Filters

List of gi-hook Tenders

List of latest gi-hook Tenders in Indian Tenders. Click on any gi-hook Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for gi-hook Tenders.

All-Tenders (15)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35766126 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Dausa - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Central Government/Public Sector

TRN :35713173 | 15 Nov, 2025

Tender Value : 0

Kozhikode - Kerala

Tender for gem bids for l3 stackable routing switch with 100ge fiber uplink ports, 24 port l2 10g access and switch, 8 port gigabit networkswitch with sfp ports, 10g duplex sfp duplex transceiver, 17u network floor mount rack, 12u network wallmountrack, 6 u network wallmount rack, 24 port loaded patchpanel, closed cable manager, 1 mtr cat6 patch cord, 3mtr cat6 patch cord, smb, faceplate single, cat6 i osocket, rack cooling fan with power cord, rack hardwarecagenut pack of 10, 48 port duplex lc loaded liu, 12 portduplex lc loaded liu, 6 port duplex lc loaded liu, 1mtrlc lc duplex patch cord, 3 mtr lc lc duplex patch cord, 6socket pdu, 1kva ups, supply of cat6 cable, laying ofcat6 cable, supply of 48 core optical fiber cable, layingof 48 core optical fiber cable, supply of 12 core opticalfiber cable, laying of 12 core optical fiber cable, supplyof 6 core optical fiber cable, laying of 6 core optical fibercable, ofc splicing charges, 32mm hdpe pipe with allaccessories, channelling and conduiting of hdpe pipe, supply of 20mm pvc conduits with accessories ivory, supply of 25mm pvc conduits with accessories ivory, digging laying of hdpe water pipe in hard soil tar roadconcrete, 4 meter gi steel supporting pole for cableequipment mounting, laying of pvc conduits, supply 1run of 2.5 sqmm electrical cable, supply 1 run of 1.5sqmm electrical cable, laying of copper cable, cast ironcable route marker with angle iron leg 2ft with painting isiapproved, supply and laying of stay wire for overheadcable laying, fixing of1 nos of 16a socket controlled by 1switch with surface mounted box modular, supply of1 nosof 16a socket controlled by 1 switch with surface mountedbox modular, microfiber 6 inch hook and loop cord ties forcable management 50 nos, installation testing andcommissioning charges

Central Government/Public Sector

TRN :35713661 | 11 Nov, 2025

Tender Value : 0

Himatnagar - Gujarat

Tender for gem bids for unbranbded, bowl ss, kidney tray, clip towel x-action, forceps towelmayo, cannula suction poole, forceps adson, forcepsdsctg waugh, forceps artery crile, forceps artery spwells, forceps allis tissue, forceps babcock, forcepsartery mixter, forceps kocher, forceps dsctg, mayoscissors, metzenbaum scissors, metzenbaum-nelsonscissors, needle holder mayo-hegar, retractorlangenbeck, retractor roux, c retractor, forcepsartery mosquito, forceps sterilizing cheattle, retractordeaver, retractor doyen, retractor, hook skin, proctoscope gabriel adult, clamp intestinal kocher, forceps intestinal kocher, scalpel, director brodie withmalleable probe and tongue, skin staple remover, forceps bone cutting, nibbler rongeur, humbys knief, forceps renal calculus randall, saw gigli single wire, handle for gigli saw, curette, forceps ligaclip, retractormollison, bulldog clamp debakey, clamp vena clavasatinsky, elevator farabeuf, raspatory doyen, retractorgil vernet hylam, retractor landon, core biopsy gun, self retaining markham mayerding

