Filters

List of gi-tube Tenders

List of latest gi-tube Tenders in Indian Tenders. Click on any gi-tube Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for gi-tube Tenders.

All-Tenders (139)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35211713 | 29 Aug, 2025

Tender Value : 0

New Delhi - Delhi

Tender for supply of gi pipe of 80 mm for day to day maintenance of tube well in shalimar bagh constituency ac 14 re invite nit no. 14 2025-26m-vi item no. 09

Central Government/Public Sector

TRN :35211865 | 12 Sep, 2025

Tender Value : 38.50 Lacs

Kamrup - Assam

Tender for gem bids for dglp, bid number gem2025b6570271 dated 22-08-2025 bid document1 38 0 0 h dot pylori antigen detection rapid test dot, eus fnaneedle 22 g with cobalt chromium needle assembly andslimline, eus fna needle 19 g with cobalt chromiumneedle assembly and slimline, biliary double pigtaistent 10fr x 3cm, ercp sphincterotome ultratome xltriple lumen wire guided sphincterotome short nose 30mmcutting wire, savary gilliard guide wire sg size 250cm, single use triple lumen needle knife needle length 5mm, sohendera biliary dilatation catheter sbdc 11 dot 5cm, sohendera biliary dilatation catheter sbdc 10 fr, pancreatic stent 5fr x 12cm, acrobat 2 cabbrated tip wireguide 0 dot 025 inch working length 450 cms with 4 mmradio opaque tip, sohendera biliary dilatation cathetersbdc 9 fr, sohendera biliary dilatation catheter sbdc 8 fr, sohendera biliary dilatation catheter sbdc 7 fr, sohendera biliary dilatation catheter sbdc 6 fr, resolutionclip 235cm with 360 rotation control knob with 1 dot 1rotation, disposable hemostatic rotatable hemoclip 16mmlength 230cm coma od 2 dot 4 mm, roth net basket 2 dot8mm for retrieval of foreign bodies available in 230cm withnet size if 4 x 5 dot 5cm, endoscopic sclerotherapy injectorsize 21g needle length 4mm wl 220 minus 240cm, cystogastro set 6 fr, resolution clips 155 cm with 11mm widejaw, resolution clips 235 cm with 11mm wide jaw triclip, sodium sulphate coma potassium sulphate comamagnesium sulphate oral solution 17 dot 50gm slash 3 dot13gm slash 1 dot 60gm per bottle coloprep, biopsyforceps for peadtric endoscope 2mm, rat tooth forigenbody removal forceps 2 dot 8 mm coma 1650cm, carrlocke injection needle 23g slash 25g coma length 230cm, rat tooth forigen body removal forceps 1 dot 8 mm comaworking length 1650cm, roth net basket 1 dot 8mm forretrieval of foreign bodies available in 230cm with net sizeif 4 x 5 dot 5cm, tannebaum plastic biliary stent 10 fr x7cm, tannebaum plastic biliary stent 10 fr x 8cm, tannebaum plastic biliary stent 10 fr x 9cm, tannebaumplastic biliary stent 8 dot 5 fr x 7cm, tannebaum plasticbiliary stent 8 dot 5 fr x 8cm, tannebaum plastic biliarystent 8 dot 5 fr x 9cm, rotatable snare large oval 20 mmloop working length 240 cm, peg button replacement tube20 fr, peg button replacement tube 24 fr, roth netbasket, paediatric roth net basket mini for foreign bodyremoval with net size of 2 x 4 dot 5 cm and catheter lengthof 160 cm coma catheter dia 1 dot 8 mm, balloonreplacement gastrostomy tube 24f, balloon replacementgastrostomy tube 20 f, colonoscopy probe for argonplasma coagulation erbe, rigi flex tm ii achalasia balloondilator size 40mm balloon length 10cm and fluoroscopicmarkers, biliary stent plastic straight 10fr x 10 cm, abscess drainage sets pigtail set consists of pigtaildrainage catheter and dilators coma guide wire with j tipcoma draqinage bag connector coma scalpel size 10 frminus, abscess drainage sets pigtail set consists of pigtaildrainage catheter and dilators coma guide wire with j tipcoma draqinage bag connector coma scalpel size 12 fr, abscess drainage sets pigtail set consists of pigtaildrainage catheter and dilators coma guide wire with j tipcoma draqinage bag connector coma scalpel size 14 fr

Central Government/Public Sector

TRN :35207215 | 01 Sep, 2025

Tender Value : 0

Pithoragarah - Uttaranchal

Tender for gem bids for supply, cement bag 43 grade opc in polythene bags weighing 50kgs sand coarse crushed stone aggregate 40mm graded crushed stone aggregate 20mm graded hard core ofbroken stone aggregate of size 45 to 63 mm tmt steel bar10mm dia sub class b bricks for soakage pit vitrifiedcoloured ceramic tiles 600 x 600 x 9mm thick and doublecharged polished non skid coloured ceramic tiles of size400 x 400 x 7 to 8 mm thick cement white quick settingcompound water proofing compound rr stone prefabricated med shelter of size 12000mm x 9600mm x2800mm and a 1800mm wide and 12000mm long closedverandah and shelter will be provided with three toilets andthree store main trusses 6000mm long main truss will befabricated using rectangular hollow sections of size 80 x 40x 4mm verandah and bathroom trusses 1800mm longverandah truss will be fabricated using rectangular hollowsections of size 80 x 40 x 4mm main columns 3048 mmlong main columns will be fabricated using square hollowsteel section of size 113 point 5mm x 113 point 5mm x4mm verandah and bathroom columns 2100 mm longverandah bathroom columns will be fabricated using squarehollow steel section of size 113 point 5mm x 113 point 5mmx 4mm long purlins 3890mm long purlins shall be madeusing rectangular hollow steel section of 80 x 40 x 4mm end purlins 250mm long purlins shall be made usingrectangular hollow steel section of 80 x 40 x 4mm bracingpre fabricated ms hollow bracing of size 66mm x 33mm x 3point 2mm and 3890mm long bracing pre fabricated mshollow side bracing of size 66mm x 33mm x 3 point 2mmand 5890mm long wall panels the main and partition wallswill be 50mm thick continuous line manufactured sandwichwall hybrid core insulated panels the false ceiling will bemade up of 50mm thick continuous line manufactured bid number gem2025b6593626 dated 21-08-2025 bid document1 94 1 1 hybrid core insulated fireproof sandwich ceiling panels inmin 1100mm width, roof 0 point 60 mm thick ppgi sheetapproved colour fixed with self tapping screws over steelpurlins, ridge cover 0 point 60 mm thick pre coatedcorrugated sheet of approved colour matching with the roofsheet of size and design and 3m long and 900 mm wide, wind ties 12000mm long wind ties of 40 x 5mm ms flat oneach side of roof will be provided and shall be securedadequately to purlins with self tapping screws and steel andbitumen washers and bolts, door of size 900mm x 2000mmmade of powder coated aluminium frame, pvc doorsfactory made pvc moulded door shutter 30mm thick of size750 x 1900mm, window powder coated aluminum twotrack sliding window of size 1200 x 1200 mm with 02 nos ofglass shutter and stainless steel fly proof mesh and outsidealuminium grill shall be provided, aluminum ventilatorpowder coated aluminum ventilator fix type of size 900 x450 mm with stainless steel fly proof mesh shall beprovided, acrylic sheet fixed aluminum frame with 6mmthick acrylic sheet glazing 900mm wide will be providedalong the entire length of the verandah, sunshade asunshade of size 1500mm x 500mm for external windowswill have iron frame for fixing it to the shelter wall, sunshade b sunshade of size 1200mm x 500mm forexternal door and ventilatorss will have iron frame for fixingit to the shelter wall, foundation bolt 25mm dia 750mmlong welded with top and bottom anchor plate of size 250 x250 x 10mm and fixed with bottom base plate of columnusing nuts and bolts, nut bolt of size 12mm dia 75mm longwith washer, nut bolt of size 12mm dia 125mm long withwasher, nut bolt of size 12mm dia 150mm long with washer, rivet full size, self tapping screw 100 mm long, selftapping screw 75 mm long, star screw 15mm long, starscrew 25 mm long, star screw 75mm long, water tankwith staging 02 nos of hdpe 500 ltr capacity water tankand 01 nos of staging 3 point 20 mtr height which will bemade with ms angle iron, ewc vitreous china wash downwater closet cascade type with flushing cistern, wash handbasin vitreous china wash hand basin pedestal type angleback white flat back pedestal pype, bathroom cabinetptmt cabinet with looking mirror for toiletry items of size330mm x 140mm x 530mm with arrangements to fix thesame with wall, ss soap dish holder, cp towel rail 24 mmdia and 600 mm long with fixing fixing arrangement, stainless steel grating 100mm dia isi marked, stainlesssteel grating whith hole for waste pipe of whb, cp bib cock15mm bore long body, cp pillar tap 15 mm bore, cp anglevalve chromium plated steel 15 mm bore, cp stop cockchromium plated steel 15mm bore, chromium platedshower rose 100 mm dia, pvc p trap 110mm dia, pvcfloor trap 110mm dia, pvc elbow 110mm dia 90 degreeangle, pvc elbow 110mm dia 45 degree angle, pvc tee110mm dia, pvc socket 110mm dia, pvc pipe 75mm dia, ppr pipe 32mm dia and 3 layer pn 16 oblique sdr 7 point 4, ppr elbow 32mm, ppr tee 32mm, ppr socket 32mm, ppr union 32mm, ppr reducer socket 32 x 20mm, pprreducer tee 32 x 20mm, ppr reducer elbow 32 x 20mm, ppr tank connector 32mm, ppr gate valve 32mm, pprpipe 20mm dia and 3 layer, ppr elbow 20mm, pprthreaded elbow 20mm, ppr tee 20mm, ppr threaded tee20mm, ppr socket 20mm, ppr threaded socket 20mm, steel connection 600mm long with brass check nuts andrubber washers for gyzer, pvc connection 600mm long withbrass check nuts and rubber washers for bain and flush //bid details2 / 94 cistern, pvc solvent cement, teflon tape 12mm wide and10 mtr long, cgi sheet 3000 x 900 x 0 point 60mm of isimark, gi pipe 2400mm long and 50 mm dia and 1 point5mm thick, 20 watt led tube light fitting and 230v withelectronic ballasts and holder and connector and block etc, auto rechargable led bulb18 w with modular lamp frame, bulk head fitting with auto rechargable led bulb18 w, exhaust fan compact with louver type and plastic body size300mm sweep will be provided, modular pvc switch board8 x 10 inch, modular pvc switch board 6 x 4 inch, modularpvc square box 4 x 4 inch, modular switch piano and flushtype 5 amp, modular dummy switch, modular switchsocket combination 15 amp, modular switch socketcombination 10 amp, wire single core copper conductor 1point 5 sqmm of different colour, wire single core copperconductor 2 point 5 sqmm, electric wire two core 6 sqmmand copper conductor, pvc casing and capping of size25mm, pvc casing capping l bend, pvc casing cappingtee bend, ceiling rose, mcb box 8 way spn, mcb 32 ampsp, change over switch 63 amp 3 phase four pole, electrical geyser 15 ltrs capacity mounted to wall panellinluding fixing arrnangements, tape insulation one and halfx 15 mtr with isi mark, gi wire 14 swg, earthing of buildingwill be provided using 4mm dia gi set earth wire connectingto main board to gi earth plate, lightning conductor madeof copper tube150cm long x 25 mm dia with five copperprongs of length 15 cm each fixed to copper ball of dia50mm and 4mm thick, hard bed overall size shall be1980mm long and 900mm wide and 440mm high, mattresssize 1980mm x 900mm mattress with two layers each50mm thick and first layer of pu foam and second layer ofrubberized coir foam for each bed shall be provided, provision of fire extinguisher 6kgs abc dry powder storedpressure type, keroheater automatic ignition kero roomheater and non toxic fume and weight not less than 12 kgand fuel tank capacity 18 lit with fuel indication gauge, solar hand held light of susolartech or mini lantern powerled with both solar and ac charger, almirah of size1230mm x 595mm x 355mm made of plastic sheet and 2nos horizontal shelf having legs height shall be 100mm, cushion chair red plastic moulded seat cum back withsupport structure including seat cushion and arms, steeltable of size 1200mm x 900mm x 720mm with 18mm thickpre laminated particle board exterior grade is 12823 on topwith 4mm thick teak wood beading with headless nails, water dispenser hot and cold and normal water 20 ltrcapacity with jar of 20 ltr, waste bin plastic waste bin ofsize of waste bin 325 x 325mm at top and 290 x 290mm atbottom with the height of 495mm, shoe rack ms shoerack to be provided for each shelter, curtain rod stainlesssteel curtain rod decorative type 1500mm long 25mm diafor doors and opening including bracket and domes obliquefunnels, tarpaulin hdpe water proof cover in og colour ofsize 12 mtr x 12 mtr, hospital bed mild steel hospital bed ofsize 1900mm x 900mm x 600mm, crash cart stainlesssteel crash cart with abs drawers 06 nos and smoothmobility 04 nos of wheels and locking mechanism andmodular configuration for emergency situation in hospital, medicine oblique injection rack ms heavy duty medicinerack of size 835mm x 300mm x 1675mm of 1mm nominalthick ms sheet with 04 nos shelves having lockable glassdoors, bio medical dustbin plastic portable bio medicalwaste dustbin of 10 ltr capacity, field water heating deviceshamam 500 litrs with five nos of sleeves with 1mm thick ms //bid details3 / 94 cover, solar street light 25w including pole having length 5mtr long and 75mm dia and complete accessories, rivetingmachine, pan motor 18 inch dia, showel with woodenhandle, axes picks 03 kg head with handle, wire mess forseving sand, trowels, brick, water level pipe for mason100 mtr long, sprit level, plum bob steel, nylon masonthread 100 mtr long, measuring tape 05 mtr, measuringtape 30 mtr, safety helmet, gum boot, hand glovesrubber, hand held electric drill machine 10mm cordlessalong with screw head, steel wood cutter circular, cuttingblade 4inch steel, cutting blade 14inch steel, hexa blade350mm long, welding machine portable inverter, weldingrod, auto darkening welding helment, welding gloves, toolkit for electrician, tile cutter machine electric with 05 blade, portable generator set 5 kva, diesel air brooder heater30kw

