Filters

List of fire-wall Tenders

List of latest fire-wall Tenders in Indian Tenders. Click on any fire-wall Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for fire-wall Tenders.

All-Tenders (25)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :35782381 | 25 Nov, 2025

Tender Value : 1.75 Crore

Coimbatore - Tamil Nadu

Tender for gem bids for operation, o and monitoring of fhs and fas comprehensivemaintenance of fire alarm and smoke detection systemfirst year comprehensive maintenance of fire alarm andsmoke detection system second year inspection servicecontract for kirloskar make diesel engines first year inspection service contract for kirloskar make dieselengines second year dismantling of existing split case orradially split case type centrifugal pump sets mainelectrical pump 75 hp or 171 cum or hr mather platt make dismantling of existing split case or radially split case typecentrifugal pump sets diesel pump 72 hp or 171 cum or hrmather platt make dismantling of existing split case orradially split case type centrifugal pump sets jockey pump10 hp monoblock suguna make dismantling of valvesfrom the existing fire fighting water pipe line sitc of cclass heavy duty ms pipe fixing the pipe on the wall orceiling 80 mm sitc of c class heavy duty ms pipe fixingthe pipe on the wall or ceiling 100 mm sitc of c classheavy duty ms pipe fixing the pipe on the wall or ceiling 150mm sitc of c class heavy duty ms pipe fixing the pipe onthe wall or ceiling 200 mm sitc of c class heavy duty mspipe fixing the pipe which are under the ground under alltypes of flooring 80 mm sitc of c class heavy duty mspipe fixing the pipe which are under the ground under alltypes of flooring 100 mm sitc of c class heavy duty mspipe fixing the pipe which are under the ground under alltypes of flooring 150 mm sitc of c class heavy duty mspipe fixing the pipe which are under the ground under alltypes of flooring 200 mm dismantling of old orunserviceable butterfly valves supplying fixing testingand commissioning of wafer type butterfly valve 50mm diapn 16 rated supplying fixing testing and commissioningof wafer type butterfly valve 80mm dia pn 16 rated bid number gem2025b6853679 dated 04-11-2025 bid document1 55 1 1 supplying, fixing, testing and commissioning of wafer typebutterfly valve 100mm dia pn 1.6 rated, supplying, fixing, testing and commissioning of wafer type butterfly valve150mm dia pn 1.6 rated, supplying, fixing, testing andcommissioning of wafer type butterfly valve 200mm dia pn1.6 rated, supplying and fixing the following size of nonreturn valves 50 mm non return, supplying and fixing thefollowing size of non return valves 80 mm non return, supplying and fixing the following size of non return valves150 mm non return, dismantling the following size of nonreturn valves 50mm or 80mm or 100 mm dia non return, dismantling the following size of non return valves 150mmor 200mm dia non return, supplying and fixing thefollowing size of foot valves 100 mm dia, supplying andfixing the following size of foot valves 200 mm dia, supplying, fixing, testing and commissioning of installationcontrol valve, supplying and fixing of gate valve 0.5 inch, supplying and fixing of gate valve 1 inch, supply andreplacement of 1 by 2 inch pipe dia pressure gauges, supply and replacement of pressure switch, wrapping ofexisting mild steel pipe, supply and fixing of 25mm gm airrelease valve, suppy and fixing of hose reel drum set, supplying and fixing of hose reel nozzle, supplying andfixing of cotton linen hose, supplying and fixing of suitableglass, providing and fixing of single headed fire hydrantlanding valve, providing and fixing of repeater panel, fabrication, supply and fixing of m.s work, providing onewelder and one khalasi, disconnecting and dismantling ofburnt out induction motor 55kw, disconnecting anddismantling of burnt out induction motor 7.5 kw or 10 hpmonoblock, painting of metals surfaces or pipes orstrucutres, earth work all types of soil in excavation, demolishing cement concrete, dismantling manually or bymechanical serviceable material and disposal ofunserviceable material, earth work in excavation, 12 mmcement plaster, filling available excavated earth excludingrock in trenches, providing and laying in position cementconcrete, brick work with common burnt clay, reinforcedcement concrete work, steel reinforcement for r.c.c. work, centering and shuttering including strutting, propping, supply of concrete closing lid, supply of metal plate closinglid, sitc of ul or en loop powered addressable hooter-cum-strobe, sitc of ul or en loop powered addressable isolatormodule, supply of 2 core 1.5 sq.mm copper conductor, laying of 2 x 1.5 sqmm frls cable, supply of b-checkspares koel care super genuine oil, supply of b-checkspares spinon lube oil filter, supply of b-check sparesfuel filter kit 1.1 ltr, supply of addressable fire alarm

