Filters

List of fibre-optic-item Tenders

List of latest fibre-optic-item Tenders in Indian Tenders. Click on any fibre-optic-item Tenders to view BOQ, NIT and Tender Documents. Get GeM Registration and Bidding Support, Vendor Registration for fibre-optic-item Tenders.

All-Tenders (5)
|
Today's-Tenders
|
Active-Tenders
|
Closed-Tenders

Central Government/Public Sector

TRN :49054152 | 20 May, 2025

Tender Value : 77.92 Lacs

Abohar - Punjab

Tender for tender for special repair to building no p-137 at mil stn abohar; 1 demolition of cement concrete (un-reinforced) in floors / pavings, (below or above ground level) and of any description and in any position not otherwise complete all as specified and directed by engr-in-charge. 2 material & labour for 75mm thick pcc 1:3:6, type c1, using 20mm graded stone aggregate as in hard standing ,plinth protection/path etc,laid in suitable panels n.exc 3.00 m length finished even and smooth without using extra cement with contraction(dummy)joints 65mm deepx10mm wide joints filledwithbituminous sealing compound of grade ‘a’/bitumen mastic filler/sealant complete all as specified and directed by engr-in-charge. 3 dismantling brick tiles in floor or in roofs laid dry and pointed in any cement mortar complete all as specified and directed. 4 demolition of mud in roofs any thickness incl plastering and leeping 5 m & l for 40mm thick cement concrete type b0 1:2:4, (using 12.5mm graded stone aggregate) as in, surface finished even and smooth without using extra cement 6 m & l 10mm thick rendering in cement mortar 1:3 on fair facesof brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed by engr-in-charge. 7 m&l for preparation of roof top surfaces,providing and applying uv stable single component smart care damp proof ultra is a fiber reinforced elastomeric liquied appplied water proofing membrane formulated with pu hybrid polymers and reinforcing acrylics fibres and having sri of 106 on top of concrete roof surface in three coats including self primer at ratio pf dampproof and water 3:1 and coverage @ 1 ltr/10 sqm with a thickness of 650 micron. note : (i) 6 hrs interval between two coats will be maintained. (ii)the treatment shall be carried out by authorised applicator approved by ge as per the manufacturer(iii)payment will be made after providing warrnty certificate from the company. 8 m&l 40mm thick brick tiles laid/beded including screed bed 15mm thick in cement mortar (1:6) on existing lime concrete sufaces of roof,joints grouted flush in cement mortar (1:3) mixed with liquid wpc @ as per manufacturer instruction per bag of cement of 50kg and including flush pointing as work proceed with same material complete all as specified in clause 11.27.3 of mes sch part-i (2009) complete all as specified and directed by engr-in-charge. 9 m&l 40mm thick brick tiles( old serviceable tiles obtained from demolition/desmantled item shall be reused) laid/beded including screed bed 15mm thick in cement mortar (1:6) on existing lime concrete sufaces of roof,joints grouted flush in cement mortar (1:3) mixed with liquid wpc @ as per manufacturer instruction per bag of cement of 50kg and including flush pointing as work proceed with same material complete all as specified in clause 11.27.3 of mes sch part-i (2009) complete all as specified and directed by engr-in-charge. 10 dismantlingof reinforced cement concrete by chiseling (without affecting other portion) of any description and in any position as in roofs, floors (other than ground floor), beams, landing, chajjas and similar suspended work. 11 m&l reinforced cement concrete 1:1 1/2:3 (nominal mix) using 20mm graded stone aggregate as in slab supported on walls,beams and columns in floors,roofs,landings,balconiies,deck slabs and in shelves and the like all as specified and directed. (form work & reinforcement measured separately). 12 m & l mild steel tmt bars 10mm dia or over cut to length bent to shape required including cranking, hooking ends and binding with ms wire (annealed) not less than 0.90mm dia all as in column, beam etc . 13 m&l for form work to soffits of suspended slabs such as roof slabs,floor slabs,landings and similar work not exc.200 mm thick(horizontal or sloping) rough finish surface of concrete flat all as specified and directed. 14 m&l for precast reinforced cement concrete (1:2:4) type b1 (using 20 mm graded crushed stone aggregate) as in cover slab of drain/manhole set in cm (1:6).note :- cost of form work is deemed to be inclusive of unit rate quoted by the contractor & reinforcementshall be measured & paid separately.) 15 taking down chowkatsor frame with shutters(without taking off shutters from the frame not exceeding 1.50 sqm each & removing to store all as specified. 16 taking down chowkatswith shutters(without taking off shutters from the frame exceeding 1.50 sqm each but not exceeding 4 sqm) 17 taking down wooden shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm each and refixing in same opening after necessary easing, adjustments, minor repairs, oiling, adjustment with cutting or fixing plain fillets/planks made from second class hard wood etc to remove gap between floor and shutter complete all as specified and as directed by engineer-in- charge. 18 taking down wooden shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm eachcomplete all as specified and as directed by engineer-in- charge. 19 s&f factory made single extruded wpc (wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum compressive strength of 58 n/mm2, modules ofelasticity 900 n/mm2and resistance to spread of flame of class a category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with ms hold fast/ lugs/ss dash fasteners of required dia and length complete as per direction of engineer-in-charge. (m.s. hold fast/ lugs or ss dash fasteners shall be paid for separately). note :- for wpc solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and directed . 20 providing and fixing factory made single extruded wpc (wood polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant. wpc to be laminated with pvc foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk s.s screws, all as per direction of engineer- in- charge including supply and fixing following items : (a) stainless steel (304 grade) finished butt hinges 100mm - 4 nos. per leaf (b) stainless steel (304 grade) finished square tower bolt 150 mm long - 2nos per leaf (c) stainless steel (304 grade) finished handles 150 mm - 2 nos. per leaf 21 supply and fixingfactory made pressed steel frames of size 125 x 60mm (thickness of sheet shall be 1.25mm) for doors with one or more rebates including necessary lugs and lock strike plate, etc. , includingbutt hinges suitable nos as directed for each leaf, complete all as specified and as directed by engineer-in- charge. 22 supply and fixingfactory made pressed steel frames of size 105 x 60mm (thickness of sheet shall be 1.25mm) for doors with one or more rebates including necessary lugs and lock strike plate, etc. , including butt hinges suitable nos as directed for each leaf, complete all as specified and as directed by engineer-in- charge. 23 m&l cement concrete 1:3:6 type c-1 using 20mm graded stone aggregate for filling of pressed steel frame and hold fast blocks etc complete all as specified and directed by engineer - in - charge. 24 s & f factory made plain framed, panelled shutter iind class hardwood rail and style 35 mm thickness (two panel) with lock rail and panel of 9 mm b.w.p. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. the size of rail and stile as per is : 1003 (part i), kiln seasoned and chemically pressure treated complete all as specified and directed by engineer - in - charge. 25 s & f factory made 35mm thick iind class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in ssr part – i, section – 8, clause 8.20 (a) ; supplied and fitted to chowkats complete all as specified and directed by engineer - in - charge. 26 s & f100 mm aluminium alloy anodised butt hinges, and fixed with steel scerws for frp doors/pvc door, type b-21complete all as specified and directed by engineer - in - charge. 27 s & f in repair 100 mm mild steel butt hinges, and fixed with steel scerws for wooden doors, complete all as specified and directed by engineer - in - charge.note :- rate deemed including necessary welding etc) 28 s & f tower bolt 200 mm of aluminum complete all as specified and directed by engineer - in - charge. 29 s & f in repair tower bolt 200 mm of aluminum complete all as specified and directed by engineer - in - charge. 30 s & f door handle d type 150 mm of aluminum complete all as specified and directed by engineer - in - charge. 31 s & f in repair door handle d type 150 mm of aluminum complete all as specified and directed by engineer - in - charge. 32 s & f aluminium alloy, anodised, sliding door bolt 300mm with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudedsections or cast-aluminium alloy and fixed. 33 s & f in replacement aluminium alloy, anodised, sliding door bolt 300mm with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extrudedsections or cast-aluminium alloy and fixed. 34 s&f floor door stopper of aluminum allow body and tongue, 150mm overall length, anodised, with hard drawn steel spring, fixed in floor. 35 s&f in repairs floor door stopper of aluminum allow body and tongue, 150mm overall length, anodised, with hard drawn steel spring, fixed in floor. 36 s & f mild steel 300mm ordinary rat rail rod pattern spring inluding roller and roller plate complete all as specified. 37 s & f in repairs mild steel 300mm ordinary rat rail rod pattern spring inluding roller and roller plate complete all as specified. 38 s& fstainless steel curtain rod 25 mm dia , including fancy type brackets and pair of decorated end knobs (finials), stop roller etc.as per site requirement, fixed to wall with fixing accessories,including taking down old existing curtain rods any description complete all as specified and directed by engr-in-charge. 39 s&f factory made box type steel window with side hung shuters both glazed and gauged, shutter frame 60x25mm erw hollow p section with wall thickness not less than 1mm fixed to pressed steel frame 120mmx70mmx1.60mm thick including fixing glazed portion, iron grills 8mm suare ms barhinges with steel handle and fitting, lugs etc., including one shop coat of primer complete all as specified.(drg no btd889 sheet 1/4 ).note :- (i) wire mesh and glass shall be measured and paid separately under relevent items of sch/boq.(ii)measurement for payment shall be the opening area of the window between inner edges of wall. 40 s&f factory made box type steel window with side hung glazedshutter, frame 60x25mm erw hollow p section with wall thickness not less than 1mm fixed to pressed steel frame 120mmx70mmx1.60mm thick including fixing glazed portion, iron grills 8mm suare ms barhinges with steel handle and fitting, lugs etc., including one shop coat of primer complete all as specified.note :- (i)wire mesh and glass shall be measured and paid separately under relevent items of sch/boq.(ii)measurement for payment shall be the opening area of the window between inner edges of wall. 41 s&f stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm all as specified. 42 s & f in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm all as specified. 43 s & f 4 mm thick sheet glass ordinary quality and glazing within square not exceeding 0.50 sqm including aluminium cleat/rubber beading in each pane complete all as specified and directed by engineer - in - charge. 44 supply & fixing aluminium anodisedframes/chowkhats,shutter and like made out of aluminium sectionpowder coated(minimum thickness of powder coating not less than 50 micron) for window, ventilators and aluminium partition with one or more rebates or without rebate including joining cleat for fixing etc., the top and bottom horizontal members and vertical members adjacent walls shall be fixed with floor, ceiling walls and cills where required and fixing with the help of rawal plug and screw or with fixing clip or with expansion hold plate fasteners. aluminium section shall be smooth, rust free, straight mitred and jointed mechanically where ever required complete all as specified and as directed by engineer-in-charge.. 45 s & f figured glass 4 mm thick pin head type and glazing withnot exceeding 0.50 sqmincluding aluminium cleat/rubber beading in each pan complete all as specified and directed by engineer - in - charge. 46 material and labour for machine cut 16 to 18 mm thick, kota stone slab (size of slab not less than 500x550mm for flooring and in single piece for treads of staircase), laid over and including 20 mm thick bedding layer in cement mortar (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing /grinding (mirror finish) andpolishing by machine, including machine cutting to make it square or rectangular as per site complete all as specified and as directed by engineer-in-charge. 47 material and labour for machine cut 16-18mm thick, kota stone slab as in skirting, dado and on pillar, laid over and including 10 mm thick bedding layer in cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing /grinding (mirror finish ) and polishing by machine, including machine cutting to make it square or rectangularcomplete all as specified and as directed by engineer-in-charge. 48 taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc. 49 m & lfor rendering 15mm thik on fair faces of brick work in cement mortar 1:6 finished even & smooth without using extra cement. 50 m & lfor rendering 15mm thick on fair faces of brick work in cement mortar 1:4 finished even & smooth without using extra cement. 51 m&l rendering10 mm thick in cement mortar 1:3 on fair faces of concrete surfaces of ceiling finishing even and smooth without using extra cement. 52 m&l integal water proofing compound 53 preparation of new plastered surfaces/existing platered surfaces and applyingwall care putty in internal/external walls/rcc surfaces/soffits of chajjas/roof projections/cantilevers/balcony/ceilings etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior/exterior painting complete all as specified and directed.note : (i) the prepared surface after wall putty, the contractor will inform to the ge as well as to the engineer-in-charge for site inspection before applying further external finishes. please note that the further external finishes work will start only after approval of the prepared surface from the ge as well as to the engineer-in-charge through site order. 54 preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 12 sq.m/litre/2 coats by using spray gun to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. 55 preparation of surfaces and applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats by by using spray gun to ceiling surfaces over & including a coat of interior primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. 56 preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade)@ 5 sq.m/litre/2 coats by using spray gun to external walls/rcc surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. 57 preparation of new/existing plastered surfaces as in ceilings and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. this shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. about 1.3 kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by engineer-in-charge. 58 preparation of new/existing plastered surfaces as in walls and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. this shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. about 1.3 kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by engineer-in-charge. 59 m & l providing two coats of synthetic enamel paint over new steel surfaces and a coat of red oxide primer onincluding preparation of surface of any description not exceeding 10 cm width or girth complete all as specified and directed by engineer -in -charge. 60 m & l providing two coats of synthetic enamel paint over new wooden surface including preparation of surface withprimer all as specified. 61 m&l for preperationof old steel surface and applying two coat of synthetic enamel paint complete all as specified and directed by engineer -in -charge. 62 m&l for preperationof old wooden surface and applying two coat of synthetic enamel paintcomplete all as specified and directed by engineer -in -charge. 63 m&l for shotcreting 25mm thick in rcc columns, beams and slabs etc in layers with approved design mix (minimum cement content of 350 kg/cum on m-25) concrete having the specified minimum characterristic compressive strength (with ordinary protland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria) including the cost of centering and shuttering at edges and corners etc as directed by engineer-in-charge including chipping of unsound /weak concrete material 25 mmaverage thickness from slabs,beams, columns etc with manual chisel and /or by standred power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes and thoroughly washing with water and allowing it to dry etc. including removal of rust by applying approved rust removal chemical & the coating with dr fixit epoxy zinc primer or equivalent @ 6sqm/ltr at dft of 100microns as per specifications and disposal of debries for all lead and lifts all complete as per direction of engineer-in-charge. 64 m&l hard drawn steel wire fabric not exc 4kg/sqm cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemntall as specified & directed by engineer-in-charge. 65 m & l 5mm thick rendering in cement mortar 1:3 on fair facesof brick work or concrete surfaces of ceiling finished even and smooth without using extra cementcomplete all as specified and directed by engineer - in - charge . 66 dismantling structural steel work including doors,gates but excluding framed truss etc. 67 s & f framed work such as grills,cooler stand ,ladder grating and sun shed etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work or water tanks and similar work conforming tofe 410-0 or fe 310-0 all as specified . 68 dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) and rubbish off the permices. 69 s&f glazed ceramic colouredtiles joint free 350x250x7mm/450x350x7mm square or rectanguleras on walls etc set and jointed in neat cement slurry and pointed in whiteor coloured cement to match over and including 10mm thick rendering in cm 1:4 complete all as specified and directed by engr-in-charge. 70 m&l non skid ceramic coloured /printed tiles 7 to 8 mm thick( square / rectangular) area of each tile exc. 0.11 sqm but n. exc, 0.18 sqm in floor and shall be jointed in neat cement slurry and pointed in paste pigmented to tile shadeover and incl 15 mm thick screed bed in cm 1:6 complete all as specified and directed by engr-in-charge. 71 m&l cement concrete type b-0, 1:2:4 using 12.5 mm graded stone aggregate as in floors 25 mm thick for tilesall as specified.& directed by engr -in-charge.. 72 m&l 16-18 mm thick granite (of any type ) work (table rubbed and polished ) in cooking platform and likein cm (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding/moulding of edges. 73 demolitionof cement concrete ( un re-inforced) of any description in ground floor and pavings exc15 cm thickness (below or above gl). 74 material and labour for water proofing treatment to rcc sunken slab and adjoining vertical slab as described following any one method complete as per directions of ge. 75 method 1(a) supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, smart care damp proof 2k, having 100% elongation as per astm d412, resisting 5 bars hydrostatic pressure as per din 1048, reduction to rapid chloride shall be 70 as per din 1048, crack bridging upto 1.2mm as per astm 4548.5 clean all working surface & made free from dirt, grease laitance etc. after inspection for all working area rough surface, cracks & from dirt, grease laitance etc. after inspection for all working area rough surface, cracks & construction joint are treated by polymer modified mortar of 1:1:4 (1 cement : 1polymer : 4 sand). making gola of size 75x75mm at junction of vertical & horizontal with the polymer modified mortar of 1:1:4 (1 cement : 1 polymer : 4 sand). the coating shall be terminated at 1600mm in toilet/2100mm in bathroom on vertical walls. the mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing and shall have consumption of 1.5kg/sqm per coats, etc, complete as per manufactures specifications.(b) bore packing: all the borehole gaps between concrete surface and pvc pipe of various dia upto the neck level shall be filled with non-shrink free flow grout – smart care gp grout having dual shrinkage compensation property. before the bore packing, surface of the pvc pie and concrete surface will be made rough and sand will be sprinkled with polymer bonding agent. (c) apply12-15mm plaster on slab and vertical surface admixed with smart care vitalia neo @200ml per bag of cement before treatment. 76 method 2(a) supplying and applying two component cementitious & acrylic flexible water proofing & protective coating, two coats with 1mm dft, having hydrostatic (positive) water pressure resistance (din 1048) is 7. abrasion resistance, cm/km is 0.09 of dr fixit pidifin 2k @ 1.5kg/sqm with a paint brush over existing slab surface and adjoining vertical surface. the polyester reinforced coated netof 45g/sqm, 2.5mmx2.5mm is laying on the surface immediately on the first coat of two component modified polymer dr fixit pidifin 2k. after removal of all lose materials like dust etc. with wire brush coir brushes from surface to get absolutely cleaned surface free of foreign contaminant filling of crack and patches with polymer based mortar/micro concrete, after that making the gola onsurrounding wall’s junction and seal the vertical walls. in case of core cutting on the surface, the joint is seal with non-shrink grout.(b) the coating shall be terminated at 1600mm in toilet/2100mm in bathroom on vertical walls.(c) apply12-15mm water proof plaster on slab and vertical surface admixed with dr fixit pidiproof 77 m & l pcc (1:5:10)using 40mm graded burnt bricksaggregate as in foundation filling & mass concrete or as in sunkenfloor complete all as specified & directed by engineer-in-charge 78 dismantling water tanks and removing to store ofexc 500 and nexc 1000 ltr capacity 79 s & f rotational moulded polythene three layered white coloured water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in ssr part i of capacity 1000 litres all as specified and directed by engineer - in - charge . 80 s&f in repair 20mm ball brass valves, high pressure, with polytheene float and flynut complete, screwed for iron pipe orr brass ferrule and fixed. 81 s & f in 20mm bore gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed all as specified . 82 s & f in 25 mm bore gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed all as specified . 83 s & f in repairs pvc 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve, float and handle including brackets, flush pipe of pvc 32mm bore and connection to wc pan complete all as specified. 84 s&f in repair viterous china squating pan orrisa pattern size 580/440mm wash down water closet pan ,white (excluding fixing bolts, flushing cistern and flush pipe) with plastic seat cover. 85 s&f in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including connection to drain (or outgoing pipe) and to flushing pipe ,anti-syphonage pipe and white closed patern with flat bottom & mild steel cromium plated or aluminium hinging device plasticseat cover complete . 86 s&f repairs vitreous china half stall urinals flat back white minimum with grating and union for discharge pipe ,providing & fixing plugs, bedding urinal against wall in cm 1:2 , securing urinal to plugs with & incl 60mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cistern with nbrackets, flush pipe, grating and union for discharge pipe complete all as specified. 87 s & f in repairs vitrous china oval wash hand basin white of size 550x400 mm including brackets 300mm long pvc connection with brass nuts, 40mm dia waste coupling including cutting for and pinning in end of brackets or erecting stand etccoloured top bowl type screwed shank fly nut flange end including cutting for and pinning in granite slab of hole including 32 mm dia chromium plated waste coupling and bottle trap all as specified. 88 s&f in repair 600mm x 450mm beveled edge mirror of selected quality glass on 6mm thick commercial plywood and fixed wooden plugs with chromium plated brass screw and cup washes fixed in repair. 89 s & f repairs 15 mm bore concealed stop cock cast copper alloy screwed down high pressurewith crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed but fancy type chromium plated with long shank and cup (concealled type) 90 s & f in repairs 15mm bore angle cock one waychromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified . 91 s & f in repairs 15 mm bore bib tap fancy type chromium plated with crutch or butterfly handle screwed down ,screwed for iron pipe all as specified. 92 s&f in repairs pillar taps 15mm borefancy type chromium plated cast copper alloywith capstan heads scre-wed down high pressure with or without lettered hot orcold with long screwed shanks and fly nuts screwed for iron pipe . isi marked 93 s&f in repair brass chromium plated central hole basin mixer with regular spout,popup waste system and 450mm long braided hoses with connection and nuts complete all as specified and directed by engr-in-charge. 94 s&fin repair brass chromium plated shower rose 125mm size with swivel joints,any size, incl shower arm fixing to pipe or union complete all as specified and directed by engr-in-charge. 95 s&f in repair pvc connection both side brass unions internal for size 15mm dia and 450mm long all as specified and directed by engineer-in-charge. 96 s&f ewc jet spray complete all as specified and directed. 97 s & f in repairsoap dish approximately size 160 x160x 90 mm and fixed withas chromium plated brass screws complete all as specified and directed by engineer -in -charge. 98 s&f peg set of stainless steel solid body of 125mm to 175 mm having 6 nos hooks fixed with brass chromium plated screws complete in all as specified 99 taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed by engr-in-charge. 100 fixing only mild steel tubes of size 15mm bore (medium grade) galvanised with all fittingsand fixed complete to wallall as specified & directed by engineer-in-charge. 101 supply & fixing mild steel tubes of size 15mm bore (medium grade) galvanised with all fittings and fixed complete to wallall as specified & directed by engineer-in-charge. 102 taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store omplete all as specified and directed by engineer -in -charge. 103 supply & fixing of 16mm outer dia cpvc pipes sdr 11 including all fittings plain/brass threaded cpvc sdr 11 fittings (like elbow, tee, socket, reducer, union, bushing, step over bends, end cap, end plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including cpvc solvent cement for jointing omplete all as specified and directed by engineer -in -charge. 104 supply & fixing of 20mm outer dia cpvc pipes sdr 11 including all fittings plain/brass threaded cpvc sdr 11 fittings (like elbow, tee, socket, reducer, union, bushing, step over bends, end cap, end plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including cpvc solvent cement for jointing omplete all as specified and directed by engineer -in -charge. note :-(i) pipes inside the buildings shall be fixed concealed and outside the buildings shall be fixed on the surface along wall with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall ) of suitable size fixed with fasteners/nut bolts, as directed by engineer-in-charge.(ii)bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steel material with hot dip zinc aluminium flake coated and fixed all as shown on btd drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account. 105 supply & fixing of 25mm outer dia cpvc pipes sdr 11 including all fittings plain/brass threaded cpvc sdr 11 fittings (like elbow, tee, socket, reducer, union, bushing, step over bends, end cap, end plugs, one side brass/two side brass etc) fixed along walls, ceiling or laying under floors etc and including cpvc solvent cement for jointing complete all as specified and as directed.note :- (i) pipes inside the buildings shall be fixed concealed and outside thebuildings shall be fixed on the surface along wall with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall ) of suitable size fixed with fasteners/nut bolts, as directed by engineer-in-charge.(ii) bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steel material with hot dip zinc aluminium flake coated and fixed all as shown on btd drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account. 106 taking up or down steel tubing of 25 to 32 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed by engr-in-charge. 107 s & f 40mm bore medium grade tube galvanised with all fittings and fixed complete concealed including groove cutting for concealing to walls & ceiling or laid in floor complete all as specified and directed by engineer - in - charge. 108 dismantling of cast iron pipes jointed in cement mortar and taking out from trenches walls etc upto 100 mm bore all as specified and directed by engr-in-charge . 109 supply & fixing 110mm bore upvc pipes grade b single socketed in any length with rubber ring joints, laid in trenches, joints fixed with pipe joint lubricant c complete all as specified and directed by engr-in-charge. 110 supply & fixing 75mm bore upvc pipes grade b single socketed in any length with rubber ring joints, laid in trenches, joints fixed with pipe joint lubricant complete all as specified and directed by engr-in-charge. 111 supply & fixing upvc junction (double t/socket) grade b equal or unequal suitable for 110mm bore pipe complete all as specified and complete all as specified and directed by engr-in-charge. 112 all as per item no 109 above 113 supply & fixing upvc bends (any radius) grade b suitable for 110mm bore pipe complete all as specified and directed by engr-in-charge. 114 all as per item no 111 above 115 supply & fixing upvc vent cowl grade b suitable for 110mm bore pipe complete all as specified and directed by engr-in-charge. 116 supply & fixing pvc vent cowl grade b suitable for 75 mm bore pipe complete all as specified and directed by engr-in-charge. 117 supply & fixing upvc grade b multi floor trap 110 mm bore and 600mm long with grating including jointing with with pipe joint lubricant complete all as specified and directed by engr-in-charge. 118 supply & fixing upvc grade b multi floor trap 75 mm bore and 600mm long with grating including jointing with with pipe joint lubricant complete all as specified and directed by engr-in-charge. 119 demolition of brick work built in cement mortar including all quoins, arches, pillars etc . 120 m&l for brick work with subclass‘b’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by engineer-in-charge. 121 labour only forbrick work built in cm (1:6) with subclass b bricks, straight or curved on plan exceeding 6m mean radiuswith reusing the old bricks obtained fromitem no 118 . 122 m&l for taking down carefully point wiring complete including fixture and fittings from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc and making good to disturbed area all as specified 123 m&l for point wiring complete with isi marked 1.5 sqmm single core pvc insulated unsheathed cable 1100v grade frls with multistranded copper conductor drawn through concealed in wall/ceiling surface and its accessories includingpvc rigid concealed conduit heavy duty suitable size with all accessories such as bend, reducers, ms hooks, ms junction boxes, 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of switchs, sockets, fan regulator etc covered with 3 mm thick plastic laminated hylem top cover sheet of required color fixed with brass screws and cup washers painting terminal boxes inside and outside with one coat red oxide primer includingfixing and 1.5 sqmm copper conductor as earth continuity to connect common earth dolly completed for the following all as specified 124 (a)one light point/fan point/exhaust controlled byone way switch 125 (b)one light point controlled by one two way switch 126 (c)one 5 pin socket out let 5 amps on the same board with other switches 127 (d)one 5 pin, 5a switch socket outlet point on independent board with other switches. 128 all as per item no. 02 here-in-before but with 2.5 sqmm cable for 1no 16 amps socket outlet point on independent board including 2.5 sqmm pvc insulated unsheathed cable multistranded with copper conductor green in colour as earth continuity conductor all as specified 129 s&f piano type switch single pole 1 way 5/6 amps 230 volt ac supply complete all as specified and directed by engr-in-charge. 130 s&f socket two in one 6/5 pin 5 amps230 volt ac supply complete all as specified and directed by engr-in-charge. 131 s&f piano type switch single pole 1 way 15/16 amps 230 volt ac supply complete all as specified and directed by engr-in-charge. 132 s&f piano flush type switch single pole 2 way 15 amps 230 volt ac supply complete all as specified and directed by engr-in-charge. 133 s&f socket two in one 6/5 pin 15/16 amps230 volt ac supply complete all as specified and directed by engr-in-charge. 134 s&f ceiling rose surface type, 65mm x 50mm three terminals, 3 phase / pvc / polycarbonate isolated body complete all as specified and directed by engr-in-charge. 135 s & f stepped type electronic fan regulator flush type on the existingphenolic laminated sheet etc. as reqd complete all as pecified and directed. 136 s&f lamp holder, pvc/polycarbonate type with back plate suitable for batten fittings with led bulb 09 watt complete all as specified 137 supply and fixing led lights fitting 20 w, 220v, ac decorative box type with driver, holder including led tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 138 supply and fixing led light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 v ac decorative type with driver holder and led lamp including connecting up with three core flexible copper conductor cable of suitable size complete. 139 supply and fixing led street light fitting 35 watt 230 v ac outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 65/66 protection complete. 140 s&f single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole mcb 20 amps capacity complete all as specified and directed by engr-in-charge. 141 s&f sheet metal enclosure for vtpn dbs 415 volts 08 way with 200 amps rated bus bar neautral link, earth bar double door with mccb as incomer complete all as specified 142 s&f sheet metal enclosure for vtpn dbs 415 volts 04 way with 200 amps rated bus bar neautral link, earth bar double door with mcb tpn as incomer complete all as specified and directed by engr-in-charge. 143 s&f sheet metal enclosure for dbs spn 230 volts 12 way with 200 amps rated bus bar neautral link, earth bar double door complete all as specified and directed by engr-in-charge. 144 supply and fixing 415v 16 ka 415 volts mccb of cap 100 amps following poles and current carrying capacity in the db complete with connection testing and commissioning. 145 supply and fixing 415v 10ka b curve miniature circuit breaker (mcb) tpn/4p of capacity 40 to 100 amps poles and current carrying capacity in the db complete with connection testing and commissioning. 146 supply and fixing 240v, 10 ka b curve miniature circuit breaker (mcb) of single poles and current carrying capacity 6 to 32 amp, in the mcb db complete with connection testing and commissioning complete all as specified and directed by engr-in-charge. 147 supply and fixing amp rating 240v, 10ka c curve miniature circuit breaker (mcb) of spn 40 to 63 amp and current carrying capacity in the mcb db complete with connection testing and commissioning complete all as specified 148 m&l forsubmain wiring comprising single core , 2 runs of 2.5 sqmm nominal cross sectional areamulti stranded copper conductor cable, pvc insulated unsheathed 1100 volts gradedrawing in and including appropriate dia. in surface/recessed pvc conduit and its fittings completeincluding provision of 1x2.5 sqmm nominal cross sectional areamulti stranded copper conductor cable, pvc insulated unsheathed 1100 volts grade as earthwire and using color code as per is and specified and making good all disturbed work to match the existing complete incl taking down old unsv sub main complete all as specified and directed by engr-in-charge. note :- (i)extra length of cables/ wire required for connection to mcbs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly.(ii) two run of wire, one run of earth wire and conduct shall be measured as one unit. 149 all as per item no 142 abovebut for single core , 2 runs of 4.0 sqmm nominal cross sectional area including provision of 1x4.0 sqmm nominal cross sectional area complete all as specified and directed by engr-in-charge. 150 all as per item no 142 above but for single core , 2 runs of 6.0 sqmm nominal cross sectional area including provision of 1x 6.0 sqmm nominal cross sectional area complete all as specified and directed by engr-in-charge. 151 m&l for earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 m below normal gl connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washersand earth strip protected by 15 mm dia gi pipe medium grade and connected to main distribution board panel/earthing test point all as shown on electrical plate no.3 of ssr part i and all as specified including testing on completionincluding taking down old unserviceable earthing any type complete all as specified and directed by engr-in-charge. note :-gi wire 4mm dia including test point terminal box include in the quoted rate.