Central Government/Public Sector

TRN :35208623 | 11 Sep, 2025

Tender Value : 0

Leh - Ladakh

Tender for gem bids for mta, angle holder make havells oblique anchor or equipvalentwith isi marked batten holder havells oblique anchor bajaj bed switch make anchor oblique havells oblique legrandoblique indo asian bulk head fitting model nolhkl01160099 of havells or equivalent make in bajajoblique philips with cfl 08 watt change over 100 amp 4pole make havells oblique legrand oblique l and t changeover switch 32 amp 2 pole make havells oblique legrandoblique l and t change over switch 63 amp 4 pole makehavells oblique legrand oblique l and t mcb distributionbox 6 way double door spn 240 volts copper bus bar andneutral link earthing stud confo rming to is 13032 mcbdistribution box 8 way double door spn 240 volts copperbus bar and neutral link earthing stud conforming to is13032 mcb distribution box 12 way double door spn 240volts copper bus bar and neutral link earthing studconforming to is 13032 extension cord 6 oblique 16 ampmake havells oblique anchor flexible wire copperconductor 100m make finolex oblique plaza oblique polycaboblique havells gang box 4 way 4 switches 6 amp gangbox 6 way 6 switches 5 amp gang box 2 way 2 switches 5amp gang box 1 way 1 switches 5 amp gang box 8 way gi wire for earthing led bulb 7 oblique 8w make wiprooblique philips oblique syska led bulb 15 watt make wiprooblique philips oblique syska led bulb 20w make wiprooblique philips oblique syska led invertor rechargablebulb 10 watt with isi mark led bulk head fittings 10wmake bajaj oblique philips oblique crompton led flood andoutdoor lights ssk bln 50w make syska oblique wiprooblique oreva or equipvalent led tube light fitting1x20watt complete with all accessories internally pre wired andincluding connecting up with twin core twisted flexiblecopper conductor cable with suitable size led invertor bid number gem2025b6594107 dated 21-08-2025 bid document1 106 rechargable tube light fitting1x20 watt complete with allaccessories internally pre wired and including connecting led tube light fitting 1 x 9w oblique 10w 2 feet longcomplete with all accessories internally pre wired andincluding connecting main switch 32 amps 4 pole tpnconfirming to is 13947 part 3 2607 make havells obliquestandard oblique l and t main switch 63 amps 4 pole tpnconfirming to is 13947 part 3 2607 make havells obliquestandard oblique l and t main switch 100 amps 4 pole tpnconfirming to is 13947 part 3 2607 make havells obliquestandard oblique l and t mcb 6 amp make havells obliquel and t oblique standard oblique crompton greaves mcb10 amp make havells oblique l and t oblique standardoblique crompton greaves mcb 16 amp make havellsoblique l and t oblique standard oblique crompton greaves mcb 32 amp make havells oblique l and t obliquestandard oblique crompton greaves mcb 40 amp makehavells oblique l and t oblique standard oblique cromptongreaves mcb dp 32 amp make havells oblique l and toblique standard oblique crompton greaves mcb dp 40amp make havells oblique l and t oblique standard obliquecrompton greaves mcb dp 63 amp make havells oblique land t oblique standard oblique crompton greaves mcbtpn 40 amp make havells oblique l and t oblique standardoblique crompton greaves mcb tpn 63 amp make havellsoblique l and t oblique standard oblique crompton greaves ms screw full threaded 20mm 100pcs ms screw fullthreaded 25mm 100 pcs pendent holder make havellsoblique anchor or equipvalent with isi marked piano typeswitch 6 amp make anchor oblique havells oblique legrandoblique indo asian plastic body exhaust fan 200mmsweep with louvers make havells oblique cropmton obliquebajaj plastic body wall mounting fan sweep 300mm makehavells oblique cropmton oblique bajaj plug top 3 pin 16amp make anchor oblique havells oblique legrand obliqueindo asian plug top 3 pin 6 amp make anchor obliquehavells oblique legrand oblique indo asian pvc cable 10sqmm 2 core copper make finolex oblique plaza obliquepolycab oblique havells pvc cable 4 sqmm 2 core coppermake finolex oblique plaza oblique polycab oblique havells pvc cable 6 sqmm 2 core copper make finolex anchorhavells pvc casing caping elbow 25mm dia make s liteoblique pressfit oblique plaza or equivalent oblique plaza orequivalent casing caping double locked box type 25mm x1800mm long with all fiitings oblique fixtures such as teefeet l feet for inner and outer corners and joint cap with isimark casing caping double locked box type 32mm x1800mm long with all fittings oblique fixtures such as teefeet l feet for inner and outer corners and joint cap with isimark casing caping double locked box type 20mm x1800mm long with all fittings oblique fixtures such as teefeet l feet for inner and outer corners and joint cap with isimark pvc casing capnig t feet 25mm dia make s liteoblique pressfit oblique plaza or equivalent oblique plaza orequivalent pvc casing capnig l bend 25mm dia make slite oblique pressfit oblique plaza or equivalent obliqueplaza or equivalent pvc casing capnig square box 4 x 4make s lite oblique pressfit oblique plaza or equivalentoblique plaza or equivalent pvc ceiling rose 2 oblique 3terminal make anchor oblique pressfit oblique havells pvccopper cable 1 point 5 sqmm black sc 90 mtr make finolexoblique plaza oblique polycab oblique havells pvc coppercable 1 point 5 sqmm red sc 90 mtr make finolex obliqueplaza oblique polycab oblique havells pvc copper cable bid details2 106 1 1 2.5 sqmm black sc 90 mtr make finolex oblique plazaoblique polycab oblique havells, pvc copper cable 2.5sqmm green sc 90 mtr make finolex oblique plaza obliquepolycab oblique havells, pvc copper cable 2.5 sqmm redsc make finolex oblique plaza oblique polycab obliquehavells, pvc copper cable 4 sqmm green sc 90 mtr makefinolex oblique plaza oblique polycab oblique havells, cable pvc insulated with aluminium conductor multistranded 1100 v grade twin core circular type 10 sqmm 2core isi mark armoured, cable pvc insulated withaluminium conductor multi stranded 1100 v grade twin corecircular type 6 sqmm 2 core isi mark armoured, cable pvcinsulated with aluminium conductor multi stranded 1100 vgrade twin core circular type 16 sqmm 2 core isi markarmoured, pvc swich bd 8 x 10 make havells obliqueanchor, pvc switch bd 4 x 6 make havells oblique anchor, pvc tape insulation 25 mm wide 9 mtr long make steelgripoblique anchor oblique kinjal, socket 3 pin 16 amp makeanchor oblique havells oblique legrand oblique indo asian, socket 3 pin 6 amp make anchor oblique havells obliquelegrand oblique indo asian, street light led 120w makephilips oblique syska oblique bajaj oblique havells, streetlight led 30w make philips oblique syska oblique bajajoblique havells, street light led 60w make philips obliquesyska oblique bajaj oblique havells, sunmica bd withwooden bd 4 x 4, sunmica bd with wooden bd 4 x 6, sunmica bd with wooden bd 8 x 10, switch 15 oblique 16amp make havells oblique anchor oblique bajaj, switch 5oblique 6 amp make havells oblique anchor oblique bajaj, switch socket combination 5 pin 16 amp with gang boxmake anchor oblique havells oblique legrand oblique indoasian, switch socket combination 5 pin 6 amp with gangbox make anchor oblique havells oblique legrand obliqueindo asian, smoke alarm, xlpe insulated pvc seathedheavy duty armoured multi core cable 6 sqmm 2 corealuminum conductor for working, xlpe insulated pvcseathed heavy duty armoured multi core cable 10 sqmm 2core aluminum conductor for working voltage, xlpeinsulated pvc seathed heavy duty armoured multi corecable 16 sqmm 2 core aluminum conductor for workingvoltage 1100 volt, xlpe insulated pvc sheathed heavyduty armoured multi core cable 35 sqmm 3.5 corealuminium conductor for working voltage, xlpe insulatedpvc sheathed heavy duty armoured multi core cable 50sqmm 3.5 core aluminium conductor for working voltage, fd water heating tank 500 ltr with motor bhatti, waterhammam 50 ltr, ppr socket outer dia 40 mm, silicon tape, insulation for 40mm outer dia pp r pipe pn 20 oblique sdr63 layers of size 28mm x 19mm with isi mark, insulation for32mm outer dia pp r pipe pn 20 oblique sdr 63 layers ofsize 28mm x 19mm with isi mark, glass shelf of toughnedglass with chromium plated steel frame, corner shelf oftoughned glass with chromium plated steel frame, cptowel rail 600mm long 20mm dia, waste pipe for washbasin, pvc s trap 75mm make prince oblique supreme withisi marked, pvc sheet green, m seal 200 gm pkt makepidilite oblique fevicol oblique m seal, cp bib cock 15mmshort body make cera oblique prayag oblique polytap orequipvalent, cp bib cock 20mm make cera oblique prayagoblique polytap or equipvalent, distemper, plasticemulsion paint make asian nerolac, waste pipe for urinalpot, alu tower bolt 75mm with isi marked, looking mirrorframeless of size 600x450x5mm with 4mm ply baking makeprayag oblique saint gobin oblique modigaurd, puff wall //bid details3 / 106 panel 2900x 1000mm both side white, vitreous china washhand basin white flat back size 550 x 450mm long pvcconnection with ptmt nut 1m long pvc flexible waste pipeand bracket for holding whb, wc indian type make ceraoblique hindware oblique parryware, european wc with sfeet or p feet trap concealed of size 650 x 405 x 770mmwith sheet cover make cera oblique hindware obliqueparryware, vitreous china dry urinal bowl flat back waterfree odour free stain free white colour with couplingincluding hdpe waste pipe and fixing accessories complete, looking mirror with pvc frame 21 x 15, hdpe water storagetank 1000 ltr 3 layer make sintex oblique polycon obliquepolywell alongwith clid., hdpe water storage tank 500 ltr 3layer make sintex oblique polycon oblique polywellalongwith clid., adhesiver solution sh make fevicol, hinges100mm make spider with isi marked, nut bolt and washer12mm x 4, taflon tape roll isi marked make supremeoblique omega oblique asbestos, white cement confirmingto is 8042 oblique 1989 make acc oblique birla whiteoblique ambuja, acrylic sheet 3 feet x4 feet x3mm, bowhandle oblique door handle make jindal oblique classic, ppgi sheet 12 feet x 3 feet x 0.63mm tata oblique jindaloblique sail with isi marked, ppgi sheet 8 feet x 3 feet x0.63mm tata oblique jindal oblique sail with isi marked, curtain rod steel, clamp for curtain, curtain ball, fireextinguisher 4.5 kg, fire extinguisher 1 kg ball type, hdpesand bags with thin plastic inner length 630mm and width350mm and weight 80 gms minimum colour sand, keroheater batti, nails assorted 0.5 6, paint brush 2 makespartan oblique orson oblique laxmi, paint brush 3 makespartan oblique orson oblique laxmi, paint red oxidemake berger oblique nerolac oblique asian, plywood 6 feetx3 feet x12mm make century oblique duro oblique green, plywood 8 feet x4 feet x4mm make century oblique durooblique green, plywood 8 feet x4 feet x12mm makecentury oblique duro oblique green, screw full thread 1oblique 2 75 pices, screw full thread 1 75 pices, screw fullthread 2 75 pices, screw full thread 3 75 pices, screw fullthread 4 75 pices, sliding bolt 100mm with isi marked makeclassic, synthetic enamel paint colour black in 20 oblique10 ltr containers make berger oblique nerolac obliqueasian paints oblique aqualac, synthetic enamel paintcolour blue in 20 oblique 10 ltr containers make bergeroblique nerolac oblique asian paints oblique aqualac, synthetic enamel paint colour green in 20 oblique 10 ltrcontainers make berger oblique nerolac oblique asianpaints oblique aqualac, synthetic enamel paint colourwhite in 20 oblique 10 ltr containers make berger obliquenerolac oblique asian paints oblique aqualac, syntheticenamel paint colour yellow in 20 oblique 10 ltr containersmake berger oblique nerolac oblique asian paints obliqueaqualac, cp butt hinges 100mm, door hinges size 4 longmedium weight steel, hydraulic door closer, peg stay, saltcoarse for lightening conductor, screw black color 1oblique 2 feet, self taping screw 1 long, self taping screw 2long, self taping screw 3 long, soap dish chromium plate, steel screw 1 oblique 2 size half thread isi marked 100 nospkt, sunmica sheet 8 feet x 4 feet x 3mm make shalimar, cement make ambuja oblique ultratech oblique acc, nonskid ceramic tiles 300 x 300mm make somany obliquekajaria oblique nitco oblique oriental oblique cera, nonskid ceramic tiles 600 x 600mm make somany obliquekajaria oblique nitco oblique oriental oblique cera, angleiron 65x65x6mm thick make tata oblique sail oblique jsw //bid details4 / 106, ms y pole of size 65x65x6mm thick make tata obliquesail oblique jsw 8 feet long, plier side cutting maketaparia oblique jcb oblique stanley, iron welding rodconfirming to is 814 2002 isi marked 3.15mm thick. 100nos pkt, hand gloves insulated with 2 rubber, de spanner15 x 16 make taparia oblique stanley oblique tata, despanner 17 x18 make taparia oblique stanley oblique tata, drill bits 1 oblique 8 in packet of 10 nos make tapariaoblique bosch, drill bits 9 oblique 6 in packet of 10 nosmake taparia oblique bosch, drill bits metal 10 mm in pkt, drill bitt adopter 10 mm make generic oblique boschoblique jpt, drill bitt adopter 12 mm make generic obliquebosch oblique jpt, drilling machine portable type electricaldriven make bosch oblique tiger, hacksaw blade makebosch oblique jcb, hand gloves rubber, pipe wrench 14, ratchet spanner 14 x 15 make vertex oblique stanleyoblique tata, ratchet spanner 16 x 17 make vertexoblique stanley oblique tata, spanner ojde 14 15 makehira oblique taparia, spanner ojde 16 17 make hiraoblique taparia, star bit make generic oblique boschoblique jpt, steel gurumala as per is code 8205, woodengurumala as per is code 1630 1984., digitel clamp metermake g tech oblique fluke oblique meco, hydrometerbrand ssu

