Filters

List of foundation-repair Tenders

List of latest foundation-repair Tenders in Indian Tenders. Click on any foundation-repair Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for foundation-repair Tenders.

All-Tenders (10)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

State Government

TRN :35763827 | 10 Nov, 2025

Tender Value : 2.94 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at gups narayanpura - demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). random rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in :cement mortar 1:6 ( 1-cement : 6-sand).cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." stone kharanja : random rubble dry stone kharanja under floor. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work p&f rigid pvc pipe (is:4985 mark) class ii(4 kg. /cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr

State Government

TRN :35757680 | 06 Nov, 2025

Tender Value : 0

New Delhi - Delhi

Tender for repairing of foundation of set no. 01 and set no 02 at b-block vivek vihar bp station nit no-08 ee em m-1/ 25-26 item no. 12

State Government

TRN :35757805 | 06 Nov, 2025

Tender Value : 0

New Delhi - Delhi

Tender for repairing of foundation of set no. 1 and other allied work at abc-i dilshad garden bp station. nit no-08 ee em m-1/ 25-26 item no. 19

Central Government/Public Sector

TRN :35748442 | 07 Nov, 2025

Tender Value : 7.24 Lacs

Chatra - Jharkhand

Tender for repairing backfitment of radiator asyy and its foundation, radiator grill, fan pulley system, etc of cat777d th10 and repairing of cracked chassis and support, by grinding, welding, cutting and rewelding and checking for crakes, etc of cat 777d th-13

Central Government/Public Sector

TRN :35748962 | 07 Nov, 2025

Tender Value : 3.79 Lacs

Chatra - Jharkhand

Tender for dismantling, repairing and back fitment of 02 nos rear suspension assy, tie rod assy and steering arm assy, radiator assy and its foundation and repairing of 01 nos. hydraulic motor and 02 nos centrifugal pump for water sprinkler sl no- wt01 at aocp

Central Government/Public Sector

TRN :35751157 | 08 Nov, 2025

Tender Value : 0

Panchkula - Haryana

Tender for gem bids for prefab storage accomaodation, precast rcc foundationblocks, tmt reinforcement as per design, brick masonaryin class b bricks 230mm, cement, steel structure, asphaltic shingles in color of choice, ccf boards, largeformat italian tiles, vitrified tiling matt, ccf 20mm boardwith adhesive, acp sheet, upvc joinery and doors, ceilingpinewood planks, wires 1 point 5mm, wires 2mm, wires4mm, conduits for wiring, switches 6a, switches 16a, sockets 6a, sockets 16a, sheets and switch cover, exhaustfans, ceiling fans 600mm sweep, led concealed lights6w, cylindrical drum lights 8w, granite in leather finish, rustic dana two coat with joint repairs, exterior apex paint

Central Government/Public Sector

TRN :35735057 | 05 Nov, 2025

Tender Value : 2.16 Lacs

Bokaro - Jharkhand

Tender for following repairing is to be done in drill sl. no. recp-714- 1broken and cracked chassis resetting by hydraulic jack pressure and fixture by v groove cutting by both side 02 nos. and plate reinforcement and operator cabin foundation welding and tra