Boards / Undertakings / PSU

TRN :49067628 | 30 May, 2025

Tender Value : 0

Dhanbad - Jharkhand

Tender for purchase of miscellaneous items list attached , laying and jointing pvc pipe. heading , abir /kg (best quality) , alluminiun utensils in kg. (best quality) , baby receiving tray 18”x12” – steel / pc (standard quality) , battery big no. 1050 leak proof / pc (everyday/ nippo/duracell) , battery medium 1035 leak proof/ pc (everyday/ nippo/duracell) , battery small 1015 leak proof / pc (everyday/ nippo/duracell) , battery small 1012 r03 (aaa) leak proof / pc (everyday/ nippo/duracell) , biodegradable bags for120 ltr. bins (pack of 100 pcs) – different colour. / pkt. (standard quality) , biodegradable bags for70 ltr. bins (pack of 100 pcs) – different colour. / pkt. (standard quality) , biodegradable bags for 60 ltr.bins (pack of 100 pcs) – different colour. / pkt. (standard quality) , blade shaving/ pkt of 05 pc. (willkingson /topaz/7o’clock) , bleaching powder / 25kg bag. isi marka , candle 200 gm (6 pc. packet) (standard quality) , coloured paper thin / zista (standard quality) , cup plate set bone china / set of 06 , detecto wall mounted / ft (standard quality) , display white board / sft. (standard quality) , display bord digital electric running/sft , door closer automatic standard– godrej / dorset/ pc , door matt 36”x18”coir / pc (standard quality) , door matt 36”x18”pvc grass type / pc (standard quality) , door matt 36”x18”rubber / pc (standard quality) , door matt 4’x2’ coir/ pc (standard quality) , door matt 4’x2’ pvc grass type (standard quality) , door matt 4’x2’ rubber / pc (standard quality) , four bins set 60 ltr.- different colour with trolley / set (standard quality) , french chalk / pkt. of 400gms (isi marka) , glass (water) set / set of 06 pc. (brocil/trew/xera) , hammer/pc (standard quality) , hawai chappal p.vc. front cut/ pair (standard quality)- rubber sole , hawai chappel different size / pair (relaxo/lakhni/bata/ajanta) - rubber sole , hight scale big size/pc. (standard quality) , hindalium utensil / kg (standard quality) , induction kettle for warm water and tea – 2 ltr. / pc. (standard quality) , induction suspen with cover – 2 ltr. capacity (standard quality) , iron utensils in kg. (standard quality) , g.i. box 60”30”30” 26g per pcs. , lifebouy soap 125gm / pc , liquid handwash 200 ml. (detol/lifeboy/savlon) , lock 50 mm / pc (linkatoot/link round , lock 65 mm/ pc (linkatoot/ link round , match box / pkt of 10 pcs. (home light/ aim) , measuring cup steel 200ml / pc (standard quality) , measuring cup steel 250 ml / pc (standard quality) , measuring cup steel 400ml / pc (standard quality) , mechanical height rod / ft (standard mark) , mixer grinder heavy duty 700 wt./ pc (bajaj/ havels/sumeet) , mosquito coil / pkt.(good night/maxo/mortein) , mosquito repellent machine / pc. – (good night, maxo, mortien, allout) , naphtahline ball / 100 gm pkt. (bengal chemical) , needle cum syringe destroyer 3 ltr./ pc. , nil blue / 900 gms pkt. (robin) , oxygen key / pc. , p.v.c. dustbin25 ltrs. in different colour / pc , plastic stool , donor questionnaire and consent form (new format double page double side printed , plastic chair witharm , plastic chair withoutarm , p.v.c. plastic water drum 100ltr. capacity with cover / pc.- cello, milton , p.v.c. plastic water drum 50ltr. capacity with cover / pc.- cello, milton , plastic bucket 20 ltr. capacity(cello, milton) / pc. , plastic dustbin with cover 60 ltrs./ pc- cello, milton , plastic mug – standard size 1000ml (cello, milton) / pc. , plastic tub 20” diameter best quality (cello, milton) / pc. , plastic waste bins 120 ltr. – different colour / pc. (neelkamal/ supreme ) , pressure cooker 10 ltr. – united, hawkins , prestige / pc , pressure cooker 5 ltr. – united, hawkins, prestige / pc , refill liquid for mosquito repellant / pc- good night, maxo, mortien, allout , rice keeping box – g.i. sheets 24g , 35”x20”x12” with cover / pc. (standard quality) , rice keeping box steel - 26g , 35”x20”x12” with cover / pc. (standard quality) , salai wrench for opening oxygen cylinder 10 inch / pc. (taparia ) , shoe boots different size/pc.(standard make) , shoe plastic/pc. , shoe rack steel big size/pc three self/pvc size- 36”x36”x15” , soda tata / 50 kg. bag (tata) , steel utensils / kg. (standard quality) , sutri / kg. (standard quality) , tea container – 10 ltr.capacity / pc. (maharaja/anapurna) , tools kit (speners, screw drivers set, slyrinch, pliers set + electric tester) / set (toparia) , torch 3 cell bras body (l.e.d.) / pc. (eveready/nippo) , urinal male /female / - steel /pc.- (standard make) adult , vimpowder 1000 gm for washing utensil / kg , wall mounting measuring scale / pc (standard make) , washing powder best quality 1000gm / kg. (ghari/panki/wheel active) , whiting / kg. (standard quality) , antivirus total security compatible for win7, win 8, win 10 with installation. quick heal, bit defender, kaspersky , aphaeresis consent from , aphaeresis register , arch file / pc , attendance register- 24 page per pc (bhakka) , blank c.d per pc (sony) , cartidges for toshiba e-studio 3518 a per pc , cartidges for workcentre pe 220 per pc , cartidges for xerox phaser 3260 , cartidges for xerox phaser 3020 , cartidges h.p 88a per pc (h.p) , cartidges h.p. 12a per pc (h.p) , cartidges toshiba 457per pc , cartidges for xerox versa link b 7035 per pc , cartidges h.p. laser mfp 1200 a per pc (h.p) , cartidges h.p. laser 108 a per pc (h.p) , cartidgesnpg- 76 black canon xerox machine. , cartidgeslaser shot lbp 2900b , cartidges pantum m660n , toner for work centre xerox machine model 415 per pc , toner for work centre xerox workcentre 5020 per pc , drum cartidges of xerox machine , drum of xerox machine with blade , clip file pvc per pc (standard quality) , cover file folding per pc (standard quality) , carbon paper –koresblue/ black , rubber stamp different size per pcs. , marking ink 30ml per pcs. , diet calculation register – 400pages. (standard quality) , dot pen cello griper per pc. (cello/ montex) , envelopbest quality 16”x12” per pc (best paper) , envelopbest quality brown paper 10”x4 ” per pc (best paper) , envelopbest quality brown paper with inside laminated 10”x4” per pc (best paper) , envelop best quality 11”x5 ½” per pc (best paper) , envelop coated with cloth 10”x12” per pc. (best paper) , envelop coated with cloth 12”x15” per pc (best paper) , file guard + file folding withprinted hospital name & monogram on cover long thread (best paper) , flat file standard size per pc. (best paper) , fly leaf cloth binding with monogram – as per our sample per pc. (best paper) , guard file 100 stick per pc. (best paper) , gum700 ml per bottle (camel) , marker pen – different color per pc. , office – t.pin per pkt , online ups- 4 kva2 hour backupwith complete installation – exide, microtech, sukam , online ups with inductive load with ½ hour battery backup.- exide, microtech, sukam , p.v.c. cover file bag per pc (best quality) , paper weight standard per pc. , pen drive for computer – 32 gb per pc. (h.p/sony/sandisk) , pen for white board per pc , pen whitener eraser per pc , pin- bell per pkt. (bell/ kisan) , plastic scale 12” , steel scale 12” , registerleather bond printed hospital name & monogram on cover & 1st page with numbering -06 no. per pc(as per our sample) , registerleather bond printed hospital name & monogram on cover & 1st page with numbering -08 no. per pc (as per our sample) , registerleather bond printed hospital name & monogram on cover & 1st page with numbering -12 no. per pc (as per our sample) , registerleather bond printed hospital name & monogram on cover & 1st page with numbering -20 no. per pc (as per our sample) , registerleather bond printed hospital name & monogram on cover & 1st page with numbering -30 no. per pc (as per our sample) , register component preparation 20 no.(as per our sample) , register component storage 20 no.(as per our sample) , register binding , patient’s cross matching register 20 no. , thalassemia pts. register 20 no. , donor defferal register 20 no. , whole blood stock register 20 no. , blood donor register 20 no. , patient’s grouping register 20 no. , donor gruping register 20 no. , master record register wb 20 no. , blood component stock register 20 no. , tti record register 20 no. , issue record register 20 no. , blood component discard register 20 no. , donor consent form both side printing 100 pcs per book , human whole blood/blood component single side printing book of 100 pcs. , color plastic coated labal crad with adhesive paper size 4”x3”per 100 pcs. , humen whole blood ip 4”x3” (group ayellow/group b pink/ group o blue/ group ab white) per 100 pcs , packed red blood cell concentrated ip 4”x3” (group ayellow/group b pink/ group o blue/ group ab white) per 100 pcs , random donor platelet concentrated ip 4”x3” (group ayellow/group b pink/ group o blue/ group ab white) per 100 pcs , fresh frozenplasma ip 4”x3” (group ayellow/group b pink/ group o blue/ group ab white) per 100 pcs , goods weight machine digital 50gm to 150 kg avove with stand havy duty- brand make per pcs. , stamp ink best quality 700ml per bottle , stamp pad self inking big per pc , stamp pad self inking medium per pc , stamp pad self inking small per pc , staplerbig24/10 per pc (kangaroo) , staplerbig24/6 per pc (kangaroo). , staplerbig24/8 per pc (kangaroo) , stapler pin big24/10 per pkt (kangaroo) , stapler pin big24/6 per pkt (kangaroo) , stapler pin big24/8 per pkt (kangaroo) , tag best quality per bundle , tape cutter per pc machine , white paper d.f.s. best quality per rim(500 sheets) (hanuman/ agro) , white paper s.f.s. best quality per rim (500 sheets)(hanuman /agro) , xerox paper white – a3 75 gsm per pkt (500 sheets) (century star/j.k) , xerox paper white – a4 75 gsm per pkt (500 sheets) (centurystar/j.k.) , xerox paper white – u-1 75 gsm per pkt (500 sheets) (century star/ j.k.) , anaesthetics note form single side printing century white paper– 11 ½” x 8” (book of 100 pc) (century 75gsm) , application cum consent form for sterilization operation book of 2 pages both side b/w (century 75gsm) , bed head ticket form double page both side printing- century white paper – size a3 (book of 100 pcs) (century 75gsm) , blood doner card for blood bank size – 5”x4” (100 pcs) (century 75gsm) , blood doner certificate card – multicolour printing for blood bank size 6”x6” plastic coated paper (100 pcs) (century 75gsm) , blood donor card with printing, best quality paper size 4”x6”(100 pcs) (century 75gsm) , blood donor questionnaire and consent form both side printing for blood bank- size 11 ½” x 8”. (book of 100 pc)(century 75gsm) , blood grouping label card group a, b, o,ab – size 5”x4”with adhesive sticker paper colour (100 pcs) (century 75gsm) , blood report form for blood bank 13”x8” .(book of 100 pcs) (century 75gsm) , born certificate form century white paper size 210mm x 297mm / (book of 100 pcs) (century 75gsm) , client dose sheets (o.s.t.) - century white paper size 210mm x 297mm / (book of 100 pcs) (century 75gsm) , colour paper for blood bag 6”x6” (100 pcs) (century 75gsm) , cross match receipt book with duplicate copy for blood bank (100 original + 100 duplicate) per book (century 75gsm) , death certificate form century white paper size 210mm x 297mm / (book of 100 pcs) (century 75gsm) , department of pathology , obs.& gynae (bedside) – report form size a4 (book of 100pcs) (century 75gsm) , diet chart form a4. (book of 100 pc) (century 75gsm) , discharge ticket in best paper a4 general. (book of 100 pcs) (century 75gsm) , e.o.p.d. slip form century white paper 210mm x 297mm. (book of 100 pc) (century 75gsm) , flex banner multicolor with iron frame per sft.- with fitting (standard make) , flex banner multicolor without iron frame per sft.- with fitting (standard make) , for maternity facility case sheet of multiple coloured book of 11 pages both side as per sample/book (century 75gsm) , haemodialysisbook for patient plastic coated front & back page with 12 page 134mmx210mm (per book) (century 75gsm) , indoor continuation sheets form single side printing century white paper – 11 ½” x 8” (book of 100 pc) (century 75gsm) , injury report form best paper size 12”x7” with triplicate copy printing and winding and triplicate numberingfor surgery (book of 50 pcs) (century 75gsm) , investigation report form century white paper 210mm x 297mm. (book of 100 pc) (century 75gsm) , investigation report form for pathology both side printing – 11 ½” x 8” (book of 100 pc) (century 75gsm) , labor room register book of 100 pages as per sample/book (standard size & make) , medical record & check list for female /male sterilization book of 3 pages both side b/w (century 75gsm) , medico legal form single side printing century white paper for pathology& others departments11 ½”x 8” (book of 100 pc) (century 75gsm) , money receipt book of radiology, pathology, medicine,blood bank, office & others department(100 original + 100 duplicate) (century 75gsm) , monthly diet calculation register chart kitchen (book of 100 pcs) (century 75gsm) , name plate rewriting with materials per inch. stand with fitting (standard quality) , number writing of bed/roomper pcround/sq (standard quality & size 6”) , p.v.c. folder files inside pocket & clip with printing & monogram (per pc) (standard quality) , partograph chart form century white paper size 210mm x 297mm / (book of 100 pcs) (century 75gsm) , patient satisfaction survey-laqshya book of 100 pages b/w (century 75gsm) , pre-anaesthetic record form both side printing on yellow paper (book of 100 pc) (century 75gsm) , radiology report form century white paper 210mm x 297mm. (book of 100 pc) (century 75gsm) , blood requisition form for whole human blood i.p. single side printing- 11 ½ ”x8” for blood bank. (book of 100 pc) (century 75gsm) , risk bond form both side printing – century white paper – 11 ½” x 8” (book of 100 pc) (century 75gsm) , a4 size paper single side printing with paper , a4 size paper both side printing with paper , sign board painting & rewriting with material,iron & wood per sft. (standard quality & paints) , sncu bht format – set of 19 page (per set) black & white (century 75gsm) , sncu bht format colour with pocket plastic coated paper – set of 9 page (per set) (century 75gsm) , stock ledger for store printing & binding as per sample 450 page per pc.(as per our sample) , treatment chart form both side printing century white paper – 11 ½” x 8” (book of 100 pc) (century 75gsm) , wall painting and writing with materials per sft. (standard quality & paints) , wall painting with materials per sft. (standard quality & paints) , x-ray film envelops printed best paper -10 ½”x8 ½” (per 100pc) (standard quality) , x-ray film envelops printed best paper -9”x7” (per 100pc) (standard quality) , x-ray film envelops printed best paper - 12 ½”x10 ½” (per 100pc) (standard quality) , x-ray film envelops printed best paper - 12 ½”x12 ½” (per 100pc) (standard quality) , x-ray film envelops printed best paper - 15 ½”x12 ½”. (per 100pc) (standard quality) , bed sheet 100”x60” exclusive cotton / pc (best quality) , bed sheet 108”x76” exclusive cotton / pc (best quality) , blanket red (weight 2 kg) / pc (best quality) , door for curtain synthetic/cotton printed best quality 48” / 6’x4’ stitching +ring +complete fitting(best quality) , door curtain fancy double layer with stitching +ring +complete fitting– per/ pc. (best quality) , donor questionnaire and consent form (new format double page double side printed , cotton clothes green cashment (dosuti) 46” permtr. (best quality) , markin cloth 48 / permtr. (best quality) , mosquito net cotton full bed size 7’x5’x3’ / pc (best quality) , pillow cover 17”x26” excl. cotton c flap / pc (best quality) , pillow with rubber foam standard size 16”x24” / pc (best quality) , tericot cloth- white / per mtr (best quality) , towel big size 29”x 58” / pc (best quality) , towel hand 15”x25” / pc (best quality) , eye towel green cloth material reusable - per/pc. , leggins reusable green cloth material standard size – per/pc. , surgeon cap reusable green cloth material– per/pc. , waste lillen bag standard size – per/pc. , connection pipe for wash besin /pc (standard make & quality) , drain pipe for wash basin/pc (standard make & quality) , plastic angle cock for bathroom /pc (standard make & quality) , plastic bib/piller cock for bathroom /pc (standard make & quality) , supply & fixing of overhead water tank capacity 2000 ltr. & making a platform with masonry enclosures / pc. , supply fixing & connection of necessary water pipe line including all required accessories size ½” -p/feet, , supply fixing & connection of necessarycpvc water pipe line including all required accessories size ¾ ” -p/feet, , supply fixing & connection of necessarycpvc water pipe line including all required accessories size 1 ¼ ” -p/feet, , supply fixing & connection of necessarycpvc water pipe line including all required accessories size 1 ½” -p/feet, , supply fixing & connection of necessary water pipe line including all required accessories size 1 -p/feet, , supply fixing & connection of necessary water pipe line including all required accessories size 2 -p/feet, , supply fixing & connection of c.p. bib cock/c.p angle cockfor bathroom , supply fixing & connection of doctor c.p. bib cock/c.p angle cockfor bathroom , supply fixing & connection of halfa set , supply fixing & connection of fta/mta size ½” , supply fixing & connection of fta/mta size 1” , supply fixing & connection of fta/mta size1 ½” , supply fixing and connecting of valve – ½” complete set , supply fixing and connecting of valve – ¾” complete set , supply fixing and connecting of valve – 1” complete set , supply fixing and connecting of valve – 2” complete set , supply fixing and connecting of valve – 3” complete set , supply fixing and connecting of valve – 4” complete set , supply fixing installation & connection of wash basine / pc. , supply, fixing & connection of cistern for bathroom / pc. , frame work of anodized material per sqft. , bookcase four door book case,rigid knock down construction, prime quality crca steel – panels & frame. . each door is provided with transparent glass for clear inside vision secured in a metal frame through rubber gasket inside the top of respective compartment & ensures parallel and smooth movement. each door has a scissor mechanism for receding inside the tip of respective compartments. each door has plastic side end caps as handle which is easy to grip epoxy polyester powder coated.(catalogue must be attached with tender) (authorization required) , filling cabinet: four drawer filling cabinet – rigid knock down constructions easy to grip full length handle recess integrated into metal drawer having centralized locking and anti-tipping arrangement to ensure that when one drawer is opened for use, it does not allow other drawers to be opened. high quality precision ball slide.(catalogue must be attached with tender) (authorization required) , high back chair cushioned high back revolving chair, pu moulded cushion seat and back with arm .(catalogue must be attached) (authorization required) (durian/ dumro/ zuari/ neelkamal (authorization required) , high back executive chair: high back executive chair – torsion bar mechanism, single seat & back, high density foam. (catalogue must be attached with tender) (authorization required) (durian/ dumro/ zuari/ neelkamal (authorization required) , medium back chair cushioned medium back revolving chair, pu moulded cushion seat and back with arm.(catalogue must be attached with tender) (authorization required) (durian/ dumro/ zuari/ neelkamal (authorization required) , executive office table- size in mm :- 1800(w) x 900(d)x 750 (h) material ;- block board (19mm) |(make: green ply/century ply/kit ply), is 1659:2004 and termite proof, covered with wood finish laminate thickness i mm (is 2046), set of one side drawers with anti-rust telescopic slider and anti-rust monolithic handle, and central locking facility. other side should have the storage box with two self and have a door with anti-rust handle and lock. all edges to be surrounded by teak bead and polished. (durian/ dumro/ zuari/ neelkamal (authorization required) , office table office steel tablemade of pre-laminated particle board with one side drawer unit , size- 4’x2’ approx. (catalogue must be attached with tender) (authorization required) (durian/ dumro/ zuari/ neelkamal (authorization required) , executive table made of pre-laminated particle board with one side drawer unit , size- 5x3x2.5 approx. (catalogue must be attached with tender)(make- durian/ dumro/ zuari/ neelkamal (authorization required) , sofa set three setter (make- durian/dumro/zuari/ neelkamal) (authorization required) , sofa set single setter (make- durian/dumro/zuari/ neelkamal) (authorization required) , six setter dining table with chari (make- durian/ dumro/ zuari/ neelkamal) (authorization required) , center table (make- durian/ dumro/ zuari/ neelkamal) (authorization required) , coir mattress 6.5 feet. x 3feet. , steel plain almirah – steel almirah. size – 78”x34”x19”x22g with locking systems apoxy coated colour.(catalogue must be attached with tender) (authorization required) , steel rack steel rack of 6shelves, size –height 6’ and panelsize – 72”x36”18” , 4+2 base and head, adjustable with sloted angle.(catalogue must be attached with tender) (authorization required) , three seater chair –black chrome plated.(catalogue must be attached with tender) (authorization required) , three seater chair –silver: chrome plated base. (catalogue must be attached with tender) (authorization required) , training chairs withgood quality and finish : student chair, fixed back, hd foam; prelaminated particle writing board, round crc pipe (catalogue must be attached with tender) (authorization required) , visitors chair with handle: full arm visitors chair, fb/capsule pipe mechanism, pu moulded cushion seat and back, capsule pipe crc base. white terycot cloth full back cover. (catalogue must be attached with tender) (authorization required) , revoling bar stool long size , aluminium partition with acp sheets (standard quality & make) , aluminium partition with glass/particle/jali (standard quality & make) , aluminium sliding for window & doors / sq. ft. (standard quality & make) , bht frame – standard steel / pc (12”x 15” standard make & quality) , carpet material with laying labour charges/sqft. (p.v.c. 1.5 mm standard quality & make) , collapsible gate grill with fitting and fixing/ kg(standard quality) , goods carrying trolley/ pc (standard quality & make) , waste segregation trolley 15 ltrs. foot operated double bucket in different colour / pc , baby cradle m.s. 36”x15”x39” with mattress / pc (authorization required) , back rest / pc (authorization required) , basin stand steel / pc (authorization required) , bed pan – steel / pc (standard size & make) , bed side bowl – steel / pc(22 g 18” standard size & make) , wheel chair (authorization required) , bed side screen fourfold with curtains. (authorization required) , bed side locker (authorization required) , wash basin stand (single)(authorization required) , obstetrics delivery table (3 section) (authorization required) , emergency trolley (authorization required) , dispenser stand with foot pedal (operated by pressing the foot pedal) (authorization required) (22 g 18” standard size & make) , dressing drum seamless15”x12” / pc (authorization required) (22 g 18” standard size & make) , dressing drum seamless 11”x15 / pc (authorization required) (22 g 18” standard size & make) , dressing drum seamless 9”x9” / pc (authorization required) (22 g 18” standard size & make) , iron safety gril for all purpose per sft. , eclamptiabed / pc (authorization required)(22 g 18” standard size & make) , examination couch with three upper box, three sliding drawers ,sliding footstep,b.p. apparatus tray & mattress standard size / pc (authorization required) (22 g 18” standard size & make) , foot rest standard sizem.s. / pc. (authorization required) (22 g 18” standard size & make) , foot step standard double m.s. /pc (authorization required) (22 g 18” standard size & make) , gadda for labour table thickness 3” / pc. (neelkamal/ sleepwel, kaulon) , gynae examination couch. (authorization required) , high end fibrebed semifowler (abs pannel) with mattress , i.v. rodand over bed table 6” wheel with side railing/ pc. (authorization required) , high end fibrebed semifowler (abs pannel) with mattress , i.v. rod / pc (authorization required) , i.v. stand s.s. with plastic base / pc. (authorization required) , instrument tray ss6”x8” with cover / pc (authorization required) , instrument tray ss 10”x12” with cover / pc (authorization required) , instrument tray ss 8”x10”with cover / pc (authorization required) , kidney tray big size / pc. (authorization required) , kidney tray middium size / pc. (authorization required) , kidney tray small size / pc. (authorization required) , labour table s.s. telescopic hydraulic height adjustable with mattress / pc. (authorization required) , mattress high density foam (40 density) – 4” for semifowler bed / pc (neelkamal/ sleepwel) , oxygen cylinder stand cum trolley standard / pc. (authorization required) , p.v.c. dustbin trolley with two wheel standard size 120 ltr. branded in different colour / pc (authorization required) , patient stool m.s. powder coated / pc. (authorization required) , pediatric bed with four sides railing & mattress / pc. (authorization required) , revolving stool with s.s. top. / pc (authorization required) , stretcher trolley approx. dimension 2010mm 1 x570mm w x 810 mm. h trolley made of s.s. tubular frame mounted on 200 mm dia four swivels castors. heavy duty with side railing s.s. , o2 cylinder carriage with mattress. / pc. (authorization required) , trolley instrument s.s. / pc. (authorization required) , trolley instrument s.s./ pc.