Central Government/Public Sector

TRN :35194477 | 01 Sep, 2025

Tender Value : 0

Nagpur - Maharashtra

Tender for gem bids for steel tubes, tubulars and other wrought steel fittings v2as per is 1239 part 1 q2 . . % % 4 4 /mse exemption for years ofexperience and turnoverno& % & % . . % % 4 4 /startup exemption for years ofexperience and turnoverno 5 5 & & /document requiredfrom sellercertificate requested in atc, oem authorizationcertificate, additional doc 1 requested in atc, additionaldoc 2 requested in atc, additional doc 3 requested inatc, additional doc 4 requested in atcin case any bidder is seeking exemption from experience /turnover criteria, the supporting documents to prove hiseligibility for exemption must be uploaded for evaluation bythe buyer7 7 9 9 : : ; ; & 9 & 9 < < 9 9 ; ; > >? ? % % /do you want to showdocuments uploaded by bidders to allbidders participated in bid?yes documents submitted as part of a clarification orrepresentation during the tender/bid process will also bedisplayed to other participated bidders after log in -- b b c c 5 5 d d / minimum number ofbids required to disable automatic bidextension3 d /bid number: gem/2025/b/6590919; /dated: 21-08-2025 & & / bid document1 / 27 ; 9; 9 d d, , m m -- / / number of days for which bidwould be auto--extended7 o %o % ;5 ;5 ; ; /bid to ra enabledyeso %o % p p /ra quali cation ruleh1-highest priced bid elimination5 5 r r /itc available tobuyeryes 4 4 /type of bidtwo packet bid4 4 t t /primary product categorysteel tubes, tubulars and other wrought steel fittings v2as per is 1239 part 1 u u & w & w /time allowed for technicalclarifications during technical evaluation3 days x x b b y y x x 4 4 / % % < 9 < 9 : : /inspection required byempanelled inspection authority / agenciespre-registered with gemno u u y y /evaluation methodgroup wise evaluation & & /arbitration clauseno /mediation clauseno //bid details /emd detail > /advisory bankidbi bankschedule-1 /emd amount in inr25000schedule-2 /emd amount in inr25000schedule-3 /emd amount in inr25000 /epbg detail > /advisory bankidbi bank 4 %/epbg percentage%5.00 b /duration of epbgrequired months.14a. . ^ % & 4& % & % 4 > o 9 /emd exemption: the bidder seeking emd exemption, must submit the valid supporting document2 / 27 for the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods andservice providers for services are eligible for exemption from emd. traders are excluded from the purview of thispolicy.b. the emd amount will be applicable for each schedule/group selected during bid creation.c. , , ` x < ; / emd & performance securityshould bein favour of beneficiary, wherever it is applicable. ` ` /beneficiary : head of department, financefinance department, moil limited, moil bhavan, 1a, katol road, nagpur-440013 the details of beneficiarybank for sending details of bg under sfms platform is advisory bank: idbi bank, idbi bank, gupta house, ravindranath tagore road, civil lines nagpur-440001, advisory bank ifsc code: ibkl0000389 & currentaccount no. 041102000018027.moil limited /splitting ; / bid splitting not applied. /mii purchase preference /mii purchase preferenceyes /mse purchase preference /mse purchase preferenceyes1. preference to make in india products for bids < 200 crore:preference shall be given to class 1 local supplieras defined in public procurement preference to make in india, order 2017 as amended from time to time and itssubsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimumlocal content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail thepurchase preference, the bidder must upload a certificate from the oem regarding the percentage of the localcontent and the details of locations at which the local value addition is made along with their bid, failing whichno purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relatingto percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a companyand by a practicing cost accountant or a chartered accountant for oems other than companies as per the publicprocurement preference to make-in -india order 2017 dated 04.06.2020. only class-i and class-ii local suppliersas per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated 04.06.2020 arenot eligible to participate. however, eligible micro and small enterprises will be allowed to participate .thebuyers are advised to refer the om no.f.1/4/2021-ppd dated 18.05.2023.om no.1 4 2021 ppd dated 18.05.2023 for compliance of concurrent application of public procurement policyfor micro and small enterprises order, 2012 and public procurement preference to make in india order, 2017. 2. purchase preference will be given to mses having valid udyam registration and whose credentials arevalidated online through udyam registration portal as defined in public procurement policy for micro and smallenterprises mses order, 2012 dated 23.03.2012 issued by ministry of micro, small and medium enterprises andits subsequent orders/notifications issued by concerned ministry. if the bidder wants to avail themselves of thepurchase preference, the bidder must be the manufacturer / oem of the offered product on gem. traders areexcluded from the purview of public procurement policy for micro and small enterprises and hence resellersoffering products manufactured by some other oem are not eligible for any purchase preference. in respect of bid3 / 27 for services, the bidder must be the service provider of the offered service. relevant documentary evidence inthis regard shall be uploaded along with the bid in respect of the offered product or service and buyer will decideeligibility for purchase preference based on documentary evidence submitted, while evaluating the bid. if l-1 isnot an mse and mse seller s has / have quoted price within l-1+ 15% selected by buyer of margin ofpurchase preference /price band defined in relevant policy, such mse seller shall be given opportunity to matchl-1 price and contract will be awarded for 25% selected by buyer percentage of total quantity. the buyers areadvised to refer the om no. f.1/4/2021-ppd dated 18.05.2023 om no.1 4 2021 ppd dated 18.05.2023 forcompliance of concurrent application of public procurement policy for micro and small enterprises order, 2012and public procurement preference to make in india order, 2017. benefits of mse will be allowed only if seller isvalidated on-line in gem profile as well as validated and approved by buyer after evaluation of documentssubmitted. 3. estimated bid value indicated above is being declared solely for the purpose of guidance on emd amount andfor determining the eligibility criteria related to turn over, past performance and project / past experience etc.this has no relevance or bearing on the price to be quoted by the bidders and is also not going to have anyimpact on bid participation. also this is not going to be used as a criteria in determining reasonableness ofquoted prices which would be determined by the buyer based on its own assessment of reasonableness andbased on competitive prices received in bid / ra process. 4. reverse auction would be conducted amongst all the technically qualified bidders except the highest quotingbidder. the technically qualified highest quoting bidder will not be allowed to participate in ra. however, h-1will also be allowed to participate in ra in following cases:i. if number of technically qualified bidders are only 2 or 3.ii. if buyer has chosen to split the bid amongst n sellers, and h1 bid is coming within n.iii. in case primary product of only one oem is left in contention for participation in ra on elimination of h-1.iv. if l-1 is non-mse and h-1 is eligible mse and h-1 price is coming within price band of 15% of non-mse l-1v. if l-1 is non-mii and h-1 is eligible mii and h-1 price is coming within price band of 20% of non-mii l-1if the buyer has mentioned mse purchase preference in atc then service provider is required to uploadnecessary documents for mse purchase preference for verification by the buyer during evaluation.evaluation method group wise evaluation method contract will be awarded schedulewise and the determination of l1 will be done separately for each schedule.the details of item-consignee combination covered under each schedule are as under:evaluationschedulesitem/categoryconsignee/reportingofficerconsignee addressquantityschedule-1steel tubes, tubulars and otherwrought steel fittings v2 as per is1239 part 1nitin surendraghodeswarpo:kandri, tah:ramtek, dist:nagpur, maharashtra, 44140144140154schedule-2steel tubes, tubulars and otherwrought steel fittings v2 as per is1239 part 1nitin surendraghodeswarpo:kandri, tah:ramtek, dist:nagpur, maharashtra, 44140144140156schedule-3steel tubes, tubulars and otherwrought steel fittings v2 as per is1239 part 1nitin surendraghodeswarpo:kandri, tah:ramtek, dist:nagpur, maharashtra, 44140144140113steel tubes, tubulars and otherwrought steel fittings v2 as per is1239 part 1nitin surendraghodeswarpo:kandri, tah:ramtek, dist:nagpur, maharashtra, 44140144140133steel tubes, tubulars and otherwrought steel fittings v2 as per is1239 part 1nitin surendraghodeswarpo:kandri, tah:ramtek, dist:nagpur, maharashtra, 4414014414013steel tubes, tubulars and otherwrought steel fittings v2 as per is1239 part 1nitin surendraghodeswarpo:kandri, tah:ramtek, dist:nagpur, maharashtra, 44140144140114 / 27 steel tubes, tubulars and other wrought steel fittings v2 as per is 1239 part 1 54 metric tonne 5 5 1 2 & & % % % % b b < < % % 4 c4 c b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectivelybis requiredyes w w /technical specifications w / as per gem category speci cation /speci cation w w /specificationname b b u u /bid requirementallowed valuesgoverningspecificationsgoverning specificationsgenerally conforming to is 1239 part 1 - latestmaterial, design &dimensionsmanufacturing process oftubeelectric resistance welded or high frequncyinduction welded erw or hfiwend condition of tubescrewed & socketed endclassification of steel tubedepending on wallthicknessmediumsurface condition of thetubegalvanized tubenominal bore of tube mm100additional specification parameters - steel tubes, tubulars and other wrought steel fittings v2as per is 1239 part 1 54 metric tonne specification parameternamebid requirement allowed valueseligibility criteria:the bidder should upload bis license issued to manufacturer for offereditem valid as on the date of bid opening. copy of the valid bis license shouldbe uploaded, failing which the offer submitted by bidder shall be liable to beignored. make/ manufacturer name and brand name of the offered itemmust be clearly specified by the bidder.pre-qualifying condition:the bidder should have supplied tendered product s during preceding 3financial years i.e. current year and three previous financial years as ondate of opening of the bid as per the following criteria: i single order of atleast 35% of quantity under procurement; or ii two orders of at least 20?chof quantity under procurement; or iii three orders of at least 15?ch ofquantity under procurement.pre-qualifying condition-1:guarantee / warrantee:satisfactory performance certificate issued by respective buyer organizationalong with the above orders should be uploaded with the bid. the materialsupplied shall be guaranteed for a period of 12 months from the date ofreceipt at destination towards manufacturing defect, bad workmanship andsubstandard material. such material shall be replaced by you free of cost.5 / 27 test certificates: quantityvariation : class:the successful bidder shall be required to submit test certificates of theoffered item along with supply, as per is provisions free of cost. thementioned quantity is subject to change 20% and order for such changedquantity shall be placed. supply quantity variation +/- 2% is acceptable.medium.technical specification:galvanised mild steel tube conforming to is 1239 part-i of 2004 with latestamendments & isi mark, continuously welded, electric resistance weldederw, high frequency induction welded hfiw/hot finished welded hfw, screwed on both ends to is:554/86 for pipe threading, suitable for gas, water & steam application, one end socketed and other end protected withplastic thread protector in random lengths of 5 to 7 mtrs., socket to confirmis 1239 part- ii of 1992 in following sizes.specification parameternamebid requirement allowed values* bidders offering must also comply with the additional specification parameters mentioned above. 