State Government

TRN :35722850 | 06 Nov, 2025

Tender Value : 0

Balrampur Up - Uttar Pradesh

Tender for gem bids for repair, maintenance, and installation of plant/systems/equipments version 2 - office space; installationwork of thyrister igbt control pannel ac moter drive withcontrol pannel wiring and electric power point. the ratesinclusive wastage, labour .., repair, maintenance, andinstallation of plant/ systems/equipments version 2 - officespace; installation work of dc shunt moter with 3 pointstarter wiring and electric power point. the rates inclusivewastage, labour and other necessary fitting c.., repair, maintenance, and installation of plant/ systems/equipmentsversion 2 - office space; installation work of ac slipringmoter with resistance type starter wiring and electricpower point. the rates inclusive wastage, labour and othernecessar.., repair, maintenance, and installation of plant/systems/equipments version 2 - office space; installationwork of thyrister igbt control pannel dc moter drive wiringand electric power point. the rates inclusive wastage, labour and other necessary .., repair, maintenance, andinstallation of plant/ systems/equipments version 2 - officespace; making a foundation grinder machine size :-15x15x34 brick work in ration 1:3 and cement and coresand with plaster work inculding supply of all mater.., repair, maintenance, and installation of plant/systems/equipments version 2 - office space; making afoundation grinder machine size :- 13x15x37 brickwork in ration 1:3 and cement and core sand with plasterwork inculding supply of all mater.., repair, maintenance, and installation of plant/ systems/equipments version 2 -office space; providing and fixing aluminium cable 10 mm4 core and power conecctive pole to 100 amp 3phase mainswitch completed.welder lab; service provider, repair, maintenance, and installation of plant/ systems/equipmentsversion 2 - office space; installation work of grindingmachine with wiring and electric power point. the ratesinclusive wastage, labour and other necessary fittingcompleted weld.., repair, maintenance, and installation ofplant/ systems/equipments version 2 - office space;making a foundation drill machine size :- 16x24x30brick work in ration 1:3 and cement and core sand withplaster work inculding supply of all materia.., repair, maintenance, and installation of plant/ systems/equipmentsversion 2 - office space; making a foundation grindermachine size :- 16x16x30 brick work in ration 1:3 andcement and core sand with plaster work inculding supply ofall mater.., repair, maintenance, and installation of plant/systems/equipments version 2 - office space; making afoundation pipe leackage testing machine size :-14x14x30 brick work in ration 1:3 and cement and coresand with plaster work inculding suppl.., repair, maintenance, and installation of plant/ systems/equipmentsversion 2 - office space; providing and fixing aluminiumcable 10 mm 4 core and power conecctive pole to 100 amp3 phase main switch completed.plumber lab; serviceprovider, repair, maintenance, and installation of plant/systems/equipments version 2 - office space; installationwork of drill machine with wiring and electric power point.the rates inclusive wastage, labour and other necessaryfitting completed plumber.., repair, maintenance, andinstallation of plant/ systems/equipments version 2 - officespace; installation work of grinder machine with wiring andelectric power point. the rates inclusive wastage, labour //bid details3 / 69 and other necessary fitting completed plumb.., repair, maintenance, and installation of plant/ systems/equipmentsversion 2 - office space; making a foundation grindermachine size :- 14x16x32 brick work in ration 1:3 andcement and core sand with plaster work inculding supply ofall mater.., repair, maintenance, and installation of plant/systems/equipments version 2 - office space; making afoundation drill machine size :- 23x15x33 brick work inration 1:3 and cement and core sand with plaster workinculding supply of all materia.., repair, maintenance, andinstallation of plant/ systems/equipments version 2 - officespace; making a foundation drill machine size :-24x15x34 brick work in ration 1:3 and cement and coresand with plaster work inculding supply of all materia.., repair, maintenance, and installation of plant/systems/equipments version 2 - office space; providingand fixing aluminium cable 10 mm 4 core and powerconecctive pole to 100 amp 3 phase main switchcompleted.rac lab; service provider, repair, maintenance, and installation of plant/ systems/equipmentsversion 2 - office space; installation work of grindermachine with wiring and electric power point. the ratesinclusive wastage, labour and other necessary fittingcompleted rac l.., repair, maintenance, and installation ofplant/ systems/equipments version 2 - office space;installation work of drill machine with wiring and electricpower point. the rates inclusive wastage, labour and othernecessary fitting completed rac lab.., repair, maintenance, and installation of plant/ systems/equipmentsversion 2 - office space; making a foundation powerhacksaw machine size :- 19x43x7 brick work in ration1:3 and cement and core sand with plaster work inculdingsupply of all .., repair, maintenance, and installation ofplant/ systems/equipments version 2 - office space;making a foundation grinder machine size :- 18x18x24brick work in ration 1:3 and cement and core sand withplaster work inculding supply of all mater.., repair, maintenance, and installation of plant/ systems/equipmentsversion 2 - office space; making a foundation drillmachine size :- 15x24x30 brick work in ration 1:3 andcement and core sand with plaster work inculding supply ofall materia.., repair, maintenance, and installation of plant/systems/equipments version 2 - office space; making afoundation drill machine size :- 16x26x30 brick work inration 1:3 and cement and core sand with plaster workinculding supply of all materia.., repair, maintenance, andinstallation of plant/ systems/equipments version 2 - officespace; making a foundation drill machine size :-18x18x28 brick work in ration 1:3 and cement and coresand with plaster work inculding supply of all materia.., repair, maintenance, and installation of plant/systems/equipments version 2 - office space; wiring workit lab multistrand copper 2.5mm wire, power switch andsocket, screw, board the rates inclusive wastage labourand other necessary fitting c.., repair, maintenance, andinstallation of plant/ systems/equipments version 2 - officespace; wiring work copa lab multistrand copper 2.5mmwire, power switch and socket, screw, board the ratesinclusive wastage labour and other necessary fitting.., repair, maintenance, and installation of plant/systems/equipments version 2 - office space; wiring workturner lab multistrand copper 2.5mm wire, power switchand socket, screw, board the rates inclusive wastagelabour and other necessary fitti.., repair, maintenance, and //bid details4 / 69 installation of plant/ systems/equipments version 2 - officespace; wiring work painter lab multistrand copper 2.5mmwire, power switch and socket, screw, board the ratesinclusive wastage labour and other necessary fitt.., repair, maintenance, and installation of plant/ systems/equipmentsversion 2 - office space; wiring work ppl office ac mainline work complete with material; service provider, repair, maintenance, and installation of plant/ systems/equipmentsversion 2 - office space; installation work of bench vicewith nut bolt washer etc. the rates inclusive wastage, labour and other necessary fitting completed rac, fitter, welder la.., repair, maintenance, and installation of plant/systems/equipments version 2 - office space; tin sheadreparing work with nut, bolt, washer, screw etc; serviceprovider, repair, maintenance, and installation of plant/systems/equipments version 2 - office space; masquitenet work in iti campus window with material and fittingcomplete; service provider, repair, maintenance, andinstallation of plant/ systems/equipments version 2 - officespace; work bench repairing work with material and fittingcomplete; service provider