(authorization required) , trolley medicine s.s. / pc. (authorization required) , trolley waste lilen standard size / pc. (authorization required) , ultra low volume fogger – 4 ltr. – 25000 rpm / pc. (authorization required) , verical blind with fixtures & installation/sqft. (standard quality & make) , weighing machine –paediatrics / pc , weighing machine – adult / pc , x-ray view box led / pc , 1.5 ton inverter split ac copper condenserwith installation/ pc. ( with standard warranty ) (catalogue must be attached with tender) (authorization required) , 2 ton inverter split ac copper condenserwith installation/ pc. ( with standard warranty ) (catalogue must be attached with tender) (authorization required) , d s l r camera – 24 mega pixel or more with high speed usb minimum shutter speed 1/4000 per second storage types sd/sdhc8/sdxc8 memory cards./ pc( with standard warranty ) (catalogue must be attached with tender) (authorization required) , geyser – copper –25 ltr / pc( with standard warranty ) (catalogue must be attached with tender) (authorization required).- - havells, bajaj, voltas , geyser – copper – 15 ltr / pc ( with standard warranty ) (catalogue must be attached with tender) (authorization required) .- - havells, bajaj, voltas , inverter sinewave -1500 va/24 volt with double tubular battery 200 ah complete set–with installation & connection / pc. (authorization required).- microtech exide , led t.v. – 32 inch / pcbrand- sony, samsung, l.g.( with standard warranty ) (catalogue must be attached with tender) (authorization required) , photo copier machine – copy speed - 20 copy / min or above, display – 4line lcd display, warm up time approx 31 seconds or less, paper size – a3, a4, a5 (by-pass tray- a3,a4,a5,a6), memory – 256 mb ram, networking features – yes, resolution- 600dpi ( with standard warranty )/pc.(catalogue must be attached with tender) (authorization required) , photo copier machine – copy speed - 35 copy / min or above, display – 9” colour touch screen, warm up time approx 20 seconds or less, paper size – a3, a4, a5 (by-pass tray- a3,a4,a5,a6) memory –4 gb ram, networking features – yes, secure hdd – 320 gb, cpu – dual core ( with standard warranty ) / pc (catalogue must be attached with tender) (authorization required) , refrigerator – 175 ltr / pc( with standard warranty ) (catalogue must be attached with tender) (authorization required).- l.g. samsung, voltas , refrigerator – 220 ltr. / pc( with standard warranty ) (catalogue must be attached with tender) (authorization required). - l.g. samsung, voltas , refrigerator340 to 350 ltr. / pc( with standard warranty ) (catalogue must be attached with tender) (authorization required). - l.g. samsung, voltas , freezer500 ltr and above /pc (authorization required)- voltas , deep freezer 500 ltr / pc (authorization required) - voltas , supply & fixing of tubular battery for inverter -200 ah,- exide , ups set for computer2kva / pc.- microtech , ups set for computer 1kva / pc. -microtech , ups set for computer 650 va / pc.- microtech , fully automatic washing machine 6 kg –pc( with standard warranty ) (catalogue must be attached with tender) (authorization required) l.g., sumsang , water purifier (r.o.) – 50 lph, 7 stage of purification and water recovery more than 55%. the manufacturer company should have iso 9001 , 14001 certified and service centre in dhanbad ( with standard warranty )/ pc (catalogue must be attached with tender) (authorization required) , water purifier (u.v.) – technical specification of water storage cooler cum inbuilt purifier :- water storage tank capacity – 120 ltr., no of faucets – 03. (two for cold & one for normal), storage tank material and body material-stainless steel 304, provision of last point purification (uv based), refrigerant- r134a, water recovery – 90-100% , manufacturer should be certified by iso 9001 certification for sales & service and 14001 for manufacturing., certificate of endorsement from indian medical association for manufacturer, and service centre in dhanbad (with standard warranty )/ pc (catalogue must be attached with tender) (authorization required) , water purifier r.o. + uv/ess with inbuilt cooling system with grilling , 60 lph, storage capacity – 80 ltr. with 08 stages of purification and water recovery more than 55% . the manufacturer company should have iso 9001 , 14001 certified and service centre in dhanbad ( with standard warranty )/ pc (catalogue must be attached with tender) (authorization required) , bulb led – 20 watt/ pc. brand- havells, bajaj, surya, crompton, panasonic , chemical earthing installation for machine equipment per pc , copper strip for earthing connection per mtr. , curtain pipe with steel clamp, ring supply & installation / rft. , fan capacitor (condenser) brand- usha/ universal. , glow sine board complete set with all fitting & fixing with material / sft. , hot air blower – electric – 2000 wt. / pc. brand- havells/ roxy/ bajaj/ crompton/ panasonic. , led tube light complete set 20 wt. / set brand- havells/ wipro/ bajaj/ great/ white surya, crompton/ panasonic , led tube light complete set 24 wt. / set. brand- havells/ bajaj/ surya/ great white / crompton/ panasonic , mcb box double pole – 32a with installation / pc. , mcb 32 a with installation / pc. , mcb 15a combind with installation / pc. , 6 a switch with installation / pc. , 6a socket with installation / pc. , 15 a top with installation / pc. , ordinary wire / coil , pedestal fan / pc. brand- havells/usha/khaitan/ bajaj/ polar. , slim led tube light36wt / pc. brand- havells/wipro/ bajaj/ surya/ great white/ panasonic , supply & fixing of battery for u.p.s. 12 volt / 650 va single / pc. - microtech, exide , supply & fixing of wall mounting fan/ pc. brand- havells/usha/khaitan/bajaj/ polar. , supply & fixing of wall mounting stabilizer double phase input to single phase output– 4 kva 90 /volte.- microtech, exide, opto , supply & fixing of wall mounting stabilizer double phase input to single phase output– 5 kva.90 volte. - microtech, exide, opto , supply & fixing of wall mounting stabilizer for a.c. digital 4 kva 90v suitable for 1.5 ton a.c.- microtech, exide, opto , supply & fixing of wall mounting stabilizer for a.c. digital 5 kva 90v suitable for 2 ton a.c. - microtech, exide, opto , supply fixing commissioning with necessary electrical connection of change over 100a /pc. , supply fixing commissioning with necessary electrical connection of change over 200a /pc. , supply fixing commissioning with necessary electrical connection of change over 500a /pc. , supply, fixing & necessary connections of ac box (metal body) complete set with mcb , supply, fixing, commissioning with necessary electrical connection ofbus bar – 100a /pc , supply, fixing, commissioning with necessary electrical connection ofbus bar – 200a /pc , supply, fixing, commissioning with necessary electrical connection ofinsulator / tpn – 100a/ pc , supply, fixing, commissioning with necessary electrical connection ofinsulator / tpn – 32a/ pc , supply, fixing, commissioning with necessary electrical connection ofinsulator / tpn – 63a/ pc , supply, fixing, commissioning with necessary electrical connection ofmain switch – 200a / pc , supply, fixing, commissioning with necessary electrical connection ofmain switch 400apc. , supply, fixing, commissioning with necessary electrical connection ofmain switch 500a per pc. , supply, fixing, commissioning with necessary electrical connection ofmain switch –– 32 a / pc , supply, fixing, commissioning with necessary electrical connection ofmain switch – 63 a / pc , supply, fixing, commissioning with necessary electrical connection ofmain switch –100 a / pc , supply, fixing, commissioning with necessary electrical connection ofopen area shaded bus bar-100a/ pc , supply, fixing, commissioning with necessary electrical connection ofopen area shaded bus-bar-200 a / pc , supply, fixing, commissioning with necessary electrical connection ofopen area shaded bus-bar400a , supply, fixing, commissioning with necessary electrical connection ofopen area shaded bus bar500a , supply, fixing, electrical connection & wall cutting with masonry enclosure ofheavy duty exhaust fan with installation and connection / pc , supply, installation & connection of isolation transformer 10 kva , supply, installation & connection of isolation transformer 5 kva , supply, fixing, commissioning with necessary electrical connection ofisulator /itpn200a/pc. , supply, fixing, commissioning with necessary electrical connection ofisulator /itpn400a/pc. , three phase cable wiring for machine equipments cable size- 25mmm sqmm. p/mtr. , tube light holder / pc , wire copper 3/20per coil , wire copper 7/20 per coil , computer – intel core i5 12th generation processor, ram: minimum 8gb or above, hdd : 01 terabyte or above, dvd writer, monitor – 19.5”, u.p.s. – full set ( with standard warranty )/ pc (catalogue must be attached with tender) (authorization required) , computer – intel core i5 12th generation processor, ram: minimum 8gb or above, hdd : 01 terabyte or above, dvd writer, monitor – 19.5”, u.p.s. – full set ( with standard warranty )/ pc (catalogue must be attached with tender) (authorization required) , laptop( core i5 12th gen, 8gb ram or more, 512gb or more ssd) (authorization required) , 2 in 1 laptop – core i5 12th gen, 8gb or more ram/ 128 g ssd/ 12.3 inch with windows 10, display- touch screen, sd card reader, 5 mp (1080p) front camera, 8 mp (1080p) autofocus rear camera, quad hd led backlit pixel sense touch screen display 10 point multi-touch, 3:2 aspect ratio. (authorization required) , printer laser- all in one laser printer (print,scan, copy & fax) , minimum – 33 ppm, memory – 32 mb, processor speed – 266 mhz or above, duty cycle – 10000 or above, paper tray can hold minimum 250 or above, both side copy capacity when both side printed paper inserted to copy, 33.6 kbps fax modem or above ( with standard warranty )/ pc (catalogue must be attached with tender) (authorization required) , printer laser-single function, minimum –25 ppm or above, memory – 32 mb, processor speed – 266 mhz or above, duty cycle – 10000 or above, paper tray can hold minimum 250 or above ( with standard warranty )/ pc (catalogue must be attached with tender) (authorization required) , scanner – a4, legal size( with standard warranty )/ pc (catalogue must be attached with tender) (authorization required) , biometric finger print usb scanner suitable for aadhar based scanning , bio matric device (iris sensor)-iris scanner usb for aadhar authentication and ayushmand bharat. great for ayushman bharat yojna. provides faster scanning, larger depth of field, wider scanning angle and zero error rates. single iris scanner – usb. (authorization required) , 4g pocket router all sim supported - all 4g sim supported data card. it provides minimum up to 150 mbps speed.plug and play with intuitive web user interface adds to its smooth operation with up to 32 gb memory support. , bar code scanner-supported symbologies :- ean8, ean13, upca, upce, code 39, code 93, code 128, ean 128, codabar, i, intrleave 2 of 5, matrix 2 of 5, msi and all 1d bar codes. light source: - 650 mm laser, scan speed: - 300 scans/sec. scan type: - single laser , usb mso finger scanner(mini size) -all-in-one solution: superior performance enrollment, verification, and identification. government approved bio-metric fingerprint scanner for instant sim activation of all telecom operators. easy plug & play. no prior software installation required. auto detect in your respective application. , multimedia key board for computer / pc , optical mouse for computer (desktop) / pc , making roti tray g.i sheets 24g 60”x36”x6” per pcs , almirah / cabinent lock -painting. standard quality paints and materials. , almirah / cabinent lock -repairing & painting. standard quality paints and materials. , almirah / cabinent lock -changing. , bed iron- painting. standard quality paints and materials. , bed iron- repairing & painting. standard quality paints and materials. , bed side locker- painting. standard quality paints and materials. , bed side locker- repairing & painting. standard quality paints and materials. , bed side screen - painting. standard quality paints and materials. , bed side screen - repairing & painting. standard quality paints and materials. , cardiac bed - painting. standard quality paints and materials. , cardiac bed - repairing & painting. standard quality paints and materials. , dental chair – painting. standard quality paints and materials. , dental chair – repairing & painting. standard quality paints and materials. , examination table - painting. standard quality paints and materials , examination table - repairing & painting. standard quality paints and materials , file cabinet – painting. standard quality paints and materials. , file cabinet – repairing & painting. standard quality paints and materials. , food carrying trolley - painting. standard quality paints and materials. , food carrying trolley - repairing & painting. standard quality paints and materials. , foot step –painting. standard quality paints and materials. , foot step – repairing & painting. standard quality paints and materials. , steel almirah –painting. standard quality paints and materials. , steel almirah – repairing & painting. standard quality paints and materials. , glass painting . , goods carrying trolley -painting. standard quality paints and materials. , goods carrying trolley - repairing & painting. standard quality paints and materials. , installation of steel rod on metal hooks on the doors & windows for parda. , instrument cabinet – painting. standard quality paints and materials. , instrument cabinet – repairing & painting. standard quality paints and materials. , instrument trolley – painting. standard quality paints and materials. , instrument trolley – repairing & painting. standard quality paints and materials. , iron chair neted 3 seater – painting. standard quality paints and materials. , iron chair neted 3 seater – repairing & painting. standard quality paints and materials. , iron chair neted 5 seater – painting. standard quality paints and materials. , iron chair neted 5 seater – repairing & painting. standard quality paints and materials. , moulded chair 3 seater –painting. standard quality paints and materials. , moulded chair 3 seater – repairing & painting. standard quality paints and materials. , g.i. box painting , moulded chair 4 seater painting. standard quality paints and materials. , moulded chair 4 seater repairing & painting. standard quality paints and materials. , moulded chair 5 seater painting. standard quality paints and materials. , moulded chair 5 seater repairing & painting. standard quality paints and materials. , name plate painting , notice board – repairing , o.t. light stand – painting. standard quality paints and materials. , o.t. light stand – repairing & painting. standard quality paints and materials. , o.t. table – painting. standard quality paints and materials. , o.t. table – repairing & painting. standard quality paints and materials. , orthopaedic table- painting. standard quality paints and materials. , orthopaedic table- repairing & painting. standard quality paints and materials. , oxygen trolley – painting. standard quality paints and materials. , oxygen trolley – repairing & painting. standard quality paints and materials. , repair of aluminum door-fitting, fixing with all materials . , repair of aluminum windows - fitting, fixing with all materials. , repair of collapsible gate grill. , repair of door - fitting, fixing with all materials. (aluminum, wooden) , repair of window glass – fitting, fixing with all materials. (aluminum, wooden) , repair of windows - fitting, fixing with all materials. (aluminum, wooden) , repairing of damage mattress with rexene cover (foam where required) , revolving chair –wheel changing with painting , revolving chair – repairing & wheel changing with painting , revolving stool steel - repairing with painting , saline stand – painting. standard quality paints and materials. , saline stand – repairing & painting. standard quality paints and materials. , steel chair – painting. standard quality paints and materials. , steel chair – repairing & painting. standard quality paints and materials. , steel chair with writing pad – painting. standard quality paints and materials. , steel chair with writing pad – repairing & painting. standard quality paints and materials. , steel table painting. standard quality paints and materials. , steel table repairing & painting. standard quality paints and materials. , stretcher trolley / patient trolley -painting. standard quality paints and materials with wheal changing. , stretcher trolley / patient trolley - repairing & painting. standard quality paints and materials with wheal changing. , stretcher trolley / patient trolley - wheel changing. , stretcher trolley / patient trolley - repairing & wheel changing. , twin almirah – painting. standard quality paints and materials. , twin almirah – repairing & painting. standard quality paints and materials. , roofshading water proof metal sheets repairing per sft. , roofshading water proof metal sheets painting per sft. , inverter point wiring with all accessories per mtr. , necessary point wiring & others for machine equipments with all accessories size of wire –10 sq.mm / mtr. , necessary point wiring & others for machine equipments with all accessories size of wire – 04 sq.mm / mtr. , necessary point wiring & others for machine equipments with all accessories size of wire – 06 sq.mm / mtr. , necessary point wiring & others for machine equipments with all accessories size of wire – 1.5 sq.mm / mtr. , re-installation of a.c. machine including old place wall packing, gas charging etc. complete job , repairing & fitting of ac voltage stabilizer single phase , repairing & fitting of ac voltage stabilizer double phase , three phase cable wiring for machine equipments , cable size – 35 sq.mm per mtr. , three phase cable wiring for machine equipments , cable size – 95 sq.mm per mtr. , three phase cable wiring for machine equipments , cable size – 120 sq.mm per mtr. , three phase cable wiring for machine equipments , cable size – 300 sq.mm per mtr. , three phase cable wiring for machine equipments , cable size – 50 sq.mm per mtr. , necessary point wiring & other, size- 2.5 sq. mm , bowl stand - painting. standard quality paints and materials. , bowl stand - repairing & painting. standard quality paints and materials. , medicine trolley- painting. standard quality paints and materials. , medicine trolley- repairing & painting. standard quality paints and materials. , steel rack big. - painting. standard quality paints and materials. , steel rack big. - repairing & painting. standard quality paints and materials. , steel rack small. - painting. standard quality paints and materials. , steel rack small. - repairing & painting. standard quality paints and materials. , labour table.- painting. standard quality paints and materials. , labour table.- repairing & painting. standard quality paints and materials. , visitor chair with cusuion.-painting. standard quality paints and materials. , visitor chair with cusuion.- repairing & painting. standard quality paints and materials. , revolving chair.- painting. standard quality paints and materials. , revolving chair.- repairing & painting. standard quality paints and materials. , book self almirah - painting. standard quality paints and materials. , book self almirah - repairing & painting. standard quality paints and materials. , steel stool- painting. standard quality paints and materials. , steel stool- repairing & painting. standard quality paints and materials. , over bed table. - painting. standard quality paints and materials. , over bed table. - repairing & painting. standard quality paints and materials. , steel chair - painting. standard quality paints and materials. , steel chair - repairing & painting. standard quality paints and materials. , repairing of – wheel chair , abspanel i.c.u bed.- painting. standard quality paints and materials. , abspanel i.c.u bed.- repairing & painting. standard quality paints and materials. , abs semi flower bed.- painting. standard quality paints and materials. , abs semi flower bed.- repairing & painting. standard quality paints and materials. , abs locker - painting. standard quality paints and materials. , abs locker - repairing & painting. standard quality paints and materials. , baby creadle - painting. standard quality paints and materials. , baby creadle - repairing & painting. standard quality paints and materials. , repairing of online ups – 1 kva , repairing of online ups – 2 kva , repairing of online ups – 4 kva , false ceiling with suitable lights- per/ sq. ft. , ply and sunmika work- per/ sq. ft. , floor carpetting – per/ sq.ft. , venyl flooring- per/ltr. , vertical swinds for window – per/ sq. ft. , draw sheet green cloth material reusable standard size – per/pc. , abdominal sheet green cloth material reusable standard size – per/pc. , roof shading waterproof metal asbestos sheet. – per/ sq. ft. , scissors for cloth cutting (shop scissors) , oxygen regulator , humidfier , perineal sheet green cloth material reusable standard size – per/pc. , surgeon apron green cloth material reusable standard size – per/pc. , surgeon kurta reusable standard size – per/pc. , surgeon pajama reusable standard size – per/pc. , surgeon mask green cloth material reusable standard size – per/pc. , surgeon gown impervious green cloth material reusable standard size – per/pc. , surgeon gown green cloth material reusable standard size – per/pc. , bed side screen curtain set of 3 green cloth material reusable standard size – per set , online ups- 2 kvawith battery 100 ah 6 pcs.with complete installation (excide/ microtech) , online ups- 5 kvawith battery 65 ah 15 pcs.with complete installation (exide, microtech) , online ups battery 100 ah , disposable paper plate big size , disposable glass , ball pen (multi colour) , induction cook-top (prestige, havells, bajaj) 2000w , change over – 625a , m.c.c.b 4k- 625a , ph cable 185sq mm , power d.b pannel fabrication 16 swg sheet 60”x30”x12” with 625a bur bar including painting plinth making internal pannel wiring cable socking etc. , survo control 20 kva (manual) , micro oven ( branded company) , cable tray per feet. (best quality) , battery for ups 60 ah with complete installation (excide/ microtech) (authorization required) , battery for ups 26 ah with complete installation (excide/ microtech) (authorization required) , cartridges for brother toner tn- b021 (original cartridge) , cartridges for xerox machine tn 225 (original cartridge) , cartridges for canon mf 3010 (original cartridge) , cartridges for toshiba toner e studio 2809a (original cartridge) , nebulizer machine (best quality) , fumigation machine (best quality) , stethoscope (best quality)