5 ; 5 ; o %o % 4 4 /input tax credititc and reverse chargercm details 5 ; 5 ; /itc on gst 5 ; 5 ; /itc on gst cess100%na //o ; e o ; e /consignees/reporting officer and quantity5. .5. ./s.no. //o ; e o ; e /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1nitin surendraghodeswar441401, po:kandri, tah:ramtek, dist:nagpur, maharashtra, 4414015460steel tubes, tubulars and other wrought steel fittings v2 as per is 1239 part 1 56 metric tonne 5 5 1 2 & & % % % % b b < < % % 4 c4 c b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectivelybis requiredyes w w /technical specifications* w / as per gem category speci cation /speci cation w w /specificationname b b u u /bid requirementallowed valuesgoverningspecificationsgoverning specificationsgenerally conforming to is 1239 part 1 - latestmaterial, design &dimensionsmanufacturing process oftubeelectric resistance welded or high frequncyinduction welded erw or hfiwend condition of tubescrewed & socketed end6 / 27 classification of steel tubedepending on wallthicknessmediumsurface condition of thetubegalvanized tubenominal bore of tube mm150 /speci cation w w /specificationname b b u u /bid requirementallowed valuesadditional specification parameters - steel tubes, tubulars and other wrought steel fittings v2as per is 1239 part 1 56 metric tonne specification parameternamebid requirement allowed valueseligibility criteria:the bidder should upload bis license issued to manufacturer for offereditem valid as on the date of bid opening. copy of the valid bis license shouldbe uploaded, failing which the offer submitted by bidder shall be liable to beignored. make/ manufacturer name and brand name of the offered itemmust be clearly specified by the bidder.pre-qualifying condition:the bidder should have supplied tendered product s during preceding 3financial years i.e. current year and three previous financial years as ondate of opening of the bid as per the following criteria: i single order of atleast 35% of quantity under procurement; or ii two orders of at least 20?chof quantity under procurement; or iii three orders of at least 15?ch ofquantity under procurement.pre-qualifying condition-1:guarantee / warrantee:satisfactory performance certificate issued by respective buyer organizationalong with the above orders should be uploaded with the bid. the materialsupplied shall be guaranteed for a period of 12 months from the date ofreceipt at destination towards manufacturing defect, bad workmanship andsubstandard material. such material shall be replaced by you free of cost.test certificates: quantityvariation : class:the successful bidder shall be required to submit test certificates of theoffered item along with supply, as per is provisions free of cost. thementioned quantity is subject to change 20% and order for such changedquantity shall be placed. supply quantity variation +/- 2% is acceptable.medium.technical specification:galvanised mild steel tube conforming to is 1239 part-i of 2004 with latestamendments & isi mark, continuously welded, electric resistance weldederw, high frequency induction welded hfiw/hot finished welded hfw, screwed on both ends to is:554/86 for pipe threading, suitable for gas, water & steam application, one end socketed and other end protected withplastic thread protector in random lengths of 5 to 7 mtrs., socket to confirmis 1239 part- ii of 1992 in following sizes* bidders offering must also comply with the additional specification parameters mentioned above. 5 ; 5 ; o %o % 4 4 /input tax credititc and reverse chargercm details 5 ; 5 ; /itc on gst 5 ; 5 ; /itc on gst cess7 / 27 %na 5 ; 5 ; /itc on gst 5 ; 5 ; /itc on gst cess //o ; e o ; e /consignees/reporting officer and quantity5. .5. ./s.no. //o ; e o ; e /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1nitin surendraghodeswar441401, po:kandri, tah:ramtek, dist:nagpur, maharashtra, 4414015660steel tubes, tubulars and other wrought steel fittings v2 as per is 1239 part 1 13 metric tonne 5 5 1 2 & & % % % % b b < < % % 4 c4 c b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectivelybis requiredyes w w /technical specifications* w / as per gem category speci cation /speci cation w w /specificationname b b u u /bid requirementallowed valuesgoverningspecificationsgoverning specificationsgenerally conforming to is 1239 part 1 - latestmaterial, design &dimensionsmanufacturing process oftubeelectric resistance welded or high frequncyinduction welded erw or hfiwend condition of tubescrewed & socketed endclassification of steel tubedepending on wallthicknessmediumsurface condition of thetubegalvanized tubenominal bore of tube mm25additional specification parameters - steel tubes, tubulars and other wrought steel fittings v2as per is 1239 part 1 13 metric tonne specification parameternamebid requirement allowed values8 / 27 eligibility criteria:the bidder should upload bis license issued to manufacturer for offereditem valid as on the date of bid opening. copy of the valid bis license shouldbe uploaded, failing which the offer submitted by bidder shall be liable to beignored. make/ manufacturer name and brand name of the offered itemmust be clearly specified by the bidder.pre-qualifying condition:the bidder should have supplied tendered product s during preceding 3financial years i.e. current year and three previous financial years as ondate of opening of the bid as per the following criteria: i single order of atleast 35% of quantity under procurement; or ii two orders of at least 20?chof quantity under procurement; or iii three orders of at least 15?ch ofquantity under procurement.pre-qualifying condition-1:guarantee / warrantee:satisfactory performance certificate issued by respective buyer organizationalong with the above orders should be uploaded with the bid. the materialsupplied shall be guaranteed for a period of 12 months from the date ofreceipt at destination towards manufacturing defect, bad workmanship andsubstandard material. such material shall be replaced by you free of cost.test certificates: quantityvariation : class:the successful bidder shall be required to submit test certificates of theoffered item along with supply, as per is provisions free of cost. thementioned quantity is subject to change 20% and order for such changedquantity shall be placed. supply quantity variation +/- 2% is acceptable.medium.technical specification:galvanised mild steel tube conforming to is 1239 part-i of 2004 with latestamendments & isi mark, continuously welded, electric resistance weldederw, high frequency induction welded hfiw/hot finished welded hfw, screwed on both ends to is:554/86 for pipe threading, suitable for gas, water & steam application, one end socketed and other end protected withplastic thread protector in random lengths of 5 to 7 mtrs., socket to confirmis 1239 part- ii of 1992 in following sizes.specification parameternamebid requirement allowed values* bidders offering must also comply with the additional specification parameters mentioned above. 5 ; 5 ; o %o % 4 4 /input tax credititc and reverse chargercm details 5 ; 5 ; /itc on gst 5 ; 5 ; /itc on gst cess100%na //o ; e o ; e /consignees/reporting officer and quantity5. .5. ./s.no. //o ; e o ; e /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1nitin surendraghodeswar441401, po:kandri, tah:ramtek, dist:nagpur, maharashtra, 4414011360steel tubes, tubulars and other wrought steel fittings v2 as per is 1239 part 1 33 metric tonne 5 5 1 2 & & % % % % b b < < % % 4 c4 c b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectively9 / 27 bis requiredyes w w /technical specifications* w / as per gem category speci cation /speci cation w w /specificationname b b u u /bid requirementallowed valuesgoverningspecificationsgoverning specificationsgenerally conforming to is 1239 part 1 - latestmaterial, design &dimensionsmanufacturing process oftubeelectric resistance welded or high frequncyinduction welded erw or hfiwend condition of tubescrewed & socketed endclassification of steel tubedepending on wallthicknessmediumsurface condition of thetubegalvanized tubenominal bore of tube mm50additional specification parameters - steel tubes, tubulars and other wrought steel fittings v2as per is 1239 part 1 33 metric tonne specification parameternamebid requirement allowed valueseligibility criteria:the bidder should upload bis license issued to manufacturer for offereditem valid as on the date of bid opening. copy of the valid bis license shouldbe uploaded, failing which the offer submitted by bidder shall be liable to beignored. make/ manufacturer name and brand name of the offered itemmust be clearly specified by the bidder.pre-qualifying condition:the bidder should have supplied tendered product s during preceding 3financial years i.e. current year and three previous financial years as ondate of opening of the bid as per the following criteria: i single order of atleast 35% of quantity under procurement; or ii two orders of at least 20?chof quantity under procurement; or iii three orders of at least 15?ch ofquantity under procurement.pre-qualifying condition-1:guarantee / warrantee:satisfactory performance certificate issued by respective buyer organizationalong with the above orders should be uploaded with the bid. the materialsupplied shall be guaranteed for a period of 12 months from the date ofreceipt at destination towards manufacturing defect, bad workmanship andsubstandard material. such material shall be replaced by you free of cost.test certificates: quantityvariation : class:the successful bidder shall be required to submit test certificates of theoffered item along with supply, as per is provisions free of cost. thementioned quantity is subject to change 20% and order for such changedquantity shall be placed. supply quantity variation +/- 2% is acceptable.medium.10 / 27 technical specification:galvanised mild steel tube conforming to is 1239 part-i of 2004 with latestamendments & isi mark, continuously welded, electric resistance weldederw, high frequency induction welded hfiw/hot finished welded hfw, screwed on both ends to is:554/86 for pipe threading, suitable for gas, water & steam application, one end socketed and other end protected withplastic thread protector in random lengths of 5 to 7 mtrs., socket to confirmis 1239 part- ii of 1992 in following sizes.specification parameternamebid requirement allowed values* bidders offering must also comply with the additional specification parameters mentioned above. 5 ; 5 ; o %o % 4 4 /input tax credititc and reverse chargercm details 5 ; 5 ; /itc on gst 5 ; 5 ; /itc on gst cess100%na //o ; e o ; e /consignees/reporting officer and quantity5. .5. ./s.no. //o ; e o ; e /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1nitin surendraghodeswar441401, po:kandri, tah:ramtek, dist:nagpur, maharashtra, 4414013360steel tubes, tubulars and other wrought steel fittings v2 as per is 1239 part 1 3metric tonne 5 5 1 2 & & % % % % b b < < % % 4 c4 c b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectivelybis requiredyes w w /technical specifications* w / as per gem category speci cation /speci cation w w /specificationname b b u u /bid requirementallowed valuesgoverningspecificationsgoverning specificationsgenerally conforming to is 1239 part 1 - latestmaterial, design &dimensionsmanufacturing process oftubeelectric resistance welded or high frequncyinduction welded erw or hfiwend condition of tubescrewed & socketed endclassification of steel tubedepending on wallthicknessmediumsurface condition of thetubegalvanized tube11 / 27 nominal bore of tube mm15 /speci cation w w /specificationname b b u u /bid requirementallowed valuesadditional specification parameters - steel tubes, tubulars and other wrought steel fittings v2as per is 1239 part 1 3 metric tonne specification parameternamebid requirement allowed valueseligibility criteria:the bidder should upload bis license issued to manufacturer for offereditem valid as on the date of bid opening. copy of the valid bis license shouldbe uploaded, failing which the offer submitted by bidder shall be liable to beignored. make/ manufacturer name and brand name of the offered itemmust be clearly specified by the bidder.pre-qualifying condition:the bidder should have supplied tendered product s during preceding 3financial years i.e. current year and three previous financial years as ondate of opening of the bid as per the following criteria: i single order of atleast 35% of quantity under procurement; or ii two orders of at least 20?chof quantity under procurement; or iii three orders of at least 15?ch ofquantity under procurement.pre-qualifying condition-1:guarantee / warrantee:satisfactory performance certificate issued by respective buyer organizationalong with the above orders should be uploaded with the bid. the materialsupplied shall be guaranteed for a period of 12 months from the date ofreceipt at destination towards manufacturing defect, bad workmanship andsubstandard material. such material shall be replaced by you free of cost.test certificates: quantityvariation : class:the successful bidder shall be required to submit test certificates of theoffered item along with supply, as per is provisions free of cost. thementioned quantity is subject to change 20% and order for such changedquantity shall be placed. supply quantity variation +/- 2% is acceptable.medium.technical specification:galvanised mild steel tube conforming to is 1239 part-i of 2004 with latestamendments & isi mark, continuously welded, electric resistance weldederw, high frequency induction welded hfiw/hot finished welded hfw, screwed on both ends to is:554/86 for pipe threading, suitable for gas, water & steam application, one end socketed and other end protected withplastic thread protector in random lengths of 5 to 7 mtrs., socket to confirmis 1239 part- ii of 1992 in following sizes.