Central Government/Public Sector

TRN :35715918 | 15 Nov, 2025

Tender Value : 0

New Delhi - Delhi

Tender for gem bids for 917 00008 bearing inner race , 907 52800 bearing tapper roller 35 x 65 x 18 , 829 31077 spacer layshaft o d 72 point 5 x i d 63 point 5 , 828 10222 o ring 20 x 1 point 6mm , 459 70181 shaft selector , 916 00008 bearing 14 dia ball , 917 02400 bearing needle roller , 904 50027 seal oil baffle , 917 51400 bearing needle thrust , 917 10000 bearing needle roller , 826 10707 screw bleed , 40 303533 plug adaptor , 831 10298 bush selector fork , 40 303518 kit shim 64 point 5 od x 57 id , 917 02700 bearing needle roller , 40 303524 plate baffle oil , 917 10006 bearing needle thrust , 917 50600 bearing needle roller , 828 10180 o ring , 828 10181 o ring 130mm i d , 332 y8132 plate counter , 647 02108 tube , 821 00433 clip , 821 10297 clip p clip 25mm dia , 821 10319 clip 9 point 5mm dia pinch type , 334 y5420 filler filler tube , 32 y4449 screw hex 3 by 8 inch unf x 1 by 2 inch torque 50 55nm , 913 00036 clevis , 913 00014 pin clevis , 333 y6028 brake hose 1 by 4 x580m , 333 y6027 brake hose 1 by 4 x760m , 320 08583 pulley cooling fan 1 point 16 1 d 143mm , 128 d8796 bracket throttle , 821 10477 clamp hose spring band , 331 68877 bracket exhaust mounting , 332 y8521 pipe pre cleaner , 332 y9882 adaptor scavenge , 646 04451 bowl , 718 20232 lead grid heater positive feed , 718 20234 lead grid heater positive , 123 05247 clip cable , 728 26800 unit ecu cold start , 721 11846 harness gird heater control , 334 y7784 mount sensor , 334 y8101 harness grid heater , 334 y6848 fan cowl , 834 10764 hose hyd oil cooler , 334 y0931 bracket mounting centre , 334 y2233 clip hose , 334 y3289 strip sealing 1980 m , 335 y0613 bracket side panel mounting , 335 y0614 bracket side panel mounting , 334 y0568 plate anti re circ , 334 y4041 strip sealing , 334 y5395 hose lp 2400 mm , 334 y2232 bracket hose guide , 821 10416 clip pipe approx 27mm dia , 333 y1764 spacer fan 32 point 5mm , 320 08587 bracket idler non ac , 320 08595 bearing idler pulley , 320 08594 circlip , 320 08593 washer idler retainer , 320 08631 bolt flange head m10x50 , 333 y5330 bracket , 333 y5161 baffle pre filter , 333 y6092 bracket , 646 05078 jaw clamshovel , 128 17521 pivots clam jaw , 400 p6248 ram bucket 100x45 , 811 20008 pin pivot 600mm 23 inch wide jaw , 1089 0005 collar , 400 p9452 pin 44 point 45 44 point 35x273 , 400 r5051 bush 55 by 45 , 336 d0542 hydraulics jaw bucket , 40 303759 tooth bucket , 40 301088 ram extended dipper , 40 301958 pin pivot unqin , 811 50373 pin pivot , 811 90183 pin pivot , 123 06189 pad top wear , 331 27389 pad wear strip , 1318 3410z bolt , 1315 0811z bolt m20 x 45 long , 1370 0702z nut thin m20 , 331 30894 plate spreader , 333 g6734 pin locking 44 dia x 210 , 332 y2824 hose 332 y2824 t port aux valve to , 123 03285 pipe , 335 b8094 plate bulkhead , 332 y3191 bracket right side return to stock , 335 g7068 bracket support , 1612 2057 adapter , 130 07241 arm fork , 130 07245 stopper , 535 00103 side cutter , 535 00102 side cutter , 918 00400 hook , 539 03501 link 1 point 25 ton , 335 y0529 hose 12 bsp hp 600 , 335 y0009 valve regular flow , 335 y1389 hose 12 bsp hp 470 , 40 301863 hose , 334 y0469 manifold ga valve , 333 y3532 valve pressure relief , 332 y7548 bracket hanger , 336 a7939 valve c w adapter , 336 d6154 plug , 336 d6155 cap , 255 35203 mount resilient , 320 07280 filter fuel assembly , 333 y7562 rubber pad 30x20x12 , 334 y3554 port adaptor , 334 y8082 bearing liner , 334 y8447 pad foam , 335 y1129 lift ram , 335 y7270 hose top port , 40 302428 link loader control , 448 05405 nut side diff , 450 00202 flange disc 22 teeth , 450 10403 nut side differential , 450 13302 plug breather , 821 10420 clip 11 point 1 13 point 1 , 826 01768 screw m6 x 25 , 828 00400 grommet , 904 50047 seal , 907 20012 bearing taper roller , 907 50200 bearing roller double row , 907 51600 bearing taper roller , 907 m5375 bearing taper roller , 917 50200 bearing needle roller nk 45 30

Central Government/Public Sector

TRN :35717794 | 07 Nov, 2025

Tender Value : 0

Nagpur - Maharashtra

Tender for supply of one time lock/pad lock seal otl as per specifications: 1. material of hook: galvanised iron gi. 2. wire diameter of hook: 4 to 5 mm. 3. material of body: plastic. 4. size of body minimum : 30 mm width x 15mm height x 10 mm thickness.

Related Searched Keywords : gi hook

List of gi-hook Tenders

Tender for supply of one time lock/pad lock seal otl as per specifications: 1. material of hook: galvanised iron gi. 2. wire diameter of hook: 4 to 5 mm. 3. material of body: plastic. 4. size of body minimum : 30 mm width x 15mm height x 10 mm thickness.

Get gi hook Tender Alert...

Related Searched Keywords : gi hook

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us