State Government

TRN :35648515 | 07 Nov, 2025

Tender Value : 0

Kolkata - West Bengal

Tender for emergent repair of the damages caused during construction of chiller plant centrally a.c. system by pwd electrical with other related ancillary works in the compound of the g v storied academic building with ten storied foundation from ground floor t wbpwd/ee/bned/niet24/2025-2026

Related Searched Keywords : foundation repair

List of foundation-repair Tenders

Tender for repairing of foundation of set no. 01 and set no 02 at b-block vivek vihar bp station nit no-08 ee em m-1/ 25-26 item no. 12

Tender for repairing of foundation of set no. 1 and other allied work at abc-i dilshad garden bp station. nit no-08 ee em m-1/ 25-26 item no. 19

Tender for repairing backfitment of radiator asyy and its foundation, radiator grill, fan pulley system, etc of cat777d th10 and repairing of cracked chassis and support, by grinding, welding, cutting and rewelding and checking for crakes, etc of cat 777d th-13

Tender for dismantling, repairing and back fitment of 02 nos rear suspension assy, tie rod assy and steering arm assy, radiator assy and its foundation and repairing of 01 nos. hydraulic motor and 02 nos centrifugal pump for water sprinkler sl no- wt01 at aocp

Tender for following repairing is to be done in drill sl. no. recp-714- 1broken and cracked chassis resetting by hydraulic jack pressure and fixture by v groove cutting by both side 02 nos. and plate reinforcement and operator cabin foundation welding and tra

Tender for emergent repair of the damages caused during construction of chiller plant centrally a.c. system by pwd electrical with other related ancillary works in the compound of the g v storied academic building with ten storied foundation from ground floor t wbpwd/ee/bned/niet24/2025-2026

Get foundation repair Tender Alert...

Related Searched Keywords : foundation repair

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us