* bidders offering must also comply with the additional specification parameters mentioned above. 5 ; 5 ; o %o % 4 4 /input tax credititc and reverse chargercm details 5 ; 5 ; /itc on gst 5 ; 5 ; /itc on gst cess100%na //o ; e o ; e /consignees/reporting officer and quantity12 / 27 . .5. ./s.no. //o ; e o ; e /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1nitin surendraghodeswar441401, po:kandri, tah:ramtek, dist:nagpur, maharashtra, 441401360steel tubes, tubulars and other wrought steel fittings v2 as per is 1239 part 1 1metric tonne 5 5 1 2 & & % % % % b b < < % % 4 c4 c b b /minimum 50% and 20% localcontent required for qualifying as class 1 and class 2 local supplier respectivelybis requiredyes w w /technical specifications* w / as per gem category speci cation /speci cation w w /specificationname b b u u /bid requirementallowed valuesgoverningspecificationsgoverning specificationsgenerally conforming to is 1239 part 1 - latestmaterial, design &dimensionsmanufacturing process oftubeelectric resistance welded or high frequncyinduction welded erw or hfiwend condition of tubescrewed & socketed endclassification of steel tubedepending on wallthicknessmediumsurface condition of thetubegalvanized tubenominal bore of tube mm40additional specification parameters - steel tubes, tubulars and other wrought steel fittings v2as per is 1239 part 1 1 metric tonne specification parameternamebid requirement allowed valueseligibility criteria:the bidder should upload bis license issued to manufacturer for offereditem valid as on the date of bid opening. copy of the valid bis license shouldbe uploaded, failing which the offer submitted by bidder shall be liable to beignored. make/ manufacturer name and brand name of the offered itemmust be clearly specified by the bidder.13 / 27 pre-qualifying condition:the bidder should have supplied tendered product s during preceding 3financial years i.e. current year and three previous financial years as ondate of opening of the bid as per the following criteria: i single order of atleast 35% of quantity under procurement; or ii two orders of at least 20?chof quantity under procurement; or iii three orders of at least 15?ch ofquantity under procurement.pre-qualifying condition-1:guarantee / warrantee:satisfactory performance certificate issued by respective buyer organizationalong with the above orders should be uploaded with the bid. the materialsupplied shall be guaranteed for a period of 12 months from the date ofreceipt at destination towards manufacturing defect, bad workmanship andsubstandard material. such material shall be replaced by you free of cost.test certificates: quantityvariation : class:the successful bidder shall be required to submit test certificates of theoffered item along with supply, as per is provisions free of cost. thementioned quantity is subject to change 20% and order for such changedquantity shall be placed. supply quantity variation +/- 2% is acceptable.medium.technical specification:galvanised mild steel tube conforming to is 1239 part-i of 2004 with latestamendments & isi mark, continuously welded, electric resistance weldederw, high frequency induction welded hfiw/hot finished welded hfw, screwed on both ends to is:554/86 for pipe threading, suitable for gas, water & steam application, one end socketed and other end protected withplastic thread protector in random lengths of 5 to 7 mtrs., socket to confirmis 1239 part- ii of 1992 in following sizes.specification parameternamebid requirement allowed values* bidders offering must also comply with the additional specification parameters mentioned above. 5 ; 5 ; o %o % 4 4 /input tax credititc and reverse chargercm details 5 ; 5 ; /itc on gst 5 ; 5 ; /itc on gst cess100%na //o ; e o ; e /consignees/reporting officer and quantity5. .5. ./s.no. //o ; e o ; e /consigneereporting/officer /address /quantity; ; ; ; /deliverydays1nitin surendraghodeswar441401, po:kandri, tah:ramtek, dist:nagpur, maharashtra, 4414011605 5 : : h h/buyer added bid specific terms and conditions1. genericoption clause: the purchaser reserves the right to increase or decrease the quantity to be ordered upto 25 percent of bid quantity at the time of placement of contract. the purchaser also reserves the right toincrease the ordered quantity up to 25% of the contracted quantity during the currency of the contract atthe contracted rates. the delivery period of quantity shall commence from the last date of originaldelivery order and in cases where option clause is exercised during the extended delivery period the14 / 27 additional time shall commence from the last date of extended delivery period. the additional deliverytime shall be increased quantity original quantity original delivery period in days, subject tominimum of 30 days. if the original delivery period is less than 30 days, the additional time equals theoriginal delivery period. the purchaser may extend this calculated delivery duration up to the originaldelivery period while exercising the option clause. bidders must comply with these terms.2. genericbidder financial standing: the bidder should not be under liquidation, court receivership or similarproceedings, should not be bankrupt. bidder to upload undertaking to this effect with bid.3. genericbidders are advised to check applicable gst on their own before quoting. buyer will not take anyresponsibility in this regards. gst reimbursement will be as per actuals or as per applicable rateswhichever is lower, subject to the maximum of quoted gst %.4. genericbuyer organization specific integrity pact shall have to be complied by all bidders. bidders shall have toupload scanned copy of signed integrity pact as per buyer organizations policy along with bid. click hereto view the file5. genericbidder shall submit the following documents along with their bid for vendor code creation: a. copy of pan card. b. copy of gstin. c. copy of cancelled cheque. d. copy of eft mandate duly certified by bank.6. genericsupplier shall ensure that the invoice is raised in the name of consignee with gstin of consignee only.7. genericwithout prejudice to buyer s right to price adjustment by way of discount or any other right or remedyavailable to buyer, buyer may terminate the contract or any part thereof by a written notice to the seller, if:i the seller fails to comply with any material term of the contract.ii the seller informs buyer of its inability to deliver the materials or any part thereof within thestipulated delivery period or such inability otherwise becomes apparent.iii the seller fails to deliver the materials or any part thereof within the stipulated delivery periodand/or to replace/rectify any rejected or defective materials promptly.iv the seller becomes bankrupt or goes into liquidation.v the seller makes a general assignment for the benefit of creditors.vi a receiver is appointed for any substantial property owned by the seller.vii the seller has misrepresented to buyer, acting on which misrepresentation buyer has placed thepurchase order on the seller.8. genericwhile generating invoice in gem portal, the seller must upload scanned copy of gst invoice and thescreenshot of gst portal confirming payment of gst.9. scope of supplyscope of supply bid price to include all cost components : only supply of goods15 / 27 . purchase preference centrepurchase preference to micro and small enterprises mses: purchase preference will be given to mses asdefined in public procurement policy for micro and small enterprises mses order, 2012 dated23.03.2012 issued by ministry of micro, small and medium enterprises and its subsequentorders/notifications issued by concerned ministry. if the bidder wants to avail the purchase preference, the bidder must be the manufacturer of the offered product in case of bid for supply of goods. traders areexcluded from the purview of public procurement policy for micro and small enterprises. in respect of bidfor services, the bidder must be the service provider of the offered service. relevant documentaryevidence in this regard shall be uploaded along with the bid in respect of the offered product or service. ifl-1 is not an mse and mse seller s has/have quoted price within l-1+ 15% of margin of purchasepreference /price band defined in relevant policy, such seller shall be given opportunity to match l-1price and contract will be awarded for percentage of 25% of total value.11. purchase preference centrepurchase preference linked with local content pp-lc policy:the bid clause regarding preference to make in india products stands modified in this bid and shall begoverned by the pplc policy no. fp-20013/2/2017-fp-png dated 17.11.2020 issued by mop&ng asamended up to date. accordingly, bidders with local content less than or equal to 20% will be treated as non local supplier . the prescribed lc shall be applicable on the date of bid opening. sanctions on thebidders for false / wrong declaration or not fulfilling the local content requirement shall be as per the pplcpolicy. further following additional provisions are added in the certification and verification of local contentprovision of the preference to make in india clause:i. in case of foreign bidder, certificate from the statutory auditor or cost auditor of their own office orsubsidiary in india giving the percentage of local content is also acceptable. in case office orsubsidiary in india does not exist or indian office/subsidiary is not required to appoint statutoryauditor or cost auditor, certificate from practicing cost accountant or practicing charteredaccountant giving the percentage of local content is also acceptable.ii. along with each invoice: the local content certificate issued by statutory auditor on behalf ofprocuring company shall be submitted along with each invoice raised. however, the % of localcontent may vary with each invoice while maintaining the overall % of local content for the totalwork/purchase of the pro-rata local content requirement. in case, it is not satisfied cumulatively inthe invoices raised up to that stage, the supplier shall indicate how the local content requirementwould be met in the subsequent stages.iii. the bidder shall submit an undertaking from the authorized signatory of bidder having the power ofattorney along with the bid stating the bidder meets the mandatory minimum lc requirement andsuch undertaking shall become a part of the contract.12. certificatesbidders offer is liable to be rejected if they dont upload any of the certificates / documents sought in thebid document, atc and corrigendum if any.13. buyer added bid specific atcbuyer added text based atc clausesbidder to confirm clause mentioned in buyer atc in their offer:1. this purchase is also governed by the general terms and conditions: https://gem.gov.in/termscondition 2. delivery schedule: maximum delivery period for offered item should be 60 days from the date of receipt of purchase order. delivery period more than 60 days is not acceptable. o er with delivery period more than 60 days shall be straightway rejected. 