Filters

List of guide-wall Tenders

List of latest guide-wall Tenders in Indian Tenders. Click on any guide-wall Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for guide-wall Tenders.

All-Tenders (7)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

corporations/Associations/Others

TRN :49020052 | 10 May, 2025

Tender Value : 10.53 Lacs

Kanpur - Uttar Pradesh

Tender for tender for construction of teen shade at vill driyapur block sumerpur hamirpur. - clearing of jungle including up rootingof trunkvegetarian grass bushetc dsr 2.32 2 earth work by mechinical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift:d.s.r code no-2.8.1 3 earthwork in cutting or filling in ordinary soil form 3k.m.i/c all complete work 4 sand filling in plinth under floors including watering, ramming, consolidating and dressing complete including lead up to 50m and lift upto 1.5m and including cost of sand.dsr.2.27 5 p/l in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level 1:4:8 (1 cement: 4 coarse sand (zone-iii) derived from natural sources:8 graded stone aggregate40 mm nominal sizederived from natural sources .d.s.r code no-4.1.8 6 m-150 brick work in 1:6cement & c. sand mortar in foundation and plinth…complete item. d.sr-6.1.2 7 12 mm cement plaster thick 1:4 cement and coarse sand fair side single and half brick wall including internal rounded angles chamfers and or rounded angles not exceeding 80 mm in grith and finished even and smooth. dsr no-13.4.1 8 providing and laying of 8 to 10 mm thick ivory or light shade vitrified tiles of 600 mm x600 mm size in flooring or skirt ing laid with 1:3 cement mortar (1 cement :3 coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour t &p required for proper completion of work. dsr .11.41.2 9 providing and laying in position specified grade of reinforcement cement concrete,excluding the cost of centering, shuttering, finishing and reinforcement of r.c.c 1:1.5:3 with cement coarse sand .column t beam slab as dsr no-5.1.2 10 m.s (tor steel or plain ) in plain work such as r.c.c or r.b work including cutting / bending for proper shape as necessary including supply of all steel & wastage ,bend ,hook & authorised overlapping shall be measured … complete item.dsr 5.22.1 11 cement concrete floorig 1:2:4 ( 1 cement 2 coarse sand 4graded stone aggregate) finished with a floating coat of neat cement,including cement slurry,excluding the cost of nosing of steps etc complete 40 mm thick with 20 mm nominal size stone aggregate dsr.11.3.1 12 steelwork inbuilt up tubular(round,square or ractangular hollow tubes etc)trusses etc including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer includingweldingand bolted with with special shaped washers etc all complete.dsr-10.16.2 13 s/f of ms j-hook 16 mm dia i/c all complete work 14 providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by engineerin- charge. the sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with epdm seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(0.63 mm thick sheet) dsr.12.1.3 15 finishing walls with two coat ofpremium acrylicemulsion smooth exterior paint of best quality supply of all materials,labour and t&p etc dsr no 13.48.a.1 16 painting with synthatic eleamin paint of approved and manufactore of reqquierd colour to give an even shade. two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture dsr.13.62.1 17 s/f of 4x2.5 feet size granite stone at siteincluding writing etc complete in all respect

