Filters

List of hex-nut Tenders

List of latest hex-nut Tenders in Indian Tenders. Click on any hex-nut Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for hex-nut Tenders.

All-Tenders (135)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government And Public Sector

TRN :36008932 | 10 Dec, 2025

Tender Value : 0

Palghar - Maharashtra

Tender for gem bids for o-ring part no- 412.01, o-ring part no- 412.02, o-ringpart no- 412.03, casing wear ring part no- 502.01, casingwear ring part no- 502.02, impeller wear ring part no- 503, thrower part no- 507, bearing sleeve part no- 529, bearing cover part no- 360, grooved parallel part no-561.02, parallel pin part no- 562, double flatted nut partno- 920.01, hexagon nut part no- 920.02, lock nut partno- 920.03, hexagon nut part no- 920.04, lock washerpart no- 930.02, lock washer part no- 930.03, parallel keypart no- 940.01, parallel key part no- 940.02, parallel keypart no- 940.03, throtling sleeve part no- 522, couplingpart no- 840

Central Government/Public Sector

TRN :36010301 | 23 Dec, 2025

Tender Value : 0

Ajmer - Rajasthan

Tender for gem bids for spring, slotted set screw flat point m5x10, slotted set screw cone point m5x8, slotted grubscrew g m16x35, hex soc set scr fdp m8x16, sl chhd scr m3x18, sl ch hd scr m4x10 blackened, sl chhd scr m5x10 blackened, soc hd cap scr m8x25, sochd cap scr m12x60, sl csk hd scr m5x10 blackened, sq head scr m6 x 20, hex hd scr m8x25, springwasher b 8, cyl pin 8x55, cyl pin m6 4x25mm, cyl pinm6 4x35mm, cyl pin m6 8x24mm, taper pin 6x55, hammer drive scr 2x6 4, knurled nut m 10, knurledknob dia 8, knurled knob dia 10, eye bolt m10x55, tbolt m8x70, t bolt m10x45, reinforced flexablepvc dia 2 5x6 0 mtr, elbow red a1 3by 4inchx1by2inch, reduction piece 1by 2x1by 4, foundetionbolt with nut m16x200, foundation bolt m20x320with nutby washer, ch hd scr am4x10 brass withnickle plat, ch hd scr m5x10

Central Government/Public Sector

TRN :36010719 | 23 Dec, 2025

Tender Value : 0

Ajmer - Rajasthan

Tender for gem bids for thd taper pin dia 8x50, cyl scr plug m12x1, union g1 by 4 inch, c1rclip exta 4mm, taper pin 6x26, compspring c7 0 dot 41x6h14x20, tension spring 27 c7, pin sr dia6x10, comp spring, through cock bsp 1 by2 inch, through cock bsp 3 by 4 inch, hex nut m14hard hex face surface hard, washer m12, dustcover sy rubber, hose 100r3 10x300, connectionpipe g 1 inch x200, red elbow 1inch x 1 by 2, straight couplin d18l, taper male stud elbowcoupling bsp ex18l, jerrycan 5 ltr, jerry can 25 lit, jerrycan 40 ltr, jerrycan 50 lit, knurled nut m 10, stud m 10 x 90, star grip dia 60 mm c i finished, eyebolt m 10 x 70, wire net, ball valve bsp 3 by 4, cuphd coach bolt m16 x 70, conn pipe bsp 1 inch x 120, foundation bolts with nut m16 x 200, hex screw m12 x 60 full thread, ball valve bsp 1 inch dn 25, ball valve half inch, hose 100r3 6x1500, hose100r3 4 x 800, push in thread fittings

corporations/Associations/Others

TRN :36010990 | 20 Dec, 2025

Tender Value : 0

Cuddalore - Tamil Nadu

Tender for gem bids for cold forged high tensile fully threaded, cold forged hightensile fully threaded hex, cold forged high tensile fullythreaded hex head, cold forged high tensile fully threadedhex head bolt, mild steel hex head bolt and nut

corporations/Associations/Others

TRN :36011148 | 12 Dec, 2025

Tender Value : 0

Bacheli - Chhattisgarh

Tender for gem bids for 1700005407 ht csk bolt with nut m20x80, 1700007840round hd with sq neck ht bolt with nylock nut m20 x 120, 1700007384 ht hex bolt nut and washer m20 x 120, 1700010584 ms washer m20, 1600198239 amplitudelimiter