3. firm price: prices quoted/bidded shall remain firm till supply is completed satisfactorily in all respects. price variation clause will not be accepted. 4. manufacturer authorization: wherever selling agent/dealer/distributor authorized by the manufacturerare submitting the bid, tender speci c authorization & undertaking certi cate by manufacturer on letter head of pr16 / 27 incipal/manufacturer, mentioning the details such as name, designation, address, e-mail id and phone no., as per annexure-i must be submitted. note: i the authorization should be pre- dated from tender opening date, properly signed and valid.the validity should corresponds to the delivery period stipulated in tender enquiry. ii selling agent/dealer/distributor authorized by the manufacturer shall submit manufacturer authorization as per annexure-i, failing which the offer shall be outrightly rejected. 5. the sellers/bidders who are not in the category of emd exemption: step-i: the intending bidders should submit earnest money of rs.25, 000.00 for schedule-1, rs.25, 000.00 for schedule-2 & rs.25, 000.00 for schedule-3. i.e. rs.75, 000.00 for all 3 schedules mentioned in bid documents to moil ltd., along with their o er otherwise their o er will summarily be rejected. emd should be deposited electronically rtgs/neft from nationalised/ scheduled bank only in the designated account as under: a: name of bank & branch: idbi bank, civil lines branch, nagpurb: account no. 0041102000038465c: ifs code: ibkl0000041 bidder to indicate bid number and name of bidding entity in the transaction details eld at the time of online transfer. bidder has to upload scanned copy/proof of the online payment transfer along with bid. bidders are requested to upload the emd details in format mentioned below. emd should be deposited in one go and exact amount should be re ected in our bank statement on or before the opening date & time of tender, failing which the o er shall be rejected outrightly. step-ii: after remittance of earnest money as above, utr no./reference no. in case of idbi bank should besubmitted by participating bidder in their o er on gem portal. the receipt of emd shall be veri ed by moil ltd., against details of the utr no. /reference no. in case of idbi bank and o ers of those participating bidders whose receipt of emd is confirmed by finance department, moil ltd., shall be considered for further evaluation. in short, mentioning the correct utr no. /reference no. in case of idbi bank in their o er on gem portal is mandatory, failing which the offer shall be rejected outrightly. earnest money by way of demand draft, cheque, bank guarantee, deposit receipt or any other form will not be entertained. i.e. no other mode of payment of emd shall be accepted. emd shall be forfeited if any bidder withdraws their offer before finalization of this tender.note: emd of the successful bidder shall be returned within 30 days of submission of performance bank guarantee/security deposit as per contractual terms or thirty days of successful completion of contract, whichever occurs earlier.format of emd deposited. bid number : name of bidder : bidder pan no. : bidder gstin no. bidder bank account no. bidder bank ifsc code : authorised person name: mobile no.& e-mail id of authorised person : 17 / 27 scheduleno.description of item/categorycorrectutr no. /referenceno.& dateamountrs.1lot no-1 g.i. pipe, size: od:115.0-113.1mm, wall thickness: 4.5 mm, nb: 100mm 25, 000/-2lot no-2 g.i. pipe, size: od: 166.5-163.9mm, wall thickness:4.8mm, nb: 150mm 25, 000/-3lot no-3 g.i. pipe, size: od:34.2 33.3mm, wall thickness: 3.20mm, nb: 25mm 25, 000/-lot no-4 g.i. pipe, size :od: 60.8 59.7mm, wall thickness: 3.60mm, nb: 50mmlot no-5 g.i. pipe, size: od: 21.8 21.0mm, wall thickness: 2.6mm, nb: 15mmlot no-6 g.i. pipe, size :od:48.8 47.9mm, wall thickness: 3.2mm, nb:40mm enclosed: payment receipt towards above utr no. /reference no. signed:designation:corporate seal: 6. for emd exemption bidders: the bidder seeking emd exemption, must submit the valid supporting document for the relevant category as per gem gtc with the bid may refer point no.4xiii, n of gtc general terms & conditions with amendments, if any. under mse category, only manufacturers for goods and service providers for services are eligible for exemption from emd. traders are excluded from the purview of this policy. in absence of valid emd exemption document, the bid will be out- rightly/summarily rejected and no correspondence in this regard shall be entertained. step i: the participating bidders under this category should mandatorily mention the exemption document type in their offer on gem portal.step-ii: upload the relevant document in the upload link on gem portal. the status of mse shall be decided based on the uploaded document and if found in line then only, their offer shall be considered for further evaluation. in short, mentioning the exemption document type in their o er on gem portal & uploading the same on gem portal is mandatory, failing which the o er shall be rejected outrightly. c: psus: state/central govt. organization/psus are exempted from submission of emd/sd. however, they should mandatorily mention the document type in their o er on gem portal for getting exemption andupload the relevant document with their o er on gem portal, failing which the o er shall be rejected outrightly. 18 / 27 . supplier shall ensure that the invoice is raised in the name of consignee with gstin of consignee only. please provide details of contact person name, designation, mobile & e-mail id for correspondence. 7.1 for madhya pradesh state mines/plant: the material shall be despatched & invoiced from supplier s invoicing location & invoice should be generated on consignee as per bid document. i.e. in the tax invoice to be issued by the supplier, ship to party & billed to party will be: consignee as per bid document with gstn: 23aaacm8952a1zt for madhya pradesh state supply. 7.2 for maharashtra state mines/plant: the material shall be despatched & invoiced from supplier s invoicing location & invoice should be generated on consignee as per bid document. i.e. in the tax invoice to be issued by the supplier, ship to party & billed to party will be: consignee as per bid document with gstn: 27aaacm8952a1zl for maharashtra state supply.8. despatch/transportation through registered common carrier: in the event you are successful tenderer and you intend to dispatch/transport the ordered material by road, it will be through registered common carrier as per guidelines mentioned in the carriage by road act 2007 and subsequent amendments if any. in case of non-compliance, action shall be imposed as deemed fit, as per the above mentioned carriage by road act 2007 . 9. performance bank guarantee: it is mandatory on part of supplier to submit the performance bank guarantee @ 5% of total value of order for period of 14 months as mentioned in bid document. - bank details: moil limited, nagpur- name of the bank & branch: idbi bank, gupta house, ravindranath tagore road, civil lines nagpur-440001- ifs code: ibkl0000389- current account no. 041102000018027.- the pbg will be submitted through structured financial management systemsfms platform- performance bank guarantee to be uploaded on gem portal within 15 days of award of contract on gem, as per general terms and conditions gtc on gem, refer clause no. 7, ii. hard copy to be submitted to jgm fin., moil ltd., moil bhawan 1a katol road, nagpur-440013. performance bank guarantee is to be furnished by a speci ed date generally fteen days after noti cation of award and it should remain valid for a period of sixty days beyond the date of completion of all contractual obligations ofthe supplier, including warranty obligations. the performance security will be forfeited in the event of a breach of contract by the bidder/contractor. it shall be refunded to the bidder/contractor without interest, after he duly performs and completes the contract in all respects but not later than sixty days of completion of all such obligations including the warranty under the contract. 10. declaration under companies act:the firm/individual while submitting the tender should submit the under mentioned declaration duly signed. we declare that none of our proprietor / partner / director of the rm/ company has any relationship within the meaning of section 6 of the companies act 2013 with any of the employee working in moil ltd. or director of moil . if the proprietor / partner / director of the rm/ company has any relationship within the meaning of section 6 of thecompanies act 2013 with any of the employee working in moil ltd or director of moil shall declare the same in his bid. 11. arbitration clause: disputes & arbitration for psus only- all the disputes and di erences arising out of or in any way touching or concerning this agreement between the parties shall be resolved by a reference to the permanent machinery of arbitrators pma i.e. to the sole arbitrator in the department of public enterprises as per the o.m. no. 41/2013-dpegm/fts-1835 dated 22/05/2018 issued by the department of public enterprises, ministry ofheavy enterprises govt. of india and for all purposes of the arbitration the rules and procedure prescribed therein shall be applicable . 12. jurisdiction: all questions, disputes or di erences, arising under, outside or in connection with the tender/or19 / 27 der contract shall be subject to the exclusive jurisdiction of the courts at nagpur only. 13. dispute: in the event of dispute arising out of this contract, the decision of chairman-cum managing director moil ltd. shall be final & binding. 14. no deviation certificate: we certify that, there is no deviation in the o er submitted by us, from the bid/tender terms & conditions on gem portal. in case if there is any di erence in any terms & conditions, the same may be ignored and considered to have been accepted by us into to as per bid document on gem . bidder to upload the no deviation certificate . 15. revised public procurement preference to make in india: it is certified that the tender is compliant to ppp mii order & shall be nalised keeping in view of all its updates. the instant tender shall be inter-alia subject to revised public procurement preference to make in india, order 2017 revision, as amended from time to time bearing no. p-45021/2/2017 pp be-ii issued by the government of india, ministry of commerce and industry, department for promotion of industry and internal trade public procurement section dated 16/09/2020. the tenderers who wish to take the preference under the said order dated 16/09/2020 shall mandatorily be required to submit the requisite documents as prescribed under the public procurement preference to make in india, order 2017- revision. only after satisfactory submission of the requisite documents bene ts under the aforesaid order shall be provided. revised order or any updates may be accessed at dpiits website: https.dipp.gov.in/public-procurements only to facilitate, we may request to refer clause no.9a & b of above order towards verification of local content reproduced hereunder and upload as applicable: a. the class-i local supplier / class-ii local supplier at that time of tender, bidding or solicitation shall be requiredto indicate percentage of local content and provide self-certi cation that, the item o ered meets the local content requirement for class-i local supplier / class-ii local supplier, as the case may be. they shall also give details of the locations at which the local value addition is made. b. in cases of procurement for a value in excess of rs.10 crores, the class-i local supplier / class-ii local supplier shall be required to provide a certificate from i statutory auditor or cost auditor of the company in the case of companies orii a practicing cost accountant or practicing chartered accountant in respect of suppliers other than companies giving the percentage of local content. in event of non-submission of the above documents, your offer shall be liable to be ignored. kindly upload the certi cate giving the percentage %of local content and give details of the locations/addresss at which the local value addition is made. as per revised public procurement preference to make in india, order 2017, on 16/09/2020 enclosed, clause no.3, bidder to mention in which category their firm belong i.e. class-i local supplier/ class-ii local supplier/ non-local supplier. kindly upload the certificate by mentioning the class. in view of above, you are requested to kindly provide the self-certi cation as we certify that items o ered/quoted in tender has got % of local content and the details of the locations at which the local value addition is made is . bidder to submit the % of local content & location of local content with their offer. 