Central Government/Public Sector

TRN :35787784 | 14 Nov, 2025

Tender Value : 1.61 Crore

Port Blair - Andaman And Nicobar Islands

Tender for gem bids for prefab hut / house of size 6.10 m x 7.32 m as per gemdrawing q3, tower fan, teapoy, red cushioned chair, interlocking blocks, pvc gi chain link fencing 50 by 50mmmesh, gi angle 50mm by 50 mm by 5mm, barbed wire in300m roll, planks 10 ft by 1inch by 1point5 inch, streetlight 120 watt, acp wall panelling 4 mm, godrej threedoor steel almirah, study table, study chair, shoe rack, chair with cushion, stainless steel cloth drying stand, pelmet with curtain rods, fire extinguisher 2 kg capacity, dressing table with chair, bathroom mirror with stand, bathroom towel rack, wall lamp, cgi roofing sheet 8ft, cgi roofing sheet 10ft, ms square 50mm, ms square32mm, joint plate 150mm by 150mm by 8mm, cap plate200mm by 150mm by 8mm, nut bolt 12mm dia 3inch long, ms pipe 80mm, base plate 300mm by 300mm by 8mm, nut bolt 16mm dia 2 inch long, nut bolt for foundation16mm dia 450mm long, ms pipe 40 mm class c, cleat50mm by 125mm by 6mm, ppgi sheet 16ft, ppgi sheet12ft, ppgi ridge, steel screw 3inch, red oxide primer, enamel paint, brush 2inch, welding rod 3point 1mm, sand paper, tie and rafter 100mm by 50mm by 4mm msrectangular pipe, bracing 80mm by 40mm by 4mm msrectangular pipe, gi base plate 250 by 250mm by 8mm, gi base plate 200mm by 200mm by 8mm, ms rectangular80mm by 40 mm, gi base plate 200 mm by 200mm by6mm, ms rectangular 80 mm by 40 mm, base plate size120mm by 60mm by 6mm, gi nut bolt 18mm dia 450mmlong, gi nut bolt 16mm dia 450mm long, gi nut bolt10mm dia 50mm long, gi nut bolt 10mm dia 80mm long, ppgi sheet 10ft, ppgi sheet 8ft, ppgi sheet 6ft, weldingrod 3 point 1mm, red oxide primer, paint brush 2 inch, gipipe 100 mm nominal dia and 5point4 mm thickness, giangle 50mm by 50 mm by 6 mm, ms plates 8 mm thick 200mm by 200 mm with 20 mm dia four holes, gi nut andbolts with two washer 60 mm by 18 mm dia, bottom chordrect ms tube 80 mm by 40 mm by 5 mm, top chord rectms tube 80 mm by 40 mm by 5 mm, strut vertical memberrect ms tube 60 mm by 40 mm by 5 mm, diagonal memberrect ms tube 60 mm by 40 mm by 5 mm, truss tiemembers rect ms tube 50 by 40 mm by 3 mm, purline rectms tube 50 by 40 mm by 3 mm, ms angle 50mm by 40 mmby 5 mm, ms flat 50 mm by 5 mm, ppgi sheets 8 ft, ppgisheets 6 ft, ridge sheets, self drilling screw, metal primer, anti rusting paint, distemper, paint brush 1point5 inch, paint brush 2inch, paint brush 3inch, paint brush 4inch, nails d size, binding wire, planks 10ft by1 ft by 1point5inch, zinga paint, metal saw, metal saw blade, pavementsealent, backer rod, heavy duty cordless blower, pvccoated gi chain link fencing, chequred tiles 300mm by300mm by 25mm, wall primer, wall putty, red paint forchequred tiles, paint for steel surface, nails dsize, planks10ft by 1inch by 1point5 inch, white cement, plywood 8ftby 4ft by 19 mm, gi flat 40 mm by 3 mm, gi nut and bolt, gi pipe 50mm, gi angle 50mm by 50 mm by 6 mm, gibarbed wire in 300 m roll, concertina razor wire, ms pipe100 dia, ms pipe 40mm, gi base plate 8 mm thick 250mmby 250mm with four hole, coloured roofing sheet 3ft by12ft, ss screw 3inch with rubber or steel washer, pvccoated gi chain link fencing, gi angle 50 mm by 50 mmby 6 mm, gi pipe 40mm dia 5mm thick, gi flat 40 by 5mm, gi bolt, barbed wire 300 mtr in a roll, lime, chequeredtiles 300mm by 300mm by 25 mm, pvc pipe 4inch dia