State Government

TRN :49023008 | 15 May, 2025

Tender Value : 97.85 Lacs

Gautam Buddha Nagar - Uttar Pradesh

Tender for tender for landscaping of park p-1 sector -28 with two year maintenance yeida. wc-h - clearing grass and removal of the rubbish up to a distance of 50 m out side the periphery of the area cleared. 2 ploughing the existing ground to a depth of 15cm to 25cm and watering the same . 3 rough dressing the trenched ground including breaking clods. 4 uprooting weeds from the trenched area after 10 to 15days of its foolding with water including disposal of uprooted vegetation. 5 fine dressing of the ground. 6 digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ration of 2:1 by volume ( part of stacked volume of earth afte reduction by 20% : 1 part of stacked volume of manure after reduction by 8% ) follding with water dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) 7 holes 60cm dia, and 60cm deep 8 holes 45cm dia and 45cm deep 9 supplying of chlorpyriphos 20% e.c/ lindane 20% e.c for anti termite treatment of plants @ 2ml./plant and in the interval 1 month up to one year i.e, 12 times in a year hence it comes 24ml/plant or 0.024ltr/plant. 10 supply and stacking of well decayed cattle manure at site including roylty and carriagge up to 5km lead complete. ( cattle manure measured in stacks will reduced by 8% for payment) 11 spreading sludge dump manure and/ or good earth in required thickness as per direction of officer in charge ( cost of sludge, dump manure and/ or directed by the officer in charge. 12 mixing earth and sludge or manure in the required proportion specified or directed by the officer in charge. 13 supply and stacking of selection no. 1/doob grass at site fresh & free from weeds having proper roots in green including loading, unloading carriage and all taxes paid etc. and as per direction of officer in charge. 14 grassing with selection no. 1/ doob grasss including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed ( the grass and good earth shal be paid for separately). 15 preparation of beds for hedging and shurbbery by excavation 60 cm deep and trenching the excavated base to a further depth of 30cm, fefilling the excavated earth after breaking clods and mixing with sludge or mnaure in the ratio of 8:1 (part of stacked volume of earth after reductin by 20% : one part of stacked volume of sludge or manure after reduction by 8% ), flooding with water, filling with earth if necessary watering ad finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as derected within a lead of 50m lift up to 1.5m complete (cost of sludge, manure or extra a lead of 50m, lift up to 1.5m complete (cost of sludge, manure or extra earth to be paid for separately) 16 providing and stacking of duranta golden having ht. 15 to 20cm bushty shape with fresh and healthy leaves in 15cm size of earthen pot/plastic pot & as per direction of the officer in charge. (dsr-18, 6.12pg. no.153) 17 providing and stacking of fucus panda golden of height 45-60cm with 6-7 branches and healthy foliage in p.bag of size 25cm as per direction of the officer in charge. (dsr-18, 8.27pg. no.175) 18 supply of gypsm well packed at site in bags. 19 supply of dap at site in printed plasic bags. (market rate.) 20 supply & planting of plants common varieties as required by engineering incharge in 5 kg poly bags or earthen pots ( not below than 8-10 ) well branched and fully foliage branching dia 0.75 to 1.00mtr. free from disease at site i/c stacking with bamboos(chakresia, site ashok, kusum, gulmohar, amaltash) 21 providing and displaying ficus retusa topiary wall developed with fresh and healthy 5 to 6 big ball spedific size and shape 180 cm to 210cm g in 40cm cement potas per direction of the officer in charge (dsr-18, 5.24 pg. no. 145) 22 providing and stacking of bottle palm of ht. 270-300cm bottom girth 30-35cm well developed in big hdpe bags 23 supply & planting of shrubs plants height 2-2.5 feet as required by engineering incharge in 6x8 polythene bags or earthen pot fully foliage and well branched free from disease. shrubs (himalia, chandni ticomaor as direction by e/i etc.) 24 providing and displaying furcaria variegated hybrid well developed with fresh and healthy foliage 20cm and above atractive leaves in 35cm cement potas per direction of the officer in charge (dsr-18, 5.31pg. no. 147) 25 providing and stacking of alternanthera species of height 15cm to 20cm full of brnaches and foliages in 15cm size of earthen pot/plastic pot & as per direction of the officer in charge. (dsr-18, 6.20pg. no. 153) 26 providing and stacking of lpomea (golden leaves) with fresh and healthy leaves in 15cm size of earthen pot/plastic pot & as per direction of the officer in charge. 27 providing and stacking of syngonium (butterfly) variegated with 2-3 suckers healthy foliage in earthen pot/plastic pot as per direction of the officer in charge.(dsr-18, 6.15pg. no.153) 28 providing and stacking of wedelia trilobata, full of leaves in 15cm size of poly bags & as per direction of the officer in charge.(dsr-18, 6.26pg. no.153) 29 providing and stacking of pinus longifolia (pinus) of height 90-105cm in cement pot of size 35cm as per direction of the officer in charge (dsr-18, 7.65 pg. no.165) 30 earth work in excavation by mechanical means (hydraulic excavator) manual means in foundation trenches or drains ( not exceeding 1.5m in width or 10sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50mall kinds of soil 31 providing laying, jointing and testing of pvc(finolex make ring fit) of following dia 6kh/cm2 including all specials & fittings etc. as required for proper completion of work (the contractor has to arrange the source of water and require head for testing). (ar/yeida). 32 providing and fixing of hydrant with gate valve and all the fittings etc. complete. 32mm dia 33 complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, hergs, edge, flower beds, foliages, creepers etc. including hoeing, weeding, purning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers ( whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office in charge ( cost of good earth, manure , fertilizer, insecticide pesticide will be provided by the department & lawn mover and brush cutter with fuel and other t & p material / articles shall be provided by the contractor.) and as per direction of officer in charge. 34 play grounds/public parks ( mali for 2.00acre.) 35 boring of tubewell with: supplying assembling, lowering and fixing in vertical position in bore well, unplasticized pvc medium well casing (cm) pipe of required dia, conforming to is: 12818 , including required hire and labour charges, fittings & accessories etc. all complete for all depths, as per direction of engineer in charge. 36 providing profuse watering arrangement for lawn/park at site to make avialable for irrigation i.e. diesel engien & oil etc, rh pipe/ canvas pip & other t&p etc. in the proces of watering submerisible pump & accessories as per direction of officer in charge of work. 37 preparation of mounds of various size and shape by available excavated/supplied earth in layers not exceeding 20cm in depth breaking clods, watering of each layer dressing etc, lead upto 50mtr and lift upto 1.5m complete as per direction of officer in charge. 38 supply ofgood earth work , banking excavaated earth in layers not exceeding 20 cm in depth, breaking clods watering, rolling each layer with 1/2 tonnes roller or wooden or steel rammerand dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, all leads as per(a.r. )for all kind of soil. 39 plantation of seasonal two times on road side (0.45mtrwide bed) including making of bedas direction of engineer in charge complete item. 40 providing of seasonal seedlings including supply of seasonal seedling labour etc complete. 41 m/o seasonal/hedge of ground cover park including weeding hoeing and puring cutting in required shape etc. of ground bed complete itemand watering of seasoanl flowersincluding source of water pol etc. complete. 42 chair bench: supply of rcc chair bench with back rest of size 1500mm width x 1000mm height. reinforced suitably to promote long use and to prevent damage during handling, transportation, & erection. manufactured by using m-30 grade of concrete. 43 supply and fixing of dustbin set of 3capacity-80 ltr size -400x400 top , 300x 300 botto,, 900mm ht. stand made up of isi marked sq , pipe of 35mm x 35mm x 18 gauge power coated size-4.5’ x 1.5’ x 750mm(all complete) (as approved by e&i) 44 providing and laying in position cement concrete of specified grade excluding grade excluding the cost of centering and shuttering all work up to plinth level 1:2:4 corse sand 20 mm stone aggregate (sor based on dar 18 / 4.1.13)