Central Government/Public Sector

TRN :34427526 | 16 May, 2025

Tender Value : 0

Chennai - Tamil Nadu

Tender for gem bids for 40016 item 10: m9635050060- fibre optic cable 6core sm armoured: item 20: m9635050033 fibre optic cable 12 core sm armoured: item 30: m9635100567 cable- ofc 8f 62.5125micron mult. mode:

Central Government/Public Sector

TRN :48475497 | 17 May, 2025

Tender Value : 37.70 Crore

Jaipur - Rajasthan

Tender for tender for provision of klp (ph-ii of two phases) for engr regt at jaipur mil stn; 1 lump sum price worked out by the contractor for building worksas listed in schedule ‘a’ part-i representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the mes 2 lump sum price worked out by the contractor for internal water supply as listed in schedule ‘a’ part-ii representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the mes 3 lump sum price worked out by the contractor for internal electrificationas listed in schedule ‘a’ part-iii representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the mes 4 lump sum price worked out by the contractor for road, path and culvertas listed in schedule ‘a’ part-iv representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the mes 5 lump sum price worked out by the contractor for sewage disposalas listed in schedule ‘a’ part-v representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the mes 6 lump sum price worked out by the contractor for area drainage as listed in schedule ‘a’ part-vi representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the mes 7 lump sum price worked out by the contractor for rain water harwestingas listed in schedule ‘a’ part-vii representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceprepriced by the mes 8 lump sum price worked out by the contractor for external water supplyas listed in schedule ‘a’ part-viii representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the mes 9 lump sum price worked out by the contractor for external electrificationas listed in schedule ‘a’ part-ix representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the mes 10 lump sum price worked out by the contractor for parade ground of size 137 m x 91 m, footbal/hockey 02 nos, basketball courts 02 nos, volley ball courts 02 nos, hardstanding & badminton court 01 noas listed in schedule ‘a’ part-x representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum priceof prepriced by the mes 11 lump sum price worked out by the contractor for compound wall, chain link fencing and gate as listed in schedule ‘a’ part-xi representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the mes 12 lump sum price worked out by the contractor for hot water supplyas listed in schedule ‘a’ part-xii representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the mes 13 lump sum price worked out by the contractor for refrigeration and cold water supplyas listed in schedule ‘a’ part-xiii representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the mes 14 lump sum price worked out by the contractor for site clearance, site developmentand earth workas listed in schedule ‘a’ part-xiv representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the mes 15 lump sum price worked out by the contractor for addn/altn of existing buildings & structures (b/r)as listed in schedule ‘a’ part-xv representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the mes 16 lump sum price worked out by the contractor for addn/altn of existing buildings & structures (e/m)as listed in schedule ‘a’ part-xvi representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the mes 17 lump sum price worked out by the contractor for demolition of buildings & shedsas listed in schedule ‘a’ part-xvii representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the mes 18 sch a part-xviii misc items (to be quoted by contractor) notes:(i) this schedule is not pre-priced by mes and the pre-priced rate indicated as rs 0.00 under column 5 signifies this fact only. (ii) excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under sch a part-xiv (site clearance, site developmentand earth work schedule). 19 pop ealse ceiling for sch a part i building work (officers mess & adm block)m&lforpop false ceilingof approveddesignconsisting of 10mm thick plaster of paris ceiling (gyspsum anhydrous) board including gi frame work for 12mm seamless ceiling comprising of gi perimeter channel of 0.55 mm thick with two unequal flange of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre intermediate channel 0.5 mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with gi cleat and tee, expansion fasteners with and including ceiling section (not exc 1.2m length)of 0.55mm thickness having curved web of 50mm and flange of 26mm each with clips of 10.5mm fixed to intermediate channel with connectingclips across the intermediate channel of 457 mm centre to centre complete. 20 internal water supply (sch a part-ii) s & f 15mm bore angle valve/cock cast copper alloy fancy type screwed down high pressure with cructh or butterfly handle screwed both ends for iron pipe or brass ferrule fixed. make - cera-f1012201, jaquar - ari- chr-39053, kohler - k-80154in-4-cp 21 s & f wall mixer/diverter with diverter plate of bathroom 3 in 1 system with provision for both hand & over head shower with 115mm long bend pipe ( for mixer) connecting legs & wall flangs complete all as specified. make: cera-f1022403, jaquar-flr-chr-5281n, hindware-flora f280022 22 s & f chromium plated brass bath tub spout with wall flange(fancy type) suitable for 15mm bore pipe complete all as specified and directed. make- cera-f1012661, jaquar-spj-chr-429, hindware-f-520009 23 internal electrification (sch a part-iii)supply and fixing sp 63 amp rating, 240v, 10 ka c curve miniature circuit breaker (mcb) of following poles and current carrying capacity in the mcb db complete with connection testing and commissioning complete all as specified and as directed. 24 supply and fix tv coaxial,1 module socket complete all as specified and as directed. 25 s&f telephone socket(jack type) ,1 module rj11 with shutter complete all as specified and as directed. 26 m&l for electrolyte grade solid annealed copper conductor,jelly field,aluminium foiled and aluminium wire braided, rg59 (foam). cat part no. whojttkarg59make- havells or equivalent in as mentioned in appx b of particular specification 27 m&l for pvc insulated telephone cables for indoor applications confirming to technical specification g/wir06/02 cat part no.whttatea1p40 make-havells or equivalent in as mentioned in appx b of particular specification 28 s & f for highly efficient led bulbs, 9 watt complete all as specified and directed. make bajaj/havells/hpl 29 s & f blanking plate complete all as specified and directed. 30 s & f of sheet metal enclosure distribution board vtpn ,4 way, 415 volt, double door powder coated, protection class ip-54, isolated neutral bar, mechanical impact strength ik 09 suitable for mounting mcb & mccb dbs confirming to is-13032, is-8632,bs5484 with min 200 amp raiting copper bus bar and grouting, fixing on wall with nut boldts washers proper with pcc works complete all as specified and directed 31 rain water harwesting(sch a part-vii)borewell for rain water harvesting all as specified and shown on drg : (a) provision of trail bore by drilling with reverse rotary system550mm bore upto 52 m depth incl all works pertaining to boring complete in all respect in aluvium soil/ strata incl hard stone / boulder etc.(b)m&l for 150mm bore cpvc pipe assembly jointing, lowering in any position upto the reqd depth below given level incl jointing the pipe by solvent & screwing 04 nos screws in each joint complete all as directed.(c) ditto as item (b) above but slotted pipe(d) m& l for packing with pea gravel of 4.6 mm to 8mm size of approved quality as ordered to pack arround the casing / slooted pipe in borewell all as directed.(e) m&l 25 mm bore perforated cpvc pipe 52 mtr long for vent pipe 32 external water supply(sch a part-viii). m& l for cutting of existing pipeline of 100/150/80 mm dia for taking branch connection alongwith insertion of di tee and connecting material such as joint, nut bolts, etc all as required at site. 33 m&l for construction ofbrick stone masonary valve pit / chamber of size 900 mm x 600 mm x 1000 mm (internal dimensions) all as shown in drawing no td-573, including necessary excavation and earth work, pcc, plaster in cm 1:6 on inside and outside (above ground), ms angle iron 40 x 40x6.0 mm thick complete all as specified and directed and shown on drawings. 34 all as per item no 33.00 but chamber size 450 mm x 450 mm x 600 mm (internal dimensions) complete all as specified and directed 35 supply and fix stop valves 63mm dia, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed 36 external electrification . (sch a part-ix)supply and fixing led street light fitting 36 wattefficacy greater than 100 lumen/watt 230 v ac outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 65/66 protection complete all as specified and directed. make : phillips, cat no brp046 led 36 cw mr s1 psu gr 9405 or equivalent in as mentioned in appx b of particular specification 37 supply and fixing poly carbonatejunction box , weather and vermin proof of size 250x250x160 including provn of 4 nos aluminium strip 25x3.15 mm size bus bar single phase and neutral suitabely mounted on bus bar insulators,including one no. mcb sp 6 amps for light control,drilling of holes.provn of suitable size of gi nuts, bolts, double washer and fi clamps ofsuitable sizefor taking connections and fixing on lt steel tubular poles complete with locking arrangement complete all as specified and directed. 38 supply install,testing and commissioning lt paneloutdoortype, dust and vermin proof totally enclosed floor mounted factory made, kiosk type with sloping canopy fabricated out of steel sections, the door opening shall not be less than 150 degree. the construction of panel board shall be dust, vermin proof, ip 54 standard double shutter gears front and rear frame work and 3.15 mm thick ms sheet duly painted with powder coated overtwo coats of redoxide primer and made of40 x 40 x 6 mm thick angle iron frame all as specfified including necessay foundation.bolt grouted in floor the panel suitable for 415 volts, 50 c/s 3 phase and nutral system and shall be completed with aluminium bus bar of size ( current ratingnot less than 1.5 times of incoming mccb ) with bus bar chamber,internal wiring with suitable size of pvc insulated copper cable comprising of following accessories:-(main ltp no-01 ) 39 incoming :-(a) mccb 4 pole 320 amp thermal magnetic protection type, 36kamake : legrand, cat no - 4220-06, dpx3 630- 01 no(b) indicating lamp - 3 nos , make : schneider cat no xa2evq1lc to 8lc.(c) led multifunctional meter (make: l&t) -01 no cat no : dm6100outgoing :-(a) mccb 3 pole 160amps thermal magnetic protection type, 36 ka, make : legrand, cat no - 4200-87, dpx 160- 01 nob) mccb 3 pole 200amps thermal magnetic protection type, 36 ka, make : legrand, cat no - 4202-08, dpx 250- 01 no (c) 3 pole power contactor, frame - 1, ac rating 12 a cat no - lc1e1210 make - schneider(d) analog time switch, make- legrand, cat no 4127-80 for sl control 40 supply install,testing and commissioning lt paneloutdoortype, dust and vermin proof totally enclosed floor mounted factory made, kiosk type with sloping canopy fabricated out of steel sections, the door opening shall not be less than 150 degree. the construction of panel board shall be dust, vermin proof, ip 54 standard double shutter gears front and rear frame work and 3.15 mm thick ms sheet duly painted with powder coated overtwo coats of redoxide primer and made of40 x 40 x 6 mm thick angle iron frame all as specfified including necessay foundation.bolt grouted in floor the panel suitable for 415 volts, 50 c/s 3 phase and nutral system and shall be completed with aluminium bus bar of size ( current ratingnot less than 1.5 times of incoming mccb ) with bus bar chamber,internal wiring with suitable size of pvc insulated copper cable comprising of following accessories:-. for ltp -4. 41 incoming:- (a) mccb 4 pole 160 amps thermal magnetic protection type, 25 ka, make : legrand, cat no - 4200-57, dpx 160- 01 no(b) indicating lamp - 3 nos , make : schneider cat no xa2evq1lc to 8lc(c) led multifunctional meter (make: l&t) -01 no cat no : dm6100out going:- (a) mccb 3 pole 63 amp thermal magnetic protection type, 25 ka dpx3 160 legrand, cat no 4200-43 - 02 no (single offr accn + ltp - 08)(b) mccb 3 pole 40 amp thermal magnetic protection type, 25 ka dpx3 160 legrand, cat no 4200-42 - 02 no ( servant qtr + sl)(c) mccb 3 pole 125 a thermal magnetic protection type, 25 ka dpx3 160, legrand, cat no 4200-06 - 01 (offr mess)(d) mcb dp 16amp - 01 no ( garage)(e) 3 pole power contactor, frame - 1, ac rating 12 a cat no - lc1e1210 make - schneider(f) analog time switch, make- legrand, cat no 4127-80 for sl control 42 supply install,testing and commissioning lt paneloutdoortype, dust and vermin proof totally enclosed floor mounted factory made, kiosk type with sloping canopy fabricated out of steel sections, the door opening shall not be less than 150 degree. the construction of panel board shall be dust, vermin proof, ip 54 standard double shutter gears front and rear frame work and 3.15 mm thick ms sheet duly painted with powder coated overtwo coats of redoxide primer and made of40 x 40 x 6 mm thick angle iron frame all as specfified including necessay foundation.bolt grouted in floor the panel suitable for 415 volts, 50 c/s 3 phase and nutral system and shall be completed with aluminium bus bar of size ( current ratingnot less than 1.5 times of incoming mccb ) with bus bar chamber,internal wiring with suitable size of pvc insulated copper cable comprising of following accessories:-. for ltp - 8incoming(a) mccb 4 pole 63 amp thermal magnetic protection type, 16 ka dpx3 160 legrand, cat no 4200-13 - 01 no 43 (b) indicating lamp - 3 nos , make : schneider cat no xa2evq1lc to 8lc(c) led multifunctional meter (make: l&t) -01 no cat no : dm6100out going(a) mcb 2 pole 16 amp, ccurve, 10 ka, legrand, cat no 4086-33 - 10 no 44 supply install,testing and commissioning lt paneloutdoortype, dust and vermin proof totally enclosed floor mounted factory made, kiosk type with sloping canopy fabricated out of steel sections, the door opening shall not be less than 150 degree. the construction of panel board shall be dust, vermin proof, ip 54 standard double shutter gears front and rear frame work and 3.15 mm thick ms sheet duly painted with powder coated overtwo coats of redoxide primer and made of40 x 40 x 6 mm thick angle iron frame all as specfified including necessay foundation.bolt grouted in floor the panel suitable for 415 volts, 50 c/s 3 phase and nutral system and shall be completed with aluminium bus bar of size ( current ratingnot less than 1.5 times of incoming mccb ) with bus bar chamber,internal wiring with suitable size of pvc insulated copper cable comprising of following accessories:-. for ltp -3. 45 incoming(a) mccb 4 pole 200 amps thermal magnetic protection type, 25 ka, make : legrand, cat no - 4202-18, dpx 250- 01 no(b) indicating lamp - 3 nos , make : schneider cat no xa2evq1lc to 8lc(c) led multifunctional meter (make: l&t) -01 no cat no : dm6100out going(a) mccb 3 pole 100 amp thermal magnetic protection type, 25 ka dpx3 160 legrand, cat no 4200-45 - 01 no(ltp - 06)(b) mccb 3 pole 160 a thermal magnetic protection type, 25 ka dpx3 160, legrand, cat no 4200-47 - 01 (adm bldg)(c) mccb 3 pole 40 amp thermal magnetic protection type, 16 ka dpx3 160 legrand, cat no 4200-02 - 02 no (saa stores + old guard house)(d) mcb 2 pole 16 amp, ccurve, 10 ka, legrand, cat no 4086-33 - 03 no(e) 3 pole power contactor, frame - 1, ac rating 12 a cat no - lc1e1210 make - schneider (f) analog time switch, make- legrand, cat no 4127-80 for sl control 46 supply install,testing and commissioning lt paneloutdoortype, dust and vermin proof totally enclosed floor mounted factory made, kiosk type with sloping canopy fabricated out of steel sections, the door opening shall not be less than 150 degree. the construction of panel board shall be dust, vermin proof, ip 54 standard double shutter gears front and rear frame work and 3.15 mm thick ms sheet duly painted with powder coated over two coats of redoxide primer and made of40 x 40 x 6 mm thick angle iron frame all as specfified including necessay foundation.bolt grouted in floor the panel suitable for 415 volts, 50 c/s 3 phase and nutral system and shall be completed with aluminium bus bar of size ( current ratingnot less than 1.5 times of incoming mccb ) with bus bar chamber,internal wiring with suitable size of pvc insulated copper cable comprising of following accessories:-. for ltp -6 47 incoming(a) mccb 4 pole 100 amp thermal magnetic protection type, 25 ka dpx3 160 legrand, cat no 4200-55 - 01 no(b) indicating lamp - 3 nos , make : schneider cat no xa2evq1lc to 8lc(c) led multifunctional meter (make: l&t) -01 no cat no : dm6100out goingm(a) mccb 3 pole 63 amp thermal magnetic protection type, 25 ka dpx3 160 legrand, cat no 4200-43 - 01 no (b) mcb 2 pole 16 amp, ccurve, 10 ka, legrand, cat no 4086-33 - 05 no 48 supply install,testing and commissioning lt paneloutdoortype, dust and vermin proof totally enclosed floor mounted factory made, kiosk type with sloping canopy fabricated out of steel sections, the door opening shall not be less than 150 degree. the construction of panel board shall be dust, vermin proof, ip 54 standard double shutter gears front and rear frame work and 3.15 mm thick ms sheet duly painted with powder coated over two coats of redoxide primer and made of40 x 40 x 6 mm thick angle iron frame all as specfified including necessay foundation.bolt grouted in floor the panel suitable for 415 volts, 50 c/s 3 phase and nutral system and shall be completed with aluminium bus bar of size ( current ratingnot less than 1.5 times of incoming mccb ) with bus bar chamber,internal wiring with suitable size of pvc insulated copper cable comprising of following accessories:-. for ltp -7 49 incoming(a) mccb 4 pole 63 amp thermal magnetic protection type, 25 ka dpx3 160 legrand, cat no 4200-53 - 01 no (b) indicating lamp - 3 nos , make : schneider cat no xa2evq1lc to 8lc(c) led multifunctional meter (make: l&t) -01 no cat no : dm6100out going(a) mccb 3 pole 40 amp thermal magnetic protection type, 16 ka dpx3 160 legrand, cat no 4200-02 - 02 no ( bch + mt office)(b) mcb 2 pole 16 amp, ccurve, 10 ka, legrand, cat no 4086-33 - 13 no (garage) (c) mcb 3 pole 16 amp, ccurve, 10 ka, legrand, cat no 4086-55 - 02 no (car washing + longe wala gate) 50 supply install,testing and commissioning lt paneloutdoortype, dust and vermin proof totally enclosed floor mounted factory made, kiosk type with sloping canopy fabricated out of steel sections, the door opening shall not be less than 150 degree. the construction of panel board shall be dust, vermin proof, ip 54 standard double shutter gears front and rear frame work and 3.15 mm thick ms sheet duly painted with powder coated over two coats of redoxide primer and made of40 x 40 x 6 mm thick angle iron frame all as specfified including necessay foundation.bolt grouted in floor the panel suitable for 415 volts, 50 c/s 3 phase and nutral system and shall be completed with aluminium bus bar of size ( current ratingnot less than 1.5 times of incoming mccb ) with bus bar chamber,internal wiring with suitable size of pvc insulated copper cable comprising of following accessories:- (main ltp no-02 ) 51 incoming (a) mccb 4 pole 400 amp thermal magnetic protection type, 36kamake : legrand, cat no - 4220-07, dpx3 630- 01 no(b) indicating lamp - 3 nos , make : schneider cat no xa2evq1lc to 8lc(c) led multifunctional meter (make: l&t) -01 no cat no : dm6100outgoing (a) mccb 3 pole 200amps thermal magnetic protection type, 36 ka, make : legrand, cat no - 4202-08, dpx 250- 01 no(ltp -02)(b) mccb 3 pole 160amps thermal magnetic protection type, 36 ka, make : legrand, cat no - 4200-87, dpx 160- 01 no (ltp - 01)(c) mccb 3 pole 40 amp thermal magnetic protection type, 25 ka dpx3 160 legrand, cat no 4200-42 - 01 no(ltp - 5)(d) 3 pole power contactor, frame - 1, ac rating 12 a cat no - lc1e1210 make - schneider(e) analog time switch, make- legrand, cat no 4127-80 for sl control 52 supply install,testing and commissioning lt paneloutdoortype, dust and vermin proof totally enclosed floor mounted factory made, kiosk type with sloping canopy fabricated out of steel sections, the door opening shall not be less than 150 degree. the construction of panel board shall be dust, vermin proof, ip 54 standard double shutter gears front and rear frame work and 3.15 mm thick ms sheet duly painted with powder coated over two coats of redoxide primer and made of40 x 40 x 6 mm thick angle iron frame all as specfified including necessay foundation.bolt grouted in floor the panel suitable for 415 volts, 50 c/s 3 phase and nutral system and shall be completed with aluminium bus bar of size ( current ratingnot less than 1.5 times of incoming mccb ) with bus bar chamber,internal wiring with suitable size of pvc insulated copper cable comprising of following accessories:-. for ltp -1 53 incoming(a) mccb 4 pole 160amps thermal magnetic protection type, 25 ka, make : legrand, cat no - 4200-57, dpx3 160- 01 no(b) indicating lamp - 3 nos , make : schneider cat no xa2evq1lc to 8lc(c) led multifunctional meter (make: l&t) -01 no cat no : dm6100out going(a) mccb 3 pole 40 amp thermal magnetic protection type, 25 ka dpx3 160 legrand, cat no 4200-42 - 01 no ( ltp -5)(b) mccb 3 pole 25 amp thermal magnetic protection type, 16 ka dpx3 160 legrand, cat no 4200-01 - 02 no ( fwc + ori )(c) mccb 3 pole 16 amp thermal magnetic protection type, 16 ka dpx3 160 legrand, cat no 4200-00 - 02 no ( religious hall + unit shop)(d) mccb 3 pole 80 amp thermal magnetic protection type, 25 ka dpx3 160 legrand, cat no 4200-44 - 01 no ( trademen shop)(e) 3 pole power contactor, frame - 1, ac rating 12 a cat no - lc1e1210 make - schneider (f) analog time switch, make- legrand, cat no 4127-80 for sl control 54 supply install,testing and commissioning lt paneloutdoortype, dust and vermin proof totally enclosed floor mounted factory made, kiosk type with sloping canopy fabricated out of steel sections, the door opening shall not be less than 150 degree. the construction of panel board shall be dust, vermin proof, ip 54 standard double shutter gears front and rear frame work and 3.15 mm thick ms sheet duly painted with powder coated over two coats of redoxide primer and made of40 x 40 x 6 mm thick angle iron frame all as specfified including necessay foundation.bolt grouted in floor the panel suitable for 415 volts, 50 c/s 3 phase and nutral system and shall be completed with aluminium bus bar of size ( current ratingnot less than 1.5 times of incoming mccb ) with bus bar chamber,internal wiring with suitable size of pvc insulated copper cable comprising of following accessories:-. for ltp -5incoming(a) mccb 4 pole 40 amp thermal magnetic protection type, 16 ka dpx3 160 legrand, cat no 4200-12 - 01 no(b) indicating lamp - 3 nos , make : schneider cat no xa2evq1lc to 8lc(c) led multifunctional meter (make: l&t) -01 no cat no : dm6100 55 out going(a) mccb 3 pole 16 amp thermal magnetic protection type, 16 ka dpx3 160 legrand, cat no 4200-00 - 01 no ( drying & ironing)(b) mcb 2 pole 16 amp, ccurve, 10 ka, legrand, cat no 4086-33 - 4 no (car shed - 01 no + scooter shed - 01 no + dhobi ghat - 02 nos) (c) 3 pole power contactor, frame - 1, ac rating 12 a cat no - lc1e1210 make - schneider(d) analog time switch, make- legrand, cat no 4127-80 for sl control 56 supply install,testing and commissioning lt paneloutdoortype, dust and vermin proof totally enclosed floor mounted factory made, kiosk type with sloping canopy fabricated out of steel sections, the door opening shall not be less than 150 degree. the construction of panel board shall be dust, vermin proof, ip 54 standard double shutter gears front and rear frame work and 3.15 mm thick ms sheet duly painted with powder coated overtwo coats of redoxide primer and made of40 x 40 x 6 mm thick angle iron frame all as specfified including necessay foundation.bolt grouted in floor the panel suitable for 415 volts, 50 c/s 3 phase and nutral system 57 and shall be completed with aluminium bus bar of size ( current ratingnot less than 1.5 times of incoming mccb ) with bus bar chamber,internal wiring with suitable size of pvc insulated copper cable comprising of following accessories:-. for ltp -2incoming(a) mccb 4 pole 200amps thermal magnetic protection type, 25 ka, make : legrand, cat no - 4202-18, dpx3 250- 01 no (b) indicating lamp - 3 nos , make : schneider cat no xa2evq1lc to 8lc(c) led multifunctional meter (make: l&t) -01 no cat no : dm6100out going(a) mccb 3 pole 25 amp thermal magnetic protection type, 25 ka dpx3 160 legrand, cat no 4200-41 - 02 no (s/l jco)(b) mccb 3 pole 16 amp thermal magnetic protection type, 16 ka dpx3 160 legrand, cat no 4200-00 - 04 no ( s/l 01 jco + engr store + def store + old bldg)(c) mccb 3 pole 80 amp thermal magnetic protection type, 25 ka dpx3 160 legrand, cat no 4200-44 - 01 no ( jcos mess)(d) mccb 3 pole 63 amp thermal magnetic protection type, 25 ka dpx3 160 legrand, cat no 4200-43 - 01 no (mi room)(e) mcb 2 pole 16 amp, ccurve, 10 ka, legrand, cat no 4086-33 - 4 nos (car shed - 01 no + scooter shed - 01 no + garage for amb - 01 no +car shed/scooter shed - 01 no ) (f) 3 pole power contactor, frame - 1, ac rating 12 a cat no - lc1e1210 make - schneider(g) analog time switch, make- legrand, cat no 4127-80 for sl control 58 taking down old cable xlpe insulated ,screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor off sizes from existing site 59 dismentling street light bracket off sizes complete all as specified and directed 60 dismantling and taking down lt feeder pillar box off size complete all as specified and directed 61 dismantling and taking down outdoor distribution box off size complete all as specified and directed 62 dismantling and taking down transformers 160 kva to 500 kva and deposit to mes store yard or keeping in safe custody for re-installation complete all as specified and directed 63 parade ground of size 137 m x 91 m, footbal/hockey 02 nos, basketball courts 02 nos, volley ball courts 02 nos, hardstanding & badminton court 01 no (sch a part-x (synthetic floor / mat for basket ball & volley ball courts) m & l for antifungal, anti microbial and u/v resistant comprising of pvc wear resisting coat thickness of 3.5mm to 8mm over of fiber-glass reinforced layer with pvc foaming buffer layer of thickness 4.5mm for good performance in rebounding & absorbing shock complete all as specified and directed 64 refrigeration and cold water supply(sch a part -xiii)supply and fix refrigerator, electric driven (single phase),direct cool single door 5 star refrigeratorwith base drawer with smart inverter compressorcapacitynot less than 185 litrescomplete all as specified and directed 65 supply and fix voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 v to 250 v with output voltage stabilized at 230 v with accuracy of ± 2.5% and of capacity not less than 2.0kva complete all as specified and directed 66 supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 4000 cum per hour (or nearest size) steel body complete all as specified and directed 67 addn/altn of existing buildings & structures (b/r) : schedule a part -xvm & l for providing 5-7mm thick screed bed ofchemical adhresive of approved make for laying floor finishes i,e floor tile etc. complete all as specified and directed. 68 taking down existing water proofing roof treatment of any description cleaning the surface by hacking to received plaster complete all as specified and removing demolised material outside mod land. 69 s & f fibre reinforced uv resistant elastomeric liquid applied waterproofing & heat reflective coating with acrylic polymers and polyester/glass fibres after scraping and properly cleaning the surface to remove loose perticles with wire brushes complete or as directed water proofing treatment shall be in three coats over a coat of primer and as per manufacturers instructions complete all as specified and directed. 70 m & l for retrieving vegetation growth/plants from wall roofs, chajja upto double storey height incl taking out deep roots and pouring hcl acid and making good the distrubance surfaces with cm 1:4 incl all means required at site complete all as specified and directed 71 addn/altn of existing buildings & structures (e/m) : schedule a part -xvitaking down of existing unsv sub main wiring any size incl pvc/steel conduit complete and making good to disturbed surfaces complete all as specified and directed. 72 taking down of existing unsv dbs any size complete all as specified and directed 73 supply & fixing of mcbs, 10 ka rupturing capacity, is-8828 marked,dp 10 ampsand fixing in dbs complete all as specified and directed(note:- dbs shall be measured and paid separately in respective item) 74 all as per items no 63.00 butdp 20 amps 75 all as per items no no 63.00 but 4p 25 amps 76 all as per items no no 63.00 but sp 6 amps 77 all as per items no no 63.00 but sp 10 amps 78 all as per items no no 63.00 but sp 20 amps 79 demolition of buildings & sheds : schedule a part -xvii taking down carefully by carefully unscrewing serviceable/unserviceable dbs,any sizes 415 volt complete with bus bar and rails for easy mounting of mcbs complete with from boards and disconnecting from incoming and outgoing complete all as specified and directed 80 taking down sub main wiring of any sizes complete all as specified and directed 81 arbouriculture work laying of lawns including ploughing leveling breaking of clods manuring & removal of stones etc. (cost of manure or extra good earth to be paid separately) maintenance of lawns for 30 days more till the grass forms a thick lawns free from weeds & fit for moving in the duration of planting if lawn die some where the contractor will replant it at his own cost. in rows 5 cms. apart in either direction 82 supply of different flower plants 900mm to 1500mm at site including loading / unloading & transportation etc.complete all as specified and directed 83 supply of different varieties of shrubs 600mm to 900mm at site including loading / unloading & transportation etc.complete all as specified and directed 84 supply of different varieties of climbers 900mm to 1500mm at site including loading / unloading & transportation etc.complete all as specified and directed 85 supply of different varieties of palms in polyethylene bags / earthen pots according to height growth & age of the plant at site including loading / unloading & transportation etc .complete all as specified and directed 86 supply & planting of shady plants (neem, peepal, goolar, jamun, imli or other specified) along including the following activities :-(a)preparation of soil including & removing of unwanted shrubs removal of stones & garbage.(b) supply of plant at site of two years of age & height more than 1.50mtr.(c)supply of dry manure (farm yard manure.(d)supply of insecticides.(e)digging of pits size 60x60x60 cms. 87 supply & planting of ornamental plants (kachnar, amaltas, gulmohar, arjun, jacranda etc. or other specified) along including the following activities :-(a)preparation of soil including cleaning & removing of unwanted shrubs removal of stones & garbage.(b)supply of plant at site oftwo years of age & height more than 1.50mtr.(c)supply of dry manure (farm yard manure organic).(d)supply of insecticides.(e)digging of pits size 60x60x60 cms. including removal of stones, manu-ring application of insecticides & watering at least15 liter per plant after planting.(f)watering to plants.