Central Government/Public Sector

TRN :35787826 | 15 Nov, 2025

Tender Value : 0

Jammu - Jammu And Kashmir

Tender for gem bids for amp socket with gang box, acrolic sheet, aggregate 20mm, aldrop bolt, aluminium door, aluminium strip, babyconcertina coil, bathroom tiles 1x1, bib cock, bib cockbrass, binding wire, black fill compound, black paint, black plastic ldpe, blue paint, bow handle, bricks, brownpaint, bulk head fitting, casing and caping, ceiling fanwith regulator, ceiling rose, cement, cgi sheet, cgisheet 10 ft, cgi sheet 12 ft, cgi sheet 13 feet, cgi sheet8 ft x 3 feet, ci cover 300x 300 for lc, cistern tank 10 ltr, cloth hook, concrete block, copper pipe, copper prongand glove, cousion sheet with plywood, cover water proof9x12ft, cover water proof 9x9, cushion for double bunkbed, mattress with ply, distemper, door double shutter, door stopper, double bunk with mattress, elbow, ewc, fevicol, fire extinguisher 1 kg, floor tiles, flush tank 10ltr, flushing pvc pipe, gang box, gi strip, gi wire, glassputty, handjet spray, hdpe jerrican 35l, hdpe sand bag, hdpe trapaulin, hellow block, hesco basket, hydrolicdoor closer, insulation tape, iwc, j hook, karandi, laip, lc prong, lc set, ldpe film, led bulb 9w, led tubelight fitting 20w, looking mirror with frame 600mm x450mm, m seal, matress with plywood, mattress for buckbed with ply, mcb 32 amp, ms shoes rack, nails 1 inch, nails 2 inch, nails 3 inch, nails 6 inch, net mosquito wirewith nut bolt fmn, nipple 20mm 4 inch, paint og, p trap 4inch dia, paint brush 4 inch, paint brush 75mm, paint darkbrown, paint green, red paint, paint red oxide, whitepaint, paint, paint yellow, pbs roll 20mmx1m, pipe pvc 4inch dia, plastic chair, plug, ply with cushion for bunk, plywood for false ceiling, plywood 08mm, plywood 10mm, plywood 18mm, plywood 19mm 3x6, plywood 19 mm x 3 ft, plywood 2 x 10mm, plywood, plywood with cushion, plywood 8 mm 3x6, plywood 8 mm x 3 ft x 8 feet, plywood8 feet, primer, putty, pvc casting and capping, pvcelbow 4 inch dia, pvc solvent, pvc wire 1.5 sqmm singlecore, pvc wire 2.5 sqmm single core, sand bag, sand fine, security light 45 w, self tapping screw 100mm long, service wire 10sqmm, shade conical, shower rose steel, syntax water tank 1000 ltrs, water tank 500ltrs, steelalmirah, steel almirah, socket 20mm, srt 6 feet long, srt 8 ft, srt 10 ft, steel chair with cushion, steel tab20mm long body, steel tab 15mm long tab, stop cock20mm, switch board 5 point, water tap, tarpin oil, terminal lightening conductor, thinner, tiles 2 x 2, toiletseat, tuffen tape, urinal port, wall mounting fan, wcwestern type, welding rod, white cement, window glass, window glass size 43cmx36cm, window glass size20cmx22cm, wooden ply 6 mm, 15 amp board, 5 ampboard, tube light, bulb 9 watt, celling rose, secure box, angle holder holder, piano type switch, 2.5 mm copperwire, 1.5 mm copper wire, two core wire 16 mm, mcb 16amp, dp mcb 63 amp, mcb box 04 way, casing capping, pvc box three way, pvc box four way, change over 200amp, pvc gitti 2inch, star screw 2inch, pvc gitti 2 inch, star screw 4 inch, insulation tape role, verified tiles600mmx600mm, drainage mesh 1 ft x 2 ft, girder ismb