16. restrictions on public procurement from certain countries: in this regard bidder may please refer o ce memorandum no. 6/18/2019-ppd dt.23-07-2020 & subsequent orders issued by public procurement division, department of expenditure, ministry of finance, government of india towards restrictions on public procurement from certain countries. referring to the above, the local suppliers should submit the certificate as under: we have read the clauses regarding restrictions on procurement from a bidder of a country which shares a land border with india and we hereby certify that our firm is not from such a country and is eligible to be considered . 17. bidder to con rm location from where the materials shall be invoiced upto destination basis as per consignee mentioned in bid document complete address, name of the bidder company/firm along with telephone no. & fax no., name of person, mobile no., e-mail id of the bidder to be given. 18. past supplies: bidders is requested to submit/upload the supply order copies for tendered items as docu20 / 27 mentary evidence towards past supplies from govt. deptt./govt. undertaking, enterprises/customer. 19. taxes: payment of tax is primarily the responsibility of the seller and will not be paid unless it is clearly shown on the quotation as payable extra. any change in taxation during the tenure of contract, will be as per applicable statute. under gst regime registration under gst is made mandatory. you shall mention your gst provisional id s incase your supply is from more than one location mention all relevant gst s in the quotation. offers received from company/ rm/individual without gst provisional id s are liable to be rejected provided they fall within the preview of gst. timely compliance of gst provisions and ling of gst returns is the responsibility of the bidder. any non-compliance may result in withholding of bills partly or fully until it is reflected in form gstr-2a. 19.1 tds under gst shall be deducted as per the applicable gst provisions. 20. bidder/supplier to ensure that the validity of the statutory certi cate /competency certi cate shall be valid during tender finalization and execution stage. 20.1 test certificate: the successful bidder shall be required to submit test certi cates of the o ered item along with supply, as per is provisions free of cost. 21. bidder to submit itr/profit & loss statement/balance sheet to substantiate applicability of gst. 22. treds platform: it may be noted that government of india has implemented trade receivable discounting system treds to address challenges faced by msmes in delayed payments after receipt/acceptance of material/services from government buyers leading to shortfall of working capital. treds is an online electronic institutional mechanism for facilitating the nancing of trade receivables of msmes through multiple nanciers. moil ltd., is already registered on the following treds platform: m/s. a. treds invoicemart, mumbai msme bidders are required to register on the treds platform. the msme vendors can avail the treds facility, if they want to . all mse vendors/suppliers are advised to get themselves registered on treds platform www.treds.in accordingly. 23. bidders who have not performed satisfactorily in the earlier tenders/work orders or have violated the terms of nit, moil ltd. reserves the right to dis-qualify that bidder. 24. integrity pact:a the bidder is required to submit the integrity pact agreement duly lled, scanned & signed by authorized signatory of tender as per enclosed annexure along with the tender document & upload. b a person signing ip shall not approach the courts while representing the matters to iems and he/ she will await their decision in the matter. the details of independent external monitor iem nominated for this tender are given here as under: name of independent external monitor iem: i shri. cmde rakesh anand, e-mail:- ansem 2000@yahoo.com ii shri. nand kumar mishra, e-mail:- lambodhar2021@gmail.com adidev2014@gmail.com 25. details of the location of mines & plants situated: 21 / 27 name of mines & postal addressoff day/authorityto be contactedkandri minepo-kandri, tah ramtek, distt.- nagpur ms, pin: 441401.tel.: 07114-268179 off.268149 res., 268150noskandrithursday mine manager note: bidder to confirm / accept above clauses along with their offer on gem:sign. & date of authorised signatory: name of authorised signatory: designation of authorised signatory: seal of firm: 26. for technical clarifications if any, you may contact: mr. atul sharma, jt.gmmech., moil bhawan, 1a, katol road, nagpur-440 013. mobile no. 7709045650 email: ats@moil.nic.in for commercial clarifications if any, you may contact: mr. d. i. khan, agmmaterials, moil bhawan, 1a, katol road, nagpur-440 013. contact no. 0712-2806140 mobile no. 7387411115 email: khan@moil.nic.in 27. annexure-a format for undertaking to be submitted/uploaded by bidder along with the tender documents i name and designation appointed as the attorney/ authorized signatory of the bidder including its constituents m/s. hereinafter called the bidder the purpose of the tender documents for .as per the tender no of moil, do hereby solemnly a rm and state on the behalf of the bidder including its constituents as under: 22 / 27 . i/we the bidders am/are signing this document after carefully reading the contents of the above mentioned tender. 2. i/we declare and certify that i/we have not made any misleading or false representation anywhere in the tendersubmitted including the annexure thereto. 3. i/we also understand that my/ our o er will be evaluated based on the documents/credentials submitted along with the offer and same shall be binding upon me/us. 4. i/we declare that the information and documents submitted along with the tender documents by me/ us are complete and correct and i/we are fully responsible for the authenticity and correctness or the information and documents, submitted by us. 5. i/we understand that at any time during process for evaluation of tenders, if any information / document submitted by me / us are found to be suppressing facts / forged / false / fabricated / fudged or incorrect, it shall lead to forfeiture of the emd, if submitted and initiating any legal action as deemed t the moil. further, i/we...........................name of the bidder and all my/ our constituents understand that my/ our offer shall be summarily rejected. 6. i/we also understand that at any time after award of contract, if the certi cates submitted by me / us are found to be suppressing facts / false/ forged/ fabricated / fudged or incorrect, it may lead to termination of the contract, along with forfeiture of emd / sd and performance guarantee if submitted, besides any other action provided in the contract and initiating any legal action as deemed fit by moil. 7. we declare that none of our proprietor / partner / director of the rm/ company has any relationship within themeaning of section 6 of the companies act 2013 with any of the employee working in moil ltd or director of moil . 8. we have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with india and we hereby certify that our firm is not from such country and is eligible to be considered . 9. we certify that, there is no deviation in the o er submitted by us, from the bid/tender terms & conditions on gem portal. in case if there is any di erence in any terms & conditions, the same may be ignored and considered to have been accepted by us in to to as per bid document on gem . 10. despatch/transportation through registered common carrier:in the event you are successful tenderer and you intend to dispatch/transport the ordered material by road, it will be through registered common carrier as per guidelines mentioned in the carriage by road act 2007 and subsequent amendments if any. in case of non-compliance, action shall be imposed as deemed t, as per the above mentioned carriage by road act 2007 . seal and signature of the bidder place: date:23 / 27 28. annexure - bformat of non-collusive tendering certificateto be signed by an authorised person on the tenderer s behalf to, moil limited, nagpur. dear sir/ madam, non-collusive tendering certificate for rfq/ tender no. date 1. we, names of the tenderers of address es of the tenderers refer to the bid/ o er against the tender . 2. non-collusionwe represent and warrant that in relation to the tender: a our bid was developed genuinely, independently and made with the intention to accept the contract it awarded; b our bid was not prepared with any agreement, arrangement, communication, understanding, promise of undertaking with any person including any other tenderer or competitor regarding:i prices;ii methods, factors or formulas used to calculate prices;iii an intention or decision to submit a bid;iv an intention or decision to withdraw a bid;v the submission of bid that does not conform with the requirements of the tender;vi the quality, quantity, speci cations or delivery particulars of the products or services to which this tender relates; andvii the terms of the bid, and we undertake that we will not, prior to the award of the contract, enter into or engage in any of the foregoing. 3. disclosure of in case of job/ project contractswe understand that we are required to disclose all intended sub-contracting arrangements relating to the tender tothe plants/ mines--------, moil limited, place -------------, including those which are entered into after the contract is awarded. we warrant that we have duly disclosed and will continue to disclose such arrangements to the plants/ mines --------, moil limited, place ------. 4. consequences of breach or non-compliancewe understand that in the event of any breach or non-compliance with any warranties or undertakings in this certi cate, the plants/ mines, moil limited, place may, at its discretion, invalidate our bid, exclude us in future tenders, pursue damages or other forms of redress from us including but not limited to damages for delay, costs and expenses of re-tendering and other costs incurred, and /or in the event that we are awarded the contract terminate the contract. signed for and on behalf of the tenderersignature: 24 / 27 name:position:date: 29. annexure - i authorization & undertaking certificate by manufactureron letter head of the principal / manufacturerto, moil limited, moil bhavan, 1-a, katol road, nagpur 440013. sub: gem bid no.: . dear sir, whereas we, m/s name of manufacturer who are established and reputable manufacturers of tendered/offered items having factories at addresses of factoryies, do hereby authorize m/ name & address our agent to submit a bid and execute the resultant contract with you on our behalf against the above tender. we, m/s name of manufacturer also undertake the following: i that, as a matter of our corporate policy, we do not directly quote/ market our products directly to any organization in india except in situations like supplies to oem /oes/ opm, supplies of spares and consumables bundled with supply of equipment, supplies to customers not covered by dealer network due to geographical/ logistics constraints. ii that we will accept the responsibility for the satisfactory execution of orders placed on our authorized agent including warranty/ guarantee obligations. iii that, wherever necessary, we will provide requisite inspection and testing facilities at our works in respect of orders placed on our authorized agent. iv our authorized agents price will not exceed that which we would have quoted. v we hereby accept to extend our full support and commitment for all the terms and conditions including guarantee and warranty as per the conditions of contract, technical speci cations for the goods and services o ered for supply by the above bidder on our behalf against this tender for the entire