Central Government/Public Sector

TRN :49029332 | 01 Jan, 0001

Tender Value : 0

Halisahar - West Bengal

Tender for auction sale of allocation no.21213304.on as is where is basis. iron and steel cut-up parts of condemned conventional coach body with condemned bogies, bearing no. er/032703, type-gslrd, make-icf. qty.-01no. location-c and w extension yard/kpa. to be sold along with 02 nos. of cond. bogies with all available fittings including unserviceable helical spring but without excluded fittings. excluded fittings/items are 04 nos. of wheel sets with its fittings and nonferrous attachment if any are excluded from sale and will be returned to the custodian as per extent procedure. approx saleable weights of condemned conventional coach are included with the un-serviceable items, ferrous-iron, n- ferrous/ other?s items .i.e. un-serviceable aluminium window guide frame- (nil), un-serviceable aluminium checker plate-( nil), un-serviceable aluminium cable-(nil), s/s wash basin-( nil), s/s floor-(approx 768kg.), ss sheet-(nil), lp sheet, pvc sheet, compreg sheet, coir, rexin, frp moulding, glass, wood, unserviceable bogie fittings, helical springs etc. approx weight of lp sheet, pvc sheet, compreg sheet, coir, rexin, frp moulding, glass, wood are approx.[nil] . nb: 100% of lp, pvc, compreg sheet, coir, rexin, frp moulding, glass, wood etc. 04 nos of ss wash basin, 02 nos. of screw coupler, 2 no. step hanger, 16 nos. of window guide frame, 64 nos of window rods, 06 nos of bs doors, 04 nos of sliding door, approx. 70 kg. inner seat, approx. 20 kg. side seat, approx. 70 kg. luggage rake, approx. 200kg. of bottom plate, approx. 300kg. of end wall panel are deficient. condition- [1] after sale, coach will be handed over to the purchaser for dismantling and cutting at c&w extension yard/kpa. [2] cutting and dismantling of coach are to be made at c&w extension yard/kpa by purchasers own arrangement after ensuring sufficient safety measures against fire hazards. [3]excluded fittings available in the said coach are to be returned to the custodian, before delivery.