Central Government/Public Sector

TRN :35996993 | 11 Dec, 2025

Tender Value : 40.00 Lacs

Surat - Gujarat

Tender for gem bids for austin moore pins with 2 nuts , bipolar xl , cement ristrictor , c c screw , washer , lag screw , d h s plate , angle blade pate , tubular plate , d c plate , hook plate , l c d c plate , oblique t plate , reconstruction plate , olecranon plate , semi tubular plate , narrow d c plate , narrow l c d c plate , broad d c plate , bone screw , cortical screw , cancellous screw hex , bolts , i l bolt , harbert screw , intramedullary nails , interlocking nail , rush nail , square nail

Central Government/Public Sector

TRN :35997380 | 22 Dec, 2025

Tender Value : 0

Lucknow - Uttar Pradesh

Tender for supply of hex nut m30 high tensile for lhb/fiat bogie

corporations/Associations/Others

TRN :35999090 | 01 Jan, 2026

Tender Value : 0

Sonebhadra - Uttar Pradesh

Tender for supply of miscellaneous items - ht hex head full thread nut & bolt ; m16x65 mm, ht hex head full thread nut & bolt ; m16x70 mm, hthh bolt with nut & washer , half threaded m16x90 hex hd m18x70; ht 10.9 grade ms bolt & nut size 20x70 mm ht hex bolt & nut 20x80fth fluidizing pads for esp hoppers, size: 374 mm x 374 mm, no. of holes: 16, hole dia: 12 mm material: nomex (as per sample) "perforated ms plate, size: 374 mm x 374 mm, having 4.76 mm dia holes at 7.14 mm pitch giving 40.5 % open area plate thickness: 1.6 mm, no. of mounting holes: 16, hole dia: 12 mm (as per sample)" "submersible pump, make-kirloskar, model-eterna 1100 cw+ specification : power supply-415v, 3phaseac power rating-1.1kw/1.5hp max. solid handling size (mm) - 24 minimum submergence (mm) - 460 suction - from bottom size discharge outlet (mm) - 50 max. amb. temperature - 40 degree c discharge 366 to 84 lpm total head - 6 to 14 mtrs speed (nominal) 2800 rpm" "discharge tube with fmb(foam making branch) for mechanical foam extinguisher 50 ltr. discharge tube shall be braided rubber plastic of 3.5 mtr length & 12.5 mm internal dia. fitted with plastic fmb (is-7328) as per is-13386 the discharge hose shall have bu sting pressure of not less than 50 kg/cm². (as per sample)" "discharge tube for dcp(dry chemical powder) 05 kg extinguisher (plunger type). made of pvc. one end thread is provided to fit with dcp fire extinguisher (plunger type) capacity 5 kg and other end to discharge powder.(as per sample)" "discharge tube washer for dcp(dry chemical powder) 05 kg extinguisher (plunger type). made of rubber suitable to be fitted with discharge tube of dcp fire extinguisher (plunger type) capacity 05 kg.(as per sample)" "discharge tube for dcp(dry chemical powder) 10 kg extinguisher (plunger type). made of pvc. one end thread is provided to fit with dcp fire extinguisher (plunger type) capacity 10 kg and other end to discharge powder.(as per sample)" "discharge tube washer for dcp(dry chemical powder) 10 kg extinguisher (plunger type). made of rubber suitable to be fitted with discharge tube of dcp fire extinguisher (plunger type) capacity 10 kg.(as per sample)" "cap rubber washer for dcp(dry chemical powder) 75 kg extinguishers.made of rubber, suitable to fit in the cap assembly of dcp fire extinguisher capacity 75 kg.(as per sample)" "discharge tube for dcp 75 kg extinguishers. discharge tube/hose with nozzle squeeze grip aluminum lengths -5 mtr. suitable for dcp type fire extinguisher capacity-75 kg.(as per sample)" "washer for copper connecting tube 75kg dcp(dry chemical powder) extinguisher. made of rubber. suitable for fitting with copper conne cting tube of dcp 75 kg extinguisher.(as per sample)" "discharge tube for 9 ltr water type extinguishers (squeeze grip type). pvc braided tube/hose of length 400 mm. suitable for fitting within the thread of squeeze grip assembly of water type fire extinguisher capacity 9 litre (squeeze grip type).(as per sample)" "discharge tube washer for 9 ltr water type extinguishers (squeeze type). made of rubber. suitable to be fitted with discharge tube/hose of water type fire extinguisher (squeeze grip type) capacity 09 litre.(as per sample)" "port tube for 9 ltr water type extinguishers (squeeze grip type). port tube/actuator should be made of aluminium. suitable to fit inside cap assembly of water type fire extinguisher capacity 9 litre (squeeze grip type) for release of water when activated. as per sample)" "siphon tube for 9 ltr water type extinguishers (squeeze grip type). siphon tube suitable for 9 ltr. water type extinguishers (squeeze grip type).(as per sample)" "cap assembly for 9ltr water type extinguishers (squeeze grip type). it should include a brass forged valve and a squeeze grip for activation to facilitate the discharge of water. suitable to be fitted in 9l water type extinguishers (squeeze grip type).(as per sample)" "cap assembly washer for for 9 ltr water type extinguishers (squeeze grip type). as per is-15683 the washer shall be ring type make with synthetic rubber which outer dia. 65mm and inner dia. should be 55mm.(as per sample)" "port tube for 9 ltr mechanicl foam type extinguishers (squeeze grip type). port tube/actuator should be made of aluminium. suitable to fit inside cap assembly of foam type fire extinguisher capacity 9 litre (squeeze grip type) for release of extinguishing agent when activated.(as per sample)" "siphon tube for 9 ltr mechanical foam type extinguishers (squeeze grip type). siphon tube suitable for 9ltr. mechanical foam type extinguishers (squeeze grip type).(as per sample)" "carrying handle for co2 4.5 kg extinguishers. carrying handie should be made of mild steel and coated/covered with pvc, suitable to carry co2 4.5 kg extinguishers.(as per sample)" "discharge tube with horn for co2 22.5 kg extinguishers. discharge tube should be braided rubber plastic of 05 mtr. length & 10 mm internal dia, fitted with discharge horn, should be non conductor of electricity like polyethylene, fibre glass, with suitabl handle as per is-2878. the minimum bursting pressure shall be 275 kg/cm² in control discharge.(as per sample)" "discharge tube washer for co2 22.5 kg extinguishers.#made of pvc. suitable to be fitted with discharge tube of co2 22.5 kg extinguishers.(as per sample)" "discharge tube for dcp(dry chemical powder) 05 kg extinguisher (squeeze grip type). pvc braided tube/hose of length 400 mm. suitable for fitting within the thread of squeeze grip assembly of dcp type fire extinguisher capacity 05 kg. (squeeze grip type),( s per sample)" "discharge tube washer for dcp 05 kg extinguisher (squeeze grip type). made of rubber, suitable to be fitted with discharge tube of dcp fire extinguisher (squeeze grip type) capacity 05 kg.(as per sample)" "port tube for dcp(dry chemical powder) 05 kg type extinguishers (squeeze grip type).#port tube/actuator should be made of aluminium. suitable to fit inside cap assembly of dcp fire extinguisher capacity 05 kg. (squeeze grip type) for release of dcp when a ivated.(as per sample)" "siphon tube for dcp(dry chemical powder) 05 kg type extinguishers (squeeze grip type). siphon tube suitable for dcp 05 kg type extin guishers (squeeze grip type).(as per sample)" "cap assembly for dcp(dry chemical powder) 05 kg type extinguishers (squeeze grip type). it should include a brass forged valve and a squeeze grip for activation to facilitate the discharge of dcp. suitable to be fitted in dcp 05 kg type extinguishers (squeze grip type).(as per sample)" "cap assembly washer for dcp(dry chemical powder) 05 kg type extinguishers (squeeze grip type).#made of rubber. suitable to be fitted in washer dcp 05 kg type extinguishers (squeeze grip type).(as per sample)" .