State Government

TRN :35771865 | 15 Nov, 2025

Tender Value : 8.62 Crore

Nuh - Haryana

Tender for construction of govt. model degree college at ferozepur jhirka in . including e.i. internal, b.wall, road and parking and fire fighting works announced by honble prime minister of india

Central Government/Public Sector

TRN :35772861 | 14 Nov, 2025

Tender Value : 0

Kolkata - West Bengal

Tender for supply of portable fire extinguishers (v2) isi marked to is 15683 (q2) , wall mounted automatic fire extinguisher (q2)

Central Government/Public Sector

TRN :35775098 | 24 Nov, 2025

Tender Value : 0

Darjeeling - West Bengal

Tender for gem bids for tiles ceremic 300x300mm, load bearing concrete hollowblocks of size 400mm x 200 mm x 200 mm, cement opc43 grad, pbs roll of size and 20.00 mtr long, tarpaulinehdpe laminated 30x20 ft, water proof tarpaulin polythene30x30 ft, wall putty, glass putty, synthetic enamel paintcolour black, synthetic enamel paint colour white, synthetic enamel paint colour og, synthetic enamel paintcolour red, synthetic enamel paint colour blue, syntheticenamel paint colour yellow, synthetic enamel paint colourgreen, synthetic enamel paint colour brown, syntheticenamel paint red oxide, paint brush 2 inch, paint brush 3inch, paint brush 4 inch, pvc door handle, pvc doorhinges, pvc door size 7 x 3 ft, thinner, white cement, black screw 1 inch, black screw 1 point 5 inch, self tapingscrew 25mm, star head screw, chinese screw 1 inch, plywood 8 x 4 x 6mm thick, nails 2 inch, nails 3 inch, hdpelaminated sand bag of size 75 x 40 cm, door curtain rod, ss curtain bracket, cgi sheet 810 x 3050 mm long 0.5mmthick 10 ft, led tube light fitting 1 x 12 w 2 ft, led tubelight fitting 1 x 18 or 22 w 4ft long, led bulb 5 w, ledbulb 7 w, led bulb 9 w, led bulb 12 w, led securitylight 20 watt, 2 core copper wire 3 mm, pvc insulatedcable 1 point 5 sqmm single core copper conductor, pvcinsulated cable 1 point 5 sqmm 2 core copper conductor, cable pvc insulated unsheathed single core flexible copperconductor 1100v grade of size 2 point 5 sqmm, pvc switchbd 4 x 4, pvc switch bd 6 x 4, pvc switch bd 6 x 8, switchsocket 5 amp with box, switch socket 15 amp with box, switch 5 amp, switch 15 or 16 amp, socket 5 amp, socket15 amp, switch socket combination 3 or 5 pin 5 or 6 amp, switch socket combination 5 or 3 pin 15 or 16 amp, plug 3pin 5 or 6 amp, plug 3 pin 15 amp top, insulation tape, pvc insulation tape 2 cm wide 10 mtr long, mcb 6 amp 240v, mcb 20 amp 240 v, mcb 10 amp sp, mcb 16 amps spwith box, mcb 32 amp sp with box, isolator 40 amp dp240v, mcb box b20, mcb box c20, mcb distributionboards in sheet metal enclosure 4 ways double door withblanks confirming to is 8623, mcb distribution bd sheetmetal 8 way, gi gang box 4 way, pvc exhaust fan 150mmsweep, pvc exhaust fan 300mm iron, bed switch on offswitch, piano switch 5 amps, pvc casing caping 25x16 mm, pendent holder, angle holder with skirt, angle holder, pvc ceiling rose 2 or 3 terminal, ppr pipe 20mm dia, pprpipe 3 layer dia 40mm 6 mtr long, ppr socket 40mm, pprtee 40mm, ppr elbow 40mm, ppr female threaded socket20 or 15 mm dia, pvc elbow 25mm, ppr socket 25mm, ppr union 40mm, pvc union 25mm, ppr tee reducer 40 or32mm, pvc tank connector 2 inch, tape teflon, pvcconnection pipe 450mm, towel rail cp 750mm long, hdpetank tank 500 ltr