State Government

TRN :49029493 | 15 May, 2025

Tender Value : 32.33 Lacs

Gautam Buddha Nagar - Uttar Pradesh

Tender for construction of e-library room in village begmabad yea. wc-06 - earth work in excavation in ordinary soil in all of foundation trenches including dressing of the side and ramming of bottom.lifts up to 1.50 m including getting out theexcavated soil and disposal of surplus excavated soil as directed with in a lead of 50m. (most/a.r./yeida) 2 supplying chemical emulsion in sealed containers including delivery as specified. chlorpyriphos/ lindane emulsifiable concentrate of 20%. (dar/2.34.1/based on uppwd/sor-2020)) 3 diluting and injecting chemical emulsion for post-constructional anti-termite treatment (excluding the cost of chemical emulsion) : treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 coarse sand) to match the existing floor: with chlorpyriphos/lindane e.c. 20% with 1% concentration (dar/2.35.3.1/based on uppwd/sor-2020)) 4 2.5 cm thick damp proof course with cement and approved coarse sand 1:1½ with and including water proofing as ordered by the engineer incharge in the proportion as specified by the manufacturer including supply of all materials, labour, tools & plants etc. required for proper completion of the work and including proper curing & shutterings as necessary. (uppwd/sor-2020/361) 5 applying a coat of residual petroleum bitumen of grade of vg-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. 6 cement concrete with 4cmgauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all material, labour, tools&plants etc required for proper completion of the work. 7 b/w with bricks of class 150 in foundation & plinth in cm 1:4 (based on up pwd sor 2020) cement mortar 1:4 ( 1cement :4coarse sand) 8 m-150 brick work in 1:4 one cement and four course sand 2.20 f.m. mortar superstructure but for walls of half brick thick including supply of all material, labour, t&p etc. required for proper completion of the work. (uppwd/sor-2020/305(a)+310a 9 m-150 brick work in 1:4 one cement and four course sand 2.20 f.m. mortar superstructure but for walls of half brick thick including supply of all material, labour, t&p etc. required for proper completion of the work. (uppwd/sor-2020/305(a)+310a 10 extra for providing and placing in position 2 nos 6mm dia. m.s. bars at every third course of half brick masonry.uppwd-sor-2020-dar-18/6.15/ 11 providing and laying in position machine batched and machine mixed design mix m-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-in-charge. (note :- cement content considered in this item is @ 330 kg/cum. excess/ less cement used as per design mix is payable/recoverable separately). all works upto plinth level 12 providing and laying in position machine batched and machine mixed design mix m-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per is: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of engineer-in-charge. (note :- cement content considered in this item is @ 330 kg/cum. excess/ less cement used as per design mix is payable/recoverable separately).all works above plinth level upto floor v level 13 centringand shutteringincluding strutting, propping etc. andremoval of form for : foundation footings, base of column 14 centringand shutteringincluding strutting, propping etc. andremoval of form for : lintels, beams, plinth beam, grinder 15 centringand shutteringincluding strutting, propping etc. andremoval of form for : suspended floors, roofs, landings 16 columns, pillars, piers, abutments, posts and struts. (dar/5.9.6/based on uppwd/sor-2020)) 17 edges of slabs and breaks in floors and walls:under 20 cms wide. (dar/5.9.16.1/based on uppwd/sor-2020)) 18 earth work in rough excavation , banking excavaated earth in layers not exceeding 20 cm in depth, breaking clods watering, rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, all leads as per(a.r. )for all kind of soil. 19 steel rainforcement for r.c.c. work including straightening, cutting bending, placing in position and binding all complete upto plinth level thermo-mechanically treated bars of grade fe-500d or more./cold twisted bars. (dar/5.22.6/based on uppwd/sor-2020)) 20 12mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand)based on up pwd sor 2020 dar-18/13.4.2 21 6mm cement plaster of mix: 1:3 (1 cement : 3 coarse sand)based on up pwd sor 2020 dar-18/13.17 22 15mm cement plaster of mix: 1:6 (1 cement : 6 coarse sand)based on up pwd sor 2020 dar-18/13.4.2 23 finishing walls with acrylic smooth exterior paint of required shade: new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). 24 distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade 25 providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.dar-18/13.26 26 painting with synthetic enemel paint of approved brand and manufacture to give an even shade: two or more coats on new work. 27 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 110mm dia 28 providing and fixing on wall face unplasticised - pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. single tee with door 110x110x110 mm (dar/12.42.3.2/based on uppwd/sor-2020) 29 bend 87.5° 110 mm bend (dar/12.42.5.2/based on uppwd/sor-2020) 30 shoe (plain) 110 mm shoe (dar/12.42.6.2/based on uppwd/sor-2020) 31 providing and fixing unplasticised -pvc pipe clips of approved design to unplasticised - pvc rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with m.s. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm (dar/12.43.2/based on uppwd/sor-2020) 32 providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.(dar/12.44/based on uppwd/sor-2020) 33 steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.dar-18/10.25.2 34 providing and fixing water closet squatting pan (indian type w.c. pan with 100mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required white vitreous china orissa pattern w.c. pan of size 580x440mm with integral type foot rests.up pwd sor-2020-dar 18/17.1.1 35 providing and fixing wash basin with c.l. brackets, 15 mm c.p. brass pillar taps,32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:uppwd sor-2020-dar 17.7.1 36 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge.20mm od pipes. (dar/18.8.2/based on uppwd/sor-2020) 37 25mm od pipes. (dar/18.8.3/based on uppwd/sor-2020) 38 providing and fixingbrass gate valve with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore. (dar/18.17.1/based on uppwd/sor-2020) 39 32 mm nominal bore. (dar/18.17.2/based on uppwd/sor-2020) 40 providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) applying a slurry coat of neat cement using 2.75 kg/sqm. of cement admixed with water proofing compound conforming to is. 2645 and approved by engineer-in-charge over the rcc slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) laying brick bats with mortar using broken bricks/brick bats 25 mm to 115mm size with 50% of cement mortar 1:5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to is : 2645 and approved by engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to is : 2645 and approved by engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) after two days of proper curing applying a second coat of cement slurry using 2.75kg! sqm of cement admixed with water proofing compound conforming to is : 2645 and approved by engineer-in-charge. d) finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement: 4 coarse sand) admixed with water proofing compound conforming to is: 2645 and approved by engineer-in-charge including laying glass fibre doth of approved quality in top layer of plaster and finally finishing the surface with trowe’ with neat cement suvr an making pattern ot 300x300 mm square 3mm deep. e) the whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. all above operations to be done in order and as directed and specified by the engineer-in-charge: dar18/22.7.1 41 providing and placing on terrace (at all floor levels) polyethylene water storage tank isi: 12701 marked with cover and suttable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank dar 18/ 18.48 42 making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - iii) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.(dar 2018-4.17)based on uppwd sor/2020 43 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600mm (dar/11.41.2/based on uppwd/sor-2020)) 44 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (dar/8.31/based on uppwd/sor-2020)) 45 providing and fixing brass bib cock of approved quality: 15 mm nominal bore (dar/18.15.1/based on uppwd/sor-2020)) 46 providing and fixingbrass gate valve with c.i. wheel of approved quality (screwed end) : 25 mm nominal bore. (dar/18.17.1/based on uppwd/sor-2020) 47 providing and fixing nahani trap 75x100mmincluding all complete. 48 20 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand-dar-18/13.6.1/p-902 49 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30mm thick including isi marked stainless steel butt hinges with necessary screws. (dar/9.21.2/based on uppwd/sor-2020)) 50 extra for providing isi marked stainless steel butt hinges instead of m.s. pressed butt hinges bright finished of required size with necessary screws. (shutter area to be measured). (dar/9.14/based on uppwd/sor-2020)) 51 renewing panes of glass in door, window & ventilators or fixing in the new work with 3mm thick glass panes fixed with brads & putty includung supply of all material , labour , tools & plants required for proper completion of workuppwd sor 2020/p26/806 52 prroviding and fixing isi mark 3 layer prelaminated particle board conforming to grade 2 type-iii of is-12823/20b laminated with 0.6-0.8 mm thick laminate conforming to is-2046/1995 and balancing lamination of 0.5 mm thick on the back side (size 700750430) including all complete 53 supply of work sb collection office/visitor chain with sheat dxwxh 400400450 mm padded with polyurithane foam complete 54 supply wook at site sb collection executive table of 3 layer prelaminated particle board (wood product) of grade 2 type 2 of is-12823/latest 1830 mm 950 mm 750mm including all complete 55 supplying and filling in plinth with jamuna sand under floors, including watering, ramming, consolidating and dressing complete. dar-18/2.27 56 providing and fixing factory made isi marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as f7d, f4b, k11 b and k12 b etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of c.c. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 57 constructing brick masonry road gully chamber 50x45x60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast r.c.c. horizontal grating with frame complete as per standard design with common burnt clay f.p.s. (non modular) bricks of class designation 7.5.