Statutory Bodies and Commissions/Committees

TRN :48330395 | 15 May, 2025

Tender Value : 2.00 Crore

Shillong - Meghalaya

Tender for cardiac stents and consumables, on consignment basis , group –a1 consumables & accessories, etc , puncture needle for vascular access • 18g • 6-7.5 cm long • 0.038 inch guide wire compatible • should be supplied individually packed • needle should have protected plastic tube covering , puncture needle dedicated for radial artery access • 20-22g • 3-5 cm long • 0.021 or 0.025 inch guide wire compatible • should be supplied individually packed • needle should have protected plastic tube covering , doppler puncture needle (with facility of detecting doppler signals of vascular structures) , special puncture needle with facility of detecting ultrasound images of vascular structures) , introducer sheath for adults (size 4fr.-9fr.) (standard length) • sizes 4french/5 french /6 french /7 french /8 french /9 french. • 10-11 cm long • 0.035 or 0.038 inch guide wire compatible • with haemostatic valve to prevent back leak and air aspiration • integral side port with attached 3-way stopcock • with suture eye for securing sheath • kink resistant • with dilator-hub lock mechanism to prevent its back-out during insertion • with smooth and resistance free insertion , introducer sheath with puncture needle for adults (size 4fr.-9fr.) (standard length) • sizes 4french/5 french /6 french /7 french /8 french /9 french. • 10-11 cm long • pack must include 18 g, 6-7.5 cm long puncture needle • 0.035 or 0.038 inch guide wire compatible • with haemostatic valve to prevent back leak and air aspiration • integral side port with attached 3-way stopcock • with suture eye for securing sheath • kink resistant • with dilator-hub lock mechanism to prevent its back-out during insertion • with smooth and resistance free insertion , introducer sheath for adults (size 10fr.-11fr.) (standard length) • 10fr.& 11 fr. • 10-11 cm long • 0.035 or 0.038 inch guide wire compatible • with haemostatic valve to prevent back leak and air aspiration • integral side port with attached 3-way stopcock • with suture eye for securing sheath • kink resistant • with dilator-hub lock mechanism to prevent its back-out during insertion • with smooth and resistance free insertion , introducer sheath for adults (size 12fr. and higher) (standard length) • 12fr/13 fr./14 fr. and higher • 10-11 cm long • 0.035 or 0.038 inch guide wire compatible • with haemostatic valve to prevent back leak and air aspiration • integral side port with attached 3-way stopcock • with suture eye for securing sheath • kink resistant • with dilator-hub lock mechanism to prevent its back-out during insertion • with smooth and resistance free insertion , long introducer sheath (20-30 cm long) (size 5fr.-9fr.) • sizes 5 french /6 french /7 french /8 french /9 french. • sheath should be between 20-30 cm long • 0.035 or 0.038 inch guide wire compatible • with haemostatic valve to prevent back leak and air aspiration • integral side port with attached 3-way stopcock • with suture eye for securing sheath • kink resistant • with dilator-hub lock mechanism to prevent its back-out during insertion • with smooth and resistance free insertion , long introducer sheath (20-30 cm long) (size 10fr.-11fr.) • 10 french & 11 french • sheath should be between 20-30 cm long • 0.035 or 0.038 inch guide wire compatible • with haemostatic valve to prevent back leak and air aspiration • integral side port with attached 3-way stopcock • with suture eye for securing sheath • kink resistant • with dilator-hub lock mechanism to prevent its back-out during insertion • with smooth and resistance free insertion , patient transfer and or table super absorbent sheet having loading capacity upto 150 kg size 210x80cm • composite of air formed nonwoven and cross-linked acrylate copolymer. • hotmelt adhesive based hydrocarbons, styrene, rubber copolymer and resin. • loading capacity of 150kg • dimension of 210cm x 80cm absorption capacity of 1.5 ltr , extra thin floor cover made with clean, extremely absorbent cellulose-based material having thermo-mechanic fibre connectors without adhesive and binding agents for freely and swiftly absorption of fluid, non-slip backside, retains 1.5 to 1.7 ltr of fluids • supercore having cellulose and sodiumpolycarylate bonded with thermo-mechanic fibre connectors without any adhesive and binding agents • pp-nonwoven hydrophiliated surface and rear side • quick absorption facility with long-term binding of large quantities of liquid upto 1.7 ltr • extra thin and individual cuttable • easy in use on floors, tables and beds in operating theatres during medical examinations • facility to absorb fluids from both sides • non-slip proof backside having size of 116cm x 76cm , breathable fluid and germ impermeable, skin friendly having smooth surface transfer and repositioning sheet retains upto 1.9 ltr of fluids and upto 100kg weight capacity • odourless, insoluble fluid and germ impermeable skin friendly • supercore® technolgoy composite of 76% cellulose and 24% sodiumpolyacrrylate for impressive absorbency and excellent fluid dispersion than conventional airlaids • having weight of ca. 295g • having loading capacity upto 100kg with dimension of 80 x 210cm having absorption capacity of 2900 ml/pc or 1800ml/m2 , radiation protection body contoured endoskeleton with 0.5mm lead equivalence. bilayer for protection, with mantis arms, proprietary illiac crest belt for efficient weight redistribution ensuring no weight on the shoulders and spine • bilayer with mantis arms, iliac crest belt for efficient weight redistribution to ensure no weight on shoulder and spine • made with highest quality core material product in lead and non-lead materials • having durable and flexible endoskeleton • having comfort and adjustable belt with memory foam interior and spacer mesh to help regulate users temperature • available in 0.5mm lead equivalence available in small, medium, large and x-large stocked , group –a2 , long introducer sheath (20-30 cm long) (size 12fr. and higher) • 12fr./13 fr./14 fr. and higher • sheath should be between 20-30 cm long • 0.035 or 0.038 inch guide wire compatible • with haemostatic valve to prevent back leak and air aspiration • integral side port with attached 3-way stopcock • with suture eye for securing sheath • kink resistant • with dilator-hub lock mechanism to prevent its back-out during insertion • with smooth and resistance free insertion , long introducer sheath (30-50 cm long) (size 5fr.-9fr.) • sizes 5 french /6 french /7 french /8 french /9 french. • between 30-50 cm long • 0.035 or 0.038 inch guide wire compatible • with haemostatic valve to prevent back leak and air aspiration • integral side port with attached 3-way stopcock • kink resistant • with dilator-hub lock mechanism to prevent its back-out during insertion • with smooth and resistance free insertion , long introducer sheath (30-50 cm long) (size 10 fr.-11fr.) • sizes of 10 french & 11 french • between 30-50 cm long • 0.035 or 0.038 inch guide wire compatible • with haemostatic valve to prevent back leak and air aspiration • integral side port with attached 3-way stopcock • kink resistant • with dilator-hub lock mechanism to prevent its back-out during insertion • with smooth and resistance free insertion , long introducer sheath (30-50 cm long) (size 12 fr. and higher) • sizes of 12 french/13 french/ 14 french and higher • between 30-50 cm long • 0.035 or 0.038 inch guide wire compatible with haemostatic valve to prevent back leak and air aspiration • integral side port with attached 3-way stopcock • kink resistant • with dilator-hub lock mechanism to prevent its back-out during insertion • with smooth and resistance free insertion , extra long introducer sheath (> 50 cm) (size 5fr.-9fr.) • 5 french /6 french /7 french /8 french /9 french. • more than 50 cm long • 0.035 or 0.038 inch guide wire compatible with haemostatic valve to prevent back leak and airaspiration • integral side port with attached 3-way stopcock • kink resistant • with dilator-hub lock mechanism to prevent its back-out during insertion • with smooth and resistance free insertion , extra long introducer sheath (> 50 cm) (size 10 fr.-11fr.) • sizes of 10fr.& 11 fr. • more than 50 cm long • 0.035 or 0.038 inch guide wire compatible • with haemostatic valve to prevent back leak and air aspiration • integral side port with attached 3-way stopcock • kink resistant • with dilator-hub lock mechanism to prevent its back-out during insertion • with smooth and resistance free insertion , extra long introducer sheath (> 50 cm) (size 12fr.and higher) • sizes of 12fr./13 fr./14 fr. and higher • more than 50 cm long • 0.035 or 0.038 inch guide wire compatible with haemostatic valve to prevent back leak and airaspiration • integral side port with attached 3-way stopcock • kink resistant • with dilator-hub lock mechanism to prevent its back-out during insertion • with smooth and resistance free insertion , introducer sheath dedicated for trans radial access • sizes from 4french/5french/ 6 french/7 french • between 7-11 cm long • 0.021 or 0.025 inch guide wire compatible • with haemostatic valve to prevent back leak and air aspiration • with integral side port with attached 3-way stopcock • with suture eye for securing sheath • kink resistant • with dilator-hub lock mechanism to prevent its back-out during insertion • should have smooth and resistance free insertion , long introducer sheath dedicated for transradial access • sizes from 4french/5french/ 6 french/7 french • between 16-24 cm long • 0.021 or 0.025 inch guide wire compatible • with haemostatic valve to prevent back leak and air aspiration • with integral side port with attached 3-way stopcock • with suture eye for securing sheath • kink resistant • with dilator-hub lock mechanism to prevent its back-out during insertion • should have smooth and resistance free insertion , transradial introducer kit • includes 21 g puncture needle • 0.021 inch introducer guide wire • introducer sheath sizes from 4french/5french/ 6 french/7 french • sheath size between 10-24 cm long , group - a3 , ptfe coated diagnostic guide wire - (regular length, regular stiffness) • should be available in 0.025, 0.032, 0.035 and 0.038 inches size • should be between 145-180 cm long • should be available as straight & j-shaped tip • should be available in variable lengths of flexible/floppy end • should be available in variable j tip sizes • should be available in fixed as well as movable core , ptfe coated diagnostic guide wire - (exchange length, regular stiffness) • should be available in 0.025, 0.032, 0.035 and 0.038 inches size • should be 240-300 cm long • should be available as straight or j-shaped tip • should be available in fixed as well as movable core , ptfe coated diagnostic 0.032 inch guide wire - (regular length, extrastiff shaft strength) -amplatz type • should be available in 0.032 inches size • should be between 145-180 cm long • should be available as straight & j-shaped tip , ptfe coated diagnostic 0.032 inch guide wire - (regular length, extrastiff shaft strength) -amplatz type • should be available in 0.032 inches size • should be between 240-300 cm long • should be available as straight & j-shaped tip , ptfe coated diagnostic guide wire - (regular length, extrastiff shaft strength) -amplatz type • should be available in 0.035 inches size and higher • should be between 145-180 cm long • should be available as straight & j-shaped tip , ptfe coated diagnostic guide wire - exchange length, extrastiff shaft strength) -amplatz type • should be available in 0.035 inches size and higher • should be between 240-300 cm long • should be available as straight & j-shaped tip , ptfe coated diagnostic guide wire - regular length,ultra stiff shaft strength) -amplatz super stiff type • should be available in 0.032, 0.35, 0.038 inches size • should be between 145-180 cm long • should be available as straight or j-shaped tip; should have extra ordinary or exceptional shaft strength , ptfe coated diagnostic guide wire - exchange length,ultra stiff shaft strength) -amplatz super stiff type • should be available in 0.032, 0.035 and 0.038 inches size • should be between 240-300 cm long • should have extra ordinary or exceptional shaft strength , pigtail catheter • 4french/5french/6french/7french/8french size • should be available in various lengths , angled pigtail catheter • 4french/5french/6french/7french/8french size • should be available in various lengths , group-a4 , pigtail catheter with marker • 4french/5french/6french/7french/8french size • should be available in various lengths , judkins catheter • 4french/5french/6french/7french/8french size left and right judkins catheters in various standard curves and lengths. , multipurpose catheter • 4french/5french/6french/7french/8french size multipurpose catheter in various standard curves and lengths. , amplatz catheter- 4french/5french/6french/7french/8french amplatz left (al) and amplatz right (ar) catheter in various standard curves and lengths , internal mammary catheter – • 4french/5french/6french/7french/8french in various standard curves and lengths , by- pass graft catheters- • 4french/5french/6french/7french/8french in various standard curves and lengths. , transradial diagnostic coronary catheters - • 4french/5french/6french/7french diagnostic coronary catheters of various curves and lengths dedicated for trans radial coronary angiography , nih catheter- • 4french/5french/6french/7french/8french in various standard curves and lengths. , cournard catheter- • 4french/5french/6french/7french/8french in various standard curves and lengths. , thermo dilution catheter • should be compatible with the available system , group –b1 , ptca inflation device • efficient locking system to maintain high pressure • rapid inflation and deflation • clear barrel for easy visualization of de-bubbling • luminescent analog pressure gauge (up to 30 atm) • ergomatric and user friendly hand held design , tuohy borst (haemostatic y-connector) for ptca- rotating mechanism • should accommodate virtually all interventional devices • large thumb wheel for easy maneuverability • luer connector at the guiding catheter end • rotating adapter at the guiding catheter end , tuohy borst (haemostatic y-connector) for ptca- push mechanism • should accommodate virtually all interventional devices • luer connector at the guiding catheter end • rotating adapter at the guiding catheter end • should have bleed back safety mechanism • stepwise control for open, semi-open and closed position , tuohy borst- double (haemostatic y-connector) for bifurcation ptca • two ports for insertion of interventional devices • luer connector at the guiding catheter end • rotating adapter at the guiding catheter end , large bore tuohy borst (haemostatic y-connector) , ptca guide wire torquer • should hold guide wires from 0.009-0.018 inches • ergomatric and user friendly design , ptca guide wire insertion needle • 20 g size • 10 -12 cm long • should hold up to 0.018 inch guide wire , ptca guide wire accessory kit containing • haemostatic y connector • ptca guide wire torquer • ptca guide wire insertion needle , ptca inflation device with accessory kit containing • ptca inflation device • haemostatic y connector • ptca guide wire torquer • ptca guide wire insertion needle , control syringes for ptca • clear, glass-like plastic syringe • markings up to 10 or 12 ml • palm and finger assisted easy maneuverability • plunger should have resistance free movement • should have a stopper with 0.5 ml reserve , group -b2 , connector tubing (connecting between touhy borst and manifold) • should be between 20- 50 cm • should have large i.d for easy flow of contrast • should take high pressure • should be flexible • should have male and female hubs , manifold for ptca with two side ports • large i.d for easy flow of contrast • smooth resistance free unidirection handle/knob , manifold for ptca with three side ports • large i.d for easy flow of contrast • smooth resistance free unidirection handle/knob , manifold with attached tubings • two side port manifold • one connector tubing for connecting manifold to tuohyborst • one luer lock control syringe (10 or 12 ml) for contrast injection • one large bore tubing (with flow regulating knob) for withdrawing contrast • one three way stop-cock , ptca kit: should contain the following items • one tuohyborst (haemostatic y- connector) • one two side-port manifold • one connector tubing for connecting manifold to tuohyborst • one luer lock control syringe having markings up to 10 or 12 ml for contrast injection • one ptca guide wire insertion needle • one ptca guide wire torquer • one large bore contrast tubing (with flow regulating knob) for attachment between contrast bottleand manifold side port • one pressure monitoring line (150 cm) • one three way stop-cock , femoral compression devices- disc/dome based compression , domes of femoral compression device , ptca guiding catheter- • sizes of 5fr, 6fr, 7fr and 8fr. • all possible shapes including catheters: judkins/femoral left and right, extra back up support,amplatz, voda, multipurpose, hockey stick, transradial interventions, bypass-graft/limainterventions and others • should also have availability of smaller length catheters (90 cm) • should also have availability of catheters with side holes • should also have short tip catheter , large lumen (i.d) ptca guiding cathete (6 french size) • must have i.d of more than 0.070 inch • should have all possible shapes including catheters: judkins/femoral left and right, extra back upsupport, amplatz, voda, multipurpose, hockey stick, transradial interventions, bypassgraft/lima interventions, short tip catheters and others , large lumen (i.d) ptca guiding cathete (7 french size) - • must have i.d of more than 0.080 inch • should have all possible shapes including catheters: judkins/femoral left and right, extra back upsupport, amplatz, voda, multipurpose, hockey stick, transradial interventions, bypassgraft/lima interventions, short tip catheters and others , guide extension catheter with the working length of 150 cm and guide extension segment upto 40cm with 1x1 stainless steel wire braiding with hydrophilic coating and compatible with 6f/7f and 8f femoral guide catheter , group -b3 , ptca guiding catheter for dca , ptca guide wire -regular length, regular shaft support and floppy tip , ptca guide wire -regular length, extra- support shaft and floppy tip , ptca guide wire - exchange length , ptca guide wire- hydrophilic coated, regular length , ptca guide wire- hydrophilic coated, exchange length , special ptca guide wires with elastinite core and stainless steel , shaft support • both regular and exchange length wires • should have wires with varying degree of shaft support , special ptca guide wire with dual coating • should have distal hydrophilic coating and proximal hydrophobic coating • should have wires with variable tip stiffness and variable shaft support , special ptca guide wire with multiple markers for measuring the length of stenotic segment , ptca guide wires for chronic total occlusion (cto) , group -b4 , special non-tapering ptca guide wires for cto with platinum iridiumdistal spring coil • wires available in variable distal tip stiffness, measured in terms of grams , special tapering ptca guide wires for cto with platinum iridiumdistal spring coil • wires available in variable distal tip stiffness, measured in terms of grams , special tapering ptca guide wires for cto withhydrocoathydrophiliccoating • wires available in variable distal tip stiffness , • special hydrophilic ptca guide wires for cto with super elasticalloy (ni-ti) core polyurethrane hydrophilic distal coating , special ptca guide wires for cto, dedicated for retrogradeapproach , extension (doc) wire for approved regular length ptca guide wires , penetration catheters for cto having rotational bluntpenetration , penetration devices for cto by blunt dissection using acuating jaws , ptca guide wire with bidirectional deflectable distal tip , ptca catheter with deflectable distal end • should guide the direction of ptca guide wire , cto reentry system with 2 over the wire lumens and 2 hubs, 3 exit ports for 360 degree functionality for sgr technique 18g • over the wire dual wire lumen micro catheter • 1.5f lesion entry profile* • two separate otw lumens and three exit ports 360 degree guidewire redirection option , dual lumen device for simultaneous haematoma aspiration and redirection of guidewire in true lumen in complex cto cases, 360 degree access • 2.3fx3.3f distal shaft profile and 2.6fx3.4f proximal shaft profile • 0.014” guidewire compatibility • usable length of 140cm additional exit port in the tip lumen of the exit port of the stylet lumen , trapping device for wire trapping used with otw devices with lowest shaft profile of 2f • single use device consisting of hub, shaft and balloon • highly compatible small shaft profile of 2f • designed to trap the guidewire at low inflation pressure depth marker for 90cm guide catheter , intra coronary guide extension catehter • flex zone and unique 3 zone transition for smooth trackability • highest coiling density for extra pushability • 25cm rapid exchange section • two exit markers at 95cm and 105cm working length of 150cm , group -b5 , ptca balloon (non-compliant) - • quote both monorail (rapid exchange) and otw balloons • available in all sizes from 2- 4.0 mm, variable lengths • should have a very high rated burst pressure , special large ptca balloons of more than 4 mm • variable lengths , special ptca balloon catheter with low crossing profile • must have crossing balloon profile of less than 0.025 inches , special ptca balloon catheter of less than 1.5 mm • should be available in variable balloon lengths , special otw ptca balloon for septal ablation for hocm , high pressure cto non compliant with low crossing profile (diameter 0.85mm) assorted sizes) • xr (excellent rewrap) balloon material with ultrathin marker bands • hydro-x hydrophilic coating (distal tip to exit port) • invio coating on guidewire lumen • sub-zero flex tip tapered tip with zero guidewire transition for smooth lesion • 0.85mm diameter • p-tech hypotube with excellent transitional balance, pushability and exceptional kink resistance • crossing profile of 0.0313 inches and tip entry profile 0.0208 inches available in sizes 1.5 – 5.00 mm diameter with length of 10,12,15, 20 & 30mm , group -b6 , ptca balloon for retrograde approach of cto • should be available in both regular and long lengths for retrograde approach , non compliant speciality balloon having the catheter length of 140 cm or more. tip entry profile of 0.019 inch or less and mid- balloon profile of 0.036 inch or less with 3/4 stainless steel cutting blades having a functional height of 0.005 inch. available in a working length of 6, 10 & 15mm and balloon having a working range between 6 to 12 atm. , scoring balloon catheter for ptca , dual wire ptca dilatation catheter , drug eluting ptca balloon using matrix technology , ptca bifurcation balloon , stainless steel coronary stents, premounted on balloon – , stainless steel coronary stents, premounted on balloon – , stainless steel coronary stents, premounted on balloon – , cobalt chromium balloon coronary stents, premounted onballoon – , group -b6- a , coronary stents : non-medicated coronary stent balloonmounted , non-medicated stent on stainless steel platform balloonmounted , non-medicated stent on non-stainless steel platform with uniform ultrathin struts ( up to 60 microns) balloonmounted , non-medicated stent on non-stainless steel platform with uniform thin struts ( 61 to 80 microns) balloonmounted , non-medicated stent on non-stainless steel platform with struts thickness ( > 80 microns) balloonmounted , non-medicated stent on non-stainless steel platform for coronary artery diameters all sizes including 4.5mm or more. balloonmounted , non-medicated stent on non-stainless steel platform for coronary artery disease all lengths including 8mm or less. , group -b6- b -coronary stents : non-medicated coronary stent , balloonmounted , non-medicated stent on stainless steel platform , balloonmounted , non-medicated stent on non-stainless steel platform with uniform ultrathin struts ( up to 60 microns) , balloonmounted , non-medicated stent on non-stainless steel platform with uniform thin struts ( 61 to 80 microns , balloonmounted , non-medicated stent on non-stainless steel platform with struts thickness ( > 80 microns) , balloonmounted , non-medicated stent on non-stainless steel platform for coronary artery diameters all sizes including 4.5mm or more. , balloonmounted , non-medicated stent on non-stainless steel platform for coronary artery disease all lengths including 8mm or less. , group -b6- b.coronary stents : medicated coronary stent -sirolimus eluting , balloon mounted, sirolimus eluting stent with biodurable polymer on stainless steel platform. , balloon mounted, sirolimus eluting stent with biodurable polymer on a non-stainless steel platform. , balloon mounted, sirolimus eluting stent with biodegradable polymer on stainless steel platform. , balloon mounted, sirolimus eluting stent with biodegradable polymer on cocr platform with hybrid stent design and uniform thin struts upto 65 micron, and diameter from 2.25 to 4mm of varying lengths from 10 to 40 mm. , balloon mounted, sirolimus eluting stent with biodegradable polymer on non-stainless steel platform with uniform thin struts (61-80 microns) , balloon mounted, sirolimus eluting stent with biodegradable polymer on non-stainless steel platform with uniform strut thickness greater than 80 microns. , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform ultrathin struts (upto 60 microns) and diameters of 2.0mm to 4.00 mm of varying lengths. , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform thin struts (61 -80 microns) and diameters of 2.0mm to 4.00 mm of varying lengths. , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform strut thickness greater than 80 microns and diameters of 2.0mm to 4.00 mm of varying lengths. , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform ultrathin struts (upto 60 microns) and diameters of 2.25mm to 4.5 mm of varying lengths. , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform ultrathin struts (61-80 microns) and diameters of 2.25mm to 4.5 mm of varying lengths. , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform strut thickness greater than 80 microns and diameters of 2.25mm to 4.5 mm of varying lengths. , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform ultrathin struts (upto 60 microns) of varying lengths including stent length of 8mm or less. , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform ultrathin struts (61-80 microns)of varying lengths including stent length of 8mm or less , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform strut thickness greater than 80 microns and of varying lengths including stent length of 8mm or less , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform ultrathin struts (upto 60 microns) of varying lengths including stent length of 48mm or more , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform ultrathin struts (61-80 microns) of varying lengths including stent length of 48mm or more , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform strut thickness greater than 80 microns and of varying lengths including stent length of 48mm or more , balloon mounted , polymer free, sirolimus eluting stent , group -b6- c - coronary stents : medicated coronary stent -drug eluting , balloon mounted, sirolimus eluting stent with biodurable polymer on stainless steel platform. , balloon mounted, sirolimus eluting stent with biodurable polymer on a non-stainless steel platform. , balloon mounted, sirolimus eluting stent with biodegradable polymer on stainless steel platform. , balloon mounted, sirolimus eluting stent with biodegradable polymer on cocr platform with hybrid stent design and uniform thin struts upto 65 micron, and diameter from 2.25 to 4mm of varying lengths from 10 to 40 mm. , balloon mounted, sirolimus eluting stent with biodegradable polymer on non-stainless steel platform with uniform thin struts (61-80 microns) , balloon mounted, sirolimus eluting stent with biodegradable polymer on non-stainless steel platform with uniform strut thickness greater than 80 microns. , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform ultrathin struts (upto 60 microns) and diameters of 2.0mm to 4.00 mm of varying lengths. , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform thin struts (61 -80 microns) and diameters of 2.0mm to 4.00 mm of varying lengths. , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform strut thickness greater than 80 microns and diameters of 2.0mm to 4.00 mm of varying lengths. , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform ultrathin struts (upto 60 microns) and diameters of 2.25mm to 4.5 mm of varying lengths. , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform ultrathin struts (61-80 microns) and diameters of 2.25mm to 4.5 mm of varying lengths. , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform strut thickness greater than 80 microns and diameters of 2.25mm to 4.5 mm of varying lengths. , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform ultrathin struts (upto 60 microns) of varying lengths including stent length of 8mm or less. , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform ultrathin struts (61-80 microns)of varying lengths including stent length of 8mm or less , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform strut thickness greater than 80 microns and of varying lengths including stent length of 8mm or less , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform ultrathin struts (upto 60 microns) of varying lengths including stent length of 48mm or more , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform ultrathin struts (61-80 microns) of varying lengths including stent length of 48mm or more , balloon mounted, sirolimus eluting stenton non-stainless steel platform with uniform strut thickness greater than 80 microns and of varying lengths including stent length of 48mm or more , balloon mounted , polymer free, sirolimus eluting stent , group -b6- d coronary stents : medicated coronary stent -drug eluting , balloon mounted, everolimus/zotarolimus eluting stent with biodurable polymer on stainless steel platform. , balloon mounted, everolimus/zotarolimus eluting stent with biodurable polymer on non-stainless steel platform. , balloon mounted, everolimus/zotarolimus eluting stent with biodurable polymer on non-stainless steel platform and diameters of 2.25mm or less to 4.00mm or more of varying lengths. , balloon mounted, everolimus/zotarolimus eluting stent with biodegradable polymer on non stainless steel platform. , balloon mounted, everolimus eluting stent with biodegradable polymer on cocr platform with hybrid stent design and uniform ultrathin struts ( upto 63 micron) and diameters of 2.25 to 4.00mm. , balloon mounted, everolimus/zotarolimus eluting stent with biodegradable polymer on non-stainless steel platform with uniform thin struts (61-80 microns) , balloon mounted, everolimus/zotarolimus eluting stent with biodegradable polymer on non-stainless steel platform with struts thickness greater than 80 microns. , balloon mounted, everolimus/zotarolimus eluting stent on non-stainless steel platform with ultra thin struts ( upto 60 microns) and diameters of 2.0mm to 4.0mm of varying lengths. , balloon mounted, everolimus/zotarolimus eluting stent on non-stainless steel platform with uniform thin struts ( 61-80 microns) and diameters of 2.0mm to 4.0mm of varying lengths. , balloon mounted, everolimus/zotarolimus eluting stent on non-stainless steel platform with uniform strut thickness greater than 80 microns and diameters of 2.0mm to 4.0mm of varying lengths. , balloon mounted, everolimus/zotarolimus eluting stent on non-stainless steel platform with ultra thin struts ( upto 60 microns) and diameters of 2.25 mm to 4.5mm of varying lengths. , balloon mounted, everolimus/zotarolimus eluting stent on non-stainless steel platform with uniform thin struts ( 61-80 microns) and diameters of 2.25 mm to 4.5mm of varying lengths. , balloon mounted, everolimus/zotarolimus eluting stent on non-stainless steel platform with uniform strut thickness greater than 80 microns and diameters of 2.25 mm to 4.5mm of varying lengths. , balloon mounted, everolimus/zotarolimus eluting stent on non-stainless steel platform with ultra thin struts ( upto 60 microns) of varying lengths including stent length 8mm or less. , balloon mounted, everolimus/zotarolimus eluting stent on non-stainless steel platform with uniform thin struts ( 61-80 microns) of varying lengths including stent length 8mm or less. , balloon mounted, everolimus/zotarolimus eluting stent on non-stainless steel platform with uniform strut thickness greater than 80 microns and of varying lengths including stent length 8mm or less. , balloon mounted, everolimus/zotarolimus eluting stent on non-stainless steel platform with ultra thin struts ( upto 60 microns) of varying lengths including stent length 48mm or more. , balloon mounted, everolimus/zotarolimus eluting stent on non-stainless steel platform with uniform thin struts ( 61-80 microns) of varying lengths including stent length 48mm or more. , balloon mounted, everolimus/zotarolimus eluting stent on non-stainless steel platform with uniform strut thickness greater than 80 microns and of varying lengths including stent length 48mm or more. , balloon mounted , polymer free, everolimus/zotarolimus eluting stent , usfda approved platinum chromium everolimus eluting des with abluminally coated bioabsorbable polymer having a thickness not more than 5?m and a bi segment shaft with a midshaft segment made of lasercut hypotube with the length >10cm and minimum of about 500 lasercuts. should be available in diameters from 2.25 to 5.00mm and lengths of 8,12,16,20,24,28,32,38 and 48mm and the total stent thickness < 90?m. , usfda approved platinum chromium everolimus eluting des specifically designed for left main and large proximal vessels with abluminally coated bioabsorbable polymer having a thickness not more than 5?m and a bi segment shaft with a midshaft segment made of hypotube with lasercuts and a 12 peak design. should be available in diameters from 3.50 to 5.00mm and lengths of 8,12,16,20,24,28 and 32 mm withthe overexpansion capability of minimum 6.00 mm. total stent thickness should be < 95?m , usfda approved platinum chromium everolimus eluting des with permanent polymer having a thickness not more than 5?m and a bi segment shaft with a midshaft segment made of lasercut hypotube with the length of 10cm and about 300 lasercuts. should be available in diameters from 2.25 to 4.00mm and lengths of 8,12,16,20,24,28,32 and 38 mm. , sirolimus coated drug eluting coronary stent. hybrid cell design, cobalt-chromium platform with biodegradable polymer, small strut thickness of 50 ?m 5f guide catheter compatible, with variable diameter and length available upto =48mm , everolimus coated drug eluting coronary stent. hybrid cell design, cobalt-chromium platform with biodegradable polymer, small strut thickness of 50 ?m 5f guide catheter compatible, with variable diameter and length available upto =48mm , sirolimus coated drug eluting tapered coronary stent with 0.5 mm difference of diameter between proximal and distal end.cobalt chromium platform with biodegradable polymer, small strut thickness, different diameter of upto 4.5mm (proximal end ) and length available upto = , group -b6- e. medicated coronary stent -paclitaxel eluting , balloon mounted, paclitaxel eluting stent with biodurable polymer on stainless steel platform. , balloon mounted, paclitaxel eluting stent with biodurable polymer on non-stainless steel platform. , balloon mounted, paclitaxel eluting stent with biodegradable polymer on stainless steel platform. , balloon mounted, paclitaxel eluting stent with biodegradable polymer on non-stainless steel platform. , balloon mounted, paclitaxel eluting stent on non-stainless steel platform and diameters of 2.0mm to 4.0mm of varying lengths. , balloon mounted, paclitaxel eluting stent on non-stainless steel platform and diameters of 2.25 mm to 4.5 mm of varying lengths. , balloon mounted, paclitaxel eluting stent on non-stainless steel platform of varying lengths including stent length of 8mm or less. , balloon mounted, paclitaxel eluting stent on non-stainless steel platform of varying lengths including stent length of 48mm or more. , group -b6- f coronary stents : medicated coronary stent -newer limus analogue ( other than sirolimus, everolimus, zotarolimus) , balloon mounted, newer limus analogue with biodurable polymer on stainless steel platform. , balloon mounted, newer limus analogue with with biodurable polymer on non-stainless steel platform. , balloon mounted, newer limus analogue with with biodegradable polymer on stainless steel platform. , balloon mounted, newer limus analogue with with biodegradable polymer on non-stainless steel platform. , balloon mounted, newer limus analogue eluting stent on non-stainless steel platform and diameters of 2.0mm to 4.0mm of varying lengths. , balloon mounted, newer limus analogue eluting stent on non-stainless steel platform and diameters of 2.25 mm to 4.5 mm of varying lengths. , balloon mounted, newer limus analogue eluting stent on non-stainless steel platform of varying lengths including stent length of 8mm or less. , balloon mounted, newer limus analogue eluting stent on non-stainless steel platform of varying lengths including stent length of 48mm or more. , balloon mounted ,newer limus analogue with abluminal drug coating. , group -b6- g other coronary stents , self - expanding drug eluting coronary stent dedicated for bifurcation lesion. , self - expanding drug eluting coronary stent dedicated for side branch access. , balloon mounted drug eluting , tapered coronary stents. , balloon mounted coronary stents covered with flexible mesh sleeve. , self expanding drug eluting coronary stents. , balloon mounted, dual drug coated drug eluting stents. , bioresorbable coronary vascular scaffold. , coronary stent graft/coronary covered stent with sandwich design of variable diameters and lengths. , coronary stent graft/coronary covered stent of variable diameters and lengths, with single stent design and 5 french guide catheter compatibility. , biodurable polymers includesibs( poly styrene-b-isobutylene -b styrene), pbma( poly-n-butyl methacrylate,peva ( polyethelene covinyl acetate), pvdf-hfp(poly vinlidine fluoride hexafluropropylene,0 pc( phosphoryicholine) siloxane copolymer and any other commercially approved biodurable polymer. , paclitaxel coated semi- compliant drug coated balloon having a drug load of less than 3 ?g/mm2 and a balanced hydrophilic hydrophobic excipient with a bi segment inner lumen shaft and a hydrophilic coating on the shaft. available in the diameters of 2.00 to 4.00 mm and lengths of 12mm, 15mm, 20mm & 30mm. working range of 6 to 14 atm for sizes upto 3.0mm & 6 to 12 atm for 3.50 mm & 4.00 mm. , biolimus aa drug eluting stent system • hybrid cobalt chromium stent • abluminal biodegradable polymer with biolimus a9 eluting stents • mid-section s-shape connectors • thin strut cobalt chromium • 1.37mm large cell opening for easy side branch access • excellent trackability and pushability together with low tip entry profile available in sizes of 2.25, 2.50, 2.75, 3.00, 3.50 & 4.00mm dia with stent length of 9, 14, 19, 24, 29, 33 & 36mm , polymer and carrier free drug coated stent with biolimus a9 (ba9) & microstructured abluminal surface, having lower peak force for better tracebility, higher pushability & large cell opening diameter • polymer free and carrier free drug coated stent • biolimus a9 (ba9) and micro structured abluminal surface • lower peak force for better traceability • higher pushability of 49 pft to increase the efficiency of the force • large cell opening diameter 1.702mm to provides better access to side branch for subsequent stents available in sizes of 2.25, 2.50, 2.75, 3.00, 3.50 & 4.00mm dia with stent length of 8, 11, 14, 18, 24, 28, 33 & 36mm , sirolimus eluting coronary side branch stent system.sizes available 2.5mm x 2.5mm,3.0mm x 2.5mm,3.5mm x 2.5mm, 3.5mm x 3.00mm 4.0mm x 3.5mm lengths 16mm, 19mm, 24mm, & 29mm , group-b10 , rotalink plus (advancer and burr) , rotational atherectomy guide wires , rotaglide lubricant , ivus catheter • should be compatible with available machine of make boston scientific , catheter for virtual histology • should be compatible with available machine , catheter for optical coherence refractometry • should be compatible with available machine , drug delivery/infusion catheter , coronary probing catheter , coronary perfusion catheter , coronary trapeer catheter , group--b11 , special micro -catheter for cto retrograde approach , thrombectomy catheters with manual suction during ptca , thrombectomy catheters with distal balloon occlusion andautomated suction during ptca , thrombectomy catheters with motorized cutting and suction during ptca , doppler wire for ptca , presssure wire for ptca , group-b12 , embolic protection devices based on filter technology/mechanism , embolic protection devices with distal balloon occlusive technology , embolic protection devices with proximal balloon occlusive technology , arterial puncture closure devices - collagen plug based , arterial puncture closure devices - suture based , disposable femoral compression devices- balloon based compression , compression devices for radial artery- balloon based compression , compression devices for radial artery- strap based compression , ptca guide wire re-entry catheter for cto , coronary micro catheter- , group –c (drugs used in cath lab during coronay interventios) , injection nikorandil (2 mg) , injection bivaluridin , injection tirofiban , injection eptifibatide , injection abciximab , group– d1 , puncture needle for vascular access for paediatric / neonatal use • 20-22g • 3-5 cm long • 0.021 or 0.025 inch guide wire compatible • should be supplied individually packed • needle should have protected plastic tube covering , intravenous cannula ‘medicut’ type for vascular access • available in 16, 18, 20, 22 g • supplied with an attached luer-lock 2 ml syringe • individually packed with easy peel off , intravenous cannula for vascular access • available in 16, 18, 20, 22 g • 20 g should allow the passage of 0.025 hydrophilic guide wire • individually packed with easy peel off , intravenous cannula for vascular access in neonates • available in 24, 26 g • individually packed with easy peel off , introducer sheaths for pediatric use (size 4-6fr.) with straight introducer wire • sizes 4french/5french/6 french • between 5.5-7.5 cm long • 0.021 inch straight introducer guide wire • with haemostatic valve to prevent back leak and air aspiration • with integral side port with attached 3-way stopcock • with suture eye for securing sheath • kink resistant • with dilator-hub lock mechanism to prevent its back-out during insertion • should have smooth and resistance free insertion , introducer sheaths for pediatric use (size 4-6fr.) with j tip introducer wire • sizes 4french/5french/6 french • between 5.5-7.5 cm long • with 0.021 inch introducer guide wire with j tip on one end and straight tip on the other end (bothends should be soft) • with haemostatic valve to prevent back leak and air aspiration • should have integral side port with attached 3-way stopcock • with suture eye for securing sheath • kink resistant • with a dilator-hub lock mechanism to prevent its back-out during insertion • should have smooth and resistance free insertion , introducer sheath of 3 french (fr.) size (for neonatal/ pediatric use) , pigtail catheter (pediatric) - • 4french/5french/6french size • smaller length for neonatal and pediatric use • must be fda approved , judkins catheter (pediatric) - • 4f/5f/6f size left and right judkins catheters in various standard curves and lengths. • must be fda approved , special judkins coronary catheter with 2.5 cm curve (pediatric) • 4f/5f/6f , group-d2 , multiprpose catheter (pediatric) • 4f/5f/6f in various standard curves and lengths , 3- french’ diagnostic catheters for neonatal use • pigtail, judkins, multipurpose, cobra and other diagnostic catheters of 3 fr. size • varying lengths and shapes , special swan ganz catheter with: • 4f catheter should allow the passage of at least 0.021 inch, 5f – 0.025 inch, 6f – 0.035 inch and 7f,8f – 0.038 inch hydrophilic guide wire • must be available in 4f, 5f, 6f and 7f and 8 fr. sizes • catheter should be tapered at tip to ensure uniform diameter of the whole catheter • 10 cm marking along catheter body to confirm insertion depth , balloon tipped angiography catheter , berman cathter • must be available in 4f, 5f, 6f and 7f sizes • should have 6 - 8 holes proximal to the balloon for dye injection • catheter should be tapered at tip to ensure uniform diameter of the whole catheter • 10 cm marking along catheter body to confirm insertion depth , reverse berman catheter • should be available in 4f, 5f, 6f & 7f sizes • catheter should be tapered at tip to ensure uniform diameter of the whole catheter • should have holes proximal to the balloon for dye injection • should have a hole at the proximal tip to allow the passage over the wire , mullins sheath without side arm • should be available in 6 fr./7 fr./ 8fr. sizes • thick and stiff dilator for guiding septal puncture , mullins sheath with side arm • should be available in 6 fr./7 fr./ 8fr. sizes , group-d3 , ptmc balloon ‘inoue type’ with accessories , ptmc balloon of ‘inoue type’ without accessories , ptmc balloon ‘inoue type’ with accessories , ptmc balloon of ‘inoue type’ without accessories- , ptmc balloon ‘inoue type’ with accessories – , ptmc balloon ‘inoue type’ without accessories – , transseptal puncture needle • infants, pediatric and adult sizes • tapering tip • standard curve • hub with angle indicator , group-d4 , asd closure devices with delivery system - • approved for pediatric/adult use • device made of biologically inert material • self-centering, detachable device with delivery cable • available in all the sizes (6 mm – 40 mm) , asd closure device without delivery system , delivery sheath for asd closure device- compatible with the device approved in item no. 27.01 , preloaded asd closure devices - • approved for pediatric/adult use • device made of biologically inert material • preloaded device with delivery cable , asd closure devices with delivery system – • device made of biologically inert material • available in all the sizes , asd closure device without delivery system , delivery sheath for asd closure device- compatible with the device approved in item no at . 27.04 , asd closure device with delivery system – • device made of biologically inert material • available in all the sizes , asd closure device without delivery system – , delivery sheath for asd closure device– compatible with the device approved in item no. at 27.08 , fenestrated asd closure devices , group-d5 , vsd closure devices with delivery system - • approved for pediatric/adult use • device made of biologically inert material • self-centering, detachable device with delivery cable • available in all the sizes , vsd closure devices without delivery system , delivery sheath for vsd closure device - compatible with the device approved in item no.at 28.01 , vsd closure devices with delivery system - • device made of biologically inert material • available in all the sizes , vsd closure devices without delivery system - , delivery sheath for vsd closure device- ce marked compatible with the device approved in item no.at28.04 , vsd closure device with delivery system – • device made of biologically inert material • available in all the sizes , vsd closure device without delivery system – delivery sheath for vsd closure device– compatible with the device approved in item no. at 28.07 , pda closure devices with delivery system - • approved for pediatric/adult use • device made of biologically inert material • self-centering, detachable device with delivery cable • available in all the sizes , group -d6 , pda closure devices without delivery system , delivery sheath for pda closure device - compatible with the device approved in item no.29.01 , pda closure devices without delivery system - • device made of biologically inert material • available in all the sizes , pda closure device without delivery system – , delivery sheath for pda closure device – compatible with the device approved in item no.at 29.04 , pda closure device with delivery system – device made of biologically inert material • available in all the sizes , pda closure device without delivery system – , delivery sheath for pda closure device- compatible with the device approved in item no. at 29.07 , group-d7 , pfo closure device with delivery system – approved for pediatric /adult usedevice made of biologically inert material • available in all the sizes , pfo closure devices without delivery system , delivery sheath for pfo closure device – compatible with the device approved in item no. at 30.01 , pfo closure devices with delivery system - • device made of biologically inert material • available in all the sizes , pfo closure devices without delivery system - , delivery sheath for pfo closure device- compatible with the device approved in item no. at 30.04 , pfo closure device with delivery system – • device made of biologically inert material • available in all the sizes , pfo closure device without delivery system , delivery sheath for pfo closure device– compatible with the device approved in item no. at 30.07 , sizing balloon for device closure – circular shape , sizing balloon for device closure – oval shaped , sizing plate for device closure , group-d8 , delivery cables for asd/vsd/pda devices , retrievers for asd/vsd/pda devices , sheath for retrival of devices , wire 0.018” regular length, regular shaft stiffness • floppy tip • straight / j shaped tip • 140-180 cm long , wire 0.018” regular length, extra- stiff shaft • floppy tip • straight / j shaped tip • 140-180 cm long , wire 0.018” exchange length, regular shaft stiffness • floppy tip • straight / j shaped tip • 240-300 cm long , wire 0.018” exchange length, extra- stiff shaft • floppy tip • straight / j shaped tip • 240-300 cm long , valvoplasty balloon catheters • varying sizes and diameters • approved for pediatric/adult use , special balloon catheter compatible with 4 french sheath • compatible with 0.018 inch guide wire • varying length and diameter , special pediatric valvoplasty balloon catheters compatible with 4 french sheath • compatible with 0.025 inch guide wire • varying length and diameter , group-d9 , valvoplasty balloon catheters (sizes 10 – 22 mm) • approved for pediatric/adult use • varying length and diameter • nominal pressure < 4 atm , balloon catheters (sizes 10 – 22 mm) • approved for pediatric/adult use • varying length and diameter • nominal pressure > 8 atm , balloon in balloon catheter • quote in all sizes , fogarty embolectomy catheter • 4fr/5fr/6 fr sizes • metal rod at tip of the catheter to enable angulations up to 60 degrees , atrial septostomy catheter • 4fr/5fr/6fr sizes , detachable balloon , vascular plugs- fda approved , vascular plugs- ce marked , vascular plugs- approved by dcgi , radiofrequency perforation accessories • compatible with beyliss system , group-d10 , pda coils made of steel • 0.035, 0.038 inches • sizes ranging from 2 x 2 to 15 x 15 , pda coils made of nitinol • 0.035, 0.038 inches • sizes ranging from 2 x 2 to 15 x 15 , pda coils made of platinum • 0.035, 0.038 inches • sizes ranging from 2 x 2 to 15 x 15 , 0.052 inch pda coils made of nitinol • sizes ranging from 2 x 2 to 15 x 15 , 0.052 inch pda coils made of platinum • sizes ranging from 2 x 2 to 15 x 15 , embolisation coils (0.018 inch) • sizes ranging from 2 x 2 to 15 x 15 , embolisation coils (0.035 inch) • sizes ranging from 2 x 2 to 15 x 15 , embolisation coils (0.052 inch) • sizes ranging from 2 x 2 to 15 x 15 , park blade septectomy catheter , group-d11 , balloon expandable