capacity, rotational mouldedpolyethylene water storage tank double layer 1000 ltrcapacity make star or comfort or sintex, bib cock brass15mm, pvc bib cock 20mm, brass stop cock 15mm, pvcstop cock 20mm, ball brass float valve 15mm, ppr stopvalve 20 mm, ball valve 1 inch 25mm, snow white coloureuropean wc with s or p trap concealed of size650x405x770m with sheet cover, wc indian type, wcindian type steel, waste pipe for wash basin, whb steel, wastage pipe for urinal pot, looking mirror 600mm x450mm, fire extinguisher 2 kg

Central Government/Public Sector

TRN :35779002 | 24 Nov, 2025

Tender Value : 0

Indore - Madhya Pradesh

Tender for gem bids for inner structure rooms. , bulletproof paneling and antiricochet treatment of side walls to trap bullets. , door panel , window panel. , anti ricochet flooring , catwalk , shed , noise canceling headsets , general system requirements. , wall moving target , portable targets , control room , lighting , fire fighting equipment. , wiring, electrical fitting, cabling, switches and fire suspension systems. , public address system. , cctv system. , ak 47 series replica weapon 06 kits , 9mm pistol conversion kits 06 kits , 4000 rds of ak 47 and 2000 rds of 9mm simmunitions

State Government

TRN :35763340 | 10 Nov, 2025

Tender Value : 17.65 Lacs

Dausa - Rajasthan

Tender for major repair work under state budget head at govt. sss bilona kalan -demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster (ceiling): 6 mm thick cement plaster to ceiling of mix 1:3 (1cement : 3-fine sand) internal plaster : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :12mm thick. plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. panting on doors & windows :- painting with synthetic enamel paint of approved brand and manufacture to give an even shade : two or more coats on new work "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of 240/415 v ac mcb with positive isolation of breaking capacity not less than 10 ka (b/ c tripping characteristic as per type of load and site requirement) 4kv impulse withstand voltage, as per pwd specification for electrical works with isi marked is 8828(1996) / conforming to iec 60898-1 2002, iec 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per iec, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , ip 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 a rating and 10,000 upto 63 a, 5000 for 80 a rating including making connections, testing etc. as required. . oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .6a to 32a rating. 50 a to 63a rating providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have it's own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure 'a' attached with this bsr 6.0 sq. mm 4 core providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating p & f isi marked (is:3854) 6 amp. flush type non modular switch with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material including cutting hole in tile and making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of of 3/5 pin 6 amp. flush type non modular socket made out from industrial grade polycarbonate or fire resistant abs material, brass terminal with porcelain based back cover & captive screws including cutting hole in tile and making connection testing etc. as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr .

Central Government/Public Sector

TRN :35764468 | 12 Nov, 2025

Tender Value : 50.0 Thousand

Jammu - Jammu And Kashmir

Tender for gem bids for car diary, motor wind, hanging light, fire wall, wallbanner, football t shirt, football, register, cp pluscamera and power cable

State Government

TRN :35765746 | 10 Nov, 2025

Tender Value : 4.90 Lacs

Jaipur - Rajasthan

Tender for demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge: in cement mortar. dismantling stone slab roofing over wooden karries and battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 meter lead: demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer-in-charge. 1: 3: 6 or richer mix. dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. earth work in excavation by mechanical means (hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. all kinds of soils providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - all work up to plinth level. m10 grade nominal mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). supply & stacking good soil of earth at site complete including loading unloading & transportation etc.good soil of earth filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. random rubble stone masonry for with hard stone in foundation and plinth in cement sand mortar above 30 cm thick wall in:cement mortar 1:6 ( 1-cement : 6-sand). centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :columns, pillars, posts and struts etc. centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for : columns, pillars, posts and struts etc. providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement for beams, suspended floors, roofs, griders having slopes up to 15º, landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases etc.m20 grade nominal mix / design mix providing and laying in position specified grade of cement concrete for rcc structural elements upto floor five level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers (if required ) excluding the cost of centering, shuttering and reinforcement for walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.m20 grade nominal mix / design mix roviding m-25 grade concrete by using cement as per codal provision instead of m-20 grade design mix. providing and fabricating reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. thermo-mechanically treated bars (conforming of relevent is code) kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) for area of each slab from 2001 to 5000 sq.cm : kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete for area of each slab upto 2001 sqcm grading roof for water proofing treatment with water proffing compound cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) gola providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. finishing walls with acrylic smooth exterior paint of required shade including all scaffolding. new work (two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:new work (two or more coats) over and including scrapping and priming coat with cement primer. "copping : providing and laying cement concrete including curing, compaction etc. complete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, levelling course etc up to floor five level excluding the cost of centering and shuttering. m20 grade nominal mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)." wiring of light point/ fan point/ exhaust fan point/ call bell point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg hot dipped galvanized modular box with earth terminal, 6 a modular switch, modular face plate with grid plate, 3 pin ceiling rose / lamp holder/ 3 pin connector , screws etc, making connections,all as per pre approved by engineer in charge, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07 . for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . short point (up to 3 mtr.) medium point (up to 6 mtr) long point (up to 10 mtr) wiring of 3/5 pin 6 amp. light plug point as per pwd specification for electrical works with isi marked 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper conductor 1.1 kv grade (is:694) and 1.5 sq. mm nominal size fr pvc insulated unsheathed flexible copper earth conductor 1.1 kv grade (is:694) in recessed isi marked mms ( is:9537 p - iii ) vergin material pvc conduit & it's all accessories( j.b. , bends etc.) , round tiles,18 swg g.i. box with earth terminal of required size, 6 a switch, 3/5 pin 6 a socket, 3.0 mm thick isi marked phenolic laminated sheet (is : 2036 - 1995), al. alloy/ cadmium plated iron screws 20 mm cup washers etc. all as per pre approved by engineer in charge, making connections, testing etc. complete as required. for specification of copper conductor, phenolic laminated sheet's & electrical/ wiring accessories refer chapter e - 04, e - 05 & e - 07. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . on board s&f following sizes (dia.) of isi marked mms ( is:9537 p - iii ) vergin material pvc conduit as per pwd specification for electrical works along with its accessories (is: 3419 ) as required in recess including cutting the wall, covering conduit and making good the same as required. all relative and latest acceptance tests reports by any nabl accredited lab for the conduit shall be submitted before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . mms (9537 p-111)pvc condute.25mm. supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x1.5 sqmm supplying and drawing fr pvc insulated & unsheathed flexible copper conductor as per pwd specification for electrical works with isi marked (is:694) and as per is 8130 : 2013 of 1.1 kv grade . wire should be made from 99.99% purity copper, class 5 stranding in acc. to iec 60228 for lower watt loss , oxygen free ( <10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation pvc type a ,flame retardant as per is 10810-53, better amperage rating as per vde 0298 part 4, , in existing surface or recessed pvc/ ms conduit/casing capping including all as per pre approved by engineer in charge,making connections, etc. as required. oem must have its own in house nabl lab setup for all testing facilities for wires. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 2 x2.5 sqmm providing & fixing of ip20 smd mid power led batten type integrated light fixture made from polycarbonate /extruded aluminium powder coated housing with in built driver , power consumption of 18w/20w ,system lumen efficacy = 120 lm/watt output, internal surge protection of 2.5 kv with short & open circuit protection ,thd < 10% ,p.f.=0.95, cri >80 , life time of minimum 50000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. 1170mm(+/-10%) led batten with min. lumen output 2200 lm providing & fixing of energy efficient /energy saving ip 20 led direct retrofit bulb in existing holder or fixture as required with system lumen efficacy =100 lm/watt output ,pf 0.95 , cri >70, minimum life time of minimum 25000 burning hours with , 70% of intial lumen maintaned till life ends , cct 3000°k / 4000°k / 5700°k /6000°k/6500°k (as per ansi bin) , maximum power consumption should not more than the specified rating and fixture shall be of bis standard and trade mark certificate ( t.c.). manufactures word mark/ name engraved/ embossing/ screen printing on housing. oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate / report from oem shall be submitted. all as per pre approved by engineer in charge . for additional technical parameters of product/ work, refer annexure "a" attacheded with this bsr.6/7 watt providing & fixing of bee star rated copper wounded double ball bearing capacitor start, aluminium body & metallic blade ceiling fan conforming to all the performance requirements laid down in is 374:2019 including all amendments, as applicable ; & carry bis licensing (i.e. isi marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . providing & fixing of isi marked (is:1258) batten/angle lamp holder with cm/l no. printed and made out from industrial grade polycarbonate or fire resistant abs material, brass terminal & captive screwsincluding making connection testing etc. as required. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . p & f 1.2mm thick m.s. recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . all as per pre approved by engineer in charge. for additional technical parameters of product / work refer annexure 'a' attached with this bsr providing & fixing of 240/415 v isolator as per pwd specification for electrical works with isi marked is:13947-iii/conforming to iec 60947-3, suitable for ac22a utilization catagory, 4kv impulse withstand voltage, true contact indication, red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. , label holding facility , ip 20 contact protection and fitted with existing distribution board / sheet including making connections, testing etc. as required. oem shall have submit nabl / cpri / erda accrediated lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 30/40 amp rating . providing & fixing of modular type 120 w step fan regulator duly isi marked (is 11037:1984 ) with cm/l no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with ip-20 rating , including all as per pre approved by engineer in charge,making connections, testing etc. as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr5 step fan regulator 2 module 360 dgree rotating

Related Searched Keywords : fire wall

List of fire-wall Tenders

Tender for construction of govt. model degree college at ferozepur jhirka in . including e.i. internal, b.wall, road and parking and fire fighting works announced by honble prime minister of india

Tender for supply of portable fire extinguishers (v2) isi marked to is 15683 (q2) , wall mounted automatic fire extinguisher (q2)

Tender for gem bids for car diary, motor wind, hanging light, fire wall, wallbanner, football t shirt, football, register, cp pluscamera and power cable

Get fire wall Tender Alert...

Related Searched Keywords : fire wall

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us