(dar/18.33.1/based on uppwd/sor-2020) 58 providing, laying and jointing glazed stoneware pipes class sp-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : (dar/19.1.1/based on uppwd/sor-2020) 59 providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round s.w. pipes including bed concrete as per standard design : (dar/19.2.2/based on uppwd/sor-2020) 60 providing and fixing square-mouth s.w. gully trap class sp-1 complete withc.i. grating brick masonry chamber with water tight c.i. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: (dar/19.4.1/based on uppwd/sor-2020) 61 providing and fixing heavy class ss gratingof approved design including setting in floor with cement motor to match with floor finish as per architect requirement suitable for waster and ft, ut & fd.size 150 mm x 150 mm 62 providing and fixing ptmt towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.(dar/17.73.2/based on uppwd/sor-2020)) 63 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. (dar/17.31/based on uppwd/sor-2020)) 64 providing and fixing ptmt soap dish holder having length of 138mm, breadth102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. (dar/18.65/based on uppwd/sor-2020)) 65 providing and fixing chicken wire mesh (murga jali) 24 gauge and 20 mesh at junction of rcc and masonry walls including fixing in position with steel nails of 25 mm in length as approved at required as directed by engineer-in-charge, scaffolding etc. complete. (ar/yeida//based on uppwd/sor-2020))½x24 gauge 66 providing and fixing aluminium hanging floor door stopper, isi marked, anodised (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.(dar/9.101.1/based on uppwd/sor-2020))single rubber stopper 67 providing and fixing aluminium tower bolts, isi marked, anodised (anodic coating not less than grade ac 10 as per is : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:250x10mm(dar/9.97.2/based on uppwd/sor-2020)) 68 providing and fixing aluminium handles,isi marked, anodised (anodic coating not less than grade ac 10 as per is: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete.125 mm (dar/9.100.1/based on uppwd/sor-2020)) 69 providing and fixing ptmt extension nipple for water tank pipe, fittings of approved quality and colour.25mm nominal bore, weighing not less than 62 gms. (dar/18.75.3/based on uppwd/sor-2020)) 70 providing & fixing of cp heavy duty bottle trap 32mm. (complete complying with relavent standard specification and as directed by the competent authority.) for wash basin&urinal 71 providing and fixing 1 mm thick m.s. sheet sliding-shutters, with frame and diagonal braces of 40x40x6 mm angle iron, 3 mm m.s. gusset plates at the junctions and corners, 25 mm dia pulley, 40x40x6 mm angle and t- iron guide at the top and bottom respectively, including applying a priming coat of approved steel primer up pwd sor-2020-dar-18/10.4 72 construction of granular sub-base by providing close graded material, mixing in mechanical mix plant at omc, carriage of mixed material to work at site, spreading uniform layers with motor grader on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 for grade-1 material. (morth/(ar/yeida/based on uppwd/sor-2020) 73 providing and laying 60mm thick i.s.i. mark factory made cement concrete interlocking concrete paver block made by block making machine with strong vibratory compaction of approved size, design, shape, laid in required colour and pattern over and including average 50mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per the direction of engineer-in-charge with conforming to is-15658 and irc:sp:63. (ar/yeida/ based on uppwd/sor-2020) 74 wiring point for light in 1.5 sq. mm. pvcinsulated singlecorecopperconductor cable (inpvcconduit with 1.5sq.mm. frlsh pvc insulated multistrand copperconductor cable as earth wire drawn inside conduit.)and5 amp.flush typeswitch& ceiling rose/angle/batten holderfixedwith3mmthickphenolic laminate backalitesheet withbrass machinescrews andcup washers mounted overexisting m.s.switch boardbox/junction boxwith supplyofallmaterial, labour& t&p etc. requiredforproper completion of the work complete in all respect, as directed by engineer in charge pwd-2018 ps no-174c 75 supply and wiring of submains with 2 nos. of 2.5 sq. mm. frlsh pvc insulated1100 vgrade multistrand singlecore copper conductorcable in 25mm dia heavy duty (2mm thick) pvc conduitwith2 nos 2.5 sq.mm.frlsh pvc insulated multistrand copperconductor cable asearth continuity wire drawn in conduit complete in all respect, as directed by engineer in charge pwd-2018 ps no-261c 76 supply and fixing of power plug with 20 amp./250 voltflush type modularswitchand 5 pin 20 a/250 voltflush typeuniversal modular socket switch on concealed m.sboxincluding supply of allmaterial, labourt&petc. complete in all respect, as directed by engineer in charge .pwd-2018 ps no-1139a 77 s&f surface/flush mounting 8 ways spn distribution board with additional metal door without mcb complete in all respect, as directed by engineer in charge. pwd-2018 ps -1024a 78 s&f of 6 amp to 32 amp. mcb (10 ka) c curve complete in all respect, as directed by engineer in charge.pwd-2018ps -1002cat-a 79 s&f of 40amp. dp mcb (10 ka) c curve complete in all respect, as directed by engineer in charge. pwd-2018 ps no-1010 cat-a 80 providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. clamp shall be made of 12 mm dia m.s. bar bent to shape as per standard drawing. (dar/10.18/based on uppwd/sor-2020))