pulmonary artery and aortic stents – approved for pediatric/adult use • available in various sizes , self expanding pulmonary artery and aortic stents- • approved for pediatric/adult use • available in various sizes , hydrophilic diagnostic guide wire - radifocus (regular length, regular stiffness) • must be available in 0.025, 0.032, 0.035 and 0.038 inches size • should have superelastic alloy core • should have super flexible wire tip • should be available in straight and angled tip • should be between 120-150 cm long , hydrophilic diagnostic guide wire -‘radifocus’ (exchange length, regular stiffness) • must be available in 0.025, 0.032, 0.035 and 0.038 inches size • should have superelastic alloy core • should have super flexible wire tip • should be available in straight and angled tip • should be 260 cm long , hydrophilic diagnostic guide wire - radifocus (regular length, extra-stiff) • must be available in 0.025, 0.032, 0.035 and 0.038 inches size • should have superelastic alloy core • should have super flexible wire tip • should be available in straight and angled tip o should be between 120-150 cm long , hydrophilic diagnostic guide wire - radifocus (exchange length, extra-stiff) • must be available in 0.025, 0.032, 0.035 and 0.038 inches size • should have superelastic alloy core • should have super flexible wire tip • should be available in straight and angled tip • should be 260 cm long , exchange length 0.035 inch guidewire dedicated for vsd device closure– noodle type , special introducer sheath for transseptal puncture • should include a dilator and sheath • dilator should provide smooth transition with septal puncture needle • should be available in varying sizes • radio-opaque tip marker for precise visualization of sheath • should be kink and collapse resistant • should be flexible , special long sheath with side arm having hausdorf-lock curve for asd device closure • variable lengths and sizes , special long sheaths with side arm having mullins curve, balkans curve, 180 curve and other curves • variable lengths and sizes , ptca inflation device- (maximum pressure upto 10 atm) • luminescent analog pressure gauge with maximum pressure up to 10 atm • efficient locking system to maintain high pressure • rapid inflation and deflation • clear barrel for easy visualization of de-bubbling • ergomatric and user friendly hand held design , group e -12 , disposable radiation protection pad -radial single layer, sterilized packed, non-vinyl, lead (pb)-free and light weight absorbable radial drape for protection from scattered radiation during interventional procedures like radial angioplasty, peripheral & ir etc. should have barc test certificate, and lead equivalency must be at least 0.125mmpb and attenuation shield size: 406mmx305mm mandatory document need to be submitted: • third-party environmental safety document. • clinical proof of attenuation. disposable radiation protection pad -femoral and subclavian single layer, sterilized packed, non-vinyl, lead (pb) -free and light weight absorbable femoral drape for protection from scattered radiation during interventional procedures like ep ablation, cto etc. should have barc test certificate, and lead equivalency must be at least 0.125mmpb and attenuation shield size: 406mmx305mm mandatory document need to be submitted: • third-party environmental safety document. • clinical proof of attenuation. no brainer cap non-lead single layer head cover, non-vinyl, lead (pb) -free x-ray attenuation, light weight surgical cap for radiation safety in all fluoro labs and must be fit all head sizes. should have a lead equivalency must be at least 0.125mmpb. weight should not be more than 95grams and attenuation shield size: 559mmx76mm mandatory document need to be submitted: • third-party environmental safety document. • clinical proof of attenuation , group -f1 , hydrophilic dignostic guide wire - (regular length, regular stiffness) • should be available in 0.025, 0.032, 0.035 and 0.038 inches size • should be available in straight and angled tip • should be between 120-180 cm long • short floppy tip 3-8 cm long , hydrophilic diagnostic guide wire - (exchange length, regular stiffness) • should be available in 0.025, 0.032, 0.035 and 0.038 inches size • should be available in straight and angled tip • should be 260 cm long • short floppy tip 3-8 cm long , hydrophilic diagnostic guide wire - (exchange length, regular stiffness) • should be available in 0.025, 0.032, 0.035 and 0.038 inches size • should be available in straight and angled tip • should be 300 cm long • short floppy tip 3-5 cm long , hydrophilic diagnostic guide wire - (regular length, extra-stiff) - • should be available in 0.025, 0.032, 0.035 and 0.038 inches size • should be available in straight and angled tip • should be between 120-180 cm long • short floppy tip 3-8 cm long , hydrophilic diagnostic guide wire - (exchange length, extra-stiff) • should be available in 0.025, 0.032, 0.035 and 0.038 inches size • should be available in straight and angled tip • 3-5 cm long tip • should be 260 cm long , hydrophilic diagnostic guide wire - (exchange length, extra-stiff) • should be available in 0.025, 0.032, 0.035 and 0.038 inches size • should be available in straight and angled tip • 3-5 cm long tip • should be 300 cm long , ptfe coated extrastiff shaft strength wire- backup meier( regular length) • extremely stiff stainless steel shaft core • flexible short length ‘j’ shaped tip which should be highly radio-opaque . • 0.035 inches • 185 cm long , ptfe coated extra stiff shaft strength exchange wire- backup meier (exchange length) • extremely stiff stainless steel shaft core • flexible short length ‘c’ shaped tip which should be highly radio-opaque . • 0.035 inches • 300 cm long , nitinol 0.014 inch guidewire (exchange length)straight and angled • with hydrophilic coating • 260-300 cm long • with and without flexible tip , nitinol 0.018 inch guidewire (exchange length) • straight and angled • with hydrophilic coating • 260-300 cm long • with and without flexible tip , group -f 2 , heavy duty nitinol alloy extra support wire ( regular length) • 0.014 inches • nitinol alloy • with angled tip-3-5 cm long • tip with platinum/platinum alloy for optimum visualisation • with tfe coating • 180 cm long , heavy duty nitinol alloy extra support wire (exchange length) • 0.014 inches • nitinol alloy • with angled tip-3-5 cm long • tip with platinum/platinum alloy for optimum visualisation • with tfe coating • 270-300 cm long , heavy duty nitinol extra support wire( regular length) • 0.018 inches • nitinol alloy • with angled tip-3-5 cm long • tip with platinum/platinum alloy for optimum visualization • with tfe coating • 180 cm long , heavy duty nitinol extra support wire (exchange length) • 0.018 inches • nitinol alloy • with angled tip: 3-5 cm long • tip with platinum/platinum alloy for optimum visualisation • with tfe coating • 270-300 cm long , steerable high support .014 inch guidewire • ptfe/duraglide coated • distal radiopaque tip 3 cm long • straight and j curve • 180cm long , steerable high support .014 inch guide wire ( exchange) • ptfe/duraglide coated • distal radiopaque tip 3 cm long • straight and j curve • 260-300cm long , cobra catheter • 4french/5french/6french • 65-125 cm long • 021-038 compatible • in various standard curves . , sos omni catheter • 035-038 compatible • 80 cm long , tapered straight catheter • 4french/5french/6french • 70,100 cm long • .035 inch compatible , picard catheter • 4french/5french/6french • 035-038 compatible • in various standard lengths. , group -f3 , renal double curve catheter • in various standard lengths and curves , head hunter catheter • in various standard lengths and curves • 035-038 compatible • 100cm long , simmons/ sidewinder catheter • in various standard lengths and curves • 035-038 compatible • 100cm long , pre -shaped catheter for uterine artery embolisation • in various standard lengths and curves , vertebral catheter • in various standard lengths and curves , coeliac axis catheter • in various standard lengths and curves , shepherd’s hook catheter • in various standard lengths and curves , micro catheters (coiled stainless steel construction) • in various standard lengths and curves • 2-3.8f size • .010-.022 inch wire compatible • with radioopaque marker at tip , micro catheters (braided nitinol construction) • in various standard lengths and curves • 2-3.8f size • .010-.022 inch wire compatible • with radioopaque marker at tip , straight introducer sheath (standard length) with hydro philic introducer guide wire • sizes from 4french/5french/ 6 french/7 french/8frenc/9french • between 7-11 cm long • with 0.035 or 0.038 inch hydrophilic mini guide wire • with plastic cannula for arterial puncture , group -f4 , straight long introducer sheath with hydrophilic introducer guide wire • sizes from 4french/5french/ 6 french/7 french/8frenc/9french • 16 cm long • with 0.035 or 0.038 inch hydrophilic guide wire • with plastic cannula for arterial puncture , straight reinforced sheath with hydrophilic coating • sizes from 6french /7french /8frenc/9french/10french/11french • between 7-11 cm long • with 0.035 or 0.038 inch guide wire compatible • with radio-opaque tip , group -f5 , guiding catheter for peripheral vascular use – – should be braided with low friction inner layer - should have atraumatic soft tip - should be available in various tip shapes and curves for access to different parts of the peripheral vasculature, including renal double curve, cobra, multi-purpose and other shapes - should have od of 6f-8f available - should have the largest id for each od - should have lengths ranging from 55-90 cm , guiding catheter for peripheral vascular use – – should be braided with low friction inner layer - should have hydrophilic coating - should have atraumatic soft tip - should be available in various tip shapes and curves for access to different parts of the peripheral vasculature. - should have od of 6f-10f available - should have the largest id for each od - should have lengths ranging from 55-125 cm , guiding catheter for peripheral vascular use – – should be braided with low friction inner layer - should have hydrophilic coating - should have atraumatic soft tip - should be available in various tip shapes and curves for access to different parts of the peripheral vasculature. - should have od of 5f available with the largest od - should have a minimum length of 55 cm or more , long sheath for peripheral vascular access– - should be kink resistant with a reinforcement mechanism - should be low friction with inner coating to allow catheter manipulation - should have distal radio-opaque tip for enhanced visibility on fluoroscopy - should have smooth transition from dilator to sheath - should have a proximal hemostasis valve/provision for tuohyborst valve - should be color coded for size identification - should be available in various sizes of inner diameters and various lengths and have the largest id available , long sheath for carotid access – - should be kink resistant with a reinforcement mechanism - should be low friction with inner coating to allow catheter manipulation - should have distal radio-opaque tip for enhanced visibility on fluoroscopy - should have smooth transition from dilator to sheath - should have a proximal hemostasis valve/provision for tuohyborst valve - should be color coded for size identification - should be available in 4f-8f size with the largest id - should have a minimum length of 90 cm or more , long sheath for contra-lateral iliac/femoral access – - should be kink resistant with a reinforcement mechanism - should be low friction with inner coating to allow catheter manipulation - should have distal radio-opaque tip for enhanced visibility on fluoroscopy - should have smooth transition from dilator to sheath - should have a proximal hemostasis valve/provision for tuohyborst valve - should be color coded for size identification - should be available in 4f-9f size with the largest id - should have lengths ranging from 40- 110 cm , group -f6 , long sheath for renal access – - should be kink resistant - should be low friction with inner coating to allow catheter manipulation - should have distal radio-opaque tip for enhanced visibility on fluoroscopy - should have smooth transition from dilator to sheath - should have a proximal hemostasis valve/provision for tuohyborst valve - should be color coded for size identification - should be available in 5f-7f size with the largest id - should be at least 55 cm long , high pressure angioplasty balloon for peripheral vascular use – - should have rated burst pressure > 14 atmosphere - should have hydrophilic coating - should be available in various outer diameters and balloon lengths and various shaft lengths , high pressure angioplasty balloon for peripheral vascular use – - should have rated burst pressure > 14 atmosphere - should have hydrophilic coating - should be available in various outer diameters and balloon lengths , high pressure angioplasty balloon for peripheral vascular use – - should have rated burst pressure > 14 atmosphere - should have hydrophilic coating - should be available in various outer diameters and balloon lengths - should be available in various shaft lengths , high pressure angioplasty balloon for peripheral vascular use – - should have rated burst pressure > 14 atmosphere - should have hydrophilic coating - should be available in 4-10 mm (in 1 mm increments) and 12 mm diameters and 2-10 cm balloon length - should have a shaft size of 75-135 cm , high pressure angioplasty balloon for peripheral vascular use– - should have rated burst pressure > 14 atmosphere - should have hydrophilic coating - should be available in 4-12 mm diameter and 2-10 cm balloon length - should have a shaft size of 75-135 cm , high pressure angioplasty balloon for peripheral vascular use– - should have rated burst pressure > 14 atmosphere - should have hydrophilic coating - should be available in 4-12 mm diameter and 2-10 cm balloon length - should have a shaft size of 75-135 cm , peripheral balloon catheter – - should be 0.035” compatible - should be over the wire - should have a burst pressure of at least 10 atmosphere (at least 6 atmosphere for larger balloons) - should have hydrophilic coating - should be available in various sizes of od and balloon lengths - should be available in various shaft lengths , peripheral balloon catheter – - should be 0.035” compatible - should be over the wire - should be non-compliant or semi-compliant - should have hydrophilic coating - should be available in all ods of 3-10 mm and 12 mm and balloon length of 2-10 cm. - should have burst pressure of at least 10 atmosphere (the 12 mm od balloon should have a burst pressureof at least 6 atmosphere) - should pass through a maximum 6f sheath (the 12 mm od balloon should pass through a maximum 7fsheath) - should have a shaft length 80-135 cm , group -f7 , peripheral balloon catheter – - should be 0.035” compatible - should be over the wire - should have a burst pressure of at least 10 atmosphere (at least 6 atmosphere for larger balloons) - should have hydrophilic coating - should be available in various sizes of od and balloon lengths - should be available in various shaft lengths , peripheral balloon catheter – - should be 0.035” compatible - should be over the wire - should be non-compliant or semi-compliant - should have hydrophilic coating - should be available in od of 3-10 mm and 12 mm and balloon length of 2-10 cm. - should have burst pressure of at least 10 atmosphere (the 12 mm od balloon should have a burst pressureof at least 6 atmosphere) - should pass through a maximum 6f sheath (the 12 mm od balloon should pass through a maximum 7fsheath) - should have a shaft length 80-135 cm , peripheral balloon catheter – - should be 0.035” compatible - should be over the wire - should have a burst pressure of at least 10 atmosphere (at least 6 atmosphere for larger balloons) - should have hydrophilic coating - should be available in various sizes of od and balloon lengths - should be available in various shaft lengths , peripheral balloon catheter – - should be 0.035” compatible - should be over the wire - should be non-compliant or semi-compliant - should have hydrophilic coating - should be available in all ods of 3-10 mm and 12 mm and balloon length of 2-10 cm. - should have burst pressure of at least 10 atmosphere (the 12 mm od balloon should have a burst pressureof at least 6 atmosphere) - should pass through a maximum 6f sheath (the 12 mm od balloon should pass through a maximum 7fsheath) - should have a shaft length 80-135 cm , peripheral balloon catheter with large diameter - should be 035” compatible - should be over the wire - should have hydrophilic coating - should have od of 14 mm and more - various lengths of the balloon should be available - should be mounted on various shaft lengths , peripheral balloon catheter with large diameter – - should be 035” compatible - should be over the wire - should have hydrophilic coating - should an od of at least 14 mm - various lengths of the balloon should be available - should be mounted on various shaft lengths , peripheral balloon catheter with large diameter – - should be 035” compatible - should be over the wire - should have hydrophilic coating - should an od of at least 14 mm - various lengths of the balloon should be available - should be mounted on various shaft lengths , peripheral balloon catheter – - should be .014/.018” compatible - should be over the wire - should have hydrophilic coating - should be available in various balloon diameters - should be available in various lengths of the balloon - should be available in various shaft lengths , group -f9 , peripheral compliant balloon with large diameter – - should be .035” compatible - should have od ranging from 10-46 mm - should have shaft length >90 cm - should have shaft of not more than 8f size - should pass through a 12f sheath , peripheral stent balloon mounted – - should be .014/.018” compatible - should be over the wire - should be made of stainless steel alloy - should have balloon od in the range of 4-7 mm - should have balloon/stent lengths in the range of 12-25 mm - should have shaft lengths of 80-150 cm , peripheral stent balloon expandable – - should be .014/.018” compatible - should be over the wire - should be made of stainless steel alloy - should have balloon od in the range of 4-7 mm - should have balloon/stent lengths in the range of 12-25 mm - should have shaft lengths of 80-150 cm , group -f10 , peripheral stent balloon expandable - - should be .014/.018” compatible - should be for rapid exchange - should be made of stainless steel alloy - should have balloon od in the range of 4-7 mm - should have balloon/stent lengths in the range of 12-25 mm - should have shaft lengths of 80-150 cm , peripheral stent balloon expandable – - should be 035” compatible - should be made of stainless steel or cobalt chromium - should be quoted either in open cell or closed cell design - should be available in various balloon ods - should have various balloon/stent lengths available - should have a shaft length of 75-135 cm , peripheral stent balloon mounted – - should be 035” compatible - should be made of stainless steel or cobalt chromium - should be quoted either in open cell or closed cell design - should be available in various balloon ods - should have various balloon/stent lengths available - should have a shaft length of 75-135 cm , peripheral stent balloon expandable – - should be .035” compatible - should be made of stainless steel or cobalt chromium - should be quoted either in open cell or closed cell design - should be available in various balloon ods - should have various balloon/stent lengths available - should have a shaft length of 75-135 cm , peripheral stent balloon expandable – - should be .035” compatible - should be made of stainless steel - should have a tandem architecture design - should have all balloon ods from 5-10 mm in 1 mm increments - should have available various balloon/stent lengths of 20 to 55mm - should have a shaft length of 75 -135 cm , peripheral stent balloon expandable – - should be .035” compatible - should be made of stainless steel - should have a tandem architecture design - should have all balloon ods from 5-10 mm in 1 mm increments - should have available various balloon/stent lengths from 20 to 55 mm - should have a shaft length of 75 -135 cm , peripheral stent balloon expandable - should be .035” compatible - should be made of stainless steel - should have a tandem architecture design - should have all balloon ods from 5-10 mm in 1 mm increments - should have available various balloon/stent lengths from 20 to 55 mm - should have a shaft length of 75 -135 cm , peripheral stent balloon expandable – - should be .035” compatible - should be made of stainless steel - should be laser cut slotted tube with closed cell design - should have balloon ods from 5-25 mm, bare or balloon mounted - should have available various balloon stent/lengths from 2-6 cm - should have a shaft length of up to 135 cm , peripheral stent balloon expandable – - should be .035” compatible - should be made of stainless steel - should be laser cut slotted tube with closed cell design - should have balloon ods from 5-25 mm, bare or balloon mounted - should have available various balloon stent/lengths from 2-6 cm - should have a shaft length of up to 135 cm , peripheral stent balloon expandable – - should be .035” compatible - should be made of stainless steel - should be laser cut slotted tube with closed cell design - should have balloon ods from 5-25 mm, bare or balloon mounted - should have available various balloon stent/lengths from 2-6 cm - should have a shaft length of up to 135 cm , group- f11 , self-expanding peripheral stent – - should be .014/018” compatible - should be over the wire - should be made of nitinol - should have the least lesion crossing profile for all stent diameters - should be available in various stent diameters of 6-10 mm - should be available in various stent lengths from 20-40 mm - should have a shaft length of at least 110 cm , self-expanding peripheral stent – - should be .014/.018” compatible - should be over the wire - should be made of nitinol - should have the least lesion crossing profile for all stent diameters - should be available in various stent diameters of 6-10 mm - should be available in various stent lengths from 20-40 mm - should have a shaft length of at least 110 cm , self-expanding peripheral stent – - should be .014/.018” compatible - should be over the wire - should be made of nitinol - should have the least lesion crossing profile for all stent diameters - should be available in various stent diameters of 6-10 mm - should be available in various stent lengths from 20-40 mm - should have a shaft length of at least 110 cm , self-expanding peripheral stent – - should be .014/.018” compatible - should be over the wire - should be laser cut open cell nitinol tube - should have a low lesion crossing profile - should be available in all stent diameters of 6-10 mm - should be available in stent lengths of 2-6 cm - should be on a shaft length of 110-140 cm , self-expanding peripheral stent – - should be .014/.018” compatible - should be over the wire - should be laser cut open cell nitinol tube - should have a low lesion crossing profile - should be available in all stent diameters of 6-10 mm - should be available in stent lengths of 2-6 cm - should be on a shaft length of 110-140 cm , self-expanding peripheral stent – - should be .014/.018” compatible - should be over the wire - should be laser cut open cell nitinol tube - should have a low lesion crossing profile - should be available in all stent diameters of 6-10 mm - should be available in stent lengths of 2-6 cm - should be on a shaft length of 110-140 cm , self expanding peripheral stent – - should be .014/.018” compatible - should be of rapid exchange type - should be made of nitinol - should be available in stent lengths of 3-4 cm - should have a minimum shaft length of 110 cm , self expanding peripheral stent – - should be .014/.018” compatible - should be of rapid exchange type - should be made of nitinol - should be available in stent lengths of 3-4 cm - should have a minimum shaft length of 110 cm , self expanding peripheral stent – - should be .014/.018” compatible - should be of rapid exchange type - should be made of nitinol - should be available in stent lengths of 3-4 cm - should have a minimum shaft length of 110 cm , self-expanding peripheral stent – - should be .035” compatible - should be over the wire - should be made of nitinol - should be available in various outer diameters - should be of various stent lengths - should be on a shaft length of 80-140 cm , group -f12 , self-expanding peripheral stent – - should be .035” compatible - should be over the wire - should be made of nitinol - should be available in various outer diameters - should be of various stent lengths - should be on a shaft length of 80-140 cm , self-expanding peripheral stent – - should be .035” compatible - should be over the wire - should be made of nitinol - should be available in various outer diameters - should be of various stent lengths - should be on a shaft length of 80-140 cm , self-expanding peripheral stent – - should be .035” compatible - should be over the wire - should be laser cut from single nitinol tube with no welds - should be available in outer diameters of 5-14 mm - should be available in stent lengths of 2-15 cm - should be on a shaft length of 80-140 cm - should be available in various lengths of 20-100 mm , peripheral bio-degradable or absorbable metal stent - should be balloon mounted or self-expanding type - should be available in outer diameters of 4-8 mm - should be available in various lengths of 20-100 mm , group -f13 , dedicated peripheral vascular bifurcation stent - should be balloon mounted - should be available in different diameters and lengths of the stent , self expanding peripheral covered stents – - should be .035” compatible - should be over the wire - should be made of nitinol with fabric coating - should