State Government

TRN :35198773 | 05 Sep, 2025

Tender Value : 0

Kupwara - Jammu And Kashmir

Tender for gem bids for chechemicals, bid number gem2025b6563573 dated 21-08-2025 bid document1 56 1 1 measuring cylinder 50 ml, measuring cylinder 100 ml, measuring cylinder plastic 500 ml, test tubes 15x150 mm, test tube holder, test tube stand, volumetric pipette 10ml, volumetric pipette 5 ml, volumetric pipette 2 ml, labtray plastic 10x12, pipette stand, stainless steel spatula 12inch, thermometers, beakers 250 ml, milk sample bottles, tilt measure 10 ml capacity, tilt measure 1 ml capacityamyl alcohol, test tubes with screw caps 15 ml, whatmanfilter paper, glass rod, hand gloves, aluminium foil, muslin cloth, apron, glass laboratory bottle with screw cap500 ml, sodium hydroxide solution 500 ml, formaldehyde500 ml, ethanol 500 ml, sodium carbonate 500 g, sodiumbicarbonate 500 g, alizarin powder color indicator 25 g, lab grade sucrose 500 g, starch 500 g, 1 percenthydrogen peroxide 100 ml, urea 500 g, sodium hydroxide500 g, 2percent paraphenylene diamine 50 ml, 1percentiodine solution 100 ml, rosalic acid 10 ml, ethanol 100 percent 500 ml, xylene 500 ml, dpx mountant500 ml, canada balsam 500 ml, potassium hydroxide 500ml, lugol iodine 500 ml, anti serum blood group testing, blood lancets, leishman stain 200 ml, giemsa stain 200ml, acetocarmine 200 ml, borax carmine 200 ml, haematoxylin 200 ml, fehlings solution 200 ml, benedictsreagent 200 ml, cedarwood oil 100 ml, immersion oil 100ml, rectified spirit 500 ml, wbc diluting fluid 500 ml, rbcdiluting fluid 500 ml, blotting paper, hydrogen peroxide200 ml, comparative anatomy slides, comparativephysiology slides, endocrinology slides, comparativehistology slides, comparative histology integument slides, protozoa and helminth parasites slides, cotton roll, hydrochloric acid 500 ml, glacial acetic acid 500 ml, sulphuric acid 500 ml, acetone 500 ml, silver nitrate 10 g, formalin 1 can, colchicine 1 g, potassium chloride 500 g, glycerol 500 g, methyl orange 100 ml, safranin 100 ml, agar agar 200 g, glucose 500 g, ascorbic acid 500 ml, haemometer, purified sodium chloride 500 g, dissectionboxes, lab gloves, scoliodon, clarias batrachus, heteropneustes fossils, prawn, crustacean mountingspecimen, litmus paper, ph paper, ph buffer tablets 5 7 9, entomological pins, ethyl acetate 200 ml, dissectionmaterial

Central Government/Public Sector

TRN :35199042 | 03 Sep, 2025

Tender Value : 0

Lohitpur - Arunachal Pradesh

Tender for gem bids for misc, bib cock steel 15mm, gi gate valve 25 mm, gi gate valve15 mm, bib cock plastic 15 mm, m - seal 100 g pkt, stopcock steel 15 mm, teflon tap half inch x 10 mtr, gi socket15mm, gi socket 25 mm, gi bend 1 inch, gi elbow 1 inch, gi elbow 15mm, gi nipple 15mm x 2 inch long, gi nipple25 mm x 4 inch long, gi nipple 15 mm x 4 inch long, ginipple 25mm x 2 inch long, connection pipe for gyser, health faucet with 8mm dia 1 pt 2 mtr long flexible tube andwall hook, waste pipe for urinal, waste pipe for kitchensink, gi tee 15 mm, gi pipe 15 mm 6mtr, gi pipe 25 mm6mtr, led bulb 18 watt, led bulb 12 watt, pvc insulatedcopper wire single core 1 sqmm with isi mark, pvcinsulated copper wire single core 1 pt 5 sqmm with isi mark, pvc insulated copper wire single core zero pt 75 sqmmwith isi mark, led tube light 20 watt complete set, switchsocket combined 16 amp, mcb 63 amp 2 pole, insulationtap 25 m, fan capacitor, fan regulator, fuse kit kat 63amp, socket 6 amp, wooden scantling 3 inch x 2 inch x 12feet class a hard wood without knot and crack, woodenscantling 3 inch x 3 inch x 12 feet class a hard woodwithout knot and crack, wooden beading 2 inch x zero pt 5inch x 12 feet class a hard wood without knot and crack, plywood 8 feet x 4 feet x18 mm with isi mark, plywood 8feet x 4 feet x 12 mm with isi mark, steel screw 1 inch, steel screw 1 pt 5 inch, steel screw 2 inch, ms hinges 6inch, ms hinges 4 inch, ms hinges 3 inch, emery papernumber 60, pbs roll 20 mtr long, steel cutter blade 4 inch, circular blade 10 inch for wood cutter machine, thinner, paint po red with isi mark, paint sky blue with isi mark, wood primer, paint white with isi mark, painting brush 5inch, painting brush 4 inch, painting brush 3 inch, lime, geru, wall putty /bid number: gem/2025/b/6573469* /dated: 21-08-2025 & & / bid document1 / 39

Central Government/Public Sector

TRN :35199052 | 05 Sep, 2025

Tender Value : 0

Lohitpur - Arunachal Pradesh

Tender for gem bids for misc, bid number gem2025b6574318 dated 21-08-2025 bid document1 59 1 1 distemper white with isi mark, paint golden brown with isimark, wooden scantling 3 inch x 3 inch x12 feet, plywood8 feet x 4 feet x 6 mm with isi mark, door handle 6 inch, door handle 4 inch, wooden screw 1 inch, wooden screw 1pt 5 inch, tower bolt 6 inch, ms hinges 3 inch, gi pipe 15mm 6 mtr long, painting brush 6 inch, painting brush 3inch, window glass 14 inch x 14 inch, lime, led bulb 12w, led tube light 20w, casing caping 1 pt 5 inch x 6 feetlong, thinner, floor tiles 1 feet x 1 feet colour white, carpenter clamp vice 6 feet, stone sharpner, plannerblade, king machine planner blades, looking mirror size 18inch x 24 inch, exhaust fan 200 mm with rust proof bodywith isi mark, ppgi sheet 14 feet long x width of sheet aftershaped 1080 mm thickness 0 pt 5 mm colour brick red withisi mark, ppgi sheet 10 feet long x width of sheet aftershaped 1080 mm thickness 0 pt 5 mm colour brick red withisi mark, self driven screw 3 by 4 inch x 1 inch long, ppgiridge 3000 x 600 mm thickness 0 pt 5 mm with isi mark, gypsem ceiling board 2 feet x 2 feet with accessories withisi mark, electric wire 2 pt 5 sqmm with isi mark, electricwire 1 sqmm with isi mark, switch and socket combination15 oblique 16 amp, switch and socket combination 5oblique 6 amp, angle holder, paint white, paint yellowwith isi mark, paint green with isi mark, painting brush 4inch, wc indian type with all fitments including cistern andsear cover with isi mark, wc europeon type with allfitments hooks jet includings cistern and seat cover with isimark, wash basin complete set, floor trap 4 inch dia, ptrap, steel towel stand, cp long body bib cock 15 mm dia, cp short body bib cock 15 mm dia, cp angle cock, cp pillercock 15 mm dia, cp basin mixer, wall mixer three in one, two way bib cock 15 mm dia, health faucet 15 mm dia, cp shower hose pipe 1 pt 5 mtr long, cp over head showerwith arm, cp hand shower with flexible arm, soap stand sssteel, cp waste coupling for wash basin 32 mm dia, cpextension nipple 1 inch long, cp extension nipple 1 pt 5inch long, cp extension nipple 2 feet long, cpvc pipe 1inch x 10 feet long, cpvc pipe half inch x 10 feet long, cpvc tee half inch, cpvc tee 1 inch, cpvc elbow half inch, cpvc elbow 1 inch, cpvc socket half inch, cpvc socket 1inch, cpvc bend half inch, cpvc bend 1 inch, cpvc brasselbow half inch, cpvc brass elbow 1 inch, cpvc nail clamphalf inch, cpvc nail clamp 1 inch, cpvc fapt 1 inch, cpvcfpat half inch, cpvc mapt 1 feet, cpvc mapt half inch, cpvc end cap 1 inch, cpvc end cap half inch, cpvc tanknipple 1 inch, cpvc tank nipple half inch, cpvc reducerelbow 1 inch x half inch, cp flange, cp waste jali 50 mmdia, cp waste jali 75 mm dia, cp waste jali 100 mm dia, taflone tape, cpvc solvent 118 ml pack, pvc waste pipefor wash basin, float valve 25 mm dia complete set, glasspanes 4 feet x 4 feet x 4 mm, floor tiles non skid 300 mm x300 mm bathroom tiles, floor tiles mat finsih 600 mm x600 mm, wall tiles 300 mm x 450 mm, non skid floor tiles2 feet x 2 feet, white cement, tile cutting blade 110 mm

Central Government/Public Sector

TRN :35199538 | 11 Sep, 2025

Tender Value : 0

Kamrup - Assam

Tender for gem bids for bio, tuberculine, tourniquet, blood grouping and rh typingreagent, hemospot, mgg stain, giemsa stain, liquiplastin reagent, p time cup with magnetic ball, deionozed water, glucometer strip ambitech, bio radcontrol

corporations/Associations/Others

TRN :35183312 | 26 Aug, 2025

Tender Value : 0

Idukki - Kerala

Tender for auction sale of dismantled gi pipes and tubes, gi sheets and ms angles

Related Searched Keywords : gi tube

List of gi-tube Tenders

Tender for supply of gi pipe of 80 mm for day to day maintenance of tube well in shalimar bagh constituency ac 14 re invite nit no. 14 2025-26m-vi item no. 09

Tender for gem bids for bio, tuberculine, tourniquet, blood grouping and rh typingreagent, hemospot, mgg stain, giemsa stain, liquiplastin reagent, p time cup with magnetic ball, deionozed water, glucometer strip ambitech, bio radcontrol

Tender for auction sale of dismantled gi pipes and tubes, gi sheets and ms angles

Get gi tube Tender Alert...

Related Searched Keywords : gi tube

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us