Central Government/Public Sector

TRN :34427541 | 22 May, 2025

Tender Value : 0

Mohali - Punjab

Tender for gem bids for 5 megapixel outdoor colour ptz camera , 5 megapixel indoor colour ptz camera , 5 megapixel varifocal outdoor fixed camera , 5 megapixel varifocal indoor fixed camera , 5 megapixel outdoor anpr camera , layer 3 48 port switch , l2 24 port poe switch , l2 industrial grade 08 port managed poe switch , industrial grade media converter 04 plus 02 gigabit port , network storage as nas or san , 46 inch full hd led display , 3x2, 46 inch thin bazzele led video wall , work stations , control room console , video recording or management server , video analytic server , anpr server , ntp server , 8 port rack mountable kvm switch , 40u or 42u 19 inch equipment rack , power distribution panel , 20 kva rack mountable, modular, online ups set , software solution - vms,vas,frs,anpr , ng firewall or utm or antivirus for complete system , ms conduit , pvc pipe , hdpe pipe , gi pipe , optical fiber cable , cat 6 utp cable , cat6 4 pair shielded twisted pair cable , power cable 3 core 1.5 sqmm multi- strand pvc insulated pvc sheathed copper conductor , power cable 3 core 6 sqmm multi-strand copper conductor , power cable 4 core 16 sqmm multi-strand aluminium conductor , light guide interconnect unit liu , gi pole for mounting of camera , stainless steel pole for mounting of cameras , cutting of grooves of existing granite or tile or concrete flooring surface , excavation in soft or hard soil and road cutting , road cutting , horizontal directional digging , earthing , itc work , training and documentation , manpower during dlp period with epf,esic and bonus will be paid extra on actual basis on production of bills