be available in various outer diameters - should be available in various stent lengths - should be on a shaft length of 80-140 cm. , self expanding peripheral covered stents – - should be .035” compatible - should be over the wire - should be made of nitinol with fabric coating - should be available in various outer diameters - should be available in various stent lengths - should be on a shaft length of 80-140 cm , self expanding peripheral covered stents – - should be .035” compatible - should be over the wire - should be made of nitinol with fabric coating - should be available in various outer diameters - should be available in various stent lengths - should be on a shaft length of 80-140 cm. , self expanding peripheral covered stents – - should be .035” compatible - should be over the wire - should be made of nitinol with ptfe coating on the inner lumen - should be available in outer diameters of 5-13 mm - should be avaiable in stent lengths of 2-15 cm - should be on a shaft length of 75-140 cm. , self expanding peripheral covered stents – - should be .035” compatible - should be over the wire - should be made of nitinol with ptfe coating on the inner lumen - should be available in outer diameters of 5-13 mm - should be avaiable in stent lengths of 2-15 cm - should be on a shaft length of 75-140 cm. , self expanding peripheral covered stents - should be .035” compatible - should be over the wire - should be made of nitinol with ptfe coating on the inner lumen - should be available in outer diameters of 5-13 mm - should be avaiable in stent lengths of 2-15 cm - should be on a shaft length of 75-140 cm. , covered stent for transjugular intrahepatic porto-systemic shunt - should be .035/038” compatible - should be made of nitinol with fabric coating - should be with or without a distal uncovered portion - should be available in various outer diameters and stent lengths - should be compatible with the quoted tips set , covered stent for transjugular intrahepatic porto-systemic shunt - should be .035/038” compatible - should be made of nitinol with ptfe coating on inner lumen - should be with a distal at least 2 cm uncovered portion - should be available in all outer diameters of 8,10,12 mm - should be available in all stent lengths of 4,5,6,7,8 cm - the delivery system should be at least 75 cm long - should be compatible with the quoted tips set , embolisation coils - should be .014/018” compatible - should be made of platinum with synthetic fibres - should be non tapering/straight - should be mr compatible - should be available in any or more of the following diameters: 2-10 mm - should be of various lengths; the length of the coil at each diameter should be stated , group- f14 , embolisation coils -should be .014/018” compatible - should be made of platinum with synthetic fibres - should be mr compatible - should taper from a larger to a smaller end - should be available in any or more of the following diameters: 3-10 mm - the diameter to tapered end for tapering type coils should be stated - should be of various lengths; the length of the coil at each diameter should be stated , embolisation coils - should be .035/038” compatible - should be non tapering/straight - should be made of platinum with synthetic fibres - should be mr compatible - should be available in the following sizes: diameter 3-15 mm and length 2-15 cm , embolisation coils - should be .035/038” compatible - should be made of platinum with synthetic fibres - should be mr compatible - should be tapering from a larger to a smaller end - should be available in following sizes: diameter 5-10 mm and length 2-15 cm - the diameter to tapered end for tapering type coils should be mentioned , embolisation coils - should be .035/038/052” compatible - should be non tapering/straight - should be made of stainless steel with synthetic fibres - should be available in the following sizes: diameter 3-15 mm and length 2-15 cm , coil pusher wire for 0.014/0.018” coils, compatible with the quoted microcatheters , polyvinyl alcohol particles for peripheral vascular embolization - should be of non-uniform size - should undergo rapid clumping in the vessels - should cause non-uniform vessel occlusion - should be available in a broad range of sizes (90 microns- 1400 microns) , microspheres for peripheral vascular embolization - should be hydrophilic - should be micro-porous and uniform sized spheres - should be non-aggregating - should be deformable for ease of passage through smaller vessels - the size of spheres should range from40-1200 micrometers , gelfoam sheet for vascular embolization , non-adhesive liquid polymer for controlled embolization - should be ethylene vinyl copolymer in dimethylsulfoxide solution - should be supplied in various concentrations for use depending on lesion morphology , adhesive liquid polymer for vascular embolization - should be n-butyl cyanoacrylate , group -f15 , tantalum powder -should be useful for improved visualization during n-butyl cyanoacrylate embolization - should be supplied as finely ground powder , lipiodol - the material should be iodised oil, containing ethyl esters of iodized fatty acids of poppy seed oil - the iodine content should be a minimum of 480 mg/ml - should useful as opacifying agent for n-butyl cyanoacrylate on fluoroscopy and an organic diluent for thisagent - should be supplied in 10 ml ampoules , sclerosant for intravenous embolization - the compound should be sodium tetradecyl sulfate - should be available in various concentrations for use depending on lesion type , sclerosant for intravenous embolization - the compound should be aetoxisclerol - should be available in various concentrations for use depending on lesion type , medical grade ethanolamine oleate for vascular embolization , detachable balloon for embolization - detachable balloons with radioopaque marker with and without self-sealing valve - 0.1 cc – 3 cc or more in capacity - please specify the make and capacity of the balloons (latex/silicon). - the catheter shaft should be of at least 120 cm in length , transjugular liver biopsy set - should include angled tip needle advanced through percutaneously introduced liver access set - should have a firing spring mechanism - needle gauge should be available in 18 and 19g and needle length should be 45-60 cm - the needle throw distance should be not more than 2 cm - should include the check-flo valve adapter, stiffening cannula curved and straight catheter and introducer sheath (upto 7f size) , transjugular intrahepatic porto-systemic shunt access set - should include a micropuncture introducer set -should include an introducer sheath that should be no more than 10f size, at least 38 cm long and 035/038”compatible - the sheath should provide maximum flexibility without getting kinked - the sheath should have proximal check flo mechanism - the sheath should have distal radiopaque tip to indicate sheath tip on fluoroscopy - the set should also include a needle of 16g and at least 50 cm long with angled tip to facilitate directiontowards portal vein - there should be a curved/angled catheter, a straight catheter and a centimeter sizing catheter incorporated in the set for the various steps of the procedure , transjugular liver access set (10f) for various diagnostic and interventional liver procedures - should include a 10f and at least 38 cm long introducer sheath - should include a stiffening cannula of at least 14 gauge and length of at least 51 cm - should include a trochar with stylet that is 035/038” compatible and at least 60 cm long , transjugular liver access set (7-9f) for various diagnostic and interventional liver procedures - should include a 7f or 9f introducer sheath that is at least 38 cm long - should include needle with angled tip that is 16f (for 9f) and 18g (for 7f) sheath - should be 035/038” compatible - the needle shoud be at least 50 cm long , group -f16 , ivc filter - for optimal filtration of ivc diameter of upto 40 mm - made of either nitinol or stainless steel - catheter carrier system inner diameter should be of maximum 12f - it should be possible to insert from either jugular or femoral access - should be for permanent use , ivc filter - for optimal filtration of ivc diameter of upto 28 mm - made of nitinol and filter length to be upto 38 mm - catheter carrier system inner diameter should be of maximum 7f size - it should be for permanent use - it should be possible to place the filter from femoral/jugular/antecubital access , ivc filter - for optimal filtration of ivc diameter of upto 28 mm - made of nitinol and filter length to be upto 55 mm - catheter carrier system inner diameter should be of maximum 10 f size - it should be for optional (permanent or retrievable) use - it should be possible to place the filter from femoral/jugular/antecubital access , ivc filter - for optimal filtration of ivc diameter of upto 30 mm - made of conichrome material and filter length not more than 50 mm - should be able to be placed either through jugular or femoral approach - should be for optional (permanent or temporary) use , percutaneous mechanical thrombectomy catheter - should allow treatment of fresh and older thrombotic occlusions of peripheral arteries - should combines mechanical fragmentation and aspiration alongwith transport of debris outside thevascular system - should be available in both antegrade or cross-over configurations - for antegrade access – maximum shaft size should be 6f - for cross-over access – maximum shaft size should be 8f , urokinase for intra-arterial thrombolysis , tissue plasminogen activator for intra-arterial thrombolysis , infusion catheter - should have multiple side ports - should provide an infusion length of 5-15 cm - should have a catheter tip occluder - should have attachment for tuohy-borst side arm adapter - should have a maximum od of 5f - should be compatible with 035/038” wire - should have a shaft length of 60-100 cm , distal embolic protection device - should be on a .014” wire - should be made of nitinol material - should not occlude flow while in placement - should completely cover the vessel circumference at the desired placement site to afford complete protection - should have the least lesion crossing profile - should be available in various sizes for adapting to the vessel size , distal embolic protection device - should be on a .014” wire - should be made of nitinol material - should not occlude flow while in placement - should be rapid exchange type - should allow use of a separate .014/018” wire for initial crossing of the lesion - should be compatible with a 6f guiding catheter (0.066” id) - should allow longitudinal wire movement with filter remaining in place - should be available in 3-7 mm sizes , group -f17 , endovascular stent graft device for treatment of thoracic aortic aneurysms and dissections - device should be with proximal barbs, with or without distal bare spring configuration, and should beeither tapered or non-tapered. - the aortic device should be available in any one or more of the following sizes: od 26-44 mm; length 4-24 cm. the device should be able to be advanced on upto 24f shaft size. - the manufacturer should agree to supply the size customized to the patient’s anatomy based on ctangiography , endovascular stent graft device for treatment of thoracic aortic aneurysms and dissections - device should be without proximal barbs, without distal bare spring configuration, and should be eithertapered or non-tapered. - the aortic device should be available in any one or more of the following sizes: od 26-44 mm; length 4-24 cm. the device should be able to be advanced on upto 24f shaft size. - the manufacturer should agree to supply the size customized to the patient’s anatomy based on ct angiography , endovascular stent graft device for treatment of thoracic aortic aneurysms and dissection - device should be without proximal barbs, with distal and/or proximal bare spring configurations, andshould be non-tapered. - the aortic device should be available in any one or more of the following sizes: od 26-44 mm; length 4-24 cm. the device should be able to be advanced on up to 24f shaft size. - the manufacturer should agree to supply the size customized to the patient’s anatomy based on ct angiography , endovascular stent graft device for treatment of thoracic aortic aneurysms and dissection - device should be without proximal barbs, with distal and/or proximal bare spring configurations, andshould be tapered. - the aortic device should be available in any one or more of the following sizes: od 12-44 mm; length 4-24 cm. the device should be able to be advanced on upto 24f shaft size. - the manufacturer should agree to supply the size customized to the patient’s anatomy based on ct angiography , endovascular stent graft device for treatment of abdominal aortic aneurysms - device should be with or without proximal barbs, with or without distal bare spring configuration, andshould be either tapered or non-tapered. - devices with or without transrenal or suprarenal fixation should be quoted. - the aortic device should be available in any one or more of the following sizes: od 12-44 mm; length 4-24 cm. the device should be able to be advanced on aupto 24f shaft size. - the limb extensions of the main device for abdominal aortic applications should be available in 12-22 mmdiameter, with or without flared ends and upto 12 cm in length - the manufacturer should agree to supply the size customized to the patient’s anatomy based on ctangiography , endovascular stent graft device for treatment of abdominal aortic aneurysms - device should be with proximal barbs, with or without distal bare spring configuration, and should beeither tapered or non-tapered. - devices with transrenal or suprarenal fixation should be quoted. - the aortic device should be available in any one or more of the following sizes: od 12-44 mm; length 4-24 cm. the device should be able to be advanced on aupto 24f shaft size. - the limb extensions of the main device for abdominal aortic applications should be available in 12-22 mmdiameter, with or without flared ends and upto 12 cm in length - the manufacturer should agree to supply the size customized to the patient’s anatomy based on ctangiography , endovascular stent graft device for treatment of abdominal aortic aneurysms - device should be without proximal barbs, with or without distal bare spring configuration, and should beeither tapered or non-tapered. - devices with transrenal or suprarenal fixation should be quoted. - the aortic device should be available in any one or more of the following sizes: od 12-44 mm; length 4-24 cm. the device should be able to be advanced on aupto 24f shaft size. - the limb extensions of the main device for abdominal aortic applications should be available in 12-22 mmdiameter, with or without flared ends and upto 12 cm in length -the manufacturer should agree to supply the size customized to the patient’s anatomy based on ct angiography , endovascular stent graft device for treatment of abdominal aortic aneurysms - device should be without proximal barbs, with or without distal bare spring configuration, and should beeither tapered or non-tapered. - devices without transrenal fixation should be quoted. - the aortic device should be available in any one or more of the following sizes: od 12-44 mm; length 4-24 cm. the device should be able to be advanced on aupto 24f shaft size. - the limb extensions of the main device for abdominal aortic applications should be available in 12-22 mmdiameter, with or without flared ends and upto 12 cm in length - the manufacturer should agree to supply the size customized to the patient’s anatomy based on ctangiography covered stent-graft (extender or iliac or contralateral limb) in diameters ranging from 12-22 mm and lengths ranging from 30-110 mm for over-the-wire delivery , peripheral vascular catheter for excision of artheroma- should have high rotation speed of the cutting mechanism without causing any trauma to the vessel – , group -g1 , permanent pacemakers with all leads and accessories • ssir, • all single chamber modes and basic pacing programmable parameters. • must have ventricular capture management • the size of lead must be 7 f or less. • the lead must be steroid eluting and should be both bipolar and unipolar configuration. • must have both active and passive fixation endocardial leads available. • life term replacement warranty • direct presence of parent company in india (not only through the distributors) and company mustprovide its trained technical person for each implantation when ever required and for follow upprogramming when it is required. • company must provide at least one programmer exclusively to the cardiology department. • company must quote only the latest model of devices commercially available department. , group -h1 -temporary pacing leads , temporary pacing leads (fda approved) , temporary pacing leads (ce approved) , temporary pacing leads (dcgi approved) , temporary pacing lead: woven interweaved, braided , temporary pacing leads: balloon floatable , bipolar catheter with central lumen038 wire compatible, variable length. , screw - in bipolar temporary pacing lead = 65 cm , temporary lead for internal cardio version , group -h1 -a long sheaths /introducers , long sheaths /introducers-prefaced valved long sheaths for rfa with mullins curve, multipurpose curve, other curves, 7f to 9f, at least 80- cm long, 0.038 wire compatible , long sheaths /introducers-bidirectonal, steerable long sheaths with variablereach, autolock , long sheaths /introducers-brite tip intervention sheath with tip visualization, kink resistant, cold shape able with silicon coating , long sheaths /introducers-introducer sheaths for electrophysiology, with various swartz curves sl 0-4, sr 0-4, 8f, 8.5f,9f , long sheaths /introducers-long sheaths (peel away, slit table, with breakable valve) for special applications like coronary sinus intubation, lateral vein. special curves like renal, hook shape etc , long sheaths /introducers-peel away introducer sheaths with break away hemostatic valves for pacing leads, 5f-12f, 10 cm – 30 cm, optional infusion side port, radio opaque edistal tip and multiple curves , long sheaths /introducers-multiport catheter introducer sheaths , long sheaths /introducers-pacing lead stabilizers , long sheaths /introducers-3-d braided steerable guiding introducer sheath, supporting transseptal crossing, atrial ablation procedures, with one device delivery system having all 8 steering curves (sl and sr), can accommodate multiple sheath sizes , group -h2 (diagnostic ep catheters) the vendor should quote for each catheter separately if prices differ based upon french size, curve,electrode catheter design (electrode size, electrode distance, electrode material) etc. it will be easier if the common catheters used like 6f, josephson curve, electrode configuration 2-5-2-5, stainless steelelectrodes/platinum electrodes are specified first. all cables should be quoted separately. cost mentioned for each item will be compared based on the catheter and cable. must be compatible to st jude ensite precision , quadripolar 6, any , quadripolar 5-7, mullins , quadripolar 5-7, josephson , quadripolar 5-7, his bundle , quadripolar 5-7 4-2, mullins , quadripolar 6, mullins , tripolar 5-7, any , tripolar 6, josephson , hexapolar 6, any , decapolar 5-7, any , decapolar 6, any , decapolar 5-7, any, 2-5-2 , decapolar 5-7, any, 2-2-2 , decapolar 5-7, any, 2-2-2-10-2-2-2-10-2 , ep cathters for pediatric ep work -quadripolar 4 2-5-2- , ep cathters for pediatric ep work -quadripolar 4 , ep cathters for pediatric ep work -decapolar 4 , woven ep diagnostic catheters (woven material with braided conducting wire, ensuring prolonged stability) - , woven ep diagnostic catheters (woven material with braided conducting wire, ensuring prolonged stability) -quadripolar 6 , woven ep diagnostic catheters (woven material with braided conducting wire, ensuring prolonged stability) -quadripolar 5-7 2-5 , woven ep diagnostic catheters (woven material with braided conducting wire, ensuring prolonged stability) -quadripolar 5 -7 , woven ep diagnostic catheters (woven material with braided conducting wire, ensuring prolonged stability) -quadripolar5 -7 , woven ep diagnostic catheters (woven material with braided conducting wire, ensuring prolonged stability) -hexapolar 6 , woven ep diagnostic catheters (woven material with braided conducting wire, ensuring prolonged stability) -decapolar 6 , woven ep diagnostic catheters (woven material with braided conducting wire, ensuring prolonged stability) -decapolar 5 -7 , woven ep diagnostic catheters (woven material with braided conducting wire, ensuring prolonged stability) -decapolar 5 -7 , woven ep diagnostic catheters (woven material with braided conducting wire, ensuring prolonged stability) -decapolar 5 -7 , woven pediatric ep catheters (woven material with braided conducting wire, ensuring prolonged stability) - , woven pediatric ep catheters (woven material with braided conducting wire, ensuring prolonged stability) -quadripolar 4 , woven pediatric ep catheters (woven material with braided conducting wire, ensuring prolonged stability) -quadripolar 4 , woven pediatric ep catheters (woven material with braided conducting wire, ensuring prolonged stability) -decapolar 4 , group –h3 [special catheters for af, flutter, etc(quote all diameters, french size, different electrodes like platinum or stainless steel)] , deflect decaduapolar (20 poles) for a flutter----all diameters , deflectable decapolar (10)(pulm. vein)---all diameters , deflectable decaduapolar (20) (pulm. vein)—all diameters , 2f multipolar (> ten electrodes) for mapping through coronary vasculature , basket catheter with accessory , crista catheter with accessories , other special ep catheters , pacing catheter with angiographic capability • variable sizes • bipolar or quadripolar with appropriate cable • cvp monitoring & angiographic facility , paediatric use: all the above catheters, sheaths, etc, for paediatric use - implying smaller french size like 4f,5f, with certification for use in children , group -h4 (ablation catheters) - (all sizes 4f to 8.5f, all curves a-k, 270, all electrode sizes and spacing, eg.) (all items differing in make/prices need to be mentioned separately. quote separately if different in terms of material, braiding, electrode material platinum or stainless steel etc) quote with appropriate connector to existing ept 1000 and stockert ablators. ept 1000 is not compatible with thermocouple and appropriate catheters/ connectors should be quoted. thermistor catheters would therefore by preferred. in addition give prices of all connector cables /accessories separately. , regular 4mm all , regular 8mm , regular 3.5mm all , regular 8mm , regular 4mm , cool tip (closed) any , irrigated tip (open) any , others any , bidirectional any , omnidirexnl any , group -h5 (catheters, cables, accessories, for carto system and thermocool infusion pump) , navistar catheters regular , navistar catheter irrigated tip , location patch carto system (refstar) , connecting cables for all catheters , access/tubings for cool flow pump and any other accessories , group -h5-a catheters, cables, accessories for endocardial solutions (esi) accessories , navex patches , balloon array , other accessories (quote each separately) , catheters/accessories for loca lisa , reusable defibrillation/transcutaneous pacing patches (suitable for equipment in cath lab, ct2, ct3, ct6) , disposable defibrillation/transcutaneous pacing patches (suitable for equipment in cath lab, ct2, ct3, ct6) , defibrillation/transcutaneous pacing patches for use in infants and children , cryo catheters (and accessories) for ablation of arrhythmias in children and adults , intra cardiac ultrasound/echo catheter for guiding rfa compatible with the existing echo machine at neigrihms (quote all prices of the catheters and accessories) , disposable electrocautery patches for rfa (suitable for stockert and ept 1000 ablators) reusable electrocautery patches for rfa (suitable for stockert and ept 1000 ablators) electrocautery pencils for use in dissection , electrocautery pencils for use in dissection , group -h6 (pacemaker lead extraction systems -mention each system price and also individual accessories) , laser guided lead extraction system with accessories (fda/ce certified) , rf guided lead extraction system with accessories (fda/ce certified) , other extraction systems (fda/ce approved) , accessories for lead extraction like locking stylet, other accessories , intracardiac echocardiographic (ice) catheter , lead locking device for lead extraction with sizing from 0.38mm to 0.58mm compatible with any make &all range of leads, with radiopaque marker at the tip, and a proximal connector and mandrel to deploy the device. , mechanical dilator sheath, with bi-directional rotating 574 degree, while extending the blade just 0.02 inches, with flexible shaft and a static outer shaft. , otherspecific items for advanced cardiac procedure , balloon - expanding type of tavi (transcatheter aortic valve implantation) with all standard accessories for implantation different sizes.available sizes:20mm,21.5mm,23mm,24.5mm,26mm,27.5mm,29mm,30.5mm,32mm , sirolimus eluting bioresorbable coronary vascular scaffold system having various diamter and length of upto 40mm , coronary intravascular lithotripsy catheter system with foot peddel . sizes available 2.5mm, 2.75 mm ,3.0mm,3.5mm& 4.0mmand length 12mm , ptca balloon (semi-compliant) - • monorail (rapid exchange) and over-the-wire (otw) balloons • available in all sizes and lengths

Related Searched Keywords : fibre optic item

List of fibre-optic-item Tenders

Tender for gem bids for 40016 item 10: m9635050060- fibre optic cable 6core sm armoured: item 20: m9635050033 fibre optic cable 12 core sm armoured: item 30: m9635100567 cable- ofc 8f 62.5125micron mult. mode:

Get fibre optic item Tender Alert...

Related Searched Keywords : fibre optic item

State Tenders »

City Tenders »

Keyword Tenders »

Sector Tenders »

Ownership Tenders »

Indian Segment

Browse Tenders

Global Segment

Others

Get in touch with us