Central Government / Public Sector

TRN :35999304 | 12 Dec, 2025

Tender Value : 0

Kazipet - Telangana

Tender for supply of set of hex head bolts and nuts

Central Government / Public Sector

TRN :35999534 | 15 Dec, 2025

Tender Value : 0

Guntakal - Andhra Pradesh

Tender for supply of hex. head bolt m22 x 200mm & nut (for draw bar arrangement) to ryps drg. no. ryps/scr/c&w/sk-0261, item - 4, alt-nil.

Related Searched Keywords : hex nut

List of hex-nut Tenders

Tender for gem bids for cold forged high tensile fully threaded, cold forged hightensile fully threaded hex, cold forged high tensile fullythreaded hex head, cold forged high tensile fully threadedhex head bolt, mild steel hex head bolt and nut

Tender for gem bids for 1700005407 ht csk bolt with nut m20x80, 1700007840round hd with sq neck ht bolt with nylock nut m20 x 120, 1700007384 ht hex bolt nut and washer m20 x 120, 1700010584 ms washer m20, 1600198239 amplitudelimiter

Tender for supply of hex nut m30 high tensile for lhb/fiat bogie

Tender for supply of set of hex head bolts and nuts

Tender for supply of hex. head bolt m22 x 200mm & nut (for draw bar arrangement) to ryps drg. no. ryps/scr/c&w/sk-0261, item - 4, alt-nil.

Get hex nut Tender Alert...

Related Searched Keywords : hex nut

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us