Central Government/Public Sector

TRN :34404908 | 10 May, 2025

Tender Value : 0

Lucknow - Uttar Pradesh

Tender for gem bids for balloon angioplasty catheter 0point035 inch guidewire compatible over the , balloon angioplasty catheter drug coated 0point014 inch guidewire compatible , fibrin sealant 2ml with synthetic aprotenin , disposable percutaneous entry thin wall one piece needle 18 gauge 7point0 cm , guidewire ptfe coated j tip 0point035 inch diameter at least 260 cm , leur lock plastic syringe of 10ml capacity , ptee graft stretch 7mmx50cm , puncture needle for angiography 70 mm 18g , ringed reinforced thin walled expanded ptfe vascular grafts 6mm , self expanding nitinol stents for peripheral angioplasty assorted sizes , sheath guiding vascular access braided construction with non reflux , syringe luer lock polycarbonate construction for use with sclerosants etc 10 ml , syringe luer lock polycarbonate construction for use with sclerosants etc. 20 ml , sterile adhesive post op dressing large , balloon angioplasty catheter 0point014 inch guidewire compatible rapid exchange , balloon angioplasty catheter 0point035 inch guidewire compatible , balloon angioplasty catheter 0point 035 inch guidewire compatible , balloon mounted covered stent 8 to 10mmdia 40 to 80 mm length , balloon mounted covered stents 5to 12 mm of assorted lengths , disposable aortic punch 4point0 mm , distal embolic protection device point filter type , endovascular snare for retrieval of foreign body from small vessels 0point018 , endovascular snare for retrieval of foreign body from small vessels 0point035 , fogarty embolectomy catheters size 4f , fogarty embolectomy catheters size 5f , hydrophilic angiography catheter multipurpose 4 fr , hydrophilic angiography catheter simmons 1to 4 fr , hydrophilic angiography catheter simmons 1to 5 fr , sheath guiding vascular access braided construction with non , stent self expanding over the wire design shaft length , straight braided multipurpose catheter 5 to 0 fr 100 cms long no side , stretch reinforced thin walled expanded ptfe vascular grafts 6mm x 70cm , stretch reinforced thin walled expanded ptfe vascular grafts 8mm x 70cm , vascular tapes blue , vascular tapes red , catheter diagnostic angiography single endhole head hunter 4f or 5f 100cm , sheath vascular access with non reflux access valve sidearm with three way , balloon angioplasty catheter drug coated 0point 014 inch , bone wax , disposable percutaneous entry thin wall one piece needle , sheath guiding vascular access braided construction with , syringe luer lock polycarbonate construction for use with sclerosants etc 20 ml , balloon angioplasty catheter 0point014 inch guidewire , balloon angioplasty catheter 0point035 inch guidewire , balloon mounted covered stent 8 to 10mmdia 40to80 mm length , balloon mounted covered stents 5to12 mm of assorted lengths , distal embolic protection device filter type , endovascular snare for retrieval of foreign body from , endovascular snare for retrieval of foreign body from small , hydrophilic angiography catheter simmons 1 to 5 fr , sheath guiding vascular access braided construction , straight braided multipurpose catheter 5point0 fr 100 cms , stretch reinforced thin walled expanded ptfe vascular , sheath vascular access with non reflux access valve

State Government

TRN :49020479 | 13 May, 2025

Tender Value : 16.44 Lacs

Raigad - Maharashtra

Tender for providing temporary facade lighting for rajyabhishek function near jagdishwar temple, fortification wall, jay vijay stambh, palkhi darwaja at raigad fort, dist-raigad

Related Searched Keywords : guide wall

List of guide-wall Tenders

Tender for providing temporary facade lighting for rajyabhishek function near jagdishwar temple, fortification wall, jay vijay stambh, palkhi darwaja at raigad fort, dist-raigad

Get guide wall Tender Alert...

Related Searched Keywords : guide wall

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us